On 15 November 2016, the Global CCS Institute’s Americas office held the Clean energy solutions symposium: What is the Future of Carbon Capture? at the National Press Club, Washington, DC.
The Institute’s General Manager for the Americas, Jeff Erikson, launched The Global Status of CCS: 2016 report by presenting to the audience the highlights from the report and discussing the significant milestones achieved in the past year in the world of CCS. Erikson’s presentation was followed by an expert panel discussion on the future of clean energy, with focus on carbon capture and storage (CCS).
CarbonNet storage site characterisation and selection processGlobal CCS Institute
The CarbonNet Project has undertaken an extensive geoscience evaluation programme to identify, characterise and select prospective offshore storage sites in the nearshore Gippsland Basin, in south eastern Australia.
The process builds upon basin and regional assessments undertaken at the national level, and focuses upon leads and play fairs assessed using a vast amount of geological data available from 50 years of petroleum exploration and developments in the basin.
CarbonNet geoscience work has been subject to independent scientific peer reviews, and external assurance certification by Det Norske Veritas against the recommended practise for geological storage of carbon dioxide (CO2) J203.
CarbonNet now holds five greenhouse gas assessments permits providing exclusive rights to explore, appraisal and develop a portfolio of CO2 storage sites.
The project has identified a prioritised storage site capable of storing in excess of 125 Mt of CO2 for which a 'Declaration of Storage' has been prepared which demonstrates the 'fundamental determinants' and probability assessment of potential CO2 plume paths as required under Australian CCS legislation'.
This webinar will be presented by Dr Nick Hoffman, CarbonNet Geosequestration Advisor, and will provide an overview of CarbonNet geoscience evaluation programme, referencing the relevant knowledge share products available on the Global CCS Institute website.
Global Status of CCS: 2016. Saline Aquifer Storage Performance at the Quest C...Global CCS Institute
The Global CCS Institute launched The Global Status of CCS: 2016 at a dedicated event at the 22nd conference of the parties (COP 22) in Marrakech on Tuesday, 15 November.
The Global Status of CCS: 2016 report is an essential reference for industry, government, research bodies, and the broader community, providing a comprehensive overview of global and regional CCS developments.
Following the report launch, we will run a number of webinars commencing in November 2016, through to early 2017.
A Summary of the Global Status of CCS: 2016 will be accessible on our website from 15 November, and includes updates on key CCS facilities, including two major facilities now in operation:
Shell’s Quest Project in Canada
Tomakomai CCS Demonstration Project in Japan
These projects are significant 2016 milestones and testament to the safety, reliability and cost-effectiveness of CCS as an integral technology to meeting Paris Agreement climate change targets.
Please join us for the first of the Global Status of CCS: 2016 webinar series.
Saline Aquifer Storage Performance at the Quest CCS Project
As one of a handful of large-scale CCS projects currently injecting CO2 into a dedicated saline aquifer storage site, Shell’s Quest project offers a unique case study into the performance of dedicated storage. The Quest project injects CO2 into the Basal Cambrian Sandstone located 2 km below the surface. After the first year of operations, the Quest reservoir has exceeded internal expectations. While the original premise called for eight wells, today only two of three constructed injection wells take 100 per cent of project volumes (~140 tonnes /hr).
In this webinar, Simon O’Brien, Shell Quest Subsurface Manager, discussed storage performance at Quest after one year of operations as well as early results from the measurement, monitoring, and verification (MMV) plan.
Callide Oxyfuel Project - Jim Craigen - - Global CCS Institute – Nov 2011 Reg...Global CCS Institute
As a part of the Institute's strategic focus on assisting CCS projects through knowledge sharing, three North American roadshow events will help the industry share project experiences and knowledge about CCS. Taking place in the US and Canada, the three events include:
• Austin, Texas on November 8, 2011;
• Calgary, Canada on 10 November, 2011; and
• Washington, D.C. on 19 January, 2012.
The first roadshow focused on sharing project experiences and knowledge from the projects in North America but also brought in projects from Europe (Don valley) and Australia (Callide) so that regionally diverse experiences could be shared amongst a global audience.
Attendance at the event was around 30 to 35 which allowed open and frank discussions around technical, management, and regulatory issues and how these challenges can impact on a project’s advancement and decision making processes.
CarbonNet storage site characterisation and selection processGlobal CCS Institute
The CarbonNet Project has undertaken an extensive geoscience evaluation programme to identify, characterise and select prospective offshore storage sites in the nearshore Gippsland Basin, in south eastern Australia.
The process builds upon basin and regional assessments undertaken at the national level, and focuses upon leads and play fairs assessed using a vast amount of geological data available from 50 years of petroleum exploration and developments in the basin.
CarbonNet geoscience work has been subject to independent scientific peer reviews, and external assurance certification by Det Norske Veritas against the recommended practise for geological storage of carbon dioxide (CO2) J203.
CarbonNet now holds five greenhouse gas assessments permits providing exclusive rights to explore, appraisal and develop a portfolio of CO2 storage sites.
The project has identified a prioritised storage site capable of storing in excess of 125 Mt of CO2 for which a 'Declaration of Storage' has been prepared which demonstrates the 'fundamental determinants' and probability assessment of potential CO2 plume paths as required under Australian CCS legislation'.
This webinar will be presented by Dr Nick Hoffman, CarbonNet Geosequestration Advisor, and will provide an overview of CarbonNet geoscience evaluation programme, referencing the relevant knowledge share products available on the Global CCS Institute website.
Global Status of CCS: 2016. Saline Aquifer Storage Performance at the Quest C...Global CCS Institute
The Global CCS Institute launched The Global Status of CCS: 2016 at a dedicated event at the 22nd conference of the parties (COP 22) in Marrakech on Tuesday, 15 November.
The Global Status of CCS: 2016 report is an essential reference for industry, government, research bodies, and the broader community, providing a comprehensive overview of global and regional CCS developments.
Following the report launch, we will run a number of webinars commencing in November 2016, through to early 2017.
A Summary of the Global Status of CCS: 2016 will be accessible on our website from 15 November, and includes updates on key CCS facilities, including two major facilities now in operation:
Shell’s Quest Project in Canada
Tomakomai CCS Demonstration Project in Japan
These projects are significant 2016 milestones and testament to the safety, reliability and cost-effectiveness of CCS as an integral technology to meeting Paris Agreement climate change targets.
