Cara Pasang Ariston Water Heater electric 082122541663 atau pemanas air listrik merupakan alat pemanas air yang menggunakan energi listrik sebagai sumber energinya untuk dapat memenuhi kebutuhan mandi air panas keluarga Anda secara praktis. Sebenarnya, untuk pemasangan alat ini bisa dilakukan sendiri tanpa harus memakai jasa tukang. Dengan begitu kita dapat lebih menghemat biaya pengeluaran untuk membayar jasa tukang untuk memasang water heater listrik.
Berikut ini hal yang perlu diperhatikan untuk memasang water heater atau pemanas air listrik :
· Sebelum memasang pemanas air, Anda perlu menyiapkan instalasi pipa untuk jalur air panas dan jalur air dingin yang masuk ke dalam water heater. Pipa yang digunakan untuk saluran air panas pada pemanas air tentunya harus pipa khusus yang tahan terhadap panas tinggi seperti pipa dengan material polypropylene, serta material non-korosif yang tahan terhadap berbagai cairan kimia dan bebas dari sedimentasi (pengikisan).
· Kran mixing atau yang biasa kita kenal dengan kran panas dingin yang memiliki 2 saluran yaitu saluran air panas dan saluran air dingin yang nantinya akan digunakan untuk menyalurkan air dari water heater.
· Alat water heater listrik lebih baik dipasang minimal 1.5m dari lantai agar memudahkan Anda dalam pemasangan dan pengaturan pada water heater serta agar terhindar dari cipratan air mandi.
Jual,Harga,Distributor Water Heater Pemanas Air Ariston Toko Jakarta,Bekasi,Tangerang Electrik Harga Murah Ekonomis Bergaransi Cv Fikri Mandiri Jaya 082113812149 @Copyrigh - Budi JR - 2016
Air/water chiller for indoor installation. Suitable for air-conditioning and the production of hot water for medium-sized services in residential and commercial buildings.
Cooling capacity: 51.1 ÷ 306.6 kW
R410A refrigerant
Cooling only
Scroll compressor
Plug fan
Plate exchanger
Heat recovery (Option)
Pump kit (Option)
Water tank (Option)
Lownoise version (Option)
Network operation (Option)
Compatible with ModBus protocol (Option)
Internet connection (Option)
For two pipes plants
Jual,Harga,Distributor Water Heater Pemanas Air Ariston Toko Jakarta,Bekasi,Tangerang Electrik Harga Murah Ekonomis Bergaransi Cv Fikri Mandiri Jaya 082113812149 @Copyrigh - Budi JR - 2016
Air/water chiller for indoor installation. Suitable for air-conditioning and the production of hot water for medium-sized services in residential and commercial buildings.
Cooling capacity: 51.1 ÷ 306.6 kW
R410A refrigerant
Cooling only
Scroll compressor
Plug fan
Plate exchanger
Heat recovery (Option)
Pump kit (Option)
Water tank (Option)
Lownoise version (Option)
Network operation (Option)
Compatible with ModBus protocol (Option)
Internet connection (Option)
For two pipes plants
Eco Pacific Brochure help you how to install Eco Pacific Pluto Range Gas Ducted Heaters manually. Download the brochure and simply follow the steps one by one. Or Call ducted heating victoria at: 1300.
buttons puccini, connection cable, control units, device board, display interface, drinking water at home, environment, female connector, filters for drinking water, h2o, health water, high pressure volumetric counter, interface for payment system executive, level regulator, level sensor, probe, public fountain, public fountain kit 24 vac, technical kit buttons and display, water dispenser
We are a products, solutions and services wholesale supplier in water treatment. We provide only businesses companies such as distributors, retailers, manufacturers and assemblers.A catalog including carefully selected products, from the most prestigious brands in the Water Treatment market, operative website, personalized services, precise and efficient logistics, flexible organization, but also the basic importance that is attributed to human factors and relationships with partners, make of Sinergroup Srl a reference for many companies of the market. A continuous and consistent effort, the ability to anticipate the evolution of the market demand and orientation to the understanding and satisfaction of our customers has always characterizes us in our work.
Born with the objective view in the exclusive distribution: Continue to be "Leader of the Brand Leader ", with activities and services of value. A choice of specialization that in recent years has allowed us to develop a unique knowledge and experience in the market. The thorough water treatment market understanding and high commercial performance, make us able to offer to our customers many products and services more personalized and appropriate to the individual end user. Our mission is to become your best business Partner!
Industrial Bimetallic Thermometers: 3 and 5 Inch Adjustable AngleMiller Energy, Inc.
Heavy duty, industrial bimetallic thermometers with a versatile case and stem that can be adjusted to almost any angle for easy viewing. The head can be rotated 360º and the stem positioning moves over 180º. These thermometers are rugged
and preferred by the process, offshore, power, pharmaceutical, and chemical industries.
The union connection is 1/2-14 NPT, but others are
Cara Pasang Ariston Water Heater electric 082122541663 atau pemanas air listrik merupakan alat pemanas air yang menggunakan energi listrik sebagai sumber energinya untuk dapat memenuhi kebutuhan mandi air panas keluarga Anda secara praktis. Sebenarnya, untuk pemasangan alat ini bisa dilakukan sendiri tanpa harus memakai jasa tukang. Dengan begitu kita dapat lebih menghemat biaya pengeluaran untuk membayar jasa tukang untuk memasang water heater listrik.
