This document discusses different jail design strategies and considerations for selecting a design for a new jail. It begins by describing the shift in the last 30 years away from the traditional linear jail design to direct and indirect supervision designs. Direct supervision places the correctional officer inside the inmate living area, while indirect supervision separates the officer in a secure control room but still allows continuous observation. The document recommends direct or indirect supervision over the traditional linear design, noting direct supervision allows the closest monitoring but indirect supervision can still provide adequate supervision. It discusses factors like jail size, costs, and staff preferences that should be considered when selecting between direct and indirect supervision designs.
DETENTION is the part of corrections that takes place before.docxkhenry4
DETENTION: is the part of corrections that takes place before trial and the jail is the entry
point into the correctional system. The Jail is the oldest correctional facility. The local or
county sheriff typically operates it. American jails today are quite diversified. They may be
small, large, rural or urban; some are one-tiered, multi-tiered, with all sorts of custody levels.
REGIONAL JAIL is a facility operated under a joint agreement by two or more government
units with a jail board made up of representatives from participating jurisdictions. The jail board
has the authority over policy, budget, operations, and personnel.
LOCKUP is a holding cell that is usually in or adjacent to a police station. A lockup is only
used for temporary housing only; 24 hours or less and pending a transfer to another facility or
release.
PATHS THROUGH THE JAIL
1. Arrest and booking procedures
2. Placement in an individual cell or group holding area ("bullpen")
3. Arraignment and other court action
4. Classification: formal process used to manage the inmate population. It is a method
which objective, consistent decisions are made for inmate housing, treatment needs, work
assignments, and programs.
5. Housing Assignment: after the classification process, an inmate is assigned to a
particular housing area. This housing area, or living space, will be minimum, medium, or
maximum custody. An inmate may also be housed on administrative segregation. A
review of the inmate's current charge/conviction(s), past criminal record, history of
assaultiveness/violence, mental health, medical screening, substance abuse histories, and
other personal data, will determine his custody level. The more dangerous and risk an
inmate is, the higher the custody level. For example, minimum custody is for those
inmates who pose the least security and safety risk to the institution and other persons.
Maximum custody inmates are those that pose a high security and safety risk to the
institution and others.
6. Administrative segregation: special housing for those inmates who:
a. Cannot get along with other inmates in the general population
b. Continually violate the rules of the jail
c. Are extremely violent or dangerous and pose an extreme safety and serious threat
to the operation of the facility
d. Require protective custody
7. Protective Custody: Involves the separation from the general population of those
inmates requiring or requesting protection from other inmates for safety reasons.
8. Programs: various programs and recreation are available for inmates in a jail. Examples
include: educational, religious, G.E.D., Life Skills, Visitation of Friends/Relatives,
Health Classes, Work Force/Trusty, and Drug Education.
9. Release from custody or transfer to another facility
JAIL DESIGNS/TYPES
1. First-generation: these are the oldest types; often featured multi-person cells arranged
in long .
1. Discuss the prison subculture for inmates and correction.docxdurantheseldine
1. Discuss the prison subculture for inmates and
correctional officers.
2. Compare importation theory with exportation theory.
3. Identify different aspects of prison culture that explain
how offenders and officers view the world around them.
4. Discuss how professionalization and the diversification
of correctional staff have impacted the prison subculture.
5. Discuss the impact that prison gangs have had
on prisons, including the traditional prison subculture.
6. Identify the 13 gangs listed in this chapter as the
primary prison gangs in the United States.
7. Explain what prison systems do to control gang
problems that occur in their facilities.
10ch
ap
te
r
Prison
Subculture
and Prison
Gang
Influence
LEARNING OBJECTIVES:
236 Introduction to Corrections
I will stand by my brother
My brother will come before all others
My life is forfeit should I fail my brother
I will honor my brother in peace as in war
Aryan Brotherhood Oath
INTRODUCTION
This chapter provides students with a very unique aspect of the world of corrections. Students will learn that
within the institutional environment, there is a commonality of experiences that arise between those who are
involved; this is true for both inmates and staff. Indeed, many people may not be aware that, in fact, the mind
and the world of the inmate often affect the mind-set of security personnel who work with the inmate. In
essence, there is an exchange of beliefs and perspectives that often come together to produce a unique fusion
between the two groups. This exchange of beliefs creates a unique subculture that is the product of both
inmate norms being brought in from the outside and those taken from the prison to the outside community.
It is important for students to understand that prison staff are not immune to the effects of the
profound social learning that occurs, and, over time, as they become more enmeshed in the prison social
setting, they begin to internalize many of the beliefs and norms held by the prison subculture. While this
may seem to be counterproductive and/or even backward from what one might wish within the prison
environment, this is an inevitable process as prison staff find themselves interacting with the street men-
tality on a day-to-day basis. In actuality, this is a maturing of correctional workers as they begin to see a
world that is not necessarily black and white but instead has many shades of gray. Issues become more
complicated than being simple “good guy and bad guy” situations as correctional workers work with
offenders on a personal level. The nuances and differences between different offenders tend to complicate
what initially might seem like simple decisions.
Because correctional staff interact with these offenders on a daily basis, a sense of understanding
develops both among correctional staff and between staff and the inmate population. Inmates come to expect
certain reactions from correct.
Racial Problems In America Essay. Online assignment writing service.Linda Singleton
Ambrose Paré was a French barber surgeon who lived during the Renaissance and changed Western medicine. Through his experiences treating gunshot wounds on soldiers, he discovered new surgical techniques that treated wounds more effectively with less risk of infection. He documented his methods, which were adopted by other surgeons and helped establish surgery as a more accepted medical practice. His contributions advanced the field of surgery and inadvertently changed the face of Western medicine.
This document is a student project analyzing the use of solitary confinement. It provides background on the history of solitary confinement dating back to the 1800s. It discusses how solitary confinement is implemented in the US and India, noting that in India the maximum period is 3 months not exceeding 14 days at a time. The document also examines the arguments that solitary confinement is inhumane due to the mental health impacts it can have, but others believe it provides necessary protection. It analyzes several court cases related to challenging solitary confinement as cruel and unusual punishment.
Topic- "The Binocular Continuum"
Speaker: Dr Paul Harris
Hello Everyone, Namaste!!
We would like to notify you all that Mero Eye Foundation is going to conduct an "EYE TALKS-Webinar", and we will be having our session live broadcasted on YouTube (Session No. 97)
DATE – Sun, 08:00 p.m NPT, 07:45 p.m IST, 10:15 a.m EDT, 9th August 2020
YouTube Live- https://youtu.be/T4-tn6LKt1w
Learn More - https://www.paulharrisod.com/papers
1. The document discusses various physical and procedural security measures for protecting assets, including barriers like walls and fences, access control systems, locks, alarms, lighting, and CCTV monitoring.
2. It describes different types of motion sensors that can be used to detect intruders, such as microwave, electric field, vibration, infrared, and glass breaking sensors.
3. The security system should be continuously monitored from a central control room and have backup power to function if primary power is lost.
DETENTION is the part of corrections that takes place before.docxkhenry4
DETENTION: is the part of corrections that takes place before trial and the jail is the entry
point into the correctional system. The Jail is the oldest correctional facility. The local or
county sheriff typically operates it. American jails today are quite diversified. They may be
small, large, rural or urban; some are one-tiered, multi-tiered, with all sorts of custody levels.
REGIONAL JAIL is a facility operated under a joint agreement by two or more government
units with a jail board made up of representatives from participating jurisdictions. The jail board
has the authority over policy, budget, operations, and personnel.