Please join us for the first of the Global Status of CCS: 2016 webinar series.
Saline Aquifer Storage Performance at the Quest CCS Project
As one of a handful of large-scale CCS projects currently injecting CO2 into a dedicated saline aquifer storage site, Shell’s Quest project offers a unique case study into the performance of dedicated storage. The Quest project injects CO2 into the Basal Cambrian Sandstone located 2 km below the surface. After the first year of operations, the Quest reservoir has exceeded internal expectations. While the original premise called for eight wells, today only two of three constructed injection wells take 100 per cent of project volumes (~140 tonnes /hr).
In this webinar, Simon O’Brien, Shell Quest Subsurface Manager, discussed storage performance at Quest after one year of operations as well as early results from the measurement, monitoring, and verification (MMV) plan.
Callide Oxyfuel Project - Jim Craigen - - Global CCS Institute – Nov 2011 Reg...Global CCS Institute
As a part of the Institute's strategic focus on assisting CCS projects through knowledge sharing, three North American roadshow events will help the industry share project experiences and knowledge about CCS. Taking place in the US and Canada, the three events include:
• Austin, Texas on November 8, 2011;
• Calgary, Canada on 10 November, 2011; and
• Washington, D.C. on 19 January, 2012.
The first roadshow focused on sharing project experiences and knowledge from the projects in North America but also brought in projects from Europe (Don valley) and Australia (Callide) so that regionally diverse experiences could be shared amongst a global audience.
Attendance at the event was around 30 to 35 which allowed open and frank discussions around technical, management, and regulatory issues and how these challenges can impact on a project’s advancement and decision making processes.
Slide deck used during the SPE Live broadcast on 19 August 2020 with guest Doug Peacock, 2010-11 SPE Distinguished Lecturer and currently a Technical Director for GaffneyCline.
WATCH VIDEO: https://youtu.be/ykJhFkNUXqc
TRAINING COURSE: http://go.spe.org/peacockSPELIVE
The unitization process has evolved over the years and is now well established throughout the world with many countries having legislation for unitization.
Although there are generic agreements, each unitization agreement is unique and requires a wide range of issues to be considered.
On 16 May 2013, the Global CCS Institute hosted its seventh study meeting in Tokyo. This presentation is by Holger Bietz, the Institute's General Manager, Projects, Financial and Commercial.
Increasing interest by governments worldwide on reducing CO2 released into the atmosphere form a nexus of of opportunity with enhanced oil recovery which could benefit mature oil fields in nearly every country. Overall approximately two-thirds of original oil in place (OOIP) in mature conventional oil fields remains after primary or primary/secondary recovery efforts have taken place. CO2 enhanced oil recovery (CO2 EOR) has an excellent record of revitalizing these mature plays and can dramatically increase ultimate recovery. Since the first CO2 EOR project was initiated in 1972, more than 154 additional projects have been put into operation around the world and about two-thirds are located in the Permian basin and Gulf coast regions of the United States. While these regions have favorable geologic and reservoir conditions for CO2 EOR, they are also located near large natural sources of CO2.
In recent years an increasing number of projects have been developed in areas without natural supplies, and have instead utilized captured CO2 from a variety of anthropogenic sources including gas processing plants, ethanol plants, cement plants, and fertilizer plants. Today approximately 36% of active CO2 EOR projects utilize gas that would otherwise be vented to the atmosphere. Interest world-wide has increased, including projects in Canada, Brazil, Norway, Turkey, Trinidad, and more recently, and perhaps most significantly, in Saudi Arabia and Qatar. About 80% of all energy used in the world comes from fossil fuels, and many industrial and manufacturing processes generate CO2 that can be captured and used for EOR. In this 30 minute presentation a brief history of CO2 EOR is provided, implications for utilizing captured carbon are discussed, and a demonstration project is introduced with an overview of characterization, modeling, simulation, and monitoring actvities taking place during injection of more than a million metric tons (~19 Bcf) of anthropogenic CO2 into a mature waterflood.
Longer versions of the presentation can be requested and can cover details of geologic and seimic characterization, simulation studies, time-lapse monitoring, tracer studies, or other CO2 monitoring technologies.
Carbon Dioxide Properties and the Role of Impurities in the Subsurface - presentation by Martin Trusler in the Effects of Impurities on CO2 Properties session at the UKCCSRC Cardiff Biannual Meeting, 10-11 September 2014
Retreating ice uncovers major discovery potential for CRD-Porphyry system at ...Stephan Bogner
Core Assets Corp. in Discovery Mode: Assays Pending / Exciting times for shareholders of Core Assets Corp. as the stock has been performing strongly over the past few weeks, rising from an intraday-low of $0.065 in mid-August to an intraday-high of $0.33 last week. The company recently announced to have completed its phase-2 exploration program at its Blue Property at the northern edge of the Golden Triangle in British Columbia, Canada. Today, Core Assets announced a major property expansion.
Update on CCS Activities in Canada and Possible Topics for European Collaboration, Kathryn Gagnon (Policy Advisor, Natural Resources Canada) UK/Norway/Canada Meeting 18/19 March 2015
What are my 3P Reserves? Haas Petroleum Engineering Serviceshaasengineering
What is the best way to estimate your 3P reserves? President of Haas Petroleum Engineering Services Thad Toups gave this presentation on Haas' internal analytics and auditing methodology.
The Asia CCUS Network has been successfully launched on 22-23 June 2021 with initially 13 countries (all ASEAN member countries, the United States, Australia, and Japan) and more than 100 international organisations, companies, financial and research institutions that share the vision of CCUS development throughout the Asian region.
The Network members have expressed their intention to participate to share the vision of the Asia CCUS Network that aims to contribute to the decarbonisation of emissions in Asia through collaboration and cooperation on development and deployment of CCUS.
The Asia CCUS Network provides opportunities for countries in the region to work and collaborate on the low emission technology partnership that will eventually help to build countries’ capability to lower the cost of CCUS technology and its deployment through the collaboration of research and innovation.
