https://www.sas.co.uk/get-your-guide-to-reducing-the-cost-of-your-wan
If you could save money on your WAN, what would you spend it on?
This comprehensive guide will explain why you're paying too much and what to do about it.
Learn how costs can be saved:
Understanding price changes
Leveraging new networking models
Improving your commercial deal
Learn how to do it:
Step by Step guide with ten-point action plan
https://www.sas.co.uk/get-your-guide-to-reducing-the-cost-of-your-wan
Passive optical networks (PON) using fibre to the home/building (FTTH/B) are important as the primary ultrafast broadband architecture to support increasing bandwidth demands. PON networks such as FTTH/B eliminate expensive equipment in streets and provide enormous network capacity. Next generation PONs will support even higher bandwidth through wavelength division multiplexing on existing fibre infrastructure. Australia is currently behind other countries in deploying FTTH/B but opportunities exist to leapfrog older technologies and rollout modern high-speed fibre networks to meet current and future bandwidth needs.
WiMAX has the potential to replace existing telecommunications infrastructure by providing broadband internet, phone, and TV services without the need for cables. It can offer these services to both fixed locations and mobile users. WiMAX works by transmitting data between base stations and customer equipment over the air. The key components are radios at the base stations and customer locations, along with antennas to transmit and receive the wireless signals. WiMAX provides faster speeds and wider coverage than existing wireless technologies like WiFi, and allows for converged voice, data, and video services.
New Media Technology ca1 by Suzanne Roy n00082614SuzanneRoy3
The document summarizes the author's research into broadband internet service providers for a small arts management business operated from home. The author examines packages from Vodafone, UPC, Eircom, and Digiweb based on factors like speed, cost, and bundled services. After comparing options, the author chooses Eircom's Business Lite Next Generation package for its focus on small businesses, suitable speeds of 8Mb/512kbps, and competitive price of €20.65 per month.
Sample business plan to share with other entrepreneurs. Business plan from my first startup, ViewPlus, which was a video-on-demand company. ViewPlus was admitted into Garage.com's "Heaven" (investor & entrepreneur matching service), where less than 2% of companies were accepted. We raised $600,000 in angel funding and $33 million from institutional investors.
Cloud Telesol Private Limited is a company based in Navi Mumbai, India that specializes in fiber-to-the-home (FTTH) and fiber-to-the-building (FTTB) network solutions using gigabit passive optical network (GPON) technology. The company provides networking equipment, fiber optic cables, wireless access points, and turnkey installation and maintenance services. It partners with national DTH service providers and ISPs to deliver broadband internet, IPTV, and optical distribution of DTH television signals over its GPON networks. The document includes presentations on GPON technology, the benefits of FTTH networks, and commercial proposals for implementing GPON in residential and commercial buildings.
Passive optical networks (PON) using fibre to the home/building (FTTH/B) are important as the primary ultrafast broadband architecture to support increasing bandwidth demands. PON networks such as FTTH/B eliminate expensive equipment in streets and provide enormous network capacity. Next generation PONs will support even higher bandwidth through wavelength division multiplexing on existing fibre infrastructure. Australia is currently behind other countries in deploying FTTH/B but opportunities exist to leapfrog older technologies and rollout modern high-speed fibre networks to meet current and future bandwidth needs.
WiMAX has the potential to replace existing telecommunications infrastructure by providing broadband internet, phone, and TV services without the need for cables. It can offer these services to both fixed locations and mobile users. WiMAX works by transmitting data between base stations and customer equipment over the air. The key components are radios at the base stations and customer locations, along with antennas to transmit and receive the wireless signals. WiMAX provides faster speeds and wider coverage than existing wireless technologies like WiFi, and allows for converged voice, data, and video services.
New Media Technology ca1 by Suzanne Roy n00082614SuzanneRoy3
The document summarizes the author's research into broadband internet service providers for a small arts management business operated from home. The author examines packages from Vodafone, UPC, Eircom, and Digiweb based on factors like speed, cost, and bundled services. After comparing options, the author chooses Eircom's Business Lite Next Generation package for its focus on small businesses, suitable speeds of 8Mb/512kbps, and competitive price of €20.65 per month.
Sample business plan to share with other entrepreneurs. Business plan from my first startup, ViewPlus, which was a video-on-demand company. ViewPlus was admitted into Garage.com's "Heaven" (investor & entrepreneur matching service), where less than 2% of companies were accepted. We raised $600,000 in angel funding and $33 million from institutional investors.
Cloud Telesol Private Limited is a company based in Navi Mumbai, India that specializes in fiber-to-the-home (FTTH) and fiber-to-the-building (FTTB) network solutions using gigabit passive optical network (GPON) technology. The company provides networking equipment, fiber optic cables, wireless access points, and turnkey installation and maintenance services. It partners with national DTH service providers and ISPs to deliver broadband internet, IPTV, and optical distribution of DTH television signals over its GPON networks. The document includes presentations on GPON technology, the benefits of FTTH networks, and commercial proposals for implementing GPON in residential and commercial buildings.
1. The document discusses the relationship between FTTH (fiber to the home) and LTE networks for both fixed and mobile operators. It explores whether LTE can substitute for fixed networks in some cases and the factors that determine this.
2. Key considerations for operators in choosing a network investment strategy include how far to roll out fiber, whether LTE can replace copper networks in rural areas, when to transition from 3G to 4G, and how technologies like WiFi can reduce mobile network costs.
3. The economics of FTTH versus LTE deployment depend on factors like population density, spectrum availability, and the need for usage caps. LTE may be preferable to DSL in low density areas
The document discusses how Actelis Networks provides solutions to help network operators scale their networks effectively. It describes how Actelis' technologies, such as Dynamic Rate Bonding (DRB), allow operators to increase bandwidth capacity, extend their network reach to cover more customers, and reduce costs - helping operators scale their networks in multiple dimensions in a cost effective manner. Specific Actelis products like the MLU-64 card and ML230 platform are highlighted as delivering high port density and scale. Comparisons show Actelis' solutions providing significantly higher throughput and reach enhancement over competing technologies.
The document provides information about broadband internet services available in the Deansgrange area, including:
- There are 26 packages from 6 providers available in Deansgrange, compared to 43 packages from 8 providers in Tallaght.
- Key providers in Deansgrange include Digiweb, Imagine, Perlico, Eircom, Irish Broadband, and Chorus NTL.
- Packages offer different speeds and prices. The author recommends the Imagine 3Mbps package for €40 per month for small businesses operating from home.
- Broadband in the UK provides better value, with more choice, competition, and newer technology leading to lower prices than in Ireland.