LOCKUP is a holding cell that is usually in or adjacent to a police station. A lockup is only
used for temporary housing only; 24 hours or less and pending a transfer to another facility or
release.
PATHS THROUGH THE JAIL
1. Arrest and booking procedures
2. Placement in an individual cell or group holding area ("bullpen")
3. Arraignment and other court action
4. Classification: formal process used to manage the inmate population. It is a method
which objective, consistent decisions are made for inmate housing, treatment needs, work
assignments, and programs.
5. Housing Assignment: after the classification process, an inmate is assigned to a
particular housing area. This housing area, or living space, will be minimum, medium, or
maximum custody. An inmate may also be housed on administrative segregation. A
review of the inmate's current charge/conviction(s), past criminal record, history of
assaultiveness/violence, mental health, medical screening, substance abuse histories, and
other personal data, will determine his custody level. The more dangerous and risk an
inmate is, the higher the custody level. For example, minimum custody is for those
inmates who pose the least security and safety risk to the institution and other persons.
Maximum custody inmates are those that pose a high security and safety risk to the
institution and others.
6. Administrative segregation: special housing for those inmates who:
a. Cannot get along with other inmates in the general population
b. Continually violate the rules of the jail
c. Are extremely violent or dangerous and pose an extreme safety and serious threat
to the operation of the facility
d. Require protective custody
7. Protective Custody: Involves the separation from the general population of those
inmates requiring or requesting protection from other inmates for safety reasons.
8. Programs: various programs and recreation are available for inmates in a jail. Examples
include: educational, religious, G.E.D., Life Skills, Visitation of Friends/Relatives,
Health Classes, Work Force/Trusty, and Drug Education.
9. Release from custody or transfer to another facility
JAIL DESIGNS/TYPES
1. First-generation: these are the oldest types; often featured multi-person cells arranged
in long .
1. Discuss the prison subculture for inmates and correction.docxdurantheseldine
1. Discuss the prison subculture for inmates and
correctional officers.
2. Compare importation theory with exportation theory.
3. Identify different aspects of prison culture that explain
how offenders and officers view the world around them.
4. Discuss how professionalization and the diversification
of correctional staff have impacted the prison subculture.
5. Discuss the impact that prison gangs have had
on prisons, including the traditional prison subculture.
6. Identify the 13 gangs listed in this chapter as the
primary prison gangs in the United States.
7. Explain what prison systems do to control gang
problems that occur in their facilities.
10ch
ap
te
r
Prison
Subculture
and Prison
Gang
Influence
LEARNING OBJECTIVES:
236 Introduction to Corrections
I will stand by my brother
My brother will come before all others
My life is forfeit should I fail my brother
I will honor my brother in peace as in war
Aryan Brotherhood Oath
INTRODUCTION
This chapter provides students with a very unique aspect of the world of corrections. Students will learn that
within the institutional environment, there is a commonality of experiences that arise between those who are
involved; this is true for both inmates and staff. Indeed, many people may not be aware that, in fact, the mind
and the world of the inmate often affect the mind-set of security personnel who work with the inmate. In
essence, there is an exchange of beliefs and perspectives that often come together to produce a unique fusion
between the two groups. This exchange of beliefs creates a unique subculture that is the product of both
inmate norms being brought in from the outside and those taken from the prison to the outside community.
It is important for students to understand that prison staff are not immune to the effects of the
profound social learning that occurs, and, over time, as they become more enmeshed in the prison social
setting, they begin to internalize many of the beliefs and norms held by the prison subculture. While this
may seem to be counterproductive and/or even backward from what one might wish within the prison
environment, this is an inevitable process as prison staff find themselves interacting with the street men-
tality on a day-to-day basis. In actuality, this is a maturing of correctional workers as they begin to see a
world that is not necessarily black and white but instead has many shades of gray. Issues become more
complicated than being simple “good guy and bad guy” situations as correctional workers work with
offenders on a personal level. The nuances and differences between different offenders tend to complicate
what initially might seem like simple decisions.
Because correctional staff interact with these offenders on a daily basis, a sense of understanding
develops both among correctional staff and between staff and the inmate population. Inmates come to expect
certain reactions from correct.
Racial Problems In America Essay. Online assignment writing service.Linda Singleton
Ambrose Paré was a French barber surgeon who lived during the Renaissance and changed Western medicine. Through his experiences treating gunshot wounds on soldiers, he discovered new surgical techniques that treated wounds more effectively with less risk of infection. He documented his methods, which were adopted by other surgeons and helped establish surgery as a more accepted medical practice. His contributions advanced the field of surgery and inadvertently changed the face of Western medicine.
This document is a student project analyzing the use of solitary confinement. It provides background on the history of solitary confinement dating back to the 1800s. It discusses how solitary confinement is implemented in the US and India, noting that in India the maximum period is 3 months not exceeding 14 days at a time. The document also examines the arguments that solitary confinement is inhumane due to the mental health impacts it can have, but others believe it provides necessary protection. It analyzes several court cases related to challenging solitary confinement as cruel and unusual punishment.
Topic- "The Binocular Continuum"
Speaker: Dr Paul Harris
Hello Everyone, Namaste!!
We would like to notify you all that Mero Eye Foundation is going to conduct an "EYE TALKS-Webinar", and we will be having our session live broadcasted on YouTube (Session No. 97)
DATE – Sun, 08:00 p.m NPT, 07:45 p.m IST, 10:15 a.m EDT, 9th August 2020
YouTube Live- https://youtu.be/T4-tn6LKt1w
Learn More - https://www.paulharrisod.com/papers
1. The document discusses various physical and procedural security measures for protecting assets, including barriers like walls and fences, access control systems, locks, alarms, lighting, and CCTV monitoring.
2. It describes different types of motion sensors that can be used to detect intruders, such as microwave, electric field, vibration, infrared, and glass breaking sensors.
3. The security system should be continuously monitored from a central control room and have backup power to function if primary power is lost.
(Design and Development of a Rehabilitative Eye-Tracking Based Home Automatio...Rayan Youssef
Locked-in syndrome is known to be a condition in which a patient loses the ability to control nearly all voluntary muscles in the body except for the eye. In today's world, healthcare facilities have the means and equipment necessary to help such patients and take care of their needs, which includes medical care and patient comfort. However, such dedicated professional services are not commonly provided at the patient's dwelling, and more can still be done when it comes to patient's comfort and self-reliance. This paper delineates the design and development of an eye-tracking based home automation system that provides the targeted locked-in patient with the ability to control appliances using his/her eyes. In the developed system, eye movement, pupil position, size, and velocity are determined using a built-in laptop camera in conjunction with a series of algorithms coded in MATLAB®. The camera is adjusted in such a way so as to be leveled horizontally with the eye-sight of the patient. Further algorithms are to allow the user to control and move the mouse cursor with his/her eye movements. A specially designed graphical user interface provides the individual with the options as to what he/she wishes to control. An Arduino microcontroller differentiates the received instructions from the user and provides an output to the intended device. The controlled appliances within the patient's habitat are doors, window shutters, lightings, bed control, television set, and heating ventilation and air-conditioning. Further modular improvement of this system could be introduced as need arises. The system was validated using a series of tests on normal control individuals. The validation results show high accuracy and precision. The significance of this system lies in helping locked-in patients gain control over some aspects of their lives; accordingly, they will no longer require continuous assistance to secure their comfort but rather be self-reliant.
