Siemens offers a comprehensive range of industrial steam turbines from 2 kW to 250 MW for power generation and mechanical drive applications. Their product line includes single and dual casing models suited for generator drives, compressors, pumps and other industrial processes. Siemens has over 100 years of experience in steam turbine technology with a fleet of over 20,000 installed turbines worldwide.
GE manufactures a wide range of steam turbines from small industrial units to large combined cycle and nuclear designs. They offer steam turbine products for reheat combined cycle applications, non-reheat applications, and nuclear power. Their A series steam turbines are optimized for maximum output and efficiency in combined cycle systems, incorporating advanced technologies like high-reaction drum rotors for high efficiency.
The Siemens SST-600 steam turbine is a versatile single-casing turbine that can be used for generator drives up to 150 MW or mechanical drives for applications like boiler feedwater pumps. It has a speed range of 3,000-18,000 rpm and is designed for condensing or back-pressure applications. The SST-600 provides increased efficiency and reduced start-up times compared to older models. It has been implemented successfully in hundreds of projects worldwide across various industries.
Siemens offers a comprehensive range of industrial steam turbines from 45kW to 250MW for power generation and mechanical drive applications. Their product range includes single and dual casing models suited for generator drives, mechanical drives, and complex industrial processes. Siemens has over 100 years of experience in steam turbine technology with a fleet of over 20,000 installed turbines worldwide.
Siemens offers a comprehensive range of pre-designed steam turbines up to 12 MW for a variety of industrial applications. Their product line includes 11 steam turbine models ranging from 10 kW to 12 MW in output that are suitable for applications such as power generation, mechanical drives, and combined heat and power plants. Siemens has over 100 years of experience in steam turbine technology with a fleet of over 20,000 installed turbines.
This document provides information about a 2x55 MW captive power plant including details about the steam turbine, electrical system, cooling system, and operation procedures. The plant includes two 55 MW turbines that use steam at 60 kg/cm2 and 475°C to generate electricity. The turbines are single cylinder single shaft units mounted on a common foundation with generators. Key systems described include the turbine construction, steam distribution system, condensate system, and protection systems. Startup and shutdown procedures are also outlined.
The document summarizes the manufacturing process of stator winding bars for 660 MW turbo generators at BHEL Haridwar. It discusses the 8 blocks involved in manufacturing, with Block 4 focusing on coil and insulation manufacturing. The multi-step process for manufacturing the bars includes cutting conductors, transposition, forming, brazing, insulation, impregnation, testing including nitrogen, thermal and helium tests, and finishing before dispatch for winding. BHEL Haridwar manufactures over 40% of India's electrical equipment and has extensive facilities for power equipment production.
This document discusses Siemens turbines and technologies for biomass power plants. It describes how biomass can be used as a sustainable fuel for electricity generation. Siemens offers steam and gas turbines from 75kW to over 250MW that are suitable for both industrial biomass plants and dedicated power stations. They can improve the efficiency and performance of biomass facilities. The turbines integrate well with district heating systems and combined heat and power applications.
The document provides guidelines for erecting headers in boiler pressure parts. It describes preparing the supporting structures by checking dimensions according to structural drawings and pressure parts drawings. Headers must be erected at proper locations and orientations indicated by mark numbers on drawings and components. Temporary attachments used for erection must be removed after completion. Clearance between headers and supports must be checked to allow for thermal expansion.
GE manufactures a wide range of steam turbines from small industrial units to large combined cycle and nuclear designs. They offer steam turbine products for reheat combined cycle applications, non-reheat applications, and nuclear power. Their A series steam turbines are optimized for maximum output and efficiency in combined cycle systems, incorporating advanced technologies like high-reaction drum rotors for high efficiency.
The Siemens SST-600 steam turbine is a versatile single-casing turbine that can be used for generator drives up to 150 MW or mechanical drives for applications like boiler feedwater pumps. It has a speed range of 3,000-18,000 rpm and is designed for condensing or back-pressure applications. The SST-600 provides increased efficiency and reduced start-up times compared to older models. It has been implemented successfully in hundreds of projects worldwide across various industries.
Siemens offers a comprehensive range of industrial steam turbines from 45kW to 250MW for power generation and mechanical drive applications. Their product range includes single and dual casing models suited for generator drives, mechanical drives, and complex industrial processes. Siemens has over 100 years of experience in steam turbine technology with a fleet of over 20,000 installed turbines worldwide.
Siemens offers a comprehensive range of pre-designed steam turbines up to 12 MW for a variety of industrial applications. Their product line includes 11 steam turbine models ranging from 10 kW to 12 MW in output that are suitable for applications such as power generation, mechanical drives, and combined heat and power plants. Siemens has over 100 years of experience in steam turbine technology with a fleet of over 20,000 installed turbines.
This document provides information about a 2x55 MW captive power plant including details about the steam turbine, electrical system, cooling system, and operation procedures. The plant includes two 55 MW turbines that use steam at 60 kg/cm2 and 475°C to generate electricity. The turbines are single cylinder single shaft units mounted on a common foundation with generators. Key systems described include the turbine construction, steam distribution system, condensate system, and protection systems. Startup and shutdown procedures are also outlined.
