This document provides instructions for operating a Saim series thermal imaging riflescope. It describes the components of the riflescope, how to install and change batteries, how to power on and adjust settings, and how to perform key functions like zeroing the reticle and using the shortcut menu. The summary focuses on setup, controls, and zeroing procedures.
Instruction Manual ATN X-Sight HD Series Weapon Sights | Optics TradeOptics-Trade
The document provides instructions for operating the ATN X-Sight HD series of weapon sights. It summarizes the key features of the sights, including day/night vision capabilities, recording video and photos, and integration of sensors for GPS, gyroscope, and more. The document outlines how to install batteries, insert memory cards, and mount the sight on a firearm. It provides details on operating the sight, adjusting settings through on-scope menus, and focusing the lenses. Additional accessories like infrared illuminators are also described.
Instruction Manual | Infiray Saim SCH50 Series | Optics TradeOptics-Trade
The document provides safety and operating instructions for the InfiRay Outdoor Saim SCH Series thermal imaging riflescope. Key points include:
- Do not point the lens at intense heat sources like the sun as it can damage components. Do not allow small children to handle it due to small parts.
- Proper storage is in a dry, well-ventilated area and remove batteries for long-term storage. Operating temperature range is -20°C to +50°C.
- The riflescope has a 640x512 resolution, 50Hz frame rate, and can detect targets up to 2597m. It is operated via menu, power, and camera buttons and has reticle, image, and system setting
This document is a user manual for the Burris Thermal Riflescopes BTS 35 and BTS 50 models. It provides instructions on installation and use of the riflescopes. Key points include:
- The riflescopes use a single 18650 battery and have functions controlled by power and roller buttons.
- Settings like color palette, brightness, contrast and zoom can be adjusted in the scope's menu.
- Features like ranging, zeroing, and calibration are described to estimate target distances, sight in the scope, and correct the image.
- Maintenance instructions are provided to properly store and clean the thermal riflescope.
InfiRay Thermal E3 Max V2 Instruction Manual - Optics TradeOptics-Trade
This document provides instructions for operating an infrared thermal monocular device. It describes how to power on and off the device, enter standby mode, switch image modes, use digital and optical zoom, take photos and videos, track hot spots, use the laser pointer and rangefinder, access device settings and calibration modes, connect to WiFi, and charge the battery. The document also provides technical specifications for the device such as resolution, field of view, detection range, and battery life. Safety and operation notes are also included.
This document provides instructions for operating an infrared thermal monocular device. It describes how to power on and off the device, adjust settings like image mode and zoom, take photos and videos, and access additional functions through the device menu like calibration, WiFi connection, and factory resets. The document also provides technical specifications for the device such as resolution, frame rate, battery life, and detection range. Safety and operation notes are provided at the end.
This document provides instructions for operating an infrared thermal monocular device. It describes how to power on and off the device, enter standby mode, switch image modes, use digital and optical zoom, take photos and videos, track hot spots, use the laser pointer and rangefinder, access device settings and calibration modes, connect to WiFi, and charge the battery. The document also provides technical specifications for the device such as resolution, field of view, detection range, and battery life. Safety and operation notes are also included.
This document is the user manual for the Xmini multifunction thermal imager. It provides an overview of the product, descriptions of its features and functions. The manual also covers operation instructions, maintenance procedures, troubleshooting tips, and safety regulations for the Xmini thermal imaging device.
InfiRay Mini MH25 Instruction Manual - Optics TradeOptics-Trade
This document is the user manual for the Xmini multifunction thermal imager. It provides an overview of the product, detailing its features such as resolution, response spectrum, and frame rate. The manual describes the product components, operation functions including power on/off and electronic magnification. It also covers preventative maintenance like battery replacement, product cleaning, and general troubleshooting.
Instruction Manual ATN X-Sight HD Series Weapon Sights | Optics TradeOptics-Trade
The document provides instructions for operating the ATN X-Sight HD series of weapon sights. It summarizes the key features of the sights, including day/night vision capabilities, recording video and photos, and integration of sensors for GPS, gyroscope, and more. The document outlines how to install batteries, insert memory cards, and mount the sight on a firearm. It provides details on operating the sight, adjusting settings through on-scope menus, and focusing the lenses. Additional accessories like infrared illuminators are also described.
Instruction Manual | Infiray Saim SCH50 Series | Optics TradeOptics-Trade
The document provides safety and operating instructions for the InfiRay Outdoor Saim SCH Series thermal imaging riflescope. Key points include:
- Do not point the lens at intense heat sources like the sun as it can damage components. Do not allow small children to handle it due to small parts.
- Proper storage is in a dry, well-ventilated area and remove batteries for long-term storage. Operating temperature range is -20°C to +50°C.
- The riflescope has a 640x512 resolution, 50Hz frame rate, and can detect targets up to 2597m. It is operated via menu, power, and camera buttons and has reticle, image, and system setting
This document is a user manual for the Burris Thermal Riflescopes BTS 35 and BTS 50 models. It provides instructions on installation and use of the riflescopes. Key points include:
- The riflescopes use a single 18650 battery and have functions controlled by power and roller buttons.
- Settings like color palette, brightness, contrast and zoom can be adjusted in the scope's menu.
- Features like ranging, zeroing, and calibration are described to estimate target distances, sight in the scope, and correct the image.
- Maintenance instructions are provided to properly store and clean the thermal riflescope.
InfiRay Thermal E3 Max V2 Instruction Manual - Optics TradeOptics-Trade
This document provides instructions for operating an infrared thermal monocular device. It describes how to power on and off the device, enter standby mode, switch image modes, use digital and optical zoom, take photos and videos, track hot spots, use the laser pointer and rangefinder, access device settings and calibration modes, connect to WiFi, and charge the battery. The document also provides technical specifications for the device such as resolution, field of view, detection range, and battery life. Safety and operation notes are also included.
This document provides instructions for operating an infrared thermal monocular device. It describes how to power on and off the device, adjust settings like image mode and zoom, take photos and videos, and access additional functions through the device menu like calibration, WiFi connection, and factory resets. The document also provides technical specifications for the device such as resolution, frame rate, battery life, and detection range. Safety and operation notes are provided at the end.
This document provides instructions for operating an infrared thermal monocular device. It describes how to power on and off the device, enter standby mode, switch image modes, use digital and optical zoom, take photos and videos, track hot spots, use the laser pointer and rangefinder, access device settings and calibration modes, connect to WiFi, and charge the battery. The document also provides technical specifications for the device such as resolution, field of view, detection range, and battery life. Safety and operation notes are also included.
This document is the user manual for the Xmini multifunction thermal imager. It provides an overview of the product, descriptions of its features and functions. The manual also covers operation instructions, maintenance procedures, troubleshooting tips, and safety regulations for the Xmini thermal imaging device.
InfiRay Mini MH25 Instruction Manual - Optics TradeOptics-Trade
This document is the user manual for the Xmini multifunction thermal imager. It provides an overview of the product, detailing its features such as resolution, response spectrum, and frame rate. The manual describes the product components, operation functions including power on/off and electronic magnification. It also covers preventative maintenance like battery replacement, product cleaning, and general troubleshooting.
The Clip T Series is a compact thermal imaging attachment that can be used with riflescopes. It uses a 12μm detector and OLED display. Key features include its small size, light weight, and long battery life of up to 3.5 hours. It mounts onto scopes using threaded adapters and can be operated with buttons to turn on/off, adjust settings, and calibrate the image.
