The document is a resume for Jakob Burkholder that summarizes his experience and qualifications as a pilot and ground crew member. It lists his education in commercial helicopter piloting, training in various aircraft like the Robinson RH22 and Bell 206, and work experience including as a loadmaster for oil rig crew changes and running aviation fuels for Sky North.
Muhammad Najam has over 13 years of experience in the oil and gas industry as a well logging while drilling engineer and petroleum geologist. He has worked for Baker Hughes and Weatherford in Qatar and Pakistan, logging exploration and production wells. He has a Master's degree in geology and is proficient in well logging tools, data analysis, and formation evaluation to interpret reservoirs and drilling operations.
TALLER DE EDICION AUDIOVISUAL ORGANIZADO POR ASPMASPM
El documento describe una sesión de capacitación sobre edición audiovisual a la que asistieron catorce personas a pesar de la lluvia. Jose, el instructor, les explicó cómo crear montajes de fotos y música fácilmente usando programas comunes como PowerPoint. Les dejó claro que depende del tiempo dedicado y los efectos usados, no de habilidades especiales. Todos quedaron encantados y prometieron practicar lo aprendido, seguros de que sus próximas presentaciones y recuerdos fotográficos mejorarán.
Este documento describe los objetivos de la educación primaria en matemáticas. Se enfoca en desarrollar habilidades de pensamiento como formular conjeturas y resolver problemas, así como trabajar de forma autónoma y colaborativa. También incluye objetivos específicos como interpretar y comunicar cantidades usando el sistema decimal, reconocer patrones de proporcionalidad, analizar datos, y calcular medidas geométricas.
Budget Van Lines Reviews 10 | Moving From MT to IAbrinkleykristy
This customer review summarizes a move from Montana to Iowa using Budget Van Lines in September 2012. The customer said the two movers were excellent but had some issues with the administrative process of the affiliated Empire Relocation Services. Overall the move went well and the customer would use Budget Van Lines again but not Empire Relocation Services.
Este documento presenta un proyecto escolar sobre la honestidad en el aula. El coordinador del proyecto es Carlos Alberto Vargas Ayala y se desarrollará entre mayo y junio utilizando actividades como sopas de letras, diálogos, exposiciones y carteleras con herramientas TIC como Word, Google y Blogger. El proyecto busca promover la honestidad entre los estudiantes a través de investigación y conversaciones sobre el tema.
This document provides a timeline breakdown of visual and audio elements from 0:00 to 1:32. It describes shots of stars outside Earth from 0:00 to 0:26 accompanied by voiceover from one of the robots. From 0:27 to 0:47, the visual shows spaceships flying while space ship sound effects and gunfire are heard. Spaceships are then seen chasing and firing at each other from 0:48 to 1:32, along with voiceover from a robot and sound effects of spaceships, gunfire, and metal clinging.
Muhammad Najam has over 13 years of experience in the oil and gas industry as a well logging while drilling engineer and petroleum geologist. He has worked for Baker Hughes and Weatherford in Qatar and Pakistan, logging exploration and production wells. He has a Master's degree in geology and is proficient in well logging tools, data analysis, and formation evaluation to interpret reservoirs and drilling operations.
TALLER DE EDICION AUDIOVISUAL ORGANIZADO POR ASPMASPM
El documento describe una sesión de capacitación sobre edición audiovisual a la que asistieron catorce personas a pesar de la lluvia. Jose, el instructor, les explicó cómo crear montajes de fotos y música fácilmente usando programas comunes como PowerPoint. Les dejó claro que depende del tiempo dedicado y los efectos usados, no de habilidades especiales. Todos quedaron encantados y prometieron practicar lo aprendido, seguros de que sus próximas presentaciones y recuerdos fotográficos mejorarán.
Este documento describe los objetivos de la educación primaria en matemáticas. Se enfoca en desarrollar habilidades de pensamiento como formular conjeturas y resolver problemas, así como trabajar de forma autónoma y colaborativa. También incluye objetivos específicos como interpretar y comunicar cantidades usando el sistema decimal, reconocer patrones de proporcionalidad, analizar datos, y calcular medidas geométricas.
Budget Van Lines Reviews 10 | Moving From MT to IAbrinkleykristy
This customer review summarizes a move from Montana to Iowa using Budget Van Lines in September 2012. The customer said the two movers were excellent but had some issues with the administrative process of the affiliated Empire Relocation Services. Overall the move went well and the customer would use Budget Van Lines again but not Empire Relocation Services.
