Ti-SCADA is a condition monitoring and asset management software developed by Techimp to help utilities optimize maintenance of transformers. It integrates data from sensors monitoring various parameters like partial discharges, dissolved gases, and tan delta to provide a comprehensive view of asset health. The software's real-time monitoring and customizable reports allow users to make informed maintenance decisions to avoid unexpected failures. Its open architecture and programmable logic enable domain experts to develop applications tailored for their specific asset management needs.

1. Ti-SCADA
Transformer Monitoring & Diagnostic Solutions

2. Ti-SCADA
Transformer Monitoring & Diagnostic Solutions
Condition assessment of transformers is likely the most challenging task in asset
management of transmission/distribution networks. This is due on one side to
machine construction and complexity that makes, for instance, internal visual
inspection very expensive and time consuming. On the other side, transformers
are expensive and critical equipments, due to the long times needed to replace
or restore them in service after a failure. Moreover, catastrophic failures of
transformers often involve fires and explosions, posing at risk operator safety,
damaging other pieces of equipment and polluting the environment.
Usually electrical installations undergo a Time Based Maintenance (TBM)
program at fixed time intervals. However, for the most critical equipments a
Condition Based Maintenance (CBM) is much more advisable. Applying CBM
means to keep the electrical equipment condition under control, through
detection of potential sources of ageing and failure at a early stage. Thus allows
countermeasures before irreversible and harmful events happen to be taken. By
means of CBM, failure rate is kept constant at a level chosen by the asset
manager. Therefore, unexpected breakdowns causing long forced stops can be
avoided, thus limiting costs due to loss of revenues and repair after failure.
After years of advanced researches, laboratory and on-field tests, Techimp has
developed powerful and effective tools which can help asset managers to take
critical decisions and manage power transformers in a cost-saving way.
“Many transformers are nearing the end of
their lifecycle. We specialise in preventive
assessment that extends their lives.
A better diagnostic coverage!
reduction of overall maintenance costs
better diagnostic coverage and
increased reliability, exploiting
synergies among information provided
by different diagnostic, are the strength
of the Techimp approach.
Ti-SCADA_TransformerMonitoring&DiagnosticSolutions_DRAFT20130703

3. Techimp offers complete systems for online condition assessment of
transformers, from sensors and subsystems to general purpose platforms
and Techimp customer support center.
Transformer Ti-SCADA is a fundamental component
of the new generation of online condition monitoring
systems.
Ti-SCADA is designed on a Service Oriented
Architecture (SOA) based on an interoperability
standard for industrial automation -*OPC UA -
allowing high performance asset management
solutions, tailored on customer needs, to be
implemented.
Ti-SCADA implements a Real Time condition control
of your asset, through a powerful Human Machine
Interface (HMI) fully configurable, web based,
displaying graphs, charts, trends, KPI , historical
data, alarms and customizable reports.
Single Projects can be created and managed by
means an inbuilt designer module, based on
customizable graphical objects. Projects can be then
run in simulation or stand-alone mode.
Ti-SCADA is able to retrieve, manage and combine
data from a wide set of sources, from detection and
analisys of the properties associated with most
harmful failure processes of MV/HV assets (Partial
discharges, TanDelta, Dissolved Gas Analysis,
“Take advantage of a better diagnostic coverage
exploiting synergies between information
provided by different diagnostic techniques!
PARTIAL DISCHARGE
Techimp technology (patented)
allows real time noise rejection
and classification of PD
phenomena, on the basis of
their pulse shape analysis.
This enhances the likelihood of
PD source identification, even
in the absence of a skilled
operator, increasing
dramatically the signal to noise
ratio.
value added modules
DISSOLVED GAS ANALYSIS
DGA-IS2
(patented) is the new
Techimp Long life and
maintenance-free Intelligent
Sensor, which implements
insulating oil on line
monitoring through CO, H2
gas in oil and moisture
measurement.
Smart sensing algorithms are applied
to guarantee the best diagnostic
performance. (IEC 60599 and IEEE
PC57.104 compliant).
TAN δ (DELTA )
TDG-IS (patented) is the first
and only instrument on the
market providing absolute Tan-
δ measurement in on-line
permanent monitoring of
transformer bushings, granting
the highest level of diagnostic
coverage and reliability.
Corrosive Sulphur, Vibration etc.) including real-time
acquisition of the main plant parameters
(environment data, analogue/digital sensors, third-
party diagnostic systems).
Multi standard protocols (OPC/DNP3/MODBUS/…)
are implemented in order to guarantee high reliability
data exchange needs.
Through Ti-SCADA customers can take advantage of
a wider and integrated vision of the asset and of the
deep correlation between reliability and efficiency
parameters.
Ti-SCADA solutions allows to achieve the greatest
return in the electrical assets management practices.
enterprise
plant
field
process