Fiber to the Home: Making That Business Model WorkYankee Group
The document discusses building a generic business model for fiber to the home (FTTH) networks. It finds that for a payback period of less than 5 years, subscriber takeup must be at least 30%. Increasing takeup and reducing costs per home connected have the strongest positive impact on payback. Increasing ARPU and cash margins have a lower effect. Introducing a cost of money increases payback periods, but also increases the sensitivity to improvements. Potential solutions to enhance the business model include addressing underserved business markets, pursuing partnerships, and reconsidering premium and wholesale strategies.
Researching Broadband Internet Services available to SMEs operating in Carric...michelleiadt
The document summarizes broadband internet options for an event management company located in Carrickmines, Dublin. It identifies six provider options for the area and provides details on costs, speeds, and usage limits. An analysis compares the options and determines that UPC Fibre Power Broadband would be the best suitable option due to its fast speeds, large data allowance, technical support, and lack of need for a telephone line.
Information about the different types of broadband packages offered by different telecommunications companies and the prices they are offering the packages at.
The document analyzes broadband internet service options for small-to-medium enterprises (SMEs) in Ireland in 2011. It defines broadband and various technologies like ADSL. Key factors for SMEs in choosing a provider are discussed, like contention ratio and download/upload speeds. Companies providing broadband access in Ranelagh are listed. Six technological options for an SME are described and compared based on price, speeds, usage limits, and other details. The document concludes that the UTV Internet NGB 24MB Option 1 is the best choice for the SME as it has an uncongested contention ratio, unlimited usage, and is relatively inexpensive.
A Leased line is Ethernet fibre connection which helps connecting businesses whilst no other business or third party can share your connection. Due to its high performance this network becomes the popular solution for many organisations. They are highly secure, flexible, resilient and consist of multiple backup options. Leased lines are essential for increasing bandwidth, high speed and symmetrical speeds.
The document discusses growth projections for broadband, wireless, and fixed line subscribers globally through 2013. It finds that while the recession has slowed growth temporarily, broadband subscribers will increase by 72% and wireless by over 60% by 2013. Fixed lines will decline gradually but be offset by broadband and wireless growth. The Asia-Pacific region will have half of global subscribers but account for only 28% of market value, while North America will have 7% of subscribers but 23% of market value. Growth rates vary widely by country.
FairPoint Communications is an internet service provider that operates in 18 states. It is investing over $40 million to expand broadband infrastructure in Maine over the next 5 years. Traditional network architectures with hub and spoke or full mesh configurations have limitations. IP/MPLS networks and carrier Ethernet services provide more scalable, robust, and cost-effective connectivity for multi-site businesses. FairPoint's VantagePoint network uses a next-generation IP/MPLS architecture to deliver diverse, high-performance connectivity with quality of service and other benefits over traditional network options.
This document discusses different types of leased lines, including point-to-point connections, MPLS VPNs, and internet leased lines. It describes how point-to-point connections provide a dedicated circuit between two locations. It explains that MPLS VPNs allow an MPLS network to be formed by connecting each location to a service provider's MPLS network. It also outlines how internet leased lines offer direct connectivity to the internet through a dedicated connection.
This document discusses different types of broadband internet access. It describes digital subscriber line (DSL), cable modem, fibre optic, wireless, satellite, and broadband over powerline technologies. It provides details on connection speeds, advantages, and disadvantages of each. The document also lists broadband providers and plans available in the Cabinteely area of Ireland, and recommends UPC fibre internet and a Vodafone mobile WiFi device for a small business scenario based on speed and cost.
Broadband refers to high-speed internet access that is always on and faster than dial-up. There are several types of broadband including DSL, cable, fibre optic, wireless, satellite, and powerline. DSL uses existing phone lines to transmit data at speeds up to several Mbps depending on location. Cable uses coaxial cables to provide broadband comparable to DSL. Fibre optic transmits data at substantially faster speeds, tens or hundreds of Mbps. Wireless broadband uses radio links and can be fixed or mobile. Satellite broadband works through orbiting satellites but is the most expensive option. In Ireland, options for broadband in the Cabinteely area include DSL from Eircom or Vodafone, cable
The document provides information to help choose an internet service provider (ISP), including questions to consider regarding speed, costs, contracts, and support. It then reviews 10 available broadband providers in the area and their plans, pricing, and features. Types of broadband connections like DSL, cable, wireless, and satellite are also outlined. The document concludes by discussing fiber optic vs copper connections and references for further research.
The document discusses broadband internet options available to small and medium enterprises (SMEs) in Dun Laoghaire, Ireland. It finds that Dun Laoghaire has 30 broadband packages available from 7 providers, offering speeds from 2Mbps to 12Mbps. It examines the connection types, technologies, and packages offered by providers like Irish Broadband, Eircom, Imagine, and Chorus NTL. Based on factors like speed, cost, reliability, and customer support, the author determines that Chorus NTL's fibre broadband would best suit an SME, providing 5Mbps speeds for €22 per month.
The document discusses broadband internet options available to small and medium enterprises (SMEs) in Dun Laoghaire, Ireland. It finds that Dun Laoghaire has 30 broadband packages available from 7 providers, offering speeds from 2Mbps to 12Mbps. It examines the connection types, technologies, and packages offered by providers like Irish Broadband, Eircom, Imagine, and Chorus NTL. Based on factors like speed, cost, reliability, and customer support, the author determines that Chorus NTL's fibre broadband would best suit an SME, providing 5Mbps speeds for €22 per month.
This document discusses the business case for high capacity broadband wireless networks. It argues that high capacity wireless can compete with fiber networks by using technologies like YIG that enable wavelength division multiplexing and increasing wireless capacity. To succeed, networks need to have the lowest costs by using simple product offerings, lean organizations, flexible integrated equipment, and minimizing costs of equipment, installation, sales, back office functions. The FCC has also proposed allowing licensed spectrum holders to lease parts of their spectrum, which could help more carriers incorporate high capacity wireless.
Multapplied Networks - Bonding and Load Balancing together in Bonded Internet™Multapplied Networks
This paper examines existing technologies that help increase network performance. It finishes by explaining the advantages and features of our Bonded Internet™ service - a service that bonds disparate WAN/Internet connections to give customers fater, more reliable networks.
The Internet is a global system of interconnected computer networks that use TCP/IP protocols to link billions of devices worldwide. It consists of private, public, academic, business and government networks linked through a variety of networking technologies carrying a wide range of information and services. Research into packet switching networks in the 1960s and 1970s led to the development of early networks like ARPANET that eventually evolved into the Internet.
This presentation demonstrates the potential cost savings of convergence between 5G and FTTH/B. It illustrates the differences between various scenarios and the impact of key factors on the total cost savings of a converged network.
1. The document discusses the relationship between FTTH (fiber to the home) and LTE networks for both fixed and mobile operators. It explores whether LTE can substitute for fixed networks in some cases and the factors that determine this.