The document summarizes the manufacturing process of stator winding bars for 660 MW turbo generators at BHEL Haridwar. It discusses the 8 blocks involved in manufacturing, with Block 4 focusing on coil and insulation manufacturing. The multi-step process for manufacturing the bars includes cutting conductors, transposition, forming, brazing, insulation, impregnation, testing including nitrogen, thermal and helium tests, and finishing before dispatch for winding. BHEL Haridwar manufactures over 40% of India's electrical equipment and has extensive facilities for power equipment production.
This document discusses Siemens turbines and technologies for biomass power plants. It describes how biomass can be used as a sustainable fuel for electricity generation. Siemens offers steam and gas turbines from 75kW to over 250MW that are suitable for both industrial biomass plants and dedicated power stations. They can improve the efficiency and performance of biomass facilities. The turbines integrate well with district heating systems and combined heat and power applications.
The document provides guidelines for erecting headers in boiler pressure parts. It describes preparing the supporting structures by checking dimensions according to structural drawings and pressure parts drawings. Headers must be erected at proper locations and orientations indicated by mark numbers on drawings and components. Temporary attachments used for erection must be removed after completion. Clearance between headers and supports must be checked to allow for thermal expansion.
The document provides information on installing and operating air conditioners:
1. Air conditioners should not be installed in areas with corrosive gases and the outdoor unit should avoid direct exposure to sea breeze if installed near the shore.
2. Instructions warn to have qualified installers handle installation and to only use authorized parts.
3. Upgrading to new air conditioners can reuse existing piping, simplifying replacement and reducing costs and time needed. This allows for increased cooling capacity within the same piping dimensions.
This document provides information on LG's commercial air conditioner solutions, focusing on their smart inverter single central air conditioning (CAC) units. It highlights key benefits including energy savings of up to 22% compared to constant speed models, intelligent features like human detection and wireless control via LG ThinQ, and reliability elements such as corrosion resistance. A variety of indoor unit types are also presented, including 1 way and 4 way ceiling cassette units, ceiling concealed duct units, and floor standing units. Product lineups by capacity are shown, ranging from 9,000 to 60,000 BTU for single phase units and 30,000 to 100,000 BTU for 3 phase units.
The document provides an overview of a ball and tube mill, including its operation principle, primary air systems, motor and pumps, girth gear system, and advantages and disadvantages. It describes the mill's instrumentation, including differential pressure level measurement, noise sensor level measurement, and instrumentation in the girth gear. The level measurement works by introducing air into pipes at the bottom and top of the mill to detect pressure differences indicating the coal level. A noise sensor also indicates coal level based on the noise in the mill.
1) The Daikin Super Multi NX allows a single outdoor unit to connect with up to five indoor units, providing multi-room air conditioning.
2) It offers a variety of indoor unit models and flexible piping connections. Individual indoor units can be controlled independently.
3) Features include high energy efficiency from DC inverter technology, quiet operation, and priority room settings that allow preferential cooling for a selected room.
Spirax Sarco provides knowledge, service, products and turnkey solutions for the control and efficient use of steam, air and other industrial fluids for industrial and commercial users.
Steam Traps - All types and sizes including repair kits
Regulators - Pressure, temperature, back pressure and relief
Condensate - Pumps Electric and steam driven
Control Systems - Valves and actuators
The document provides instructions for erecting pressure parts for a conventional 250 MW boiler. It outlines the sequence and key steps, which include erecting 3850 MT of boiler structure first, lifting the boiler drum using strand jacks, then erecting the furnace and second pass from top to bottom. Seal welding and insulation are also covered. The overall goal is to assemble the 5600 MT of pressure parts components within tolerances to achieve the desired performance during operation.
This document provides an overview of the manufacturing process for 500 MW stator bars at Bharat Heavy Electricals Limited (BHEL) in Haridwar, India. BHEL is a large public sector undertaking and India's largest power equipment manufacturer. The stator bar manufacturing process involves several steps: cutting conductors to size, transposing strands, stack pressing, forming bends, pickling, brazing, water and nitrogen testing, insulation, impregnation and baking, leakage testing, and finishing including varnishing. The quality checks and tests at various stages aim to ensure the bars can withstand thermal, mechanical and electrical stresses under operating conditions in large power generators.
مضخات السحب الطرفية - أحادية المراحل LSB
تتميز المضخة بجسم قوى مغلق ومحكم لتحمل أحمال الأنابيب و هى مناسبة للعديد من السوائل مثل المياه النظيفة, قليلة التلوث, الزيوت الباردة و الساخنة, المياه المحلاة و المكثفة, المحاليل الملحية, الأحماض و المواد الحارقة كذلك تعمل بالعديد من التطبيقات مثل التطبيقات الصناعية, الأغذية و المشروبات, أنظمة الدهانات و الفلترة
http://rheoserve.com/ind_single_stage_pumps.html
This document provides information on various plumbing supply products from a company, including sump pumps, fountain pumps, effluent pumps, sewage and grinder pumps, and accessories. It lists specifications for different pump models, such as motor size, voltage, flow rate, and intended use. Graphs show pump performance curves specifying head pressure and flow.
