Inertia dynamics clutch308_310_bearing_specsheet

•

0 likes•60 views

This document provides specifications for extended inner ring bearing assemblies for use with clutches, including the required spacer to maintain armature gap. It lists specifications for various bearing sizes, including inner and outer diameters and dimensions, that correspond to minimum hub diameters of 4-1/2 inches and 6-1/2 inches. The bearings are supplied by Electromate.

G-28
Clutches Bearings
For use with extended inner ring bearing assemblies. Requires spacer between bearing inner race and Clutch
Rotor/Field Assembly to maintain armature gap.
2 ER Series Bearings
A D
C LTB
E
F
B
Minimum Hub Diameter
Customer's sprocket, sheave, etc.
drilled for drive pins with
bearings installed.
Shaft Housing Bore Min
A B LTB C D E F
308 Minimum Hub Diameter - 4-1/2"
7/8" 2.0471/2.0466 1-17/32" 3/64" 2-17/64" 1-3/8" 5/8"
15/16" 2.0471/2.0466 1-17/32" 3/64" 2-17/64" 1-3/8" 5/8"
1" 2.0471/2.0466 1-17/32" 3/64" 2-17/64" 1-3/8" 5/8"
1-1/16" 2.4408/2.4403 1-25/32" 1/16" 2-21/32" 1-19/32" 5/8"
1-1/8" 2.4408/2.4403 1-25/32" 1/16" 2-21/32" 1-19/32" 5/8"
1-3/16" 2.4408/2.4403 1-25/32" 1/16" 2-21/32" 1-19/32" 5/8"
310 Minimum Hub Diameter - 6-1/2"
1-1/4" 2.8345/2.8340 1-31/32" 1/16" 3-5/64" 1-55/64" 23/32"
1-5/16" 2.8345/2.8340 1-31/32" 1/16" 3-5/64" 1-55/64" 23/32"
1-3/8" 2.8345/2.8340 1-31/32" 1/16" 3-5/64" 1-55/64" 23/32"
1-7/16" 2.8345/2.8340 1-31/32" 1/16" 3-5/64" 1-55/64" 23/32"
1-1/2" 3.1495/3.1490 2-1/4" 1/16" 3-31/32" 2-1/6" 53/64"
1-9/16" 3.1495/3.1490 2-1/4" 1/16" 3-31/32" 2-1/6" 53/64"
1-5/8" 3.3464/3.3458 2-1/4" 1/16" 3-19/32" 2-19/64" 53/64"
1-11/16" 3.3464/3.3458 2-1/4" 1/16" 3-19/32" 2-19/64" 53/64"
1-3/4" 3.3464/3.3458 2-1/4" 1/16" 3-19/32" 2-19/64" 53/64"
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com

The KC-MC4XDZP01 mating connector kit includes connector housings and crimp pins to connect to the I/O, Feedback, and Auxiliary Feedback connectors of ADVANCED Motion Controls MC4XDZP01 mounting cards. The kit contains one 20-port housing and 20 pins for the I/O connector, one 20-port housing and 20 pins for the Feedback connector, and one 10-port housing and 10 pins for the Auxiliary Feedback connector. The contacts are crimped using Molex crimp tool number 63811-6300, which is not included.

Inertia dynamic type fsb_specsheet

Electromate

Inertia dynamics pb500fhd_specsheet

Electromate

Inertia dynamic type slb_sob_specsheet

Electromate

The document describes shaft mounted clutch/brake packages (SLB and SOB series) that are used to couple parallel or in-line shafts. The packages combine a clutch and brake (models SL or SO and FB) into a single unit for easy installation. The clutch hub accommodates a pulley, gear, or sprocket to transmit torque to the second shaft, while the brake is used to stop or hold the load. Key specifications and dimensions for selecting and ordering the SLB and SOB clutch/brake packages are provided.

International trucks

CarlosAndrsSnchezVar

Rendering automotive

Russell Cantos

This document provides technical specifications for the Spring Set Holding Brake model 305HQ including its weight, rated torque, voltage, current, mounting requirements, and replacement part numbers. The brake is a double disc, spline drive design for 90V (or 24V) and includes a rotor hub assembly and spring set holding brake that can be ordered separately. Exploded views show the individual replacement parts that are available.