Berikut ini hal yang perlu diperhatikan untuk memasang water heater atau pemanas air listrik :
· Sebelum memasang pemanas air, Anda perlu menyiapkan instalasi pipa untuk jalur air panas dan jalur air dingin yang masuk ke dalam water heater. Pipa yang digunakan untuk saluran air panas pada pemanas air tentunya harus pipa khusus yang tahan terhadap panas tinggi seperti pipa dengan material polypropylene, serta material non-korosif yang tahan terhadap berbagai cairan kimia dan bebas dari sedimentasi (pengikisan).
· Kran mixing atau yang biasa kita kenal dengan kran panas dingin yang memiliki 2 saluran yaitu saluran air panas dan saluran air dingin yang nantinya akan digunakan untuk menyalurkan air dari water heater.
· Alat water heater listrik lebih baik dipasang minimal 1.5m dari lantai agar memudahkan Anda dalam pemasangan dan pengaturan pada water heater serta agar terhindar dari cipratan air mandi.
Cara Pasang Ariston Water Heater electric 082122541663 atau pemanas air listrik merupakan alat pemanas air yang menggunakan energi listrik sebagai sumber energinya untuk dapat memenuhi kebutuhan mandi air panas keluarga Anda secara praktis. Sebenarnya, untuk pemasangan alat ini bisa dilakukan sendiri tanpa harus memakai jasa tukang. Dengan begitu kita dapat lebih menghemat biaya pengeluaran untuk membayar jasa tukang untuk memasang water heater listrik.
Berikut ini hal yang perlu diperhatikan untuk memasang water heater atau pemanas air listrik :
· Sebelum memasang pemanas air, Anda perlu menyiapkan instalasi pipa untuk jalur air panas dan jalur air dingin yang masuk ke dalam water heater. Pipa yang digunakan untuk saluran air panas pada pemanas air tentunya harus pipa khusus yang tahan terhadap panas tinggi seperti pipa dengan material polypropylene, serta material non-korosif yang tahan terhadap berbagai cairan kimia dan bebas dari sedimentasi (pengikisan).
· Kran mixing atau yang biasa kita kenal dengan kran panas dingin yang memiliki 2 saluran yaitu saluran air panas dan saluran air dingin yang nantinya akan digunakan untuk menyalurkan air dari water heater.
· Alat water heater listrik lebih baik dipasang minimal 1.5m dari lantai agar memudahkan Anda dalam pemasangan dan pengaturan pada water heater serta agar terhindar dari cipratan air mandi.
Cara Pasang Ariston Water Heater electric 082122541663 atau pemanas air listrik merupakan alat pemanas air yang menggunakan energi listrik sebagai sumber energinya untuk dapat memenuhi kebutuhan mandi air panas keluarga Anda secara praktis. Sebenarnya, untuk pemasangan alat ini bisa dilakukan sendiri tanpa harus memakai jasa tukang. Dengan begitu kita dapat lebih menghemat biaya pengeluaran untuk membayar jasa tukang untuk memasang water heater listrik.
Berikut ini hal yang perlu diperhatikan untuk memasang water heater atau pemanas air listrik :
· Sebelum memasang pemanas air, Anda perlu menyiapkan instalasi pipa untuk jalur air panas dan jalur air dingin yang masuk ke dalam water heater. Pipa yang digunakan untuk saluran air panas pada pemanas air tentunya harus pipa khusus yang tahan terhadap panas tinggi seperti pipa dengan material polypropylene, serta material non-korosif yang tahan terhadap berbagai cairan kimia dan bebas dari sedimentasi (pengikisan).
· Kran mixing atau yang biasa kita kenal dengan kran panas dingin yang memiliki 2 saluran yaitu saluran air panas dan saluran air dingin yang nantinya akan digunakan untuk menyalurkan air dari water heater.
· Alat water heater listrik lebih baik dipasang minimal 1.5m dari lantai agar memudahkan Anda dalam pemasangan dan pengaturan pada water heater serta agar terhindar dari cipratan air mandi.
Eco Pacific Brochure help you how to install Eco Pacific Pluto Range Gas Ducted Heaters manually. Download the brochure and simply follow the steps one by one. Or Call ducted heating victoria at: 1300.
buttons puccini, connection cable, control units, device board, display interface, drinking water at home, environment, female connector, filters for drinking water, h2o, health water, high pressure volumetric counter, interface for payment system executive, level regulator, level sensor, probe, public fountain, public fountain kit 24 vac, technical kit buttons and display, water dispenser
We are a products, solutions and services wholesale supplier in water treatment. We provide only businesses companies such as distributors, retailers, manufacturers and assemblers.A catalog including carefully selected products, from the most prestigious brands in the Water Treatment market, operative website, personalized services, precise and efficient logistics, flexible organization, but also the basic importance that is attributed to human factors and relationships with partners, make of Sinergroup Srl a reference for many companies of the market. A continuous and consistent effort, the ability to anticipate the evolution of the market demand and orientation to the understanding and satisfaction of our customers has always characterizes us in our work.
