Jacob Strauch, P.E. - Resume
•
0 likes•28 views
Jacob Strauch is a staff engineer at Dewberry in Richmond, VA with over 6 years of experience in civil engineering. He has expertise in roadway design, drainage design, 3D modeling, cost estimating, and traffic control design. At his current role, he develops storm sewer systems and drainage designs for road widening projects, creates 3D models to evaluate designs, and designs temporary traffic control layouts. Previously as a graduate engineer, he coordinated with utilities on potential conflicts, designed sewer and water lines, and prepared roadway plan sets. He holds a BS in Civil Engineering from Virginia Tech and is a licensed Professional Engineer in Virginia.
Report
Share
Report
Share
Download to read offline
Recommended
CMAX Cleveland Avenue BRT Public Meeting - October 14, 2014
COTA is conducting preliminary design, engineering and environmental clearance for the Cleveland Avenue Bus Rapid Transit (BRT) Project. The proposed service will transport riders between downtown Columbus and Polaris Parkway/Africa Road, connect with existing bus routes, and include new stations. COTA is creating a unique identity for the proposed BRT/Enhanced Bus Service for Cleveland Avenue.
ULI SYMPOSIUM - Beyond P3s - TTC Plays Its Part
This document summarizes a panel discussion on unlocking private development synergies from public infrastructure investments. The panel discussed three case studies of developments near Toronto subway stations that leveraged the transit infrastructure: Hullmark Centre provided two direct subway connections; MaRS Centre improved station accessibility; and KPMG Tower will provide a direct connection from the first office building to the new subway station. The Toronto Transit Commission reviewed over 300 technical submissions annually to support infrastructure while enabling development. Opportunities included new subway connections and accessibility improvements, while challenges involved complex construction near operating subways and meeting TTC standards.
2019 MATC Intern Program - Jack Post
Each summer, MATC interns work with transportation professionals to provide themselves with experiences that will assist them when they enter the field of transportation research.
04 02-15 Caltrain Modernization Updates
The document provides an update on the Peninsula Corridor Electrification Project. It discusses several milestones that have been completed in the electrification procurement process, including releasing a request for proposals and holding a pre-proposal conference and DBE outreach. Upcoming steps include additional amendments, proposal evaluation, and board approval to award a contract in fall 2015. The document also summarizes vehicle procurement milestones, including assessing compatible boarding heights between Caltrain and HSR systems to determine potential impacts and challenges. Next steps include public discussion and a board action to release the vehicle procurement RFP in July.
JordanWeibelsResume
Jordan Weibel has over 5 years of experience managing last mile fiber optic network design, construction, and quality assurance for Google Fiber. He has led engineering change orders to reduce costs and improve design quality. Additionally, he has experience performing field surveys, quality inspections, and ensuring fiber installations meet design specifications. Weibel holds a Bachelor of Science degree in Environmental Science from the University of Missouri - Kansas City, where he was also president and MVP of the men's rugby team.
2009 DREAM Construction Issues
This document discusses downtown construction issues and planning and design considerations for projects. It focuses on projects involving both private and public buildings and property, as well as the public right-of-way. Specific topics covered include the Americans with Disabilities Act requirements for public projects, planning and design processes and stakeholders, a case study of improvements to Olive Boulevard in Creve Coeur, Missouri, and tips for addressing accessibility in public rights-of-way projects.
Tysons Boulevard and Galleria Drive Pedestrian Access Improvements
The Tysons Boulevard & Galleria Drive Pedestrian Access Improvements project eliminated a dual right turn movement from Tyson’s Blvd onto Galleria Dr. and replaced it with a single turn movement into the existing acceleration lane. The project also included removal of existing pavement and portions of medians, full depth pavement, mill and overlay, new pedestrian signals, pavement markings and signing, sidewalk and drainage improvements.
Perpetual Asphalt Pavement Awards
The Asphalt Pavement Alliance recognizes asphalt pavements that have lasted at least 35 years through the Perpetual Pavement Awards program. To be eligible, pavements must be at least 35 years old, never had a structural failure, been resurfaced no more than once every 13 years, and had less than 4 inches of added material over 35 years. Since 2001, 156 awards have been given across 31 U.S. states and one Canadian province for pavements averaging 46.4 years old. Two new award categories have been introduced for pavements designed and constructed to last perpetually from the beginning.