Este documento presenta un proyecto escolar sobre la honestidad en el aula. El coordinador del proyecto es Carlos Alberto Vargas Ayala y se desarrollará entre mayo y junio utilizando actividades como sopas de letras, diálogos, exposiciones y carteleras con herramientas TIC como Word, Google y Blogger. El proyecto busca promover la honestidad entre los estudiantes a través de investigación y conversaciones sobre el tema.
This document provides a timeline breakdown of visual and audio elements from 0:00 to 1:32. It describes shots of stars outside Earth from 0:00 to 0:26 accompanied by voiceover from one of the robots. From 0:27 to 0:47, the visual shows spaceships flying while space ship sound effects and gunfire are heard. Spaceships are then seen chasing and firing at each other from 0:48 to 1:32, along with voiceover from a robot and sound effects of spaceships, gunfire, and metal clinging.
The intern completed various objectives over the summer, including processing network request projects, assisting managers, and visiting Verizon facilities. Some specific tasks included installing a fusion kit, observing construction work, and witnessing a generator test. The intern also received network requests, created project definitions and scopes of work, put projects out to bid, and requested funding approval. Courses covered project management, communication skills, and leadership. The intern enjoyed overseeing entire projects, interacting with team members, and site visits. Areas for improvement included updating Verizon systems and providing more efficient training.
This document provides a summary of Don Lewchuk's qualifications and experience as an oilfield professional with over 23 years of experience in drilling and working on oil rigs. It lists his certifications and highlights his experience in various roles such as assistant driller, driller, derrickman, and motorman. It also outlines his skills in areas like leadership, communication, and safety compliance.
Anthoney J Fout is an Airframe and Powerplant Specialist with over 5 years of experience maintaining unmanned aircraft for the military. He has served as the lead mechanic at multiple overseas sites, troubleshooting in-flight emergencies. Fout is fully qualified on two unmanned aircraft platforms and performs preflight checks, engine runs, and component replacements. Prior to his current role, Fout gained experience maintaining general aviation aircraft through apprenticeships and received his Airframe and Powerplant certification from National Aviation Academy. He also served as an infantry team leader in the U.S. Army with a deployment to Iraq.
This curriculum vitae provides information about Malcolm James Wright, including his contact details, work experience, qualifications, and personal skills. Over his career, Malcolm has worked in various roles such as a vinyl door machine operator, deck crew, roustabout, roughneck, and painter. He has over 30 years of experience in fields like engineering, manufacturing, offshore oil and gas, and construction. Malcolm holds many safety and technical certificates relevant to his work experience. He aims to find permanent or contract employment that allows him to work hard and invest in improving his skills.
This document discusses offshore construction in South Korea, specifically the construction of 6th generation drill ships for operations in Brazil beginning in 2011. It outlines the construction process including block construction, outfitting, inspections, and facilities. Key phases include the block stage, hull construction, launching, mechanical completion, commissioning, and sea trials. The goal is to safely and successfully deliver the drill ships for operations in Brazil on schedule.
Air Wtg Blade Inspection And Repair ( 2012 2015, A Division Of Canwindpower...ckuntz
This document summarizes cherry picker and wind turbine maintenance services. It describes two cherry picker models up to 101m in height that can lift up to 400kg and perform maintenance in 15 minutes. Inspection and repair services are offered from 80-100m heights using cherry pickers or rope teams. Training, safety practices, and locations served are also outlined. The contact information provided at the end is for AIR WTG in Ontario, Canada.
King E. Chancellor Jr. has over 22 years of experience in aircraft maintenance and manufacturing. He has held roles as Director of Maintenance and certified inspector at several companies. His experience includes maintenance, repair, and overhaul of helicopters, components, and aircraft structures. He also has experience in welding, machining, and engineering.
Lito B. Espeleta is a Filipino rigger with over 20 years of experience working on offshore oil and gas projects in the UAE and Taiwan. He is currently employed by Enermech/Al Yaseah in Abu Dhabi, UAE, and seeks to further enrich his experiences by working for an organization that encourages growth and development. Espeleta has extensive experience performing rigging and lifting operations, including heavy lifts, crane maintenance, and platform construction and modification work. He also has relevant safety and technical training qualifications.
InterMoor is a global leader in offshore mooring and foundation services with expertise in rig moves, permanent and temporary moorings, suction piles, driven piles, SEPLAs, anchors, and other subsea services. It has resources like facilities, crews, equipment and inventory, as well as experience in areas like rig moves, foundation design and installation. Safety and quality are top priorities, with certifications like ISO 9001. InterMoor adds value through its engineering, fabrication, installation, and support services capabilities.