Born with the objective view in the exclusive distribution: Continue to be "Leader of the Brand Leader ", with activities and services of value. A choice of specialization that in recent years has allowed us to develop a unique knowledge and experience in the market. The thorough water treatment market understanding and high commercial performance, make us able to offer to our customers many products and services more personalized and appropriate to the individual end user. Our mission is to become your best business Partner!
Industrial Bimetallic Thermometers: 3 and 5 Inch Adjustable AngleMiller Energy, Inc.
Heavy duty, industrial bimetallic thermometers with a versatile case and stem that can be adjusted to almost any angle for easy viewing. The head can be rotated 360º and the stem positioning moves over 180º. These thermometers are rugged
and preferred by the process, offshore, power, pharmaceutical, and chemical industries.
The union connection is 1/2-14 NPT, but others are
Cara Pasang Ariston Water Heater electric 082122541663 atau pemanas air listrik merupakan alat pemanas air yang menggunakan energi listrik sebagai sumber energinya untuk dapat memenuhi kebutuhan mandi air panas keluarga Anda secara praktis. Sebenarnya, untuk pemasangan alat ini bisa dilakukan sendiri tanpa harus memakai jasa tukang. Dengan begitu kita dapat lebih menghemat biaya pengeluaran untuk membayar jasa tukang untuk memasang water heater listrik.
Berikut ini hal yang perlu diperhatikan untuk memasang water heater atau pemanas air listrik :
· Sebelum memasang pemanas air, Anda perlu menyiapkan instalasi pipa untuk jalur air panas dan jalur air dingin yang masuk ke dalam water heater. Pipa yang digunakan untuk saluran air panas pada pemanas air tentunya harus pipa khusus yang tahan terhadap panas tinggi seperti pipa dengan material polypropylene, serta material non-korosif yang tahan terhadap berbagai cairan kimia dan bebas dari sedimentasi (pengikisan).
· Kran mixing atau yang biasa kita kenal dengan kran panas dingin yang memiliki 2 saluran yaitu saluran air panas dan saluran air dingin yang nantinya akan digunakan untuk menyalurkan air dari water heater.
· Alat water heater listrik lebih baik dipasang minimal 1.5m dari lantai agar memudahkan Anda dalam pemasangan dan pengaturan pada water heater serta agar terhindar dari cipratan air mandi.
Cara Pasang Ariston Water Heater electric 082122541663 atau pemanas air listrik merupakan alat pemanas air yang menggunakan energi listrik sebagai sumber energinya untuk dapat memenuhi kebutuhan mandi air panas keluarga Anda secara praktis. Sebenarnya, untuk pemasangan alat ini bisa dilakukan sendiri tanpa harus memakai jasa tukang. Dengan begitu kita dapat lebih menghemat biaya pengeluaran untuk membayar jasa tukang untuk memasang water heater listrik.
Berikut ini hal yang perlu diperhatikan untuk memasang water heater atau pemanas air listrik :
· Sebelum memasang pemanas air, Anda perlu menyiapkan instalasi pipa untuk jalur air panas dan jalur air dingin yang masuk ke dalam water heater. Pipa yang digunakan untuk saluran air panas pada pemanas air tentunya harus pipa khusus yang tahan terhadap panas tinggi seperti pipa dengan material polypropylene, serta material non-korosif yang tahan terhadap berbagai cairan kimia dan bebas dari sedimentasi (pengikisan).
· Kran mixing atau yang biasa kita kenal dengan kran panas dingin yang memiliki 2 saluran yaitu saluran air panas dan saluran air dingin yang nantinya akan digunakan untuk menyalurkan air dari water heater.
· Alat water heater listrik lebih baik dipasang minimal 1.5m dari lantai agar memudahkan Anda dalam pemasangan dan pengaturan pada water heater serta agar terhindar dari cipratan air mandi.
Cara Pasang Ariston Water Heater electric 082122541663 atau pemanas air listrik merupakan alat pemanas air yang menggunakan energi listrik sebagai sumber energinya untuk dapat memenuhi kebutuhan mandi air panas keluarga Anda secara praktis. Sebenarnya, untuk pemasangan alat ini bisa dilakukan sendiri tanpa harus memakai jasa tukang. Dengan begitu kita dapat lebih menghemat biaya pengeluaran untuk membayar jasa tukang untuk memasang water heater listrik.
Berikut ini hal yang perlu diperhatikan untuk memasang water heater atau pemanas air listrik :
· Sebelum memasang pemanas air, Anda perlu menyiapkan instalasi pipa untuk jalur air panas dan jalur air dingin yang masuk ke dalam water heater. Pipa yang digunakan untuk saluran air panas pada pemanas air tentunya harus pipa khusus yang tahan terhadap panas tinggi seperti pipa dengan material polypropylene, serta material non-korosif yang tahan terhadap berbagai cairan kimia dan bebas dari sedimentasi (pengikisan).