Recommended
CMAX Cleveland Avenue BRT Public Meeting - October 14, 2014
COTA is conducting preliminary design, engineering and environmental clearance for the Cleveland Avenue Bus Rapid Transit (BRT) Project. The proposed service will transport riders between downtown Columbus and Polaris Parkway/Africa Road, connect with existing bus routes, and include new stations. COTA is creating a unique identity for the proposed BRT/Enhanced Bus Service for Cleveland Avenue.
ULI SYMPOSIUM - Beyond P3s - TTC Plays Its Part
This document summarizes a panel discussion on unlocking private development synergies from public infrastructure investments. The panel discussed three case studies of developments near Toronto subway stations that leveraged the transit infrastructure: Hullmark Centre provided two direct subway connections; MaRS Centre improved station accessibility; and KPMG Tower will provide a direct connection from the first office building to the new subway station. The Toronto Transit Commission reviewed over 300 technical submissions annually to support infrastructure while enabling development. Opportunities included new subway connections and accessibility improvements, while challenges involved complex construction near operating subways and meeting TTC standards.
2019 MATC Intern Program - Jack Post
Each summer, MATC interns work with transportation professionals to provide themselves with experiences that will assist them when they enter the field of transportation research.
04 02-15 Caltrain Modernization Updates
The document provides an update on the Peninsula Corridor Electrification Project. It discusses several milestones that have been completed in the electrification procurement process, including releasing a request for proposals and holding a pre-proposal conference and DBE outreach. Upcoming steps include additional amendments, proposal evaluation, and board approval to award a contract in fall 2015. The document also summarizes vehicle procurement milestones, including assessing compatible boarding heights between Caltrain and HSR systems to determine potential impacts and challenges. Next steps include public discussion and a board action to release the vehicle procurement RFP in July.
JordanWeibelsResume
Jordan Weibel has over 5 years of experience managing last mile fiber optic network design, construction, and quality assurance for Google Fiber. He has led engineering change orders to reduce costs and improve design quality. Additionally, he has experience performing field surveys, quality inspections, and ensuring fiber installations meet design specifications. Weibel holds a Bachelor of Science degree in Environmental Science from the University of Missouri - Kansas City, where he was also president and MVP of the men's rugby team.
2009 DREAM Construction Issues
This document discusses downtown construction issues and planning and design considerations for projects. It focuses on projects involving both private and public buildings and property, as well as the public right-of-way. Specific topics covered include the Americans with Disabilities Act requirements for public projects, planning and design processes and stakeholders, a case study of improvements to Olive Boulevard in Creve Coeur, Missouri, and tips for addressing accessibility in public rights-of-way projects.
Tysons Boulevard and Galleria Drive Pedestrian Access Improvements
The Tysons Boulevard & Galleria Drive Pedestrian Access Improvements project eliminated a dual right turn movement from Tyson’s Blvd onto Galleria Dr. and replaced it with a single turn movement into the existing acceleration lane. The project also included removal of existing pavement and portions of medians, full depth pavement, mill and overlay, new pedestrian signals, pavement markings and signing, sidewalk and drainage improvements.
Perpetual Asphalt Pavement Awards
The Asphalt Pavement Alliance recognizes asphalt pavements that have lasted at least 35 years through the Perpetual Pavement Awards program. To be eligible, pavements must be at least 35 years old, never had a structural failure, been resurfaced no more than once every 13 years, and had less than 4 inches of added material over 35 years. Since 2001, 156 awards have been given across 31 U.S. states and one Canadian province for pavements averaging 46.4 years old. Two new award categories have been introduced for pavements designed and constructed to last perpetually from the beginning.
MSG Resume_Kalabat, Iden_2015
Iden Kalabat has over 2 years of experience in roadway and site/civil design projects. He has worked on projects for the Michigan Department of Transportation, City of Detroit, University of Michigan, and private clients. His experience includes design of roadway infrastructure, site plans, drainage, permitting, and construction oversight. Iden is proficient in CAD programs MicroStation and AutoCAD Civil 3D.