2. Key considerations for operators in choosing a network investment strategy include how far to roll out fiber, whether LTE can replace copper networks in rural areas, when to transition from 3G to 4G, and how technologies like WiFi can reduce mobile network costs.
3. The economics of FTTH versus LTE deployment depend on factors like population density, spectrum availability, and the need for usage caps. LTE may be preferable to DSL in low density areas
The document discusses how Actelis Networks provides solutions to help network operators scale their networks effectively. It describes how Actelis' technologies, such as Dynamic Rate Bonding (DRB), allow operators to increase bandwidth capacity, extend their network reach to cover more customers, and reduce costs - helping operators scale their networks in multiple dimensions in a cost effective manner. Specific Actelis products like the MLU-64 card and ML230 platform are highlighted as delivering high port density and scale. Comparisons show Actelis' solutions providing significantly higher throughput and reach enhancement over competing technologies.
The document provides information about broadband internet services available in the Deansgrange area, including:
- There are 26 packages from 6 providers available in Deansgrange, compared to 43 packages from 8 providers in Tallaght.
- Key providers in Deansgrange include Digiweb, Imagine, Perlico, Eircom, Irish Broadband, and Chorus NTL.
- Packages offer different speeds and prices. The author recommends the Imagine 3Mbps package for €40 per month for small businesses operating from home.
- Broadband in the UK provides better value, with more choice, competition, and newer technology leading to lower prices than in Ireland.
Fiber to the Home: Making That Business Model WorkYankee Group
The document discusses building a generic business model for fiber to the home (FTTH) networks. It finds that for a payback period of less than 5 years, subscriber takeup must be at least 30%. Increasing takeup and reducing costs per home connected have the strongest positive impact on payback. Increasing ARPU and cash margins have a lower effect. Introducing a cost of money increases payback periods, but also increases the sensitivity to improvements. Potential solutions to enhance the business model include addressing underserved business markets, pursuing partnerships, and reconsidering premium and wholesale strategies.
Researching Broadband Internet Services available to SMEs operating in Carric...michelleiadt
The document summarizes broadband internet options for an event management company located in Carrickmines, Dublin. It identifies six provider options for the area and provides details on costs, speeds, and usage limits. An analysis compares the options and determines that UPC Fibre Power Broadband would be the best suitable option due to its fast speeds, large data allowance, technical support, and lack of need for a telephone line.
Information about the different types of broadband packages offered by different telecommunications companies and the prices they are offering the packages at.
The document analyzes broadband internet service options for small-to-medium enterprises (SMEs) in Ireland in 2011. It defines broadband and various technologies like ADSL. Key factors for SMEs in choosing a provider are discussed, like contention ratio and download/upload speeds. Companies providing broadband access in Ranelagh are listed. Six technological options for an SME are described and compared based on price, speeds, usage limits, and other details. The document concludes that the UTV Internet NGB 24MB Option 1 is the best choice for the SME as it has an uncongested contention ratio, unlimited usage, and is relatively inexpensive.
A Leased line is Ethernet fibre connection which helps connecting businesses whilst no other business or third party can share your connection. Due to its high performance this network becomes the popular solution for many organisations. They are highly secure, flexible, resilient and consist of multiple backup options. Leased lines are essential for increasing bandwidth, high speed and symmetrical speeds.
The document discusses growth projections for broadband, wireless, and fixed line subscribers globally through 2013. It finds that while the recession has slowed growth temporarily, broadband subscribers will increase by 72% and wireless by over 60% by 2013. Fixed lines will decline gradually but be offset by broadband and wireless growth. The Asia-Pacific region will have half of global subscribers but account for only 28% of market value, while North America will have 7% of subscribers but 23% of market value. Growth rates vary widely by country.
FairPoint Communications is an internet service provider that operates in 18 states. It is investing over $40 million to expand broadband infrastructure in Maine over the next 5 years. Traditional network architectures with hub and spoke or full mesh configurations have limitations. IP/MPLS networks and carrier Ethernet services provide more scalable, robust, and cost-effective connectivity for multi-site businesses. FairPoint's VantagePoint network uses a next-generation IP/MPLS architecture to deliver diverse, high-performance connectivity with quality of service and other benefits over traditional network options.
This document discusses different types of leased lines, including point-to-point connections, MPLS VPNs, and internet leased lines. It describes how point-to-point connections provide a dedicated circuit between two locations. It explains that MPLS VPNs allow an MPLS network to be formed by connecting each location to a service provider's MPLS network. It also outlines how internet leased lines offer direct connectivity to the internet through a dedicated connection.
This document discusses different types of broadband internet access. It describes digital subscriber line (DSL), cable modem, fibre optic, wireless, satellite, and broadband over powerline technologies. It provides details on connection speeds, advantages, and disadvantages of each. The document also lists broadband providers and plans available in the Cabinteely area of Ireland, and recommends UPC fibre internet and a Vodafone mobile WiFi device for a small business scenario based on speed and cost.
Broadband refers to high-speed internet access that is always on and faster than dial-up. There are several types of broadband including DSL, cable, fibre optic, wireless, satellite, and powerline. DSL uses existing phone lines to transmit data at speeds up to several Mbps depending on location. Cable uses coaxial cables to provide broadband comparable to DSL. Fibre optic transmits data at substantially faster speeds, tens or hundreds of Mbps. Wireless broadband uses radio links and can be fixed or mobile. Satellite broadband works through orbiting satellites but is the most expensive option. In Ireland, options for broadband in the Cabinteely area include DSL from Eircom or Vodafone, cable
The document provides information to help choose an internet service provider (ISP), including questions to consider regarding speed, costs, contracts, and support. It then reviews 10 available broadband providers in the area and their plans, pricing, and features. Types of broadband connections like DSL, cable, wireless, and satellite are also outlined. The document concludes by discussing fiber optic vs copper connections and references for further research.
The document discusses broadband internet options available to small and medium enterprises (SMEs) in Dun Laoghaire, Ireland. It finds that Dun Laoghaire has 30 broadband packages available from 7 providers, offering speeds from 2Mbps to 12Mbps. It examines the connection types, technologies, and packages offered by providers like Irish Broadband, Eircom, Imagine, and Chorus NTL. Based on factors like speed, cost, reliability, and customer support, the author determines that Chorus NTL's fibre broadband would best suit an SME, providing 5Mbps speeds for €22 per month.
The document discusses broadband internet options available to small and medium enterprises (SMEs) in Dun Laoghaire, Ireland. It finds that Dun Laoghaire has 30 broadband packages available from 7 providers, offering speeds from 2Mbps to 12Mbps. It examines the connection types, technologies, and packages offered by providers like Irish Broadband, Eircom, Imagine, and Chorus NTL. Based on factors like speed, cost, reliability, and customer support, the author determines that Chorus NTL's fibre broadband would best suit an SME, providing 5Mbps speeds for €22 per month.