· Kran mixing atau yang biasa kita kenal dengan kran panas dingin yang memiliki 2 saluran yaitu saluran air panas dan saluran air dingin yang nantinya akan digunakan untuk menyalurkan air dari water heater.
· Alat water heater listrik lebih baik dipasang minimal 1.5m dari lantai agar memudahkan Anda dalam pemasangan dan pengaturan pada water heater serta agar terhindar dari cipratan air mandi.
Harga distributor jual Pasang pemasangan baru service maintenance repair panggilan water heater ariston pemanas air listrik kapasitas 15-30-50-80-100 Tipe AN R - RS - Pro R - ECO - TI PRO Jakarta Indonesia Oleh Cv Fikri Mandiri Jaya
Perusahaan kami telah berpengalaman Sebagai service penjualan ariston water heater yang memberikan jasa pasang Resmi ariston pemanas air merek lain harga murah bergaransi
Distributor Pemasangan Harga Spare Part, Elemen Elektrik, Thermostat, Cek Valve, Anoda, Aquades
Perusahaan kami terlibat juga dalam beberapa kontrak baik untuk Maintenace dan Service Pemanas Air Solahart di Perumahan ternama, rumah sakit maupun di hotel.
Jual,Harga,Distributor Water Heater Pemanas Air Ariston Toko Jakarta,Bekasi,Tangerang Electrik Harga Murah Ekonomis Bergaransi Cv Fikri Mandiri Jaya 082113812149 @Copyrigh - Budi JR - 2016
Jual,Harga,Distributor Water Heater Pemanas Air Ariston Toko bogor akarta,Bekasi,Tangerang Electrik Harga Murah Ekonomis Bergaransi Cv Fikri Mandiri Jaya 082113812149 @Copyrigh - Budi JR - 2016
Jual,Harga,Distributor Water Heater Pemanas Air Ariston Toko Jakarta,Bekasi,Tangerang Electrik Harga Murah Ekonomis Bergaransi Cv Fikri Mandiri Jaya 082113812149 @Copyrigh - Budi JR - 2016
Jual,Harga,Distributor Water Heater Pemanas Air Ariston Toko Jakarta,Bekasi,Tangerang Electrik Harga Murah Ekonomis Bergaransi Cv Fikri Mandiri Jaya 082113812149
Jual,Harga,Distributor Water Heater Pemanas Air Ariston Toko Jakarta,Bekasi,Tangerang Electrik Harga Murah Ekonomis Bergaransi Cv Fikri Mandiri Jaya 082113812149
Wall Hung Electric Boiler
3 level pump and additional pump option
6 different security system
7 days, 21 program
Anti blockage and freezing prevention system
Different temperature value determination for each program
Full modulation, high efficiency.
Grounding heating or radiator heating option
If required 3 level setting
Operating as 3 phase or single phase
Operation conformity with solar energy
Summer – Winter mode option
Touch Button and easy use LCD panel
Electric Combi Boiler Properties
3 Level Pump and Additional Pump Option
6 Different Security System
7 Days, 21 Program with Interior Timer
Anti Blockage and Freezing Prevention System
Different Temperature Value Determination For Each Program
Full Modulation, High Efficiency.
Under Floor Heating or Radiator Heating Option
If Required 3 Level Setting
Operating as 3 Phase or Single Phase
Operation Conformity with Solar Energy
Summer – Winter Mode Option
Touch Button and Easy Use Lcd Panel
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
1. MTS MAKES USE OF
RECYCLED PAPER
029.1.60.542.1.051203Litografs.r.l.Jesi
Controlled Energy Corp.
340 Mad River Park
Waitsfield, VT 05673
866-330-2729
www.controlledenergy.com/tech
COMMONSENSEHEAT&HOTWATERTECHNOLOGY
Merloni TermoSanitari SpA
Viale Aristide Merloni, 45
60044 Fabriano (AN)
Tel. 0732.6011
Telefax. 0732.602331
http://www.mtsgroup.com
E-mail: marketing@it.mtsgroup.com
Electric Mini Tank
Water heaters
GL 2.5 - GL 4 - GL 6+
2. The installer should review the contents of this manual with the owner upon
completion of installation, and the manual should be left with the owner and placed in
a location close to the installation.
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, safety precautions to reduce the risk of fire, electric
shock or injury to persons should be followed, including:
1. READ ALL INSTRUCTIONS BEFORE USING THIS WATER HEATER.
2. This water heater must be grounded. Connect only to properly grounded outlet.
See “GROUNDING INSTRUCTIONS” found on “INSTALLATION INSTRUCTIONS”.
3. Install or locate this water heater only in accordance with the provided installation
instructions.
4. Use this water heater only for its intended use as described in this manual.
5. Do not use an extension cord set with this water heater. If no outlet is available
adjacent to the water heater, contact a qualified electrician to have one properly
installed.
6. As with any appliance, close supervision is necessary when used by children.
7. Do not operate this water heater if it is not working properly or if it has been
damaged or dropped.
8. This water heater should be serviced only by qualified service personnel. Contact
a service person for examination, repair or adjustment.
9. Any water heater should be installed in such a manner that if it should leak, the
resulting flow of water will not cause damage to the area in which it is installed.