Индустриальные редукторы серии Paramax SFC Cooling Tower Drives SumitomoArve
The document provides information about the PARAMAX SFC Series cooling tower gearbox. It includes:
1) Features such as an optimized design for cooling towers with low vibration and a flat mount design. It also has a thermally efficient design with forced cooling and low noise.
2) Selection criteria including finding the proper size based on motor size and fan speed from the selection chart.
3) Standard specifications including gear and bearing materials, seals, lubrication, and paint.
4) A selection procedure example for a 132kW motor driving a fan at 107rpm in a cooling tower application.
This document provides a summary of a presentation on ball and tube mills. It discusses the types of coal and reasons for pulverizing coal. It then describes the construction and operating principles of ball and tube mills, including their slow speed of rotation, steel ball grinding mechanism, and use of impact and attrition to pulverize coal. Maintenance practices for the mills are also summarized such as ball charging schedules and preventative maintenance procedures.
This document provides information on the NP series of sliding vane positive displacement pumps from Blackmer. It summarizes the key features and benefits of the NP pumps, including their versatility in handling various fluids, high efficiency which saves on energy costs, ability to run dry or self-prime, suitability for high viscosity fluids, long bearing life from lubrication system, and options for materials, seals, ports and flanges. It also provides specifications on flow rates, speeds, pressures and temperatures the pumps can handle for different models. Dimensional drawings and performance curves are included.
This presentation provides an overview of the manufacturing process for a 500MW turbo generator. It discusses the main components of the turbo generator including the stator frame, core, and winding as well as the rotor core and winding. It also describes the excitation system, testing procedures, cooling system, and concludes with the author's experience as an intern at the manufacturing plant.
The document discusses upgrades and replacement parts for vertical spindle roller mills used to pulverize coal for power plants. It describes new designs for rotating airports and ceramic rollers that reduce wear and maintenance needs. Other upgrades mentioned include high-chrome rollers, adjustable plungers, discharge dividers, and a variety of replacement parts. The manufacturer, Foster Wheeler, offers inspections, repairs, and upgrades to increase mill output and efficiency while lowering maintenance costs over the equipment's lifespan.
This document provides information about Talleres Félix Larrinaga, a manufacturer of gearboxes and special components for valves based in Amurrio, Spain. It was founded in 1974 and produces multi-turn and quarter-turn gearboxes along with special machined parts. The gearboxes are available in standard and customized models for applications in oil/gas, offshore, chemical and other industries. Materials include carbon steel, stainless steel, and alloys.
Siemens offers a comprehensive range of pre-designed steam turbines up to 12 MW for a variety of industrial applications. Their product line includes 11 steam turbine models ranging from 10 kW to 12 MW in output. The turbines are designed for reliability and efficiency and can be used for power generation, mechanical drives, and other industrial processes. Siemens has over 100 years of experience in steam turbine technology with a fleet of over 20,000 installed turbines.
Siemens offers a full range of pre-designed turbocompressors from 600 to 600,000 cubic meters per hour for industries such as oil and gas, chemicals, and metals. Their product line includes single-stage compressors and blowers with separate or integrated gearboxes that can be matched with steam turbines or electric drivers. Siemens has over 100 years of experience in turbomachinery and has installed over 4,000 compressors and blowers worldwide.
This document discusses replacing oxygen and acetylene cutting equipment on ships with more modern plasma cutting technology. It introduces the Hypertherm PowerMax30 Air plasma cutter, which has a built-in air compressor so no air lines are needed. This makes the equipment more portable and eliminates the costs, safety issues, and logistics of using oxygen and acetylene cylinders. It also presents the MULTIPEARL 200-4 XL inverter as a multi-process welder and the Superfire 2 torch for brazing and heating work.
Xylem provides a wide range of water handling pumps and solutions for building services applications. This includes end suction centrifugal pumps, self-priming pumps, split case pumps, inline pumps, circulators, and more. Xylem participates throughout a project from design to installation and offers product selection tools to ensure the correct pump is chosen.
The document provides information on installing and operating air conditioners:
1. Air conditioners should not be installed in areas with corrosive gases and the outdoor unit should avoid direct exposure to sea breeze if installed near the shore.
2. Instructions warn to have qualified installers handle installation and to only use authorized parts.
3. Upgrading to new air conditioners can reuse existing piping, simplifying replacement and reducing costs and time needed. This allows for increased cooling capacity within the same piping dimensions.
This document provides information on LG's commercial air conditioner solutions, focusing on their smart inverter single central air conditioning (CAC) units. It highlights key benefits including energy savings of up to 22% compared to constant speed models, intelligent features like human detection and wireless control via LG ThinQ, and reliability elements such as corrosion resistance. A variety of indoor unit types are also presented, including 1 way and 4 way ceiling cassette units, ceiling concealed duct units, and floor standing units. Product lineups by capacity are shown, ranging from 9,000 to 60,000 BTU for single phase units and 30,000 to 100,000 BTU for 3 phase units.
