Hydrobolt specializes in manufacturing fully traceable, high integrity special fasteners and machined components. They manufacture and distribute petro-chemical grade studbolt assemblies and fasteners from their UK headquarters where they have extensive workshop facilities and stock. Hydrobolt supplies products globally to industries requiring safety critical components such as oil and gas, petrochemical, power generation, and offshore.
Our platen holsters are made from expanded polyethylene, they are used to cover the metal platens used for locking the Wall formwork's parallel to each other during concrete pouring procedures.
Established in the year 1977, we Polytec Industries are a Sole Proprietorship Firm, engaged in manufacturing a finest quality range of Hydro Seal, Rubber Sheet, Moulded Rubber Products, Oil Seal, O Rings, Rubber Gasket, Rubber Mat, etc. These products are manufactured using high grade rubber that is procured from the dependable vendors of the industry. The offered products are precisely engineered in adherence to the international quality standards by our skilled quality experts.
Our platen holsters are made from expanded polyethylene, they are used to cover the metal platens used for locking the Wall formwork's parallel to each other during concrete pouring procedures.
Established in the year 1977, we Polytec Industries are a Sole Proprietorship Firm, engaged in manufacturing a finest quality range of Hydro Seal, Rubber Sheet, Moulded Rubber Products, Oil Seal, O Rings, Rubber Gasket, Rubber Mat, etc. These products are manufactured using high grade rubber that is procured from the dependable vendors of the industry. The offered products are precisely engineered in adherence to the international quality standards by our skilled quality experts.
End splitting during long products rolling billet quality of rolling processJorge Madias
End splitting occurs because the material being rolled has not enough ductility to withstand the stress to which it is submitted. This may happens for different reasons. Coarse cracks in the billet end, like central or diagonal cracks, weakens the end, particularly when the plane where are located coincides in part with the symmetry plane between rolls. Hot ductility of steel depends on the one hand of their intrinsic features, and on the other hand, on the temperature at which they suffer the stress, and its speed.
It is important to roll the steel within the range of higher ductility at a given deformation speed. This is more critical for steels with inherent low ductility as those containing high sulfur.
The role of MnS stringers is also clear; having S controlled at the lower level of the specification is favorable. Nevertheless it is worth to mention that if caster condition is proper and excessive thermal/mechanical stresses do not arise, very high Mn/S ratio is not necessary.
Bar ends loss temperature faster. Another factor is roll cooling, it has to be correctly oriented, not excessive and keeping the position along the processing time.
In other factors experimental and modeling results are apparently controversial. There is coincidence in the fact that more friction between bar and rolls promotes splitting, but not in factors like roll diameter and reduction.
On the basis of pilot rolling results, plane, box-box, square to round and oval to round passes are favorable to avoid splitting, while oval to square promotes splitting.
There are many different ways to machine, tool and fabricate metal parts. One of the most precise and cost efficient methods is photochemical machining, also known as chemical etching. This presentation explains the key advantages chemical etching has over other means of metal fabrication.
Investment casting is also a manufacturing technique with a ceramic metal or material is coated by the wax pattern with a refractory material of ceramic. visit know more information: http://goo.gl/59JMaF
Dead space free, well suited for viscous and polymerizing fluids
For non abrasive fluids, generally for “crust-breaking” function
DN 12 to DN 200
1/2" to 8"
PN 10 to PN 100
acc. to DN
150 to 600 Lbs acc. to DN
Investment casting is one of the archaic Investment casting procedures, with lost wax procedure being one of the most oldest metal framing techniques. From 5000 years prior, when honey bees wax shaped pattern, to today's high innovation waxes, recalcitrant materials and specialist alloys, the castings guarantee brilliant segments are created with the key advantages of precision, repeat ability, flexibility and integrity.
Blending of traditional hot forging practice with the latest technologies in computational simulation,sensing and closed loop controls,to improve process efficiency.
Different types of hot forging manufacturers in IndiaUniqueforgings
We are one of the most eminent manufacturers of hot forging from India. Our every products are made from high quality raw materials, which are durable and excellent quality.