National Plumbing codes require a drain pan for any water heater installation.
Failure to install one is the sole responsibility of owner and/or installer. Reference
UPC 2000 (Uniform Plumbing Code) Section 510 - Protection from Damage or
IPC 200 (International Plumbing Code) Section 504- Safety Devices.
KEEPTHESE INSTRUCTIONS AT HAND
SAVE THESE INSTRUCTIONS
WARNING
MODEL GL 2.5 GL 4 GL 6+
Capacity gallons 2.75 3.85 7.0 (Hor) / 5.1 (Vert)
Voltage Vac 110/120 for each model
Power at 120 Vac Watts 1500 1500 1500
Maximum Water pressure psi 150 150 150
Weight Lbs 15.5 17.3 29.5
Amperage Amps 12.50 for each model
Phases 1 1 1
Technical data
WARNING
1
29.1.60.542.1.04libretto 19-01-2004 9:35 Pagina1
3. Temperature & pressure
relief valve, 3/4 NPT male
Temperature & pressure
relief valve, 3/4 NPT male
3/4 NPT female
tapping for
relief valve
3/4 NPT female
tapping
3/4 NPT female
tapping
3/4 NPT female
tapping for
relief valve
Hot water outlet
1/2 NPT male
3/4 NPT female
tapping for
relief valve
FIG. 1/1 Temperature & pressure
relief valve, 3/4 NPT male
Cold water inlet
1/2 NPT male
Temperature &
pressure relief
valve discharge
line to drain
COMPONENT
PARTS OF
GL 2.5 - GL 4
COMPONENT
PARTS OF
GL 6+
(Vertical
installation)
COMPONENT PARTS OF GL 6+
(Horizontal installation)
FIG. 1/2
FIG. 1/3
Temperature &
pressure relief
valve discharge
line to drain
Hot water outlet
3/4 NPT male
Hot water outlet
3/4 NPT male
3/4 NPT male plug
3/4 NPT male plug
Temperature &
pressure relief
valve discharge
line to drain
Cold water inlet
3/4 NPT male
Cold water inlet
3/4 NPT male
2
29.1.60.542.1.04libretto 19-01-2004 9:35 Pagina2
5. General remarks
The manufacturer cannot be responsible for the damages caused by improper
installation or by failure to follow instructions in this pamphlet. Comply with the
installation instructions before completing electric connection.
The thermostat has been pre-set at the factory between 41°C (105° F) and 45° C (113° F).
Hydrogen gas can be produced in a hot water system served by this heater that has not
been used for a long period of time (generally 2 weeks or more). Hydrogen gas is
extremely flammable. To reduce the risk of injury under these conditions, it is
recommended that the hot water faucet be opened for several minutes before using any
electrical appliance connected to the hot water system. If hydrogen gas is present, there
will probably be an unusual sound such as air escaping through the pipe as the water
begins to flow. There should be no smoking or open flame near the faucet at this time.
Any water heater should be installed in such a manner that if it should leak, the resulting
flow of water will not cause damage to the area in which it is installed. National Plumbing
codes require a drain pan for any water heater installation. Failure to install one is the
sole responsibility of owner and/or installer. Reference UPC 2000 (Uniform Plumbing
Code) Section 510- Protection from Damage or IPC 2000 (International Plumbing Code)
Section 504- Safety Devices.
CAUTION
CAUTION
CAUTION
CAUTION
Installation instructions
Fasten the supplied mounting bracket to the wall. Use screws that are suitable for the
wall material and the weight of the heater. Hang the water heater on the bracket. Tug
down wards on the heater to ensure that both “fingers” of the bracket are seated in the
mounting slots. Confirm water piping orientation before wall mounting.Wall bracket will
not support the GL6+ when the plumbing connections are installed horizontally.
Heater can sit on floor. Confirm water piping orientation before locating on floor location.
As per the National Electric Code the GL6+ needs to be wired with 12 GA. wire to a minimum
20 amp/ maximum 20 amp branch circuit. To wire the GL6+ model:
1. Pry off the round cover plate (V Fig. 3/1) from its right hand edge (W Fig. 3/1) with a
small flat-head screwdriver.
2. Remove the Phillips screw revealed beneath the round cover plate.
3. The cover (C Fig. 3/1) can now be removed by pulling out its left-hand edge. When
reassembling, work in the opposite way being careful to insert the tongue of the cover
into the slot.
4. Insert 12 AWG through conduit at rear of heater. Secure internal wire connector
(A Fig. 3/2) and connect wiring to right side of thermostat control and ground. Positive
(+) to lower terminal marked “L” (E Fig. 3/2) and Neutral to upper terminal marked “N”
(H Fig. 3/2). Unit must be grounded at groundscrew (T Fig. 3/2) on element base.
5. When the GL6+ is not within sight of the electrical circuit breakers, a circuit breaker
lockout or additional local means of disconnection for all non grounded conductors must
be provided that is within sight of the appliance. [REF NEC 422.31]
Connect the cold water inlet pipe to the inlet nipple (marked with a blue ring) and the hot
water outlet pipe to the outlet nipple (marked with a red ring).