The document provides an overview of a ball and tube mill, including its operation principle, primary air systems, motor and pumps, girth gear system, and advantages and disadvantages. It describes the mill's instrumentation, including differential pressure level measurement, noise sensor level measurement, and instrumentation in the girth gear. The level measurement works by introducing air into pipes at the bottom and top of the mill to detect pressure differences indicating the coal level. A noise sensor also indicates coal level based on the noise in the mill.
1) The Daikin Super Multi NX allows a single outdoor unit to connect with up to five indoor units, providing multi-room air conditioning.
2) It offers a variety of indoor unit models and flexible piping connections. Individual indoor units can be controlled independently.
3) Features include high energy efficiency from DC inverter technology, quiet operation, and priority room settings that allow preferential cooling for a selected room.
Spirax Sarco provides knowledge, service, products and turnkey solutions for the control and efficient use of steam, air and other industrial fluids for industrial and commercial users.
Steam Traps - All types and sizes including repair kits
Regulators - Pressure, temperature, back pressure and relief
Condensate - Pumps Electric and steam driven
Control Systems - Valves and actuators
The document provides instructions for erecting pressure parts for a conventional 250 MW boiler. It outlines the sequence and key steps, which include erecting 3850 MT of boiler structure first, lifting the boiler drum using strand jacks, then erecting the furnace and second pass from top to bottom. Seal welding and insulation are also covered. The overall goal is to assemble the 5600 MT of pressure parts components within tolerances to achieve the desired performance during operation.
This document provides an overview of the manufacturing process for 500 MW stator bars at Bharat Heavy Electricals Limited (BHEL) in Haridwar, India. BHEL is a large public sector undertaking and India's largest power equipment manufacturer. The stator bar manufacturing process involves several steps: cutting conductors to size, transposing strands, stack pressing, forming bends, pickling, brazing, water and nitrogen testing, insulation, impregnation and baking, leakage testing, and finishing including varnishing. The quality checks and tests at various stages aim to ensure the bars can withstand thermal, mechanical and electrical stresses under operating conditions in large power generators.
مضخات السحب الطرفية - أحادية المراحل LSB
تتميز المضخة بجسم قوى مغلق ومحكم لتحمل أحمال الأنابيب و هى مناسبة للعديد من السوائل مثل المياه النظيفة, قليلة التلوث, الزيوت الباردة و الساخنة, المياه المحلاة و المكثفة, المحاليل الملحية, الأحماض و المواد الحارقة كذلك تعمل بالعديد من التطبيقات مثل التطبيقات الصناعية, الأغذية و المشروبات, أنظمة الدهانات و الفلترة
http://rheoserve.com/ind_single_stage_pumps.html
This document provides information on various plumbing supply products from a company, including sump pumps, fountain pumps, effluent pumps, sewage and grinder pumps, and accessories. It lists specifications for different pump models, such as motor size, voltage, flow rate, and intended use. Graphs show pump performance curves specifying head pressure and flow.
Индустриальные редукторы серии Paramax SFC Cooling Tower Drives SumitomoArve
The document provides information about the PARAMAX SFC Series cooling tower gearbox. It includes:
1) Features such as an optimized design for cooling towers with low vibration and a flat mount design. It also has a thermally efficient design with forced cooling and low noise.
2) Selection criteria including finding the proper size based on motor size and fan speed from the selection chart.
3) Standard specifications including gear and bearing materials, seals, lubrication, and paint.
4) A selection procedure example for a 132kW motor driving a fan at 107rpm in a cooling tower application.
This document provides a summary of a presentation on ball and tube mills. It discusses the types of coal and reasons for pulverizing coal. It then describes the construction and operating principles of ball and tube mills, including their slow speed of rotation, steel ball grinding mechanism, and use of impact and attrition to pulverize coal. Maintenance practices for the mills are also summarized such as ball charging schedules and preventative maintenance procedures.
This document provides information on the NP series of sliding vane positive displacement pumps from Blackmer. It summarizes the key features and benefits of the NP pumps, including their versatility in handling various fluids, high efficiency which saves on energy costs, ability to run dry or self-prime, suitability for high viscosity fluids, long bearing life from lubrication system, and options for materials, seals, ports and flanges. It also provides specifications on flow rates, speeds, pressures and temperatures the pumps can handle for different models. Dimensional drawings and performance curves are included.
This presentation provides an overview of the manufacturing process for a 500MW turbo generator. It discusses the main components of the turbo generator including the stator frame, core, and winding as well as the rotor core and winding. It also describes the excitation system, testing procedures, cooling system, and concludes with the author's experience as an intern at the manufacturing plant.
