17. 光纤存储网 - 交换机初始化 Ethernet IP Address [10.77.77.77]: Enter new ethernet IP address: Ethernet Subnetmask [255.255.254.0]: Enter new ethernet subnetmask: Fibre Channel IP Address [none]: Enter new Fibre Channel IP address if desired: Fibre Channel Subnet Mask [none]: Enter new Fibre Channel subnet mask if desired: Gateway Address [none]: Enter new gateway address: Chapter 2. Implementing an IBM TotalStorage SAN Switch 35 Set IP address now? [y = set now, n = next reboot]: Enter “y” to set now: Unix tip /dev/ttyb -9600 Windows
27. 使用 FC Router 搭建远程容灾解决方案的拓普 IP WAN 本地 光纤交换机 远程 光纤交换机 本地 光纤路由器 远程 光纤路由器 本地 DS4000 系列 远程 DS4000 系列 光纤 IP 网络
Editor's Notes
A 24-bit port address consists of three parts: Domain (bits from 23 to 16) The most significant byte of the port address is the domain. This is the address of the switch itself. One byte allows up to 256 possible addresses. Because some of these are reserved (like the one for broadcast) there are only 239 addresses actually available. This means that you can have as many as 239 switches in your SAN environment. Area (bits from 15 to 08) The area field provides 256 addresses. This part of the address is used to identify the individual FL_Ports supporting loops or it can be used as the identifier for a group of F_Ports; for example, a card with more ports on it. This means that each group of ports has a different area number, even if there is only one port in the group. Port or arbitrated loop physical address - AL_PA (bits from 07 to 00) Fabric login to get address from switch