This document provides a summary of Raymond C. Jeffers' experience working for Halliburton for 38 years in various cementing, special tools, and service coordinator positions both on land and offshore in the Gulf of Mexico. It details his qualifications and skills in cementing, foam cementing, well control, special tools, and casing equipment. The document also lists his employment history and experience in positions such as bulk equipment operator, cementer, service leader, and well site service leader working on floaters, drill ships, and TLPs for various oil companies.
Daniel J. Eck Sr has over 30 years of experience in chemical operations, machine operation, and maintenance. He has extensive skills in forklift operation, batch production, hazardous materials handling, and confined space work. His professional experience includes positions at Aerotek Scientific, Harley Davidson, Alcor Aluminum, UGT, Full Circle Solutions, Millennium Chemical, Genstar/Redland, and Essex Chemical.
George Marshall is a senior rig mechanic with over 25 years of international offshore experience. He has qualifications and experience maintaining all types of equipment on modern drilling platforms. He is interested in chief or senior mechanic positions and has experience in roles such as maintenance supervisor and mechanic. His skills include experience maintaining engines, drilling equipment, planned maintenance programs, and good communication skills. His career history includes positions in Dubai, Louisiana, Nigeria, and the North Sea working on various rigs and platforms. He has extensive safety and technical training qualifications.
Kevin Schroeder is seeking a long term position where he can utilize his skills and experience. He has over 15 years of experience in civil/structural design and the United States Air Force working in roles such as project design lead, unit deployment manager, armament team chief, and weapons load crew member. His most recent experience includes creating 3D models and 2D drawings for civil/structural projects as a civil/structural designer.
This document is a resume for Brendan Andrews, a diesel fitter and mechanical technician with over 20 years of experience in mining, marine, and industrial fields. He has extensive experience maintaining and repairing various heavy equipment and vehicles. His skills include diagnostics, scheduled maintenance, repairs, and ensuring compliance with safety standards. He is seeking a new position where he can utilize his experience and skills in customer service, teamwork, and problem-solving.
I have worked 30 years in the drilling industry, I started my career in the North Sea as a drilling roustabout and worked my way up to the position of main driller, I spent 10 years working in the North Sea and a further 20 years working overseas in Africa, China, Brazil, Australia, U.S.A and Norway on 6th generation Cyber base semi submersibles and drill ships. Also, I have worked on NOV and AKER hydraulic hoisting systems, (RAM RIGS) and have a good knowledge of conventional semi submersibles, jack ups, platforms, and land rigs, working with operating systems such as MH-Wirth/AKER & NOV cyber base drilling equipment. I have strong teamworking skills and the ability to cooperate with others and the ability to work under pressure with Initiative and drive.
- The document provides the objective and professional experience of V.V.VISWANATH. It summarizes his experience in design, drafting, detailing, fabrication and site work for pressure vessels, storage tanks, and piping systems over 15 years. It also lists his current roles and responsibilities as Assistant Manager of Designs at Mahathi Infra Services which includes preparation of design drawings, layouts, and estimates for various oil and gas projects.
Mark Pooke has over 20 years of experience as a design draughtsman and mechanical engineer in the aircraft, defense, and transportation industries. He has extensive experience designing mechanical and electrical systems for applications requiring stringent EMC, moisture, and shock requirements. He is proficient in Solidworks, AutoCAD, and other CAD systems and has worked on projects for companies such as Atmosphere Control International, Page Aerospace, Bombardier, and Litton Systems Canada.
Shaun Raynor has over 30 years of experience in engineering, maintenance, and management roles in the British Royal Air Force and private sector. He has held positions such as Chief Mechanical Technician, Squadron Rectification Controller, Fleet Manager, Production Manager, and Legal Assistant. Raynor's expertise includes aircraft maintenance, quality assurance, health and safety, and project management. He holds qualifications in engineering, management, and safety.
Mohd Nazrul Abrul Razak is a Malaysian national who has worked as a supervisor for Sigur Ros Sdn Bhd since 2004. He has experience in offshore installation projects including floatover barge operations, jacket installations, and pipeline pre-commissioning. Some of his responsibilities include ballasting barges, operating lifting equipment, and coordinating offshore installation activities. He has participated in projects for PETRONAS in Malaysia and Turkmenistan.
