INTEKE Color Viewing Booth / Color Viewer CAC(12)
•
0 likes•37 views
INTEKE Color Viewing Booth / Color Viewer CAC(12) offers three different standardised viewing environment for visual color evaluation in printing area.
Report
Share
Report
Share
Download to read offline
Recommended
ZluxEL-Catalog
This document provides information about Zlux, a manufacturer of electroluminescent lighting that uses a printing process to apply thin, flexible electroluminescent panels. It discusses electroluminescence technology, how Zlux's spot illumination process works, various custom lumagraphic applications, and pricing for standard lumagraphic options. The document is intended to explain Zlux's products and services to potential customers.
INTEKE Color Assessment Cabinet CAC(7) with D65,TL84,UV,F,CWF,U30,INCA seven ...
INTEKE Color Assessment Cabinet CAC(7) with D65,TL84,UV,F,CWF,U30,INCA seven ...INTEKE INSTRUMENT CO.,LIMITED
INTEKE Color Assessment Cabinet CAC(7) with D65,TL84,UV,F,CWF,U30,INCA provide seven light source to obtain an objective assessment of color and color difference, at anytime, anywhere. Good Practices in the Use of ICT Equipment for Electricity Savings at a Unive...
This presentation has been presented at the 5th International Green Computing Conference (IGCC), Dallas, Texas USA, November 2014. Abstract of the corresponding research paper follows:
The commercial sector is responsible in a large degree for the overall energy consumption around the world and Information and Communication Technologies (ICT) constitute an important category of electricity loads which is becoming dominant in offices. Recognizing the importance of using ICT equipment more rationally for saving energy in commercial buildings, we have performed an energy audit of ICT loads at the School of Design and Environment, National University of Singapore, using smart power outlets. After a six-month period through which we have measured and analyzed the consumption of the most representative ICT devices available at the school, we have identified various good practices in the use of office equipment, in order to reduce the total electricity footprint of the building. Most of our practices can be generalized for offices and commercial buildings.
Cite the paper as follows: ndreas Kamilaris, Dang Truong Hoang Ngan, Alexandros Pantazaras, Balaji Kalluri, Sekhar Kondepudi and Tham Kwok Wai. Good Practices in the Use of ICT Equipment for Electricity Savings at a University Campus. In Proc. of the 5th International Green Computing Conference (IGCC), Dallas, Texas USA, November 2014.
Print screen
The document describes PrintScreen, a method for non-experts to design and print highly customized thin-film touch displays using electroluminescence. Key contributions include:
1) A screen printing or inkjet printing process to create 120um thick, bendable displays on various substrates like paper or plastic in custom shapes and colors.
2) A design approach based on 2D graphics to integrate printed display elements with static artwork.
3) A sensing framework using the printed display for touch input.
Example applications demonstrate uses in ubiquitous, mobile, and wearable computing. Evaluation shows the bright, flexible displays are robust to bending.
Konica Minolta CR-10 Plus Color Reader
INTEKE Instrument offers Konica Minolta CR-10 Plus Color Reader all over the world. Konica Minolta s CR-10 Plus (successor to the CR-10) color difference reader is a portable, battery powered, and hand-held instrument for quick, precise color control. The CR-10 Plus tristimulus colorimeter is easily operable, economical and portable like never before.
SLE News June 2015
SLE has propitiously completed a Project for setting up of Laboratory for Cement Plant in Central India. An entire array of services was provided with world class quality.
www.spectrolabequipments.com
E-ink
All about Electrophoretic Ink technology, from its structures and architecture to its advantages and disadvantages
IRJET- Smart Hand Gloves for Disable People
1) The document describes a smart glove prototype designed to help disabled people communicate through hand gestures.
2) The glove uses flex sensors on the fingers to detect hand gestures and an Arduino microcontroller to convert the gestures to text or pre-recorded voices.
3) The glove has three modes - displaying gesture status, converting gestures to voices, and controlling home appliances wirelessly through hand gestures.