This document discusses the business case for high capacity broadband wireless networks. It argues that high capacity wireless can compete with fiber networks by using technologies like YIG that enable wavelength division multiplexing and increasing wireless capacity. To succeed, networks need to have the lowest costs by using simple product offerings, lean organizations, flexible integrated equipment, and minimizing costs of equipment, installation, sales, back office functions. The FCC has also proposed allowing licensed spectrum holders to lease parts of their spectrum, which could help more carriers incorporate high capacity wireless.
Multapplied Networks - Bonding and Load Balancing together in Bonded Internet™Multapplied Networks
This paper examines existing technologies that help increase network performance. It finishes by explaining the advantages and features of our Bonded Internet™ service - a service that bonds disparate WAN/Internet connections to give customers fater, more reliable networks.
The Internet is a global system of interconnected computer networks that use TCP/IP protocols to link billions of devices worldwide. It consists of private, public, academic, business and government networks linked through a variety of networking technologies carrying a wide range of information and services. Research into packet switching networks in the 1960s and 1970s led to the development of early networks like ARPANET that eventually evolved into the Internet.
This presentation demonstrates the potential cost savings of convergence between 5G and FTTH/B. It illustrates the differences between various scenarios and the impact of key factors on the total cost savings of a converged network.
The key themes from the Broadband World Forum 2012 included discussions around software defined networks (SDN) and using it to virtualize telecom networks, allowing changes to be made more quickly. Big data analytics and using customer data to improve customer relationships was also a topic. Presentations also focused on maximizing bandwidth over existing copper networks and the state of fiber deployments worldwide. The home gateway concept was criticized for being out of touch with how people actually use devices and services in their homes today.
1) The document discusses fiber optic patch cables and data center solutions provided by Connectium LTD. It focuses on pre-terminated cabling systems that simplify installation and enable superior functionality in data centers.
2) It also covers topics like Ethernet networking, IP routing, network design considerations like oversubscription rates, and the advantages of a fiber optic network over copper cabling.
3) Connectium provides structured cabling infrastructure design, installation of cabling systems, and aims to optimize networks for customers' current and future connectivity needs.
"Islands of Connectivity" are harming profitability and slowing growthMestizo Enterprises
This Solution Brief is for the Budgetary Manager who is considering an upgrade to cable and/or network switches. This paper will help you to gain an understanding of the economic reasons NOT to pay for the network overhaul and instead consider a next generation all fiber, all property multiservice network solution. You will learn how to identfy "Islands of Connectivity" and discover how to take action that eliminates these islands. You can deliver increased gains at lower costs, today.
What are the main data cable categories and what is the difference.docxGary Crilly, RCDD/OSP
What are the main data cable categories and what is the difference
Understanding Data Cable Categories
Telecommunications and data transfer are two of the most elements of modern business. Without the correct handling of these two aspects, it’s going to be a struggle to be competitive in the business landscape. Thankfully, you can minimise this struggle by working with the best cables for the job. But there are a lot of cables available on the market. How exactly do you know which one is best? And what are the differences between data cables and phone cables? Understanding the answers to these key questions is the only way to succeed.
What are the Main Data Cable Categories?
Cabling comes in a variety of specifications, lengths and even colours. Whilst the colour of your cabling is far from important, it’s crucial that you understand what the main categories are and their capabilities. The most common type of cabling used in business is data cabling, and it can be found holding IT infrastructures and IP phone networks together. The most common forms of data cabling are:
www.nmcabling.co.uk
Leased lines are point-to-point connections that transmit data between devices through dedicated circuits. They provide reliable, high-speed connections but are more expensive than alternatives like ADSL. There are different types of leased lines including point-to-point, MPLS VPNs, and internet leased lines. While leased lines guarantee bandwidth, newer carrier Ethernet services provide similar functionality at lower speeds over broadband networks.
5 maximazing networkcapacity_v4-jorge_alvaradoSSPI Brasil
This document discusses how to maximize network capacity through bandwidth optimization and data compression techniques. It provides an agenda that covers defining wireless link optimization, maximizing network capacity for internet access, VPN networks, UDP traffic, corporate applications, and cellular backhaul. Specific scenarios and case studies are presented where XipLink's optimization solutions have reduced bandwidth usage by 18-60% for various application types including internet, VPNs, VoIP, video surveillance, and file transfers. The solutions provide a typical return on investment of less than 4 months.
This document provides an overview of broadband technologies and services. It discusses how broadband is defined as internet connections faster than 256 kbps and how demand for high-bandwidth applications is driving the need for faster connections. It then describes some common broadband technologies like DSL, cable modems, and fiber optics as well as older technologies like ISDN. It also discusses how broadband enables new applications and revenue opportunities for internet service providers.
Comparing Copper and Fiber Options Data Centerrobgross144
In most data center designs there is a mixture of both copper and fiber infrastructure. This paper is not suggesting that one should replace the other, rather that each should be considered carefully with respect to the applications expected to be supported over the life of the data center. With varied capabilities of networking equipment and cabling options, a thorough analysis should be performed to plan the most cost effective data center infrastructure to maximize your return on investment.
This document defines key terms related to content delivery and networking, including backbone, bandwidth, CDN, DSL, distributed computing, hosting company, ISP, latency, NSP, peer-to-peer networking, quality of service, streaming media, and webcasting. It then provides bandwidth specifications for common connection types and a quick takeaway section highlighting 10 key points about content delivery networks and peer-to-peer streaming.
5G will enable new capabilities for both consumers and enterprises through technological advancements like massive MIMO, beamforming, and network slicing. It promises to deliver 10x greater bandwidth per connection, low latency, extremely high reliability, and expanded coverage. However, achieving these goals will require significant investment from operators to deploy more cells and backhaul. While 5G can initially provide differentiation, its full capabilities may become standardized over time, reducing opportunities for operators to differentiate based on technical features alone. This creates business challenges around justifying the high costs of 5G networks and maintaining profitable operations in a highly competitive market.
This document discusses various topics relating to branch connections in networking. It covers remote access connections such as broadband options for businesses including cable, DSL, wireless technologies, and factors to consider when selecting them. It also discusses PPPoE including how it works, configuring a router as a PPPoE client, and troubleshooting. Additionally, it introduces VPNs and their benefits for securing site-to-site and remote access connectivity. Specific protocols discussed include GRE and eBGP.
With worldwide mobile backhaul connections increasing from 5 to 10 Mbps in 2009 to 50 Mbps by 2012, mobile operators, network equipment vendors and others must implement new strategies to cope with the influx. Fiber, copper, microwave, millimeter wave—each backhaul medium has its own advantages and limitations in terms of availability, cost to deploy, operational cost, speed/distance and regulatory considerations. What is the right strategy for today’s 3G and emerging 4G ecosystem, and is there any hope of leveraging today's backhaul assets for three (let alone five) years?