The intern completed various objectives over the summer, including processing network request projects, assisting managers, and visiting Verizon facilities. Some specific tasks included installing a fusion kit, observing construction work, and witnessing a generator test. The intern also received network requests, created project definitions and scopes of work, put projects out to bid, and requested funding approval. Courses covered project management, communication skills, and leadership. The intern enjoyed overseeing entire projects, interacting with team members, and site visits. Areas for improvement included updating Verizon systems and providing more efficient training.
This document provides a summary of Don Lewchuk's qualifications and experience as an oilfield professional with over 23 years of experience in drilling and working on oil rigs. It lists his certifications and highlights his experience in various roles such as assistant driller, driller, derrickman, and motorman. It also outlines his skills in areas like leadership, communication, and safety compliance.
Anthoney J Fout is an Airframe and Powerplant Specialist with over 5 years of experience maintaining unmanned aircraft for the military. He has served as the lead mechanic at multiple overseas sites, troubleshooting in-flight emergencies. Fout is fully qualified on two unmanned aircraft platforms and performs preflight checks, engine runs, and component replacements. Prior to his current role, Fout gained experience maintaining general aviation aircraft through apprenticeships and received his Airframe and Powerplant certification from National Aviation Academy. He also served as an infantry team leader in the U.S. Army with a deployment to Iraq.
This curriculum vitae provides information about Malcolm James Wright, including his contact details, work experience, qualifications, and personal skills. Over his career, Malcolm has worked in various roles such as a vinyl door machine operator, deck crew, roustabout, roughneck, and painter. He has over 30 years of experience in fields like engineering, manufacturing, offshore oil and gas, and construction. Malcolm holds many safety and technical certificates relevant to his work experience. He aims to find permanent or contract employment that allows him to work hard and invest in improving his skills.
This document discusses offshore construction in South Korea, specifically the construction of 6th generation drill ships for operations in Brazil beginning in 2011. It outlines the construction process including block construction, outfitting, inspections, and facilities. Key phases include the block stage, hull construction, launching, mechanical completion, commissioning, and sea trials. The goal is to safely and successfully deliver the drill ships for operations in Brazil on schedule.
Air Wtg Blade Inspection And Repair ( 2012 2015, A Division Of Canwindpower...ckuntz
This document summarizes cherry picker and wind turbine maintenance services. It describes two cherry picker models up to 101m in height that can lift up to 400kg and perform maintenance in 15 minutes. Inspection and repair services are offered from 80-100m heights using cherry pickers or rope teams. Training, safety practices, and locations served are also outlined. The contact information provided at the end is for AIR WTG in Ontario, Canada.
King E. Chancellor Jr. has over 22 years of experience in aircraft maintenance and manufacturing. He has held roles as Director of Maintenance and certified inspector at several companies. His experience includes maintenance, repair, and overhaul of helicopters, components, and aircraft structures. He also has experience in welding, machining, and engineering.
Lito B. Espeleta is a Filipino rigger with over 20 years of experience working on offshore oil and gas projects in the UAE and Taiwan. He is currently employed by Enermech/Al Yaseah in Abu Dhabi, UAE, and seeks to further enrich his experiences by working for an organization that encourages growth and development. Espeleta has extensive experience performing rigging and lifting operations, including heavy lifts, crane maintenance, and platform construction and modification work. He also has relevant safety and technical training qualifications.
InterMoor is a global leader in offshore mooring and foundation services with expertise in rig moves, permanent and temporary moorings, suction piles, driven piles, SEPLAs, anchors, and other subsea services. It has resources like facilities, crews, equipment and inventory, as well as experience in areas like rig moves, foundation design and installation. Safety and quality are top priorities, with certifications like ISO 9001. InterMoor adds value through its engineering, fabrication, installation, and support services capabilities.
This document provides a summary of Raymond C. Jeffers' experience working for Halliburton for 38 years in various cementing, special tools, and service coordinator positions both on land and offshore in the Gulf of Mexico. It details his qualifications and skills in cementing, foam cementing, well control, special tools, and casing equipment. The document also lists his employment history and experience in positions such as bulk equipment operator, cementer, service leader, and well site service leader working on floaters, drill ships, and TLPs for various oil companies.
Daniel J. Eck Sr has over 30 years of experience in chemical operations, machine operation, and maintenance. He has extensive skills in forklift operation, batch production, hazardous materials handling, and confined space work. His professional experience includes positions at Aerotek Scientific, Harley Davidson, Alcor Aluminum, UGT, Full Circle Solutions, Millennium Chemical, Genstar/Redland, and Essex Chemical.