Recommended
ZluxEL-Catalog
This document provides information about Zlux, a manufacturer of electroluminescent lighting that uses a printing process to apply thin, flexible electroluminescent panels. It discusses electroluminescence technology, how Zlux's spot illumination process works, various custom lumagraphic applications, and pricing for standard lumagraphic options. The document is intended to explain Zlux's products and services to potential customers.
INTEKE Color Assessment Cabinet CAC(7) with D65,TL84,UV,F,CWF,U30,INCA seven ...
INTEKE Color Assessment Cabinet CAC(7) with D65,TL84,UV,F,CWF,U30,INCA seven ...INTEKE INSTRUMENT CO.,LIMITED
INTEKE Color Assessment Cabinet CAC(7) with D65,TL84,UV,F,CWF,U30,INCA provide seven light source to obtain an objective assessment of color and color difference, at anytime, anywhere. Good Practices in the Use of ICT Equipment for Electricity Savings at a Unive...
This presentation has been presented at the 5th International Green Computing Conference (IGCC), Dallas, Texas USA, November 2014. Abstract of the corresponding research paper follows:
The commercial sector is responsible in a large degree for the overall energy consumption around the world and Information and Communication Technologies (ICT) constitute an important category of electricity loads which is becoming dominant in offices. Recognizing the importance of using ICT equipment more rationally for saving energy in commercial buildings, we have performed an energy audit of ICT loads at the School of Design and Environment, National University of Singapore, using smart power outlets. After a six-month period through which we have measured and analyzed the consumption of the most representative ICT devices available at the school, we have identified various good practices in the use of office equipment, in order to reduce the total electricity footprint of the building. Most of our practices can be generalized for offices and commercial buildings.
Cite the paper as follows: ndreas Kamilaris, Dang Truong Hoang Ngan, Alexandros Pantazaras, Balaji Kalluri, Sekhar Kondepudi and Tham Kwok Wai. Good Practices in the Use of ICT Equipment for Electricity Savings at a University Campus. In Proc. of the 5th International Green Computing Conference (IGCC), Dallas, Texas USA, November 2014.
Print screen
The document describes PrintScreen, a method for non-experts to design and print highly customized thin-film touch displays using electroluminescence. Key contributions include:
1) A screen printing or inkjet printing process to create 120um thick, bendable displays on various substrates like paper or plastic in custom shapes and colors.
2) A design approach based on 2D graphics to integrate printed display elements with static artwork.
3) A sensing framework using the printed display for touch input.
Example applications demonstrate uses in ubiquitous, mobile, and wearable computing. Evaluation shows the bright, flexible displays are robust to bending.
Konica Minolta CR-10 Plus Color Reader
INTEKE Instrument offers Konica Minolta CR-10 Plus Color Reader all over the world. Konica Minolta s CR-10 Plus (successor to the CR-10) color difference reader is a portable, battery powered, and hand-held instrument for quick, precise color control. The CR-10 Plus tristimulus colorimeter is easily operable, economical and portable like never before.
SLE News June 2015
SLE has propitiously completed a Project for setting up of Laboratory for Cement Plant in Central India. An entire array of services was provided with world class quality.
www.spectrolabequipments.com
E-ink
All about Electrophoretic Ink technology, from its structures and architecture to its advantages and disadvantages
IRJET- Smart Hand Gloves for Disable People
1) The document describes a smart glove prototype designed to help disabled people communicate through hand gestures.
2) The glove uses flex sensors on the fingers to detect hand gestures and an Arduino microcontroller to convert the gestures to text or pre-recorded voices.
3) The glove has three modes - displaying gesture status, converting gestures to voices, and controlling home appliances wirelessly through hand gestures.
CloudIndustries.eu - industrial monitoring for hardware, renewables power pla...
Aedilis, UAB is an energy infrastructure company established in 2004 in Lithuania. It provides engineering services for high voltage substations and renewable power plants from 0.4kV to 400kV. The company has 65 employees and its R&D group, ELSETA, developed CloudIndustries.eu, an IoT platform for monitoring renewable energy plants and other industrial facilities. CloudIndustries.eu provides customizable dashboards and reports to visualize data from sensors in real-time. It also offers ODM services to develop customized monitoring solutions for other companies' hardware products.