The document discusses various advances in medical technology in the 21st century, including 4D ultrasound that provides more detailed moving images of fetuses; microfluidic chips that can quickly diagnose the flu; non-invasive methods for detecting diabetes; brain-computer interfaces; ingestible camera pills; smart capsules equipped with tools and sensors; engineered bacteria that prevent tooth decay; artificial lymph nodes; sensors for monitoring asthma and detecting oral cancer from saliva; biological pacemakers; prosthetics that provide feedback to the user; smart contact lenses that monitor eye pressure; speech restoration devices; and absorbable heart stents. The technologies presented help with diagnoses, treatment, and quality of life.
FOR STUDY PURPOSE ONLY, AREA STATEMENT AND DRAWINGS ARE NOT INCLUDED, IT WILL HELP FOR ARCHITECTURAL DESIGN ASPECTS FOR MORE INFORMATION CONTACT- instagram-@vastukar archishivraj@gmail.com
ENTB376ENTB376Data Collection & Use CasesThe Fed.docxkhanpaulita
ENTB376
ENTB376
Data Collection & Use Cases
The Federal Trade Commission (FTC) is the US agency on a mission to protect consumers and promote competition. The FTC protects consumers by stopping unfair, deceptive or fraudulent practices in the marketplace. It conducts investigations, sues companies and people that violate the law, develops rules to ensure a vibrant marketplace, and educates consumers and businesses about their rights and responsibilities. (FTC.gov website). This activity helps you understand the nature of unfair and deceptive trade practices cases undertaken by the FTC involving consumer data collection and use.
Instructions
Select a press release from the approved list below. Address the following points:
1. Describe how the website violated the law, why it was considered an unfair or deceptive trade practice and what penalty was imposed.
2. Explain whether you think the FTC was right or wrong and why you feel that way.
3. In one sentence, what is the lesson to be learned from this situation--what advice would you tell a website operator to reduce the risk of an FTC enforcement action while still achieving marketing or use goals?
Cases
1. Operator of Celebrity Fan Websites to Pay $1 Million to Settle FTC Charges that It Illegally Collected Children's Information Without Their Parents' Consent
2. FTC Charges That Security Flaws in RockYou Game Site Exposed 32 Million Email Addresses and Passwords
3. FTC Sends Educational Letters to Businesses to Help Them Prepare for COPPA Update
4. FTC Settles Charges Against Two Companies That Allegedly Failed to Protect Sensitive Employee Data
5. Iconix Brand Group Settles Charges Its Apparel Web Sites Violated Children's Online
Privacy Protection Act
6. Fandango, Credit Karma Settle FTC Charges that They Deceived Consumers By Failing to
Securely Transmit Sensitive Personal Information
7. FTC Settlement Puts an End to "History Sniffing" by Online Advertising Network Charged
With Deceptively Gathering Data on Consumers
8. FTC Files Complaint Against Wyndham Hotels For Failure to Protect Consumers' Personal
Information
Rev. 08/01/14 1
9. FTC Charges Operators of “Jerk.com” Website With Deceiving Consumers; FTC heads to trial against Jerk.com
10. Marketer of Internet-‐Connected Home Security Video Cameras Settles FTC Charges It
Failed to Protect Consumers' Privacy
11. Myspace Settles FTC Charges That It Misled Millions of Users About Sharing Personal
Information with Advertisers
12. FTC Charges Businesses Exposed Sensitive Information on Peer-‐to-‐Peer File-‐Sharing
Networks, Putting Thousands of Consumers at Risk
13. Membership Reward Service Aimed at College Savers Settles FTC Charges That Its
'TurboSaver Toolbar' Feature Deceptively Collected Consumers' Personal
Information
14. Facebook Settles FTC Charges That It Deceived Consumers By Failing To Keep
Privacy Promises
15. Online Advertiser Settles FTC Charges ScanScout Decepti.
A cyborg is defined as an organism with both organic and biomechatronic body parts. Examples of current cyborgs include humans with pacemakers or other implantable medical devices that use synthetic feedback mechanisms to enhance the body's natural functions. There are two types of cyborgs - restorative cyborgs, which restore lost functions, and enhanced cyborgs, which aim to exceed normal bodily processes or gain new abilities. Brain-computer interfaces are being developed that could allow people to control assistive devices with their thoughts. Researchers have also developed a stretchable electronic membrane that could potentially replace traditional pacemakers and serve as protection against heart attacks. As implantable technologies become more advanced and connected to networks, ensuring their security
1) Finger-scan technology uses the unique ridge patterns of fingerprints to authenticate users. It works by acquiring a fingerprint image, processing it, locating distinctive minutiae points, creating a template, and matching it against stored templates.
2) The fingerprint image is captured and enhanced, then distinctive features like ridge endings and bifurcations are detected. A template of minutiae points is created and stored for matching.
3) Finger-scan technology is widely used and proven accurate due to the long history of fingerprint analysis. However, print quality can vary and environmental factors like cold weather can impact the image.
The proposed study aims to develop a class monitoring system using surveillance cameras for the College of Arts and Sciences at the Eulogio 'Amang' Rodriguez Institute of Science and Technology. The system would monitor classrooms to (1) improve security and awareness on campus, (2) track faculty attendance, and (3) observe classrooms. The researchers assume the system is needed to ensure classrooms are kept orderly and professors are attending classes as scheduled. If implemented, the monitoring system could provide useful information to analyze situations, identify problems, and ensure activities are carried out properly. The scope is limited to CAS classrooms, students, faculty and staff.
The proposed study aims to develop a class monitoring system using surveillance cameras for the College of Arts and Sciences at the Eulogio 'Amang' Rodriguez Institute of Science and Technology. The system would monitor classrooms to (1) improve security and awareness on campus, (2) automate attendance checking for professors, and (3) allow for surveillance of classrooms. The researchers assume the system is needed to maintain order and cleanliness in classrooms and allow administrators to easily check professor attendance rather than visiting each classroom manually. The system could provide useful information for analyzing situations, identifying problems, and ensuring activities are on track. It would be limited to CAS classrooms and focus on monitoring rooms and campus security.
The proposed study aims to develop a class monitoring system using surveillance cameras for the College of Arts and Sciences at the Eulogio 'Amang' Rodriguez Institute of Science and Technology. The system would monitor classrooms to (1) improve security and awareness on campus, (2) automate attendance checking for professors, and (3) allow for surveillance of classrooms. The researchers assume the system is needed to maintain order and cleanliness in classrooms and make it easier to check professor attendance rather than manual room checks. The monitoring system would provide useful information to analyze situations, identify problems, and ensure activities are on track. The scope is limited to CAS classrooms, students, professors and employees.
\\jciprod01\productn\H\HLL\52-1\HLL107.txt unknown Seq: 1 17-MAR-15 10:42
POLICY ESSAY
TOWARD A MORE CONSTITUTIONAL
APPROACH TO SOLITARY CONFINEMENT:
THE CASE FOR REFORM
REPRESENTATIVE CEDRIC RICHMOND
1
The past forty years have brought significant growth in the use of segregation in
penal settings. Prison officials maintain that segregation is an effective tool to
manage dangerous or vulnerable prisoners, but research has demonstrated that
it is being utilized more and more as a commonplace disciplinary tool, deployed
and withdrawn at the discretion of prison and jail management. Researchers
have demonstrated that there are very real human and fiscal costs related to the
segregation of prisoners in isolated settings. The Supreme Court has yet to con-
clude that the use of solitary confinement for prolonged periods is unconstitu-
tional, but evidence suggests that under certain conditions prisoners may
experience such extreme anguish and injury so as to pose a serious inquiry as to
whether cruel and unusual punishment has taken place. Policymakers need to
act to promote more uniform standards for solitary confinement that more
closely comply with the U.S. Constitution. Congress will have a role in promot-
ing reforms to the use of segregation practices in the federal prison system,
administered by the Department of Justice’s Bureau of Prisons. A comprehen-
sive, top down approach is likely unworkable due to federalism implications, but
the federal government is uniquely positioned to work with stakeholders in the
states to reform practices in local prison systems.