This document provides instructions for using a USB3.0 HD color video camera. It contains 3 sections:
1. An overview of the camera accessories, fast installation instructions, and camera highlights.
2. Explanations of the camera interfaces, remote controller, and IR remote controller usage.
3. Details on the RS-232 interface and VISCA protocol commands for controlling the camera.
The document provides information about the key components and controls of a digital camera. It discusses the principle of photography and how light rays pass through the camera lens to form images on the light-sensitive material, just as they do in the human eye. It identifies the three main controls needed to produce a sharp image - the light-tight box, lens, shutter, and holder for light-sensitive material. It then provides details about various camera parts, including those that control aperture, shutter speed, focus, viewing, flash, and more. It explains the functions of lenses, buttons, dials and other features that allow photographers to properly operate the camera and capture quality images.
FLIR T420, FLIR T420 Thermal Imaging Camera FLIR T 420raymondbaxterrdx
This document provides an overview of FLIR T-Series infrared cameras. It includes descriptions of the screen elements, rear view, front view, connectors, and quick start guide. Additional resources like documentation, customer support, training courses, and websites are also listed.
The document summarizes the key features and functions of the TANDBERG Video Conferencing System. It describes the built-in camera, codec, remote control, microphone, and provides step-by-step instructions on starting up the system, making and ending calls, controlling cameras and video sources, using presets, and adjusting volume.
1. The document provides instructions for operating a night vision device, including how to install batteries, adjust lenses, operate modes like infrared and red dot, and configure settings through the menu.
2. It cautions users not to look directly at the infrared light or aim it at flammable objects closely due to fire risk, and only to use the specified battery voltage.
3. The device has various components like lenses, buttons, and ports that are described.
The document provides a user manual for the ZOOM Series Thermal Camera. It includes 3 sentences:
The manual outlines the technical specifications, components, buttons, menu operations, photographing, video recording, and other functions of the ZOOM Series Thermal Camera. The camera has features like dual-FOV lens, digital zoom, AMOLED display, and built-in memory for storing photos and videos. The document provides detailed instructions for operating the camera and its various modes and settings.
The document is a user manual for Burris Thermal Clip-On sights, models BTC 35 and BTC 50. It provides instructions on operating the device, including powering on/off, adjusting focus and settings, changing display modes, and maintaining the device. Accessories that can be used with the sights are also listed. The manual contains technical specifications for the models and explains icons, battery indicators, storage guidelines, and warranty information.
Liemke Merlin Clip On 35 Instruction Manual | Optics TradeOptics-Trade
This document provides specifications and operating instructions for the Merlin 35 thermal imaging clip-on device. Key details include:
- The device should be handled carefully and lenses kept clean to avoid damage.
- Batteries may need recharging if not used for long periods and should be removed for storage.
- Various menu and display options are accessible through the control buttons for settings like brightness, palettes, and zoom.
- Proper installation and handling of batteries is described.
- Technical specifications for the detector, optics, display, power, and environmental compatibility are provided.
This document provides an overview of basic field production using the Sony Z150 video camera. It covers topics such as camera controls and settings, capturing quality images and audio, composition techniques, lighting, and essential production elements. The camera manual is organized into 6 chapters that explain how to operate the camera's lens, viewfinders, battery, memory cards, recording functions, and tripod mounting. It also provides guidance on focus and zoom controls, exposure settings, white balance, shot types, interviewing, audio equipment, microphone setup, and storytelling fundamentals.
The document is a user manual for Burris Thermal Hand Held sights, specifically the BTH 25, BTH 35, and BTH 50 models. It provides specifications, operating instructions, and maintenance guidelines. Key features include a focus ring, photo/video button, diopter knob, and color display. The manual describes setup, controls, menu navigation, calibration, WiFi connectivity, video output, charging, storage, and warranty information.
This user manual provides instructions for using the Clip CML25 thermal imaging attachment. It describes the components, specifications, functions, and operation of the device. Key functions include switching the device on/off, adjusting settings in the shortcut and advanced menus, calibrating the image and compass, and maintaining the device by cleaning and replacing batteries. Troubleshooting tips are provided for issues like blurred images, no video output, or failure to start up.
Instruction Manual | Sightmark 4K Max 3-24x50 | Optics TradeOptics-Trade
The document is a user manual for the Sightmark Wraith 4K Max digital riflescope. It includes the following key details:
- The riflescope has a 4000x3000 pixel CMOS sensor for low-light detection up to 300 yards and includes daytime color and night vision modes.
- Additional features include 3-24x digital zoom, built-in 4K video recording, internal rechargeable battery, and IPX5 water resistance rating.
- The manual provides instructions for operating the various settings and functions like adjusting magnification, focus, brightness, reticle options, and using the integrated rangefinder. Proper setup of diopter and focus is also outlined.
This document provides a 3-sentence summary of the key equipment and operations at Manhattan Neighborhood Network's production studios:
The document outlines the primary recording options of SD card recorders and XDCAM disks, and how to format, insert media, and operate these recorders. It also describes the intercom system, on-air telephones, teleprompter, cameras, audio board, and other production equipment. Proper use of the equipment like cameras, audio board, switcher, and timer are explained to help producers successfully record and create their shows within the designated time lengths.
The document provides instructions for using a CCD tissue box camera. It describes the components of the camera including buttons and ports. It then lists 12 steps for operating the camera, such as turning it on and off, taking photos and videos, connecting it to a computer and troubleshooting issues. The document concludes with additional notes about usage including legal compliance, battery life, file storage and disposal of the camera.
1. Use a cloud service like Google Contacts or iCloud to automatically sync contacts between devices.
2. Connect both phones using a USB cable and use a file manager app to transfer the contacts file.
3. Log in to the contacts app on your new phone using the same account as your old phone to merge contacts.
This document provides instructions for using a thermal imaging camera. It includes 3 parts:
1. An overview of the camera components including the lens, display interface, buttons, and battery compartment.
2. Instructions for basic operation of the camera including turning it on/off, adjusting brightness and focus, changing color palettes.
3. Additional settings that can be adjusted through the camera menu including video output, WiFi, laser, and auto power off settings.
Instruction Manual | Guide TA Series | Optics TradeOptics-Trade
This document provides instructions for operating a TA Series thermal imager. It begins with safety cautions and lists standard accessories. Sections describe the device parts and functions, including buttons to power on/off, adjust settings, and enter menus. The menus allow settings calibration models, video output, brightness, and more. Battery level is displayed in the upper right corner. The document is intended to help users understand and operate the thermal imager.
The document describes the main parts of a typical digital camera, including DSLR cameras. It lists components such as the power switch, LCD display, memory card slot, lens mount, shutter button, and viewfinder. For DSLRs specifically, it identifies the mirror, microphone, built-in flash, and additional buttons and dials for controlling settings displayed in the viewfinder like aperture, shutter speed, and ISO. The rear view also notes the LCD monitor, menu and playback buttons, and live view and movie shooting functions.
1. The document provides instructions and specifications for a digital night vision device. It details how to operate the device safely, install components like batteries, and adjust settings.
2. Menu options are described that allow configuring display settings, recording features, and other device options. Cautions are provided about safe eye and equipment use.
3. Technical specifications include supported wireless standards, voltage ranges, and operating temperature for the device. The document also provides warranty terms and contact information.
The Clip T Series is a compact thermal imaging attachment that can be used with riflescopes. It uses a 12μm detector and OLED display. Key features include its small size, light weight, and long battery life of up to 3.5 hours. It mounts onto scopes using threaded adapters and can be operated with buttons to turn on/off, adjust settings, and calibrate the image.
This document provides instructions for using a USB3.0 HD color video camera. It contains 3 sections:
1. An overview of the camera accessories, fast installation instructions, and camera highlights.
2. Explanations of the camera interfaces, remote controller, and IR remote controller usage.
3. Details on the RS-232 interface and VISCA protocol commands for controlling the camera.
The document provides information about the key components and controls of a digital camera. It discusses the principle of photography and how light rays pass through the camera lens to form images on the light-sensitive material, just as they do in the human eye. It identifies the three main controls needed to produce a sharp image - the light-tight box, lens, shutter, and holder for light-sensitive material. It then provides details about various camera parts, including those that control aperture, shutter speed, focus, viewing, flash, and more. It explains the functions of lenses, buttons, dials and other features that allow photographers to properly operate the camera and capture quality images.
