1. HOW TO SET UP A P.A
SYSTEM.
STEP BY STEP GUIDE.
By Andrew
Mullarkey
2. STEP ONE
Firstly collect one extension cable to plug into the mains
electricity.
Plug the kettle leads into the extension cable and use one for
the P.A and one for each active speaker.
3. STEP TWO
Next, plug a XLR cable into each speaker.
The XLR must go form the output of the desk to in the input of
the speaker.
4. STEP THREE
Next, collect mini jack and with two on one end
Connect a quarter inch jack to each mini on one end,
Plug the quarter inch jacks into channel one and two on the
desk and plug the mini into sound source
(in this case and iPhone).
5. STEP FOUR
Finally, turn on the desk and speakers.
Place the master volume on zero and control the volume on
each channel. (press the mute/on button to hear channel).
Control the gain to avoid peak.
Control the E.Q (lows, high mids, lows mids and high).