At the 2nd Asia CCUS Network (ACN) Knowledge Sharing Conference, the Asia CCUS Network is very pleased to invite experts from the Department of Energy, United States of America (USDOE) to share their insights and experiences about CCUS development and policy to support the deployment of CCUS technology.
The ACN will be an active forum to bridge the knowledge gap on CCUS technologies, policy development to support the development and deployment of CCUS in Asia. Thus, this conference hosted in collaboration with IEA will help to bring in update knowledge, opportunity for investment in CCUS in Asia.
Title: Evaluation of Multistage Hydraulic Fracturing Techniques for Production Optimization in Naturally Fractured Reservoirs Using Coupled Geomechanics Fracture and Flow Model
Webinar: The Global Status of CCS: 2014 - Overcoming challenges in EuropeGlobal CCS Institute
The Global CCS Institute was pleased to announce the release of our annual Global Status of CCS: 2014 report, and invite you to join the Institute’s Europe, Middle East and Africa Team for a webinar summarising the main themes of the report.
The Institute’s General Manager for the region, Andrew Purvis, presented a summary of the report, and was then joined by a number of our subject matter experts to discuss issues raised during the presentation by our global and regional audience.
Chairman: John Scowcroft, Executive Adviser/ UNFCCC Specialist
Presentation: Andrew Purvis, General Manager
Expert Panel:
Kirsty Anderson: Public Engagement
Silvia Vaghi: Policy and Regulation
Guido Magneschi: Capture
Chris Consoli: Storage
The report provides a detailed overview of the current status of CCS projects worldwide and provides a comprehensive overview of global and regional developments in CCS technologies and the policies, laws and regulations that must drive the demonstration and deployment of technologies to support global climate mitigation efforts.
Providing a number of key recommendations for decision makers, The Global Status of CCS: 2014 report is an important reference guide for industry, government, research bodies and the broader community.
Slide deck used during the SPE Live broadcast on 19 August 2020 with guest Doug Peacock, 2010-11 SPE Distinguished Lecturer and currently a Technical Director for GaffneyCline.
WATCH VIDEO: https://youtu.be/ykJhFkNUXqc
TRAINING COURSE: http://go.spe.org/peacockSPELIVE
The unitization process has evolved over the years and is now well established throughout the world with many countries having legislation for unitization.
Although there are generic agreements, each unitization agreement is unique and requires a wide range of issues to be considered.
On 16 May 2013, the Global CCS Institute hosted its seventh study meeting in Tokyo. This presentation is by Holger Bietz, the Institute's General Manager, Projects, Financial and Commercial.
Increasing interest by governments worldwide on reducing CO2 released into the atmosphere form a nexus of of opportunity with enhanced oil recovery which could benefit mature oil fields in nearly every country. Overall approximately two-thirds of original oil in place (OOIP) in mature conventional oil fields remains after primary or primary/secondary recovery efforts have taken place. CO2 enhanced oil recovery (CO2 EOR) has an excellent record of revitalizing these mature plays and can dramatically increase ultimate recovery. Since the first CO2 EOR project was initiated in 1972, more than 154 additional projects have been put into operation around the world and about two-thirds are located in the Permian basin and Gulf coast regions of the United States. While these regions have favorable geologic and reservoir conditions for CO2 EOR, they are also located near large natural sources of CO2.
In recent years an increasing number of projects have been developed in areas without natural supplies, and have instead utilized captured CO2 from a variety of anthropogenic sources including gas processing plants, ethanol plants, cement plants, and fertilizer plants. Today approximately 36% of active CO2 EOR projects utilize gas that would otherwise be vented to the atmosphere. Interest world-wide has increased, including projects in Canada, Brazil, Norway, Turkey, Trinidad, and more recently, and perhaps most significantly, in Saudi Arabia and Qatar. About 80% of all energy used in the world comes from fossil fuels, and many industrial and manufacturing processes generate CO2 that can be captured and used for EOR. In this 30 minute presentation a brief history of CO2 EOR is provided, implications for utilizing captured carbon are discussed, and a demonstration project is introduced with an overview of characterization, modeling, simulation, and monitoring actvities taking place during injection of more than a million metric tons (~19 Bcf) of anthropogenic CO2 into a mature waterflood.
Longer versions of the presentation can be requested and can cover details of geologic and seimic characterization, simulation studies, time-lapse monitoring, tracer studies, or other CO2 monitoring technologies.
Carbon Dioxide Properties and the Role of Impurities in the Subsurface - presentation by Martin Trusler in the Effects of Impurities on CO2 Properties session at the UKCCSRC Cardiff Biannual Meeting, 10-11 September 2014
Retreating ice uncovers major discovery potential for CRD-Porphyry system at ...Stephan Bogner
Core Assets Corp. in Discovery Mode: Assays Pending / Exciting times for shareholders of Core Assets Corp. as the stock has been performing strongly over the past few weeks, rising from an intraday-low of $0.065 in mid-August to an intraday-high of $0.33 last week. The company recently announced to have completed its phase-2 exploration program at its Blue Property at the northern edge of the Golden Triangle in British Columbia, Canada. Today, Core Assets announced a major property expansion.
Update on CCS Activities in Canada and Possible Topics for European Collaboration, Kathryn Gagnon (Policy Advisor, Natural Resources Canada) UK/Norway/Canada Meeting 18/19 March 2015
What are my 3P Reserves? Haas Petroleum Engineering Serviceshaasengineering
What is the best way to estimate your 3P reserves? President of Haas Petroleum Engineering Services Thad Toups gave this presentation on Haas' internal analytics and auditing methodology.
The Asia CCUS Network has been successfully launched on 22-23 June 2021 with initially 13 countries (all ASEAN member countries, the United States, Australia, and Japan) and more than 100 international organisations, companies, financial and research institutions that share the vision of CCUS development throughout the Asian region.
The Network members have expressed their intention to participate to share the vision of the Asia CCUS Network that aims to contribute to the decarbonisation of emissions in Asia through collaboration and cooperation on development and deployment of CCUS.
The Asia CCUS Network provides opportunities for countries in the region to work and collaborate on the low emission technology partnership that will eventually help to build countries’ capability to lower the cost of CCUS technology and its deployment through the collaboration of research and innovation.