Assem-Chute.PDF

Lawrence Reythen

1666 CASE IH Axial - flow combine parts catalog

PartCatalogs Net

The document provides a list of parts for a radiator and its attaching parts for a 1666 Case IH Axial-Flow Combine from 1993 to 1994. It includes the radiator, radiator cap, shroud ring and bolts, seals for the radiator to shroud and radiator to air chute, a drain valve, radiator mounting shock absorbers, bolts and nuts for attaching the radiator supports, and self-tapping screws. Part numbers and quantities are provided for each part.

7220 CASE IH Magnum tractor (North America) parts catalog

PartCatalogs Net

This document contains pictorial indexes and part numbers for hoses, tubes, and other components related to hydraulic and cooling systems for a Case IH Magnum tractor model 7220 from 1993-1996. The indexes provide images and page references for items numbered 1-18 related to main hydraulics, lubrication hydraulics, remote hydraulics, steering hydraulics for 2WD and MFD tractors, brake hydraulics, hitch hydraulics, and other systems. Separate sections provide exploded diagrams and part lists for the radiator assembly, for tractors produced before and after a specific product identification number.

9370, 9380, 9390 CASE IH 4WD tractor parts catalog

PartCatalogs Net

This document contains pictorial indexes and part numbers for various systems on Case IH 9370, 9380, and 9390 tractors from 1995-2000, including: - Main hydraulics - High output main hydraulics - Lubrication hydraulics for power shift and synchroshift transmissions - Remote hydraulics - Steering hydraulics - Electronic and manual controlled hitch hydraulics It also contains part numbers and descriptions for radiator mounting and attaching parts for 9370 and 9380 tractors.

Case 570 mxt series 3 loader landscaper parts catalogue manual

fjskeksmefmms

Automated screw thread quality checking using SMAC LAR55 actuator new produc...

Electromate

The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.

An overview of the various kinematic models in both parallel and serial robot...

Electromate

This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.

Galil motion control robotic symposium presentation-linear motion from non-li...

Electromate

The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.

Advanced motion controls robotics symposium presentation-open standard tools ...

Electromate

This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.

Maxon motor ag robotic symposium presentation-impedance control overview and ...

Electromate

The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.

Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...

Electromate

The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.

Harmonic drive llc robotics symposium presentation-designing from the inside ...

Electromate

The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.

Thomson Linear Dual Shaft Rail 2DA Modular Specs

Electromate

This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.

Thomson Linear 2DA QuickSlide System with Brake

Electromate

This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including: - It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes. - The locking mechanism does not increase load on the bearing and allows zero axial movement during locking. - It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.

Thomson Linear RoundRail 2CA Web Universal Carriage Specs

Electromate

This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.

Thomson Linear RoundRail 1VC Double End Supported Specs

Electromate

The document provides specifications for various FluoroNyliner linear guide components including: - Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter. - It lists the part numbers, dimensions, materials, weights, and other specifications for each component. - It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.

Thomson Linear RoundRail 2CA Web Flanged Carriage Specs

Electromate

Thomson Linear RoundRail Twin Shaft Web 2CA

Electromate

The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.

Thomson Linear RoundRail 1VC Double Unsupported Specs

Electromate

The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.

Thomson Linear WhisperTrak Actuators

Electromate

The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.

Thomson T-Series Profile Rail

Electromate

The document provides information on the T-Series Ball Profile Rail from Thomson, including: - It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment. - It has a low cost of installation as it can be mounted directly to non-machined bases without special tools. - It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.

What's hot

Inertia dynamics ss_holdingbk_305hq_specsheet

Electromate

Assem-Chute.PDF

Lawrence Reythen

1666 CASE IH Axial - flow combine parts catalog

PartCatalogs Net

7220 CASE IH Magnum tractor (North America) parts catalog

PartCatalogs Net

9370, 9380, 9390 CASE IH 4WD tractor parts catalog

PartCatalogs Net

Case 570 mxt series 3 loader landscaper parts catalogue manual

fjskeksmefmms

What's hot (6)

Inertia dynamics ss_holdingbk_305hq_specsheet

Assem-Chute.PDF

1666 CASE IH Axial - flow combine parts catalog

7220 CASE IH Magnum tractor (North America) parts catalog

9370, 9380, 9390 CASE IH 4WD tractor parts catalog

Case 570 mxt series 3 loader landscaper parts catalogue manual

More from Electromate

Automated screw thread quality checking using SMAC LAR55 actuator new produc...