George Marshall is a senior rig mechanic with over 25 years of international offshore experience. He has qualifications and experience maintaining all types of equipment on modern drilling platforms. He is interested in chief or senior mechanic positions and has experience in roles such as maintenance supervisor and mechanic. His skills include experience maintaining engines, drilling equipment, planned maintenance programs, and good communication skills. His career history includes positions in Dubai, Louisiana, Nigeria, and the North Sea working on various rigs and platforms. He has extensive safety and technical training qualifications.
Kevin Schroeder is seeking a long term position where he can utilize his skills and experience. He has over 15 years of experience in civil/structural design and the United States Air Force working in roles such as project design lead, unit deployment manager, armament team chief, and weapons load crew member. His most recent experience includes creating 3D models and 2D drawings for civil/structural projects as a civil/structural designer.
This document is a resume for Brendan Andrews, a diesel fitter and mechanical technician with over 20 years of experience in mining, marine, and industrial fields. He has extensive experience maintaining and repairing various heavy equipment and vehicles. His skills include diagnostics, scheduled maintenance, repairs, and ensuring compliance with safety standards. He is seeking a new position where he can utilize his experience and skills in customer service, teamwork, and problem-solving.
I have worked 30 years in the drilling industry, I started my career in the North Sea as a drilling roustabout and worked my way up to the position of main driller, I spent 10 years working in the North Sea and a further 20 years working overseas in Africa, China, Brazil, Australia, U.S.A and Norway on 6th generation Cyber base semi submersibles and drill ships. Also, I have worked on NOV and AKER hydraulic hoisting systems, (RAM RIGS) and have a good knowledge of conventional semi submersibles, jack ups, platforms, and land rigs, working with operating systems such as MH-Wirth/AKER & NOV cyber base drilling equipment. I have strong teamworking skills and the ability to cooperate with others and the ability to work under pressure with Initiative and drive.
- The document provides the objective and professional experience of V.V.VISWANATH. It summarizes his experience in design, drafting, detailing, fabrication and site work for pressure vessels, storage tanks, and piping systems over 15 years. It also lists his current roles and responsibilities as Assistant Manager of Designs at Mahathi Infra Services which includes preparation of design drawings, layouts, and estimates for various oil and gas projects.
Mark Pooke has over 20 years of experience as a design draughtsman and mechanical engineer in the aircraft, defense, and transportation industries. He has extensive experience designing mechanical and electrical systems for applications requiring stringent EMC, moisture, and shock requirements. He is proficient in Solidworks, AutoCAD, and other CAD systems and has worked on projects for companies such as Atmosphere Control International, Page Aerospace, Bombardier, and Litton Systems Canada.
Shaun Raynor has over 30 years of experience in engineering, maintenance, and management roles in the British Royal Air Force and private sector. He has held positions such as Chief Mechanical Technician, Squadron Rectification Controller, Fleet Manager, Production Manager, and Legal Assistant. Raynor's expertise includes aircraft maintenance, quality assurance, health and safety, and project management. He holds qualifications in engineering, management, and safety.
Mohd Nazrul Abrul Razak is a Malaysian national who has worked as a supervisor for Sigur Ros Sdn Bhd since 2004. He has experience in offshore installation projects including floatover barge operations, jacket installations, and pipeline pre-commissioning. Some of his responsibilities include ballasting barges, operating lifting equipment, and coordinating offshore installation activities. He has participated in projects for PETRONAS in Malaysia and Turkmenistan.
1. Jakob
Burkholder
Pilot
and
Ground
Crew
Member
J.R.Burkholder@hotmail.com
210
Lumsden
Avenue,
Toronto
Ontario
M4C
2K3
250-‐500-‐2691
Objective
To
obtain
a
position
as
a
Pilot
and
Ground
Crew
Member.
I
am
willing
to
travel
and
be
away
from
home
for
extended
periods
of
time
to
develop
my
career.