The model GL 6+ can be piped horizontally from the side or vertically from the top. If you
wish to install the unit horizontally, with the piping connections on the right side, you will have
to be certain the tap between the two water tappings is plugged, the supplied Temperature
and Pressure Relief Valve will need to be installed on top. See location of T&P relief valve in
Fig. 2/2.
Wall
mounting
(only for vertical
installation)
MODEL GL 6+
Wiring
and
Grounding
instructions
Pipe
connections
Floor
Mounting
The GL 6+ water heater can be installed under the sink.
4
29.1.60.542.1.04libretto 19-01-2004 9:35 Pagina4
6. MODEL GL 2.5 - GL 4
The GL 2.5 and GL 4 water heaters can be installed under the sink.
Fasten the supplied mounting bracket to the wall. Use screws that are suitable for the
wall material and the weight of the heater. Hang the water heater on the bracket. Tug
down wards on the heater to ensure that both “fingers” of the bracket are seated in the
mounting slots.
Wall
mounting
FIG. 3/2 G
H
E
A
Z
F
X
Y T
FIG. 3/1
V
C
FW
If you wish to install the unit vertically, with the piping connections on top, you will have to
be certain the tap on the side is plugged, the supplied Temperature and Pressure Relief
Valve will need to be installed on top. See location of T&P relief valve in Fig. 2/3.
5
29.1.60.542.1.04libretto 19-01-2004 9:35 Pagina5
7. Heater can sit on floor.
Connect the cold water inlet pipe to the inlet nipple (marked with a blue ring) and the hot
water outlet pipe to the outlet nipple (marked with a red ring).
To reduce the risk of excessive pressures and temperatures in this water heater, install
the supplied temperature and pressure protective equipment required by local codes
but not less than a combination temperature and pressure relief valve certified by a
nationally recognized testing laboratory that maintains periodic inspection of
production of listed equipment or materials, as meeting the requirements for Relief
Valves and Automatic Gas Shut-off Devices for Hot Water Supply Systems, ANSI
Z21.22.The supplied temperature and pressure relief valve is marked with a maximum
set pressure (150 psi) that does not exceed the marked maximum working pressure
of the water heater. Install the valve in the opening provided and marked for this
purpose in the water heater, and orient it or provide tubing so that any discharge from
the valve will exit within 6 inches above, or at any distance below, the structural floor,
and cannot contact any live electrical part.The discharge opening must not be blocked
or reduced in size under any circumstances.
National Plumbing codes require a drain pan for any water heater installation. Failure
to install one is the sole responsibility of owner and/or installer. Reference UPC 2000
(Uniform Plumbing Code) Section 510- Protection from Damage or IPC 2000
(International Plumbing Code) Section 504- Safety Devices.
Periodic discharge of the temperature and pressure relief valve or failure of the
element gasket may be due to thermal expansion in a closed water supply system.
The water utility supply meter may contain a check valve, backflow preventer or water
pressure reducing valve which will create a closed water system. During the heating
cycle of the water heater, the water expands causing pressure inside the water heater
to increase. The temperature and pressure relief valve may discharge hot water under
these conditions which results in a loss of energy and a build-up of lime on the relief
valve seat.
To prevent this from happening, there are two recommendations:
1. Install a diaphragm-type expansion tank that is suitable for potable water on the
cold water supply line. The expansion tank must have a minimum capacity of 1.5
U.S. gallons for every 50 gallons of stored water.
2. Install a 125 PSI pressure relief valve in the cold water supply line. Make sure the
discharge of this valve is directed to an open drain and protected from freezing.
Contact the local water supplier or plumbing inspector for information on how to
control this situation. Do not plug the temperature and pressure relief valve.
Instructions for use
Before connecting the power, fill the tank and system with water and check for leaks. To
be certain that all air is out of the water system, open the hot water faucets on your fixtures
until constant water flows from them, otherwise damage to the element may occur.
To start the heating cycle:
A) first make sure tank is full. Otherwise the heating element may be damaged.
B) the red light will come on and remain on until that temperature has been reached,
at which point the light will go off, but will automatically come back on when the
water temperature drops below the setting chosen.
After installation check the water temperature. If adjustment is necessary, remove front
cover to adjust thermostat (D Fig. 4 -clockwise to increase the temperature and
counter clockwise to decrease it).
To reach the thermostat:
1. Pry off the round cover plate (V Fig. 3/1) from its right hand edge (W Fig. 3/1) with
a small flat-head screwdriver.
2. Remove the Phillips screw revealed beneath the round cover plate.
CAUTION
Closed
system
thermal
expansion
(for all
models)
Starting and
testing
Temperature
Setting
6
Pipe
connections
Floor
Mounting
29.1.60.542.1.04libretto 19-01-2004 9:35 Pagina6
8. Maintenance instructions
Note: Do not attempt to repair this water heater yourself. Call a service person
for assistance. Always turn off the power supply to the heater prior to
servicing or draining the heater.
Periodic maintenance
Note: For most of these operations, the water will have to be drained from the heater.
For all of these operations the power supply needs to be shut off and the front
cover removed.
1. Pry off the round cover plate (V Fig. 3/1) from its right hand edge (W
Fig. 3/1) with a small flat-head screwdriver.