At the 2nd Asia CCUS Network (ACN) Knowledge Sharing Conference, the Asia CCUS Network is very pleased to invite experts from the Department of Energy, United States of America (USDOE) to share their insights and experiences about CCUS development and policy to support the deployment of CCUS technology.
The ACN will be an active forum to bridge the knowledge gap on CCUS technologies, policy development to support the development and deployment of CCUS in Asia. Thus, this conference hosted in collaboration with IEA will help to bring in update knowledge, opportunity for investment in CCUS in Asia.
Title: Evaluation of Multistage Hydraulic Fracturing Techniques for Production Optimization in Naturally Fractured Reservoirs Using Coupled Geomechanics Fracture and Flow Model
Webinar: The Global Status of CCS: 2014 - Overcoming challenges in EuropeGlobal CCS Institute
The Global CCS Institute was pleased to announce the release of our annual Global Status of CCS: 2014 report, and invite you to join the Institute’s Europe, Middle East and Africa Team for a webinar summarising the main themes of the report.
The Institute’s General Manager for the region, Andrew Purvis, presented a summary of the report, and was then joined by a number of our subject matter experts to discuss issues raised during the presentation by our global and regional audience.
Chairman: John Scowcroft, Executive Adviser/ UNFCCC Specialist
Presentation: Andrew Purvis, General Manager
Expert Panel:
Kirsty Anderson: Public Engagement
Silvia Vaghi: Policy and Regulation
Guido Magneschi: Capture
Chris Consoli: Storage
The report provides a detailed overview of the current status of CCS projects worldwide and provides a comprehensive overview of global and regional developments in CCS technologies and the policies, laws and regulations that must drive the demonstration and deployment of technologies to support global climate mitigation efforts.
Providing a number of key recommendations for decision makers, The Global Status of CCS: 2014 report is an important reference guide for industry, government, research bodies and the broader community.
David Freed (8 Rivers Capital), ELEEP Virtual Discussion on NET PowerELEEP Network
This presentation was given during an ELEEP Virtual Discussion with David Freed on NET Power on July 12, 2016. A video recording of the event is available on the ELEEP Network YouTube Channel - https://www.youtube.com/watch?v=Gl1AoXwEgM8
Webinar: Global Status of CCS: 2014 - Driving development in the Asia Pacific Global CCS Institute
The Global CCS Institute launched The Global Status of CCS: 2014 report on 5 November 2014.
2014 has been a pivotal year for CCS as it is now a reality in the power industry. The Global Status of CCS: 2014 report provides a comprehensive overview of global and regional developments in CCS technologies and the policies, laws and regulations that must drive the demonstration and deployment of technologies to support global climate mitigation efforts.
Clare Penrose, the Institute's General Manager - Asia Pacific presented a summary of the report and discuss the key recommendations, an important reference for decision makers for the year ahead.
Ms Penrose was joined by the Institute’s subject matter experts who were available to answer questions:
Chris Consoli: CO2 Storage
Ian Havercroft: CCS Laws and Regulations
Lawrence Irlam: CCS Policy and Economics
Jessica Morton: CCS Public Engagement
Tony Zhang: CO2 Capture
This third webinar in the series 'CCS in Developing Countries' was presented by the World Bank.
Deploying CCS in developing countries is critically important. The International Energy Agency estimates that to achieve global emissions reduction targets 70% of CCS projects will be in non-OECD countries by 2050.
CCS faces a number of challenges, in all countries, but particularly in developing countries. This webinar discussed some of these challenges and barriers using South Africa as a case study. South Africa is working towards a Test Injection Project and subsequently a Carbon Capture and Sequestration Project. The World Bank considered it important to understand a set of constraints, including regulatory, technical, economic, human capacity, etc. to realization of CCS demonstration and commercialization, and how the CCS development will look like in the South African context, out to 2050. A techno-economic assessment has been undertaken to gain this understanding.
The techno-economic assessment explored CCS deployment in six relevant industries in South Africa, and assessed projected scenarios associated with key issues of interest (such as cost, impact on electricity prices, timeframes etc). The key output from the techno-economic study was a techno-economic model, supported by the data sets, specifically for South Africa. The potential storage site capacity has been analysed to provide a strong indication of the likely storage capacity available within physical and economic constraints.
On 28 October UKCCSRC Director Jon Gibbins and ECR member Rudra Kapila spoke at a meeting with the University of Edinburgh 'Engineers Without Borders' group. This focused on CCS applications in developing countries, where Rudra's practical experience of CCS engagement in India and wider climate negotiations was particularly relevant. While CCS was a somewhat unusual topic for EWB the shared concerns about dangerous climate change made for a very interesting discussion.
Barry Jones, General Manager - Asia Pacific for the Global CCS Institute, provides an overview of carbon capture and storage technology including its rationale and a summary of current projects. The presentation also examines impediments to its deployment and recommendations for how to overcome them.
The role of CCS/CCUS in the Climate Action Plan - Dr S. Julio FriedmannGlobal CCS Institute
The role of CCS/CCUS in the Climate Action Plan
Global CCS Institute, delivered at the Global CCS Institute's Third Americas Forum
Feb. 27th, 2014, Washington, DC
Northern Lights: A European CO2 transport and storage project Global CCS Institute
The Global CCS Institute hosted the final webinar of its "Telling the Norwegian CCS Story" series which presented Northern Lights. This project is part of the Norwegian full-scale CCS project which will include the capture of CO2 at two industrial facilities (cement and waste-to-energy plants), transport and permanent storage of CO2 in a geological reservoir on the Norwegian Continental Shelf.
Northern Lights aims to establish an open access CO2 transport and storage service for Europe. It is the first integrated commercial project of its kind able to receive CO2 from a variety of industrial sources. The project is led by Equinor with two partners Shell and Total. Northern Lights aims to drive the development of CCS in Europe and globally.
Webinar: Policy priorities to incentivise large scale deployment of CCSGlobal CCS Institute
The Global CCS Institute released a new report highlighting strategic policy priorities for the large-scale deployment of carbon capture and storage (CCS). The Institute’s report also reviews the progress achieved until now with existing policies and the reasons behind positive investment decisions for the current 23 large-scale CCS projects in operation and construction globally.
Telling the Norwegian CCS Story | PART II: CCS: the path to a sustainable and...Global CCS Institute
The Global CCS Institute in collaboration with Gassnova hosted the second webinar of its "Telling the Norwegian CCS Story" series.
