Since 1977, JGB has been a leading supplier of hoses and hose assemblies for commercial and military applications throughout the world. We provide solutions for Industrial, Hydraulic, Fire protection, Food, Petroleum, Oilfield, Snow Making, Paint Spray, Concrete Pumping, Aircraft Refueling and many other industries.
Industrial hose, military hose, aircraft refueling hose, concrete pumping hose, fire protection hose, food hose, hydraulic hose, industrial hose, oilfield hose, paint spray hose, petroleum hose, snow making hose.
Bls-series Double-Acting Climbing Jacks include integral tilt saddles with maximum tilt angles up to 5˚ and large base with anti-rotation rod for stability.
Kioti daedong dk901 tractor service repair manualfjskefkemms
This workshop manual provides service information for KIOTI tractors models DK651/751/801/901. It covers the tractor identification, dimensions, general precautions for assembly and maintenance, specifications, lubrication requirements, and tightening torques. The manual also includes maintenance checklists to be performed daily, every 50 hours, 100 hours, and other regular intervals. It provides detailed instructions and specifications for servicing the engine, including the fuel, air, lubrication and cooling systems, cylinder head, valves, camshaft, oil pump and other engine components.
Ammonia Plant Selection Sizing and Troubleshooting Karl Kolmetz
Ammonia is produced basically from water, air, and energy. The energy source is
usually hydrocarbons, thus providing hydrogen as well, but may also be coal or
electricity. Steam reforming of light hydrocarbons is the most efficient route, with
about 77% of world ammonia capacity being based on natural gas.
The total energy consumption for the production of ammonia in a modern steam
reforming plant is 40-50% above the thermodynamic minimum. More than half of the
excess consumption is due to compression losses. The practical minimum
consumption is assumed to be 130% of the theoretical minimum.
This guideline covers items in making an ammonia plant. Starting from the raw
material, equipment, manufacturing process and the economics of ammonia plant.
The document provides an overview of expansion joints manufactured by US Bellows including single metallic expansion joints, universal expansion joints, externally pressurized expansion joints, rectangular metallic expansion joints, thick-wall metallic expansion joints, slip-type expansion joints, hinged expansion joints, gimbal expansion joints, refractory lined expansion joints, and fabric expansion joints. It discusses bellows design, types and styles, accessories, materials, applications, cycle life, data tables, and terms of sale.
This document provides an overview of drilling fluid classifications and their major and minor functions. It discusses pneumatic, oil-based, and water-based fluid classifications. The major functions of drilling fluids include controlling subsurface pressures, transporting cuttings, and supporting and stabilizing the wellbore. Minor functions include supporting the weight of tubulars, cooling/lubricating the bit and drill string, transmitting hydraulic horsepower to the bit, assisting with wireline logging and formation evaluation. Additional benefits are minimizing formation damage, reducing corrosion, lost circulation, stuck pipe, pressure losses, and environmental impact while improving penetration rates and safety. The document also provides basic engineering calculations for properties like specific gravity, volume, capacity, pressures, weight
This document provides an overview of drilling fluid classifications and their functions. It discusses pneumatic, oil-based, and water-based fluids. The major functions of drilling fluids include controlling subsurface pressure, transporting cuttings, and supporting and stabilizing the wellbore. The document also outlines basic engineering calculations for drilling fluids, such as specific gravity, volume, capacity, pressures, weight-up and dilution calculations. It provides testing procedures for water-based and oil-based drilling fluids.
CASE CX18B MINI EXCAVATOR Service Repair Manualhdksemmme
This is the Highly Detailed factory service repair manual for theCASE CX18B MINI EXCAVATOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.CASE CX18B MINI EXCAVATOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
SECTION 1 - HOW TO USE
SECTION 2 - SAFETY RULES
SECTION 3 - PRELIMINARY
SECTION 4 - SPECIFICATION
SECTION 5 - TOOLS
SECTION 6 - STANDARD MAINTENANCE TIME TABLE
SECTION 7 - MAINTENANCE STANDARDS AND TEST PROCEDURES
SECTION 8 - HYDRAULIC SYSTEM
SECTION 9 - ELECTRICAL SYSTEM
SECTION 10 - ATTACHMENT
SECTION 11 - UPPER STRUCTURE
SECTION 12 - TRAVEL SYSTEM
SECTION 13 - TROUBLESHOOTING HYDRAULIC SYSTEM
SECTION 14 - TROUBLESHOOTING ELECTRICAL SYSTEM
SECTION 15 - TROUBLESHOOTING ENGINE
SECTION 16 - ENGINE
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveCASE CX18B MINI EXCAVATOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Bls-series Double-Acting Climbing Jacks include integral tilt saddles with maximum tilt angles up to 5˚ and large base with anti-rotation rod for stability.
Kioti daedong dk901 tractor service repair manualfjskefkemms
This workshop manual provides service information for KIOTI tractors models DK651/751/801/901. It covers the tractor identification, dimensions, general precautions for assembly and maintenance, specifications, lubrication requirements, and tightening torques. The manual also includes maintenance checklists to be performed daily, every 50 hours, 100 hours, and other regular intervals. It provides detailed instructions and specifications for servicing the engine, including the fuel, air, lubrication and cooling systems, cylinder head, valves, camshaft, oil pump and other engine components.
Ammonia Plant Selection Sizing and Troubleshooting Karl Kolmetz
Ammonia is produced basically from water, air, and energy. The energy source is
usually hydrocarbons, thus providing hydrogen as well, but may also be coal or
electricity. Steam reforming of light hydrocarbons is the most efficient route, with
about 77% of world ammonia capacity being based on natural gas.
The total energy consumption for the production of ammonia in a modern steam
reforming plant is 40-50% above the thermodynamic minimum. More than half of the
excess consumption is due to compression losses. The practical minimum
consumption is assumed to be 130% of the theoretical minimum.
This guideline covers items in making an ammonia plant. Starting from the raw
material, equipment, manufacturing process and the economics of ammonia plant.
The document provides an overview of expansion joints manufactured by US Bellows including single metallic expansion joints, universal expansion joints, externally pressurized expansion joints, rectangular metallic expansion joints, thick-wall metallic expansion joints, slip-type expansion joints, hinged expansion joints, gimbal expansion joints, refractory lined expansion joints, and fabric expansion joints. It discusses bellows design, types and styles, accessories, materials, applications, cycle life, data tables, and terms of sale.
This document provides an overview of drilling fluid classifications and their major and minor functions. It discusses pneumatic, oil-based, and water-based fluid classifications. The major functions of drilling fluids include controlling subsurface pressures, transporting cuttings, and supporting and stabilizing the wellbore. Minor functions include supporting the weight of tubulars, cooling/lubricating the bit and drill string, transmitting hydraulic horsepower to the bit, assisting with wireline logging and formation evaluation. Additional benefits are minimizing formation damage, reducing corrosion, lost circulation, stuck pipe, pressure losses, and environmental impact while improving penetration rates and safety. The document also provides basic engineering calculations for properties like specific gravity, volume, capacity, pressures, weight
This document provides an overview of drilling fluid classifications and their functions. It discusses pneumatic, oil-based, and water-based fluids. The major functions of drilling fluids include controlling subsurface pressure, transporting cuttings, and supporting and stabilizing the wellbore. The document also outlines basic engineering calculations for drilling fluids, such as specific gravity, volume, capacity, pressures, weight-up and dilution calculations. It provides testing procedures for water-based and oil-based drilling fluids.
CASE CX18B MINI EXCAVATOR Service Repair Manualhdksemmme
This is the Highly Detailed factory service repair manual for theCASE CX18B MINI EXCAVATOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.CASE CX18B MINI EXCAVATOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
SECTION 1 - HOW TO USE
SECTION 2 - SAFETY RULES
SECTION 3 - PRELIMINARY
SECTION 4 - SPECIFICATION
SECTION 5 - TOOLS
SECTION 6 - STANDARD MAINTENANCE TIME TABLE
SECTION 7 - MAINTENANCE STANDARDS AND TEST PROCEDURES
SECTION 8 - HYDRAULIC SYSTEM
SECTION 9 - ELECTRICAL SYSTEM
SECTION 10 - ATTACHMENT
SECTION 11 - UPPER STRUCTURE
SECTION 12 - TRAVEL SYSTEM
SECTION 13 - TROUBLESHOOTING HYDRAULIC SYSTEM
SECTION 14 - TROUBLESHOOTING ELECTRICAL SYSTEM
SECTION 15 - TROUBLESHOOTING ENGINE
SECTION 16 - ENGINE
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveCASE CX18B MINI EXCAVATOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
This document outlines general cautions and procedures for maintenance work. It discusses the importance of correct work, safety precautions, preparations, cautions for disassembly and reassembly, removal and installation of hydraulic equipment and piping, handling of seals, and installation of hydraulic hoses. Specific topics covered include using alignment marks, new seals and pins for reassembly, cleaning parts, releasing trapped air, checking for leaks, and preventing twisting of hoses and seals.
The warranty covers defects in material and workmanship at the time of purchase. It does not cover damage from use or modification. Top Flite's liability is limited to the original purchase price. The warranty can be changed without notice. Top Flite is not liable for damage resulting from use or assembly of the model by the customer. By using the assembled model, the customer accepts all liability.
This document provides instructions for getting started with ESPRIT 2010 CAD/CAM software. It includes sections on installing the software, accessing support resources, understanding the graphical user interface and basic functions, working with geometry and features, and examples of using ESPRIT to model parts and create machining operations for milling, turning, and wire EDM.
Komatsu wa150 6 wheel loader service repair manual (sn 80001 and up)fjsjejfksekmme
This document provides a summary of a shop manual for a wheel loader. It includes an index listing various systems of the loader that are described in the manual such as the engine and cooling system, power train, steering system, brakes, hydraulics, electrical system, and troubleshooting guides. The manual contains specifications, maintenance procedures, testing and adjusting instructions, and troubleshooting tables to diagnose issues.
This document reviews OXA β-lactamases, which are enzymes produced by bacteria that provide resistance to β-lactam antibiotics like penicillins and carbapenems. It describes several classes of OXA β-lactamases that differ in their substrate profiles and abilities to hydrolyze various antibiotics. It also discusses how OXA genes are mobilized and spread between bacteria, their global epidemiology and association with high-risk bacterial lineages.
A comprehensive training manual of dairy farming.Who wish to start dairy farming or this guide is also very useful for dairy technologist ,veterinarian or dairy farming consultant. As calf management begins before birth, a few days before the calf is born, the pregnant cow is transferred to a maternity paddock, which should be near the homestead (for closer observation), well watered and free from physical objects. The signs of imminent parturition (calving) include filling of udder with milk and is turgid, vulva swollen with a string of mucus hanging from vagina. Insemination records can also be used to estimate the expected calving date.
GC Corporation celebrated 95 years in the dental industry in 2016. The company focuses on developing innovative dental products to improve oral health and quality of life through its research and development activities. This product catalog from 2016 highlights GC's preventive, restorative, laboratory, and infection control products. It provides information on usage, benefits, and packaging for each product.
This document provides an implementation guide for Advance Steel. Key points covered include:
- Installing Advance Steel and setting the product language and content
- Installing additional languages and content packages
- Using deployments to simplify and standardize installations
- Configuring network sharing of Advance Steel databases and content
- Customizing library content, generic settings, modeling requirements, numbering, detailing setup, processes, bills of materials, and the GUI
Splunk IT Service Intelligence Sandbox GuidebookSplunk
This document provides an overview of Glass Tables in Splunk IT Service Intelligence (ITSI). Glass Tables allow services, KPIs, and health scores to be visualized in customizable dashboards. They can show technical or business-level views tailored for different user types. The document instructs users to tour example Glass Tables, including a "Business Status" table showing overall health and metrics, and an "Online Transaction Service" table displaying a customer-facing service's transaction flow, components, and critical metrics. It explains that Glass Tables are useful for visualizing complex service relationships and providing relevant insights to various roles.
This document provides instructions for touring example Glass Tables in an ITSI sandbox. It describes Glass Tables as highly customizable dashboards for visualizing ITSI services, KPIs, and health scores. Two specific Glass Tables are highlighted: 1) The "Buttercup Games Business Process" table shows the high-level business process status for context. 2) The "On Line Transaction Service" table shows a detailed customer-facing service map including transaction flows, component relationships, and critical metrics to help support personnel understand dependencies. The goal of the tour is to illustrate how Glass Tables can be tailored for different users and use cases, from executive summaries to technical deep dives.
Man marine diesel engine d0836 le401 service repair manualregdfcgvdgvf
This document contains an extensive table of contents that lists sections related to overhauling various engine systems and components. It includes sections on fuel systems, cooling systems, lubrication systems, cylinder heads, valve timing, crankshafts, pistons, attachments and service data. The document provides procedures, specifications and diagrams for maintenance, repair and overhaul of diesel engines.
Pepperl+Fuchs is the world’s leading manufacturer of intrinsically safe explosion protection and electronic sensors, supplying a wide range of products and solutions for use in hazardous areas and harsh environment applications.
Pepperl+Fuchs have over 60 years of experience as a global supplier to a wide range of industries and applications. All products are certified to a variety of international standards including the latest ATEX and IECEX guidelines, being ideally suited to a variety of applications from oil platforms to pharmaceutical plants and everything else in between.
The Walsall branded Pepperl+Fuchs hazardous area installation products are based around high quality enclosures in the increased safety, intrinsic safety and flameproof protection classes. The range provides several different options of enclosure dependant upon the project application and specification required, with a variety of sizes and materials available including stainless and mild steel, as well as glass reinforced polyester (GRP). In addition, the product range also include a wide range of lighting, signalling and emergency shutdown alarm equipment, as well as various installation accessories.
Explosion proof lighting for hazardous areas.
Walsall manufacture a wide range of luminaires for use in hazardous areas where potentially explosive gas & dust may exist. Our lighting products are explosion protected also with high levels of ingress protection.
Our range of products includes those with certification in accordance with International (IEC Ex), European (ATEX) & Russian (GOST R) standards.. Ranges include Ex de Wellglasses, Ex de Floodlights, Ex n Floodlights, Ex d fluorescents, Ex d bulkheads, Ex de fluorescents, Handlamps & inspection lighting. Zone 1 & Zone 2 lighting is a core competency of Walsall.
Case tx130 45 turbo telescopic handler service repair manualfujsjefjkskzaemm
This service manual provides information for servicing TX130-40 turbo, TX130-43 turbo, TX130-45 turbo, TX140-43 turbo, TX140-45 turbo, and TX170-45 turbo telescopic handlers. It includes sections on the engine, powershift gearbox, front axle, and other components. Technicians can use this manual to service components, troubleshoot issues, and perform repairs by following the instructions and specifications provided. The manual aims to help ensure safe and proper operation of these telescopic handlers through regular maintenance.
Chesterton is a manufacturer and distributor of mechanical packing and gasketing technologies. They provide innovative sealing solutions like pump and valve packings, live loading technology, sheet gaskets, and joint sealants for a wide range of applications. Chesterton's products offer benefits like reduced water usage, superior leakage control, high pressure and speed capabilities, and resistance to process chemicals. Their live loading technology has become a worldwide standard for long-term, low-emissions sealing. The document provides a table of contents and overview of Chesterton's product catalog, which includes sections on various packing materials, sealing systems, gaskets, and technical data sheets.
This document is a parts manual for Apache sprayers models AS715, AS1010, and AS1210 from 2010. It contains over 40 sections detailing all components of the sprayers, including frames, hydraulics, engines, transmissions, tanks, booms, and more. Each section includes diagrams, part numbers, and descriptions for easy identification of replacement parts.
This document is a parts manual for the 2008 Apache sprayer models AS710, AS1010, and AS1210. It contains detailed diagrams and descriptions of components for each model. The manual is divided into sections covering the frame, hydraulics, engine and transmission, rear axle, cooling package, and overview of each model. Precise component specifications are provided for areas such as the transmission, torque converter, clutches, differentials, and manifolds.
This document provides a table of contents for a catalog that showcases various optics, accessories, gear, and other products from Leapers, including scopes, red dot sights, mounts, bipods, stocks, magazines, lights, tools, and cases. The table of contents lists each product section or category and the page numbers associated with them. Some highlighted new products are also called out.
This document describes various vacuum pump systems from Oerlikon Leybold Vacuum. It includes systems that use oil-sealed and dry compressing fore vacuum pumps, as well as high vacuum pump systems that use turbomolecular pumps. The systems cover a range of applications from industrial coating to scientific experimentation. Details are provided on complete pump systems, individual pump models, accessories, and general information.
The document is a user manual for the AutoBox (ABX-500), an air-powered hose handling device for cleaning pipes with rotary jetting tools. The AutoBox allows a single operator to safely feed and retract hoses from outside the water blast zone during pipe cleaning operations. It can accommodate hoses from 0.56-1.75 inches in diameter and couplings up to 1.75 inches. Operators must wear appropriate personal protective equipment like visors, steel-toe boots, and gloves when using the AutoBox, which is designed to increase safety and efficiency during hands-free pipe cleaning.
The drilling fluids handbook written by Amoco. It details the various fluids that are used by the drilling and wrorkover industry and theory associated with it.
This document provides an index for parts of a 9790 Combine. It lists major assemblies, components, and groups alphabetically. It indicates which page of the publication a part number can be found. Illustrations are on the left page with descriptions on the right. Common hardware is listed indented below the corresponding item. Both text and illustrations should be referenced when ordering parts. A recommended dealer stock listing is at the end.
This document outlines general cautions and procedures for maintenance work. It discusses the importance of correct work, safety precautions, preparations, cautions for disassembly and reassembly, removal and installation of hydraulic equipment and piping, handling of seals, and installation of hydraulic hoses. Specific topics covered include using alignment marks, new seals and pins for reassembly, cleaning parts, releasing trapped air, checking for leaks, and preventing twisting of hoses and seals.
