How complex molds are demolded dynamic pictures

www.moldclamps.net info@moldclamps.net 0086-17322110281
DGMF Mold Clamps Co., Ltd
mingfeng425@gmail.com
Please browse our website or contact us for more articles, thank you.
How Complex Molds Are Demolded Dynamic Pictures
Written by Jasmine HL of DGMF
Today we will share with you a wave of dynamic pictures of how complex molds are demolded,
including rotary core pulling, complex slider mechanisms, complex inclined top mechanisms, and
so on. These dynamic pictures can be said to be the essence of a set of molds. We recommend
everyone to collect them. They can really help everyone to increase their knowledge.
1. Rotary core-pulling mechanism for die elbow
The dynamic pictures relate to a rotary core-pulling mechanism for a die elbow. The rotary
core-pulling mechanism comprises a slide block, a slide block seat, an elbow, a mold core, a fixed
block, a pull bar, a guide block, an oil cylinder, a stop block, a rotating shaft, a reset spring, and a
connection mold insert, wherein the pull bar is connected with the oil cylinder through a
connecting rod and connected with the slide block through a retaining member, and the elbow
mold core is connected with a rotary block through a retaining member and connected with the
slide block seat through the rotating shaft. During die core pulling, automatic rotation, and
demoulding of the elbow mold core are realized through complex cooperation of mechanical
structures, automatic production of complex products is realized, and production efficiency is
improved.
Please see below six dynamic pictures of the rotary core-pulling mechanism for die elbow.

2. Multiple complex core-pulling mechanisms
The multiple complex core-pulling mechanisms comprise a front mold slide block (a big slide
block), a neck-in slide block, a wedge block, and a neck-in mold insert slide block (a small slide
block), wherein the neck-in slide block horizontally penetrates the front mold slide block; one
end of the neck-in slide block is connected with the vertical wedge block, and the other end is
connected with the neck-in mold insert slide block; the wedge block drives the neck-in mold
insert slide block to realize core-pulling in advance in the vertical direction through the neck-in
slide block; then the front mold slide block and the neck-in mold insert slide block act
horizontally to complete complex core-pulling. Through repeated core-pulling direction changes
and the function of a mold opening controller, the small slide block can achieve core-pulling in
advance in the limited space of the big slide block.

3. Inclined-top pushing-out mechanism of complex mold
What is Side Core Pulling Mechanism?

When there are inner and outer holes or undercuts on the plastic part that is different from the
mold opening direction. Plastic parts cannot be an ejection. The molded side hole or the
undercut part must be made into a movable core. And the movable core is taken out before the
plastic part is pushed out. Then take out the plastic parts. The mechanism for accomplishing
these actions is called a side core pulling mechanism.

Please browse our website http://www.moldclamps.net/ to know more, thank you.

How complex molds are demolded dynamic pictures

Recommended

Recommended

More Related Content

Similar to How complex molds are demolded dynamic pictures

Similar to How complex molds are demolded dynamic pictures (9)

More from JasmineHL

More from JasmineHL (20)

Recently uploaded

Recently uploaded (20)

How complex molds are demolded dynamic pictures