Heather McCall Resume
Heather McCall has over 20 years of experience in civil engineering with a focus on water resources, drainage, and stormwater management. She holds a B.S. in Civil Engineering from Cornell University and is a licensed Professional Engineer in Maine. McCall has worked as the president of her own consulting firm, McCall Engineers, LLC, since 2011 providing civil engineering services. She also has extensive experience working for private companies and the Maryland State Highway Administration conducting drainage design, project management, and research.
successful applications of project visualization
This document summarizes a presentation on the successful applications of project visualization. It includes two case studies from Connecticut: the Walk Bridge Program in Norwalk and the I-95 New Haven Harbor Crossing Corridor Improvement Program. For both case studies, project visualizations were used during design and construction to facilitate collaboration, communicate plans to stakeholders, and reduce risks and costs. Visualizations allowed all parties to understand designs, evaluate construction approaches, and coordinate logistics. They also supported public outreach by illustrating planned and completed work. Overall, the document presents how visualizing projects from early stages can improve decision-making, engagement, and outcomes.
Resume - Nick Fuentes
Nick Fuentes has experience as a project engineer intern for several construction companies in California. He has a bachelor's degree in construction engineering and management from San Diego State University. His experience includes reviewing plans and means and methods, cost accounting, document control, scheduling, and quantity takeoffs. He has worked on transportation and healthcare projects of various sizes involving bridge construction, grade separations, and hospital facilities.
Resume pe civil
This document is a resume for Kim D. Scattarella, a civil engineer seeking a position as a project engineer or project manager. It summarizes her 20 years of experience in areas such as utility engineering, surface water management, project engineering, management, and administration for various municipalities. It also lists her education and certifications that qualify her for these roles.
CV-06-20-16 Maher Abu Mallouh
Maher Abu-Mallouh has over 32 years of engineering experience, including 20 years working on major railroad projects in New York and Chicago. He has experience managing the design and construction of various types of railroad infrastructure. Most recently, he has worked as the resident engineer for the construction of a new bus command center in New York City with a budget of $51 million. He is a licensed professional engineer with experience in structural design, construction management, and project management.
train civil engineering courses for professionals and dimmies the trainingvguide
train civil engineering courses for professionals and dimmies
the trainingvguide
Kueny Resume 20
Michael R. Kueny is seeking a position as a project engineer with experience in civil engineering, CAD, and hydrology. He has a MS in Environmental Science and Engineering from Colorado School of Mines and BS degrees in Civil Engineering and Economics from Missouri University of Science & Technology. His experience includes producing construction drawings, cost estimates, drainage reports, and ALTA surveys at several engineering firms over the past 13 years.
Kueny Resume 20
Michael R. Kueny is seeking a position as a project engineer with experience in civil engineering, CAD, and GIS. He has a MS in Environmental Science and Engineering from Colorado School of Mines and a BS in Civil Engineering and Economics from Missouri University of Science & Technology. His experience includes producing construction drawings, cost estimates, ALTA surveys, flood studies, drainage designs, and municipal utilities designs for firms like Paragon Associates, Erdman Engineering, and Martin/Martin Consulting Engineers.
Upp scoping session presentation 4 4-2019
The document summarizes a public scoping session for an environmental impact report for a proposed mixed-use development project in Emeryville, California. The project would demolish an existing building and develop a 54-story residential tower with 638 units, a 15-story office tower, and a 0.5-acre park. The scoping session overviewed the proposed project, the CEQA environmental review process, and areas to be analyzed in the draft EIR such as transportation, air quality, greenhouse gases, and alternatives. Attendees were invited to provide comments to help scope the draft EIR analysis.
CV- Matt Dowie-extended
Matt Dowie has over 16 years of experience in engineering consulting and CAD management. He is proficient in various CAD software packages including AutoCAD, Civil 3D, REVIT, and Microstation. He has worked on a wide range of infrastructure projects such as highways, drainage, rail, and buildings. Currently, he runs his own CAD consulting business delivering CAD solutions and training.
Stephen Wiafe - Resume
Stephen Wiafe has over 20 years of experience in CAD drafting and design, project management, and computer security. He has extensive skills in software such as AutoCAD, MicroStation, ArcGIS, and Adobe. He has worked on a wide range of projects for government agencies and private companies, preparing drawings of sites, facilities, and infrastructure. His experience includes drafting designs for transportation and construction projects, as well as environmental site assessments and remediation plans.
eBook-MicroStation-Civil-Engineering.pdf
MicroStation software provides civil engineers with tools to improve design workflows and deliver projects more efficiently. It allows teams to incorporate various file formats, leverage multiple disciplines, and scale designs for both large and small projects. MicroStation also helps ensure quality deliverables are completed on time through integrated 3D modeling capabilities, real-world context, and automated output of plan sets and other documentation. Case studies demonstrate how MicroStation has helped civil engineering firms accelerate designs, reduce errors and costs, and improve collaboration across large project teams.