The warranty covers defects in material and workmanship at the time of purchase. It does not cover damage from use or modification. Top Flite's liability is limited to the original purchase price. The warranty can be changed without notice. Top Flite is not liable for damage resulting from use or assembly of the model by the customer. By using the assembled model, the customer accepts all liability.
This document provides instructions for getting started with ESPRIT 2010 CAD/CAM software. It includes sections on installing the software, accessing support resources, understanding the graphical user interface and basic functions, working with geometry and features, and examples of using ESPRIT to model parts and create machining operations for milling, turning, and wire EDM.
Komatsu wa150 6 wheel loader service repair manual (sn 80001 and up)fjsjejfksekmme
This document provides a summary of a shop manual for a wheel loader. It includes an index listing various systems of the loader that are described in the manual such as the engine and cooling system, power train, steering system, brakes, hydraulics, electrical system, and troubleshooting guides. The manual contains specifications, maintenance procedures, testing and adjusting instructions, and troubleshooting tables to diagnose issues.
This document reviews OXA β-lactamases, which are enzymes produced by bacteria that provide resistance to β-lactam antibiotics like penicillins and carbapenems. It describes several classes of OXA β-lactamases that differ in their substrate profiles and abilities to hydrolyze various antibiotics. It also discusses how OXA genes are mobilized and spread between bacteria, their global epidemiology and association with high-risk bacterial lineages.
A comprehensive training manual of dairy farming.Who wish to start dairy farming or this guide is also very useful for dairy technologist ,veterinarian or dairy farming consultant. As calf management begins before birth, a few days before the calf is born, the pregnant cow is transferred to a maternity paddock, which should be near the homestead (for closer observation), well watered and free from physical objects. The signs of imminent parturition (calving) include filling of udder with milk and is turgid, vulva swollen with a string of mucus hanging from vagina. Insemination records can also be used to estimate the expected calving date.
GC Corporation celebrated 95 years in the dental industry in 2016. The company focuses on developing innovative dental products to improve oral health and quality of life through its research and development activities. This product catalog from 2016 highlights GC's preventive, restorative, laboratory, and infection control products. It provides information on usage, benefits, and packaging for each product.
This document provides an implementation guide for Advance Steel. Key points covered include:
- Installing Advance Steel and setting the product language and content
- Installing additional languages and content packages
- Using deployments to simplify and standardize installations
- Configuring network sharing of Advance Steel databases and content
- Customizing library content, generic settings, modeling requirements, numbering, detailing setup, processes, bills of materials, and the GUI
Splunk IT Service Intelligence Sandbox GuidebookSplunk
This document provides an overview of Glass Tables in Splunk IT Service Intelligence (ITSI). Glass Tables allow services, KPIs, and health scores to be visualized in customizable dashboards. They can show technical or business-level views tailored for different user types. The document instructs users to tour example Glass Tables, including a "Business Status" table showing overall health and metrics, and an "Online Transaction Service" table displaying a customer-facing service's transaction flow, components, and critical metrics. It explains that Glass Tables are useful for visualizing complex service relationships and providing relevant insights to various roles.
This document provides instructions for touring example Glass Tables in an ITSI sandbox. It describes Glass Tables as highly customizable dashboards for visualizing ITSI services, KPIs, and health scores. Two specific Glass Tables are highlighted: 1) The "Buttercup Games Business Process" table shows the high-level business process status for context. 2) The "On Line Transaction Service" table shows a detailed customer-facing service map including transaction flows, component relationships, and critical metrics to help support personnel understand dependencies. The goal of the tour is to illustrate how Glass Tables can be tailored for different users and use cases, from executive summaries to technical deep dives.
Man marine diesel engine d0836 le401 service repair manualregdfcgvdgvf
This document contains an extensive table of contents that lists sections related to overhauling various engine systems and components. It includes sections on fuel systems, cooling systems, lubrication systems, cylinder heads, valve timing, crankshafts, pistons, attachments and service data. The document provides procedures, specifications and diagrams for maintenance, repair and overhaul of diesel engines.
Pepperl+Fuchs is the world’s leading manufacturer of intrinsically safe explosion protection and electronic sensors, supplying a wide range of products and solutions for use in hazardous areas and harsh environment applications.
Pepperl+Fuchs have over 60 years of experience as a global supplier to a wide range of industries and applications. All products are certified to a variety of international standards including the latest ATEX and IECEX guidelines, being ideally suited to a variety of applications from oil platforms to pharmaceutical plants and everything else in between.
The Walsall branded Pepperl+Fuchs hazardous area installation products are based around high quality enclosures in the increased safety, intrinsic safety and flameproof protection classes. The range provides several different options of enclosure dependant upon the project application and specification required, with a variety of sizes and materials available including stainless and mild steel, as well as glass reinforced polyester (GRP). In addition, the product range also include a wide range of lighting, signalling and emergency shutdown alarm equipment, as well as various installation accessories.
Explosion proof lighting for hazardous areas.
Walsall manufacture a wide range of luminaires for use in hazardous areas where potentially explosive gas & dust may exist. Our lighting products are explosion protected also with high levels of ingress protection.
Our range of products includes those with certification in accordance with International (IEC Ex), European (ATEX) & Russian (GOST R) standards.. Ranges include Ex de Wellglasses, Ex de Floodlights, Ex n Floodlights, Ex d fluorescents, Ex d bulkheads, Ex de fluorescents, Handlamps & inspection lighting. Zone 1 & Zone 2 lighting is a core competency of Walsall.
Case tx130 45 turbo telescopic handler service repair manualfujsjefjkskzaemm
This service manual provides information for servicing TX130-40 turbo, TX130-43 turbo, TX130-45 turbo, TX140-43 turbo, TX140-45 turbo, and TX170-45 turbo telescopic handlers. It includes sections on the engine, powershift gearbox, front axle, and other components. Technicians can use this manual to service components, troubleshoot issues, and perform repairs by following the instructions and specifications provided. The manual aims to help ensure safe and proper operation of these telescopic handlers through regular maintenance.
Chesterton is a manufacturer and distributor of mechanical packing and gasketing technologies. They provide innovative sealing solutions like pump and valve packings, live loading technology, sheet gaskets, and joint sealants for a wide range of applications. Chesterton's products offer benefits like reduced water usage, superior leakage control, high pressure and speed capabilities, and resistance to process chemicals. Their live loading technology has become a worldwide standard for long-term, low-emissions sealing. The document provides a table of contents and overview of Chesterton's product catalog, which includes sections on various packing materials, sealing systems, gaskets, and technical data sheets.
This document is a parts manual for Apache sprayers models AS715, AS1010, and AS1210 from 2010. It contains over 40 sections detailing all components of the sprayers, including frames, hydraulics, engines, transmissions, tanks, booms, and more. Each section includes diagrams, part numbers, and descriptions for easy identification of replacement parts.
This document is a parts manual for the 2008 Apache sprayer models AS710, AS1010, and AS1210. It contains detailed diagrams and descriptions of components for each model. The manual is divided into sections covering the frame, hydraulics, engine and transmission, rear axle, cooling package, and overview of each model. Precise component specifications are provided for areas such as the transmission, torque converter, clutches, differentials, and manifolds.
This document provides a table of contents for a catalog that showcases various optics, accessories, gear, and other products from Leapers, including scopes, red dot sights, mounts, bipods, stocks, magazines, lights, tools, and cases. The table of contents lists each product section or category and the page numbers associated with them. Some highlighted new products are also called out.
This document describes various vacuum pump systems from Oerlikon Leybold Vacuum. It includes systems that use oil-sealed and dry compressing fore vacuum pumps, as well as high vacuum pump systems that use turbomolecular pumps. The systems cover a range of applications from industrial coating to scientific experimentation. Details are provided on complete pump systems, individual pump models, accessories, and general information.
The document is a user manual for the AutoBox (ABX-500), an air-powered hose handling device for cleaning pipes with rotary jetting tools. The AutoBox allows a single operator to safely feed and retract hoses from outside the water blast zone during pipe cleaning operations. It can accommodate hoses from 0.56-1.75 inches in diameter and couplings up to 1.75 inches. Operators must wear appropriate personal protective equipment like visors, steel-toe boots, and gloves when using the AutoBox, which is designed to increase safety and efficiency during hands-free pipe cleaning.
The drilling fluids handbook written by Amoco. It details the various fluids that are used by the drilling and wrorkover industry and theory associated with it.
This document provides an index for parts of a 9790 Combine. It lists major assemblies, components, and groups alphabetically. It indicates which page of the publication a part number can be found. Illustrations are on the left page with descriptions on the right. Common hardware is listed indented below the corresponding item. Both text and illustrations should be referenced when ordering parts. A recommended dealer stock listing is at the end.
This document provides specification and application information for Carlyle 06D/E refrigeration compressors. It includes:
- An overview of features like high efficiency valving, contoured pistons, oil pumps, motors, and capacity control systems.
- Tables listing specifications for 06D/E compressors like dimensions, electrical characteristics, displacement, and compressor type.
- Drawings showing dimensions and connections for various 06D and 06E compressor models.
- Sections covering system design considerations, compressor lubrication, capacity control, motor protection, accessories, and other details.
The document is a comprehensive guide for specifying and applying Carlyle 06D/E compressors in commercial refrigeration and
This document provides specification and application information for Carlyle 06D/E refrigeration compressors. It includes:
- An overview of features like high efficiency valving, contoured pistons, oil pumps, motors, and capacity control systems.
- Tables listing specifications for 06D/E compressors like dimensions, electrical characteristics, displacement, and compressor type.
- Drawings showing dimensions and connections for various 06D and 06E compressor models.
- Sections covering system design considerations, compressor lubrication, capacity control, motor protection, accessories, and more. It provides application guidance and technical details for installing and operating these compressors.
Case ih farmall 45 tractor service repair manualjjskefkskemik
This document is a repair manual for Case IH Farmall 40, 45, and 50 tractors. It contains sections covering the engine, transmission, axles, brakes, hydraulics, steering, climate control, electrical systems, and platform. Safety precautions are provided regarding servicing and operating the tractors. Technical information includes specifications, dimensions, torque values, recommended fluids, and adjustments. Safety decals and their placements on the tractors are also defined.
Case ih farmall 50 tractor service repair manualjjskefkskemik
This document is a repair manual for Case IH Farmall 40, 45, and 50 tractors. It contains sections covering the engine, transmission, axles, brakes, hydraulics, steering, climate control, electrical systems, and platform. Safety precautions are provided regarding servicing and operating the tractors. Technical information includes specifications, dimensions, torque values, recommended fluids, and adjustments. Safety decals and their placements on the tractors are also defined.
Case ih farmall 40 tractor service repair manualfjsjekksemm
This document is a repair manual for Case IH Farmall 40, 45, and 50 tractors. It contains sections covering the engine, transmission, axles, brakes, hydraulics, steering, climate control, electrical systems, and platform. Safety precautions are provided regarding servicing and operating the tractors. Technical information includes specifications, dimensions, torque values, recommended fluids, and adjustments. Safety decals and their placements on the tractors are also defined.
Case ih farmall 40 tractor service repair manualfjskekmsemmwe
This document is a repair manual for Case IH Farmall 40, 45, and 50 tractors. It contains sections covering the engine, transmission, axles, brakes, hydraulics, steering, climate control, electrical systems, and platform. Safety information is provided, including precautions regarding servicing the tractor, operating it, and driving safely. Technical information such as specifications, dimensions, torque values, special tools, and recommended lubricants are also included.
2005 Sea Doo Rotax 1503 4-Tec Engine Service Repair Manual.pdfrte638359
The document provides procedures for performing a leak test on Rotax 1503 4-TEC engines. The test involves rotating the engine to top dead center on the compression stroke for each cylinder using a drive shaft adapter. A gauge adapter is installed in the spark plug hole and air is supplied to pressurize the combustion chamber. The amount of leakage is measured and compared to acceptable percentages. Leakage areas can be diagnosed by spraying soap and water solutions while pressurized and looking for air bubbles. Leakage over 41% indicates a need for engine repair.
2005 Sea Doo Rotax 1503 4-Tec Engine Service Repair Manual.pdffjskekmdmdme
The document provides procedures for performing a leak test on Rotax 1503 4-TEC engines. The test involves rotating the engine to top dead center on the compression stroke for each cylinder using a drive shaft adapter. A gauge adapter is installed in the spark plug hole and air is supplied to pressurize the combustion chamber. The amount of leakage is measured and compared to acceptable percentages. Leakage areas can be diagnosed by spraying soap/water solution and observing bubbles form at leaking locations like intake/exhaust valves or the cylinder.
2005 Sea Doo Rotax 1503 4-Tec Engine Service Repair Manual.pdfujfksem8dudj
This document is the 2005 engine shop manual for Rotax 1503 4-TEC engines. It provides general safety information and outlines the table of contents which includes sections on leak testing, intake/supercharger, PTO housing/magneto, lubrication system, cooling system, cylinder head, cylinder block, and technical specifications. The manual is intended as a guide for technicians familiar with BRP service procedures and includes part identification illustrations and service/repair instructions. It is important technicians have the proper tools and follow the procedures carefully.
2005 Sea Doo Rotax 1503 4-Tec Engine Service Repair Manual.pdf8fusjkkmdd3e
This document is the 2005 engine shop manual for Rotax 1503 4-TEC engines. It provides general safety information and outlines the table of contents which includes sections on leak testing, intake/supercharger, PTO housing/magneto, lubrication system, cooling system, cylinder head, cylinder block, and technical specifications. The manual is intended as a guide for technicians familiar with BRP service procedures and includes part identification illustrations and service/repair instructions for the engine systems.
2005 Sea Doo Rotax 1503 4-Tec Engine Service Repair Manual.pdffujjsekmd8du
- The document describes procedures for performing a leak test on Rotax 1503 4-TEC engines.
- The engine must be at operating temperature before beginning the test. Spark plugs and valve covers are removed for access.
- A drive shaft adapter is used to rotate the engine to top dead center on each cylinder individually. Air is supplied to the combustion chamber and leakage is measured with a gauge.
- Leakage percentages indicate the engine condition, from excellent to poor. Soap solution may be used to diagnose the source of any leaks.
Similar to Industrial & Specialty Hose Products - Eagle Brand Master Catalog (20)
Thunderblast® Sandblast Hose 2/4 Ply - Material Handling Hose - Bulk Transfer...JGB Enterprises, Inc.
Sandblast hose specifically designed for use in all abrasive blast applications and suitable for all blasting media. Thunderblast® hose features a static conductive natural rubber tube with four ply high tensile steel wire reinforcement, and an abrasion resistant SBR cover. It is available in 200 ft. rolls or 50 assemblies coupled with quick disconnects or nozzle holder ends.
1/2", 3/4", and 1" ID
-22°F to +185°F
Square Hole Ring Welded Basket Strainer. The Steel NPT Wire Basket Strainer can be fixed to suction lines or non-return valves to filter any large particles that may cause pump damage.
Pressure Wash Hose and Gun Kit - Hose Accessories. Designed for use on pressure washer machines with working pressures up to 4000 psi and temperatures up to 300°F. Comes in 100 ft. lengths.
J-FLEX specialty, medium to high pressure hydraulic hose for snow making.
High Pressure SAE 100R12 hydraulic hose for petroleum and water-based hydraulic fluid. It contains 4 spiral plies of heavy wire wrapped in alternating directions. One braid or ply of material may be used over the inner tube and/or over the wire reinforcement binding the synthetic rubber to the wire. Reinforced with four high tensile steel spirals, this hose is designed for hydraulic systems with high peak pressures and arduous operating conditions. The special synthetic cover is designed to resist hydraulic oil, weather, and abrasion. The synthetic rubber tube is resistant to mineral, vegetable, and glycol based hydraulic oils. A MSHA cover is available.
J-FLEX® 2M 2SN/SAE 100R2AT for medium to high pressure hydraulic systems in industry and agriculture. The synthetic rubber tube is resistant to hydraulic fluids, and the MSHA approved synthetic rubber cover is abrasion and ozone resistant. Various covers are available for this hose.
Medium - High Pressure Hydraulic Hose. SAE 100R16 hydraulic hose consists of 1 or 2 braids of steel-wire reinforcement, and is used for high-pressure hydraulic applications requiring high flexibility and tight bends. The cover is oil and weather resistant synthetic rubber.
This hose is designed to be used with hydraulic oils, minerals, and vegetable lubricants. It is a medium pressure hydraulic hose with various cover available. It comes standard with an anti-abrasion synthetic rubber cover.
1/4" to 1" ID
-40° to 212°F
High Peak Pressure Hydraulic Hose with Improved Flexibility. SAE 100R15 hydraulic hose is only for use with petroleum-based hydraulic fluids. The hose has multiple spiral plies of heavy wire wrapped in alternating directions. A braid or ply of material may be used over or within the inner tube and/or over the wire reinforcement to bind the wire and rubber.
This hose is compatible with biodegradable hydraulic fluids like vegetable oil as well as mineral and glycol based hydraulic fluids. It consists of an inner tube of oil-resistant special synthetic rubber, 4 or 6 spiral plies of heavy wire wrapped in nating directions, and an oil, abrasion, and weather-resistant special rubber cover. A MSHA cover is available.
3/4" to 1-1/2" ID
-40°F to +248°F (+257 °F discontinuous)
High Pressure Hydraulic Hose. SAE 100R12 hydraulic hose for petroleum and water-based hydraulic fluid. It contains 4 spiral plies of heavy wire wrapped in alternating directions. One braid or ply of material may be used over the inner tube and/or over the wire reinforcement binding the synthetic rubber to the wire.
