RAM is a type of computer memory that allows random access to stored data. To install RAM, open the clips on the DIMM slot, align the memory module with the notch, and slide it into the slot while pushing down on each corner until the clips snap shut, using force if needed but ensuring proper alignment.

2. RAM RANDOM ACCESS MEMORY: The personal computer memory module is a piece of hardware that allows stored data to be accessed randomly. Its main function is to store the data temporarily.

3. First Open the DIMM slot clips then position the memory card.

4. Align the module with the slot, making sure the groove on the module lines up with the notch on the slot.

5. Without forcing anything, slide the module into the DIMM slot and push down evenly on each corner until both clips snap shut. This may require some force so check that you have the module aligned with the slot correctly before pushing hard.