Leslie Lopena_CV
Leslie Lopena is a civil engineer from the Philippines with over 12 years of experience in engineering design and construction management in the Gulf region. He received a Bachelor's degree in Civil Engineering from the Philippines in 2003. His professional experience includes designing water distribution systems, drainage networks, and road alignments using software such as AutoCAD, AutoCAD Civil 3D, WaterCAD, and EPANET. He is currently working as a Civil Design Engineer for Parsons International Limited in Qatar, where he reviews technical documents and responds to contractor requests for projects such as parks and parking structures.
AFRICA PROSPECTS_ DSC_2008_GVSRAO
DS Construction is an African construction company that provides a range of services including infrastructure development, engineering design, construction, and project management. It has a vision of being a leading, vibrant, and global company that fosters human development through technical skills and teamwork. The document then highlights some of DS Construction's past projects in Africa spanning sectors like transportation, water, energy, and community development.
Project Summary in Hyder Consulting
This document summarizes the projects and responsibilities of an Assistant Engineer working at Hyder Consulting Middle East from 2012 to present. It describes several major expressway and infrastructure projects in Qatar involving road design, drainage, utilities, and sewerage systems. The engineer's responsibilities included leading design efforts, coordinating with other teams, liaising with stakeholders, addressing design reviews, and preparing reports and tender documents.
Resume of Eng.Ali
Ali Alazawi has over 10 years of experience in civil engineering and project management. He has worked on industrial, commercial, and residential site development projects. Alazawi is proficient in AutoCAD, Civil 3D, Revit, Primavera P6, and Microsoft Office applications. He currently works as an instructor of CAD and BIM software at Houston Community College.
CraigMcDermottPDF2
Craig McDermott is a Project Engineer with over 7 years of experience managing heavy highway and civil construction projects for Caltrans and private developers. He has managed over $150 million of projects, completing some 3-6 months ahead of schedule. McDermott has experience in design-build, joint venture projects, construction manager at risk projects, estimating, and bilingual communication. He is proficient in project management software, CAD, and engineering design tools.
Naveed Asif C.V Updated
The document provides a summary of Naveed Asif's experience and qualifications. It summarizes that he has over 12 years of experience as a chief surveyor working on infrastructure projects in the UAE. It also lists his academic qualifications which include a diploma in land surveying. It then provides details of his professional experience working as a chief surveyor on major road and infrastructure projects in Abu Dhabi worth billions of dollars.
Devore vvcc feb 13 2013 final
This document provides information about a project to improve the Devore Interchange on I-15 in San Bernardino County, California. The project aims to address current and future traffic congestion issues by adding lanes, improving local interchanges, and separating truck and automobile traffic. It will be delivered using a design-build approach and is expected to be completed by 2016 after right of way acquisitions and design work are finished by 2014. Public outreach efforts will provide ongoing information to local communities during the project.
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
The need for ecofriendly materials as building materials in this century cannot be overemphasized
Sri Guru Hargobind Ji - Bandi Chor Guru.pdf
Sri Guru Hargobind Ji (19 June 1595 - 3 March 1644) is revered as the Sixth Nanak.
• On 25 May 1606 Guru Arjan nominated his son Sri Hargobind Ji as his successor. Shortly
afterwards, Guru Arjan was arrested, tortured and killed by order of the Mogul Emperor
Jahangir.
• Guru Hargobind's succession ceremony took place on 24 June 1606. He was barely
eleven years old when he became 6th Guru.
• As ordered by Guru Arjan Dev Ji, he put on two swords, one indicated his spiritual
authority (PIRI) and the other, his temporal authority (MIRI). He thus for the first time
initiated military tradition in the Sikh faith to resist religious persecution, protect
people’s freedom and independence to practice religion by choice. He transformed
Sikhs to be Saints and Soldier.