IOT Vehicle Fuel Theft Detection System Using Arduino.pptx
This document describes an IOT vehicle fuel theft detection system using Arduino that detects fuel theft and sends an alert. It uses a level sensor to detect the fuel level, and if it drops below a threshold, a buzzer is activated. The system is deactivated while the ignition is on to prevent false alarms while driving. If fuel theft is detected, data is sent over the internet to a website. The system aims to help vehicle owners detect fuel theft in their vehicles and prevent the problem.
Third Eye For Blind.pptx
The document describes a project called "Third Eye For Blind" which uses ultrasonic sensors and a NodeMCU microcontroller to help blind people navigate. The system detects nearby obstacles using ultrasonic waves and notifies the user via vibrations from a motor and beeps from a buzzer. It requires components like ultrasonic sensors, LEDs, resistors, jumper cables, a breadboard, buzzers, vibrating motors, and an LCD display. The system is intended to provide a low-cost and efficient way to help the visually impaired navigate more confidently and independently.
computer application and digi world
1. The document discusses various computer input and output devices. It provides descriptions and examples of basic input devices like the mouse and keyboard, as well as complex input devices like joysticks and scanners.
2. It also discusses basic output devices like computer monitors and speakers, as well as application-specific devices like printers and projectors. Examples are given for different types of each device.
3. The document serves to describe and provide examples of the main types of computer input and output devices.
The Torque and Angulation Lab with IN-Tendo
Who we are and what we do with regards to our laboratory services for Lingual Orthodontics. From simple 2D bonding, to 3D B.E.S.T. system using standard charts for Tip and Torque, or go for the fully customized IN-Tendo techniques which needs us to make diagnostic study models, then using the TTS and BPI to bond the brackets to the mal-occlusion models.
Be astonished wow! interactive printing like magic tricks 2
TRICK PRINT®, a printing technology that reacts interactively to user actions, can be produced with your inkjet printer. In this presentation, we will introduce the basic technology of Trick Print and how to implement it.
Future Decoded 2014 Show Guide
Cloudamour are extremely proud to be the Gold sponsors for Microsoft's premier UK technology event at the London ExCel arena on Monday 10th - Wednesday 12th November.
If you would like tickets to join us at this prestigious event please let us know by emailing hello@cloudamour.com. If you are already going then come and join us on Stand Y8 and enter a chance to win an amazing Xbox One!
For more information about this event please visit http://www.microsoft.com/en-gb/about/future-decoded-2014
Printer, Network - Wk18 2014
The document discusses issues with a Fuji Xerox DocuPrint CM305 printer and proposed solutions. It summarizes that replacing the printer's drum resolved color inconsistency issues. It also notes that printing directly from Adobe software provides the best color match compared to other formats. The document alerts about a planned wireless router change and says connectivity will be monitored closely to ensure no disruptions.
Bpr Media Broadcast
This document provides an overview of the news gathering process from initial research through script writing and rundown production. Key aspects covered include accessing various sources of information, planning stories, creating scripts with formatting and timing tools, building flexible rundowns, and making last minute changes. Emphasis is placed on collaboration tools that allow easy sharing of content and coordination across teams.
projector_specification for light projection.
Assignment to select a Projector for the outdoor wall light projection.
Desktop Spectrophotometer
DSCD-900 adopts the geometric of D/8, built-in full wavelength of LED, double beam optical system, ETC every-time calibration technology, spectral reflectance standard deviation within 0.08, max ΔE*ab is 0.03
NeXTWORLD Magazine 1991 (Complete)
This document provides an advertisement for OCR Servant, an optical character recognition (OCR) software for the NeXT workstation. It highlights that OCR Servant can recognize almost any font or type style at speeds of up to 200 characters per second, and converts scanned documents to ASCII text that can be used in any word processor. The ad encourages readers to contact HSD Microcomputer U.S., Inc. to learn more about OCR Servant and their family of color and grayscale scanners that are compatible with the NeXT workstation.