Electromate

An overview of the various kinematic models in both parallel and serial robot...

Electromate

Galil motion control robotic symposium presentation-linear motion from non-li...

Electromate

Advanced motion controls robotics symposium presentation-open standard tools ...

Electromate

Maxon motor ag robotic symposium presentation-impedance control overview and ...

Electromate

Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...

Electromate

Harmonic drive llc robotics symposium presentation-designing from the inside ...

Electromate

Thomson Linear Dual Shaft Rail 2DA Modular Specs

Electromate

Thomson Linear 2DA QuickSlide System with Brake

Electromate

Thomson Linear RoundRail 2CA Web Universal Carriage Specs

Electromate

Thomson Linear RoundRail 1VC Double End Supported Specs

Electromate

Thomson Linear RoundRail 2CA Web Flanged Carriage Specs

Electromate

Thomson Linear RoundRail Twin Shaft Web 2CA

Electromate

Thomson Linear RoundRail 1VC Double Unsupported Specs

Electromate

Thomson Linear WhisperTrak Actuators

Electromate

Thomson T-Series Profile Rail

Electromate

Thomson Linear RoundRail Accessories Collapsable Bellows Specs

Electromate

This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.

Thomson Linear Roundrail Dual Shaft Rail 2DA Specs

Electromate

The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.

Thomson Linear RoundRail Continuous Support 1PC Specs

Electromate

This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.

Thomson Linear RoundRail Continuous Support 1PB Specs

Electromate

The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.

More from Electromate (20)

Automated screw thread quality checking using SMAC LAR55 actuator new produc...

An overview of the various kinematic models in both parallel and serial robot...

Galil motion control robotic symposium presentation-linear motion from non-li...

Advanced motion controls robotics symposium presentation-open standard tools ...

Maxon motor ag robotic symposium presentation-impedance control overview and ...

Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...

Harmonic drive llc robotics symposium presentation-designing from the inside ...

Thomson Linear Dual Shaft Rail 2DA Modular Specs

Thomson Linear 2DA QuickSlide System with Brake

Thomson Linear RoundRail 2CA Web Universal Carriage Specs

Thomson Linear RoundRail 1VC Double End Supported Specs

Thomson Linear RoundRail 2CA Web Flanged Carriage Specs

Thomson Linear RoundRail Twin Shaft Web 2CA

Thomson Linear RoundRail 1VC Double Unsupported Specs

Thomson Linear WhisperTrak Actuators

Thomson T-Series Profile Rail

Thomson Linear RoundRail Accessories Collapsable Bellows Specs

Thomson Linear Roundrail Dual Shaft Rail 2DA Specs

Thomson Linear RoundRail Continuous Support 1PC Specs

Thomson Linear RoundRail Continuous Support 1PB Specs

Recently uploaded

GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...

Neo4j

Dr. Sean Tan, Head of Data Science, Changi Airport Group Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.

Introducing Milvus Lite: Easy-to-Install, Easy-to-Use vector database for you...

Zilliz

Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!

SOFTTECHHUB

As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.

Generative AI Deep Dive: Advancing from Proof of Concept to Production

Aggregage

Monitoring Java Application Security with JDK Tools and JFR Events

Ana-Maria Mihalceanu

20 Comprehensive Checklist of Designing and Developing a Website

Pixlogix Infotech

Dive into the world of Website Designing and Developing with Pixlogix! Looking to create a stunning online presence? Look no further! Our comprehensive checklist covers everything you need to know to craft a website that stands out. From user-friendly design to seamless functionality, we've got you covered. Don't miss out on this invaluable resource! Check out our checklist now at Pixlogix and start your journey towards a captivating online presence today.

National Security Agency - NSA mobile device best practices

Quotidiano Piemontese

Climate Impact of Software Testing at Nordic Testing Days

Kari Kakkonen

My slides at Nordic Testing Days 6.6.2024 Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.

みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...