In this webinar, Jennifer Pigg, Yankee Group research VP, examines the mobile backhaul solutions operators are deploying today and the emerging strategies for tomorrow.
a2b Fiber is a builder of next generation open access fibre optic networks providing dark fibre to communications service providers and private network operators in BC. a2b Fiber aims to address barriers to entry in the telecom market by building an open access fibre network and leasing dark fibre to service providers. This reduces costs for providers and increases competition compared to each provider building their own network infrastructure.
Data Cabling for Schools
As the world increasingly moves towards a digital age, the need for fast and reliable data cabling is more important than ever. From small businesses to large schools, data cabling forms the backbone of many operations. Here at NM Cabling, we understand the importance of having a high quality data cabling infrastructure in place, and we are here to help you get the most out of your system. Furthermore, data cabling for schools requires a great deal of attention to detail due to the environment. As a result, it's ideal to use a reputable company that complies with all the relevant regulations and guidelines.
Complying with the guidelines set by the Department Of Education, NM Cabling offers a comprehensive data cabling service. That covers everything from design and installation to maintenance and repairs. In addition, We only use the highest quality materials and components, so you can be sure that your data cabling will be reliable and fit for purpose.
www.nmcabling.co.uk
As the world increasingly moves towards a digital age, the need for fast and reliable data cabling is more important than ever. From small businesses to large schools, data cabling forms the backbone of many operations. Here at NM Cabling, we understand the importance of having a high quality data cabling infrastructure in place, and we are here to help you get the most out of your system. Furthermore, data cabling for schools requires a great deal of attention to detail due to the environment
CAT6A Data cabling is the advanced version of the previous Cat6 . It provides significant advantages over CAT5e and CAT6 data cabling, including higher data transfer speeds, reduced crosstalk, and improved signal integrity. CAT6A is also backward compatible with CAT5e and CAT6, making it an ideal choice for upgrading your existing network infrastructure.
Future of Broadband workshop presentation - ITU Telecom World 2013Martin Geddes
1. The document argues that pursuing ever higher broadband speeds is leading the industry into a "death spiral" as quality of experience declines faster than networks can be upgraded.
2. It advocates reframing the resource model around quality metrics like loss and delay rather than speed. Prioritizing scheduling of traffic to manage variability in loss and delay is key to improving quality of experience.
3. A multi-class service model is proposed to separate traffic by resilience requirements and allow differentiated pricing to better drive capacity planning and revenue. This fits demand to the underlying constraints of packet networks.
Similar to How to reduce the cost of your WAN (20)
Fueling AI with Great Data with Airbyte WebinarZilliz
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
GraphRAG for Life Science to increase LLM accuracyTomaz Bratanic
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Best 20 SEO Techniques To Improve Website Visibility In SERPPixlogix Infotech
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Driving Business Innovation: Latest Generative AI Advancements & Success StorySafe Software
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Letter and Document Automation for Bonterra Impact Management (fka Social Sol...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on automated letter generation for Bonterra Impact Management using Google Workspace or Microsoft 365.
Interested in deploying letter generation automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Skybuffer SAM4U tool for SAP license adoptionTatiana Kojar
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Main news related to the CCS TSI 2023 (2023/1695)Jakub Marek
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
Introduction of Cybersecurity with OSS at Code Europe 2024Hiroshi SHIBATA
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
TrustArc Webinar - 2024 Global Privacy SurveyTrustArc
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Taking AI to the Next Level in Manufacturing.pdfssuserfac0301
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
Your One-Stop Shop for Python Success: Top 10 US Python Development Providersakankshawande
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
Presentation of the OECD Artificial Intelligence Review of Germany
How to reduce the cost of your WAN
1.
2. Introduction
A business network is a significant investment, so it’s important to
ensure you’re getting value for money.
It’s common to wonder whether you’re paying more than you should
for your network, and it’s common to find that the answer is ‘yes’!
People are usually surprised by the savings they can make when they
look carefully. If you find yourself needing funds for a project, a
review of your network spend might be just what you need.
2
3. Why might you be paying
more than you should?
There are lots of
reasons, but we
can categorise
them into three
main groups:
1. Prices have fallen since you
bought your network
2. New networking models and
technologies are cheaper than
yours
3. You may be getting a poor
commercial deal
Let’s explore these in more detail.
If you fancy being a hero, we have a
step by step plan at the end that you
can employ to make some real
savings.
3
4. Contents
Like for like prices 6
Understanding price changes 5
Access costs 7
21CN cost reductions 11
Leveraging new networking models 14
New technologies 15
Networking over the internet 16
Hybrid networks 18
Wait, you’re buying circuits from just one carrier? 20
Improving your commercial deal 21
Vested interest 22
Discounts 23
Overbilling 24
More bandwidth than you need 25
The non-competitive tender 28
Ragged ended contracts 29
Renewal clauses 30
Unexpected costs 32
Step by Step guide to reducing the cost of your WAN 34
4
6. Understanding price changes
Like for like prices are falling
Like for like price reductions have been
an annual feature for years. Competition
has been a major driver; as new entrants
have introduced cheaper alternatives to
established carriers.
Market growth activity has certainly
played a part, as established players have
offered big discounts to encourage
customers to higher bandwidths.
Regulation has also played a significant
part.
For example, carriers often connect
customer sites to their networks using
BT’s Openreach fibre Ethernet circuits.
Ofcom’s Business Connectivity Market
Reviews imposed charge controls on BT
to make significant year on year price
reductions to those circuits.
What do these price reductions
mean in practice?
If you bought a network more than a
couple of years ago, it’s likely you’re
paying more than market price.
If you bought 5 years ago, then you’re
probably paying considerably more.
If you re-signed your network with a
fairly typical combination of a 10%
reduction and a few bandwidth increases
on your major circuits, then there is
probably more discount available to you.
6
7. Access costs are falling
When we connect a business site to a
modern network, we use an Access
Circuit. Several types are available to suit
the differing requirements for price,
performance and reliability across a
typical network. Common examples are:
• DSL (which uses broadband
technology connected direct to the
network)
• Superfast (fibre broadband technology)
• EFM (Ethernet in the First Mile, which
uses multiple bonded copper pairs for
uncontended, symmetric speed
connections)
• Fibre Ethernet (such as Openreach’s
EAD circuits, for the highest speed
connections)
Importantly, the availability and pricing of
Access Circuit types have changed over
time. For any given site, the type of
circuit you would choose to buy today
may not have been available when you
bought your network, or it may have cost
considerably more when you bought
it. Therefore, you may be paying over
the odds!
Let’s explore this a bit further
New types of Access Circuit were
launched and upgraded by carriers at
different times, and their availability
across the country was usually rolled out
slowly, over a long period of time
(months or years).