FLIR T420, FLIR T420 Thermal Imaging Camera FLIR T 420raymondbaxterrdx
This document provides an overview of FLIR T-Series infrared cameras. It includes descriptions of the screen elements, rear view, front view, connectors, and quick start guide. Additional resources like documentation, customer support, training courses, and websites are also listed.
The document summarizes the key features and functions of the TANDBERG Video Conferencing System. It describes the built-in camera, codec, remote control, microphone, and provides step-by-step instructions on starting up the system, making and ending calls, controlling cameras and video sources, using presets, and adjusting volume.
1. The document provides instructions for operating a night vision device, including how to install batteries, adjust lenses, operate modes like infrared and red dot, and configure settings through the menu.
2. It cautions users not to look directly at the infrared light or aim it at flammable objects closely due to fire risk, and only to use the specified battery voltage.
3. The device has various components like lenses, buttons, and ports that are described.
The document provides a user manual for the ZOOM Series Thermal Camera. It includes 3 sentences:
The manual outlines the technical specifications, components, buttons, menu operations, photographing, video recording, and other functions of the ZOOM Series Thermal Camera. The camera has features like dual-FOV lens, digital zoom, AMOLED display, and built-in memory for storing photos and videos. The document provides detailed instructions for operating the camera and its various modes and settings.
The document is a user manual for Burris Thermal Clip-On sights, models BTC 35 and BTC 50. It provides instructions on operating the device, including powering on/off, adjusting focus and settings, changing display modes, and maintaining the device. Accessories that can be used with the sights are also listed. The manual contains technical specifications for the models and explains icons, battery indicators, storage guidelines, and warranty information.
Liemke Merlin Clip On 35 Instruction Manual | Optics TradeOptics-Trade
This document provides specifications and operating instructions for the Merlin 35 thermal imaging clip-on device. Key details include:
- The device should be handled carefully and lenses kept clean to avoid damage.
- Batteries may need recharging if not used for long periods and should be removed for storage.
- Various menu and display options are accessible through the control buttons for settings like brightness, palettes, and zoom.
- Proper installation and handling of batteries is described.
- Technical specifications for the detector, optics, display, power, and environmental compatibility are provided.
This document provides an overview of basic field production using the Sony Z150 video camera. It covers topics such as camera controls and settings, capturing quality images and audio, composition techniques, lighting, and essential production elements. The camera manual is organized into 6 chapters that explain how to operate the camera's lens, viewfinders, battery, memory cards, recording functions, and tripod mounting. It also provides guidance on focus and zoom controls, exposure settings, white balance, shot types, interviewing, audio equipment, microphone setup, and storytelling fundamentals.
The document is a user manual for Burris Thermal Hand Held sights, specifically the BTH 25, BTH 35, and BTH 50 models. It provides specifications, operating instructions, and maintenance guidelines. Key features include a focus ring, photo/video button, diopter knob, and color display. The manual describes setup, controls, menu navigation, calibration, WiFi connectivity, video output, charging, storage, and warranty information.
This user manual provides instructions for using the Clip CML25 thermal imaging attachment. It describes the components, specifications, functions, and operation of the device. Key functions include switching the device on/off, adjusting settings in the shortcut and advanced menus, calibrating the image and compass, and maintaining the device by cleaning and replacing batteries. Troubleshooting tips are provided for issues like blurred images, no video output, or failure to start up.
Instruction Manual | Sightmark 4K Max 3-24x50 | Optics TradeOptics-Trade
The document is a user manual for the Sightmark Wraith 4K Max digital riflescope. It includes the following key details:
- The riflescope has a 4000x3000 pixel CMOS sensor for low-light detection up to 300 yards and includes daytime color and night vision modes.
- Additional features include 3-24x digital zoom, built-in 4K video recording, internal rechargeable battery, and IPX5 water resistance rating.
- The manual provides instructions for operating the various settings and functions like adjusting magnification, focus, brightness, reticle options, and using the integrated rangefinder. Proper setup of diopter and focus is also outlined.
This document provides a 3-sentence summary of the key equipment and operations at Manhattan Neighborhood Network's production studios:
The document outlines the primary recording options of SD card recorders and XDCAM disks, and how to format, insert media, and operate these recorders. It also describes the intercom system, on-air telephones, teleprompter, cameras, audio board, and other production equipment. Proper use of the equipment like cameras, audio board, switcher, and timer are explained to help producers successfully record and create their shows within the designated time lengths.
The document provides instructions for using a CCD tissue box camera. It describes the components of the camera including buttons and ports. It then lists 12 steps for operating the camera, such as turning it on and off, taking photos and videos, connecting it to a computer and troubleshooting issues. The document concludes with additional notes about usage including legal compliance, battery life, file storage and disposal of the camera.
1. Use a cloud service like Google Contacts or iCloud to automatically sync contacts between devices.
2. Connect both phones using a USB cable and use a file manager app to transfer the contacts file.
3. Log in to the contacts app on your new phone using the same account as your old phone to merge contacts.
This document provides instructions for using a thermal imaging camera. It includes 3 parts:
1. An overview of the camera components including the lens, display interface, buttons, and battery compartment.
2. Instructions for basic operation of the camera including turning it on/off, adjusting brightness and focus, changing color palettes.
3. Additional settings that can be adjusted through the camera menu including video output, WiFi, laser, and auto power off settings.
Instruction Manual | Guide TA Series | Optics TradeOptics-Trade
This document provides instructions for operating a TA Series thermal imager. It begins with safety cautions and lists standard accessories. Sections describe the device parts and functions, including buttons to power on/off, adjust settings, and enter menus. The menus allow settings calibration models, video output, brightness, and more. Battery level is displayed in the upper right corner. The document is intended to help users understand and operate the thermal imager.
The document describes the main parts of a typical digital camera, including DSLR cameras. It lists components such as the power switch, LCD display, memory card slot, lens mount, shutter button, and viewfinder. For DSLRs specifically, it identifies the mirror, microphone, built-in flash, and additional buttons and dials for controlling settings displayed in the viewfinder like aperture, shutter speed, and ISO. The rear view also notes the LCD monitor, menu and playback buttons, and live view and movie shooting functions.
1. The document provides instructions and specifications for a digital night vision device. It details how to operate the device safely, install components like batteries, and adjust settings.
2. Menu options are described that allow configuring display settings, recording features, and other device options. Cautions are provided about safe eye and equipment use.
3. Technical specifications include supported wireless standards, voltage ranges, and operating temperature for the device. The document also provides warranty terms and contact information.
Similar to Instruction Manual | InfiRay Saim SCT V2 Thermal Riflescopes | Optics Trade (20)
Technical Data | ThermTec Wild 325 | Optics TradeOptics-Trade
The Wild 325 is a thermal imaging monocular with 384*288 thermal resolution and an NETD of less than 18mk. It features automatic object detection, AI distance measurement, 1x-4x digital zoom, various pseudo colors, joystick control, a large aperture, 1024*768 OLED display, 10 hour battery life, and forest/target outline modes. Weighing 470g and measuring 190.2x69.3x58.7mm, it is used for night hunting, observation, rescue operations, and hiking while coming with accessories like a monocular, lanyard, lens cloth, manual, bag, USB cable, hand strap, charger, and two lithium batteries.
Wild Series Thermal Imaging Monocular User Manual outlines key features and functions of the device. It has an uncooled infrared detector with less than 18mk NETD, 1x-4x digital zoom, various detection modes including AI and laser rangefinder combination. The manual covers device operation including charging, power on/off, button functions, menu settings, capture and recording functions. Technical specifications and regulatory information are also provided.