名前です男

Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf

Malak Abu Hammad

Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers: * What is Vector Search? * Importance and benefits of vector search * Practical use cases across various industries * Step-by-step implementation guide * Live demos with code snippets * Enhancing LLM capabilities with vector search * Best practices and optimization strategies Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications. #MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology

PCI PIN Basics Webinar from the Controlcase Team

ControlCase

RESUME BUILDER APPLICATION Project for students

KAMESHS29

20240605 QFM017 Machine Intelligence Reading List May 2024

Matthew Sinclair

Pushing the limits of ePRTC: 100ns holdover for 100 days

Adtran

Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...

SOFTTECHHUB

The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing. One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.

GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024

Neo4j

Securing your Kubernetes cluster_ a step-by-step guide to success !

KatiaHIMEUR1

Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster. However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks. In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.

GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...

Neo4j

Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.

Cosa hanno in comune un mattoncino Lego e la backdoor XZ?

Speck&Tech

ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune. Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile. BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).

20240607 QFM018 Elixir Reading List May 2024

Matthew Sinclair

Recently uploaded (20)

GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...

Introducing Milvus Lite: Easy-to-Install, Easy-to-Use vector database for you...

Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!

Generative AI Deep Dive: Advancing from Proof of Concept to Production

Monitoring Java Application Security with JDK Tools and JFR Events

20 Comprehensive Checklist of Designing and Developing a Website

National Security Agency - NSA mobile device best practices

Climate Impact of Software Testing at Nordic Testing Days

Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf

PCI PIN Basics Webinar from the Controlcase Team

RESUME BUILDER APPLICATION Project for students

20240605 QFM017 Machine Intelligence Reading List May 2024

Pushing the limits of ePRTC: 100ns holdover for 100 days

Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...

GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024

Securing your Kubernetes cluster_ a step-by-step guide to success !

GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...

Cosa hanno in comune un mattoncino Lego e la backdoor XZ?

20240607 QFM018 Elixir Reading List May 2024

Inertia dynamics clutch308_310_bearing_specsheet

1. G-28 Clutches Bearings For use with extended inner ring bearing assemblies. Requires spacer between bearing inner race and Clutch Rotor/Field Assembly to maintain armature gap. 2 ER Series Bearings A D C LTB E F B Minimum Hub Diameter Customer's sprocket, sheave, etc. drilled for drive pins with bearings installed. Shaft Housing Bore Min A B LTB C D E F 308 Minimum Hub Diameter - 4-1/2" 7/8" 2.0471/2.0466 1-17/32" 3/64" 2-17/64" 1-3/8" 5/8" 15/16" 2.0471/2.0466 1-17/32" 3/64" 2-17/64" 1-3/8" 5/8" 1" 2.0471/2.0466 1-17/32" 3/64" 2-17/64" 1-3/8" 5/8" 1-1/16" 2.4408/2.4403 1-25/32" 1/16" 2-21/32" 1-19/32" 5/8" 1-1/8" 2.4408/2.4403 1-25/32" 1/16" 2-21/32" 1-19/32" 5/8" 1-3/16" 2.4408/2.4403 1-25/32" 1/16" 2-21/32" 1-19/32" 5/8" 310 Minimum Hub Diameter - 6-1/2" 1-1/4" 2.8345/2.8340 1-31/32" 1/16" 3-5/64" 1-55/64" 23/32" 1-5/16" 2.8345/2.8340 1-31/32" 1/16" 3-5/64" 1-55/64" 23/32" 1-3/8" 2.8345/2.8340 1-31/32" 1/16" 3-5/64" 1-55/64" 23/32" 1-7/16" 2.8345/2.8340 1-31/32" 1/16" 3-5/64" 1-55/64" 23/32" 1-1/2" 3.1495/3.1490 2-1/4" 1/16" 3-31/32" 2-1/6" 53/64" 1-9/16" 3.1495/3.1490 2-1/4" 1/16" 3-31/32" 2-1/6" 53/64" 1-5/8" 3.3464/3.3458 2-1/4" 1/16" 3-19/32" 2-19/64" 53/64" 1-11/16" 3.3464/3.3458 2-1/4" 1/16" 3-19/32" 2-19/64" 53/64" 1-3/4" 3.3464/3.3458 2-1/4" 1/16" 3-19/32" 2-19/64" 53/64" Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com

Inertia dynamics clutch308_310_bearing_specsheet

Recommended

Recommended

More Related Content

What's hot

What's hot (6)

More from Electromate

More from Electromate (20)

Recently uploaded

Recently uploaded (20)

Inertia dynamics clutch308_310_bearing_specsheet