I. INTRODUCTION
There is no question that inmates must pay their debts to society, but
justice demands that we extract these payments only within the limits of our
Constitution and accepted standards of human decency. The rising preva-
lence of solitary confinement as an administrative tool for public and private
penitentiaries has also led to a rise in harrowing stories by inmates subjected
to a psychological, emotional, and oftentimes physical hell. Most disturb-
ingly, many of these prisoners are placed in solitary confinement for a pro-
longed or indefinite period of time. This prevalence requires us to reevaluate
whether this practice remains respectful of our laws and values.
This article will address whether the practice of prolonged or indefinite
solitary confinement by prisons should be considered cruel and unusual pun-
ishment under the Eighth Amendment, and whether it violates the due pro-
cess rights of prisoners under the Fourteenth Amendment. It then explores
policy rationales and ideas for addressing this issue.
1 Congressman Cedric L. Richmond represents Louisiana’s 2nd Congressional District in
the United States House of Representatives. He currently serves on the House Committee on
Homeland Security and the House Committee on the Judiciary.
\\jciprod01\productn\H\HLL\52-1\HLL107.txt unknown Seq: 2 17-MAR-15 10:42
2 Harvard Journal on Legislation [Vol. ...
A recent article on neural interfacing in the IEEE Transactions reports that "a Microelectrode array capable of recording from and stimulating peripheral nerves at prolonged intervals after surgical implantation has been demonstrated." These tiny silicon-based arrays were implanted into the peroneal nerves of rats and remained operative for up to 13months. This human computer interface may now lead to a revolutionary organism called as “cybor”, which was thought of as a science -fiction earlier.
The document is a final project proposal that outlines a security plan for ESL Inc., including increasing communication through meetings and updates, beefing up security staffing and patrols, implementing physical security measures like fences, gates and access controls, conducting risk assessments of assets, and establishing policies to mitigate workplace violence and crime through prevention programs, deterrents and reducing opportunities.
This document provides a development project report for improving patient dignity at the North Estonia Medical Centre Foundation. It includes an introduction outlining the objective to gain understanding of hospital systems and services to improve medical care with an emphasis on safety and dignity. It then covers research methods, concepts explored, development process, evaluation, and resources. Key areas of focus from the research included privacy, control, personalization and the healthcare environment as they relate to patient dignity.
1. The document discusses different types of prisons and their purposes, designs, facilities, and security levels. It describes prisons as places that physically confine and deprive people of freedoms, and are used to detain criminals, political prisoners, and prisoners of war.
2. Prisons are designed with high security features like barriers, fences, and guard towers to prevent escapes. Modern designs restrict prisoner movement but allow more direct monitoring. Prisons are divided into different security levels based on prisoner risks, ranging from maximum security to minimum security facilities.
3. The document also discusses special prison types like juvenile detention centers that hold minors, and military prisons that confine prisoners of war and military criminals. Juven
1) The document outlines activities for students to learn about different sensors through hands-on experiments.
2) The activities include evading motion detection, exploring different sensors in toys, making a microphone, learning about the piezoelectric effect, and measuring piezoelectric and pyroelectric responses.
3) For their final project, the students propose a pressure sensor on hospital beds that detects when patients leave their beds and alerts nurses through an alarm and computer application to ensure patient safety.
Human Computer Interaction Unit 1 Chapter 1 Presentation.pptsomeonehacked553
Human-computer interaction (HCI) is the study of how people interact with computers and related technology. HCI aims to improve interactions by making computers more usable and responsive to user needs. HCI is a multidisciplinary field that involves designing, implementing, and evaluating interactive systems used by people. Key aspects of HCI include understanding human cognitive abilities, limitations, and preferences, as well as designing systems using input/output devices that match human capabilities and expectations. The ultimate goal of HCI is to minimize barriers between what users want to accomplish and the computer's understanding of the user's task.
Benjamin Wheeler is developing a wearable biosensor to identify mild traumatic brain injury (mTBI) following head trauma. The sensor uses lipid vesicles containing fluorescent dye that is quenched until a mechanical impact disrupts the vesicles, causing the dye to fluoresce. Preliminary tests show vesicle leakage in response to an electromagnetic shaker. The project aims to 1) characterize the relationship between vesicle leakage and applied force, and 2) create an optimized vesicle-hydrogel sensor for incorporation into protective headwear to allow for on-site mTBI diagnosis.
Crij 103 001 w intro to law and justice summer 2012 schedulesevans-idaho
This document outlines the schedule and assignments for an online course on law and justice over two modules in the summer of 2012. Module 1 takes place over weeks 1 and 2 (June 4-10 and June 11-17) and focuses on readings from the textbook "Law, Justice and Society" as well as weekly discussion questions, individual posts, and article or film responses on topics like the function and purpose of law and justice and law. Students are expected to complete reading assignments, discussion questions, individual posts, and a response paper each week for a total of 25 points per week.
Cwi crij 103 intro to law and justice summer 2012 syllabussevans-idaho
This document provides the syllabus for an online Introduction to Law and Justice course offered during the summer of 2012 at the College of Western Idaho. The syllabus outlines the course objectives, which include gaining an understanding of the criminal justice system and applying sociological and psychological principles to legal issues. Students will be assessed through exams, discussion posts, article responses, and individual posts. The course will be conducted entirely online and expects students to dedicate 12-16 hours per week to be successful.
(Design and Development of a Rehabilitative Eye-Tracking Based Home Automatio...Rayan Youssef
Locked-in syndrome is known to be a condition in which a patient loses the ability to control nearly all voluntary muscles in the body except for the eye. In today's world, healthcare facilities have the means and equipment necessary to help such patients and take care of their needs, which includes medical care and patient comfort. However, such dedicated professional services are not commonly provided at the patient's dwelling, and more can still be done when it comes to patient's comfort and self-reliance. This paper delineates the design and development of an eye-tracking based home automation system that provides the targeted locked-in patient with the ability to control appliances using his/her eyes. In the developed system, eye movement, pupil position, size, and velocity are determined using a built-in laptop camera in conjunction with a series of algorithms coded in MATLAB®. The camera is adjusted in such a way so as to be leveled horizontally with the eye-sight of the patient. Further algorithms are to allow the user to control and move the mouse cursor with his/her eye movements. A specially designed graphical user interface provides the individual with the options as to what he/she wishes to control. An Arduino microcontroller differentiates the received instructions from the user and provides an output to the intended device. The controlled appliances within the patient's habitat are doors, window shutters, lightings, bed control, television set, and heating ventilation and air-conditioning. Further modular improvement of this system could be introduced as need arises. The system was validated using a series of tests on normal control individuals. The validation results show high accuracy and precision. The significance of this system lies in helping locked-in patients gain control over some aspects of their lives; accordingly, they will no longer require continuous assistance to secure their comfort but rather be self-reliant.
The document discusses various advances in medical technology in the 21st century, including 4D ultrasound that provides more detailed moving images of fetuses; microfluidic chips that can quickly diagnose the flu; non-invasive methods for detecting diabetes; brain-computer interfaces; ingestible camera pills; smart capsules equipped with tools and sensors; engineered bacteria that prevent tooth decay; artificial lymph nodes; sensors for monitoring asthma and detecting oral cancer from saliva; biological pacemakers; prosthetics that provide feedback to the user; smart contact lenses that monitor eye pressure; speech restoration devices; and absorbable heart stents. The technologies presented help with diagnoses, treatment, and quality of life.
