Epcon has been delivering quality Finishing Systems since 1977. Epcon has supplied custom technology, components, systems and services for cleaning, coating, and curing for a broad range of products, substrates and coatings across different industries around the globe. https://epconlp.com/products/finishing-systems/

1. Epcon has been delivering quality Finishing Systems since
1977. Epcon has supplied custom technology, components,
systems and services for cleaning, coating, and curing for a
broad range of products, substrates and coatings across
different industries around the globe.
https://epconlp.com/products/finishing-systems/

2. Washlines
&
Multistage
Washers
Experienced finishing system experts
know that the Washline is one of the
most critical aspects of the overall
finishing process. A successfully
designed, fabricated and executed
washline will ensure that the chosen
chemistry for cleaning, pre-treatment
and coating can perform effectively.
With decades of experience and
hundreds of custom engineered
washline systems designed, fabricated
and commissioned around the globe,
Epcon is uniquely qualified to be your
technology provider.
https://epconlp.com/products/finishing
-systems/wash-lines-multistage-
washers/

3. Conveyorized
Material
Handling
Systems
Epcon can provide stand-alone
finishing system ovens for your
new or retrofit/refurbishment
project as well as be your one
stop shop for complete Finishing
Systems including Washlines,
Dry-off Ovens, Paint Booths,
Flash-off and Cure Ovens,
Material Handling/Conveyors as
well as integration of the
appropriate Air Pollution Control
Technology.
https://epconlp.com/products/f
inishing-systems/conveyorized-
material-handling-systems/

4. Internal Pipe Coating System
Finishing Line with Paint and
Wash Stations, and Multiple
Prime and Cure Ovens
Epcon has manufactured equipment for all the
major Oil companies, energy service companies
and oil tool manufacturers all over the world.
This specific application for the Oil & Gas
Industry, needed a new system for the
automation of an internal pipe coating system.
https://epconlp.com/case_studies/internal-
pipe-coating-system-finishing-line-with-paint-
wash-stations-multiple-prime-cure-ovens/

5. Paint &
Powder
Booths
Epcon is often called upon to
provide the Paint Booth
enclosures for Finishing Systems.
Given our deep understanding of
the coating process air handling
conditions required to achieve
the appropriate application
environment as well as
regulatory compliance, Epcon is
uniquely capable of configuring
the optimal paint booth design
for your coating process.
https://epconlp.com/products/f
inishing-systems/finishing-
system-paint-booths/

6. Paint &
Coatings
Curing
Lines
Curing applications use heat to create a
chemical reaction to cure a finish or
adhesive onto a product, or to solidify a
plastic or epoxy, that ultimately
increases the strength and durability of
the material through a chemical
reaction. catalyzing agents are
sometimes also introduced into the
curing oven to facilitate the required
reaction. The enhanced physiochemical
linkages in the cured material result in a
harder, more durable, and stable
materials or coatings that resists
temperature, humidity, and/or
corrosion.
https://epconlp.com/products/finishing
-systems/finishing-systems-ovens/

7. Multiple
Prime and
Finishing
Ovens with
Air
Handling
System for
Metal
Coating
Application
An international coating line builder,
contacted Epcon regarding a new plant
they were going to supply to their
subsidiary in Shandong, China for
coating metal strips for the architectural
and transportation industries. In addition
to traditional architectural and
automotive coatings systems, the new
line would need to process a special
rubber based high solvent coating. This
unique coating requires a relatively slow
and tightly controlled ramp rate to
ensure proper curing.
https://epconlp.com/case_studies/mult
iple-prime-finishing-ovens-with-air-
handling-system-for-metal-coating-
application/

8. Conveyorized Finishing System
with Multistage Washline and
Dry Off Oven for Aluminum
Parts Production
Epcon designed and manufactured, a 3-Stage Washline.
Constructed using Type 316 Stainless Steel, consisting of
three (3) heated chemical tanks, using natural gas
burners, as well as a conveyor to move the parts through
the parts washer. At the exit end of the Washline is a Dry
Off Oven, to dry the parts prior to painting. In addition,
Epcon supplied the Paint Spray Booth and the Paint
Curing Oven for this Facility.
https://epconlp.com/case_studies/conveyorized-
finishing-system-multistage-washline-dry-off-oven-for-
aluminum-parts-production/

9. Integrated
System with
Prime and
Finish Ovens,
Thermal
Oxidizer and
Heat
Recovery for
a Coil
Coating
Application
A viable solution we have found to this
particular problem is custom engineering Air
Pollution Control equipment to work in
conjunction with Heat Processing
equipment. For example, coupling a multi-
zone Oven with one or two Heat Exchangers
and a standalone Oxidizer to maximize
operational cost and productivity. When
engineered properly, these custom systems
have proven fuel reduction by as much as
50% while simultaneously maintaining
compliance with air emissions regulations.
https://epconlp.com/case_studies/integrat
ed-system-with-prime-and-finish-ovens-
thermal-oxidizer-heat-recovery-for-coil-
coating-application/

10. Recuperative
Thermal
Oxidizer &
Multistage
Heat
Recovery for
Aluminum
Parts
Producer
A global Tier 1 aluminum parts
producer needed the latest design
recuperative thermal oxidizer. This
system was part of an integrated
melt system being provided by a
metals-recovery systems provider.
The system is sized to support
pretreatment of 3 tons per hour of
aluminum chips through a jet-
drying system.
https://epconlp.com/case_studies
/recuperative-thermal-oxidizer-
multistage-heat-recovery-for-
aluminum-parts-producer/

11. 55 Gallon
Drum Line
Equipped with
Washlines,
Ovens,
Recuperative
Thermal
Oxidizer and
Heat Recovery
Methods
Epcon’s capacities of designing,
engineering and manufacturing of
specialty and finishing equipment is
unparalleled. Our team custom
engineered and selected the following
systems in all Stainless Steel – including
all Stainless Steel conveyors, assembly
parts components, including the vertical
pumps. All stages heated to a
temperature of 180 °F for chemical
cleaning.
https://epconlp.com/case_studies/55-
gallon-drum-line-equipped-washlines-
ovens-recuperative-thermal-oxidizer-
heat-recovery-methods/

12. Get In
Touch
• Call us anytime Monday - Friday
08:00 - 5:00 CST
• 936.273.3300
• epcon@epconlp.com
• Mailing: P.O. Box 7060,
The Woodlands TEXAS 77387 USA
• Location: 17777 I-45 S,
Conroe TEXAS 77385 USA
• https://www.instagram.com/epconlp/
• https://twitter.com/epconlp
• https://www.linkedin.com/company/
epcon-industrial-systems/
• https://www.facebook.com/EpconInd
ustrialSystems/
• https://www.youtube.com/channel/U
C0Xzloys1BPqdBzzgqLp5Mw
• https://www.pinterest.com/epconlp/_
created/