• He had a long tenure as Guru, lasting 37 years, 9 months and 3 days
More Related Content
Similar to Jacob Strauch, P.E. - Resume
MSG Resume_Kalabat, Iden_2015
Iden Kalabat has over 2 years of experience in roadway and site/civil design projects. He has worked on projects for the Michigan Department of Transportation, City of Detroit, University of Michigan, and private clients. His experience includes design of roadway infrastructure, site plans, drainage, permitting, and construction oversight. Iden is proficient in CAD programs MicroStation and AutoCAD Civil 3D.
Heather McCall Resume
Heather McCall has over 20 years of experience in civil engineering with a focus on water resources, drainage, and stormwater management. She holds a B.S. in Civil Engineering from Cornell University and is a licensed Professional Engineer in Maine. McCall has worked as the president of her own consulting firm, McCall Engineers, LLC, since 2011 providing civil engineering services. She also has extensive experience working for private companies and the Maryland State Highway Administration conducting drainage design, project management, and research.
successful applications of project visualization
This document summarizes a presentation on the successful applications of project visualization. It includes two case studies from Connecticut: the Walk Bridge Program in Norwalk and the I-95 New Haven Harbor Crossing Corridor Improvement Program. For both case studies, project visualizations were used during design and construction to facilitate collaboration, communicate plans to stakeholders, and reduce risks and costs. Visualizations allowed all parties to understand designs, evaluate construction approaches, and coordinate logistics. They also supported public outreach by illustrating planned and completed work. Overall, the document presents how visualizing projects from early stages can improve decision-making, engagement, and outcomes.
Resume - Nick Fuentes
Nick Fuentes has experience as a project engineer intern for several construction companies in California. He has a bachelor's degree in construction engineering and management from San Diego State University. His experience includes reviewing plans and means and methods, cost accounting, document control, scheduling, and quantity takeoffs. He has worked on transportation and healthcare projects of various sizes involving bridge construction, grade separations, and hospital facilities.
Resume pe civil
This document is a resume for Kim D. Scattarella, a civil engineer seeking a position as a project engineer or project manager. It summarizes her 20 years of experience in areas such as utility engineering, surface water management, project engineering, management, and administration for various municipalities. It also lists her education and certifications that qualify her for these roles.
CV-06-20-16 Maher Abu Mallouh
Maher Abu-Mallouh has over 32 years of engineering experience, including 20 years working on major railroad projects in New York and Chicago. He has experience managing the design and construction of various types of railroad infrastructure. Most recently, he has worked as the resident engineer for the construction of a new bus command center in New York City with a budget of $51 million. He is a licensed professional engineer with experience in structural design, construction management, and project management.
train civil engineering courses for professionals and dimmies the trainingvguide
train civil engineering courses for professionals and dimmies
the trainingvguide
Kueny Resume 20
Michael R. Kueny is seeking a position as a project engineer with experience in civil engineering, CAD, and hydrology. He has a MS in Environmental Science and Engineering from Colorado School of Mines and BS degrees in Civil Engineering and Economics from Missouri University of Science & Technology. His experience includes producing construction drawings, cost estimates, drainage reports, and ALTA surveys at several engineering firms over the past 13 years.
Kueny Resume 20
Michael R. Kueny is seeking a position as a project engineer with experience in civil engineering, CAD, and GIS. He has a MS in Environmental Science and Engineering from Colorado School of Mines and a BS in Civil Engineering and Economics from Missouri University of Science & Technology. His experience includes producing construction drawings, cost estimates, ALTA surveys, flood studies, drainage designs, and municipal utilities designs for firms like Paragon Associates, Erdman Engineering, and Martin/Martin Consulting Engineers.
Upp scoping session presentation 4 4-2019
The document summarizes a public scoping session for an environmental impact report for a proposed mixed-use development project in Emeryville, California. The project would demolish an existing building and develop a 54-story residential tower with 638 units, a 15-story office tower, and a 0.5-acre park. The scoping session overviewed the proposed project, the CEQA environmental review process, and areas to be analyzed in the draft EIR such as transportation, air quality, greenhouse gases, and alternatives. Attendees were invited to provide comments to help scope the draft EIR analysis.
CV- Matt Dowie-extended
Matt Dowie has over 16 years of experience in engineering consulting and CAD management. He is proficient in various CAD software packages including AutoCAD, Civil 3D, REVIT, and Microstation. He has worked on a wide range of infrastructure projects such as highways, drainage, rail, and buildings. Currently, he runs his own CAD consulting business delivering CAD solutions and training.