Technical Data | ThermTec Hunt 335 | Optics TradeOptics-Trade
The Thermal Clip-On Hunt335 is a 384*288 thermal resolution clip-on device with 0.39-inch OLED display, magnesium alloy housing, and lightweight compact design. It has features like self-learning image correction, ultra-long image stability, automatic object detection and distance measurement, various display modes, up to 7 hours battery life, and wireless remote control and app connectivity. It is intended for night hunting and observation applications.
The document is a user manual for ThermTec's Hunt Series thermal clip-on device. It provides instructions on safely using the device, including not pointing it at intense heat sources. It also details features like the 12μm thermal imaging detector, 1024x768 resolution OLED display, and IP67 protection rating. The manual covers device components, menu operation, recording and sharing capabilities, and maintenance guidelines.
Flyer | Guide DN Series Handheld Digital Binoculars | Optics TradeOptics-Trade
The DN30 is a handheld digital binocular featuring 4K resolution imaging, day and night usage capabilities, and WIFI connectivity. It uses a 3840x2160 CMOS sensor and 1920x1080 AMOLED displays to provide high-quality color images in daylight and infrared images at night. Additional features include laser rangefinding up to 600 meters, IP67 waterproofing, and over 6 hours of battery life. The DN30 is suitable for outdoor observation, law enforcement, night hunting, and search and rescue applications.
Instruction Manual | Pard FD1 Digital NV Front Attachment | Optics TradeOptics-Trade
This document provides installation and operation instructions for a digital night vision front clip-on device. It includes steps for unboxing the device, installing the battery, powering on the device, and installing the adapter to attach the device to a rifle scope. The document provides details on the device's components and specifications, as well as precautions for use and storage.
Instruction Manual | EOTech Vudu X 2-12x40 | Optics TradeOptics-Trade
The document provides instructions for use and maintenance of EOTECH's 2-12x40 SFP Vudu X precision riflescope. It details the riflescope's features including its reticles, adjustments for magnification, focus, illumination and windage/elevation. It also provides steps for battery replacement, mounting, bore sighting, zeroing and cleaning the riflescope.
Instruction Manual | EOTech Vudu X 1-6x24 | Optics TradeOptics-Trade
The document provides instructions for use and maintenance of EOTECH's 1-6x24 SFP Vudu X riflescope. It describes the riflescope's features such as its magnification range of 1-6x, adjustable reticles, and illumination settings. It then provides directions for adjusting the magnification, reticle focus, illumination, and windage/elevation turrets. The document also includes guidelines for re-indexing the turret dials, replacing batteries, mounting the riflescope, achieving proper eye relief, and installing the quick throw lever.
Instruction Manual | Nightforce CFS 6-36x50 F1 | Optics TradeOptics-Trade
The document is an owner's manual for a Nightforce Configurable Field Spotting Scope (CFS) 6-36x50mm F1. It contains 3 sentences:
The manual provides instructions for use, maintenance, and warranty information for the Nightforce CFS 6-36x50mm spotting scope, including focusing the image, adjusting magnification and diopter settings, mounting on a tripod, and installing optional accessory cages and rails. Key features of the spotting scope such as the rapid focus ring, magnification ring, and integrated dovetail base are described along with what is included in the product box and proper lens cap usage. Safety warnings and export restrictions are also noted at the beginning.
The document provides instructions for use and care of an Athlon spotting scope. It details how to mount the scope to a tripod, adjust the eyecup and magnification, focus the reticle and scope, use the sunshade, and care for the lenses. It also provides information on the reticle including how to use it for ranging targets at different distances.
Croatia vs Italy Modric's Last Dance Croatia's UEFA Euro 2024 Journey and Ita...Eticketing.co
UEFA Euro 2024 fans worldwide can book Croatia vs Italy Tickets from our online platform www.eticketing.co. Fans can book Euro Cup Germany Tickets on our website at discounted prices.
Spain vs Croatia Euro 2024 Spain's Chance to Shine on the International Stage...Eticketing.co
Euro 2024 fans worldwide can book Spain vs Croatia Tickets from our online platform www.eticketing.co. Fans can book Euro Cup Germany Tickets on our website at discounted prices.
Georgia vs Portugal Georgia UEFA Euro 2024 Squad Khvicha Kvaratskhelia Leads ...Eticketing.co
UEFA Euro 2024 fans worldwide can book Georgia vs Portugal Tickets from our online platform www.eticketing.co. Fans can book Euro Cup Germany Tickets on our website at discounted prices.
Psaroudakis: Family and Football – The Psaroudakis Success StoryPsaroudakis
Psaroudakis, a name that resonates with football fans around the globe, is a testament to the powerful synergy between familial support and individual passion. Born on March 10, 1992, in the historic city of Heraklion, Crete, Psaroudakis’ journey to international football stardom is a compelling narrative of dedication, perseverance, and unwavering family support. His story not only highlights his athletic prowess but also underscores the crucial role his family played in shaping his career and character.
Psaroudakis’ early life in Heraklion was deeply influenced by a supportive and nurturing family environment. His father, a former semi-professional footballer, recognized Psaroudakis’ potential from an early age. Acting as his first coach, his father’s guidance was instrumental in igniting Psaroudakis’ passion for football. This paternal influence instilled in him a strong work ethic and fundamental skills that would become the foundation of his future success. His mother, a dedicated homemaker, provided a stable and nurturing environment, ensuring that Psaroudakis could pursue his dreams without any hindrances.
From a young age, Psaroudakis showed an innate talent for football. Growing up in Heraklion, he spent countless hours playing football in local parks and streets with friends and family. His natural ability was evident even in these informal settings, and his enthusiasm for the game was infectious. By the age of five, Psaroudakis had joined a local youth football club, where his skills began to flourish. His father’s role as his first coach during these formative years was crucial, as he emphasized not only technical skills but also the importance of discipline and teamwork.
The transition from playing in local parks to joining a structured football environment marked a significant step in Psaroudakis’ journey. At the age of ten, he joined the youth academy of OFI Crete, one of Greece’s most esteemed football clubs. This move marked the beginning of a more rigorous and professional approach to his training. The academy environment was demanding, focusing on honing technical abilities and instilling values of sportsmanship and dedication. Psaroudakis’ dedication to his craft was evident as he quickly rose through the ranks, becoming a standout player in the youth teams.
The support of Psaroudakis’ family was unwavering during this critical period. His father continued to be a source of guidance and mentorship, while his mother ensured that he had everything he needed to succeed. Their collective efforts created a balanced environment where Psaroudakis could focus entirely on his development as a footballer. This familial support was not just about providing the basics; it was about creating an environment where Psaroudakis felt encouraged and motivated to pursue his dreams relentlessly.
As Psaroudakis transitioned from the youth academy to professional football, the challenges became more significant.
Match By Match Detailed Schedule Of The ICC Men's T20 World Cup 2024.pdfmouthhunt5
20 Teams, One Trophy: What to Expect from the ICC Men's T20 World Cup 2024
The ICC Men's T20 World Cup 2024 is set to be an exciting event, co-hosted by the West Indies and the USA from June 1 to June 29, 2024. This edition of the tournament will feature a record 20 teams divided into four groups, competing across 55 matches for the prestigious title.
Netherlands vs Austria Netherlands Face Familiar Foes in Euro Cup Germany Gro...Eticketing.co
The Netherlands are in Group D in Euro Cup Germany - and, unpaid to this, they will be coming up against familiar foes. Remarkably, they have played France, who have fashioned some of the greatest players of all time, 30 times throughout history. Despite France being more effective in major competitions, including captivating the World Cup in 2018, Holland have the greater head-to-head record.
