Lito B. Espeleta is a Filipino rigger with over 20 years of experience working on offshore oil and gas projects in the UAE and Taiwan. He is currently employed by Enermech/Al Yaseah in Abu Dhabi, UAE, and seeks to further enrich his experiences by working for an organization that encourages growth and development. Espeleta has extensive experience performing rigging and lifting operations, including heavy lifts, crane maintenance, and platform construction and modification work. He also has relevant safety and technical training qualifications.

1. LITO B. ESPELETA
# 593 Sitio BulacanTulo, Batangas CityPhilippines 4200
UAE #: +971504185672
Mobile #: 00639475228355/ 00639391816299
Email: espeletalito@yahoo.com.ph
: litoespeleta@gmail.com
_____________________________________________________________________________________
OBJECTIVES:
 TO INRICH MY EXPERIENCES FURTHER IN ORGANIZATION WHICH ENCOURAGES GROUTH AND
DEVELOPMENT.
APPLIED POSITION
RIGGER
Work Experience:
Company : Enermech /Al Yaseah
Abu Dhabi UAE
Inclusive Date : February 02, 2014 up to present
Supply to ZADCO/ACPT
Position : RIGGER
 WORK EXPEREINCE:
RIG ENSCO 104 ADYARD (June 16 – June 23, 2015)
 Dismantled of 3 National Crane Boom for paint and latticerepaired.
ZIRKU ISLAND ZADCO (May 16 – June 13, 2015)

2.  Flare tip Alpha 1.35 ton by 109 Meters height change out
 3 Guy wire replacement
QATAR PETTROLEUM HALUL ISLAND (MARCH 30 – APRIL 03, 2015)
 Liebherr Crane wire rope changesout main and auxiliary.
ZADCO ACPT 1 (March 15 – Sept. 07, 2014)
• Loading and back loading materials on boat.
• Lifting various materials on barge main deck.
• Performed on tandem lifting operation on barge.
• Performed heavy lift on complex platform and barge.
• Erection wellhead tower helicopter deck
• Lifting various materials between barge main deck, wellhead tower and complex
platform.
• Maintenance for all lifting gears.
• Erection of beams, bracing and plates in platform.
• Erection of pipe lines in platform.
• Erection of boat landing in platform.
• Dismantling and erecting whole unit of crane.
• Performed operate overhead cranes.
• Assist for maximum crane load test using water bags and dead weights with crane
inspector.
• Assist maintenance for crane calibration.
• Assist crane inspector for lifting gear campaign for color code.
• Dismantle and installing of boom crane in ZADCO/ACPT
• Assist to Mechanic for refurbish of MK60 Crane, Fukishima Crane and National Crane.
• Dismantle whole unit of crane in Al Hyleh Barge and replacing Liebherr Crane.
Company : Sparrows Offshore / Ados
Abu Dhabi UAE
Inclusive Date : September 2007 – January 21, 2014
Position : OFFSHORE RIGGER
WORK EXPERIENCE:
• Dismantle and installing whole unit of crane in AL HYLEH BARGE.
• Loading and back loading materials on boat.
• Lifting various materials on barge main deck.
• Performed on tandem lifting operation on barge.

3. • Performed heavy lift on complex platform and barge.
• Erection wellhead tower helicopter deck.
• Lifting various materials between barge main deck, wellhead tower and complex
platform.
• Maintenance for all lifting gears.
• Erection of beams, bracing and plates in platform.
• Erection of pipe lines in platform.
• Erection of boat landing in platform.
• Dismantling and erecting whole unit of crane.
• Performed operate overhead cranes.
• Assist for maximum crane load test using water bags and dead weights with crane
inspector.
• Assist maintainer for crane calibration.
• Assist crane inspector for lifting gear campaign for color code.
Company : National Petroleum Construction Company
Abu Dhabi UAE
Inclusive Date : January 26, 2003 – July 2007
Position : RIGGER
WORK EXPERIENCES:
• Conduct of heavy mechanical works.
• Assist loading of modules and jackets in barges.
• Assist inspection of vessel and reactor in refinery.
• Erections of beams, bracing and plates during construction.
• Erection of jacket legs, pipe bracing and mud mats using two cranes.
• Erection of shell plates, floor plates of storage tanks.
• Loading and unloading offshore and onshore materials.
• Performed operate overhead cranes.
• Performed heavy lift on site.
• Performed for tandem lifting operation on site.
• Loading of piling, conductor and coated pipes in barges.
• Grid installation, grid testing, bed isolation assembly, tightening and absorbent sock
loading inside reactor.
• Assist maximum crane load test using dead weights with crane inspector.
• Assist maintainer for crane calibration.
• Assist crane inspector for lifting gear campaign for color coding.