2. Remove the Phillips screw revealed beneath the round cover plate.
3. The cover (C Fig. 3/1) can now be removed by pulling out its left-hand
edge. When reassembling, work in the opposite way being careful to
insert the tongue of the cover into the slot.
1) If the heater has been installed with flexible hoses, shut off the power supply and
turn the heater upside down over a sink to drain the water out of it, OR
2) If the heater has been installed with rigid piping, siphon the water out through any
(lower) service valve on the (inlet side). Keep a hot water faucet open while
siphoning the water out, OR
3) If the heater has been installed with flexible hoses, it can also be emptied by
siphoning through the inlet side hose. Keep a hot water faucet open while
siphoning.
7
Draining
the Heater
FIG. 4
D
B
3. The cover (C Fig. 3/1) can now be removed by pulling out its left-hand edge.
When reassembling, work in the opposite way being careful to insert the tongue
of the cover into the slot.
29.1.60.542.1.04libretto 19-01-2004 9:35 Pagina7
9. Changing
the anode
rod
REPLACEMENT OF PARTS
B) Once the element has dried up, use a soft brush (non metallic to prevent damaging
the stainless steel sheath) on element. Brush the dried mineral off. Reinstall the
element with gasket and make the wire connections.
C) Replace anode rod (N Fig. 5/2) if it is noticeably deteriorated or considerably
shorter then seen in figure 5/2.
WARNING: make sure the tank has been refilled with water before restoring power.
The anode rod (N fig. 5/2) helps protect the tank against corrosion. Depending on the
water condition, the magnesium anode rod may need to be changed every year or so.
Galvanic and electrolytic corrosion can destroy a tank if the anode rod is “spent”.
Rusty water is usually an indication of a “spent” anode rod. If rusty water is present,
examine anode rod immediately. Rapid degradation of the anode rod (less than 1
year) may indicate the presence of galvanic corrosion due to “stray” direct current. In
this case, it may be necessary to add a “grounding strap” from the Ariston tank to the
copper plumbing.
1. Turn off the power supply and drain the heater (see Draining the Heater).
2. Remove heating element (see previous section).
3. Remove and replace the anode rod N Fig. 5/2.
4. Refill tank with water before restoring power.
Removing
the heating
element
Descaling
the heating
element
1. Turn off power supply and drain the heater (see previous section).
2. Remove the front cover plate, disconnect terminals X, Y and T (fig. 3/2).
3. Unscrew the 4 heating element retaining nuts F (fig. 3/2).
4. Remove the element. G (fig. 5/1).
Scale deposits can affect the heating capability of the element.
Heavy scale can even cause the element to burn out. The element can be descaled
either chemically or manually:
A) Soak the element in white vinegar or other descaling solution. Once descaled,
rinse well with fresh water, to which you should add some baking soda, OR
G
FIG. 5/1
N
FIG. 5/2
8
29.1.60.542.1.04libretto 19-01-2004 9:35 Pagina8
10. 9
Water does
not get hot
Light not on
Brown water
Odor in water
Water is too
hot
Water not
hot enough
Leaking
Troubleshooting
1. Make sure the power supply is on and working.
2. If light does not come on, check that the reset button is pushed in; follow steps from
previous section.
3. If the indicator light works properly but temperature does not get hot a tap, test for
a plumbing crossover; shut off cold supply to heater and open hot water tap. There
should be no water flowing. Any continued flow indicates a crossover which will
effect the temperature and will need to be corrected.
4. Replace heating element (see previous section on changing the heating element).
1. If the light does not come on, but water gets hot, check for faulty bulb.
2. Check reset button; follow steps from previous section.
1. Brown or rusty water indicates a “spent” anode rod. Replace anode rod.
1. Smelly water could be due to an unusual reaction between local water and the
heater’s anode rod. Check anode rod (see section on changing the anode rod).
1. Remove cover plate and turn the temperature selector dial (D Fig. 4) counter
clockwise to lower temperature. If temperature never lowers then replace
thermostat. (see section on changing the thermostat).
1. Under Instructions for Use see Temperature Setting instruction.
1. Check water fittings and T & P fitting on top of tank.
2. Remove front cover and inspect heating element gasket.
Occasionally, the high temperature limit shut off device may trigger and shut the
system down. This occurs when water temperature exceeds 190° F and shuts off
power to the heating element. The shut off device may also trigger from a power
outage or electrical storm.
To reach the thermostat:
1. Pry off the round cover plate (V Fig. 3/1) from its right hand edge (W Fig. 3/1) with
a small flat-head screwdriver.
2. Remove the Phillips screw revealed beneath the round cover plate.
3. The cover (C Fig. 3/1) can now be removed by pulling out its left-hand edge. When
reassembling, work in the opposite way being careful to insert the tongue of the
cover into the slot.
4. Firmly press reset button (B Fig. 4). Reconnect power.
5. IMPORTANT: Check the operation of the thermostat, turn temperature dial from
high to low, if the red light does not go off on low setting, turn off power supply and
call a service person to replace the thermostat.
6. If the system works, place dial setting to desired setting. Note: a lower setting is
more economical and reduces the risk of scalding. Replace cover plate.