Education
2012
-‐
2013:
Commercial
Helicopter
Pilot
License,
Canadore
College
http://www.canadorecollege.ca
and
Essential
Helicopters
http://www.essentialhelicopters.com,
North
Bay,
Ontario
2008
-‐
2012:
Ontario
Secondary
School
Diploma
(OSSD)
from
East
York
Colligate
Institute,
Toronto,
Ontario
Training
•
64.1
hours
on
Robinson
RH22,
39.6
hours
on
a
Robinson
RH44
Raven2,
6
hours
on
Bell
Jet
Ranger
206
•
Allison
250
c20
Turbine
Engine
Course
by
Essential
Turbines
(explains
part
function
and
mechanics
of
this
engine)
•
Bell
206
Airframe
Course
•
Eurocopter
Factory
Ground
School
for
Astar
350
B,
BA,
B1,
B2,
B3
•
Underwater
Egress
Training
•
Cold
Water
Egress
Training
•
Workplace
Hazardous
Materials
Information
System
(WHMIS),
Human
Factors
and
Workplace
Safety,
First
Aid
and
CPR
Level
C
•
Chainsaw
and
Tree
Felling
Course
(for
landing-‐pad
building
purposes)
•
One
Week
Survival
Training
in
Canadian
Winter
•
G
Class
Drivers
License
(allows
me
to
drive
normal
cars
and
trucks)
Work
Experience
The
Squires
December
2014
-‐
January
2015
•
Works
on
a
snow
removal
team
•
Operates
plow
equipment
and
the
application
of
salt
distribution
in
the
Greater
Toronto
Area
Cove’s
Landscaping
December
2014
-‐
January
2015
•
Worked
as
a
hardscaper
building
retaining
walls,
stair
cases
and
patios
for
residents
of
the
Greater
Vancouver
Area
Qwest
Helicopters
June
2014
-‐
August
2014
•
Was
a
loadmaster
for
oil
rig
crew
changes
on
the
as365
Dauphin
•
Was
in
charge
of
running
sky
North
aviation
fuels
•
Completed
fuel
runs
of
barrels
into
remote
landing
sites
2. Essential
Helicopters
September
2012
-‐
November
2013
•
Completed
tasks
including
fuelling
from
barrels,
doing
oil
changes
on
the
helicopters
under
supervision
of
an
Aircraft
Maintenance
Engineer
(AME)
•
Installation
and
removal
of
crop
spraying
gear
on
helicopters
•
Moved
helicopters
around
the
apron
and
prepped
them
for
flight
•
Helped
the
engineers
in
our
hanger
look
up
technical
specs
for
aviation
radios
and
parts,
shop
cleanup,
and
assistance
with
any
other
maintenance
actions
that
a
student
is
able
to
complete
•
Worked
as
a
Ground
Crew
Member
for
sight
seeing
purposes
Tio’s
Tubs
Inc.
February
2012
-‐
August
2012
•
Worked
as
a
pool
technician
fixing
underground
leaks,
replacing
old
pool
liners
and
plumbing
•
Dug
trenches
for
underground
plumbing
lines
•
Updated
pool
equipment
such
as
pumps,
filters,
salt
systems
and
auto
cleaners
•
Installed
in-‐ground
hot
tubs
and
above-‐ground
hot
tubs
Canadian
Roofing
Company
June
2011
-‐
September
2011
•
Worked
as
a
ground
laborer,
responsible
for
the
cleanliness
of
the
work
site
ensuring
all
waste
materials
were
properly
disposed
of
•
Kept
the
roofers
stocked
with
fresh
supplies
to
keep
the
job
running
smoothly
T.A.M.
(Tate,
Avery,
Monahgan
-‐
Construction
Company)
June
2010
-‐
September
2010
•
Worked
as
a
laborer,
responsible
for
removing
waste
materials
and
bringing
in
new
supplies
•
Dug
trenches
for
underground
pipes
and
wire
systems,
dug
post
holes
for
fences
•
Ensured
demolition
and
reconstruction
of
household
kitchens
Community
Work
•
Spent
an
entire
summer
removing
an
on
water
hanger
for
an
ultra-‐light
water
plane
(building
was
30’X40’
and
25’
tall)
•
Fundraised
for
Ola
Children’s
Project
whose
mission
is
to
feed
malnourished
children
in
the
Dominican
Republic
•
Packed
Christmas
hampers
of
food
at
the
local
Community
Centre
Interests
•
Fly-‐fishing,
hunting,
hiking,
canoeing,
sailing,
shooting
firearms
for
target
sport
and
all
forms
of
music
Personal
•
I
am
a
quick
learner
and
I
am
loyal,
trustworthy,
and
reliable
References
Andrew
Panov
Sr.
Pilot
Qwest
Helicopters
250-‐775-‐0173
Lavern
Ross
President
of
Essential
Helicopters
705-‐476-‐3626
David
Ross
Chief
Pilot
for
Essential
Helicopters
705-‐492-‐8414
James
Armstrong
Flight
instructor
at
Essential
Helicopters
705-‐918-‐1072
Timothy
Wenham
President
of
Tio’s
Tubs
Inc.
647-‐274-‐2660