New circuit types launched in the last
several years include:
• Higher speed DSL
• Superfast DSL
• GEA (think: Superfast for Ethernet
networks)
• EFM
• Higher bearer speeds for fibre
Ethernet EAD circuits (think: 1Gbps
and 10Gbps)
There are three key insights to be aware
of …
7
8. Top Tip
If your network is more than a few years old, a number of your circuits might now be replaceable with cheaper access types.
New access types brought higher speed
and reliability on lower cost circuits
If you bought your network before one of these circuit types
was introduced, you might now be able to use one of them
instead of the more expensive circuit type that you bought.
For example, you may have bought a fibre Ethernet circuit for
a site that could now be served by a considerably cheaper EFM
or Superfast circuit.
8
9. Top Tip
If you’ve had your network for more than a couple of years, you may now have sites for which a cheaper access type is now in range.
Just because a new access technology had been launched when
you bought your network, it doesn’t follow that it was available at
any or all of your sites
Your circuits connect into your Carrier’s network at a number
of physical Points of Presence (POPs) around the country.
When new circuit types were first launched, they were usually
made available at a limited number of POPs, and then rolled
out to more POPs over a considerable period of time.
Circuits have a limited range from the POP (a few kilometres
for usable EFM, and originally 25km for EAD circuits).
This combination of limited POPs and limited range from the
POP, meant that availability was usually extremely patchy for
the first year or so. It’s important to check each site to see
whether a cheaper option has become available there since
you bought your network.
9
10. Top Tip
EAD Local Access could save you a considerable sum if you have sites that could now use it.
There might now be a POP that’s closer to one of your fibre
Ethernet sites than the POP you’re connected to
If one of your fibre Ethernet sites went live and then a closer
POP was subsequently launched, you might save money by
switching POP, and thus reducing the distance-related
charging for the circuit.
If that closer POP is connected directly to a BT exchange, your
site could use an even cheaper version of BT’s Openreach EAD
circuit, known as EAD Local Access.
10
11. 21cn migration cost reductions may not have been fully passed on
to you
Several years ago, BT decided to invest
heavily in a new data network on which
to run the majority of its data services.
They called this their 21st century
network (21CN). Other carriers called it
Next Generation Network (NGN). The
21CN network gave rise to a number of
modern services that are now available
from BT, such as
Their BT Wholesale Ethernet network
The EAD fibre Ethernet circuits that are
used to connect into almost all BT
services, including BT IP Connect and BT
Ethernet Connect.
A significant implication was the
retirement of legacy parts of BT’s
network. In practice, this meant the
retirement of older circuit types used to
connect to the network.
A few years ago, BT began a programme
to migrate customer circuits from the
legacy platform to new 21CN circuits, so
that it could close the legacy platform
and realise the savings from only running
the 21CN network. Since most UK
carriers buy networks from BT Wholesale
and BT Openreach, the same cost savings
apply to them too.
A key point here is that 21CN network
circuits generally cost less than the
circuits they were replacing, but the
pricing of the replacement circuits did
not always fully reflect this.
We calculated at the time that 21CN
circuits were on average 48% cheaper
than their 20CN counterparts, with the
major savings generally on the higher
bandwidth circuits. These circuits were
in use across multiple products. Here
are some examples for BT’s IP Connect
MPLS service:
11
12. Service Type Original and Replacement Service Annual Rental Saving
DSL
20CN: ADSL Plus
(2 Mbps)
21CN: ADSL Connect Plus
(Rate adaptive up to 24 Mbps)
£1,238
£650
47%
Leased Line
20CN: Leased Line
(2 Mbps)
21CN: EFM
(Multiple pair, uncontended symmetric, often 2-10
Mbps)
£12,000
£3,500 71%
Fibre Ethernet
20CN: 10 Mbps port speed
(100 Mbps bearer fibre Ethernet)
21CN: 10 Mbps port speed
(100 Mbps bearer fibre Ethernet)
£38,500
£7,000
82%
12
13. If you have a network more than five years
old, from BT or a carrier that uses their
circuits, then you probably had some 20CN
circuits.
When these were migrated, you may not have received a price
reduction that fully reflected the reduced circuit cost. Your
price might have stayed the same, with the change being
labelled ‘Planned Engineering Works’ to upgrade the circuit.
Alternatively, you might have been offered increased
bandwidth, but not a fully reduced cost. In either of these
scenarios, you’ll now be paying too much!
13
15. New networking technologies have
generally been cheaper than those that
went before them
Many years ago, people connected
their sites using Private Circuits –
digital ones if they were lucky. You
may recall names such as Kilostream
and Megastream. These were
simple, point to point circuits whose
simple topology gave them extremely
good reliability and latency. But they
were expensive, and you needed a lot
of them for any-to-any connectivity
because you had to build a mesh of
connections from every site to every
other.
Private circuits eventually gave way
to switched networks. These required
each site to have a single connection
into the provider’s cloud (which was
far cheaper ), but still allowed every
site to connect to every site.
A classic example is the IP VPN
(often referred to as an MPLS
network), such as BT’s IP Connect.
Later still, Ethernet networks
emerged, again requiring just one
connection per site. First there were
E-LINE services, where you
constructed virtual point to point
connections across the provider’s
Ethernet VPN. Then came E-LAN
services (aka VPLS), which enabled
any to any connectivity. With a few
caveats, VPLS networks could often
shave 25% off the price of an
equivalent MPLS network.
The point here is that the older your
network technology, the more likely
it is that you could save money by
upgrading.
15
16. Some people could save money by networking over the internet
Moving to the internet is counter-
intuitive, with good reason. However, for
some businesses it is sufficient, and
cheap! Let’s take a closer look…
The principle reason for having a network
is to allow people to use applications.
Perhaps the primary measure of network
performance is whether applications run
well across it. Historically, businesses
hosted their applications on-premise. As
they started to run more business-critical
(especially time-critical) applications over
their networks, they needed to use
private networks and bandwidth
optimisation technologies (such as Cisco
WAS, Ipanema, Riverbed and Silverpeak),
to ensure the applications worked well.
Here’s a classic example. A business
would use an MPLS IPVPN such as BT’s
IP Connect, and a technique called class
of service (COS) to prioritise critical
traffic. Of course, such a network isn’t
cheap, which begs the question:
“Couldn’t we use the internet?”
Perceived wisdom was that networking
over the internet was inappropriate
because the internet is a best endeavours
network whose performance can’t be
guaranteed, and over which you cannot
implement class of service.
As the speed and reliability of internet
access has improved – and more on-
premise applications have moved to
cloud-based services such as Office 365;
Hosted UC; Microsoft Azure and Amazon
Web Services - it has become simpler,
and more reasonable, to use the internet
as the primary network link.