4. Company : Formosa / Daelim Aroma 2 Project
Yunlin Country, Taiwan R.O.C
Inclusive Date : October 22, 1999- July 11, 2000
Position : RIGGER
WORK EXPERIENCES
• Erection of beams, bracing during construction job.
• Performed for tandem lifting operation on site.
• Lifting various materials on site.
• Maintenance for all lifting gears.
• Performed heavy lift on site.
• Grid installation, grid testing, bed isolation assembly, tightening and absorbent sock
loading inside reactor.
• Performed operate overhead cranes.
Company : EEI Corporation
Malampaya Onshore Gas Plant Project
Tabangao, Batanagas City
Inclusive Date : September 10, 2000 – October 2001
Position : RIGGER
WORK EXPERIENCES:
• Erection of beams, bracing during construction job.
• Performed for tandem lifting operation on site.
• Lifting various materials on site.
• Maintenance for all lifting gears.
• Performed heavy lift on site.
• Grid installation, grid testing, bed isolation assembly, tightening and absorbent sock
loading inside reactor.
• Performed operate overhead cranes.
Educational Background:
Vocational Technical Education Skill Development Authority/NMYC
Batangas City
Course: General Electricity
Year Graduated: March 26, 1995
Secondary Batangas National High School

5. Rizal Avenue, Batangas City
Year Graduated: March 25, 1993
Elementary Gulod Elementary School
Gulod Itaas, Batangas City
Year Graduated: April 03, 1987
Trainings/Seminars
Basic Offshore OPITO Approved Course Code - 5700
Safety Induction February 27, 2014
Emergency Training Certicate #: 0058570027021435505
Basic H2S Training OPITO Approved Course Code – 9014
February 26, 2014
H2S Training ZADCO
March 28, 2014
Offshore Survival Gulf Technical and Safety Training Center (L.L.C)
August 2013
Abu Dhabi Marine HSE CHAMPION OF THE YEAR 2011
Operating Company Recognition of Outstanding Performance in Health, Safety and
(ADMA-OPCO) Environment Activities
Offshore Survival Gulf Technical and Safety Training Center (L.L.C)
August 2010
Sparrows Training Rigger Assessment Competent to Undertake Rigging & Lifting Operations
Certificate #: AT.4191
May 05, 2010
HSE Award HSE / Hyundai
ADMA OPCO USSC Modification Project
August 30, 2009
Field Basic Fire Abu Dhabi Marine Operating Company (ADMA-OPCO)
Fighting Course April 06, 2008
Safety Induction Abu Dhabi Marine Operation Company (Adma Opco)
September 2007
Offshore Survival Gulf Technical and Safety Training Center (L.L.C)
September 20, 2007

6. HSE Award National Petroleum Construction Company (NPCC)
Certificate #: (25163)
June 08, 2007
Electrician Technical Education Skill Development Authority/NMYC
(Building) License #: 043950836
June 15, 1995
Character Reference:
Mr. Mostafa El Shimy
Sparrow’s Supervisor
UAE #: 00971507801182
Mr. Samir China
NPCC Supervisor
UAE #: 00971504464559
I hereby certify on my honor that the above statements are true and correct to the best of
my knowledge and belief.
Lito B. Espeleta
Applicant