4. smartgrid
3rd
party
SCADA
Ti-SCADA
transformers
3rd
party
sensors
“all key parameters at a glance
Partial discharge
The most advanced technology for
Partial Discharge detection and
analysis offering, together with the
traditional analysis tool for Partial
Discharge Analysis (PDA),
such as the Phase Resolved Partial
Discharge (PRPD) Pattern, many
other tools:
 enhanced noise rejection
through realtime pulse analysis
based on the patented T-F map
 seperation and classification of
different PD phenomena
 time trend of elaborated
quantities extracted from the
PDA relevant to each single PD
phenomenon, such as Qmax,
repetition rate and many
others.
MV/HV assets
more ?
Transformer monitoring solutions
Dissolved gas analysis
TECHIMP Dissolved Gas Analysis
unit is a permanently-installed multi
-gas analysis system, which allows
to carry out the individual
measurement of both moisture and
key gases (hydrogen H2 and
carbon monoxide CO)
concentration dissolved in oil
transformers. The new product,
DGA-IS2
, ensure extremely long life
and is maintenance free.
Tandelta
TDG-IS is the most advanced and
innovative Tanδ sensor available on
the market. In its typical
installation, it is connected to the
capacitive tap through a tap
adapters and the TD-Sensor
sensors. TD-Guard exploits an
innovative approach to Tanδ
measurement that provides the
absolute Tan values at each
bushing.
Corrosive sulphure sensor
The first solution for continuous
corrosive sulphor monitoring in any
transformer oil.
Techimp Corrosive Sulphur Sensor
provides an on-line continuous
monitoring of oil corrosivity,
including the evaluation of the
concentration of the dibenzyl
disulfide (DBDS).
User experiences
A programmable logic based on
DSL (domain specific language) is
implemented to allow the user to
generate new application features
and business logic based on its
experience and expertise in the
specific field.
more >>

5. >> the best SCADA?
is your SCADA
Ti-SCADA Transformer solution is a Ti-SCADA project, born to be yours.
An innovative solution, starting from Techimp know how, that implements
several and powerful DSL (Domain Specific Languages) components and
innovative features:
Diagnostic features
Partial -Discharge DSL: provides the main functions related to partial discharge,
such as Pattern, Time Frequency Map, Separation, PD Identification, Millivolt to
PicoCoulomb conversion via IEC60270 certified algorithms, alerting, etc.
Dissolved Gas Analysis DSL: function related to the analysis of gas in
transformer insulating oil, with alerting implemented.
Tan delta DSL: function related to transformer bushing diagnostics, with alerting
implemented.
Sulfur Corrosion: function related to the analysis of the effects of copper
corrosion due to sulfur, and relevant risk of insulation failure.
Any other sensors related to diagnostic properties or environmental-operational
quantities
System features
Monitoring DSLs: Functions related to monitoring domain, to interact directly
with the behavior of the diagnostic system.
Controlling DSLs: Functions related to the update of derived (configured by
user) measure, and to the delivery of commands to end items.
“your scada in a simple way
basic sensors?
Ti-SCADA
many sensors or
many assets?
Ti-SCADA
Ti-SCADA
The practice of managing
assets to achieve the greates
return, takes a step forward.
Domain experts can implement
directly Business Logic
“just open your browser and
start to configure”

6. TECHIMP HQ | Via Toscana, 11/C Zola Predosa (BO), Italy | Tel +3905119986050 | www.techimp.com
Ti-SCADA
Theproductandtheinformationcontainedhereinmaybechangedatanytimewithoutpriornotification.Thisdocumentnoranypartsthereofmaynotbereproducedortransmittedinanyformeitherelectronicallyormechanically,includingphotocopyingandrecording,withouttheexpresswrittenconsentofTechimpHQS.p.A