Investment Casting Manufacturers Process - Turbo CastTurbo Cast
In this presentation describe about Complete Investment Casting Manufacturers Process and how it works. In this presentation include the formation of the wax injection, pattern removal, assembly, waxing etc...
End splitting during long products rolling billet quality of rolling processJorge Madias
End splitting occurs because the material being rolled has not enough ductility to withstand the stress to which it is submitted. This may happens for different reasons. Coarse cracks in the billet end, like central or diagonal cracks, weakens the end, particularly when the plane where are located coincides in part with the symmetry plane between rolls. Hot ductility of steel depends on the one hand of their intrinsic features, and on the other hand, on the temperature at which they suffer the stress, and its speed.
It is important to roll the steel within the range of higher ductility at a given deformation speed. This is more critical for steels with inherent low ductility as those containing high sulfur.
The role of MnS stringers is also clear; having S controlled at the lower level of the specification is favorable. Nevertheless it is worth to mention that if caster condition is proper and excessive thermal/mechanical stresses do not arise, very high Mn/S ratio is not necessary.
Bar ends loss temperature faster. Another factor is roll cooling, it has to be correctly oriented, not excessive and keeping the position along the processing time.
In other factors experimental and modeling results are apparently controversial. There is coincidence in the fact that more friction between bar and rolls promotes splitting, but not in factors like roll diameter and reduction.
On the basis of pilot rolling results, plane, box-box, square to round and oval to round passes are favorable to avoid splitting, while oval to square promotes splitting.
There are many different ways to machine, tool and fabricate metal parts. One of the most precise and cost efficient methods is photochemical machining, also known as chemical etching. This presentation explains the key advantages chemical etching has over other means of metal fabrication.
Investment casting is also a manufacturing technique with a ceramic metal or material is coated by the wax pattern with a refractory material of ceramic. visit know more information: http://goo.gl/59JMaF
Dead space free, well suited for viscous and polymerizing fluids
For non abrasive fluids, generally for “crust-breaking” function
DN 12 to DN 200
1/2" to 8"
PN 10 to PN 100
acc. to DN
150 to 600 Lbs acc. to DN
Investment casting is one of the archaic Investment casting procedures, with lost wax procedure being one of the most oldest metal framing techniques. From 5000 years prior, when honey bees wax shaped pattern, to today's high innovation waxes, recalcitrant materials and specialist alloys, the castings guarantee brilliant segments are created with the key advantages of precision, repeat ability, flexibility and integrity.
Blending of traditional hot forging practice with the latest technologies in computational simulation,sensing and closed loop controls,to improve process efficiency.
Different types of hot forging manufacturers in IndiaUniqueforgings
We are one of the most eminent manufacturers of hot forging from India. Our every products are made from high quality raw materials, which are durable and excellent quality.
Investment Casting Manufacturers Process - Turbo CastTurbo Cast
In this presentation describe about Complete Investment Casting Manufacturers Process and how it works. In this presentation include the formation of the wax injection, pattern removal, assembly, waxing etc...
At Western Heat and Forge (WHF) we are all about solving Customer’s problems with innovative solutions like creating a machined components supermarket of over 200 components for a tier 1 OE supplier; creating customized supply-around and consignment inventory programs, and entering into long term supply contracts with annual cost reductions. We consistently meet and exceed customer requirements of On-time delivery and Quality.
• We are the 1st company in the world to get API 20B and 6th in the world to get API 20C certification for Open and Closed Die Forgings upto PSL 4. Material grades include all steels including duplex and super duplex stainless steels, F-22, 17-4PH, F6NM and Inconel.
• We provide Services (Forging, Heat Treatment, Machining, Coating, Cladding, Lab) and Solutions (for eg. supply hydrostatically tested machined components, welded assemblies) as required by customers.
Western Heat and Forge is an ISO 9001, ISO 14001, OHSAS 18000, ISO/TS 16949, PED certified, global supplier with 3 manufacturing plants located in Pune, India.
Norton has developed a complete range of abrasives specifically designed for the manufacture and repair of upstream, midstream and downstream components, shipbuilding, oil rigs, pipelines, and petrochemical plants.
KREA company presentation
We are Manufacturer/Exporter company.