We offer Euro Cup Tickets to admirers who can get Netherlands vs Austria Tickets through our trusted online ticketing marketplace. Eticketing.co is the most reliable source for booking Euro Cup Final Tickets. Sign up for the latest Euro Cup Germany Ticket alert.
UEFA Euro 2024 Tickets | Euro 2024 Tickets | Netherlands vs Austria Tickets
However, in 2023, they played one another twice, with France endearing both matches 4-0 and 2-1 individually. Against Poland and Austria, the Netherlands also have a stout record, winning just under half the matches. They faced Austria at Euro 2020, engaging 2-0, and they haven't lost to Poland since 1979.
The lettering is on the wall for Holland to qualify for the knockouts, but nothing is failsafe. The Netherlands kickstart their Euros campaign against Poland on Sunday, June 16th. In Hamburg, they will have to go up against one of the best strikers in the world, Robert Lewandowski.
Netherlands vs Austria: Tough Challenges Await the Netherlands in Euro Cup Germany
Five days later, they travel south to face France in Leipzig, a side led by Kylian Mbappe - one of the finest players in the world currently and one of the most impressive players in his nation's history. To conclude, they face Austria in Berlin, knowing it could be the end of the road if they don't perform.
Ronald Koeman is widely considered one of the more successful Dutch managers in Premier League history, considering the nation has a reputation for struggling to replicate their talents in England. The former Everton manager went against that script and shone — and now he is back managing his nation.
UEFA Euro 2024 Tickets | Euro 2024 Tickets | Euro Cup Germany Tickets | Netherlands vs Austria Tickets
Euro fans worldwide can book Euro Cup Germany Tickets from our online platform, www.eticketing.co. Fans can book Euro Cup 2024 Tickets on our website at discounted prices.
Netherlands vs Austria: Ronald Koeman's Tactical Approach For UEFA Euro 2024
As well as being the highest-scoring defender in history, Koeman is a man with immense tactical knowledge. He returned to manage Holland at the start of 2023 after it was announced Louis van Gaal would retire. His life back in the dugout with the team wasn't easy, as he lost his first match 4-0 to France after going 3-0 down within 21 minutes.
However, he eventually helped them qualify for Euro Cup Germany. The 61-year-old likes to organize his team with a defensive mindset. Some might call it pragmatic as he defends with minimal space between the lines, but that's often needed for international football.
Luciano Spalletti Leads Italy's Transition at UEFA Euro 2024.docxEuro Cup 2024 Tickets
Italy are the defending European champs, but after Luciano Spalletti swapped Roberto Mancini last September, they are still taking the cautious first steps of a new era
Olympic 2024 Key Players and Teams to Watch in Men's and Women's Football at ...Eticketing.co
Olympic 2024 fans worldwide can book Olympic Football Tickets from our online platforms e-ticketing. co. Fans can book Olympic Tickets on our website at discounted prices. Experience the thrill of the Games in Paris and support your favorites athletes as they compete for glory.
Paris 2024 History-making Matildas team selected for Olympic Games.pdfEticketing.co
Paris 2024 fans worldwide can book Olympic Football Tickets from our online platforms e-ticketing. co. Fans can book Olympic Tickets on our website at discounted prices. Experience the thrill of the Games in Paris and support your favourite athletes as they compete for glory.
Turkey vs Georgia Tickets: Turkey's Provisional Squad for UEFA Euro 2024, Key...Eticketing.co
Euro Cup Germany fans worldwide can book Euro 2024 Tickets from our online platform www.eticketing.co.Fans can book Euro Cup 2024 Tickets on our website at discounted prices.
Belgium vs Romania Injuries and Patience in Belgium’s Euro Cup Germany Squad....Eticketing.co
Belgium coach Domenico Tedesco will wait for several key players to recover from injury. Even if it means they miss the opening Euro Cup Germany stages of the European Championship in Germany this month. Veteran defender Jan Vertonghen, midfielder Youri Tielemans and defender Arthur. Theate are being given time to play in the tournament because they are considered vital to Belgium’s cause, Tedesco said on Tuesday.
We offer Euro Cup Tickets to admirers who can get Belgium vs Romania Tickets through our trusted online ticketing marketplace. Eticketing.co is the most reliable source for booking Euro Cup Final Tickets. Sign up for the latest Euro Cup Germany Ticket alert.
UEFA Euro 2024 Tickets | Euro 2024 Tickets | Euro Cup Germany Tickets | Belgium vs Romania Tickets
"Of course, you prefer to take players who are fully fit, but that's okay. We want to wait and be patient for some players even if they cannot play in those first matches," he told a press conference. The 37-year-old Vertonghen, Belgium’s Euro Cup 2024 most-capped international with 154 appearances, is struggling to shake off a groin injury.
"He will be there normally. This also applies to Youri Tielemans and Arthur Theate. The latter's position is very sensitive. We don't have many choices at left back. "It will only change if it turns out that they will only be available when, say, the final of the Euro 2024 Championship comes around. That's too long to wait. "However, I am confident that the injured boys are on track for the Euros.
Belgium vs Romania: Radu Dragusin Prepares for Crucial Role in Euro Cup Germany
Some of them have taken not one but two steps forward in their rehabilitation," he said. None of the injured players will feature in this week’s warm-up friendlies against Montenegro and Luxembourg. Romania centre-back Radu Dragusin found chances limited at Tottenham Hotspur in the second half of the 2023-24 season.
But is crucial to his country's cause at UEFA Euro 2024 where his aerial ability, physicality and hard graft make him a standout player. The 22-year-old moved to North London from Italian side Genoa in January but was kept on the sidelines by the form of another new arrival for the season, Mickey van de Ven, something Romania coach Edward Iordanescu admitted was a concern.
It will mean limited game-time going into the finals, but Dragusin, who cites Netherlands defender Virgil van Dijk as a role model, started every Euro Cup Germany qualifier as Romania went through the campaign unbeaten in their 10 games. He will be among their most important players in their first game in Germany against Ukraine in Munich on June 17, taking the right centre-back role in what is likely to be a back four.
UEFA Euro 2024 Tickets | Euro 2024 Tickets | Euro Cup Germany Tickets | Belgium vs Romania Tickets
Euro fans worldwide can book Euro Cup Germany Tickets from our online platform, www.eticketing.co. Fans can book Euro Cup 2024 Tickets on our website at discounted prices.
Euro Cup Group E Preview, Team Strategies, Key Players, and Tactical Insights...Eticketing.co
We offer Euro Cup Tickets to admirers who can get Belgium vs Romania Tickets through our trusted online ticketing marketplace. Eticketing.co is the most reliable source for booking Euro Cup Final Tickets. Sign up for the latest Euro Cup Germany Ticket alert.
Hesan Soufi's Legacy: Inspiring the Next GenerationHesan Soufi
Hesan Soufi's impact on the game extends far beyond his on-field exploits. With his humility, sportsmanship, and unwavering commitment to excellence, Soufi has become a role model for aspiring footballers worldwide. His legacy lies not only in his achievements but also in the inspiration he provides to the next generation of talented players.
According to the report, the consumption of video content related to IPL 2024 has seen significant growth, nearly 3 times more than the previous season, reflecting an increasing interest of fans.
Italy vs Albania Soul and sacrifice' are the keys to success for Albania at E...Eticketing.co
We offer UEFA Euro 2024 Tickets to admirers who can get Italy vs Albania Tickets through our trusted online ticketing marketplace. Eticketing. co is the most reliable source for booking Euro Cup Final Tickets. Sign up for the latest Euro Cup Germany Ticket alert.
Belgium vs Slovakia Belgium Euro 2024 Golden Generation Faces Euro Cup Final ...Eticketing.co
We offer Euro Cup Tickets to admirers who can get Belgium vs Slovakia Tickets through our trusted online ticketing marketplace. Eticketing.co is the most reliable source for booking Euro Cup Final Tickets. Sign up for the latest Euro Cup Germany Ticket alert.