Reinforced with four high tensile steel spirals, this hose is designed for hydraulic systems with high peak pressures and arduous operating conditions. The special synthetic cover is designed to resist hydraulic oil, weather, and abrasion. The synthetic rubber tube is resistant to mineral, vegetable, and glycol based hydraulic oils. A MSHA cover is available.
3/8" to 2" ID
-40°F to 248°F (257°F intermittent)
J-FLEX® XFlex Hose - J-FLEX® 4SH XFLEX Hydraulic Hose - Hydraulic systems with high peak pressures and arduous operating conditions needing extremely high flexibility. Due to its extreme flexibility, XFlex is perfect for use in extraordinarily tight positions. Tube: Oil-resistant synthetic rubber.
SAE 100R4 hydraulic hose with one or more plies of woven or braided textile fibers and a spiral of body wire. It is used most often for return and suction lines in low pressure and vacuum applications.
This hose is for use in low pressure hydraulic systems to return the oil to tank for reuse. It is resistant to aromatic content less than 40%. Working pressures range from 56 to 300 PSI depending on ID size. It comes in lengths up to 200 feet.
3/4" to 3" ID
-40°F to 212°F
J-FLEX 2SN5K Exceeds 100R2AT hose was developed to withstand punishing conditions such as pulsating pressures, hose flexing, and temperature fluctuations with petroleum based hydraulic fluids. A MSHA accepted cover is available for this hose cover. This has extraordinary flexibility; excellent bend radii properties; superior performance under flex-impulse conditions; exceptional long life.
Designed for low to medium pressure hydraulic systems in industry and agriculture. The synthetic rubber tube is resistant to hydraulic fluids, and the MSHA approved synthetic rubber cover is abrasion and ozone resistant. Various covers are available for this hose.
1/4" to 1" ID
-40°F to 212°F (max 248° intermittent)
Eagle Water Jetting Hose – High Pressure Water Jetting Hose - Waterblast Hose - Stripping layers from hard surfaces, strip mining and washdown applications.
Red heavy duty lay flat water discharge hose for use with higher working pressures in agricultural, quarry, mining, industrial, and construction applications. It is reinforced with two spiral plies and longitudinal synthetic cords for strength, and comes with standard short shank aluminum, malleable, or brass couplings.
1.5" to 8" ID
EAGLE VAC Hose - Special Design Abrasive Suction Hose. Special hose for high performance suction equipment for transport of dry or wet media such as mud, sand or blasting media.
Eagle UREMAT & UREMAT HD Hose - Material Handling Hose - Polyurethane Lined Hose for Abrasives Handling.
For abrasive material handling such as pellets, rocks, sands, chips, grains transfer; sand shot line, bark blow line, lawn/mulch/straw collection; industrial vacuum cleaning.
Eagle Tank® Truck 300 PSI Hose - a corrugated, oil resistant, petroleum suction & discharge hose designed for the transport off mineral oil products and fuel mixtures with up to 50% aromatic content.
2", 3", 4", 6" & 8" ID
-40°F to 180°F
Eagle Tank® Truck 150 Hose - Petroleum Hose - Petro Transfer HoseJGB Enterprises, Inc.
Eagle Tank® Truck 150 Hose - Petroleum Hose - Petro Transfer Hose. The hose is constructed of a black oil and fuel-resistant rubber tube and reinforced with synthetic textile and a twin steel wire helix for heavy-duty suction of petroleum products at 150 psi. It is for use in bulk petroleum stations, tank trucks, and in-plant oil service. The cover is abrasion, ozone, weather, heat & oil resistant.
1-1/2" to 8" ID
This document provides information on the Eagle Honey Bee Hose from JGB Enterprises for pumping, rental, construction dewatering, trash pumps, septic and wastewater handling applications. It lists specifications for polyethylene tube and rib reinforced hoses in 2-inch and 3-inch diameters with temperature ranges from -40°F to 150°F. Features highlighted include superior flexibility, remaining flexible in sub-zero temperatures, being crush resistant and easy to slide, and having leak proof cuffed ends.
Eagle Slim Hole Rotary Hose - Oilfield Drilling Hose - Rotary Drilling Hose. Specially designed for use in portable, work-over and seismograph drilling rigs, this hose is reinforced with 4 or 6 spiral wires and has a cover that is abrasion, ozone, hydrocarbon and flame resistant. The tube is oil resistant synthetic rubber. It can withstand temperatures up to 200° F (+93° C) in constant operation.
1" to 3" ID
-40°F to 200°F
Building Your Employer Brand with Social MediaLuanWise
Presented at The Global HR Summit, 6th June 2024
In this keynote, Luan Wise will provide invaluable insights to elevate your employer brand on social media platforms including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok. You'll learn how compelling content can authentically showcase your company culture, values, and employee experiences to support your talent acquisition and retention objectives. Additionally, you'll understand the power of employee advocacy to amplify reach and engagement – helping to position your organization as an employer of choice in today's competitive talent landscape.
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
Navigating the world of forex trading can be challenging, especially for beginners. To help you make an informed decision, we have comprehensively compared the best forex brokers in India for 2024. This article, reviewed by Top Forex Brokers Review, will cover featured award winners, the best forex brokers, featured offers, the best copy trading platforms, the best forex brokers for beginners, the best MetaTrader brokers, and recently updated reviews. We will focus on FP Markets, Black Bull, EightCap, IC Markets, and Octa.
How MJ Global Leads the Packaging Industry.pdfMJ Global
MJ Global's success in staying ahead of the curve in the packaging industry is a testament to its dedication to innovation, sustainability, and customer-centricity. By embracing technological advancements, leading in eco-friendly solutions, collaborating with industry leaders, and adapting to evolving consumer preferences, MJ Global continues to set new standards in the packaging sector.
How to Implement a Real Estate CRM SoftwareSalesTown
To implement a CRM for real estate, set clear goals, choose a CRM with key real estate features, and customize it to your needs. Migrate your data, train your team, and use automation to save time. Monitor performance, ensure data security, and use the CRM to enhance marketing. Regularly check its effectiveness to improve your business.
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
The 10 Most Influential Leaders Guiding Corporate Evolution, 2024.pdfthesiliconleaders
In the recent edition, The 10 Most Influential Leaders Guiding Corporate Evolution, 2024, The Silicon Leaders magazine gladly features Dejan Štancer, President of the Global Chamber of Business Leaders (GCBL), along with other leaders.
How are Lilac French Bulldogs Beauty Charming the World and Capturing Hearts....Lacey Max
“After being the most listed dog breed in the United States for 31
years in a row, the Labrador Retriever has dropped to second place
in the American Kennel Club's annual survey of the country's most
popular canines. The French Bulldog is the new top dog in the
United States as of 2022. The stylish puppy has ascended the
rankings in rapid time despite having health concerns and limited
color choices.”
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Final ank Satta Matka Dpbos Final ank Satta Matta Matka 143 Kalyan Matka Guessing Final Matka Final ank Today Matka 420 Satta Batta Satta 143 Kalyan Chart Main Bazar Chart vip Matka Guessing Dpboss 143 Guessing Kalyan night
B2B payments are rapidly changing. Find out the 5 key questions you need to be asking yourself to be sure you are mastering B2B payments today. Learn more at www.BlueSnap.com.
Top mailing list providers in the USA.pptxJeremyPeirce1
Discover the top mailing list providers in the USA, offering targeted lists, segmentation, and analytics to optimize your marketing campaigns and drive engagement.
Discover timeless style with the 2022 Vintage Roman Numerals Men's Ring. Crafted from premium stainless steel, this 6mm wide ring embodies elegance and durability. Perfect as a gift, it seamlessly blends classic Roman numeral detailing with modern sophistication, making it an ideal accessory for any occasion.
https://rb.gy/usj1a2
3. 3
Eagle Gunite 150 PSI Hose......................................................................................................................................23
WATER HOSE.........................................................................................................................................................................................24
Eagle Pump® HD 150 PSI Max Hose.....................................................................................................................24
Eagle Water Discharge 150 PSI Hose...................................................................................................................24
Eagle Nitrile® 150 PSI Layflat Hose.......................................................................................................................25
Eagle HD Nitrile Hose................................................................................................................................................26
Eagle Contractors Water Hose................................................................................................................................26
Eagle Orange/Clear Suction and Discharge Hose..........................................................................................27
Eagle Green/Clear PVC Water Suction Hose.....................................................................................................27
Eagle EPDM Suction Hose.......................................................................................................................................28
Eagle Drafting/Hard Suction Hose.......................................................................................................................28
Eagle Composite® Hose............................................................................................................................................29
Eagle Red PVC HD Discharge Hose......................................................................................................................30
Eagle FLO® Blue PVC Discharge Hose..................................................................................................................30
Eagle Flo Grey Water Discharge Hose................................................................................................................31
Eagle Mill® Hose..........................................................................................................................................................31
Eagle Water Transfer PU HD Lay Flat Hose.........................................................................................................32
Eagle Water Jetting Hose.........................................................................................................................................32
Eaglewash I...................................................................................................................................................................33
Eagleflex II.....................................................................................................................................................................33
Eaglewash Carpet Cleaning Hose.........................................................................................................................34
THUNDERBOLT®...........................................................................................................................................................34
Avalanche® 2000 II Snowmaking Hose...............................................................................................................35
EZ Kote® Paint Spray Hose.......................................................................................................................................35
SPECIALTY HOSE.......................................................................................................... 35
Dunlop Waterblast WB10, WB15, WB20..............................................................................................................36
Bauer Pipe Galvanized..............................................................................................................................................37
HDPE Pipe......................................................................................................................................................................37
Poly Tails.........................................................................................................................................................................37
HOSE FITTINGS...................................................................................................................................................................................... 38
Cam & Groove..............................................................................................................................................................38
King Combination Nipples (KCNs)........................................................................................................................39
Water Shanks................................................................................................................................................................39
Bauer Type Couplings...............................................................................................................................................40
Hammer Unions..........................................................................................................................................................42
Valves..............................................................................................................................................................................43
HOSE ACCESSORIES..................................................................................................... 43
Strainers & Screens.....................................................................................................................................................44
APPENDIX A...................................................................................................................45
4. 4 Call 315-451-2770 or visit www.jgbhose.com for more information.
PETROLEUM HOSE
Eagle Tank®
Truck 150 PSI Hose
Petro S&D
• Designed for use in tank truck, bulk petroleum stations, and in plant oil service.
Tube: Oil resistant, black conductive Nitrile (NBR)
Reinforcement: Synthetic textile and twin helix steel wire
Cover: Black, abrasion, ozone, weather, heat and oil resistant neoprene rubber
Temperature: -40°F to 180°F
Branding: EAGLE TANK® TRUCK SERVICE 150 PSI WP
Couplings: Contact JGB for proper fitting recommendation and coupling procedure.
* Full Vacuum
Part #
ID OD WP Bend Radius Weight
in in psi in lbs
009-0242-0125I 1-1/2 1.93 150 4 0.92
009-0322-0125I 2 2.48 150 7 1.10
009-0402-0150I 2-1/2 3.00 150 9 1.59
009-0482-0124I 3 3.50 150 9 1.86
009-0642-0150I 4 4.61 150 15 2.72
009-0962-0150I 6 6.69 150 26 5.21
009-1282-0150I 8 8.90 150 40 8.40
* 2", 2-1/2" meet SAE 100R4 specifications
• Designed for suction and discharge applications in truck and tank car transfer of
gasoline, oil and other petroleum-based products with up to 50% aromatic content.
Petro S&D
Eagle OILFLEX 150 PSI Tank Truck Hose
Tube: Black conductive, oil resistant Nitrile (NBR)
Reinforcement: High tensile textile cord, double steel helix.
Cover: Red corrugated – abrasion, ozone and hydrocarbon resistant.
Temperature: -40°F to 180°F
Branding: EAGLE OILFLEX 150 PSI WP
Couplings: Contact JGB for proper fitting recommendation and coupling procedure.
Part #
ID OD WP Min Bend Radius Weight
in in psi in lbs/ft
009-0243-0150I 1-1/2 1.97 150 3 0.74
009-0323-0150I 2 2.52 150 3 1.06
009-0483-0150I 3 3.54 150 4 1.85
009-0643-0150I 4 4.65 150 6 2.60
009-0963-0150I 6 6.77 150 18 6.00
009-1283-0150I 8 8.86 150 25 9.00
* Full Vacuum
Back to the Table of Contents
5. 5Call 315-451-2770 or visit www.jgbhose.com for more information.
PETROLEUM
HANDLING
Eagle Tank®
Truck 300 PSI Hose
Petro S&D
• Designed for transport of mineral oil products and fuel mixtures with aromatic content
up to 50%
Part #
ID OD WP
Min Bend
Radius
Weight
in in psi in lbs/ft
009-0322-0300I 2 2.59 300 6 1.55
009-0482-0300I 3 3.74 300 9 2.46
009-0642-0300I 4 4.92 300 13 4.25
009-0962-0300I 6 7.08 300 25 7.74
009-1282-0300I 8 9.40 300 35 13.80
* Full Vacuum
Tube: Oil resistant, black conductive Nitrile (NBR)
Reinforcement: High tensile textile cord, steel helix, crossing antistatic wires
Cover: Black corrugated - abrasion, ozone and hydrocarbon resistant neoprene
Temperature: -40°F to 180°F
Branding: EAGLE TANK® TRUCK SERVICE 300 PSI WP
Couplings: Contact JGB for proper fitting recommendation and coupling procedure.
Eagle OILVAC®
150 PSI Hose
Petro S&D
• Designed for handling crude oil, frack solutions and slurries in oilfield vacuum tank service.
• Note: For applications up to 35% aromatics. Not for use with refined petroleum products
Part #
ID OD WP Min Bend Radius Weight
in in psi in lbs/ft
009-0322-0155I 2 2.48 150 3 0.93
009-0482-0155I 3 3.46 150 4 1.73
009-0642-0155I 4 4.53 150 6 2.40
009-0962-0155I 6 6.61 150 18 4.59
009-1282-0155I 8 8.78 150 25 6.60
* Full Vacuum
Tube: Black Nitrile – PVC blend, limited oil resistance, for oil field use.
Reinforcement: High tensile textile cords; highly flexible steel helix wire.
Cover: Black SBR – abrasion, ozone, limited oil resistance.
Temperature: -22°F to 176°F
Branding: EAGLE OILVAC® 150 PSI WP
Couplings: Contact JGB for proper fitting recommendation and coupling procedure.
Back to the Table of Contents
6. 6 Call 315-451-2770 or visit www.jgbhose.com for more information.
PETROLEUM HOSE
• Designed for oil/water suction and delivery service.
• All Eagle OS&D Hose assemblies are hydrotested at 1.5 times working pressure.
• Tested following U.S.C.G. certification standards.
Eagle O.S.& D.®
Hose
Petro Dock Hose
Part # ID OD WP Bend Radius Weight*
10’ 20’ in in psi in
lbs
10’ 20’
009-0643-0010 009-0643-0020 4 5-1/2 250 19 100 176
009-0963-0010 009-0963-0020 6 7-1/2 250 29 183 265
009-1283-0010 009-1283-0020 8 9-1/2 250 38 214 368
009-1603-0010 009-1603-0020 10 11-1/2 250 48 342 540
009-1923-0010 009-1923-0020 12 13-3/4 250 48 503 732
009-2243-0010 009-2243-0020 14 15-3/4 250 68 573 845
009-2563-0010 009-2563-0020 16 17-3/4 250 78 765 1130
009-2883-0010 009-2883-0020 18 20 250 106 946 1408
* Assembled weight *FullVacuum
Tube: Oil and fuel resistant conductive nitrile (NBR), 50% Aromatics
Reinforcement: Multiple high tensile synthetic tire cords (polyester cords) with steel wire helix
Cover: Oil, weather and ozone resistant, cloth impression, black synthetic rubber
Temperature: -40°F to 194°F
Packaging: Custom skids
Couplings: Built-in pipe flanges fixed x floating (ANSI B16.5)
Lengths: 10’and 20’standard length
Safety Factor: 4:1
Branding: EAGLE OIL SERVICE S&D® CARGO 250 MAX WP #Q## MEETS USCG 33CFR 154.500
Petro S&D
• Designed for suction and discharge applications in truck and tank car transfer of gasoline,
oil and other petroleum-based products with up to 50% aromatic content.
• For use where extreme flexibility is needed in low temperature.
Eagle ARCTIC®
Oilfield 150 PSI Hose
Part #
ID OD WP Min Bend Radius Weight
in in psi in lbs
009-0326-0150IA 2 2.51 150 2 1.10
009-0486-0150IA 3 3.62 150 3 2.67
009-0646-0150IA 4 4.64 150 4 2.84
* Full Vacuum
Tube: Black conductive, oil resistant Nitrile (NBR)
Reinforcement: High tensile textile cords and highly flexible steel helix.
Cover: Blue corrugated – abrasion, ozone and hydrocarbon resistant
Temperature: -65°F to 180°F
Branding: EAGLE ARCTIC® OILFIELD 150 PSI WP
Couplings: Contact JGB for proper fitting recommendation and coupling procedure.
Back to the Table of Contents
7. 7Call 315-451-2770 or visit www.jgbhose.com for more information.
PETROLEUM
Petro Transfer
• Designed for tank truck gravity drop fuel transfer.
Tube: Polyurethane (TPU) tube
Reinforcement: Polyester fabric reinforcement, rigid PVC helix and embedded grounding wire
Temperature: -40°F to 140°F
Features
• Biofuel Compatible - Revolutionary polyurethane compound! Specially designed to handle gasoline, ethanol (Meeting ASTM D5798, D4806 or
D6751 criteria), diesel and biodiesel (Meeting ASTM D5798, D4806 or D6751 criteria) ... and still keeps all the other great features and benefits!