Our core business is welding (MAG,TIG), laser cutting and sheet metal fabrication.
We are fabricating Hydraulic Oil Reservoirs, Frames, Compactor and Excavator parts, Burner casings, Feed hoppers, Welding cabins, welding robot platforms, conveyor parts.
We have lot of references in European countries.
We are ready to serve you our best labor cost, quality and short delivery time.
Please do not hesitate to contact me for your any kind of inquiry.
Norton lancerer en serie nye skæreskiver specielt til anvendelse i støberier. De nye skæreskiver er baseret på et helt nyt bindemiddelssystem, FoundryX, som har flere fordele.
JGB Enterprises complete line of Industrial Cleaning Hoses including Rubber, PVC & Plastic suction, Sewer cleaning, Vacuum, Water washdown & Discharge Hoses, has never made waste transfer so easy to meet the needs of every individual waste management customer. JGB Enterprises supplies a multitude of accessories including aluminum, polypropylene, & stainless camlock quick couplers, hose clamps & tools, strainers & sight glasses, valves, and more!
1. Special Fastener Solutions
INTERACTIVE CONTENTS:
1 Introduction
2 Materials
3 Petro-Chemical Fasteners
4 Products
5 Thread Forms and
Ancillary Processes
6 Manufacturing Quality
7 Experience Markets
8 Contact us
CLICK TO GO DIRECTLY TO THE PAGE
2. PAGE 1 I Introduction
GO TO PAGE: HOME | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8
HYDROBOLT SPECIALISES IN:
MANUFACTURING OF FULLY TRACEABLE,
HIGH INTEGRITY SPECIAL FASTENERS AND
MACHINED COMPONENTS.
MANUFACTURING, STOCKING AND DISTRIBUTION
OF PETRO-CHEMICAL GRADE STUDBOLT
ASSEMBLIES AND FASTENERS.
Hydrobolt has established
itself as a market leader,
exporting its products
worldwide. The company is
customer orientated, focusing
on what customers require in
terms of quality, deliveries,
service and competitiveness.
All product is supplied from
head quarters in the UK
where our comprehensive
workshop and extensive
stocks are situated.
Our global multi-lingual sales
force is structured such that
there is always a Hydrobolt
sales person local to you
who is able to help.
Our vast stocks of fully
certified and traceable raw
material, semi-finished and
finished goods help reduce
lead times and enable
Hydrobolt to react quickly to
customer requirements.
Key Strengths
Quality
Deliveries
Flexibility
International Experience
Vast stocksKey Strengths:
l Quality
l On-time
deliveries
l Flexibility
l International
experience
l Stock levels
l Breakdown
delivery service
5. GO TO PAGE: HOME | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8
PAGE 4 I Products
SPECIAL FASTENERS TO SUIT
CUSTOMERS’ REQUIREMENTS:
• TO DRAWINGS
• IN UNUSUAL MATERIALS
• TO CUSTOMER SPECIFICATIONS
• WITH UNUSUAL THREADS
• WITH ADDITIONAL TESTING
PETRO-CHEMICAL FASTENERS
AND STUDBOLT ASSEMBLIES
FROM STOCK.
PRODUCT TYPES
BOLTS AND SETSCREWS
SOCKET SCREWS
STUDBOLTS
NUTS
ENGINEER STUDS
WASHERS
Normal and heavy series
ANSI B18.2.1
DIN 931 933
BS 1083 1768 1769 3692
ISO 4014 4017
Socket capscrews 1936 1960 series, socket setscrews
ANSI B18.3
DIN 912 913 916 6912
BS 2470 4168
ISO 4762
ANSI B16.5
DIN 975 976
BS 4882
Normal and heavy series
ANSI B18.2.2
DIN 934
BS 1083 1768 1769 3692
ISO 4032
DIN 938 939 2510
BS 2693
Flat Tab Spring Special designs
6. GO TO PAGE: HOME | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8
PAGE 5 I Thread Forms and Ancillary Processes
THREAD FORMS
All fasteners can be supplied with the following thread forms:
Metric Course UNC BSW ACME
Metric fine UNF BSF
UN8
UNS
HEAT TREATMENT
COATINGS
Quenching and tempering Thru Hardening
Normalising Solution Annealling
Nitriding Precipitation Hardening
Case Hardening
Zinc Xylar/Xylan
Zinc Nickel Molykote
Hot Dip Galv Sherardizing
PTFE/Xylan/Teflon Cadmium
Phosphate
ANCILLARY PROCESSES
7. GO TO PAGE: HOME | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8
PAGE 6 I Manufacturing and Quality
MANUFACTURING QUALITY
QUALITY ASSURANCE
Hydrobolt is LRQA approved to BS EN ISO9001:2000.