The document discusses upgrades and replacement parts for vertical spindle roller mills used to pulverize coal for power plants. It describes new designs for rotating airports and ceramic rollers that reduce wear and maintenance needs. Other upgrades mentioned include high-chrome rollers, adjustable plungers, discharge dividers, and a variety of replacement parts. The manufacturer, Foster Wheeler, offers inspections, repairs, and upgrades to increase mill output and efficiency while lowering maintenance costs over the equipment's lifespan.
This document provides information about Talleres Félix Larrinaga, a manufacturer of gearboxes and special components for valves based in Amurrio, Spain. It was founded in 1974 and produces multi-turn and quarter-turn gearboxes along with special machined parts. The gearboxes are available in standard and customized models for applications in oil/gas, offshore, chemical and other industries. Materials include carbon steel, stainless steel, and alloys.
Siemens offers a comprehensive range of pre-designed steam turbines up to 12 MW for a variety of industrial applications. Their product line includes 11 steam turbine models ranging from 10 kW to 12 MW in output. The turbines are designed for reliability and efficiency and can be used for power generation, mechanical drives, and other industrial processes. Siemens has over 100 years of experience in steam turbine technology with a fleet of over 20,000 installed turbines.
Siemens offers a full range of pre-designed turbocompressors from 600 to 600,000 cubic meters per hour for industries such as oil and gas, chemicals, and metals. Their product line includes single-stage compressors and blowers with separate or integrated gearboxes that can be matched with steam turbines or electric drivers. Siemens has over 100 years of experience in turbomachinery and has installed over 4,000 compressors and blowers worldwide.
This document discusses replacing oxygen and acetylene cutting equipment on ships with more modern plasma cutting technology. It introduces the Hypertherm PowerMax30 Air plasma cutter, which has a built-in air compressor so no air lines are needed. This makes the equipment more portable and eliminates the costs, safety issues, and logistics of using oxygen and acetylene cylinders. It also presents the MULTIPEARL 200-4 XL inverter as a multi-process welder and the Superfire 2 torch for brazing and heating work.
Xylem provides a wide range of water handling pumps and solutions for building services applications. This includes end suction centrifugal pumps, self-priming pumps, split case pumps, inline pumps, circulators, and more. Xylem participates throughout a project from design to installation and offers product selection tools to ensure the correct pump is chosen.
Service and Technologies for Process IndustriesJohn Crane
Our world-class rotating equipment technologies, paired with an unmatched breadth of applied engineering expertise, helps plants reduce maintenance costs, slash down time and improve reliability. When it comes to keeping your rotational equipment running 24/7, John Crane’s comprehensive range of products has you covered.
The document summarizes the key features and specifications of the MT250 Series Microturbine from Ingersoll Rand. It is a 250 kW continuous onsite electrical power generation system with integrated heat recovery. Some of its main components include a patented recuperator and combustor, as well as a synchronous generator. It can operate in grid-parallel or grid-isolated modes and meets stringent emissions regulations.
The document describes the AT-HD Heavy Duty Actuator Series from Air Torque. The series provides higher torque actuators for heavy duty applications based on a scotch yoke design. The actuators can be customized with options like travel stops, power modules, temperature ranges, materials, coatings, and manual overrides. Air Torque tests all actuators in-house to ensure quality and reliability.
Wareender Sealless Magnetic Drive Pumps Overviewwarrenderltd
This document provides an overview of Warrender's mag-drive pump range, including centrifugal, turbine, and rotary pump designs made of alloy and non-metallic materials. The company aims to provide environmentally friendly pumping solutions. The pumps feature magnetic drive couplings for zero emissions and maximum safety. Three pump designs - centrifugal, turbine, and rotary - provide complete hydraulic coverage for applications such as corrosive chemicals and demanding alloy services.
SPX Flow, under the Pneumatic Products brand, manufactures single and twin tower desiccant dryers designed to remove water vapor from natural gas. The skid mounted units also include particulate and coalescing filters that capture solid contaminants to a submicron level.
This document provides specifications for the TESCOM 44-5800 Series pressure reducing regulators. The regulators offer superior heat transfer technology and tolerance to voltage spikes and high temperatures, making them suitable for worldwide applications. Key specifications include maximum inlet/outlet pressures of 6000/500 psig, operating temperatures up to 500°F, voltage requirements of 90-125 or 190-230 VAC, and material options of 316 stainless steel, Monel, or Hastelloy. The document also includes diagrams of the regulator and flow charts illustrating its performance characteristics.
1. The document provides information on automatic swing gate solutions from a German company, including a wide range of electric gate motors, actuators, and accessories for residential and commercial swing gates.
2. It includes specifications for various gate motor models for swing gates up to 5 meters, including pneumatic, hydraulic, and electromechanical options that can operate on 24V or 230V power supplies.
3. The company offers on-site installation support across Europe and India, and products are made in Germany and Europe with advanced technology and quality materials like aluminum, stainless steel, and polymers.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
The document provides technical specifications for various axial duct fans, axial jet fans, radial jet fans, and control units. It includes dimensions, motor specifications, airflow rates, noise levels, and certifications for each fan type. It also provides examples of system scripts that control fan speeds based on sensor readings for CO, fire, temperature, and other factors. Simulation results are presented analyzing smoke spread, temperature gradients, velocities, and visibility during a car fire scenario in a parking garage.