• Non-permeable polyurethane construction -won’t swell or become stiff like conventional TPR/rubber hoses. Long life reduces operating costs.
• Lightweight - much lighter than conventional TPR/rubber hoses.
• Superior flexibility - especially in sub-zero weather!
• “See-the-flow” construction - for visual confirmation fuel is flowing.
• Durable Construction - Designed with high tensile strength polyester yarn fabric reinforcement.
• Grounding Wire - Durable multi-strand copper wire dissipates static electricity. Physically extract wire from the rigid helix and bond to the metal
coupling (or by other means) to ground.
• Easy Slide Helix - Rigid counter clockwise helix design protects hose tube from cover wear; allows hose to slide easily over rough surfaces.
Eagle Gravity Fuel Drop (Bio-fuel) Hose
Part #
ID OD Bend Radius WP Standard Length Weight
in in in psi ft lbs/ft
009-0325-0065I 2 2.46 4 65 100 0.63
009-0485-0065I 3 3.78 6 65 100 1.20
009-0645-0065I 4 4.83 8 65 100 1.71
Eagle PU Vapor Recovery Hose
Tank Truck Vapor Recovery
• Designed for anti-static tank truck vapor recovery
Features
• Biofuel Compatible - - Revolutionary polyurethane compound! Specially designed to handle gasoline, ethanol (Meeting ASTM D5798, D4806 or
• D6751 criteria.), diesel and biodiesel (Meeting ASTM D5798, D4806 or D6751 criteria.) vapors... and still keeps all the other great features and benefits!
• Non-permeable polyurethane construction -won’t swell or become stiff like conventional TPR/rubber hoses. Long life reduces operating costs.
• Lightweight - much lighter than conventional TPR/rubber hoses.
• Superior flexibility - especially in sub-zero weather!
• “See-through” construction - for visual confirmation if fuel backs up into the vapor recovery system.
• Grounding Wire - Durable multi-strand copper wire dissipates static electricity. Physically extract wire from the rigid helix and bond to the metal
coupling (or by other means) to ground.
• Easy Slide Helix - Rigid counter clockwise helix design protects hose tube from cover wear; allows hose to slide easily over rough surfaces.
Part #
ID OD
Min. Bend
Radius
WP Standard Length Weight
in in in psi ft lbs/ft
009-0320-0001I 2 2.46 3.0 17 100 0.51
009-0480-0001I 3 3.51 3.5 11 100 0.78
009-0640-0001I 4 4.56 4.5 9 100 1.10
Application: Anti-static tank truck vapor recovery hose
Tube: Polyurethane (TPU) tube
Reinforcement: Rigid PVC helix and embedded grounding wire
Temperature: -40°F to 140°F
Back to the Table of Contents
8. 8 Call 315-451-2770 or visit www.jgbhose.com for more information.
PETROLEUM HOSE
Eagle Gravity Fuel Drop Hose
Petro Transfer
• Designed to deliver gasoline, diesel fuel, kerosene and fuels with aromatic content to 40%.
Tube: NBR/PVC tube, smooth bore with embedded Safety Ohm ground wire in the hose wall
Reinforcement: Rigid clockwise PVC helix, one braid of high tensile polyester yarn reinforcement
Temperature: -10°F to 140°F
Lengths: 100 ft lengths
Features
• ** Up to 50% lighter than conventional rubber hose.
• Higher transfer pressures.
• Easy to drag with “Go-Glide” external clockwise PVC helix.
• Safety Ohm ground wire embedded into hose wall to help prevent the build-up of static electricity.
Wire must be secured to ground to dissipate static electricity.
Part #
ID OD
Reinf Spirals
Max WP @68°F
Vacuum
@68°F
Weight Min Bend Radius
in in psi in/Hg lbs in
009-0324-0120I 2 2.68 1 70 29.9 1.13 5
009-0484-0120I 3 3.68 1 65 29.9 1.37 6
009-0644-0121I 4 4.80 1 65 29.9 2.16 8
Part #
ID OD WP Min Bend Radius Weight
in in psi in lbs
050-0102-0150 5/8 1.00 150 6.0 .37
050-0122-0150 3/4 1.13 150 6.0 .42
050-0162-0150 1 1.38 150 8.0 .57
Tube: Type C (Nitrile). Black. (RMA (Class A) High oil resistance.)
Reinforcement: Braided, high tensile steel wire.
Cover: Type J (CPE). Black.
Temperature: -40°F to 120°F (-40°C to +49°C) continuous service
Lengths: Up to 500 feet. (Custom lengths made to order.)
Branding: EAGLEFLO HARDWALL GASOLINE HOSE
Couplings: Contact JGB for proper fitting recommendation and coupling procedure.
• Dispensing of all types of commercial gasolines, or other petroleum based products, from service station pumps.
• A heavy duty hardwall hose which does not collapse in reel use or behind the nozzle in heavy duty service.
Petro Transfer
Eagleflo Hardwall Gasoline / Curb Pump Hose
PETROLEUM HOSE
Back to the Table of Contents
9. AIR
9Call 315-451-2770 or visit www.jgbhose.com for more information.
AIR HOSE
• Robust air hose for heavy duty applications in heavy industry, construction and mining.
Eagle Air® Textile Hose
Air
Tube: Blend of synthetic elastomer compound, black, smooth, suitable for water and
air, resistant to oil mist
Reinforcement: High tensile textile cord
Cover: Synthetic elastomer compound, yellow, smooth with cloth impression, weather,
ozone and abrasion resistant
Temperature: -22°F to 185°F
Branding: EAGLE AIR® 300 PSI MAX WP
Lengths: 100 ft.
Features
• Robust, long lasting
Part #
ID OD Max WP Burst Pressure Weight
in in psi psi lbs/ft
001-0243-0300I 1-1/2 2.04 300 900 1.01
001-0323-0300I 2 2.56 300 900 1.42
001-0403-0300I 2-1/2 3.23 300 900 1.94
001-0483-0300I 3 3.62 300 900 2.35
001-0640-0300I 4 4.88 300 900 3.56
• Designed as heavy duty air hose for use in mines, construction and industrial applications where
maximum service is required.
Eagle Air® Wire Reinforced Hose
Air
Part #
ID OD
Plies
WP Burst Pressure Bend Radius Weight
in in psi psi in lbs/ft
003-0323-0600I 2 2.60 2 600 2400 8 1.69
003-0483-0600I 3 3.70 2 600 2400 15 3.02
003-0640-0500I 4 4.80 2 600 2400 20 4.54
003-0963-0600I 6 7.12 2 600 2400 37 8.03
Tube: Blend of synthetic elastomer compound, black, smooth, suitable for water and
air, resistant to oil mist
Reinforcement: Steel wire reinforcement
Cover: Synthetic elastomer compound, yellow, smooth with cloth impression,
weather, ozone and abrasion resistant
Temperature: -22°F to 200°F
Branding: EAGLE AIR® 600 PSI MAX WP
Lengths: 100 ft.
Features
• High safety against bursting, robust, long lasting
Back to the Table of Contents
10. 10 Call 315-451-2770 or visit www.jgbhose.com for more information.
AIR HOSE
Eagle Air® Jackhammer Hose
Air
• Designed for connection to pneumatic tools.
• Eagle Air ®comes in red or yellow
• Pre-assembled in 3/4” x 50” size
• Coupled with universal couplings
Part # Color
ID OD WP Burst Pressure Standard Length
Reinforcement Spiral
in mm psi psi ft
001-0121-0050I Red 3/4 29.5 300 900 50 2
001-0123-0050I Yellow 3/4 29.5 300 900 50 2
Tube: SBR + NR
Reinforcement: Spiral Polyester Yarn
Cover: EPDM
Temperature: -22°F to 176°F
Branding: 3/4”Eagle Air® JH 300PSI MAX WP #Q##
Packaging: 50 ft. length each with PVC film
Couplings: Universal fitting at both ends
Color: Red, Yellow
Oil Resistance: Limited
Eagle Shop Air Hose
Air
• Air compressor hose.
Part #
ID OD WP Burst Pressure Standard Length
in mm psi psi ft
001-0061-0050I 3/8 16.5 300 900 50
Tube: SBR + NR
Reinforcement: 2 Spiral Polyester Yarn
Cover: EPDM
Temperature: -22°F to 176°F
Branding: 3/8”EAGLE AIR® 300 PSI MAX WP #Q##
Packaging: 50 ft. length each with shrink film
Couplings: 1/4 NPT x 18 fitting at both ends
Color: Red
Oil Resistance: Limited
Back to the Table of Contents
11. 11 Call 315-451-2770 or visit www.jgbhose.com for more information.
HYDRAULIC
HYDRAULIC HOSE
J-FLEX® 2M 2SN/SAE 100R2AT Hose
Hydraulic
• Designed for medium-high pressure hydraulic systems in industry and agriculture.
Tube: Synthetic rubber, resistant against hydraulic fluids
Reinforcement: Two braids of high tensile steel wire
MSHA Approved Cover: Abrasion and ozone resistant synthetic rubber.
Note: various covers available. Blue cover available
Temperature: -40°F to 212°F (max 248°F intermittent)
Branding: J-FLEX® 2M SAE 100RAT / 2SN EN 853 2395 PSI
Part #
ID OD WP Burst Bend Radius Weight
in in psi psi in lbs/ft
172-1004-5800IM 1/4 0.57 5800 23200 3.93 0.210
172-1006-4800IM 3/8 0.72 4800 19200 5.11 0.300
172-1008-4000IM 1/2 0.84 4000 16000 7.08 0.360
*172-1008-5000IM 1 1/2 0.87 5000 4-to-1 safety factor 6.0 0.36
172-1010-3625IM 5/8 0.97 3625 15000 7.87 0.440
172-1012-3120IM 3/4 1.13 3120 12480 9.44 0.560
172-1016-2400IM 1 1.46 2400 9600 11.81 0.830
172-1020-1815IM 1 1/4 1.86 1815 7260 16.53 1.19
172-1024-1305IM 1 1/2 2.11 1305 5220 19.68 1.46
172-1032-1160IM 2 2.63 1160 4640 24.80 1.88
J-FLEX® 1 1SN/SAE 100R1AT Hose
Hydraulic
• Designed for low-medium pressure hydraulic systems in industry and agriculture.
Part #
ID OD WP Burst Bend Radius Weight
in in psi psi in lbs/ft
171-1003-3625IM* 3/16 0.45 3625 15950 3.54 0.120
171-1004-3265I 1/4 0.52 3265 13060 3.93 0.130
171-1006-2610IM* 3/8 0.67 2610 10440 5.11 0.190
171-1008-2320I 1/2 0.8 2320 9280 7.08 0.240
171-1012-1525I 3/4 1.08 1525 6100 9.44 0.380
171-1016-1275I 1 1.39 1275 5100 11.81 0.560
Tube: Synthetic rubber, resistant against hydraulic fluids
Reinforcement: One braid of high tensile steel wire
Cover: Abrasion and ozone resistant synthetic rubber. Note: various covers available
Temperature: -40°F to 212°F (max 248°F intermittent)
Branding: J-FLEX® 1 SAE 100RAT / 1SN EN 853 1525 PSI
* Includes MSHA cover
* Double wire braid1 J-FLEX® 2SN5K EXCEEDS SAE 100R2AT / 2SN EN 853
Back to the Table of Contents
12. HYDRAULIC HOSE
12 Call 315-451-2770 or visit www.jgbhose.com for more information.
J-FLEX® 17 SAE 100R17 Hose
Hydraulic
• Designed for medium pressure hydraulic systems in industry and agriculture.
Tube: Synthetic rubber, resistant against hydraulic fluids
Reinforcement: One braid DN 06 – DN 12 and two braids DN 16 – DN 25 of high
tensile steel wire
Cover: Abrasion and ozone resistant synthetic rubber. Note: various covers
available.
Temperature: -40°F to 212°F (max 248°F intermittent)
Branding: J-FLEX® 17 SAE 100R17
Part #
ID OD WP Burst Bend Radius Weight
in in psi psi in lbs/ft
171-1004-3000I 1/4 0.49 3000 12000 2.0 0.110
171-1006-3000I 3/8 0.63 3000 12000 2.5 0.180
171-1008-3000I 1/2 0.77 3000 12000 3.5 0.260
172-1012-3000I 3/4 1.08 3000 12000 4.7 0.510
172-1016-3000I 1 1.43 3000 12000 5.9 0.850
J-FLEX® 16 SAE 100R16 Hose
Hydraulic
• Designed for medium-high pressure hydraulic systems using hydraulic oils, minerals, and vegetable
lubricants.
Tube: Synthetic rubber, resistant against hydraulic fluids.
Reinforcement: Two braids of high tensile steel wire.
Cover: Abrasion resistant synthetic rubber.
Temperature: -40°F to 212°F (max 248°F intermittent)
Branding: J-FLEX® 16 SAE 100R16
Part #
ID OD WP Burst Bend Radius Weight
in in psi psi in lbs/ft
172-5004-5000I 1/4 0.57 5800 23200 1.97 0.17
172-5006-4000I 3/8 0.74 4780 19120 2.56 0.27
172-5008-3500I 1/2 0.86 3980 15920 3.54 0.34
172-5012-2250I 3/4 1.14 3110 12440 4.72 0.50
172-5016-2000I 1 1.44 2390 9560 5.90 0.74
Back to the Table of Contents
13. HYDRAULIC
13Call 315-451-2770 or visit www.jgbhose.com for more information.
J-FLEX® 12M SAE 100R12 Hose
Hydraulic
• Designed for hydraulic systems with high peak pressures and arduous operating conditions.
Part #
ID OD WP Burst Bend Radius Weight
in in psi psi in lbs/ft
182-7006-4000IM 3/8 0.80 4000 16000 3.94 0.440
182-7008-4000IM 1/2 0.93 4000 16000 4.92 0.560
182-7012-4000IM 3/4 1.20 4000 16000 5.90 0.840
182-7016-4000IM 1 1.50 4000 16000 8.86 1.250
182-7020-3000IM 1 1/4 1.83 3000 12000 9.84 1.71
182-7024-2500IM 1 1/2 2.09 2500 10000 19.69 2.12
182-7032-2500IM 2 2.62 2500 10000 25.59 2.66
Tube: Mineral, vegetable, and glycol based hydraulic oil resistant special
synthetic rubber
Reinforcement: 4 high tensile steel spiral
MSHA Approved Cover: Hydraulic oil, abrasion and weather resistant special synthetic rubber
Temperature: -40°F to 248°F (257°F intermittent)
Branding: J-FLEX® 12M SAE 100R12
High Peak Pressure Hydraulic
J-FLEX® 13M SAE 100R13 Hose
• Designed for hydraulic systems with high peak pressures and arduous operating conditions
(pulsing, flexing)
Tube: Nitrile; Mineral, vegetable, BIO OIL, and glycol based hydraulic oil
resistant
Reinforcement: 4 or 6 high tensile steel spiral
MSHA Fire Resistant Cover: Abrasion, ozone, hydrocarbon resistant special synthetic rubber
Temperature: -40° F to 250° F
Part #
ID OD WP Burst Bend Radius Weight
in in psi psi in lbs/ft
182-9012-5000IM 3/4 1.22 5500 22000 5.9 0.83
182-9016-5000IM 1 1.51 5500 22000 7.1 1.13
182-9024-5000IM 1-1/2 2.22 5000 20000 19.7 3.00
182-9032-5000IM 2 2.76 5000 20000 21.7 4.20
* For 1-1/4”refer to 15M SAE 100R15 182-5020-6000IM
Back to the Table of Contents
14. HYDRAULIC HOSE
14 Call 315-451-2770 or visit www.jgbhose.com for more information.
J-FLEX® 4SH XFLEX Hydraulic Hose
Hydraulic
• Designed specially for use in hydraulic systems with high peak pressures and arduous operating
conditions needing extremely high flexibility. Due to its extreme flexibility, XFlex is perfect for use in
extraordinarily tight positions.
Part #
ID OD Bend Radius WP Burst Pressure Weight
in in in psi psi lbs/ft
182-4020-5100IM 1-1/4 1.78 14.0 5,075 20,300 1.68
182-4024-4200IM 1-1/2 2.08 20.0 4,205 16.820 2.08
182-4032-3625IM 2 2.66 25.0 3,625 14,790 2.92
Tube: Oil resistant synthetic rubber.
Reinforcement: 4 high tensile steel spirals
Cover: Black MSHA, made of synthetic rubber, resistant to oil and weather conditions
Temperature: -40°F to 248°F (257°F intermittent)
Couplings: Contact JGB for proper fitting recommendation and coupling procedure.
Branding: J-FLEX® DIN EN 856 4SH XFlex 6150 PSI/424 BAR MAX WP MSHA
J-FLEX® 15M SAE 100R15 Hose
High Peak Pressure Hydraulic
• Designed for hydraulic systems with high peak pressures and arduous operating conditions
(pulsing, flexing).
Tube: Nitrile; Mineral, vegetable, BIO OIL, and glycol based
hydraulic oil resistant
Reinforcement: 4 or 6 high tensile steel spiral
MSHA Fire Resistant Cover: Abrasion, ozone, hydrocarbon resistant special synthetic rubber
Temperature: -40°F to 250°F
Part #
ID OD WP Burst Bend Radius Weight
in in psi psi in lbs/ft
182-9012-5000IM 3/4 1.22 5500 22000 5.9 0.83
182-9016-5000IM 1 1.51 5500 22000 7.1 1.13
182-9024-5000IM 1-1/2 2.22 5000 20000 19.7 3.00
182-9032-5000IM 2 2.76 5000 20000 21.7 4.20
Back to the Table of Contents
15. HYDRAULIC
15Call 315-451-2770 or visit www.jgbhose.com for more information.