1. InfiRay Outdoor • Saim SCT Series • Quick Start Guide • 07/2021
www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
2. InfiRay Outdoor • Saim SCT Series • Quick Start Guide • 07/2021 www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
1 Description
The Saim series is a low-cost Thermal Imaging Riflescope, which can be
mounted on various firearms for night hunting and target observation.
Its compact size and lightweight design make it easy to carry. What
makes it outstanding is long operation hours, good concealment and
great ability to detect, recognize and identify objects or targets fast
and easy. The Saim series effective at close and long ranges
irrespective of light and harsh weather conditions, that is, in total
darkness, through heavy smoke, haze, fog, and dust.
2 Components and Controls
1. Eyeshade
2. Eyepiece diopter adjusting ring
3. C (Calibration) button
4. M (Menu) button
5. P (Power) button
6. Type C interface
7. Battery compartment
8. Lens focus ring
9. Objective lens
10.Lens cover
3. InfiRay Outdoor • Saim SCT Series • Quick Start Guide • 07/2021 www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
3 Battery Assembling
Battery installation
➢ Open the battery compartment cover anticlockwise according to the
schematic diagram on the cover.
➢ Install the batteries correctly as shown in Figure 2.
➢ When done, covering and pushing the battery cover till you hear “click”
to ensure both sides of the cover is installed correctly.
Attention
- Disposable batteries are ONLY supported! Risks are existing to use
rechargeable batteries due to nonstandard quality.
- Please do not use different types of batteries or batteries with different
power levels.
- The Saim series supports external power supply via Type-C cable with
a USB icon displayed on the screen.
4 Icons Instructions
Image mode: White hot
Image mode: Black hot
Image mode: Red hot
Image mode: Color
/ / / E-zoom
Display brightness
Image sharpness
Image brightness
Image contrast
Ultraclear mode
Wi-Fi
Auto correction mode
4. InfiRay Outdoor • Saim SCT Series • Quick Start Guide • 07/2021 www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
Video out
PIP
Digital compass
Motion sensor
Battery type
Zeroing type
Image hue
More
Zeroing
Defective pixels calibration
Compass calibration
Time and date
System information
Factory reset
Return to the Main Menu
Battery indicator
5 Operation
➢ Open the lens cover (10).
➢ Press and hold down the P (5) button for 3s to power the riflescope on.
Waite for 6s until thermal image appears on the display.
➢ Diopter Adjustment: Adjust the sharp resolution of the icons on the
display by rotating the diopter adjusting ring (2) of the eyepiece.
➢ Lens Focus Adjustment: rotate the lens focus ring to focus (8) on the
object being observed.
➢ Calibration: calibration the image with a short press of the M (4) and C
(3) button for shutter correction or long press the M (4) and C (3) button
for background correction.
➢ Image Settings: adjust the image mode, display brightness, image
sharpness in the shortcut menu (for more details, see the Shortcut
Menu Functions section)
➢ To power off the riflescope, long press P (5) button for 5s until the
shutdown option menu appears, select the “√” to shut down and “×” to
cancel. Then short press the M (4) button to confirm the selection.
➢ Reticle On: click the M (4) button four times in a row while pressing
5. InfiRay Outdoor • Saim SCT Series • Quick Start Guide • 07/2021 www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
and holding the P (5) + C (3) button to invoke the reticle function for the
first time use, then long press the P (5) + M (4) + C (3) button
simultaneously for 7 seconds to turn the reticle on. This function should
be activated when the reticle first enabled.
Attention
➢ When the reticle is turned off, all the operations related to it in the menu
will be hidden, including the adjustment of the reticle color and pattern
(in shortcut menu), the options of zeroing and blind pixel correction in
the advanced menu.
6 Zeroing
Zeroing is recommended to be done at the temperature close to the
riflescope operating temperature.
Before implementing zeroing setting, please make sure that the reticle is
on and zeroing type is selected in the main menu.
➢ Mount the riflescope on your weapon.
➢ Set a target at 100m distance, and power on the riflescope.
➢ For the first use of the riflescope, please make sure that the reticle is on
before zeroing (according to the instructions of section 5 Operation.).
➢ Long press the M (4) button on the home screen to enter the main
menu.
➢ Select one zeroing profile in the main menu.
➢ Select the Zeroing item, and
press the M (4) button to enter
the Zeroing interface. In the
Zeroing interface, the reticle is
shown as a small cross for
position adjustment.
➢ Then aiming the center of the reticle at the bull’s-eye 100 meters away
and shooting.
➢ Locating the bullet hole after shooting.
➢ If the bullet hole can be seen on the display screen:
⚫ Keeping the position of the device fixed, press and hold the M (4)
and C (3) button at the same time to freeze the image, and a
snowflake icon appears on the upper-left corner of the screen.
⚫ Move the reticle to the position of the actual impact point by the P
(5) or C (3) button.
6. InfiRay Outdoor • Saim SCT Series • Quick Start Guide • 07/2021 www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
⚫ Short press the M (4) button to switch the movement direction
between UP-DOWN and RIGHT-LEFT.
⚫ Press and hold down the M (4) button to save and exit when the
process is done.
➢ If the bullet hole cannot be seen on the display screen:
⚫ Keeping the position of the device fixed, measure the horizontal
and vertical distance between the bull’s eye and the bullet hole.
⚫ According to the measured distance, move the reticle position by
long or short pressing the P (5) or C (3) button until the distance
marked on the scale plate consistent with the measured distance.
⚫ Short press the M (4) button to switch the movement direction
between UP-DOWN and RIGHT-LEFT.
⚫ Press and hold down the M (4) button to save and exit when the
process is done.
Notes
- To ensure the accuracy of the position, aiming the bull’s-eye again and
repeat the operations until the bull’s-eye is hit.
- In the zeroing interface, the reticle moves one pixel with a short
pressing P (5) or C (3) button to the corresponding direction while ten
pixels movement with a long-pressing. One pixel means to move
1.71cm at a distance of 100 meters or 0.62 inches at a distance of 100
yards.
- Short press the P (5) + M (4) + C (3) buttons at the same time to switch
units (cm/m, inch/yard).
- In the zeroing interface, there is a white dot that represents the original
position of the reticle before calibration implement.
- After zeroing, the center of all reticle will be changed accordingly.
7 Shortcut Buttons Instructions
To quickly realize the frequently used functions, the Saim SCT series
made the default shortcut buttons of the most commonly used
functions in the observation interface.
Button Short press Long press
P button E-zoom Power on /off
M button Enter the shortcut menu Enter the main menu
C button Take a photo Video recording
M + C button Shutter correction Background correction
7. InfiRay Outdoor • Saim SCT Series • Quick Start Guide • 07/2021 www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
P + M button
Turn the standby mode
on/off
Turn the stadiametric
rangefinder function
on/off
P + M + C
button
Switch the units between
cm/m and inch/yard
——
8 Shortcut Menu
The basic settings (using the function of smooth digital zoom, adjusting
the display brightness, switching the image palette, adjusting the
image sharpness, selecting the reticle color and pattern) can be
changed using the shortcut menu.
➢ In the home screen, short press the M (4) button to enter the shortcut
menu.
➢ There are three pages and two functions on each page, one at the top
and one at the bottom.
➢ On each page, press the P (5) button briefly to switch the options of the
top function, and press the C (3) button briefly to switch the options of
the bottom function. And each function has four options
➢ Press the M (4) button briefly to switch the next page.
8. InfiRay Outdoor • Saim SCT Series • Quick Start Guide • 07/2021 www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
Shortcut Menu Options and Descriptions
Times of pressing
the M (4) button
Shortcut Menu Interface Operation
1 time
Enter the first page of the shortcut menu to
adjust the image palette and screen
brightness
➢ Short pressing the P (6) button to
adjust image palette from white hot,
black hot, red hot to color.