Venus make helical gear box dealers one built on modular concept of construction conforming to gear for material handling equipment standards contact us – 9810007538. This provides economic mass production
Adicomp is a leading supplier of air and gas compression technologies and services for industrial markets around the world. It has a wide range of compressor products and services for applications like biogas, natural gas, and technical gases. Since 1998, Adicomp has established a reputation for quality, reliability, and innovation, proven by the thousands of compressor packages it has installed worldwide in diverse environments and climate conditions.
WEG’s main goal is the peace of mind of its customers. That’s why, even for the most remote places, we are there to offer the safest and most reliable solutions for the petrol and gas industries.
From energy generation or voltage increase/decrease to control and distribution, WEG offers motors, generators, transformers, medium and low voltage panels, such as drives, components and coatings with the exact specifications for your needs.
Adicomp is a leading supplier of air and gas compression technologies and services installed around the world. It offers innovative solutions for compression of gases like biogas, natural gas, and technical gases. Adicomp can design compressor stations that are weatherproof and able to operate in hazardous environments. It has numerous references for biogas and natural gas compression installations supplying power generation and cogeneration plants.
1. Industrial Steam Turbines
The comprehensive product range from 2 to 250 megawatts
Industrial Power
siemens.com/energy/steamturbines
Scan the
QR code with
the QR code
reader in
your mobile!
2. A Full Range of World-class
Industrial Steam Turbines
Whatever your need for a prime mover, Siemens can
provide you with versatile, reliable and proven indus-
trial steam turbines. A world leader in steam turbine
technology, with over 100 years of experience and
continuous development, and a fleet of more than
20,000 installed turbines, we are a prime partner for
your business.
Siemens offers a comprehensive range of steam turbines
from 45kW to 1,200MW, with the flexibility to address
the specific requirements for your application. For our
range of predesigned steam turbines with a power out-
put from 45kW up to 12MW and for large steam turbines
from 250MW to 1,200MW, we offer separate portfolio
brochures.
Our industrial steam turbines meet customer require-
ments for economic installation and operation as well as
providing excellent flexibility for complex industrial pro-
cesses. So, whether you need a generator drive for power
generation or a mechanical drive for compressors, blowers
and pumps, just talk to us and together we can select
the turbine or turboset which is optimally suited to your
needs.
Of course we strictly adhere to the guidelines laid down in
the quality standards ISO 19001 and ISO 14001. Not only
the steam turbines, but also associated field-proven hight-
ech products are available from the Siemens range. These
include generators, instrumentation and controls, as well
as auxiliary and ancillary systems.
Type Steam
parameters
up to:
SST-100 65bar, 480°C
SST-150 103bar, 505°C
SST-200 110bar, 520°C
SST-300 120bar, 520°C
SST-400 140bar, 540°C
SST-500 30bar, 400°C
SST-600 165bar, 565°C
SST-700 165bar, 585°C
SST-800 165bar, 565°C
SST-900 165bar, 585°C
Double flow
Center admission
Dual casing/reheat or non-reheat
Output (MW)
20 40 60 80 100 120 140 160 180 250
Single casing/non-reheat Dual casing/reheat
3. Industrial steam turbines
The comprehensive Siemens product range from 2 to 250 megawatts
SST-200
up to 10MW
The SST-200 is a single-casing turbine,
geared or with direct drive suited to both
generator and mechanical drives. Used for
industry and power generation applications.
Technical data
n Power output up to 10MW
n Inlet pressure up to 110bar/1595psi
n Inlet temperature up to 520°C/970°F
n Controlled extraction up to 16bar/230psi
and up to 350°C/562°F
n Bleed up to 60bar/870psi
n Exhaust pressure (back pressure)
up to 16bar/230psi
n Exhaust pressure (condensing)
up to 0.25bar/3.6psi
n Exhaust area 0.17–0.34m2
/1.8–3.7sq.ft.
Typical dimensions
Length: 4m/13.1ft.*
Width: 2m/6.5ft.*
Height: 2.5m/8.2ft.*
*turbine skid only
Features
n Back pressure/condensing type
n Package unit design
n Extensive pre-design
n High-speed, downward/upward exhaust
n Customized steam path
n Short delivery time
SST-100
up to 8.5MW
The SST-100 is a single-casing turbine,
geared for generator drive; pre-engineered
including blading as a cost-effective solu-
tion. Mainly used for industrial applications.
Technical data
n Power output up to 8.5MW
n Inlet pressure up to 65bar/945psi
n Inlet temperature up to 480°C/895°F
n Rotational speed up to 7,500rpm
n Exhaust pressure (back pressure)
up to 10bar/145psi
n Exhaust pressure (condensing)
up to 1bar/14.5psi
n Exhaust area 0.22m2
/2.4sq.ft.
Typical dimensions
Length: 8m/26ft.
Width: 3.7m/12.1ft.
Height: 3.4m/11.2ft.