Part #
ID OD WP Burst Bend Radius Weight
in in psi psi in lbs/ft
172-1024-2350IM 1.5 1.96 2350 7200 16.9 1.6
J-FLEX® HOT OIL 2SC Hose
Hydraulic
• Designed for use as a high temperature oil hose.
Tube: Black, oil resistant synthetic rubber.
Reinforcement: Two high tensile steel braids.
Cover: Black MSHA - abrasion, oil and weather resistant synthetic rubber. (Blue MSHA cover available on request)
Temperature: -40°F to 275°F (+300°F intermittent)
Branding: 1-1/2 -24 J-FLEX® HOT OIL 2350 PSI WP
Couplings: Contact JGB for proper fitting recommendation and coupling procedure.
J-FLEX® 10K Jack Hose
Hydraulic
• Designed for hydraulic jack applications.
Part #
ID OD Max WP Bend Radius Test Pressure Burst Pressure Weight
in in psi in psi psi lbs/ft
172-8004-1000I 1/4 0.59 10,000 4 12,000 20,000 0.20
172-8006-1000I 3/8 0.75 10,000 5 12,000 20,000 0.34
Tube: Oil resistant synthetic rubber
Reinforcement: Two braids of high tensile steel wire.
Cover: MSHA, abrasion and weather resistant synthetic rubber
Temperature: -40°F to 212°F depending on the medium
Branding: J-FLEX® 10K JACK HOSE 10,000PSI WP / 20,000PSI BP MSHA
Couplings: Contact JGB for proper fitting recommendation and coupling procedure.
Back to the Table of Contents
16. 16 Call 315-451-2770 or visit www.jgbhose.com for more information.16
HYDRAULIC HOSE
J-FLEX® 4 SAE 100R4 Hose
Hydraulic
• Designed for use in hydrailic systems to return the oil to tank for reuse.
• Resistant to aromatic content 40%
Tube: Blend of synthetic elastomers for ozone, oil and abrasion resistant, black,
smooth
Reinforcement: High tensile textile cord, steel wire helix embedded
Cover: Blend of synthetic elastomer compound, black, anti-static, smooth with cloth
impression, high oil, heat, abrasion, weather and ozone resistant
Temperature: -40°F to 212°F
Branding: J-FLEX® 4 SAE 100R4
Standard Notice: SAE 100R4
Part #
ID OD WP Burst Bend Radius Weight
in in psi psi in lbs/ft
174-4012-0300 3/4 1.26 300 1200 2.99 0.47
174-4016-0250 1 1.49 250 1000 3.94 0.60
174-4020-0200 1 1/4 1.77 200 800 5.04 0.97
174-4024-0150 1 1/2 2.05 150 600 5.98 1.14
J-FLEX® 7 SAE 100R7 Hose
Hydraulic
• Designed for medium pressure hydraulic use.
Tube: Thermoplastic polyester
Reinforcement: Polyester fiber
Cover: Anti-abrasion polyurethane stabilized to UV rays and resistant to
micro-organisms.
Temperature: Utilization -40°F / 212°F / Max Working of air, water, and fluids containing water 158°F
Branding: J-FLEX® 7 SAE 100R7 2750 PSI
Vacuum Rating: -13.5 psi; 27.5 inch Hg
These hoses meet or exceed standards SAE J517 sec. SAE 100R7 - EN 855 - ISO 3949
Part #
ID OD WP Burst Bend Radius
in in psi psi in
177-5004-2750I 1/4 0.46 2750 11000 1.38
177-5006-2250I 3/8 0.63 2250 9000 2.17
177-5008-2025I* 1/2 0.80 2025 8100 2.95
* Stock Option
NOTE: For pneumatic or gaseous systems, use perforated (pin-pricked) hose.
Back to the Table of Contents
17. 17Call 315-451-2770 or visit www.jgbhose.com for more information.
CHEMICAL
17
CHEMICAL HOSECHEMICAL HOSE
Chemical SD
Eaglechem® UHMW Chemical Suction Discharge Hose
• Designed for almost every common industrial chemical used in chemical transfer applications today.
• Non-staining UHMW tube
• Not for steam service
• Can be open end steam cleaned
Part #
ID OD
Plies
WP Vacuum MBR Weight
in in psi HG in lbs/ft
006-0129-0240I 3/4 1.19 2 240 29 3.5 0.58
006-0166-0240I 1 1.47 2 240 29 4 0.63
006-0246-0240I 1-1/2 2.08 2 240 29 4 1.06
006-0326-0240I 2 2.58 2 240 29 6 1.33
006-0406-0240I 2-1/2 3.03 2 240 29 10 1.78
006-0480-0240I 3 3.61 2 240 29 16 2.12
006-0646-0240I 4 4.61 2 240 29 24 2.83
Tube: Clear Ultra High Molecular Weight polyethylene
Reinforcement: Multiple plies of high tensile textile with dual helix.
Cover: Green abrasion resistant green EPDM (Available in red, blue, yellow black and grey, white and orange - with 400 ft
order)
Temperature: -40°F to 212°F (250°F Intermittent)
Branding: EAGLECHEM® UHMWPE CHEMICAL TRANSFER 240 PSI MAX WP
Lengths: 100ft.
Back to the Table of Contents
18. 18 Call 315-451-2770 or visit www.jgbhose.com for more information.
MATERIAL HANDLING HOSE
THUNDERBLAST® Sandblast Hose 2/4 Ply
Abrasives
• Designed for for use in all abrasive blast applications, suitable for all
commonly used blasting media
Part #
ID OD
Plies
WP Weight
in in psi lbs/ft
011-2082-0150/ 011-4082-0150 1/2 1-1/16 /1-3/16 2/4 150/150 .36 /.38
011-2120-0150 / 011-2122-0150 3/4 1-5/16 /1-1/2 2/4 175/150 .48 /.69
011-2162-0151/011-4162-0150 1 1-1/2 /1-7/8 2/4 175/150 .78/1.03
011-2202-0175/011-4202-0150 1-1/4 1-7/8 /2-5/32 2/4 175/150 .83/1.23
011-4242-0150 1-1/2 2-3/8 4 150 1.33
011-0322-0150I 2 2-7/8 4 150 1.66
Features:
• With black high abrasion, static conductive natural rubber tube
• Black abrasion resistant cover with green layline
• All sizes rated to 150 PSI MIN WP
• Bulk hose available in 200 foot lengths
Tube: Black Static Conductive Natural Rubber
4ply: ½”- ¾”ID have ¼”tube thickness, 1”- 2”ID have 5/16”tube thickness
2ply: All sizes, ¼”tube thickness
Reinforcement: High Tensile Textile Plies
Cover: Black Abrasion Resistant SBR
Temperature: -40°F to 185°F (-40°C to 85°C)
Branding: THUNDERBLAST® 4 PLY 150 PSI WP
Standards: • EN ISO 3861
• Abrasion loss Value: According to DIN 53516 ≤ 60 mm3
Eagle Flexcrete Mortar TPU Hose
Concrete Boom Hose
• Designed as a lay-flat boom tip hose ideal for ICF forms, columns and tall
walls where space is at a minimum.
Part #
ID Wall WP Burst Tensile Strength Weight
in in psi psi x1000 lbs tons lbs/in
008-0643-1250I 4 0.17 1250 2500 172 80 1.34
008-0803-1250I 5 0.17 1250 2500 179 81.5 1.48
Tube: Extruded thermoplastic polyether based polyurethane (TPU)
Reinforcement: Circular woven Aramid Fiber,“extra-strong yarn”
Cover: Extruded TPU Yellow cover
Branding: EAGLE FLEXCRETE MORTAR TPU 1250 PSI WP
Standard Coupling: 1-Piece High Pressure Rapid Crimp, Heavy Duty
Features:
• Meets/Exceeds ASME Requirements
• 1/3 the weight
• Operator Friendly
• More consistant flow at lower placement rates
• Ease of pour in tight areas
• Bright color for visibility and safety
• Superior resistance to weather and aging
• Cleans up easily
Back to the Table of Contents
19. MATERIAL
HANDLING
19Call 315-451-2770 or visit www.jgbhose.com for more information.
Eaglecrete® 1233 Hose
Plaster, Grout Shotcrete
Part #
ID OD
Plies
WP Burst Weight
in in psi psi lbs/ft
060-0242-1000 1 ½ 2.20 4 1233 2465 1.07
060-0322-0800 2 2.76 4 1233 2465 1.43
060-0402-1000 2 ½ 3.31 4 1233 2465 1.96
060-0482-1000 3 4.01 6 1233 2465 2.72
060-0562-1000 3 ½ 4.64 6 1233 2465 3.51
060-0642-1000 4 5.12 6 1233 2465 3.96
060-0802-1000 5 6.10 6 1233 2465 4.90
Tube: Black Conductive Natural Rubber Abrasion loss Value: According to DIN 53516 ≤ 60 mm3
Cover: NR/SBR Blend
Reinforcement: Spiral Textile
Couplings: Heavy Duty, Vic, NPT and Metric Mtl Hardness: Rockwell C Scale 60 +/- 2
Temperature: -40°F to 180°F
Branding: EAGLECRETE® 1233 PSI WP
• Designed as a 1233 psi cement concrete material handling hose
Cement
Eaglecrete® 1300 Hose
Part #
ID OD
Plies
WP Burst Weight
in in psi psi lbs/ft
060-0322-1300 2 2.76 2 1300 2900 2.04
060-0402-1300 2 ½ 3.46 4 1300 2600 3.01
060-0482-1300 3 4.02 4 1300 2600 3.67
060-4692-1300 4 5.12 4 1300 2600 5.69
060-4802-1300 5 6.10 4 1300 2600 6.47
• Designed as a 1300 psi cement concrete material handling hose
Tube: Black Conductive Natural Rubber Abrasion loss Value: According to DIN 53516 ≤ 60 mm3
Cover: NR/SBR Blend
Reinforcement: Spiral Wire
Couplings: Heavy Duty, Vic, NPT and Metric Mtl Hardness: Rockwell C Scale 60 +/- 2
Temperature: -40°F to 180°F
Branding: EAGLECRETE® 1300 PSI WP
Back to the Table of Contents
20. MATERIAL HANDLING HOSE
20 Call 315-451-2770 or visit www.jgbhose.com for more information.
Eagle Hot Air® Blower Hose
Blower Hose
• Designed for conveying of hot air from blower or compressor to tanks on dry bulk material carriers
Part #
ID OD WP Bend Radius Weight
in in psi in lbs/ft
014-0482-0150I* 3 3.58 150 10 1.89
014--642-0150I* 4 4.72 150 13 2.41
Tube: Black EPDM
Reinforcement: Multiple plies of high tensile textile with dual steel wire helix
Cover: Black EPDM
Temperature: -40°F to 400°F
Branding: EAGLE HOT AIR® BLOWER 150 PSI / 400 DEG. F. MAX
Lengths: 100 ft.
* Full Vacuum
Bulk Transfer
• Designed for pneumatic transport of abrasive materials such as cement and sand, and
other dry abrasive bulk materials
• Anti-static transfer of materials that create static buildup on the liner (anti-static compound
in hose liner protects from static electricity).
Part #
ID OD
Plies
Max WP
Tube Construction
Weight
in in psi lbs/ft
014-0642-0074I 4 4.49 2 75 1/8 1.67
014-0642-0075I 4 4.72 2 75 1/4 2.14
Tube: 1/4”abrasion resistant layer of synthetic and natural elastomer blend, smooth
1/8”inch abrasion resistant layer of synthetic and natural elastomer blend, smooth
Reinforcement: High tensile textile cord
Cover: Blend of synthetic and natural elastomers, black, smooth with cloth impression, antistatic, abrasion, weather, and
ozone resistant. Black SBR
Temperature: -30°F to 185°F
Lengths: 100 ft.
Branding: 4”EAGLE BULK® MATERIAL 75 PSI
Eagle Bulk® Material Hose
Back to the Table of Contents
21. MATERIAL
HANDLING
21Call 315-451-2770 or visit www.jgbhose.com for more information.
Eagle UREMAT Hose
Abrasive Handling Hose
• Designed for industrial vacuum cleaning and handling abrasive materials such as pellets, rocks, sands,
chips and grain transfer. Can be used as a sand shot line, bark blow line, or for lawn/mulch/straw collection.
Part #
ID OD WP Standard Length Min Bend Radius Weight
in in psi ft in lbs/ft
014-0241-0100I 1-1/2 1.85 50 100 2 0.42
014-0321-0100I 2 2.40 40 100 3 0.59
014-0401-0100I 2-1/2 3.09 40 100 3 0.82
014-0481-0100I 3 3.64 40 100 4 1.18
014-0641-0100I 4 4.76 35 100 6 1.94
014-0801-0100I 5 5.75 35 100 10 2.45
014-0961-0100I 6 6.80 30 100 12 3.50
014-1281-0100I 8 9.16 30 60 18 5.90
Tube: Highly flexible, static dissipative Black HMC PVC compound with Polyurethane lining
Cover: Black PVC convoluted cover
Temperature: -40°F to 150°F
Eagle UREMAT HD Hose
Abrasive Handling Hose
• Designed for industrial vacuum cleaning and heavy-duty handling of materials such as pellets, rocks, sands,
chips and grain transfer. Can be used as a sand shot line, bark blow line, or for lawn/mulch/straw collection.
Part #
ID OD WP Standard Length Min Bend Radius Weight
in in psi ft in lbs/ft
014-0241-0100IHD 1-1/2 1.88 50 100 3 0.46
014-0321-0100IHD 2 2.44 40 100 4 0.65
014-0401-0100IHD 2-1/2 3.12 40 100 5 0.89
014-0481-0100IHD 3 3.70 40 100 6 1.23
014-0641-0100IHD 4 4.80 35 100 10 2.02
014-0801-0100IHD 5 5.81 35 100 14 2.50
014-0961-0100IHD 6 6.87 30 100 18 3.84
014-1281-0100IHD 8 9.18 30 60 22 6.52
Tube: Highly flexible, abrasion resistant Blue HMC PVC compound with thick Polyurethane lining
NOTE: Polyurethane Tube 40% thicker than that of (Eagle Uremat)
Cover: Highly flexible, abrasion resistant Blue HMC PVC compound with thick Polyurethane lining
Temperature: -40°F to 150°F
Back to the Table of Contents
22. MATERIAL HANDLING HOSE
22 Call 315-451-2770 or visit www.jgbhose.com for more information.
BoarVac Suction Hose
Heavy-Duty Abrasive Resistant Suction Hose
• Designed as a heavy-duty abrasive resistant suction hose for vacuum
trucks or handling abrasives such as crushed rock, sand, pea gravel,
cement, dry fertilizer, iron ore, and grains.
Tube: SBR rubber blended with static carbon black, smooth bore,
corrugated O.D.
Reinforcement: Rigid PVC Helix
Temperature: -40°F to 140°F
Color: Black
Part #
ID OD WP Min Bend Radius Vacuum Weight
in in psi in in/Hg lbs/ft
014-0242-0045I 1-1/2 1.82 45.0 2.0 29.8 0.37
014-0322-0040I 2 2.35 40.0 2.5 29.8 0.50
014-0402-0035I 2-1/2 2.95 35.0 2.5 29.8 0.73
014-0480-0035I 3 3.50 35.0 3.0 29.8 1.10
014-0642-0030I 4 4.63 30.0 4.5 29.8 1.77
014-0800-0030I 5 5.76 30.0 5.0 28 2.47
014-0962-0030I 6 6.73 30.0 9.2 28 3.08
014-1282-0030I 8 9.04 30.0 15.0 27 5.65
Eagle Mine® Spray Hose
Mining
• Designed for heavy-duty service requirements of underground mine spray applications,
excellent choice for high pressure air applications in construction and quarries
Part #
ID OD Wall WP Burst Bend Radius Weight Length
in in in psi psi in lbs/ft ft
003-0123-1000I 3/4 1.04 0.14 1000 4000 6 0.35 100
003-0163-1001I 1 1.33 0.17 1000 4000 8 0.50 50
003-0163-1000I 1 1.33 0.17 1000 4000 8 0.50 100
003-0203-1000I 1-1/4 1.63 0.18 1000 4000 10 0.71 50
003-0203-1001I 1-1/4 1.63 0.18 1000 4000 10 0.71 100
003-0243-1001I 1-1/2 1.88 0.20 1000 4000 11 0.91 50
003-0243-1000I 1-1/2 1.88 0.20 1000 4000 11 0.91 100
003-0323-1000I 2 2.43 0.21 1000 4000 16 1.14 100
Tube: Blend of synthetic elastomers, smooth, oil resistant, black
Reinforcement: Single high tensile steel braid
Cover: Yellow, blend of synthetic elastomers compound, smooth with cloth impression
Temperature: Suitable range -22°F to 212°F
Branding: EAGLE MINE® SPRAY 1000 PSI MSHA
Standard Notice: MSHA approved cover
Features:
• Robust
• MSHA approved flame , oil and abrasion resistant cover
• Weather and ozone resistant
Back to the Table of Contents
23. MATERIAL
HANDLING
23Call 315-451-2770 or visit www.jgbhose.com for more information.