The second webinar presented Norcem's CCS project at their cement production facility in Brevik, in the South-Eastern part of Norway.
Telling the Norwegian CCS Story | PART I: CCS: the path to sustainable and em...Global CCS Institute
In 2018, the Norwegian government announced its decision to continue the planning of a demonstration project for CO2 capture, transport and storage. This webinar focuses on the Fortum Oslo Varme CCS project. This is one of the two industrial CO2 sources in the Norwegian full-scale project.
At their waste-to-energy plant at Klemetsrud in Oslo, Fortum Oslo Varme produces electricity and district heating for the Oslo region by incinerating waste. Its waste-to-energy plant is one of the largest land-based sources of CO2 emissions in Norway, counting for about 20 % of the city of Oslo’s total emissions. The CCS project in Oslo is an important step towards a sustainable waste system and the creation of a circular economy. It will be the first energy recovery installation for waste disposal treatment with full-scale CCS.
Fortum Oslo Varme has understood the enormous potential for the development of a CCS industry in the waste-to-energy industry. The company is working to capture 90 % of its CO2 emissions, the equivalent of 400 000 tons of CO2 per year. This project will open new opportunities to reduce emissions from the waste sector in Norway and globally. Carbon capture from waste incineration can remove over 90 million tons of CO2 per year from existing plants in Europe. There is high global transfer value and high interest in the industry for the project in Oslo.
The waste treated consists of almost 60 % biological carbon. Carbon capture at waste-to-energy plants will therefore be so-called BIO-CCS (i.e. CCS from the incineration of organic waste, thereby removing the CO2 from the natural cycle).
Find out more about the project by listening to our webinar.
Decarbonizing Industry Using Carbon Capture: Norway Full Chain CCSGlobal CCS Institute
Industrial sectors such as steel, cement, iron, and chemicals production are responsible for over 20 percent of global carbon dioxide (CO2) emissions. To be on track to meet greenhouse gas emissions reduction targets established as part of the Paris Climate Accord, all sectors must find solutions to rapidly decarbonize, and carbon capture and storage (CCS) technology is the only path for energy-intensive industries.
This webinar will explore how one country, Norway, is working to realize a large-scale Full Chain CCS project, where it is planning to apply carbon capture technology to several industrial facilities. This unique project explores capturing CO2 from three different industrial facilities - an ammonia production plant, a waste-to-energy plant, and a cement production facility. Captured CO2 will be then transported by ship to a permanent off-shore storage site operated as part of a collaboration between Statoil, Total, and Shell. When operational, Norway Full Chain CCS will capture and permanently store up to 1.5 million tons of CO2 per year.
During this webinar, Michael Carpenter, Senior Adviser at Gassnova, will provide an overview of the Norway Full Chain CCS, and discuss the value that Norway aims to derive from it. The key stakeholders working on this exciting project, and how they cooperate, will be also discussed. Gassnova is a Norwegian state enterprise focusing on CCS technology, which manages the Norway Full Chain CCS project.
Cutting Cost of CO2 Capture in Process Industry (CO2stCap) Project overview &...Global CCS Institute
The CO2StCap project is a four year initiative carried out by industry and academic partners with the aim of reducing capture costs from CO2 intensive industries (more info here). The project, led by Tel-Tek, is based on the idea that cost reduction is possible by capturing only a share of the CO2emissions from a given facility, instead of striving for maximized capture rates. This can be done in multiple ways, for instance by capturing only from the largest CO2 sources at individual multi-stack sites utilising cheap waste heat or adapting the capture volumes to seasonal changes in operations.
The main focus of this research is to perform techno-economic analyses for multiple partial CO2 capture concepts in order to identify economic optimums between cost and volumes captured. In total for four different case studies are developed for cement, iron & steel, pulp & paper and ferroalloys industries.
The first part of the webinar gave an overview of the project with insights into the cost estimation method used. The second part presented the iron & steel industry case study based on the Lulea site in Sweden, for which waste-heat mapping methodology has been used to assess the potential for partial capture via MEA-absorption. Capture costs for different CO2 sources were compared and discussed, demonstrating the viability of partial capture in an integrated steelworks.
Webinar presenters included Ragnhild Skagestad, senior researcher at Tel-Tek; Maximilian Biermann, PhD student at Division of Energy Technology, Chalmers University of Technology and Maria Sundqvist, research engineer at the department of process integration at Swerea MEFOS.
The Global CCS Institute and USEA co-hosted a briefing on the importance of R&D in advancing energy technologies on June 29 2017. This is the presentation given by Ron Munson, Global Lead-Capture at the Global CCS Institute.
The Global CCS Institute and USEA co-hosted a briefing on the importance of R&D in advancing energy technologies on June 29 2017. This is the presentation given by Alfred “Buz” Brown, Founder, CEO and Chairman of ION Engineering.
The Global CCS Institute and USEA co-hosted a briefing on the importance of R&D in advancing energy technologies on June 29 2017. This is the presentation given by Tim Merkel, Director, Research and Development Group at Membrane Technology & Research (MTR)
Mission Innovation aims to reinvigorate and accelerate global clean energy innovation with the objective to make clean energy widely affordable. Through a series of Innovation Challenges, member countries have pledged to support actions aimed at accelerating research, development, and demonstration (RD&D) in technology areas where MI members believe increased international attention would make a significant impact in our shared fight against climate change. The Innovation Challenges cover the entire spectrum of RD&D; from early stage research needs assessments to technology demonstration projects.
The Carbon Capture Innovation challenge aims to explore early stage research opportunities in the areas of Carbon Capture, Carbon Utilization, and Carbon Storage. The goal of the Carbon Capture Innovation Challenge is twofold: first, to identify and prioritize breakthrough technologies; and second, to recommend research, development, and demonstration (RD&D) pathways and collaboration mechanisms.
During the webinar, Dr Tidjani Niass, Saudi Aramco, and Jordan Kislear, US Department of Energy, provided an overview of progress to date. They also highlighted detail opportunities for business and investor engagement, and discuss future plans for the Innovation Challenge.