Features
n Back pressure/condensing type
n Package unit design
n Radial exhaust
n Simple design, rigid rotor
n Oil system integrated in base frame
n Separate oil and steam piping
SST-150
up to 20MW
The SST-150 is a single-casing turbine, pro-
viding geared drive to a 1,500 or 1,800rpm
generator and packaged in a skid-mounted
design. For power generation, it provides
high efficiency together with a very com-
pact arrangement.
Technical data
n Power output up to 20MW
n Inlet pressure up to 103bar/1,495psi
n Inlet steam temperature up to
505°C/940°F
n Rotational speed up to 13,500rpm
n Bleed up to 25bar/365psi
n Controlled extraction up to 16bar/232psi
n Exhaust pressure (back pressure)
up to 10bar/145psi
n Exhaust pressure (condensing)
up to 0.25bar/3.6psi
n Exhaust area 0.28–1.6m2
/3.0–17.2sq.ft.
Typical dimensions
Length: 12m/39ft.
Width: 4m/13.1ft.
Height: 5m/16.4ft.
Features
n Back pressure/condensing type
n Package unit design
n Pre-engineered turbine modules,
modular peripherals
n Single controlled extraction
n Radial exhaust
n Separated oil and steam piping
4. SST-300
up to 50MW
The SST-300 is a single-casing turbine,
geared for generator drive. It has a compact
and flexible design with a high degree of
standardization. Used for power generation
applications.
Technical data
n Power output up to 50MW
n Inlet pressure 120bar/1,740psi
n Inlet temperature 540°C/1,004°F
n Rotational speed up to 12,000rpm
n Controlled extraction up to 25bar/363psi
and up to 350°C/662°F
n Bleed up to 60bar/870psi
n Exhaust pressure (back pressure)
up to 16bar/232psi
n Exhaust pressure (condensing)
up to 0.3bar/4.4psi
n Exhaust area 0.28–1.6m2
/3.0–17.2sq.ft.
Typical dimensions
Length: 12m/39ft.
Width: 4m/13.1ft.
Height: 5m/16.4ft.
Features
n Back pressure/condensing type
n Pre-engineered turbine modules,
modular peripherals
n Two controlled extractions
n Radial/axial exhaust
n Adaptive stage up to 16bar
n Package unit design
n Customized steam path
SST-400
up to 65MW
The SST-400 is a single-casing turbine,
geared for generator drive. It has a compact
and flexible design with a high degree of
standardization. Used for industry and
power generation applications.
Technical data
n Power output up to 65MW
n Inlet pressure up to 140bar/2,030psi
n Inlet temperature up to 540°C/1,004°F
n Rotational speed 3,000–8,000rpm
n Controlled extraction up to 45bar/655psi
and up to 450°C/842°F
n Bleed up to 60bar/870psi
n Exhaust pressure (back pressure)
up to 25bar/365psi
n Exhaust pressure (condensing)
up to 0.3bar/4.4psi
n Exhaust area 1.3–3.0m2
/14.0–32.5sq.ft.
Typical dimensions
Length: 18m/59ft.
Width: 8.5m/28ft.
Height: 5.5m/18ft.
Features
n Back pressure/condensing type
n Pre-engineered turbine modules,
modular peripherals
n Two controlled extractions,
radial/axial exhaust
n Adaptive stage up to 16bar
n Semi-package unit design
n Customized steam path
n Short delivery time
SST-500
up to 100MW
The SST-500 is a single-casing turbine,
geared or with direct drive. It is suited to
both generator and mechanical drives to ac-
commodate large volume flows. Typically
used as low-pressure casing in two-cylinder
applications.
Technical data
n Power output up to 100MW
n Inlet pressure up to 30bar/435psi
n Inlet temperature up to 400°C/750°F
n Rotational speed up to 15,000rpm
n Bleed up to 2, at various pressure levels
n Exhaust area 2 x 0.175–3.5m2
/
2 x 1.9–24.8sq.ft.
Typical dimensions
Length: 19m/62ft.
Width: 6m/20ft.
Height: 5m/16.4ft.
Features
n Double-flow condensing turbine
n Standard turbine modules, modular
peripherals
n Throttle-controlled
n Highly customized
n Customized steam path
5. SST-600
up to 150MW
The SST-600 is a single-casing turbine with
front admission, geared or with direct drive;
suited to both generator and mechanical
drives. Used for tailor-made applications for
most complex processes in industry and
power generation.
Technical data
n Power output up to 150MW
n Inlet pressure up to 165bar/2,393psi
n Inlet temperature up to 565°C/1,049°F
n Rotational speed 3,000–18,000rpm
n Up to 2 controlled extraction with
pressure up to 72bar/1,044psi
n Up to 7 bleeds at various pressure levels
n Exhaust pressure (back pressure) up to
72bar/1,044psi or condensing
n Exhaust area 0.2–8.0m2
/1.9–38sq.ft.
Typical dimensions
Length: 19m/62ft.
Width: 6m/20ft.
Height: 5m/16.4ft.