Stephen Wiafe - Resume
Stephen Wiafe has over 20 years of experience in CAD drafting and design, project management, and computer security. He has extensive skills in software such as AutoCAD, MicroStation, ArcGIS, and Adobe. He has worked on a wide range of projects for government agencies and private companies, preparing drawings of sites, facilities, and infrastructure. His experience includes drafting designs for transportation and construction projects, as well as environmental site assessments and remediation plans.
eBook-MicroStation-Civil-Engineering.pdf
MicroStation software provides civil engineers with tools to improve design workflows and deliver projects more efficiently. It allows teams to incorporate various file formats, leverage multiple disciplines, and scale designs for both large and small projects. MicroStation also helps ensure quality deliverables are completed on time through integrated 3D modeling capabilities, real-world context, and automated output of plan sets and other documentation. Case studies demonstrate how MicroStation has helped civil engineering firms accelerate designs, reduce errors and costs, and improve collaboration across large project teams.
Leslie Lopena_CV
Leslie Lopena is a civil engineer from the Philippines with over 12 years of experience in engineering design and construction management in the Gulf region. He received a Bachelor's degree in Civil Engineering from the Philippines in 2003. His professional experience includes designing water distribution systems, drainage networks, and road alignments using software such as AutoCAD, AutoCAD Civil 3D, WaterCAD, and EPANET. He is currently working as a Civil Design Engineer for Parsons International Limited in Qatar, where he reviews technical documents and responds to contractor requests for projects such as parks and parking structures.
AFRICA PROSPECTS_ DSC_2008_GVSRAO
DS Construction is an African construction company that provides a range of services including infrastructure development, engineering design, construction, and project management. It has a vision of being a leading, vibrant, and global company that fosters human development through technical skills and teamwork. The document then highlights some of DS Construction's past projects in Africa spanning sectors like transportation, water, energy, and community development.
Project Summary in Hyder Consulting
This document summarizes the projects and responsibilities of an Assistant Engineer working at Hyder Consulting Middle East from 2012 to present. It describes several major expressway and infrastructure projects in Qatar involving road design, drainage, utilities, and sewerage systems. The engineer's responsibilities included leading design efforts, coordinating with other teams, liaising with stakeholders, addressing design reviews, and preparing reports and tender documents.
Resume of Eng.Ali
Ali Alazawi has over 10 years of experience in civil engineering and project management. He has worked on industrial, commercial, and residential site development projects. Alazawi is proficient in AutoCAD, Civil 3D, Revit, Primavera P6, and Microsoft Office applications. He currently works as an instructor of CAD and BIM software at Houston Community College.
CraigMcDermottPDF2
Craig McDermott is a Project Engineer with over 7 years of experience managing heavy highway and civil construction projects for Caltrans and private developers. He has managed over $150 million of projects, completing some 3-6 months ahead of schedule. McDermott has experience in design-build, joint venture projects, construction manager at risk projects, estimating, and bilingual communication. He is proficient in project management software, CAD, and engineering design tools.
Naveed Asif C.V Updated
The document provides a summary of Naveed Asif's experience and qualifications. It summarizes that he has over 12 years of experience as a chief surveyor working on infrastructure projects in the UAE. It also lists his academic qualifications which include a diploma in land surveying. It then provides details of his professional experience working as a chief surveyor on major road and infrastructure projects in Abu Dhabi worth billions of dollars.
Devore vvcc feb 13 2013 final
This document provides information about a project to improve the Devore Interchange on I-15 in San Bernardino County, California. The project aims to address current and future traffic congestion issues by adding lanes, improving local interchanges, and separating truck and automobile traffic. It will be delivered using a design-build approach and is expected to be completed by 2016 after right of way acquisitions and design work are finished by 2014. Public outreach efforts will provide ongoing information to local communities during the project.
Similar to Jacob Strauch, P.E. - Resume (20)
train civil engineering courses for professionals and dimmies the trainingvguide
train civil engineering courses for professionals and dimmies the trainingvguide
Recently uploaded
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
The need for ecofriendly materials as building materials in this century cannot be overemphasized
Sri Guru Hargobind Ji - Bandi Chor Guru.pdf
Sri Guru Hargobind Ji (19 June 1595 - 3 March 1644) is revered as the Sixth Nanak.
• On 25 May 1606 Guru Arjan nominated his son Sri Hargobind Ji as his successor. Shortly
afterwards, Guru Arjan was arrested, tortured and killed by order of the Mogul Emperor
Jahangir.