FOR STUDY PURPOSE ONLY, AREA STATEMENT AND DRAWINGS ARE NOT INCLUDED, IT WILL HELP FOR ARCHITECTURAL DESIGN ASPECTS FOR MORE INFORMATION CONTACT- instagram-@vastukar archishivraj@gmail.com
ENTB376ENTB376Data Collection & Use CasesThe Fed.docxkhanpaulita
ENTB376
ENTB376
Data Collection & Use Cases
The Federal Trade Commission (FTC) is the US agency on a mission to protect consumers and promote competition. The FTC protects consumers by stopping unfair, deceptive or fraudulent practices in the marketplace. It conducts investigations, sues companies and people that violate the law, develops rules to ensure a vibrant marketplace, and educates consumers and businesses about their rights and responsibilities. (FTC.gov website). This activity helps you understand the nature of unfair and deceptive trade practices cases undertaken by the FTC involving consumer data collection and use.
Instructions
Select a press release from the approved list below. Address the following points:
1. Describe how the website violated the law, why it was considered an unfair or deceptive trade practice and what penalty was imposed.
2. Explain whether you think the FTC was right or wrong and why you feel that way.
3. In one sentence, what is the lesson to be learned from this situation--what advice would you tell a website operator to reduce the risk of an FTC enforcement action while still achieving marketing or use goals?
Cases
1. Operator of Celebrity Fan Websites to Pay $1 Million to Settle FTC Charges that It Illegally Collected Children's Information Without Their Parents' Consent
2. FTC Charges That Security Flaws in RockYou Game Site Exposed 32 Million Email Addresses and Passwords
3. FTC Sends Educational Letters to Businesses to Help Them Prepare for COPPA Update
4. FTC Settles Charges Against Two Companies That Allegedly Failed to Protect Sensitive Employee Data
5. Iconix Brand Group Settles Charges Its Apparel Web Sites Violated Children's Online
Privacy Protection Act
6. Fandango, Credit Karma Settle FTC Charges that They Deceived Consumers By Failing to
Securely Transmit Sensitive Personal Information
7. FTC Settlement Puts an End to "History Sniffing" by Online Advertising Network Charged
With Deceptively Gathering Data on Consumers
8. FTC Files Complaint Against Wyndham Hotels For Failure to Protect Consumers' Personal
Information
Rev. 08/01/14 1
9. FTC Charges Operators of “Jerk.com” Website With Deceiving Consumers; FTC heads to trial against Jerk.com
10. Marketer of Internet-‐Connected Home Security Video Cameras Settles FTC Charges It
Failed to Protect Consumers' Privacy
11. Myspace Settles FTC Charges That It Misled Millions of Users About Sharing Personal
Information with Advertisers
12. FTC Charges Businesses Exposed Sensitive Information on Peer-‐to-‐Peer File-‐Sharing
Networks, Putting Thousands of Consumers at Risk
13. Membership Reward Service Aimed at College Savers Settles FTC Charges That Its
'TurboSaver Toolbar' Feature Deceptively Collected Consumers' Personal
Information
14. Facebook Settles FTC Charges That It Deceived Consumers By Failing To Keep
Privacy Promises
15. Online Advertiser Settles FTC Charges ScanScout Decepti.
A cyborg is defined as an organism with both organic and biomechatronic body parts. Examples of current cyborgs include humans with pacemakers or other implantable medical devices that use synthetic feedback mechanisms to enhance the body's natural functions. There are two types of cyborgs - restorative cyborgs, which restore lost functions, and enhanced cyborgs, which aim to exceed normal bodily processes or gain new abilities. Brain-computer interfaces are being developed that could allow people to control assistive devices with their thoughts. Researchers have also developed a stretchable electronic membrane that could potentially replace traditional pacemakers and serve as protection against heart attacks. As implantable technologies become more advanced and connected to networks, ensuring their security
1) Finger-scan technology uses the unique ridge patterns of fingerprints to authenticate users. It works by acquiring a fingerprint image, processing it, locating distinctive minutiae points, creating a template, and matching it against stored templates.
2) The fingerprint image is captured and enhanced, then distinctive features like ridge endings and bifurcations are detected. A template of minutiae points is created and stored for matching.
3) Finger-scan technology is widely used and proven accurate due to the long history of fingerprint analysis. However, print quality can vary and environmental factors like cold weather can impact the image.
The proposed study aims to develop a class monitoring system using surveillance cameras for the College of Arts and Sciences at the Eulogio 'Amang' Rodriguez Institute of Science and Technology. The system would monitor classrooms to (1) improve security and awareness on campus, (2) track faculty attendance, and (3) observe classrooms. The researchers assume the system is needed to ensure classrooms are kept orderly and professors are attending classes as scheduled. If implemented, the monitoring system could provide useful information to analyze situations, identify problems, and ensure activities are carried out properly. The scope is limited to CAS classrooms, students, faculty and staff.
The proposed study aims to develop a class monitoring system using surveillance cameras for the College of Arts and Sciences at the Eulogio 'Amang' Rodriguez Institute of Science and Technology. The system would monitor classrooms to (1) improve security and awareness on campus, (2) automate attendance checking for professors, and (3) allow for surveillance of classrooms. The researchers assume the system is needed to maintain order and cleanliness in classrooms and allow administrators to easily check professor attendance rather than visiting each classroom manually. The system could provide useful information for analyzing situations, identifying problems, and ensuring activities are on track. It would be limited to CAS classrooms and focus on monitoring rooms and campus security.
The proposed study aims to develop a class monitoring system using surveillance cameras for the College of Arts and Sciences at the Eulogio 'Amang' Rodriguez Institute of Science and Technology. The system would monitor classrooms to (1) improve security and awareness on campus, (2) automate attendance checking for professors, and (3) allow for surveillance of classrooms. The researchers assume the system is needed to maintain order and cleanliness in classrooms and make it easier to check professor attendance rather than manual room checks. The monitoring system would provide useful information to analyze situations, identify problems, and ensure activities are on track. The scope is limited to CAS classrooms, students, professors and employees.
\\jciprod01\productn\H\HLL\52-1\HLL107.txt unknown Seq: 1 17-MAR-15 10:42
POLICY ESSAY
TOWARD A MORE CONSTITUTIONAL
APPROACH TO SOLITARY CONFINEMENT:
THE CASE FOR REFORM
REPRESENTATIVE CEDRIC RICHMOND
1
The past forty years have brought significant growth in the use of segregation in
penal settings. Prison officials maintain that segregation is an effective tool to
manage dangerous or vulnerable prisoners, but research has demonstrated that
it is being utilized more and more as a commonplace disciplinary tool, deployed
and withdrawn at the discretion of prison and jail management. Researchers
have demonstrated that there are very real human and fiscal costs related to the
segregation of prisoners in isolated settings. The Supreme Court has yet to con-
clude that the use of solitary confinement for prolonged periods is unconstitu-
tional, but evidence suggests that under certain conditions prisoners may
experience such extreme anguish and injury so as to pose a serious inquiry as to
whether cruel and unusual punishment has taken place. Policymakers need to
act to promote more uniform standards for solitary confinement that more
closely comply with the U.S. Constitution. Congress will have a role in promot-
ing reforms to the use of segregation practices in the federal prison system,
administered by the Department of Justice’s Bureau of Prisons. A comprehen-
sive, top down approach is likely unworkable due to federalism implications, but
the federal government is uniquely positioned to work with stakeholders in the
states to reform practices in local prison systems.