The system ensures quality control is maintained throughout
all stages of production. Hydrobolt prides itself on quality
controls that ensure products are fully compliant to
customer requirements.
CERTIFICATION
The following levels of
certification are available:
l Certificate of conformity
l Certificates to
BS EN 10204 2.1, 2.2, 3.1
l Independent inspection to
BS EN 10204 3.2
l Inspection bodies LRQA,
ABS, DNV, BV
ADDITIONAL TESTING:
l MPI
l Dye Pen
l UT
l PMI
l Mechanical
l Impacts
l Chemical analysis
Hydrobolt has an extensive, modern in-house
manufacturing facility.
THE RANGE OF MACHINERY CONSISTS OF:
l CNC lathes
l CNC milling machines
l Hot forges
l Thread rolling
l Capstans
l Semi-automatic lathes
l Centreless grinding
l Automatic saws
l Tapping machines
l Single point screw
cutting machine
MANUFACTURING CAPACITY RANGES FROM:
M1.6 (1/16” dia) to M180 (7” dia) in any length.
8. GO TO PAGE: HOME | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8
PAGE 7 I Experience and Markets
EXPERIENCE AND MARKETS
Hydrobolt supplies products
to industries demanding
safety and quality critical
products:
l Oil Gas
l Petro-chemical
l Power generation
l Offshore
l Nuclear
l Defence
l Heavy engineering
l Automotive
Plant and equipment our
products are used
in include:
l Turbines
l Subsea equipment
l Boilers
l Valves and Actuators
l Pumps
l Wellheads
l Nuclear reactors
l Heat exchangers
l Pipework fabrications
l Offshore cranes
l Racing cars
l Bridges
l Pressure vessels
l Filters
l Mining equipment
l Diesel engines
9. GO TO PAGE: HOME | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8
HYDROBOLT LTD
Global Service Centre,
Monmore Business Park,
Wolverhampton,
WV2 2EE
United Kingdom
T: +44 (0) 1902 878 000
F: +44 (0) 1902 878 001
E: sales@hydrobolt.co.uk
HYDROBOLT CANADA
Contact: Sinead Daumas
66 Talbot Street,
Guelph,
ONTARIO,
N1G 2E9
Canada
T: +1 519 826 0383
C: +1 226 820 5484
E: sinead@hydrobolt.ca
HYDROBOLT ASIA PACIFIC
Contact: Ken Chng
Cyberhub North,
54 Serangoon North Ave 4,
#06-18 Singapore
555854
T: + 65 68765837
F: + 65 68765937
E: ken.chng@hydrobolt.com.sg
HYDROBOLT LATIN AMERICA
Contact: Bruno Da Ros
Av. Rio Branco 89 – 26th Floor,
CEP 20040-004,
Rio de Janeiro, RJ
Brazil
T: +55 (21) 2233 5214
F: +55 (21) 2516 5923
E: bruno@hydroboltgroup.com
HYDROBOLT MIDDLE EAST
Contact: Ranjith Lal Madhavan
PO BOX 30652,
Abu Dhabi,
United Arab Emirates
T: +971 2 582 4043
F: +971 2 582 4033
C: +971 502044026
E: ranjith@hydroboltgroup.com
HYDROBOLT HOUSTON
Contact: Daniel Fellows
11490 Westheimer Road,
Suite 850,
Houston,
TX 77077
USA
T: + 1 713 425 6301
F: + 1 713 783 0067
E: daniel.fellows@hydroboltgroup.com
HEAD OFFICE