CAUTION: Call a technician if the high limit needs to be reset frequently.
Resetting
High Limit
Switch
1. Turn off power supply and drain the heater (see Draining the Heater).
2. Remove the heating element (see section on Removing the Heating Element).
3. Install new element with gasket, making sure the gasket and element are positioned
correctly. Tighten the retaining nuts and make the wire connections.
4. Refill tank with water before restoring power.
1. Turn off power supply.
2. Disconnect the 2 push/pull type wires on thermostat.
3. Loosen the two brass screws at right side of thermostat and pull wires out.
4. Unscrew and remove the two phillips screws holding the thermostat down.
5. Install new thermostat and re-attach wiring and screws.
Changing
the heating
element
Changing
the
thermostat
29.1.60.542.1.04libretto 19-01-2004 9:35 Pagina9
12. ARISTON • LIMITED 6 YEARS WARRANTY
COVERAGE
ARISTON, THROUGH ITS U.S. DISTRIBUTOR
BOSCH WATER HEATING.,(hereinafter
BOSCH) guarantees this water heater to
the Owner (hereinafter “Owner”) of the water
heater at the original installation location
against defects in material and workmanship
for the periods specified below.
WARRANTY PERIOD
1. The innerTank - If the inner tank leaks within
six (6) years from the date of original installation
of the water heater, because of a defect in
material or workmanship, BOSCH will furnish
to such Owner a new heater of the then
prevailing comparable model.
2. Any Component Part Other than The
Original Inner Tank - If any component part
(other than the inner tank) proven to be
defective in material or workmanship within one
(1) year from the date of original installation of
the water heater, BOSCH will furnish the
Owner with replacement of the defective part(s).
3. Verification of Date of Original Installation
- When Owner cannot verify or document the
original date of installation, the warranty period
begins on the date of manufacture marked on
the tag affixed to the water heater.
EXCLUSIONS
1. THIS LIMITED WARRANTY SHALL BE THE
EXCLUSIVE WARRANTY MADE BY THE
MANUFACTURER AND IS MADE IN LIEU OF
ALL OTHER WARRANTIES, EXPRESSED OR
IMPLIED (WHETHER WRITTEN OR ORAL),
INCLUDING, BUT NOT LIMITED TO,
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE.
2. The Manufacturer shall not be liable for any
incidental, consequential, special or contingent
damages or expenses arising, directly or
indirectly, from any defect in the water heater or
the use of the water heater.
3. The Manufacturer shall not be liable for any
water damage arising, directly or indirectly, from
any defect in the water heater component
part(s) or from its use.
4. Manufacturer shall not be liable under this
warranty if:
a) The water heater or any of its component
parts has been subject to misuse, alteration,
neglect or accident, or
b) The water heater has not been installed in
accordance with the applicable local
plumbing and/or building code(s) and/or
regulation(s), or
c) The water heater has not been installed in
accordance with the printed manufacturer’s
instructions, or
d) The water heater is not continuously
supplied with potable water.
5. The OWNER and not the Manufacturer or his
representative shall be liable for and shall pay
for all field charges for labor or other expenses
incurred in the removal and/or repair of the
product or any expense incurred by the owner
in order to repair the product.
SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES, SO THE
ABOVE LIMITATION OR EXCLUSION MAY
NOT APPLY TO YOU. THIS WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS AND
YOU MAY ALSO HAVE OTHER RIGHTS
WHICH MAY VARY FROM STATE TO STATE.
IMPORTANT: OWNER SHALL KEEP THIS
MAKE A CLAIM
NOTE: A water heater should be installed in
such a manner that if it should leak, the
resulting flow of water will not cause damage
to the area in which it is installed.
HOW THE OWNER CAN SECURE SERVICE
OR MAKE A CLAIM
1. Owner should contact the dealer who sold
the water heater covered by this warranty or
2. Owner should submit the warranty claim
directly to Bosch Water Heating at the address
listed below, and they will arrange for the
handling of the claim.
3. Whenever any inquiry or service request is
made, be sure to include the water heater
model number the date of manufacture , date of
installation, Dealer’s name and the watts and
voltage.
4. When returning the water heater or
component part(s), they must be individually
tagged and identified with the Returned Goods
Authorization # issued by BOSCH and
shipped prepaid to BOSCH at the address
below.
BBT North America Corporation
Bosch Group
Bosch Water Heating
340 Mad River Park
Waitsfield, VT 05673
Telephone 800-642-3111
Fax (802) 496-6924
techsupport@boschhotwater.com
13. MTS MAKES USE OF
RECYCLED PAPER
029.1.60.542.1.051203Litografs.r.l.Jesi
Merloni TermoSanitari SpA
Viale Aristide Merloni, 45
60044 Fabriano (AN)
Tel. 0732.6011
Telefax. 0732.602331
http://www.mtsgroup.com
E-mail: marketing@it.mtsgroup.com
BBT North America Corporation
Bosch Group
Bosch Water Heating
340 Mad River Park
Waitsfield, VT 05673
Telephone 800-642-3111
Fax (802) 496-6924
techsupport@boschhotwater.com