I. INTRODUCTION
There is no question that inmates must pay their debts to society, but
justice demands that we extract these payments only within the limits of our
Constitution and accepted standards of human decency. The rising preva-
lence of solitary confinement as an administrative tool for public and private
penitentiaries has also led to a rise in harrowing stories by inmates subjected
to a psychological, emotional, and oftentimes physical hell. Most disturb-
ingly, many of these prisoners are placed in solitary confinement for a pro-
longed or indefinite period of time. This prevalence requires us to reevaluate
whether this practice remains respectful of our laws and values.
This article will address whether the practice of prolonged or indefinite
solitary confinement by prisons should be considered cruel and unusual pun-
ishment under the Eighth Amendment, and whether it violates the due pro-
cess rights of prisoners under the Fourteenth Amendment. It then explores
policy rationales and ideas for addressing this issue.
1 Congressman Cedric L. Richmond represents Louisiana’s 2nd Congressional District in
the United States House of Representatives. He currently serves on the House Committee on
Homeland Security and the House Committee on the Judiciary.
\\jciprod01\productn\H\HLL\52-1\HLL107.txt unknown Seq: 2 17-MAR-15 10:42
2 Harvard Journal on Legislation [Vol. ...
A recent article on neural interfacing in the IEEE Transactions reports that "a Microelectrode array capable of recording from and stimulating peripheral nerves at prolonged intervals after surgical implantation has been demonstrated." These tiny silicon-based arrays were implanted into the peroneal nerves of rats and remained operative for up to 13months. This human computer interface may now lead to a revolutionary organism called as “cybor”, which was thought of as a science -fiction earlier.
The document is a final project proposal that outlines a security plan for ESL Inc., including increasing communication through meetings and updates, beefing up security staffing and patrols, implementing physical security measures like fences, gates and access controls, conducting risk assessments of assets, and establishing policies to mitigate workplace violence and crime through prevention programs, deterrents and reducing opportunities.
This document provides a development project report for improving patient dignity at the North Estonia Medical Centre Foundation. It includes an introduction outlining the objective to gain understanding of hospital systems and services to improve medical care with an emphasis on safety and dignity. It then covers research methods, concepts explored, development process, evaluation, and resources. Key areas of focus from the research included privacy, control, personalization and the healthcare environment as they relate to patient dignity.
1. The document discusses different types of prisons and their purposes, designs, facilities, and security levels. It describes prisons as places that physically confine and deprive people of freedoms, and are used to detain criminals, political prisoners, and prisoners of war.
2. Prisons are designed with high security features like barriers, fences, and guard towers to prevent escapes. Modern designs restrict prisoner movement but allow more direct monitoring. Prisons are divided into different security levels based on prisoner risks, ranging from maximum security to minimum security facilities.
3. The document also discusses special prison types like juvenile detention centers that hold minors, and military prisons that confine prisoners of war and military criminals. Juven
1) The document outlines activities for students to learn about different sensors through hands-on experiments.
2) The activities include evading motion detection, exploring different sensors in toys, making a microphone, learning about the piezoelectric effect, and measuring piezoelectric and pyroelectric responses.
3) For their final project, the students propose a pressure sensor on hospital beds that detects when patients leave their beds and alerts nurses through an alarm and computer application to ensure patient safety.
Human Computer Interaction Unit 1 Chapter 1 Presentation.pptsomeonehacked553
Human-computer interaction (HCI) is the study of how people interact with computers and related technology. HCI aims to improve interactions by making computers more usable and responsive to user needs. HCI is a multidisciplinary field that involves designing, implementing, and evaluating interactive systems used by people. Key aspects of HCI include understanding human cognitive abilities, limitations, and preferences, as well as designing systems using input/output devices that match human capabilities and expectations. The ultimate goal of HCI is to minimize barriers between what users want to accomplish and the computer's understanding of the user's task.
Benjamin Wheeler is developing a wearable biosensor to identify mild traumatic brain injury (mTBI) following head trauma. The sensor uses lipid vesicles containing fluorescent dye that is quenched until a mechanical impact disrupts the vesicles, causing the dye to fluoresce. Preliminary tests show vesicle leakage in response to an electromagnetic shaker. The project aims to 1) characterize the relationship between vesicle leakage and applied force, and 2) create an optimized vesicle-hydrogel sensor for incorporation into protective headwear to allow for on-site mTBI diagnosis.
Crij 103 001 w intro to law and justice summer 2012 schedulesevans-idaho
This document outlines the schedule and assignments for an online course on law and justice over two modules in the summer of 2012. Module 1 takes place over weeks 1 and 2 (June 4-10 and June 11-17) and focuses on readings from the textbook "Law, Justice and Society" as well as weekly discussion questions, individual posts, and article or film responses on topics like the function and purpose of law and justice and law. Students are expected to complete reading assignments, discussion questions, individual posts, and a response paper each week for a total of 25 points per week.
Cwi crij 103 intro to law and justice summer 2012 syllabussevans-idaho
This document provides the syllabus for an online Introduction to Law and Justice course offered during the summer of 2012 at the College of Western Idaho. The syllabus outlines the course objectives, which include gaining an understanding of the criminal justice system and applying sociological and psychological principles to legal issues. Students will be assessed through exams, discussion posts, article responses, and individual posts. The course will be conducted entirely online and expects students to dedicate 12-16 hours per week to be successful.
1) Law serves to regulate human behavior and transform self-interest into social interest by establishing general rules that bind a community.
2) Scholars have proposed different perspectives on law and its role in society, ranging from it maintaining order and consensus to it perpetuating conflicts between groups.
3) Key thinkers like Plato, Aristotle, Aquinas, Hobbes, and Locke contributed different philosophical views of law and its relationship to concepts like justice, the state, and social contracts.
The document discusses several issues facing the future of corrections, including a lack of clear mission and competing priorities, difficulty choosing effective methods, internal and external structural divisions, challenges in personnel recruitment and motivation, rising costs, and the need for evidence-based practices and professionalization. It proposes three main challenges: reinvigorating correctional leadership, refocusing investments in prevention programs, and reclaiming moral and ethical standards.
This chapter discusses the future of corrections by examining 5 dilemmas, 4 trends, and 3 challenges facing the system. It outlines how the philosophy and methods of corrections have changed, and aspirations for a system focused on evidence-based practices, technology, cost-effectiveness, and professionalism. The key challenges are to develop new leadership promoting best practices, refocus investments on rehabilitation programs, and restore moral and ethical priorities.
The National Academy of Sciences convened a committee to study forensic science needs and issues. The committee made 13 recommendations in its report, including creating a National Institute of Forensic Sciences, standardizing terminology and practices, and improving research, education, oversight and accreditation. The National Institute of Justice recognizes the need for reform and is taking steps like funding research projects and establishing advisory groups to address the report's recommendations.
This document provides a timeline of important events and discoveries in the field of forensic science from BCE to 2002 CE. Some key developments include the first use of fingerprints to solve a crime in 1880, the establishment of the first police crime laboratory in 1910, the development of blood typing techniques in the early 20th century, and the founding of organizations like the American Academy of Forensic Science in 1950 and the Federal Bureau of Investigation crime laboratory in 1932. The timeline is intended as a historical overview of the emerging field of forensic science.
A man was found dead in a bedroom with reddish-brown stains on the walls and carpet, and a broken bottle nearby. The forensic team must collect evidence from the crime scene to determine if the death was from natural causes or foul play. Samples will be analyzed in a lab to uncover clues like DNA, fingerprints, and traces of substances. A forensic pathologist will also examine the body to look for causes of injury or death. The analysis aims to reconstruct what happened and solve the crime.