Features
n Back pressure/condensing type
n Standard turbine modules, modular
peripherals
n Inner casing for high steam parameters
n Second steam injection possible
n Package unit design
n Radial/axial exhaust
n Highly customized
n Customized steam path
SST-800
up to 250MW
The SST-800 is a single casing turbine
with center admission that is suitable for
condensing operation or for back-pressure
operation up to 72 bar. Used for tailor-made
applications for most complex processes in
industry and power generation.
Technical data
n Power output up to 250MW
n Inlet pressure up to 170bar/2,465psi
n Inlet temperature up to 565°C/1,049°F
n Rotational speed 3,000–5,000rpm
n Up to 2 controlled extraction with
pressure up to 65bar/943psi
n Up to 7 bleeds at various pressure levels
n Exhaust pressure (back pressure) up to
72bar/1,044psi or condensing
n Exhaust area 1.1–5.6m2
/11.8–60.3sq.ft.
Typical dimensions
Length: 20 m/66ft.
Width: 8.5 m/28ft.
Height: 6 m/20ft.
Features
n Back pressure/condensing type
n Standard turbine modules, modular
peripherals
n Inner casing for high steam parameters
n Axial/radial exhaust
n Package unit design
n Highly customized
n Customized steam path
SST-700
up to 175MW
The SST-700 is a dual-casing turbine consist-
ing of a geared HP module and LP module.
Used for power generation applications, es-
pecially in combined cycle and solar thermal
power plants. Each module can be used in-
dependently or can be combined for the op-
timal configuration.
Technical data
n Power output up to 175MW
n Inlet pressure (with reheat) up to
165bar/2,393psi
n Inlet temperature (with reheat) up to
585°C/1,085°F
n Reheat temperature up to 415°C/780°F
n Rotational speed 3,000–13,200rpm
n Controlled extraction up to 40bar/580psi
and up to 415°C/780°F
n Bleed up to 6; up to 120bar/1,740psi
n Exhaust pressure (back pressure)
up to 40bar/580psi
n Exhaust pressure (condensing)
up to 0.6bar/8.7psi
n Exhaust pressure (district heating)
up to 3bar/43psi
n Exhaust area 1.7–11m2
/18.3–118sq.ft.
Typical dimensions
Length: 22m/73ft.*
Width: 15m/59ft.*
Height: 6m/20ft.*
*including condenser
Features
n Back pressure/condensing type
n Pre-engineered turbine modules
n Parallel arrangement possible
n Proven solution for solar thermal
power plants
n Simple extraction in crossover pipe
n Axial/radial exhaust
n Reheat applications
n Customized steam path
6. SST-900
up to 250MW
The SST-900 is a single-casing turbine for
2-pole generators for power generation and
industry. SST-900 RH is a dual-casing turbine
for reheat applications.
Technical data
n Power output up to 250MW
n Inlet pressure (with reheat) up to
165bar/2,393psi
n Inlet temperature (with reheat) up to
585°C/1,085°F
n Reheat temperature up to 580°C/1,075°F
n Rotational speed 3,000–3,600rpm;
HP up to 13,200rpm (for reheat)
n Bleed up to 7; up to 60bar/870psi
n Controlled extraction up to 55bar/798psi
and up to 480°C/895°F
n Exhaust pressure (back pressure)
up to 16bar/230psi
n Exhaust pressure (condensing)
up to 0.6bar/8.7psi
n Exhaust pressure (district heating)
up to 3bar/44psi
n Exhaust area 1.7–11m2
/18.3–118sq.ft.
Typical dimensions
Length: 20.5m/67ft.*
Width: 11m/36ft.*
Height: 10m/33ft.*
*including condenser
Features
n Back pressure/condensing type
n Pre-engineered turbine modules
n Two controlled extractions
n Adaptive stage up to 16bar
n Butterfly valve up to 55bar
n Axial/radial exhaust
n Reheat applications
n Customized steam path
7. 7
SST-100 (up to 8.5MW) SST-150 (up to 20MW)
SST-200 (up to 10MW) SST-300 (up to 50MW)
SST-400 (up to 65MW) SST-500 (up to 100MW)
SST-600 (up to 150MW)
SST-800 (up to 150MW)
SST-700 (up to 175MW)
SST-900 (up to 250MW)
Fields of application
Siemens industrial steam
turbines increase the effi-
ciency of power generation
and improve the economy
of industrial applications.
Industries
Chemistry
Food Beverage
Independent power
producers
Manufacturing industries
Mines, metal and cement
plants
Oil and gas industry
Paper mills / wood-working
industry
Petrochemistry / Refineries
Smelters / Steel
Sugar and ethanol plants
Utilities and municipalities
Applications
Biomass power plants
Captive power plants
Cogeneration / CHP
Combined cycle power
plants
District heating plants
Geothermal plants
Heat-recovery
Mechanical drives
Ships / Offshore
Solar thermal plants
Waste incineration plants
Main advantages
High efficiency
High reliability / availability
Customized proven
solutions
Compact design
Simple installation and
maintenance