Eagle Gunite 150 PSI Hose
Gunite Application
Part #
ID OD WP Burst Weight Std. Length
in in psi psi lbs/ft ft
014-0242-0150 1-1/2 2.38 150 450 1.17 100
014-0328-0150 2 2.88 150 450 1.46 100
Tube: ¼”Pure Gum Rubber Tan
Cover: Non marking Pure Gum Blend
Reinforcement: Multiple plies of synthetic fabric with an imbedded
static wire
Branding: EAGLE GUNITE 150 PSI WP
Temperature: -22°F to 185°F
• Ultra wear resistant and thick tube, designed for high kink resistance and
perfect flow, suitable forair pumping dry sand or cement mixtures to the
water mixing nozzle in gunite applications.
Back to the Table of Contents
24. 24
WATER HOSE
Call 315-451-2770 or visit www.jgbhose.com for more information.
WATER HOSE
Water SD
• Designed for water suction and discharge in industrial and construction services.
Part #
ID OD WP Vacuum Rating Burst Bend Radius Weight
in in psi in/Hg psi in lbs/ft
004-0242-0150I 1-1/2 1.89 150 28 450 5 .73
004-0322-0150I 2 2.44 150 28 450 7 1.2
004-0482-0150I 3 3.50 150 28 450 12 1.9
004-0642-0150I 4 4.53 150 28 450 17 2.6
004-0962-0150I 6 6.61 150 24 450 27 4.9
004-1282-0150I 8 8.86 150 24 450 43 7.2
004-1602-0150I 10 10.98 150 24 450 59 12.2
004-1922-0150I 12 12.95 150 24 450 75 13.79
Tube: Natural and Synthetic Rubber
Reinforcement: High tensile synthetic textile and steel helix wire
Cover: Abrasion and weather resistant synthetic rubber
Temperature: -22°F to + 185°F
Branding: EAGLE PUMP® HD 150 PSI MAX
Eagle Pump® HD 150 PSI Max Hose
Eagle Water Discharge 150 PSI Hose
Water Discharge
• Designed for water discharge applications in construction, industry and agriculture.
Part #
ID OD WP Min Burst Weight Length
in in psi psi lbs/ft ft
005-0242-0150I 1.50 1.85 150 450 0.60 100
005-0322-0150I 2.00 2.36 150 450 0.80 100
005-0402-0150I 2.50 2.91 150 450 1.12 100
005-0482-0150I 3.00 3.46 150 450 1.47 100
005-0642-0150I 4.00 4.53 150 450 2.21 100
005-0962-0150I 6.00 6.50 150 450 3.07 100
005-1282-0150I 8.00 8.74 150 450 5.45 20
005-1602-0150I 10.00 10.63 150 450 7.17 20
Tube: Synthetic rubber
Reinforcement: 4 Ply, High tensile synthetic textile
Cover: Weather and ozone resistant synthetic rubber
Temperature: -13°F to 158°F
Branding: EAGLE WATER DISCHARGE 150 PSI WP
Couplings: Contact JGB for proper fitting recommendation and coupling procedure.
Back to the Table of Contents
25. WATER
25Call 315-451-2770 or visit www.jgbhose.com for more information.
Eagle Nitrile® 150 PSI Layflat Hose
Water Discharge
• Designed as a dependable durable, yet lightweight and flexible solution
for high volume, high pressure water transfer applications.
• The nitrile layflat allows for quick layout and retrieval and is typically used
in irrigation, sewage, and general pumping duties.
• Suitable for use and recommended for INDUSTRIAL and AGRICULTURE applications in:
• Dewatering operations
• Irrigation
• Sewage and general pumping applications
This hose is constructed using an“Extruded Thru the Weave”(ETW) manufacturing process.
* See Appendix A for Extruded-Through-the-Weave-Construction.
Part #
Nom. ID Thickness WP Burst End Pull Bend Radius Weight
in in psi psi lbs in lbs/ft
008-0242-1150I 1 1/2 .08 150 450 1980 2.30 0.21
008-0322-1150I 2 .08 150 450 2860 3.60 0.30
008-0402-1150I 2 1/2 .08 150 450 3080 4.25 0.42
008-0482-1150I 3 .10 150 450 3960 4.75 0.46
008-0642-1150I 4 .10 150 450 5280 5.60 0.64
008-0962-1150I 5 .12 150 450 9240 6.90 0.97
008-1282-1150I 6 .12 150 450 11000 7.40 1.11
008-1602-1150I 8 .12 150 450 14000 9.85 1.51
008-1702-1150I 10 .14 150 450 17000 10.50 2.50
008-1922-1150I 12 .20 150 450 31500 11.25 3.92
Tube: Blend of synthetic elastomers, smooth, oil resistant, black
Reinforcement: Single high tensile textile braid
Cover: Blend of synthetic elastomers compound, ribbed finish
Temperature: -4°F to 176°F
Lengths: 100 and 200 feet standard lengths (Long length available upon
request)
Colors: black, orange, or yellow
Back to the Table of Contents
26. WATER HOSE
26
WATER HOSE
Call 315-451-2770 or visit www.jgbhose.com for more information.
Eagle HD Nitrile Hose
Water Discharge
• Designed for dewatering operations, water and hydrocarbons discharge/bypass,
refineries chemical plants (resists aromatics), and any application involving water,
liquid manure, industrial sludges slurries, contaminated liquids, fertilizers, oils,
medium and heavy hydrocarbons, diesel fuels many chemicals in solution.
Tube: Polyester weave extruded internally externally with NBR-PVC
Temperature: -4°F to 176°F
Surface: Ribbed for maximum abrasion resistance
Standard Lengths: 660 ft, 330 ft, 100 ft, 50 ft
Manufacturing
Technology:
* Through-the-weave-technology
Nom D** Thickness WP
Bend Radius at
WP
Burst End Pulls*** Weight
in in psi ft psi lb lbs/ft
3/4 0,079 400 2,15 1200 1375 0,121
1 0,091 400 2,97 1200 1725 0,168
1 1/2 0,102 300 3,63 900 2750 0,303
1 3/4 0,106 300 4,22 900 3200 0,370
2 0,110 300 4,29 900 3450 0,431
3 0,126 250 4,79 750 5950 0,639
4 0,134 200 5,91 600 9850 0,875
5 0,150 200 6,23 600 11910 1,278
6 0,165 200 6,56 600 14200 1,682
8 0,165 175 8,20 440 15450 2,355
10 0,157 175 9,84 440 32200 2,523
12 0,157 175 10,83 480 38800 3,028
** Dimensional tolerance = Nominal Diameter + 0.080“ mini *** Figures represent 35% of Total Effective Tensile Strength.
Not recommended or approved for firefighting.
* See Appendix A for Extruded-Through-the-Weave-Construction.
Eagle Contractors Water Hose
Water Washdown
• Designed as a traditional rubber water hose coupled with standard MxF Garden Hose Thread (GHT) solid brass
fittings. This hose features a black PVC bend restrictor at female end to prevent kink and wear at hookup.
Part #
ID Length WP Weight
in ft psi lbs/ft
001-0102-0150I 5/8 50 200 15
001-0122-0150I 3/4 50 200 20
Tube: SBR+NR
Reinforcement: Spiral polyester yarns
Cover: EPDM
Temperature: -22°F up to 176°F
Branding: EAGLE CWH CONTRACTORS WATER HOSE 200 PSI MAX WP #Q##
Couplings: Male x female octagonal nut spun brass garden hose coupling
with brass ferrules
Lengths: 50ft/coil, (Custom lengths available)
Colors: Black
* Custom lengths available
Back to the Table of Contents
27. WATER
27Call 315-451-2770 or visit www.jgbhose.com for more information.
Eagle Orange/Clear Suction and Discharge Hose
Water SD
• Designed for use in fish suction and rental/construction pumping.
Features • Lightweight and flexible
• External helix provides for easy drag
• Rated for both suction discharge
• Clear sidewall permits visual check of material flow
Construction: Flexible PVC, rigid PVC helix, synthetic braiding, smooth bore, corrugated O.D.
Temperature: -13°F to 140°F
Part #
ID OD Weight Std. Length
Working
Pressure
Vacuum
Rating
Min Bend
Radius
in in lbs/ft ft psi in/HG in
007-0240-0100* 1-1/2 2.03 0.47 100 110 29 2.5
007-0320-0100I 2 2.60 0.69 100 100 29 4
007-0400-0100* 2-1/2 3.01 0.74 100 100 29 5
007-0480-0100I 3 3.70 1.13 100 100 28 6
007-0640-0080I 4 4.78 1.74 100 80 28 7
007-0960-0072I 6 7.17 3.88 20,60,100 70 28 10
007-1280-0060I 8 9.34 5.55 20,25 60 28 16
007-1600-0040I 10 11.63 8.90 20,25 40 28 25
015-0192-0020I 12 13.66 10.30 20 30 25 45
* Not standard -call for availablility.
Eagle Green/Clear PVC Water Suction Hose
Water SD
• Designed for: »» Agricultural liquid fertilizer
»» Air seeder lines
»» Drain lines
»» Irrigation lines
»» Mining applications (MSHA Approved)
»» Pumps, rental and construction dewatering
»» Pumps, trash
»» Rock dusting
»» Water suction – standard duty
Tube: PVC tube with rigid PVC helix
Temperature: -10°F to 140°F
Features • Smooth both inner outer surface
• Ellipse shaped helix: sustains strength without added thickness
• Lightweight, highly flexible - excellent vacuum rating
• Transparent construction allowing visual confirmation of material flow
Part #
ID OD
Min.
Bend Radius
WP
Vacuum
Rating
Burst Pressure (psi)
Weight Length
water temp
Clear Green
in in in psi in/Hg 50°F 96°F 122°F lbs ft
007-0160-0085I 007-0169-0085I 1 1.24 3 85 29 313 256 185 0.26 100
007-0200-0085I 007-0209-0085I 1-1/4 1.54 4 85 29 284 228 156 0.34 100
007-0240-0070I 007-0249-0070I 1-1/2 1.82 5 70 29 270 213 142 0.44 100
007-0320-0065I 007-0329-0065I 2 2.28 8 65 29 242 199 128 0.55 100
007-0400-0050I 007-0409-0050I 2-1/2 2.83 10 50 29 228 185 128 0.79 100
007-0480-0060I 007-0489-0060I 3 3.35 12 50 29 199 171 100 0.97 100
007-0640-0050I 007-0649-0050I 4 4.45 14 50 29 199 171 100 1.71 100
007-0960-0040I 007-0969-0040I 6 6.67 25 30 28 156 114 57 3.70 100/20
007-1200-0040I 007-1289-0040I 8 8.83 30 30 28 156 114 57 6.05 20
* MSHA Approved
Back to the Table of Contents
28. WATER HOSE
28
WATER HOSE
Call 315-451-2770 or visit www.jgbhose.com for more information.
Eagle EPDM Suction Hose
Water SD
Tube: EPDM blend rubber
Reinforcement: Plastic helix
Temperature: -40°F to 140°F
Designed for :
• Liquid waste suction, septic handling
• Cesspool cleaning, slurries/sludge handling
• Chemicals, dry material, grain transfer
• Mining and marine use
Features:
• Specially compounded rubber wall, exposed
• Excellent resistance to chemicals
• Lightweight and flexible
• Smooth bore, exposed helix - easy to drag
Part # ID OD WP
Vacuum
Rating
Min. Bend
Radius
Weight Std. Length
Green Yellow in in psi in/HG in lbs/ft ft
004-0169-0050I 004-0163-0050I 1 1.34 50 29 1.9 0.23 100
004-0209-0050I 004-0203-0050I 1-1/4 1.65 50 29 3.2 0.34 100
004-0249-0050I 004-0243-0050I 1-1/2 1.85 50 29 3.5 0.41 100
004-0329-0050I 004-0323-0050I 2 2.43 50 29 5.5 0.67 100
004-0489-0045I 004-0483-0045I 3 3.52 45 29 7.5 1.10 100
004-0649-0040I 004-0643-0040I 4 4.6 38 29 11.5 1.84 100
004-0969-0030I 004-0963-0030I 6 6.81 23 28 20 3.23 100
Eagle Drafting/Hard Suction Hose
Drafting
• Designed for suction side drafting, dry hydrant connections, trash pumps in construction
and mining, solid material transfer drafting from lakes, ponds, rivers, pools, wells, etc.
during structural firefighting operations.
Tube: Cold Weather PVC
Reinforcement: Rigid PVC Helix
Temperature: -22° F to 140°F
Couplings: NH LH Female x NH RL Male
Features »» Corrugated exterior for superior flexibility
»» Smooth bore for unrestricted flow
»» Lightweight and flexible in cold weather
»» Clear sidewall permits visual check of material flow
»» Weatherproof - highly resistant to ozone, salt water, and ultraviolet light
»» External helix provides for easy drag
Note: Over flexing or repeated flexing of hose within 18”of fitting is a common cause of hose failure.
ID OD Pitch
Min Bend
Radius (72°F)
WP (72°F)
Vacuum
Rating
Weight
Standard
Length
in in in in psi 72°F In/Hg lbs/ft ft
3 3.50 0.59 5.0 25 29.0 1.00 100
4 4.55 0.65 6.5 20 28.0 1.52 100
5 5.73 0.85 9.5 20 28.0 2.50 100
6 6.73 0.85 10.6 20 28.0 3.10 50, 100
Back to the Table of Contents
29. WATER
29Call 315-451-2770 or visit www.jgbhose.com for more information.
Eagle Composite® Hose
Water SD
• Designed for :
Assembly - loading and unloading barges,
ocean tanker bunkering services, other doc side
operations
Hose - handling suction and discharge gasoline,
diesel fuel, paraffin, kerosene, lubricating oils,
100% aromatics, black oils and heavy lubricants
and solvents
Features:
• Complete product compatibility for safe handling of all types of oil based 100% aromatics
• Tough PVC outer cover resistant to dragging, wear, abrasion, UV and ozone providing maximum durability
and safety
• Electrical continuity is achieved by the two wires bonded to the end fitting, this helps dissipate
accumulated charge and avoid static flash
Part #
ID Max WP Burst Bend Radius Weight Max Length
in psi psi in lbs/ft ft
006-0642-0010I/0020I 4 200 850 16 3.5 65
006-0462-0010I /0020I 6 200 850 23 7.7 65
006-1280-0010I /0020I 8 200 850 32 12.0 65
006-1600-0010I /0020I 10 200 850 40 16.9 40
006-1920-0010I / 0020I 12 200 850 47 19.8 40
Hose Size Hose Length Weight of Assembly Hose Length Weight of Assembly
in ft lbs ft lbs
4 10 70.55 20 99.20
6 10 160.94 20 233.69
8 10 264.56 20 381.40
10 10 363.76 20 507.06
12 10 551.25 20 760.01
Approximate weight of Fix x Floating Flange
Hose Size Hose Length Weight of Assembly Hose Length Weight of Assembly
in ft lbs ft lbs
4 10 52.91 20 85.98
6 10 136.69 20 209.44
8 10 227.08 20 343.92
10 10 319.67 20 462.97
12 10 396.43 20 696.16
Approximate weight of Vic x Vic
* EAGLE FLEX-Pump assemblies are tested at 1.5 times working pressure.
Carcass: Multiple layers of polypropylene fabric, film and polyester barrier layers
Reinforcement: High tensile strength galvanized inner and outer wire
Cover: Abrasion resistant PVC impregnated fabric
Temperature: -22°F to 176°F
Flange: Fix x floating per ANSI B 16.5 CARBON STEEL 150LBS SPECIFICATION
(*Complies with USCG 33CFR 154.500)
Vic: Standard cut groove carbon steel vic
Colors: Blue Standard, any color upon request
Branding: EAGLE COMPOSITE® OIL SERVICE SD CARGO 200PSI MAX WP #Q## USCG 33CFR 154.500
* See Appendix A for Handling Maintenance
(Approved by DNV GL / *Complies with USCG 33CFR 154.500)
Back to the Table of Contents
30. WATER HOSE
30
WATER HOSE
Call 315-451-2770 or visit www.jgbhose.com for more information.
Eagle FLO® Blue PVC Discharge Hose
Water Discharge
• Designed for light duty, general purpose agricultural, irrigation, and construction
applications.
Part #
ID Thickness WP Weight
in in psi lbs
008-0166-0070I 1 0.051 70 0.10
008-0246-0080I 1.5 0.055 80 0.17
008-0326-0080I 2 0.060 80 0.23
008-0486-0070I 3 0.063 70 0.40
008-0646-0070I 4 0.063 70 0.52
008-0966-0050I 6 0.071 50 0.85
Tube: Blue PVC
Reinforcement: Polyester Yarn
Cover: Blue PVC
Temperature: -4°F to 150°F
Branding: EAGLE FLO® WATER DISCHARGE
Lengths: Cut and coupled to length.
Couplings: Standard short shank aluminum, malleable or brass couplings
Eagle Red PVC HD Discharge Hose
Water Discharge
Part #
ID Approx Wall Thickness WP Weight
in in psi lbs/ft
008-0241-0150I 1.5 .075 150 .20
008-0321-0150I 2 .080 150 .28
008-0481-0150I 3 .095 150 .54
008-0641-0125I 4 .100 125 .67
008-0961-0115I 6 .105 115 1.25
008-1281-0070I 8 .110 70 1.48
008-1926-0040I 12 .112 40 2.43
Tube: Premium Red PVC
Reinforcement: Two spiral plies and longitudinal silk cords
Cover: Premium Red PVC
Temperature: -10°F To 150°F
Branding: EAGLE WATER DISCHARGE HD
Packaging: Cut and coupled to length
Couplings: Standard short shank aluminum, malleable or brass couplings,
Steel Bauer
• Designed for agricultural, quarry, irrigation, mining, construction and industrial
applications.