DNA profiling is a forensic technique that uses a person's unique DNA to identify them. It examines DNA found at crime scenes. Two main techniques are used: Restriction fragment length polymorphism cuts DNA into fragments of varying lengths, which are then compared to suspects' DNA. Short tandem repeat profiling makes copies of DNA sections and examines repetitive patterns that differ between people. DNA profiling is a powerful forensic tool that can include or exclude suspects by matching DNA evidence to their profiles.
Islamic law, or Sharia, originated from the teachings of the Quran and the Prophet Muhammad. It developed over centuries as Islamic legal scholars interpreted Sharia and adapted it to changing circumstances. By the 10th century, the classic Sharia took shape, covering religious, family, property, commercial, and criminal law. It was not a strict legal code but a body of religious scholarship that continued evolving. Modern influences like Western colonialism have led to reforms, but Sharia remains influential in many Muslim-majority nations.
Common law systems like those in the United States and United Kingdom have legal systems that evolve through judicial decisions and rely heavily on legal precedents set in past cases. In civil law systems found in Europe and Latin America, legislative statutes are the primary source of law and judicial decisions have weaker precedential value. Common law systems emphasize procedural correctness and debate during adversarial trials, while civil law prioritizes establishing factual certainty through an inquisitorial judicial examination process.
Canada has two legal systems: common law from England and civil law from France. Common law is based on precedent from past court cases, while civil law relies on codified legal texts. Quebec uses civil law based on codes originating from French rule. The rest of Canada uses common law, with the exception of some Indigenous legal traditions. The Canadian legal system has evolved through influences from both common law and civil law.
This document provides an overview of comparative law and different legal traditions around the world. It discusses the legal systems of preliterate bands and tribes, and the four main modern legal traditions: common law, civil law, socialist law, and Islamic law. It also addresses the rule of law and convergence of legal systems as globalization increases interactions between cultures.
Topic paper week 16 cja 101 intro to criminal justicesevans-idaho
This document provides instructions for a topic paper assignment in a criminal justice course. Students must write a 750-1000 word paper answering one of two questions and including an introduction, body, and conclusion using APA format with at least two cited sources and a reference page. The paper is worth 30 points and is due by the end of the course.
The document discusses different types of terrorism including domestic and international terrorism. It outlines the United States Government Interagency Domestic Terrorism Concept of Operations Plan which coordinates response to domestic threats. It also discusses terror alerts issued by the Department of Homeland Security that aim to inform the public of potential threats and recommend protective actions.
The document discusses how terrorism has affected the US criminal justice system. It details how the US reorganized law enforcement agencies after 9/11 through the creation of the Department of Homeland Security, which consolidated various federal agencies. It also explains how anti-terrorism laws like the USA Patriot Act have expanded law enforcement powers but raised civil liberties concerns.
Topic paper week 14 cja 104 intro to correctionssevans-idaho
This document provides instructions for a topic paper assignment in an Intro to Corrections course. Students must write a 750-1000 word paper answering one of two questions and including an introduction, body, and conclusion using APA format with at least two sources cited. The paper is worth 25 points and requires selecting a topic about how mental health offenders have challenged corrections systems or the most effective juvenile delinquency programs.
This document discusses several special populations within the correctional system, including elderly prisoners, prisoners with HIV/AIDS, mentally ill prisoners, and long-term prisoners. It also covers the history of the juvenile justice system in the US and challenges in sanctioning and treating juvenile offenders, including those involved in gangs. Key topics include medical care and housing needs of special populations, debates around segregating HIV-infected inmates, high rates of mental illness among prisoners, the high costs of life sentences, and balancing rehabilitation and public safety in the juvenile system.
This chapter discusses special populations within corrections including elderly prisoners, prisoners with HIV/AIDS, mentally ill prisoners, and long-term prisoners. It also covers juvenile corrections, including the history of the juvenile justice system in the US, why juveniles are treated differently than adults, challenges with serious juvenile offenders and gangs, and the future of the juvenile justice system. The chapter outlines topics like the aging correctional population, managing HIV-infected inmates, challenges with the incarcerated mentally ill, the extent of youth crime, and factors considered in sanctioning juvenile offenders.
The document provides an overview of the Marshall Trilogy Supreme Court cases from the 1820s-1830s that established foundational principles of federal Indian law. It then discusses the 1905 case United States v. Winans, which faithfully applied these principles. The Marshall Trilogy established that Congress has plenary power over tribes, tribes have inherent sovereignty unless expressly limited, and the federal government holds tribes' lands in trust. It also established canons of construction that treaties should be interpreted in tribes' favor. Winans affirmed tribes' treaty-reserved rights to fish off-reservation, applying congressional plenary power, inherent tribal sovereignty unless limited, the trust doctrine requiring the federal government sue on tribes' behalf, and canons
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...Alex Pruden
Folding is a recent technique for building efficient recursive SNARKs. Several elegant folding protocols have been proposed, such as Nova, Supernova, Hypernova, Protostar, and others. However, all of them rely on an additively homomorphic commitment scheme based on discrete log, and are therefore not post-quantum secure. In this work we present LatticeFold, the first lattice-based folding protocol based on the Module SIS problem. This folding protocol naturally leads to an efficient recursive lattice-based SNARK and an efficient PCD scheme. LatticeFold supports folding low-degree relations, such as R1CS, as well as high-degree relations, such as CCS. The key challenge is to construct a secure folding protocol that works with the Ajtai commitment scheme. The difficulty, is ensuring that extracted witnesses are low norm through many rounds of folding. We present a novel technique using the sumcheck protocol to ensure that extracted witnesses are always low norm no matter how many rounds of folding are used. Our evaluation of the final proof system suggests that it is as performant as Hypernova, while providing post-quantum security.
Paper Link: https://eprint.iacr.org/2024/257
How information systems are built or acquired puts information, which is what they should be about, in a secondary place. Our language adapted accordingly, and we no longer talk about information systems but applications. Applications evolved in a way to break data into diverse fragments, tightly coupled with applications and expensive to integrate. The result is technical debt, which is re-paid by taking even bigger "loans", resulting in an ever-increasing technical debt. Software engineering and procurement practices work in sync with market forces to maintain this trend. This talk demonstrates how natural this situation is. The question is: can something be done to reverse the trend?
The Department of Veteran Affairs (VA) invited Taylor Paschal, Knowledge & Information Management Consultant at Enterprise Knowledge, to speak at a Knowledge Management Lunch and Learn hosted on June 12, 2024. All Office of Administration staff were invited to attend and received professional development credit for participating in the voluntary event.
The objectives of the Lunch and Learn presentation were to:
- Review what KM ‘is’ and ‘isn’t’
- Understand the value of KM and the benefits of engaging
- Define and reflect on your “what’s in it for me?”
- Share actionable ways you can participate in Knowledge - - Capture & Transfer
Must Know Postgres Extension for DBA and Developer during MigrationMydbops
Mydbops Opensource Database Meetup 16
Topic: Must-Know PostgreSQL Extensions for Developers and DBAs During Migration
Speaker: Deepak Mahto, Founder of DataCloudGaze Consulting
Date & Time: 8th June | 10 AM - 1 PM IST
Venue: Bangalore International Centre, Bangalore
Abstract: Discover how PostgreSQL extensions can be your secret weapon! This talk explores how key extensions enhance database capabilities and streamline the migration process for users moving from other relational databases like Oracle.
Key Takeaways:
* Learn about crucial extensions like oracle_fdw, pgtt, and pg_audit that ease migration complexities.