Karl Hausker, PhD, Senior Fellow, Climate Program, World Resources Institute, is the leader of the analytic and writing team for the latest study by the Risky Business Project: From Risk to Return: Investing in a Clean Energy Economy. Co-Chairs Michael Bloomberg, Henry Paulson, Jr, and Thomas Steyer tasked the World Resources Institute with this independent assessment of technically and economically feasible pathways that the US could follow to achieve an 80% reduction in CO2 emissions by 2050. These pathways involve mixtures of: energy efficiency, renewable energy, nuclear power, carbon capture and storage, increased carbon sequestration in US lands, and reductions in non-CO2 emissions. These pathways rely on commercial or near-commercial technologies that American companies are adopting and developing.
Dr Hausker presented the results of the study and draw some comparisons to the US Mid Century Strategy report submitted to the UNFCCC. He has worked for 30 years in the fields of climate change, energy, and environment in a career that has spanned legislative and executive branches, research institutions, NGOs, and consulting.
This webinar offered a unique opportunity to learn more about various decarbonization scenarios and to address your questions directly to Dr Hausker.
Webinar Series: Carbon Sequestration Leadership Forum Part 1. CCUS in the Uni...Global CCS Institute
The Carbon Sequestration Leadership Forum (CSLF) is a Ministerial-level international climate change initiative that is focused on the development of improved cost-effective technologies for carbon capture and storage (CCS). As part of our commitment to raising awareness of CCS policies and technology, CSLF, with support from the Global CCS Institute, is running a series of webinars showcasing academics and researchers that are working on some of the most interesting CCS projects and developments from around the globe.
This first webinar comes to you from Abu Dhabi – the site of the Mid-Year CSLF Meeting and home of the Al Reyadah Carbon Capture, Utilization & Storage (CCUS) Project. The United Arab Emirates (UAE) is one of the world’s major oil exporters, with some of the highest levels of CO2 emissions per capita. These factors alone make this a very interesting region for the deployment of CCUS both as an option for reducing CO2 emissions, but also linking these operations for the purposes of enhanced oil recovery (EOR) operations.
In the UAE, CCUS has attracted leading academic institutes and technology developers to work on developing advanced technologies for reducing CO2 emissions. On Wednesday, 26th April, we had the opportunity to join the Masdar Institute’s Associate Professor of Chemical Engineering, Mohammad Abu Zahra to learn about the current status and potential for CCUS in the UAE.
Mohammad presented an overview of the current large scale CCUS demonstration project in the UAE, followed by a presentation and discussion of the ongoing research and development activities at the Masdar Institute.
This webinar offered a rare opportunity to put your questions directly to this experienced researcher and learn more about the fascinating advances being made at the Masdar Institute.
Energy Security and Prosperity in Australia: A roadmap for carbon capture and...Global CCS Institute
On 15 February, a Roadmap titled for Energy Security and Prosperity in Australia: A roadmap for carbon capture and storage was released. The ACCS Roadmap contains analysis and recommendations for policy makers and industry on much needed efforts to ensure CCS deployment in Australia.
This presentation focused on the critical role CCS can play in Australia’s economic prosperity and energy security. To remain within its carbon budget, Australia must accelerate the deployment of CCS. Couple with this, only CCS can ensure energy security for the power sector and high-emissions industries whilst maintain the the vital role the energy sector plays in the Australian economy.
The webinar also detailed what is required to get Australia ready for widespread commercial deployment of CCS through specific set of phases, known as horizons in strategic areas including storage characterisation, legal and regulatory frameworks and public engagement and awareness.
The Roadmap serves as an important focal point for stakeholders advocating for CCS in Australia, and will provide a platform for further work feeding into the Australian Government’s review of climate policy in 2017 and beyond.
It is authored by the University of Queensland and Gamma Energy Technology, and was overseen by a steering committee comprising the Commonwealth Government, NSW Government, CSIRO, CO2CRC Limited, ACALET - COAL21 Fund and ANLEC R&D.
This webinar was presented by Professor Chris Greig, from The University of Queensland.
Webinar Series: Public engagement, education and outreach for CCS. Part 5: So...Global CCS Institute
The fifth webinar in the public engagement, education and outreach for CCS Series will explore the critically important subject of social site characterisation with the very researchers who named the process.
We were delighted to be able to reunite CCS engagement experts Sarah Wade and Sallie Greenberg, Ph.D. to revisit their 2011 research and guidance: ‘Social Site Characterisation: From Concept to Application’. When published, this research and toolkit helped early CCS projects worldwide to raise the bar on their existing engagement practices. For this webinar, we tasked these early thought leaders with reminding us of the importance of this research and considering the past recommendations in today’s context. Sarah and Sallie tackled the following commonly asked questions:
What exactly is meant by social site characterisation?
Why it is important?
What would they consider best practice for getting to understand the social intricacies and impacts of a CCS project site?
This entire Webinar Series has been designed to share leading research and best practice and consider these learnings as applied to real project examples. So for this fifth Webinar, we were really pleased to be joined by Ruth Klinkhammer, Senior Manager, Communications and Engagement at CMC Research Institutes. Ruth agreed to share some of her experiences and challenges of putting social site characterisation into practice onsite at some of CMC’s larger research projects.
This Webinar combined elements of public engagement research with real world application and discussion, explore important learnings and conclude with links to further resources for those wishing to learn more. This a must for anyone working in or studying carbon capture and storage or other CO2 abatement technologies. If you have ever nodded along at a conference where the importance of understanding stakeholders is acknowledged, but then stopped to wonder – what might that look like in practice? This Webinar is for you.
Managing carbon geological storage and natural resources in sedimentary basinsGlobal CCS Institute
To highlight the research and achievements of Australian researchers, the Global CCS Institute, together with Australian National Low Emissions Coal Research and Development (ANLEC R&D), will hold a series of webinars throughout 2017. Each webinar will highlight a specific ANLEC R&D research project and the relevant report found on the Institute’s website.
This is the eighth webinar of the series and will present on basin resource management and carbon storage. With the ongoing deployment of CCS facilities globally, the pore space - the voids in the rock deep in sedimentary basins – are now a commercial resource. This is a relatively new concept with only a few industries utilising that pore space to date.