Importantly, if you use a provider like BT
for all your connections (e.g. BTNet or BT
business broadband circuits), your inter-
site traffic stays on-net and you still get
great latency. If you’re using a private
network but the internet would be
sufficient for you, then you’re probably
paying too much for your network.
16
17. A surprising, but
little known fact
Perhaps the primary measure of a
network’s performance is its latency
– the time it takes to get a packet of
data across the network and back.
The SLA for latency on BT’s MPLS
service (IP Connect) is 20
milliseconds. That’s for the best
case, when using the highest priority
Class of Service.
The SLA for BT’s leased line internet
service, BTnet, is also 20
milliseconds.
17
18. Key Point
A Hybrid Network doesn’t just mean adding internet to your existing network. It means the ability to blend multiple network
technologies together. This gives the ultimate blend of performance where you need it, lowest cost where you need it, and ultra-rapid
circuit deployment using 4G Cellular connections.
A Hybrid Network is nearly always
cheaper and always more flexible
More recently, the concept of a Hybrid Network has emerged.
With a Hybrid Network, a business aims to get the best of both
worlds by connecting different network types together to suit
the varying price/performance requirements at each site. This
can save money while delivering performance (and can
alleviate problems with long delivery times for new circuits).
A great example is to move some of your WAN traffic to the
internet. Another might be to mix VPLS, MPLS and internet.
Hybrid Networks have become a popular aspiration with the
advent of Software Defined Networking (SDN, SD-WAN).
This is because one of SDN’s aims is to reduce costs, and one
of its claims is to do that by helping to move traffic to the
internet. If you visit an Enterprise Networking exhibition, it’s
hard to avoid talk of SDN and SD-WAN, or the principle use-
case of moving some of your less time-critical traffic to the
internet to save money.
18
19. So, if you’re paying for a private network but a Hybrid Network could meet your
needs, then you’re likely to be paying more than you need.
In many cases, customers keep private MPLS or VPLS
networks for their important sites and data centres, but
start using Internet connections for less critical sites. For
example:
Site type Primary network connection Secondary network connection
Data Centre Diversely routed MPLS, VPLS or low latency Ethernet circuits Dual carrier Internet circuits
Major Site MPLS or VPLS circuit Internet circuit using Ethernet or EFM
Medium site Internet circuit using EFM or DSL Internet circuit using 4G Cellular
Minor site Internet circuit using DSL Internet circuit using 4G Cellular
Temporary, urgent or mobile site Internet or WAN circuit using 4G Cellular
19
20. Wait, you’re buying circuits from just one
carrier?
If you’re only buying from one carrier,
then you’ll almost certainly be paying
too much.
You’ll always be paying that carrier’s
price for each site, so you will over-
pay wherever the carrier’s limited
portfolio or geographic coverage is
bettered by a competitor.
Using multiple carriers allows you to
have the right circuit in the right
place at the right price.
This is one of the unseen benefits of
hybrid WAN. People often assume
it’s about putting some of your traffic
onto the internet, when in actual fact,
it’s the ability to connect using any
technology and any carrier.
When we design a Hybrid Network
for a customer, we very rarely end
up with a single carrier solution.
If you’re only buying from one
carrier then you’ll almost certainly be
paying too much.
20
22. Carriers have a vested interest in keeping network costs high
When you buy a network, there are
actually several things that you’re buying.
First, there’s what you might call ‘the
wires’. In the old days, this might have
been a Point to Point circuit. These days,
it’s likely to be the core network and the
access circuits that connect you to it.
Then there is the hardware – typically
WAN routers but perhaps LAN switches
and WiFi Access Points, too.
Finally, there is the management service
which covers anything from design
through delivery, installation,
configuration, monitoring, change
control, troubleshooting etc.
Commonly, the wires make up the lion’s
share of the cost and of your price.
Often, the wires might be the only
element that a carrier is selling you. This
means that the carrier has a vested
interest in maximising the value that they
get from selling you the wires.
Managed Service Companies, Systems
Integrators and VARs, are not usually
making a profit from the wires.
Consequently, they don’t have the same
vested interest. So, if you bought through
a carrier, you may have paid too much.
22
23. You may not be getting
discounts applied consistently
One of the key challenges in cost control is understanding
the discounts being applied to your circuits. These
discounts are applied in different ways for different types
of circuits. So a DSL discount operates differently to an
EFM or Ethernet discount scheme.
As an example : for an Ethernet circuit, the cost is made up
from two components - a bearer cost (aka access cost) and
a port cost.
The access cost is for the physical circuit from the POP to
your office premises (usually these are 100Mb, 1Gb or
10Gb circuits for an Ethernet service).
The port cost is the bandwidth enabled over that circuit (E.g. a
40Mb port speed).
So, for a 40/1000Mb circuit there is a Separate discount on
both the port and the access element of that circuit that needs
to be understood and applied. This discount needs to be
applied to all of the Ethernet circuits.
Top Tip
One trick of the trade that carriers play is to apply this discount only to certain circuits, and leave the others
undiscounted.
23
24. Some clients pay their network bills by direct debit,
leading to inconsistencies in the carrier’s favour which
compound every month or quarter.
Conversely, there are instances where a carrier will
come back after 18 months, having forgotten to bill
some of the services and demand payment.
It is important to get a billing benchmark set and
monitored.
Watch outYou may be being overbilled for
what you’re getting
Networks are complicated things. IT and WAN Managers
often make them more complex by making multiple changes
to them over the life of the contract. This might involve
changing the bandwidth or changing the class of service
configuration.
All this can make billing a complicated affair and something
that some carriers can find difficult to cope with.
It isn’t uncommon for billing to get out of step with the
network that’s being supplied, as this blog post illustrates.
For example, a circuit that has been cancelled might
continue to be billed; or a new circuit might be billed before
it has been installed; or price reductions may not have been
correctly applied.
24
25. Poor insight into problems leads to costly
bandwidth you may not need
One of the most common issues with
a WAN is poor application
performance. This is usually blamed
on the WAN, but could actually have
been caused by issues anywhere
across the network, the infrastructure
or the application itself.
Clearly, if you are to fix a
performance issue and return to the
performance you want, it’s important
to have insight into the precise cause
of the problem. When we analyse
our customers’ performance issues,
we generally find that only 30% are
actually caused by the network.
It can be tempting to increase
bandwidth to counter poor
application response times, but just
as an example, appropriately
prioritising traffic might give a better
result at a lower cost. Account
managers are always happy to
upgrade a circuit, but will they have
done the due diligence to see if
bandwidth shortage is the root
cause?
25
26. Up to 70% of performance issues derive
from the application or infrastructure,
not the WAN
Recognising when this is the case could help you avoid paying for more bandwidth without gaining any
improvement in performance.