➢ Short pressing the C (4) button to
adjust the image brightness level from
1 to 4 gradually enhanced.
2 times
Enter the second page of the shortcut menu
to adjust E-zoom and image sharpness
➢ Short pressing the P (6) button to
perform E-zoom parameter x1, x2, x3
and x4.
➢ Short pressing the C (4) button to
adjust the image brightness level from
1 to 4 gradually enhanced.
9. InfiRay Outdoor • Saim SCT Series • Quick Start Guide • 07/2021 www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
3 times
Enter the third page of the shortcut menu to
adjust the image brightness and image
contrast
➢ Short press the P (6) button to
cyclically adjust the image brightness
level from 1 to 4 gradually enhanced.
➢ Short pressing the C (4) button to
adjust the image brightness level from
1 to 4 gradually enhanced.
4 times
Enter the fourth page of the shortcut menu to
adjust reticle color and reticle pattern
➢ Short pressing the P (6) button to
adjust the reticle color: white, black,
red and green.
➢ Short pressing the C (4) button to
select the reticle pattern. There are 8
patterns for selection.
5 times Exit to the home screen from Shortcut Menu ——
10. InfiRay Outdoor • Saim SCT Series • Quick Start Guide • 07/2021 www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
9 Main Menu
➢ In the home screen, press and hold the M (4) button to enter the main
menu, which including Ultraclear mode, Wi-Fi, auto shutter correction,
video output, PIP, compass, motion sensor, battery type, zeroing type,
more.
➢ Press the P (5) or C (3) button to move through the main menu items.
➢ Press the M (4) button briefly to set up the item parameter or to enter the
function interface.
➢ Long press the M (4)
button to exit the main
menu.
Main Menu Options and Descriptions
Ultraclear
Turn Ultraclear mode on/off
➢ Press and hold down the M (4) button to enter the Main Menu.
➢ Select the Ultraclear menu option with the P (5) / C (3) button.
➢ Turn Ultraclear mode on /off with a short press of M (4) button, along with the sound of shutter calibration.
➢ The icon will be displayed on the status bar in the upper left corner of the screen when the Ultraclear mode is on.
➢ Under heavy fog, rain or snow weather, Ultraclear Mode will show more image details.
Wi-Fi
Turn Wi-Fi function on/off
➢ Press and hold down the M (4) button to enter the Main Menu.
➢ Select the Wi-Fi menu option with the P (5) / C (3) button.
11. InfiRay Outdoor • Saim SCT Series • Quick Start Guide • 07/2021 www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
➢ Turn Wi-Fi function on /off with a short press of M (4) button.
➢ The icon will be displayed on the status bar in the upper left corner of the screen when the wi-Fi is on.
Auto shutter correction
Turn the auto shutter correction on/off
➢ Press and hold down the M (4) button to enter the Main Menu.
➢ Select the Auto Shutter Correction menu option with the P (5) / C (3) button.
➢ Briefly press of the M (4) button to turn the auto shutter correction on /off.
➢ The icon will be displayed on the status bar in the upper left corner of the
screen when the auto shutter correction is on.
➢ Before automatic calibration, there will be a 5 second countdown prompt
behind the shutter icon on the status bar, that can be to cancelled this
calibration during countdown with a short press of the Power (3) button.
Video Output
Turn video output on/off
➢ Press and hold down the M (4) button to enter the Main Menu.
➢ Select the Video Output option with the P (5) / C (3) button.
➢ Briefly press of the M (4) button to turn video out on/off.
➢ The icon will be displayed on the lower right corner of the screen when the video output function is on.
➢ Video out function enable connectivity with an eternal display or recording device.
12. InfiRay Outdoor • Saim SCT Series • Quick Start Guide • 07/2021 www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
PIP
Turn Picture-in-Picture on/off
➢ Press and hold down the M (4) button to enter the Main Menu.
➢ Select the PIP option with the P (5) / C (3) button.
➢ Briefly press of the M (4) button to turn PIP on/off.
➢ When the PIP function is on, a small window will appear on the top of the display.
Compass
Turn on/off the digital Compass function
➢ Press and hold down the M (5) button to enter the Main Menu.
➢ Select the Compass menu option with the P (5) / C (3) button.
➢ Briefly press of the M (5) button to turn the digital compass on/off.
➢ When the compass function is turned on, it will reveal in the center of top status bar.
Motion Sensor
Turn on/off the motion sensor
➢ Press and hold down the M (5) button to enter the Main Menu.
➢ Select the Motion Sensor menu option with the P (5) / C (3) button.
➢ Briefly press of the M (5) button to turn the motion sensor on/off.
➢ Two scales are displayed on the right sides of the screen when the motion
sensor is on.
➢ The horizontal scale shows tilt angle, and the vertical one shows pitch angle.
13. InfiRay Outdoor • Saim SCT Series • Quick Start Guide • 07/2021 www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
Battery Type
Select the battery voltage
➢ Press and hold down the M (4) button to enter the Main Menu.
➢ Select the Battery Type option with the P (5) / C (3) button.
➢ Briefly press of the M (4) button to select 3V or 3.7V according the battery voltage.
➢ 3V is selected for dischargeable battery and 3.7V is for chargeable battery, but dischargeable battery is suggested only.
Zeroing Type
Select the zeroing type
➢ Press and hold down the M (4) button to enter the Main Menu.
➢ Select the Zeroing Type option with the P (5) / C (3) button.
➢ There are four types for selection.
➢ Briefly press of the M (4) button to select one zeroing type.
Image hue
Select the image hue
➢ Press and hold down the M (5) button to enter the Main
Menu.
➢ Select the Image Hue option with the P (6) / C (4) button.
➢ Briefly press of the M (5) button to select C or W. C is for
cool hue, and W is for warm hue.
14. InfiRay Outdoor • Saim SCT Series • Quick Start Guide • 07/2021 www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
More
Enter the secondary menu for more settings
➢ Press and hold down the M (5) button to enter the Main Menu.
➢ Select the More menu option with the P (5) / C (3) button.
➢ Briefly press of the M (5) button to enter the secondary menu for more settings,
including zeroing, defective pixels calibration, compass calibration, system
information, factory settings.
Zeroing
Enter the zeroing interface
Saim series support the 100m zeroing distance.
➢ Select the Zeroing option with the P (5) / C (3) button in the More submenu.
➢ Briefly press of the M (4) button to enter the zeroing
interface.
➢ Then aim the center of the reticle at the bull’s-eye 100
meters away and shoot.
➢ Locate the bullet hole after shot.
➢ Then, zero your riflescope according the Section 5
Zeroing.
15. InfiRay Outdoor • Saim SCT Series • Quick Start Guide • 07/2021 www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
Pixels Defect
Calibration
Defect pixels are pixels that do not change brightness compare with others on the image, they are either
brighter or darker than surrounding pixels. Saim series offer the possibility of removing any defective
pixels on the sensor using software, as well as to cancel any deletion.
➢ Select the Pixels Defect Calibration option with the P (5) /
C (3) button in the More submenu.
➢ Briefly press of the M (4) button to enter the pixels defect
calibration interface.
➢ A small cross cursor instead of the reticle will appear on the
center of the screen.
➢ The Picture in Picture (PIP) window will appear on the lower
left corner of the screen. A tooltip is appeared on the bottom of the screen that displays the number of the
blind pixels calibrated, the movement direction and location.
➢ Move the cursor to align with the defective pixel with a short or long press the P (5) / C (3) button. Short
press to move one pixel every time and long press to move ten pixels once.
➢ Switch the movement direction with a short press of the M (4) button.