• Guru Hargobind's succession ceremony took place on 24 June 1606. He was barely
eleven years old when he became 6th Guru.
• As ordered by Guru Arjan Dev Ji, he put on two swords, one indicated his spiritual
authority (PIRI) and the other, his temporal authority (MIRI). He thus for the first time
initiated military tradition in the Sikh faith to resist religious persecution, protect
people’s freedom and independence to practice religion by choice. He transformed
Sikhs to be Saints and Soldier.
• He had a long tenure as Guru, lasting 37 years, 9 months and 3 days
Object Oriented Analysis and Design - OOAD
This ppt gives detailed description of Object Oriented Analysis and design.
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
FULL STACK PROGRAMMING - Both Front End and Back End
This ppt gives details about Full Stack Programming and its basics.
AI in customer support Use cases solutions development and implementation.pdf
AI in customer support will integrate with emerging technologies such as augmented reality (AR) and virtual reality (VR) to enhance service delivery. AR-enabled smart glasses or VR environments will provide immersive support experiences, allowing customers to visualize solutions, receive step-by-step guidance, and interact with virtual support agents in real-time. These technologies will bridge the gap between physical and digital experiences, offering innovative ways to resolve issues, demonstrate products, and deliver personalized training and support.
https://www.leewayhertz.com/ai-in-customer-support/#How-does-AI-work-in-customer-support
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...Paris Salesforce Developer Group
Build the Next Generation of Apps with the Einstein 1 Platform.
Rejoignez Philippe Ozil pour une session de workshops qui vous guidera à travers les détails de la plateforme Einstein 1, l'importance des données pour la création d'applications d'intelligence artificielle et les différents outils et technologies que Salesforce propose pour vous apporter tous les bénéfices de l'IA.Beckhoff Programmable Logic Control Overview Presentation
This presentation is to describe the overview of PLC Beckhoff for beginners
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
Join us for this solutions-based webinar on the tools and techniques for commissioning and maintaining PV Systems. In this session, we'll review the process of building and maintaining a solar array, starting with installation and commissioning, then reviewing operations and maintenance of the system. This course will review insulation resistance testing, I-V curve testing, earth-bond continuity, ground resistance testing, performance tests, visual inspections, ground and arc fault testing procedures, and power quality analysis.
Fluke Solar Application Specialist Will White is presenting on this engaging topic:
Will has worked in the renewable energy industry since 2005, first as an installer for a small east coast solar integrator before adding sales, design, and project management to his skillset. In 2022, Will joined Fluke as a solar application specialist, where he supports their renewable energy testing equipment like IV-curve tracers, electrical meters, and thermal imaging cameras. Experienced in wind power, solar thermal, energy storage, and all scales of PV, Will has primarily focused on residential and small commercial systems. He is passionate about implementing high-quality, code-compliant installation techniques.
Blood finder application project report (1).pdf
Blood Finder is an emergency time app where a user can search for the blood banks as
well as the registered blood donors around Mumbai. This application also provide an
opportunity for the user of this application to become a registered donor for this user have
to enroll for the donor request from the application itself. If the admin wish to make user
a registered donor, with some of the formalities with the organization it can be done.
Specialization of this application is that the user will not have to register on sign-in for
searching the blood banks and blood donors it can be just done by installing the
application to the mobile.
The purpose of making this application is to save the user’s time for searching blood of
needed blood group during the time of the emergency.
This is an android application developed in Java and XML with the connectivity of
SQLite database. This application will provide most of basic functionality required for an
emergency time application. All the details of Blood banks and Blood donors are stored
in the database i.e. SQLite.
This application allowed the user to get all the information regarding blood banks and
blood donors such as Name, Number, Address, Blood Group, rather than searching it on
the different websites and wasting the precious time. This application is effective and
user friendly.
Digital Twins Computer Networking Paper Presentation.pptx
A Digital Twin in computer networking is a virtual representation of a physical network, used to simulate, analyze, and optimize network performance and reliability. It leverages real-time data to enhance network management, predict issues, and improve decision-making processes.