26
27. Keep in mind
If your management service cannot distinguish between application, infrastructure and network issues, then you may well pay too
much to achieve the application performance - and therefore user experience, that you need.
Decisions such as these should be made on fact rather than
opinion.
So, the next time your carrier suggests increasing bandwidth
without proving that this is the problem, demand that they will
regrade the circuit back to your previous bandwidth without
charge if it doesn’t fix the problem.
27
28. Keep in mind
Unless there is a competitive process in WAN renewal, you will not achieve the best price. Sometimes a competitive process will
deliver a price reduction that will also offset the cost of installing a new network.
If your supplier was not competing for your business, then you
may have paid too much
A carrier never offers their best price from the outset and
generally will not do so until the threat of a customer leaving is
real.
Carriers almost always have sufficient margin in the network to
be able to reduce their prices, but they have little incentive to
do this unless they need to win your business.
If your supplier wasn’t aware of competing proposals, or wasn’t
asked to reduce its price, then you could have paid too much.
28
29. Ragged End contracts are
expensive and hard to get out of
Many carriers engineer their contracts so that they are
ragged ended and hard to get out of.
Ragged End is where each new purchase (sometimes also
upgrades to circuits) starts a brand new term for that circuit.
If you frequently need to order new circuits or change
them, you could end up with a very ragged end to your
contract. This could mean many circuits incurring early
termination charges well past the original end date of your
contract.
With early termination costs often being 20% of the
outstanding term, this can make it very hard, financially, to get
out of a contract.
Early Termination Charges (ETCs) are often calculated
incorrectly in the provider’s favour. Surprisingly, the carrier
may not have the data to calculate it correctly. Or it might be
using an inflated figure to discourage early termination and
mitigate revenue loss.
If you wish to establish your early termination charges (ETCs),
do your own calculations so you can check your carrier’s
figures.
Top Tip
If you have a coterminous contract (where there is a single end date for the network and all its circuits), then also check
when that multi-year contract starts. In many cases the contract period will only start from the live service date of the
last circuit to be installed. In effect, this could mean that a three-year contract could extend to three and a half, perhaps
four years.
29
30. Renewal clauses can lock you into an extended contract or
prevent you negotiating better prices to renew
It’s a curious fact that carriers tend not to check proactively
whether cheaper access circuits are available for your sites.
Remember, account managers are focused on revenue
retention and not providing the most cost effective
solution.
Top Tip
One trick of the trade is to get clients to renew their contract on the historic pricing schedule and not the latest and
cheaper pricing schedule.
30
31. 65% of clients have an annual price review clause,
but only 35% actually use it.
Some carriers include a renewal clause, requiring you to submit notice of termination well in advance of
the end of the contract. If you fail to do so, your contract auto-renews with no opportunity to renegotiate
the price.
Take care: the notice period could be as much as three to six months.
31
32. Some carriers carry a sales target for ECCs because it
goes towards their revenue targets.
Therefore, all ECCs should be challenged, and planning
information reviewed in detail before authorising them.
In some cases, a small amount of lateral thinking can
result in ECCs being negated.
Keep in mind
Unexpected costs
Sometimes you can find yourself hit with costs that you
didn’t expect and would not have agreed to if you had
anticipated them. For example:
Excess Construction Charges (ECCs) may be too
high
When you buy a new circuit to connect into your network,
there is some allowance made by the carrier for the
installation cost of that circuit.
Often there will be additional work required, such as the
digging of a new duct to house the cable en route to your
premises. The cost of this work is chargeable, is known as an
Excess Construction Charge, and is passed on to the
customer when above a certain threshold.
Sometimes, this is too high, but it can be reduced if
effectively challenged.
32
33. Loss of discount on future orders
Discounts agreed in the initial contract for circuits,
installation and hardware might not flow down to
subsequent orders.
Charging for soft moves
You’re possibly being charged for every ‘move’ on your
network – even the ‘soft’ moves that are done on-screen
and without an engineer visit.
You should ask that these are only charged when they’re
significant (for example, we use a threshold of greater than
30 minutes’ work, done as an emergency before we charge).
Charging for Site moves
When moving a site, you might be held to term on the old
site, and then have to commit to new full term on the new
site, This further exacerbates the ragged end of your
contract.
You need to ensure on the order form that any change of a
circuit in-life does not extend the contract period.
Paying for things you’re not
getting
Sometimes, you can find yourself paying for things that you are
no longer getting. Here are some examples:
SLAs reduced, same price
Some contracts allow for the service to be changed without
your agreement. An example could be an international service.
It had a 24x7x7 SLA when you signed, but the carrier later
changed its agreement with the in-country provider of that
circuit to an 8x5x5 support service and you still pay the same
price for a reduced service.
Fewer EFM pairs, same price
An example here is an EFM circuit where a carrier can reduce
the number of phone line ‘pairs’ delivering that service without
notifying you – have a look at this blog.
Charging you for broken or absent backup circuits
You may have back-up circuits, but have they been tested? In
some cases, the automated failover doesn’t work or has not
been configured. In a few cases, some have never even been
delivered.
33
34. We have a step by step
10 point action plan for
reducing the cost
of your WAN in the full
document which you
can download from
our website
Please download the full guide including the 10 steps
by visiting this link >>
https://www.sas.co.uk/get-your-guide-to-reducing-
the-cost-of-your-wan
35. If you’d like advice or help,
ask for a free WAN
Cost-Reduction
Assessment
Please request a WAN cost-reduction assessment. We have years of experience
in helping customers to reduce their costs, and we’d be delighted to help you do
the same!
35
36. Or find out more by
attending a free webinar
Please register for an upcoming webinar
or subscribe to hear when we run more.
36
37. SAS Overview
A proven track record
SAS Global Communications consults, designs, deploys and supports
the networks, infrastructure and applications on which mid-market
customers run their businesses around the world.
We make customers more successful through world class service
and a competitive edge, with ultra-fast network deployment in days
and maximum application performance through monitoring the
entire application path. We achieve this by building innovative
technologies onto an integrated platform, with robust processes,
motivated staff, and quality partnerships.
We monitor 18,000 devices across 65 countries, underpin £130m of
contracts and power managed services for some of the UK’s major
ICT brands. We strive to delight customers and are proud of
multiple awards and 100% advocacy.
Founded in 1989, SAS is headquartered in Horsham, UK.
www.sas.co.uk info@sas.co.uk +44 (0) 8456 431 431
Head Office
SAS Global Communications Ltd
SAS House, Blackhouse Road
Colgate, Horsham, West Sussex
RH13 6HS
Cheltenham Office
Kingshold Buildings
3 & 4 Malmesbury Road
Cheltenham, Gloucestershire
GL51 9PL
SAS Data Centre
C/O Digital Realty
Unit 3, Foxboro Business Park
St Anne’s Boulevard, Redhill
RH1 1AX
37