Dukane 8120 wi projector
I am an authorized consultant for Dukane
Bill McIntosh
Phone : 843-442-8888
Email : WKMcIntosh@Comcast.net
Dukane website : www.dukanav.com
Moving to Manufacture_Internet of Things (Part 02)
Reference: Designing the Internet of Things
Book by Adrian McEwen and Hakim Cassimally
Presented by: Blety Alengadan (Asst.Professor)
Chapter 10 (Part 02)
SMART GLOVES FOR.pptx
The document describes a smart glove system for deaf and mute people that uses flex sensors and an Arduino board to translate sign language gestures into text or speech. The system captures gestures using flex sensors on a glove connected to an Arduino board. The Arduino board transforms the gestures into text or speech using a text-to-speech converter. An Android app is also proposed to receive the translated messages and output them as voice, allowing deaf people to communicate with others. The system aims to provide an easy and portable way for speech and hearing impaired individuals to communicate.
IntheLimelight_web
This document discusses colour management and digital workflows. It introduces icorp's Managed Creative Technology (MCT) solution which aims to implement best practice digital workflows for creative companies. MCT includes consulting, implementing solutions, training, and ongoing support to ensure technology runs optimally and users can focus on design rather than troubleshooting technical issues. The document also discusses standardizing lighting conditions for proofing and presswork to improve colour matching, citing Claude Monet's work as an example of how lighting affects colour perception.
General Presentation
Hyper Sonic is an Egyptian company that provides audiovisual, lighting, and staging solutions for live events and permanent installations. They select the right equipment for clients' needs and budgets and ensure project success. Services include event production, equipment rental, technical support, maintenance, and installation of systems. The document then provides details on digital signage, video walls, touch screens, interactive whiteboards, LED and plasma displays, projectors, holograms, sound systems, video conferencing, lighting fixtures, video cameras, and photography services.
Petos Brochure
Get to know more about our wide ranges of products and services which is targeted at solving your day to day problems. We we designed this products base on cutomers need and what we have come to see lacking over the years in Africa.
Bidirectional Visitor counter Project Proposal
The document proposes a bidirectional visitor counter project that will count the number of people entering and exiting a room and display the number on an LCD screen. It will also automatically control the room lights, turning them off when the room is empty. The project aims to address issues like people being locked in rooms unintentionally or not knowing how many attendees there were for an event. It will use infrared sensors to detect movement and an AT89C51 microcontroller along with other basic electronic components like resistors, capacitors, and displays. The total cost is estimated to be Rs 2800 and the project is planned to be completed by July 4th for presentation.
Tecnica CASA Investors
Tecnica Inc. has developed a new Galvanometer-Free Optics system for SLS 3D printing that can achieve print speeds over 1,000 m/sec, over 166 times faster than traditional systems, by eliminating sources of distortion and delivering laser energy more uniformly across the print plane. Their patented technology provides higher quality prints at unprecedented speeds compared to the outdated industry standard of using galvanometers and F-theta lenses. Tecnica is seeking partners to help bring their technology to production and maximize its potential to transform SLS 3D printing.
Cold Call Campaigns: Strategies for Success
"Cold Call Campaigns Success visually represent data and information related to the effectiveness of cold calling in sales and marketing strategies. These graphics use a combination of charts, graphs, and illustrations to convey key insights and statistics in a concise and engaging manner.
The infographics may include data on conversion rates, lead generation, call-to-sale ratios, and other metrics to showcase the impact of cold calling on business growth. They can also highlight best practices, tips, and strategies for optimizing cold call campaigns to improve success rates.
By presenting complex information in a visually appealing format, these infographics make it easier for viewers to understand and digest the content quickly. This makes them an effective tool for businesses looking to communicate the benefits of cold calling and its role in driving sales success.
Overall, infographics on Cold Call Campaigns Success serve as a valuable resource for sales professionals, marketers, and business owners seeking to enhance their cold calling strategies and achieve greater success in their campaigns.
COMPANY PROFILE S.V.AIRTECH PVT. 2024.pdf
Comfort & Clean Air Solution Authorized Corporate Sale & Service Dealer.