Assistant Engineer (Chemical) Interview Questions.pdf
These are interview questions for the post of Assistant Engineer (Chemical)
Open Channel Flow: fluid flow with a free surface
Open Channel Flow: This topic focuses on fluid flow with a free surface, such as in rivers, canals, and drainage ditches. Key concepts include the classification of flow types (steady vs. unsteady, uniform vs. non-uniform), hydraulic radius, flow resistance, Manning's equation, critical flow conditions, and energy and momentum principles. It also covers flow measurement techniques, gradually varied flow analysis, and the design of open channels. Understanding these principles is vital for effective water resource management and engineering applications.
Recently uploaded (20)
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
FULL STACK PROGRAMMING - Both Front End and Back End
FULL STACK PROGRAMMING - Both Front End and Back End
AI in customer support Use cases solutions development and implementation.pdf
AI in customer support Use cases solutions development and implementation.pdf
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
EV BMS WITH CHARGE MONITOR AND FIRE DETECTION.pptx
EV BMS WITH CHARGE MONITOR AND FIRE DETECTION.pptx
Beckhoff Programmable Logic Control Overview Presentation
Beckhoff Programmable Logic Control Overview Presentation
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
Digital Twins Computer Networking Paper Presentation.pptx
Digital Twins Computer Networking Paper Presentation.pptx
openshift technical overview - Flow of openshift containerisatoin
openshift technical overview - Flow of openshift containerisatoin
Assistant Engineer (Chemical) Interview Questions.pdf
Assistant Engineer (Chemical) Interview Questions.pdf
Jacob Strauch, P.E. - Resume
- 1. Jacob Strauch, P.E. jacobzstrauch@outlook.com | 703.472.5024 | www.linkedin.com/in/jacob-strauch SKILLS / EXPERTISE: • Technical: Drafting, Hydraulic Design, Roadway Design, Temporary Traffic Control Design, Right-of-Way Acquisition, Quality Control, 3D Modeling, Cost Estimating, Bid Documents • Software: Microstation, GEOPAK, Flowmaster, Culvertmaster, Openroads, Bluebeam Revu, Projectwise, Microsoft Office. Basic proficiency in AutoCad Civil 3D and ArcGIS DEWBERRY – Richmond, VA Staff Engineer February 2018 – Present • Develop closed storm sewer systems and open channel drainage for 8+ miles of roadway to meet standards and mitigate environmental impacts • Produce 3D models of 5+ miles of roadway corridors to quantify earthwork, evaluate impacts and explore alternative technical designs • Create vertical alignments for roadways and entrances and assist in the horizontal design of roadways • Review 15+ submittals from subconsultants, finding over 20 costly fabrication errors • Assign tasks to graduate engineers and work with a multi-disciplinary team on complex projects • Design temporary traffic control layouts for utility work in urban areas to keep drivers safe and alleviate congestion • Create itemized cost estimates, tracking $10+ million of quantity takeoffs for design-bid-build projects • Provide bi-weekly progress reports to localities on work performed and to provide schedule updates Selected Project Experience • Route 10 Widening (Chesterfield County, VA) • Sole drainage designer responsible for laying out and designing 100+ inlets and 1.5 miles of storm sewer including analyzing connections with existing networks • Developed the contract with the county for the $14 million project which is awaiting advertisement • I-64 Segment III Design-Build (Williamsburg, VA) • Evaluated and addressed 200+ roadway and drainage comments from VDOT • Responded to 10+ RFI’s from the contractor throughout the construction process and generated design alternatives to ensure $180 million project stayed on schedule DEWBERRY – Fairfax, VA Graduate Engineer June 2014 – February 2018 • Coordinated with utility owners to evaluate potential conflicts with proposed elements in highly developed areas, designed gravity sewer and water lines when relocation was unavoidable • Worked with surveyors to lay out easements and quantify impacts to property owners • Drafted roadway plan sheets, summary sheets and prepared plan set submissions for 5+ VDOT projects and 20+ revisions • Created exhibits for hearings to inform public on proposed projects Selected Project Experience • Route 7 Corridor Improvements (Fairfax, VA) • Developed 4 miles of conceptual drainage design during pursuit phase to help secure $252 million design- build project • Delineated easements for utilities and impacts on nearly 200 affected parcels and created accurate right of way plans so properties could be assessed. EDUCATION Virginia Polytechnic Institute and State University September 2010 – May 2014 BS in Civil Engineering Graduated Magna Cum Laude CERTIFICATIONS • Professional Engineer License, Virginia • VDOT Advanced Workzone Traffic Control Certification