➢ After selecting the blind pixel, long press P (5) and C (3) button to calibrate the defective pixel, and press
the same button again for cancelation.
➢ Repeat the above processes until all blind pixels are calibrated.
16. InfiRay Outdoor • Saim SCT Series • Quick Start Guide • 07/2021 www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
➢ Press and hold the M (4) button to save the calibration and exit from the pixels defect calibration interface.
Compass
Calibration
Calibrate the digital compass
➢ Select the Compass Calibration option with the P (5) / C (3) button in the More submenu.
➢ Briefly press the M (5) button to enter the Compass Calibration interface.
➢ An icon like a triaxial coordinate system appears on the
screen.
➢ Follow the icon prompt to rotate the riflescope along three
axes at least 360 degrees each axis in the 15 seconds.
➢ After 15s, the calibration is finished and exit to the home
screen.
Time Setting
Reset the system date and time
➢ Select the Time Setting option with the P (5) / C (3) button
in the More submenu
➢ Briefly press the M (5) button to enter the Time Setting
interface.
➢ The order from left to right is year, month, day, hour and
minute. And the time format is in 24-hours format.
➢ Switch among year, month, day, hour and minute with a short press of the M (5) button. The selected item
17. InfiRay Outdoor • Saim SCT Series • Quick Start Guide • 07/2021 www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
will turn blue and two triangle icons will appear above and below the value.
➢ Select the correct value with a short press of the P (5) / C (3) button.
➢ Save settings and exit to the superior menu with a long press of the M (5) button.
System
Information
Show device information
➢ Select the System Information menu option with the P (5) / C (3) button in the More submenu.
➢ The relevant information of riflescope will be shown by a
short press of the M (5) button.
➢ This item allows the user to view the following information
about the riflescope: the product model, GUI version, SYS
Info, Boot version, FPGA, PN and SN number of the
riflescope, Hardware version.
➢ Press and hold the M (5) button to return to the submenu.
Factory Reset
Reset to the Factory Settings
➢ Select the Factory Reset option with the P (5) / C (3) button
in the More submenu.
➢ A prompt box will appear on the screen with a briefly press of
the M (4) button.
➢ Short press the P (5) or C (3) button to select the option. The
18. InfiRay Outdoor • Saim SCT Series • Quick Start Guide • 07/2021 www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
“√” is to reset to the default, and the “×” is to cancel.
➢ Confirm the selection with a short press of the M (4) button and exit to the home screen.
Return
Return to the main menu
➢ Select the Return option by P (5) or C (3) button.
➢ Short press the M (4) button to return to the main menu.
19. InfiRay Outdoor • Saim SCT Series • Quick Start Guide • 07/2021 www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
10 Photographing and Video
Recording
Saim SCT series thermal imager is equipped with a function for video
recording and photographing observed images onto the built-in
memory card. The files of images and videos will be named after the
time, so it is recommended to reset the system time in the Main Menu
– More - Time Setting or to synchronize the system time and date in
the Settings of the APP InfiRay Outdoor before using the camera and
video function. For specific operations.
Photographing
➢ Take a photo with a short press of the C (3) button in the home screen.
➢ A camera icon ( ) shows in the upper-right of the screen and the
image will freeze for 0.5s when the function performs.
Video recording
➢ Press and hold the C (3) button in the home screen to start the video
recording.
➢ A tooltip showing the recording time in MM: SS (minutes: seconds)
format will appear in the upper right corner of the display.
➢ The red dot in the tooltip flashes during recording.
➢ During recording, short press
the Down/Photo button (3) to
take a photo also.
➢ Press and hold the C (3)
button again to exit the
recording when done.
➢ Video and picture files are stored in the built-in memory card after video
recording has been turned off.
➢ (Note that the video will not be saved if you skip the process and shut
down the device suddenly instead).
➢ The photos and videos can be read on the computer via the USB cable.
Note
- You can enter and work on the menu during video recording.
- The recording time is accumulated in minutes until the recording stops,
that is, the time shows 60:00 after 59:59.
20. InfiRay Outdoor • Saim SCT Series • Quick Start Guide • 07/2021 www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
- The maximum duration of a video recording file is 10 minutes. When it’s
more than 10 minutes, the video will be recorded onto a new file.
- The number of files is limited by the capacity of the device's built-in
memory. Regularly monitor the amount of free memory in the built-in
memory card, transferring footage and photos to other media to free up
space on the memory card.
Memory Access
When the device is turned on and connected to a computer, it is
recognized by the computer as a flash memory card, which is used to
access the device's memory and make copies of pictures and videos.
➢ Turn on the device and connect it to the computer through the USB
cable.
➢ Double-click "my computer" on the desktop - double-click to open the
device named "Infiray" - then click and open the device
named "Internal Storage" to access
memory.
➢ There are different folders named by time in memory.
➢ Recorded videos and photographs are saved in these folders in the
format: IMG_HHMMSS_XXX. jpg (for photos) and
VID_HHMMSS_XXX.mp4 (for video). HHMMSS- hour/minute/ second;
XXX - three-digit common file counter (for photos and videos) which is
NOT reset.
11 Wi-Fi Function
The device is equipped with wireless communication with external
devices (computer, smartphone) via Wi-Fi.
➢ In the home screen, press and hold the M (4) button to enter the menu.
➢ Select the Wi-Fi option with the P (5) / C (3) button.
➢ Briefly press of the M (4) button to turn Wi-Fi on.
➢ The device is recognized by an external device under the label
‘Saim_xxxxx-xxxxxxʼ, xxxxx-xxxxxx is the SN code of the device.
➢ Enter the password on an external device, and establish a connection.
The initial password is 12345678.
➢ And then, the device can be controlled through the APP InfiRay
Outdoor.
21. InfiRay Outdoor • Saim SCT Series • Quick Start Guide • 07/2021 www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
Set Wi-Fi name and password
The Wi-Fi name and password of your device can be set in the APP.
➢ Click the "setting" icon in the APP to enter the setting interface.
➢ In the text box, enter and submit the name (SSID) and password of the
new Wi-Fi.
➢ It needs to restart the device to take the new name and password
effect.
12 Stadiametric Rangefinder
➢ In the home screen, press and
hold the P (5) + M (4) buttons at
the same time to enter the
stadiametric ranging interface,
and two horizontal lines will
appear on the upper and lower
positions of the cursor.
➢ Adjust the horizontal lines to the target position by the P (5) or C (3)
button.
➢ The icon on the left shows the approximate distance of the
corresponding target.
➢ Long press the M (4) button to exit to the stadiametric ranging interface.
13 PIP Function
➢ In the home screen, press and hold down the M (4) button to enter the
Main Menu.
➢ Select the PIP option with the P (5) / C (3) button.
➢ Briefly press of the M (4) button to turn PIP on/off.
➢ When the PIP function is on,
a small window will appear
on the top of the display.
➢ The image in the small
window is a 2x magnified
image centered by the reticle
center.
➢ When the main image is enlarged through the shortcut menu, the PIP
image will be enlarged 2×synchronously.
22. InfiRay Outdoor • Saim SCT Series • Quick Start Guide • 07/2021 www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
14 Specification
Model Saim SCT35 V2
Resolution, pixels 384×288
Pixel size, μm 12
NETD, mk ≤40
Frame rate, Hz 50
Objective lens, mm 35, F1.0
Field of view 7.5°×5.7°
Display 1024 ×768 OLED
Magnification, x 2.81 - 11.24
Battery type CR123 ×2
ZMax. Operation time, h 3.5
Wi-Fi & Recorder √
Compass & Motion sensor √
Weight (without batteries), g <420
Dimension, mm 195 ×61 ×61
Detective range, m
(Target size:1.7m*0.5m, P(n)=99%)
1818
Built-in memory, GB 32
USB type Type C