HVAC is an acronym for Heating, Ventilation, and Air Conditioning. The term HVAC is used to describe a complete home comfort system that can be used to heat and cool your home, as well as provide improved indoor air quality.
More Related Content
Similar to INTEKE Color Viewing Booth / Color Viewer CAC(12)
CloudIndustries.eu - industrial monitoring for hardware, renewables power pla...
Aedilis, UAB is an energy infrastructure company established in 2004 in Lithuania. It provides engineering services for high voltage substations and renewable power plants from 0.4kV to 400kV. The company has 65 employees and its R&D group, ELSETA, developed CloudIndustries.eu, an IoT platform for monitoring renewable energy plants and other industrial facilities. CloudIndustries.eu provides customizable dashboards and reports to visualize data from sensors in real-time. It also offers ODM services to develop customized monitoring solutions for other companies' hardware products.
IOT Vehicle Fuel Theft Detection System Using Arduino.pptx
This document describes an IOT vehicle fuel theft detection system using Arduino that detects fuel theft and sends an alert. It uses a level sensor to detect the fuel level, and if it drops below a threshold, a buzzer is activated. The system is deactivated while the ignition is on to prevent false alarms while driving. If fuel theft is detected, data is sent over the internet to a website. The system aims to help vehicle owners detect fuel theft in their vehicles and prevent the problem.
Third Eye For Blind.pptx
The document describes a project called "Third Eye For Blind" which uses ultrasonic sensors and a NodeMCU microcontroller to help blind people navigate. The system detects nearby obstacles using ultrasonic waves and notifies the user via vibrations from a motor and beeps from a buzzer. It requires components like ultrasonic sensors, LEDs, resistors, jumper cables, a breadboard, buzzers, vibrating motors, and an LCD display. The system is intended to provide a low-cost and efficient way to help the visually impaired navigate more confidently and independently.
computer application and digi world
1. The document discusses various computer input and output devices. It provides descriptions and examples of basic input devices like the mouse and keyboard, as well as complex input devices like joysticks and scanners.
2. It also discusses basic output devices like computer monitors and speakers, as well as application-specific devices like printers and projectors. Examples are given for different types of each device.
3. The document serves to describe and provide examples of the main types of computer input and output devices.
The Torque and Angulation Lab with IN-Tendo
Who we are and what we do with regards to our laboratory services for Lingual Orthodontics. From simple 2D bonding, to 3D B.E.S.T. system using standard charts for Tip and Torque, or go for the fully customized IN-Tendo techniques which needs us to make diagnostic study models, then using the TTS and BPI to bond the brackets to the mal-occlusion models.
Be astonished wow! interactive printing like magic tricks 2
TRICK PRINT®, a printing technology that reacts interactively to user actions, can be produced with your inkjet printer. In this presentation, we will introduce the basic technology of Trick Print and how to implement it.
Future Decoded 2014 Show Guide
Cloudamour are extremely proud to be the Gold sponsors for Microsoft's premier UK technology event at the London ExCel arena on Monday 10th - Wednesday 12th November.
If you would like tickets to join us at this prestigious event please let us know by emailing hello@cloudamour.com. If you are already going then come and join us on Stand Y8 and enter a chance to win an amazing Xbox One!
For more information about this event please visit http://www.microsoft.com/en-gb/about/future-decoded-2014
Printer, Network - Wk18 2014
The document discusses issues with a Fuji Xerox DocuPrint CM305 printer and proposed solutions. It summarizes that replacing the printer's drum resolved color inconsistency issues. It also notes that printing directly from Adobe software provides the best color match compared to other formats. The document alerts about a planned wireless router change and says connectivity will be monitored closely to ensure no disruptions.
Bpr Media Broadcast
This document provides an overview of the news gathering process from initial research through script writing and rundown production. Key aspects covered include accessing various sources of information, planning stories, creating scripts with formatting and timing tools, building flexible rundowns, and making last minute changes. Emphasis is placed on collaboration tools that allow easy sharing of content and coordination across teams.
projector_specification for light projection.
Assignment to select a Projector for the outdoor wall light projection.