This webinar presented a framework for the management of basin resources including carbon storage. Prospective sites for geological storage of carbon dioxide target largely sedimentary basins since these provide the most suitable geological settings for safe, long-term storage of greenhouse gases. Sedimentary basins can host different natural resources that may occur in isolated pockets, across widely dispersed regions, in multiple locations, within a single layer of strata or at various depths.
In Australia, the primary basin resources are groundwater, oil and gas, unconventional gas, coal and geothermal energy. Understanding the nature of how these resources are distributed in the subsurface is fundamental to managing basin resource development and carbon dioxide storage. Natural resources can overlap laterally or with depth and have been developed successfully for decades. Geological storage of carbon dioxide is another basin resource that must be considered in developing a basin-scale resource management system to ensure that multiple uses of the subsurface can sustainably and pragmatically co-exist.
This webinar was presented by Karsten Michael, Research Team Leader, CSIRO Energy.
Mercury and other trace metals in the gas from an oxy-combustion demonstratio...Global CCS Institute
To highlight the research and achievements of Australian researchers, the Global CCS Institute together with ANLEC R&D will hold a series of webinars throughout 2017. Each webinar will highlight a specific ANLEC R&D research project and the relevant report found on the Institute’s website. This is the seventh webinar of the series and presented the results of a test program on the retrofitted Callide A power plant in Central Queensland.
The behaviour of trace metals and the related characteristics of the formation of fine particles may have important implications for process options, gas cleaning, environmental risk and resultant cost in oxy-fuel combustion. Environmental and operational risk will be determined by a range of inter-related factors including:
The concentrations of trace metals in the gas produced from the overall process;
Capture efficiencies of the trace species in the various air pollution control devices used in the process; including gas and particulate control devices, and specialised systems for the removal of specific species such as mercury;
Gas quality required to avoid operational issues such as corrosion, and to enable sequestration in a variety of storage media without creating unacceptable environmental risks; the required quality for CO2 transport will be defined by (future and awaited) regulation but may be at the standards currently required of food or beverage grade CO2; and
Speciation of some trace elements
Macquarie University was engaged by the Australian National Low Emissions Coal Research and Development Ltd (ANLEC R&D) to investigate the behaviour of trace elements during oxy-firing and CO2 capture and processing in a test program on the retrofitted Callide A power plant, with capability for both oxy and air-firing. Gaseous and particulate sampling was undertaken in the process exhaust gas stream after fabric filtration at the stack and at various stages of the CO2 compression and purification process. These measurements have provided detailed information on trace components of oxy-fired combustion gases and comparative measurements under air fired conditions. The field trials were supported by laboratory work where combustion took place in a drop tube furnace and modelling of mercury partitioning using the iPOG model.
The results obtained suggest that oxy-firing does not pose significantly higher environmental or operational risks than conventional air-firing. The levels of trace metals in the “purified” CO2 gas stream should not pose operational issues within the CO2 Processing Unit (CPU).
This webinar was presented by Peter Nelson, Professor of Environmental Studies, and Anthony Morrison, Senior Research Fellow, from the Department of Environmental Sciences, Macquarie University.
Webinar Series: Public engagement, education and outreach for CCS. Part 4: Is...Global CCS Institute
Teesside Collective has been developing a financial support mechanism to kickstart an Industrial Carbon Capture and Storage (CCS) network in the UK. This project would transform the Teesside economy, which could act as a pilot area in the UK as part of the Government’s Industrial Strategy.
The final report– produced by Pöyry Management Consulting in partnership with Teesside Collective – outlines how near-term investment in CCS can be a cost-effective, attractive proposition for both Government and energy-intensive industry.
The report was published on Teesside Collective’s website on 7 February. You will be able to view copies of the report in advance of the webinar.
We were delighted to welcome Sarah Tennison from Tees Valley Combined Authority back onto the webinar programme. Sarah was joined by Phil Hare and Stuart Murray from Pöyry Management Consulting, to take us through the detail of the model and business case for Industrial CCS.
This webinar offered a rare opportunity to speak directly with these project developers and understand more about their proposed financial support mechanism.
Laboratory-scale geochemical and geomechanical testing of near wellbore CO2 i...Global CCS Institute
To highlight the research and achievements of Australian researchers, the Global CCS Institute together with ANLEC R&D will hold a series of webinars throughout 2016 and 2017. Each webinar will highlight a specific ANLEC R&D research project and the relevant report found on the Institute’s website. This is the sixth webinar of the series and presented the results of chemical and mechanical changes that carbon dioxide (CO2) may have at a prospective storage complex in the Surat Basin, Queensland, Australia.
Earth Sciences and Chemical Engineering researchers at the University of Queensland have been investigating the effects of supercritical CO2 injection on reservoir properties in the near wellbore region as a result of geochemical reactions since 2011. The near wellbore area is critical for CO2 injection into deep geological formations as most of the resistance to flow occurs in this region. Any changes to the permeability can have significant economic impact in terms of well utilisation efficiency and compression costs. In the far field, away from the well, the affected reservoir is much larger and changes to permeability through blocking or enhancement have relatively low impact.
This webinar was presented by Prof Sue Golding and Dr Grant Dawson and will provide an overview of the findings of the research to assist understanding of the beneficial effects and commercial consequences of near wellbore injectivity enhancement as a result of geochemical reactions.
Webinar Series: Public engagement, education and outreach for CCS. Part 3: Ca...Global CCS Institute
The third webinar in the public engagement, education and outreach for CCS Series digged deeper, perhaps multiple kilometres deeper, to explore successful methods for engaging the public on the often misunderstood topic of carbon (CO2) storage.
Forget bad experiences of high school geology, we kick-started our 2017 webinar program with three ‘rock stars’ of CO2 storage communication – Dr Linda Stalker, Science Director of Australia’s National Geosequestration Laboratory, Lori Gauvreau, Communication and Engagement Specialist for Schlumberger Carbon Services, and Norm Sacuta, Communication Manager at the Petroleum Technology Research Centre who all joined Kirsty Anderson, the Institute’s Senior Advisor on Public Engagement, to discuss the challenges of communicating about CO2 storage. They shared tips, tools and some creative solutions for getting people engaged with this topic.