* Gain valuable strategies for implementing these extensions in PostgreSQL to achieve license freedom.
* Discover how these key extensions can empower both developers and DBAs during the migration process.
* Don't miss this chance to gain practical knowledge from an industry expert and stay updated on the latest open-source database trends.
Mydbops Managed Services specializes in taking the pain out of database management while optimizing performance. Since 2015, we have been providing top-notch support and assistance for the top three open-source databases: MySQL, MongoDB, and PostgreSQL.
Our team offers a wide range of services, including assistance, support, consulting, 24/7 operations, and expertise in all relevant technologies. We help organizations improve their database's performance, scalability, efficiency, and availability.
Contact us: info@mydbops.com
Visit: https://www.mydbops.com/
Follow us on LinkedIn: https://in.linkedin.com/company/mydbops
For more details and updates, please follow up the below links.
Meetup Page : https://www.meetup.com/mydbops-databa...
Twitter: https://twitter.com/mydbopsofficial
Blogs: https://www.mydbops.com/blog/
Facebook(Meta): https://www.facebook.com/mydbops/
Northern Engraving | Modern Metal Trim, Nameplates and Appliance PanelsNorthern Engraving
What began over 115 years ago as a supplier of precision gauges to the automotive industry has evolved into being an industry leader in the manufacture of product branding, automotive cockpit trim and decorative appliance trim. Value-added services include in-house Design, Engineering, Program Management, Test Lab and Tool Shops.
AppSec PNW: Android and iOS Application Security with MobSFAjin Abraham
Mobile Security Framework - MobSF is a free and open source automated mobile application security testing environment designed to help security engineers, researchers, developers, and penetration testers to identify security vulnerabilities, malicious behaviours and privacy concerns in mobile applications using static and dynamic analysis. It supports all the popular mobile application binaries and source code formats built for Android and iOS devices. In addition to automated security assessment, it also offers an interactive testing environment to build and execute scenario based test/fuzz cases against the application.
This talk covers:
Using MobSF for static analysis of mobile applications.
Interactive dynamic security assessment of Android and iOS applications.
Solving Mobile app CTF challenges.
Reverse engineering and runtime analysis of Mobile malware.
How to shift left and integrate MobSF/mobsfscan SAST and DAST in your build pipeline.
Northern Engraving | Nameplate Manufacturing Process - 2024Northern Engraving
Manufacturing custom quality metal nameplates and badges involves several standard operations. Processes include sheet prep, lithography, screening, coating, punch press and inspection. All decoration is completed in the flat sheet with adhesive and tooling operations following. The possibilities for creating unique durable nameplates are endless. How will you create your brand identity? We can help!
Conversational agents, or chatbots, are increasingly used to access all sorts of services using natural language. While open-domain chatbots - like ChatGPT - can converse on any topic, task-oriented chatbots - the focus of this paper - are designed for specific tasks, like booking a flight, obtaining customer support, or setting an appointment. Like any other software, task-oriented chatbots need to be properly tested, usually by defining and executing test scenarios (i.e., sequences of user-chatbot interactions). However, there is currently a lack of methods to quantify the completeness and strength of such test scenarios, which can lead to low-quality tests, and hence to buggy chatbots.
To fill this gap, we propose adapting mutation testing (MuT) for task-oriented chatbots. To this end, we introduce a set of mutation operators that emulate faults in chatbot designs, an architecture that enables MuT on chatbots built using heterogeneous technologies, and a practical realisation as an Eclipse plugin. Moreover, we evaluate the applicability, effectiveness and efficiency of our approach on open-source chatbots, with promising results.
"Frontline Battles with DDoS: Best practices and Lessons Learned", Igor IvaniukFwdays
At this talk we will discuss DDoS protection tools and best practices, discuss network architectures and what AWS has to offer. Also, we will look into one of the largest DDoS attacks on Ukrainian infrastructure that happened in February 2022. We'll see, what techniques helped to keep the web resources available for Ukrainians and how AWS improved DDoS protection for all customers based on Ukraine experience
Essentials of Automations: Exploring Attributes & Automation ParametersSafe Software
Building automations in FME Flow can save time, money, and help businesses scale by eliminating data silos and providing data to stakeholders in real-time. One essential component to orchestrating complex automations is the use of attributes & automation parameters (both formerly known as “keys”). In fact, it’s unlikely you’ll ever build an Automation without using these components, but what exactly are they?
Attributes & automation parameters enable the automation author to pass data values from one automation component to the next. During this webinar, our FME Flow Specialists will cover leveraging the three types of these output attributes & parameters in FME Flow: Event, Custom, and Automation. As a bonus, they’ll also be making use of the Split-Merge Block functionality.
You’ll leave this webinar with a better understanding of how to maximize the potential of automations by making use of attributes & automation parameters, with the ultimate goal of setting your enterprise integration workflows up on autopilot.
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-EfficiencyScyllaDB
Freshworks creates AI-boosted business software that helps employees work more efficiently and effectively. Managing data across multiple RDBMS and NoSQL databases was already a challenge at their current scale. To prepare for 10X growth, they knew it was time to rethink their database strategy. Learn how they architected a solution that would simplify scaling while keeping costs under control.
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectorsDianaGray10
Join us to learn how UiPath Apps can directly and easily interact with prebuilt connectors via Integration Service--including Salesforce, ServiceNow, Open GenAI, and more.
The best part is you can achieve this without building a custom workflow! Say goodbye to the hassle of using separate automations to call APIs. By seamlessly integrating within App Studio, you can now easily streamline your workflow, while gaining direct access to our Connector Catalog of popular applications.
We’ll discuss and demo the benefits of UiPath Apps and connectors including:
Creating a compelling user experience for any software, without the limitations of APIs.
Accelerating the app creation process, saving time and effort
Enjoying high-performance CRUD (create, read, update, delete) operations, for
seamless data management.
Speakers:
Russell Alfeche, Technology Leader, RPA at qBotic and UiPath MVP
Charlie Greenberg, host
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
inQuba Webinar Mastering Customer Journey Management with Dr Graham HillLizaNolte
HERE IS YOUR WEBINAR CONTENT! 'Mastering Customer Journey Management with Dr. Graham Hill'. We hope you find the webinar recording both insightful and enjoyable.
In this webinar, we explored essential aspects of Customer Journey Management and personalization. Here’s a summary of the key insights and topics discussed:
Key Takeaways:
Understanding the Customer Journey: Dr. Hill emphasized the importance of mapping and understanding the complete customer journey to identify touchpoints and opportunities for improvement.
Personalization Strategies: We discussed how to leverage data and insights to create personalized experiences that resonate with customers.
Technology Integration: Insights were shared on how inQuba’s advanced technology can streamline customer interactions and drive operational efficiency.
In our second session, we shall learn all about the main features and fundamentals of UiPath Studio that enable us to use the building blocks for any automation project.
📕 Detailed agenda:
Variables and Datatypes
Workflow Layouts
Arguments
Control Flows and Loops
Conditional Statements
💻 Extra training through UiPath Academy:
Variables, Constants, and Arguments in Studio
Control Flow in Studio
"$10 thousand per minute of downtime: architecture, queues, streaming and fin...Fwdays
Direct losses from downtime in 1 minute = $5-$10 thousand dollars. Reputation is priceless.
As part of the talk, we will consider the architectural strategies necessary for the development of highly loaded fintech solutions. We will focus on using queues and streaming to efficiently work and manage large amounts of data in real-time and to minimize latency.
We will focus special attention on the architectural patterns used in the design of the fintech system, microservices and event-driven architecture, which ensure scalability, fault tolerance, and consistency of the entire system.