Standard Size M x F C x E
1-1/2”x50’ A008-0241-1650 A008-0241-3550
2”x50’ A008-0321-1650 A008-0321-3550
3”x50’ A008-0481-1650 A008-0481-3550
4”x50’ A008-0641-1650 A008-0641-3550
6”x50’ A008-0961-1650 A008-0961-3550
Back to the Table of Contents
31. WATER
31Call 315-451-2770 or visit www.jgbhose.com for more information.
Eagle Mill® Hose
Water Discharge
• Designed for medium to heavy-duty discharge service.
Tube: SBR
Cover: 100% Polyester
Temperature: -25°F to 185°F
Packaging: 50 ft. and 100 ft. stock lengths
Colors: white
Couplings: Stock hose assemblies with banded C/E
Stock hose assemblies with banded water shanks
Branding: EAGLE MILL® 250 SJ
EAGLE MILL® 600 DJ
Double Jacket
Part #
ID WP Test Pressure Weight
in psi psi lbs/ft
005-0165-0600I 1 250 600 0.190
005-0245-0600I 1.5 250 600 0.260
005-0325-0600I 2 250 600 0.330
005-0400-0600I 2.5 250 600 0.450
005-0485-0600I 3 250 600 0.607
005-0645-0600I 4 250 600 0.849
Single Jacket
Part #
ID WP Test Pressure Weight
in psi psi lbs/ft
005-0165-0250I 1 150 300 0.150
005-0245-0250I 1.5 150 250 0.230
005-0325-0250I 2 150 250 0.280
005-0400-0250I 2.5 150 250 0.390
005-0485-0250I 3 150 250 0.500
005-0645-0250I 4 150 250 0.660
Eagle Flo Grey Water Discharge Hose
Water Discharge
• Designed for medium-duty discharge service.
Tube: Black
Cover: Gray premium PVC
Reinforcement: 2 ply synthetic fabric
Temperature: -10 ºF to 150 ºF (-23 ºC to 66 ºC)
Part #
ID WP Wall Thickness MIQ Weight
in psi mm ft lbs/ft
008-0327-0080I 2 120 1.5 15000 0.24
008-0487-0050I 3 110 1.6 15000 0.40
008-0647-0045I 4 110 2.2 9000 0.68
Back to the Table of Contents
32. WATER HOSE
32
WATER HOSE
Call 315-451-2770 or visit www.jgbhose.com for more information.
Eagle Water Transfer PU HD Lay Flat Hose
Water Discharge
Part #
ID Nom. OD Max WP Burst Wall Thickness
Tensile
Strength
Weight
in in psi/bar psi/bar in lbs lbs/ft
008-0960-0150PU 6 6 5/16 200/13 600/39 0.15 33000 1.41
008-1280-0150PU 8 8 5/16 200/13 600/39 0.15 89000 1.94
008-1600-0150PU 10 10 3/8 200/13 600/36 0.17 100100 2.75
008-1900-0150PU 12 12 7/16 200/13 450/30 0.18 134000 3.33
16 16 7/16 100/8 300/20 0.21 66140 5.09
• Designed for construction sites, waste water industry, agriculture and
mining, transport of abrasive materials, flexible pipeline even in extreme
terrain, irrigation and sludge disposal, for heavy duty service under toughest
conditions. Perfectly prepared for hydraulic fraction in shales and oil fields.
Tube: PU
Reinforcement: Polyester-Nylon textile
Cover: PU, Ribbed cover or smooth cover
Temperature: -58°F to 176°F
Branding: EAGLE PU WATER TRANSFER
Packaging: Rolled, packed on steel reel
Couplings: On request
Colors: Black standard, blue, red, or green upon request
Standard Lengths: 100 ft (30m), 200 ft (61m), 300 ft (91.5m), 330 ft
(100m) 660 ft (200m)
Manufacturing
Technology:
* Through-the-weave-technology
* See Appendix A for Extruded-Through-the-Weave-Construction.
Eagle Water Jetting Hose
High Pressure Water Jetting
Part #
ID Wall WP Burst Weight
in mm psi psi lbs/ft
004-0480-0800I 3 11 800 2400 2.5
004-0640-0800I 4 13 800 2400 3.7
004-0960-0600I 6 14 600 1800 5.6
• Stripping layers from hard surfaces, strip mining and washdown
applications.
Tube: NBR/SBR, light oil resistant
Reinforcement: 2-1/2”- 4”: 6 ply, 6”: 8 ply High tensile textile cord
Cover: NR, Weather, Ozone, and Abrasion Resistance
Temperature: -22°F to 185°F
Branding: EAGLE WATER JETTING
Couplings: Contact JGB for proper fitting recommendation and coupling procedure.
Colors: Black standard, blue, red, or green upon request
JGB'sEagleWaterTransferPUis
coupledwithforgedfittingsversus
sandcastedfittings,makingthem
thestrongestintheindustry!
Back to the Table of Contents
33. WATER
33Call 315-451-2770 or visit www.jgbhose.com for more information.
Eagleflex II
Pressure Wash
• Designed for use on pressure washer machines with working pressures up to 6000 psi and
temperatures up to 310°F
Part # Nom. ID ID OD WP Burst Bend Radius Weight
Black Blue Grey in in in psi psi in lbs/ft
172-1006-4002I 172-1006-5801I 172-0067-5400I 3/8 0.4 0.64 6091 18,275 2.6 .255
Tube: Synthetic rubber, resistant against cold and hot water with usual cleaning agents
Reinforcement: Two braids of high tensile steel wire
Cover: Abrasion and ozone resistant synthetic rubber
Temperature: 14°F to 310°F
Branding: 3/8”EAGLEFLEX II PRESSURE WASHER HOSE 6000 PSI / 310 DEG F #Q##
Packaging: 450ft, 2 piece reels or cut-to-length coils
Couplings: Hydraulic 100R1 type, crimped to manufacturer specifications
Colors: Blue, Black, Gray
Features:
• Available in bulk, 50 ft., 100 ft., and custom lengths
• Lightweight and easy to handle
• A unique cover compound gives JGB Eagleflex II hoses the durability and flexibility to handle abrasion and
normal cleaning chemicals used in the wash industry.
Eaglewash I
Pressure Wash
• Designed for use on pressure washer machines with working pressures up to 4000 psi snd
temperatures up to 310°F.
Part # ID OD
Max
Operating Pressure
Min
Burst
Bend
Radius
Weight
Black Blue Grey in in psi psi in lbs/ft
168-6006-3001I 168-0066-4000I 168-0067-4000I 3/8 .59 4061 12,183 2.6 0.148
Tube: Synthetic rubber, resistant against cold and hot water with usual cleaning agents
Reinforcement: One braid of high tensile steel wire
Cover: Abrasion and ozone resistant synthetic rubber, wrapped or smooth.
Temperature: 14°F to 310°F
Packaging: 500ft, 2 piece reels or cut-to-length coils
Branding: 3/8”EAGLEWASH 4001 PRESSURE WASHER HOSE 4000 PSI / 310 DEG F #Q##
Couplings: Hydraulic 100R1 type, crimped to manufacturer specifications
Colors: Blue, Black, Gray
Features:
• Available in bulk, 50 ft., 100 ft., and custom lengths
• Lightweight and easy to handle
• A unique cover compound gives JGB Eaglewash I hoses the durability and flexibility to handle abrasion
and normal cleaning chemicals used in the wash industry.
Back to the Table of Contents
34. WATER HOSE
34
WATER HOSE
Call 315-451-2770 or visit www.jgbhose.com for more information.
Eaglewash Carpet Cleaning Hose
Carpet Cleaning
• Designed for use on pressure washer machines with working pressures up to 3625 psi and
temperatures up to 250°F (300°F Intermittent).
Part # ID OD
Max Oper.
Pressure
Burst
Bend
Radius
Weight
Black Blue Grey in in psi psi in lbs/ft
168-0042-3000I 168-0046-3001I 168-0047-3001I 1/4 0.519 3625 12,009 1.38 .12
Carcass: Synthetic rubber, resistant against cold and hot water with usual cleaning agents
Reinforcement: One braid of high tensile steel wire
Cover: Abrasion and ozone resistant synthetic rubber, smooth only
Temperature: -40°F to 250°F (300°F Intermittent)
Packaging: 400 ft, 2 piece reels or cut-to-length coils
Couplings: Hydraulic 100R1 type crimped to fitting manufacturer specifications.
Colors: Blue, Black, Grey
Branding: 1/4”EAGLEWASH I PRESSURE WASHER HOSE 3625 PSI MAX WP INTERMITTENT 300 DEG F #Q##
Features:
• Available in bulk, 50 ft., 100 ft., and custom lengths
• Lightweight and easy to handle
• A unique cover compound gives JGB Eaglewash Carpet Cleaning hoses the durability and flexibility to
handle abrasion and normal cleaning chemicals used in the wash industry.
THUNDERBOLT®
Pressure Wash
• Designed for use on either combination machines or pressure washer machines.
Part #
Nom ID Nom. OD Bend Radius Min. Burst Max. Oper. Pressure Weight
in in in psi psi@250°F psi@325°F lbs/ft
171-9006-3000 3/8 .690 2.5 12,000 3000 350 .21
Tube: Black, heat resistant synthetic rubber
Reinforcement: One wire braid
Cover: Black heat and oil resistant synthetic rubber RMA class B (pin pricked)
Temperature: Handles up to 325°F (163°C) steam at 350 psi with a safety factor in excess of 10 to 1.
Handles up to 250°F (121°C) water at 3000 psi with a 4 to 1 safety factor.
Branding: 3/8 THUNDERBOLT® COMBO 3000 PSI / 250°F - 350 PSI / 325°F
Couplings: Recommend testing with hydraulic 100R1 over the wire (Skive hose) fittings crimped to
the fitting manufacturer specifications. Compatibility with different over the wire fittings
should be tested prior to use.
Back to the Table of Contents
35. 35 Call 315-451-2770 or visit www.jgbhose.com for more information.
SPECIALTY HOSE
• Designed for snowmaking, featuring a high performance construction.
Part #
Nom ID Test Pressure Burst Pressure
in mm psi Mpa psi Mpa
023-0249-0802 1 1/2 38.1 800 5.52 2000 13.79
023-0329-0802 2 50.8 800 5.52 2000 13.79
023-0409-0802 2 1/2 63.5 800 5.52 1500 10.34
Tube: Black, fused thermoplastic which produces an extremely smooth
waterway, significantly reducing friction loss compared to
conventional liners.
Reinforcement: Woven filament polyester
Cover: Woven filament polyester
Temperature: As low as -55°F (Working)
Branding: AVALANCHE® 2000 II
Lengths: 50’and 100’standard lengths; (* Any Length Available Upon Request)
Couplings: Internally expanded aluminum male NPT threaded couplings or
high-performance, quick disconnect couplings.
Avalanche® 2000 II Snowmaking Hose
Snowmaking Hose
EZ Kote® Paint Spray Hose
Airless Paint Spray Hose
• Designed for conveying paints, fuels, oils, and most other solvents.
• EZ Kote® is recommended for applications where an electrostatic charge must be eliminated.
Part #
Nom ID Nom OD Bend Radius Min Burst WP Weight
in in in psi psi lbs/100 ft
016-0032-350P 3/16 .432 1.8 14,000 3500 4.8
016-0046-330P 1/4 .491 2.5 13,200 3300 5.0
016-0060-300P 3/8 .660 3.5 13,200 3300 8.7
Tube: Extruded, seamless nylon.
Reinforcement: High tensile synthetic.
Cover: Abrasion-resistant polyurethane.
Temperature: 0° to 200°F
Packaging: Cut to length and coupled.
Branding: E-Z Kote® Wireless Antistatic Hose 1/4”ID Max W.P. 3300psi 228bar
Couplings: 1/4”or 3/8”female swivels; male NPT with spring guards.
Lengths: Made to order lengths available in all sizes.
1/4”25 ft, 50 ft assemblies.
3/8”50 ft assemblies.
3/16” Whip hose in 3 ft, 5 ft, or 6 ft lengths.
Features:
• Special construction keeps hose lightweight and flexible.
• A special static drain element dissipates static charge.
• Date coding on the coupling provides traceability.
• A high pressure conductive hose
SPECIALTY
Back to the Table of Contents
36. 36 Call 315-451-2770 or visit www.jgbhose.com for more information.
SPECIALTY HOSE
Dunlop Waterblast WB10, WB15, WB20
Waterblast
• Designed for very high pressure waterblasting.
Tube: NBR (Nitrile rubber)
Reinforcement: Four Spiral Layers
Cover: NBR (Nitrile rubber)
Temperature: -40°F to 160°F
Part # Series
ID OD WP
Burst
Pressure
Tensile
Strength
Bend Radius Weight
in in psi psi lbs in lbs/ft
168-794-06 WB15 3/8 0.843 18000 45000 2189 6.00 0.57
168-794-08 WB15 1/2 1.000 16000 40000 3283 8.00 0.85
168-794-12 WB15 3/4 1.252 14500 36250 6373 11.00 1.20
PRECAUTIONS:
• Restricted to use as high pressure waterjetting hose where safety factors of 2.5:1 are the industry norm. Due to the safety
critical nature of these very high pressure hoses, it is recommended that pre-fitted and tested assemblies are sourced.
• No warranty is given for assemblies made with non-approved fittings.
• JGB recommends referencing the recommended practices for the use of manually operated high pressure waterjetting
equipment published by the Waterjet Technology Association (WJTA).
• The WB20 Series hose is designed for ultra-high pressure waterblasting.
Tube: NBR (Nitrile rubber)
Reinforcement: Six Spiral Layers
Cover: NBR (Nitrile rubber)
Temperature: -40°F to 160°F
Part # Series
ID OD WP
Burst
Pressure
Tensile
Strength
Bend Radius Weight
in in psi psi lbs in lbs/ft
168-0082-20000 WB20 1/2 1.161 20000 50000 4178 8.00 1.17
*** Disconnects and Hammer Unions also available
Part # Series
ID OD WP
Burst
Pressure
Tensile
Strength
Bend Radius Weight
in in psi psi lbs in lbs/ft
168-0082-10000D WB10 1/2 0.969 10000 25000 2976 8.00 0.61
168-0082-12 WB10 3/4 1.27 10000 25000 4452 8.25 0.98
168-794-08 WB10 1 1.528 10000 25000 11034 14.00 1.46
Back to the Table of Contents
37. 37
SPECIALTY HOSE
Call 315-451-2770 or visit www.jgbhose.com for more information.
SPECIALTY
Zinc Plated Steel
Bauer Pipe Galvanized
• Designed for temporary suction in pressure applications. Commonly used for: clean water, storm drain,
sewer by-pass, or transmission lines. Lightweight, easy install and repair.
• Galvanized Discharge pipes, Bauer type A or B.
• Sizes from 4”to 16”ID
• Available in 3’, 6’, 10’, or 20’foot lengths.
• High temp applications up to 230° F.
High Density Polyethylene
HDPE Pipe
• Designed for temporary suction in pressure applications. Commonly used for: clean water, storm drain,
sewer by-pass, or transmission lines. Lightweight, easy install and repair.
• HDPE Discharge pipes, Bauer type A or B.
• (SDR17) Durable High Density Polyethylene
• Sizes from 4”to 16”ID
• Available in 10’, or 20’foot lengths, ask about ****Poly Tails!
• Temp Rating 140° F.
Poly Tails
Poly HDPE Tails Type A Poly HDPE Tails Type B
Back to the Table of Contents
38. 38 Call 315-451-2770 or visit www.jgbhose.com for more information.
HOSE FITTINGS
Aluminum – Stainless Steel – Carbon Steel – Brass – Poly
Cam Groove
Description Aluminum Part #
Part 1” 1-1/2” 2” 3” 4” 6” 8
A 030-01016-816CI 030-01024-824CI 030-01032-832CI 030-01048-848CI 030-01064-864CI 030-01096-896CI 030-01128-828CI
B 030-02016-816CI 030-02024-824CI 030-02032-832CI 030-02048-848CI 030-02064-864CI 030-02096-896CI 030-02128-828CI
C 030-03016-816CI 030-03024-824CI 030-03032-832CI 030-03048-848CI 030-03064-864CI 030-03096-896CI 030-03128-828CI
D 030-04016-816CI 030-04024-824CI 030-04032-832CI 030-04048-848CI 030-04064-864CI 030-04096-896CI 030-04128-828CI
E 030-05016-816CI 030-05024-824CI 030-05032-832CI 030-05048-848CI 030-05064-864CI 030-05096-896CI 030-05128-828CI
F 030-06016-816CI 030-06024-824CI 030-06032-832CI 030-06048-848CI 030-06064-864CI 030-06096-896CI 030-06128-828CI
DC 030-07016-800CI 030-07024-800CI 030-07032-800CI 030-07048-800CI 030-07064-800CI 030-07096-800CI 030-07128-828CI
DP 030-08016-800CI 030-08024-800CI 030-08032-800CI 030-08048-800CI 030-08064-800CI 030-08096-800CI 030-08128-828CI
Description (SS 316) Stainless Steel Part #
Part 1” 2” 3” 4”
C 030-03016-416I 030-03032-432I 030-03048-448I 030-03064-464I
E 030-05016-416I 030-05032-432I 030-05048-448I 030-05064-464I
Description Carbon Steel Part #
Part 4”
C 030-03064-164I
E 030-05064-164I
WARNING: UNDER NO CIRCUMSTANCES should Cam and Groove couplings be used for compressed air or steam
service!
Cam Groove quick connect couplings are designed for rapid connection/disconnection of hoses.
Note: JGB couplings are designed to comply with the dimensional requirements of MIL A-A59326.
Crimp Shank Camlocks
• Die Cast SS 304 Arms, Steel safety pins,
Steel rings, NBR gasket
• Multiple serrations on hose shank for better
coupling retention
Interchangeable with all manufacturers
who are compliant to the A-A59326
specification.