This entire Webinar Series has been designed to hear directly from the experts and project practitioners researching and delivering public engagement, education and outreach best practice for carbon capture and storage. This third webinar was less focused on research and more on the real project problems and best practice solutions. It is a must for anyone interested in science communication/education and keen to access resources and ideas to make their own communications more engaging.
Water use of thermal power plants equipped with CO2 capture systemsGlobal CCS Institute
The potential for increased water use has often been noted as a challenge to the widespread deployment of carbon capture and storage (CCS) to mitigate greenhouse gas emissions. Early studies, that are widely referenced and cited in discussions of CCS, indicated that installation of a capture system would nearly double water consumption for thermal power generation, while more recent studies show different results. The Global CCS Institute has conducted a comprehensive review of data available in order to clarify messages around water consumption associated with installation of a capture system. Changes in water use estimates over time have been evaluated in terms of capture technology, cooling systems, and how the data are reported.
Guido Magneschi, Institute’s Senior Advisor – Carbon Capture, and co-author of the study, presented the results of the review and illustrated the main conclusions.
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
2. The Global CCS Institute
Improve public understanding and acceptance
Increase policy support
Advance commercial opportunities
Our mission: to accelerate the development and deployment of CCS
globally
3. The Global Status of CCS: 2016
The Institute’s key publication
Summary Report, Key Findings and other
advocacy materials can be found at:
www.status.globalccsinstitute.com
Full report is available online at the Institute’s
Members Portal.
5. 75% of Primary Energy Demand from Fossil Fuel in 2040
Source: BP Statistical Review of World Energy 2015
Fossil fuel proved reserves:
6 trillion barrels of oil equivalent
Reserves to production ratio:
~75 years
Source: IEA World Energy Outlook, 2015 (New policies scenario)
6. Non-
OECD
OECD
~ 95
Gt CO2
Power
Industry
~95
Gt CO2
Source: IEA, Energy Technology Perspectives (2015).
CCS contributes 13% of cumulative reductions required through 2050 in a 2DS world compared to ‘business as usual’
13% of CO2 Reductions Should Come from CCS
7. *Percentage increase in total discounted mitigation costs (2015-2100) relative to default technology assumptions – median estimate
+ 7% + 6%
+ 64%
+ 138%
Baseline cost
with all mitigation
options utilized
Source: IPCC Fifth Assessment Synthesis Report, Summary for Policymakers, November 2014.
Cost increase under
limited technology
availability scenarios
50
100
150
Percentage*
Nuclear phase out Limited solar/wind
Limited bioenergy
No CCS
138% Higher Cost to Stay Below 2C without CCS
8. Essential but not Inevitable
Data source: IEA 2015 “Tracking Clean Energy Progress”. Bloomberg New Energy Finance “Clean Energy
Investment By the Numbers – End of Year 2015” fact pack.
USD billion since 2006
20
2,500
-
500
1,000
1,500
2,000
2,500
3,000
CCS Total clean energy
9. 38 large-scale CCS facilities -
combined CO2 capture capacity
of approximately 70 Mtpa*:
• 21 facilities in operation or
construction (40.3 Mtpa)
• 6 facilities in advanced
planning (8.4 Mtpa)
• 11 facilities in earlier stages of
planning (21.1 Mtpa)
OECDNon-OECD
Almost 4,000 Mtpa of CO2
captured and stored by 2040
(IEA 2DS Scenario)**
40 Mtpa
Global Status of CCS
November 2016
*Mtpa = million tonnes per annum
**Source: IEA, 2016. Energy Technology Perspectives: Towards Sustainable Urban Energy Systems. Paris. OECD/IEA.
Essential but not Inevitable
10. Carbon Capture Operational Milestones
Boundary Dam
CCS Project
Over one million
tonnes of CO2
captured and used
mainly for
enhanced oil
recovery
Petrobras Santos Basin
Pre-Salt Oil Field CCS
Project
Three million tonnes of CO2
injected into producing reservoirs
Quest
Over one
million tonnes
of CO2
captured and
stored in a
deep saline
formation
Sleipner CO2
Storage Project
20 years of successful
operations, over 18
millions tonnes of CO2
stored
Jilin Oil Field EOR
Demonstration Project
Over one million tonnes of CO2
injected
Air Products Steam Methane
Reformer EOR Project
Three million tonnes of CO2
captured and used for enhanced
recovery
11. Carbon Capture Project Startups
Illinois Industrial
CCS Project
Nearing operations
Kemper County
Energy Facility
Operations imminent
Petra Nova
Carbon
Capture Project
Operations
imminent
Gorgon Carbon Dioxide
Injection Project
Operations anticipated late in the first
half of 2017
Abu Dhabi CCS Project
World’s first operational CCS
project in the iron and steel
sector
Norway Full
Chain CCS
Project
2017 budget supports
full-chain CCS project
Tomakomai CCS
Demonstration Project
Japan’s first fully integrated
CCS Project
ROAD
New storage site permitting,
confidence for project
progression heightened
Yangchang Integrated CCS
Demonstration Project
Approaching final investment
decision
ACTL
Capturing CO2
from multiple
industrial sources
for EOR; late
2017 start
12. Large-Scale CCS Facilities by Region
North America dominates – three of the five facilities in construction soon to be operational,
China has most facilities in planning, facility pipeline needs replenishment.
North America 1 1 5 10 17
Early
planning
Advanced
planning
Construction Operation Total
China 5 3 - - 8
Europe 2 1 - 2 5
Gulf Cooperation
Council
- - - 2 2
Rest of World* 3 1 1 1 6
Total 11 6 6 15 38
* Includes facilities in Australia, Brazil and South Korea.
13. The Future of CCS
1. A shift in focus from power generation to industrial
2. From single source/single storage to hub & spoke and trunkline
approaches
3. Recognition that fuel switching from coal to natural gas is not
enough
4. From bolt-on to integrated
5. The rise of CO2 utilization
14. Closing Thoughts
1. CCS is a proven, safe, reliable and cost-effective technology
2. The pace of CCS deployment must be accelerated if we are to
limit climate change
3. Policy parity is integral to the widespread adoption of CCS
15. The Global Status of CCS: 2016
The Institute’s key publication
Summary Report, Key Findings and other
advocacy materials can be found at:
www.status.globalccsinstitute.com
Full report is available online at the Institute’s
Members Portal.