Desktop Spectrophotometer
DSCD-900 adopts the geometric of D/8, built-in full wavelength of LED, double beam optical system, ETC every-time calibration technology, spectral reflectance standard deviation within 0.08, max ΔE*ab is 0.03
NeXTWORLD Magazine 1991 (Complete)
This document provides an advertisement for OCR Servant, an optical character recognition (OCR) software for the NeXT workstation. It highlights that OCR Servant can recognize almost any font or type style at speeds of up to 200 characters per second, and converts scanned documents to ASCII text that can be used in any word processor. The ad encourages readers to contact HSD Microcomputer U.S., Inc. to learn more about OCR Servant and their family of color and grayscale scanners that are compatible with the NeXT workstation.
Dukane 8120 wi projector
I am an authorized consultant for Dukane
Bill McIntosh
Phone : 843-442-8888
Email : WKMcIntosh@Comcast.net
Dukane website : www.dukanav.com
Moving to Manufacture_Internet of Things (Part 02)
Reference: Designing the Internet of Things
Book by Adrian McEwen and Hakim Cassimally
Presented by: Blety Alengadan (Asst.Professor)
Chapter 10 (Part 02)
SMART GLOVES FOR.pptx
The document describes a smart glove system for deaf and mute people that uses flex sensors and an Arduino board to translate sign language gestures into text or speech. The system captures gestures using flex sensors on a glove connected to an Arduino board. The Arduino board transforms the gestures into text or speech using a text-to-speech converter. An Android app is also proposed to receive the translated messages and output them as voice, allowing deaf people to communicate with others. The system aims to provide an easy and portable way for speech and hearing impaired individuals to communicate.
IntheLimelight_web
This document discusses colour management and digital workflows. It introduces icorp's Managed Creative Technology (MCT) solution which aims to implement best practice digital workflows for creative companies. MCT includes consulting, implementing solutions, training, and ongoing support to ensure technology runs optimally and users can focus on design rather than troubleshooting technical issues. The document also discusses standardizing lighting conditions for proofing and presswork to improve colour matching, citing Claude Monet's work as an example of how lighting affects colour perception.
General Presentation
Hyper Sonic is an Egyptian company that provides audiovisual, lighting, and staging solutions for live events and permanent installations. They select the right equipment for clients' needs and budgets and ensure project success. Services include event production, equipment rental, technical support, maintenance, and installation of systems. The document then provides details on digital signage, video walls, touch screens, interactive whiteboards, LED and plasma displays, projectors, holograms, sound systems, video conferencing, lighting fixtures, video cameras, and photography services.
Petos Brochure
Get to know more about our wide ranges of products and services which is targeted at solving your day to day problems. We we designed this products base on cutomers need and what we have come to see lacking over the years in Africa.
Bidirectional Visitor counter Project Proposal
The document proposes a bidirectional visitor counter project that will count the number of people entering and exiting a room and display the number on an LCD screen. It will also automatically control the room lights, turning them off when the room is empty. The project aims to address issues like people being locked in rooms unintentionally or not knowing how many attendees there were for an event. It will use infrared sensors to detect movement and an AT89C51 microcontroller along with other basic electronic components like resistors, capacitors, and displays. The total cost is estimated to be Rs 2800 and the project is planned to be completed by July 4th for presentation.
Tecnica CASA Investors
Tecnica Inc. has developed a new Galvanometer-Free Optics system for SLS 3D printing that can achieve print speeds over 1,000 m/sec, over 166 times faster than traditional systems, by eliminating sources of distortion and delivering laser energy more uniformly across the print plane. Their patented technology provides higher quality prints at unprecedented speeds compared to the outdated industry standard of using galvanometers and F-theta lenses. Tecnica is seeking partners to help bring their technology to production and maximize its potential to transform SLS 3D printing.
Similar to INTEKE Color Viewing Booth / Color Viewer CAC(12) (20)
CloudIndustries.eu - industrial monitoring for hardware, renewables power pla...
CloudIndustries.eu - industrial monitoring for hardware, renewables power pla...