Pressure ratings for all: 1” through 4” 150psi
6” 2 cam 75psi / 4 cam 150psi
8 cam 150 psi
Back to the Table of Contents
39. FITTINGS
39Call 315-451-2770 or visit www.jgbhose.com for more information.
Steel Plated
King Combination Nipples (KCNs)
Size Part #
1” 026-0161-2310I
1-1/2” 026-0241-2310I
2” 026-0321-1310I
3” 026-0481-1310I
4” 026-0641-1310I
6” 026-0961-1310I
8” 026-1281-1310I
Aluminum
Water Shanks
MALE
Size Part #
1-1/2” 026-0241-8307
2” 026-0321-8307
3” 026-0481-8307
4” 026-0641-8307
6” 026-0961-8307
FEMALE
Size Part #
1-1/2” 026-0241-8308
2” 026-0321-8308
3” 026-0481-8308
4” 026-0641-8308
6” 026-0961-8308
Back to the Table of Contents
40. 40 Call 315-451-2770 or visit www.jgbhose.com for more information.
HOSE FITTINGS
Bauer Type Couplings
Male Bauer x NPT Long Ball
Size (in) Part #
4 102-020BMT4
6 102-020BMT6
8 102-020BMT8
Female Bauer x NPT
Size (in) Part #
4 102-FCM3124
6 102-FCM3126
8 102-FCM3128
Female Bauer x Shank
Size (in) Part #
4 102-FC3104I
6 102-FC3106I
8 102-FC3108I
10 102-FC31010I
12 102-FC21212I
4” to 8” Type B
10” 12” Type A
Size (in) Part #
4 102-MC3094I
6 102-MC3096I
8 102-MC3098I
10 102-MC30910I
12 102-MC21112I
4” to 8” Type B
10” 12” Type A
Male Bauer x Shank
Bauer Couplings are fast and easy to install. They are flexible with up to 30° articulation on the coupling joint making them ideal for difficult
site conditions. Extremely durable, Eagle Bauer Couplings are produced from high-grade, high-tensile steel with abrasion resistant hot-dip
galvanization according to DIN EN ISO 1461.
• Double pin locking lever for smooth closing action
• Equipped with a safety pin to prevent accidental openings.
• Primary applications are for irrigation and suction lines.
• Not recommended for chemicals or any hazardous type materials where the possibility of leakage would
• result in health or environmental concerns.
• Factory pressure tested at 24 bar.
• Made in Italy.
Size (in) Part #
4 102-MC3094U
6 102-MC3096U
8 102-MC3098U
12 102-MC30912U
Male Bauer x Machined Shank
Size (in) Part #
4 102-FC3104U
6 102-FC3106U
8 102-FC3108U
12 102-FC31012U
Female Bauer x Machined Shank
Male Bauer x ANSI Flange
Size (in) Part #
4 102-MC3134
6 102-MC3136
8 102-MC3138
10 102-MC22210
12 026-0192-0192
4” to 8” Type B
10” 12” Type A
Female Bauer x ANSI Flange
Size (in) Part #
4 102-FC3144
6 102-FC3146
8 102-FC3148
10 102-FC31410
12 026-0191-0192
4” to 8” Type B
10” 12” Type A
Hot Dipped, Galvanized
Back to the Table of Contents
41. FITTINGS
41Call 315-451-2770 or visit www.jgbhose.com for more information.
Bauer Cap
Size (in) Part #
4 026-0640-0000
6 026-0960-0000
8 026-0128-0002
Bauer Plug
Size (in) Part #
4 026-0480-EP40
6 026-960-EP60
8 026-1280-EP80
Bauer Locking Lever
Size (in) Part #
4 102-273LR4
6 102-273LR6
8 102-273LR8
Bauer O-ring
Size (in) Part #
4 022-0640-OR40
6 022-0960-OR60
8 022-1280-OR80
12 022-1920-OR12
Bauer Increaser
Size (in) Part #
4”FX6”M 026-0960-0480
6”FX8”M 102-FMI3-1968
Bauer Reducer
Size (in) Part #
6”FX4”M 026-0961-0480
8”FX6”M 102-FRM3-1886
Male x Female Bauer 45°
Size (in) Part #
4 026-0640-0045
6 026-0960-0045
8 026-0128-2828
Male x Female Bauer 90°
Size (in) Part #
4 026-0640-0090
6 026-0960-0090
8 026-0128-0090
Type B Strainer
Size (in) Part #
4 102-0642-0640I
6 102-0962-0960I
8 102-1282-1280I
Type A Strainer
Size (in) Part #
10 102-0161-0160
12 102-1922-1920
“Y“Bauer F x F
Size (in) Part #
4 026-0641-0640
6 026-0960-0YM6
8 026-0128-2828
“T“Bauer MxMxF
Size (in) Part #
4 102-1051701
6 102-1071701
8 102-1081701
Back to the Table of Contents
42. HOSE FITTINGS
42 Call 315-451-2770 or visit www.jgbhose.com for more information.
206 Series
Size (in) Configuration NSCWP Part #
4 threaded 200 series 2000 039-HUMF206400CS
Features:
• one-piece design
• interchangeable with current fittings
• durable and safe with reliable hose retention
• no leak path as experienced with two-piece threaded systems
206 Series
Size (in) Configuration NSCWP Part #
1 threaded 206 series 2000 039-HU206100
1 1/2 threaded 206 series 2000 039-HU206150
2 threaded 206 series 2000 039-HU206200
2 1/2 threaded 206 series 2000 039-HU206250
3 threaded 206 series 2000 039-HU206300
4 threaded 206 series 2000 039-HU206400
6 threaded 206 series 2000 039-HU206600
O-ring mounted sub provides excellent sealing properties,
runs air, water, oil or gas up to 2,000 PSI NSCWP (non-shock
cold working pressure).
Forged Steel
100 Series
Size (in) Configuration NSCWP Part #
2 threaded 100 series 1000 039-HU100200
2 buttweld 100 series 1000 039-HU100200BW*
2 1/2 threaded 100 series 1000 039-HU100250
3 threaded 100 series 1000 039-HU100300
4 threaded 100 series 1000 039-HU100400
4 buttweld 100 series 1000 039-HU100400BW*
6 threaded 100 series 1000 039-HU100600
8 threaded 100 series 1000 039-HU100800
Used on low pressure manifolds and lines and in applications
running air, water, oil or gas up to 1,000 PSI NSCWP (non-shock
cold working pressure).
* buttweld ends are schedule 80
1502 Series
Size (in) Configuration NSCWP Part #
2 threaded 1502 series 15000 039-HU1502200
For use in extreme high pressure applications running air,
water, oil, gas or mud up to 15,000 PSI NSCWP (non-shock
cold working pressure)
Hammer Unions
HOSE FITTINGS
Back to the Table of Contents
43. ACCESSORIES
43 Call 315-451-2770 or visit www.jgbhose.com for more information.
HOSE ACCESSORIES
Valves
Check Valves
Size (in) Part #
4 039-0400-CXS
6 039-0600-CXS
8 039-0800-CXS
10 039-1000-CXS
12 039-1200-CXS
16 039-1600-CXS
Butterfly Valves - Wafer Style
Size (in) Part #
4 026-BFVW400
6 026-BFVW600
8 026-1280-0004
10 039-1600-0001
12 039-1925-1920
16 039-BFVW2560
Flanged Gate Valves
Size (in) Part #
2 102-274607
3 026-0483-0480
4 026-0642-0640
6 026-0960-0072
8 026-0128-0001
10 039-1602-1600
12 039-1922-1920
16 039-2561-0150
Knife Gate Valves
Size (in) Part #
4 039-0320-00KV
3 039-0480-00KV
4 039-0640-00KV
6 039-0960-00KV
8 039-1280-00KV
10 039-1600-00KV
12 039-19200-00KV
16 039-2560-00KV
24 039-3840-00KV
Butterfly Valve - Lug Style
Size (in) Part #
4 026-BFVL400
6 039-0969-0096
8 026-BFVL800
10 039-BFVL1600
12 039-BFVL1920
16 039-BFVL2560
Full Port Ball Valves
Size (in) * Part #
1 026-0101-065
1-1/4 026-0101-066
1-1/2 026-0101-067
2 026-0101-068
2-1/2 026-0101-069
3 026-0101-070
4 026-0101-111
* Additional valve sizes available. Contact JGB for information.
Back to the Table of Contents
44. Subcategory
This is the Accessory Name
HOSE ACCESSORIES
44 Call 315-451-2770 or visit www.jgbhose.com for more information.
Round Hole Strainers
Size (in) Part #
1-1/2 026-0241-2312
2 026-0321-2312
3 026-0481-2312
4 026-0641-2312
6 026-0961-2312
8 026-0128-2312
10 026-1600-2312
12 026-0192-2071
Long Thin Round Hole Strainers
Size (in) Part #
1-1/2 026-0240-0100
2 026-0321-2314
3 026-0481-2314
4 026-0641-2314
6 026-0961-2314
Square Hole Strainers
Size (in) Part #
1-1/2 026-0241-2373
2 026-0321-2313
3 026-0482-2312
4 026-0642-2312
6 026-0962-2312
Polyethylene Strainers
Size (in) Part #
1-1/2 026-0241-2353
4 026-0321-2412
6 026-0481-2012
Strainers Screens
Bottom Skimmer Round Hole Strainers
Size (in) Part #
1-1/2 026-0241-2353
2 026-0321-2412
3 026-0481-2012
Top Skimmer Round Hole Strainers
Size (in) Part #
1-1/2 026-0241-2363
2 026-0321-2383
3 026-0481-2313
Cast Iron Foot Valve Strainers
Size (in) Part #
1-1/2 039-DFVS20
2 039-DFVS25
3 039-DFVS35
4 039-DFVS40
6 039-DFVS60
Aluminum Flat Rock Screen
Size (in) Part #
1-1/2 030-SCR032-AL
2 030-SCR048-AL
3 030-SCR064-AL
Back to the Table of Contents
45. 45 Call 315-451-2770 or visit www.jgbhose.com for more information.
APPENDIX A
HANDLING MAINTENANCE
The following recommendations are the minimum to which the user must adhere.
Eagle Slings 5000lb capacity
Available 6”through 12”ID
FIG 12
FIG 9 FIG 10
FIG 11
Traction: Do not use hose in between (FIG. 1). Let it form a small curve
(FIG. 2).
Torsion: Hose is not manufactured to work in torsion (FIG. 3). During
installation it is essential to ensure that the hose is not twisted. Let it
follow an ideal lay-line (FIG. 4).
Bending Radius: Installation tighter than the minimum bending
radius reduces the life of the hose considerably. Moreover it is
necessary to avaoid bending close to the end fittings (FIG. 5 6).
Installation: The hoses must be supported to allow normal movement
when must under pressure (dimentionsl variations). Do not rest hose
on sharp edges (FIG. 7 7B). Take adequate precautions (FIG. 8
8B). Do not support hoses with ropes or chains (FIG. 9). Flexible hose
supports or polyester slings are recommended. (FIG. 10)
Storage: Hose must be stored in a relaxed condition free from tension,
compression or other deformation. Contact with objects that could
pierce or cut must be avoided. When not in use, hose should be stored
in a dark place preferably, avoiding direct sunlight and rain. It must
be protected from rodents and insects. When such a risk is probable,
appropriate precautions must be taken.
Norms and Method of Use: Prior to installation it is necessary to
check the characteristics of the hose carefully to ensure that type,
diameter and length conform to the required specification. (FIG
12) Moreover a visual check must be carried out to make sure that
there are no obstructions, cuts damaged cover or any other evident
imperfections (FIG 11). Although the hoses are manufactured to
guarantee exceptional resistance to abrasion, it is advisable to move
them with care, avoiding knocks, dragging over abrasive surfaces
or crushing. Furthermore, hoses must not be pulled violently when
twisted or knotted.
Maintenance : Even when choice, storage and installation is carried
out correctly, regular maintenance is necessary. During regular checks,
special attention must be paid to couplings and to the appearance
of irregularities which can indicate deterioration of the hose. After
use, it is advisable to empty the hoses carefully and if necessary, clean
thoroughly. We recommend in any case, that the hoses be checked
and tested under pressure once a year.
NEVER weld reduction couplings or flanges onto original hose fittings.
NEVER close or hold the coupling ferrules in a bench vice as they could
be deformed. If necessary, hold the hose itself, closing the vice onto
the outside spirals of the hose.
FIG 8b
FIG 8
FIG 6
FIG 4
FIG 2
FIG 5
FIG 3
FIG 7
FIG 7b
FIG 1
Back to the Table of Contents
46. 46 Call 315-451-2770 or visit www.jgbhose.com for more information.
APPENDIX A
HANDLING MAINTENANCE
EAGLE COMPOSITE HOSE
JGB Enterprises
Extruded-Through-the-Weave
EAGLE Extruded-Through-the-Weave Hose
Lay Flat
Water Transfer
At JGB Enterprises we pride ourselves on supplying the highest quality, and most technologically advanced hose and assemblies the market
has to offer, and our lay flat hose program is no exception. Our EAGLE “TPU” Thermoplastic polyurethane and EAGLE ”NBR” Nitrile rubber
hoses are produced using a state of the art manufacturing technique referred to as, “extruded-through-the-weave” or single extrusion.
The unique “extrusion through the weave” process eliminates the use of tubes and adhesives. The compound is fed into a heated extrusion
barrel it’s extruded through the woven reinforcement jacket as it’s drawn through the channel. This one step extrusion process results in an
extremely strong homogenous bond between cover and woven reinforcement jacket.
EAGLE TPU hose is produced with Huntsman polyurethane U.S.A: Specification IROGRAN® A 85 P 4394
This illustration Shows a cross section of an extruded-through-
the-weave hose section including, the reinforcement weave
single extruded polyurethane or nitrile wall.
This illustration Shows a cross section of an extruded-through-the-weave
hose section including, the reinforcement weave single extruded polyure-
thane or nitrile wall.
Advantages of through-the-weave construction:
1. No adhesive is used; hence, there is no potential for the hose to delaminate.
2. At working pressure, through-the-weave hose has an elongation rate of less than 1%.
3. Adhesion peel tests have shown that adherence of a through the weave hose is twice as strong as that of 3-Ply.
4. The interior of through-the-weave hose is much smoother than 3-Ply hose, thus affording a higher flow rate.
Disadvantages of the 3-Ply layered construction:
1. 3-Ply manufactures must apply pin holes to the outer cover to allow steam used in the gluing process to escape, those same pin holes could allow moisture
to reach the adhesive that binds the outer layer to the reinforcement jacket.While this should not cause the inner tube to leak per se, moisture would
reduce the adhesive bond between both the outer and the inner tubes and the reinforcement jacket. Separation from the reinforcement jacket would
mean a loss of integrity in the strength of the hose and in the worst case a rupture, the location and extent of which cannot be predicted.
2. At working pressure, 3-Ply hose can reach an elongation rate as high as 10%. Such elongation results in“snaking”which causes the hose to move in an unpredictable
manner and may lead to damage to the hose and the environment, as well as a reduced flow rate. Not to mention the time lost shutting down to relay.
3. Also less Poly/rubber may be used in the manufacture of 3-Ply hose because of an incentive inherent in the manufacturing process to keep the hose tubes as thin
as possible.This results from the necessary procedure of turning the inside tube out, which becomes very difficult if the tubes are too thick.While suppliers of
3-Ply hose will no doubt at tribute a thinner wall to a manufacturing process finely tuned to using only the amount of material necessary to provide the desired
outcome, the truth is that a thinner tube has been used to accommodate the manufacturing process.Thinner wall will puncture easier and wear faster.
APPENDIX A
Back to the Table of Contents
47. 47Call 315-451-2770 or visit www.jgbhose.com for more information.
Featuring expert assemblies for expert drillers. JGB has been a leading supplier of hoses, fittings, and hose assemblies to the
oilfield market since 1977. Our assemblies service pressure hydrofracking, flow back, tank truck, pumping services, high volume
water transfer, cementing, and acidizing.
Our exceptional customer service will keep you drilling twenty four hours a day, seven days a week.We have the largest oilfield
hose inventory so we can provide just in time solutions in an effort to reduce unnecessary down time. Our multiple locations can
provide in-filed technical support and assure timely delivery of your assemblies.
Oilfield Hoses, Fittings, Assemblies by JGB Enterprises, Inc.
JGB Enterprises, Inc. offers every style of industrial hose, fittings, and hose assemblies to the commercial sector. JGB leads the
industry in the manufacturing of custom hose assemblies, including large diameter hose (LDH).Whether your application
involves…
• Standard sewer by-pass
• Well point jobs
• De-watering services
• Emergency response irrigation
• Flood zone
...we offer complete sales and service to develop the right assemblies for your application.
Large Diameter Hose (LDH) Program by JGB Enterprises, Inc.
JGB is proud of the high quality hose, fittings, hose assemblies that we offer to the contractor “do-it-yourselfer”. For over
30 years JGB has served the farm, rental, construction municipality markets, by providing hose solutions to customers across the
nation.
JGB stocks hose from manufacturers such as Gates, Kanaflex, Alfagomma, Kuriyama,Texcel, Continental ContiTech, Pacific Echo,
Novaflex,Thermoid, and our own JGB Private Brand hose.We look forward to being your“hose and fittings connection”.
Industrial Rental Hoses, Fittings, Assemblies by JGB Enterprises, Inc.
JGB offers a variety of products for industrial cleaning solutions including hose, hose assemblies, fittings and hose accessories.
Industrial Cleaning Catalog by JGB Enterprises, Inc.
All JGB literature is available for download at www.jgbhose.com
ADDITIONAL RESOURCES
Back to the Table of Contents