IOT Vehicle Fuel Theft Detection System Using Arduino.pptx
IOT Vehicle Fuel Theft Detection System Using Arduino.pptx
Be astonished wow! interactive printing like magic tricks 2
Be astonished wow! interactive printing like magic tricks 2
Moving to Manufacture_Internet of Things (Part 02)
Moving to Manufacture_Internet of Things (Part 02)
Recently uploaded
Cold Call Campaigns: Strategies for Success
"Cold Call Campaigns Success visually represent data and information related to the effectiveness of cold calling in sales and marketing strategies. These graphics use a combination of charts, graphs, and illustrations to convey key insights and statistics in a concise and engaging manner.
The infographics may include data on conversion rates, lead generation, call-to-sale ratios, and other metrics to showcase the impact of cold calling on business growth. They can also highlight best practices, tips, and strategies for optimizing cold call campaigns to improve success rates.
By presenting complex information in a visually appealing format, these infographics make it easier for viewers to understand and digest the content quickly. This makes them an effective tool for businesses looking to communicate the benefits of cold calling and its role in driving sales success.
Overall, infographics on Cold Call Campaigns Success serve as a valuable resource for sales professionals, marketers, and business owners seeking to enhance their cold calling strategies and achieve greater success in their campaigns.
COMPANY PROFILE S.V.AIRTECH PVT. 2024.pdf
Comfort & Clean Air Solution Authorized Corporate Sale & Service Dealer.
HVAC is an acronym for Heating, Ventilation, and Air Conditioning. The term HVAC is used to describe a complete home comfort system that can be used to heat and cool your home, as well as provide improved indoor air quality.
ChartMogul Sales Deck Example - SaaS payment analytics
Chart Mogul Sales Deck for example purposes only.
2024 Slides: Sales Productivity: A Deep Dive into Daily Success
Slides from the Demandbase customer lab on Sales Productivity
8328958814SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA ...
8328958814SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN
Recently uploaded (8)
ChartMogul Sales Deck Example - SaaS payment analytics
ChartMogul Sales Deck Example - SaaS payment analytics
2024 Slides: Sales Productivity: A Deep Dive into Daily Success
2024 Slides: Sales Productivity: A Deep Dive into Daily Success
8328958814SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA ...
8328958814SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA ...
INTEKE Color Viewing Booth / Color Viewer CAC(12)
- 1. Tel：(0755) 86354829 86354826 Fax：(0755)29182559 Mobile：13723487970 Website：http:// www.inteke.com E-mail：inteke@gmail.com / inteke@vip.163.com INTEKE INSTRUMENT CO., LIMITED E-mail:inteke@gmail.com INTEKE COLOR VIEWING BOOTH Model: CAC(12) Common Light source: D65, D50, U30 Replacement light source: TL84, UV, CWF Inteke Color Viewer is widely applies to printing industry, furnishings and color matching of the printing ink industry etc., it is a necessity for those industry to control the colors and qualities of products. This Color Viewer supplies D65, D50, U30 light sources. This machine was controlled by microcomputer, which allows the rapid conversion between each light source. The Color Viewer also had the function of display the running time of each light source. Light source In different condition, the object may presents different spectrum with same color, our vision result of the colors will be differently, thereby it will affects us to judge the color accurately by our naked eyes. While according to our customer’s demand, the Color Viewer ,which is the international standard, can provide the right light source you need when you check the colors, such as D65,D50,TL84,UV,U30,CWF etc.. The life-span of lamp is depends on the accumulated running time and the turn on times. When the lamp become aging, light instablebility or the two sides turn black, please replace the lamp timely, otherwise, the checking result would be effected. Technique Parameter Light source: imported fluorescent lamp 36W D65 *4 36W D50 *4 36W U30 *4
- 2. Tel：(0755) 86354829 86354826 Fax：(0755)29182559 Mobile：13723487970 Website：http:// www.inteke.com E-mail：inteke@gmail.com / inteke@vip.163.com INTEKE INSTRUMENT CO., LIMITED E-mail:inteke@gmail.com Worktable Dimension (mm) : 1320 * 780 (length * width) Outer Dimension(mm): 1320 * 800 * 1700 (length * width * high)