Hooter flameproof
•
0 likes•19 views
This document provides specifications for a flameproof hooter. The hooter is made of cast aluminium alloy LM-6 with a flameproof enclosure suitable for hazardous locations zones 1 and 2. It has a 2way to multiway entry, can operate from 24v dc to 230v dc, and is rated for voltages up to 230v and 440v. The hooter has an epoxy powder coating finish and is certified by CIMFR Dhanbad to be used in gas group IIA, IIB hazardous areas for zones 1 and 2. Dimensions of the hooter are also provided.
Report
Share
Report
Share
Download to read offline
Recommended
Fcg flameproof middle east-nandita
Flame/ Ex-proof Junction Boxes, Distribution Boards, Light Fittings, Saftey Torches, Emergency Light, Telephone, Hooter, Electric Bell, Emergency Alarm , Increased Safety Weatherproof Enclosures
Rotronic HygroFlex5-EX Series
This document describes the HygroFlex5-EX series of intrinsically safe humidity and temperature transmitters. The transmitters measure relative humidity and temperature in hazardous areas and can output additional calculated parameters. They have a robust aluminum housing, interchangeable stainless steel probes, and do not require an intrinsically safe power supply. The transmitters and probes are certified for use in explosive atmospheres.
Post Weld Heat Treatment Equipment & Accessories
Post Weld Heat Treatment (PWHT) Equipment & Accessories includes temperature recorder, programmer, transformer, thermocouple attachment unit, ceramic heating pad, triple cable set, thermocouple wire & splitter cable
Thermon BSX Self-Regulating Heating Cable
This document provides specifications for BSX self-regulating heating cables, including their construction, accessories, applications, ratings, certifications, power output curves, and circuit breaker sizing information. The cables are designed to provide freeze protection or temperature maintenance for pipes, tanks, and equipment. They self-regulate their heat output in response to surrounding conditions along their entire length.
Areas clasificadas iec_nec
The document provides information on hazardous area classification standards and compares the International Electrotechnical Commission (IEC) Zone system to the National Electric Code (NEC) Class/Division system. It defines IEC Zones 0, 1, and 2 and examples of how different areas would be classified. Protection techniques like flameproof, increased safety, and intrinsic safety used in both systems are also discussed. Charts are included that compare gas groups, temperature classifications, equipment standards, and protection methods between the IEC and NEC/Canadian Electric Code systems.
Patol Analogue Linear Heat Detection Cable
The Patol analogue linear heat detection cable (LHDC) is designed to detect fires and overheating in areas that cannot support other detection methods. It can detect hot spots along its entire length and trigger alarms. The cable functions by monitoring the resistance of its dielectric insulation, which has a negative temperature coefficient, between the central conductor and outer braid layer. It is used with monitoring devices and can be installed in hazardous areas with intrinsically safe barriers. The cable comes in various outer sheath options for mechanical, chemical, or combined protection, and is suitable for a wide range of applications such as tunnels, conveyors, and industrial facilities.
Hazloc overview
Hazardous Area Location Presentation
• What is a Hazardous Location?
• What causes an explosion?
• Potential ignition sources
• Protection concepts 101
• Classification Schemes (ATEX/IEC vs. NEC)
• Designing/Certification for HazLoc
Ex D, Ex E, Ex DE, Ex ED, Ex np, Ex I
1-PETRONAS CARIGALI IRAQ HOLDING B.V2016.PDF
This certificate certifies that Thaaer Kadum Mawat, a QC Electrical Engineer with ID number 114494, successfully completed the procurement, construction, and fabrication works of the fire water network at the GIFT Fire Training Ground in Garraf Contract Area. The certificate was issued on October 2nd, 2016 by Sharul Nizam Senin, a PCIHBV Structural Engineer (FE) at Petronas.
Recommended
Fcg flameproof middle east-nandita
Flame/ Ex-proof Junction Boxes, Distribution Boards, Light Fittings, Saftey Torches, Emergency Light, Telephone, Hooter, Electric Bell, Emergency Alarm , Increased Safety Weatherproof Enclosures
Rotronic HygroFlex5-EX Series
This document describes the HygroFlex5-EX series of intrinsically safe humidity and temperature transmitters. The transmitters measure relative humidity and temperature in hazardous areas and can output additional calculated parameters. They have a robust aluminum housing, interchangeable stainless steel probes, and do not require an intrinsically safe power supply. The transmitters and probes are certified for use in explosive atmospheres.
Post Weld Heat Treatment Equipment & Accessories
Post Weld Heat Treatment (PWHT) Equipment & Accessories includes temperature recorder, programmer, transformer, thermocouple attachment unit, ceramic heating pad, triple cable set, thermocouple wire & splitter cable
Thermon BSX Self-Regulating Heating Cable
This document provides specifications for BSX self-regulating heating cables, including their construction, accessories, applications, ratings, certifications, power output curves, and circuit breaker sizing information. The cables are designed to provide freeze protection or temperature maintenance for pipes, tanks, and equipment. They self-regulate their heat output in response to surrounding conditions along their entire length.
Areas clasificadas iec_nec
The document provides information on hazardous area classification standards and compares the International Electrotechnical Commission (IEC) Zone system to the National Electric Code (NEC) Class/Division system. It defines IEC Zones 0, 1, and 2 and examples of how different areas would be classified. Protection techniques like flameproof, increased safety, and intrinsic safety used in both systems are also discussed. Charts are included that compare gas groups, temperature classifications, equipment standards, and protection methods between the IEC and NEC/Canadian Electric Code systems.
Patol Analogue Linear Heat Detection Cable
The Patol analogue linear heat detection cable (LHDC) is designed to detect fires and overheating in areas that cannot support other detection methods. It can detect hot spots along its entire length and trigger alarms. The cable functions by monitoring the resistance of its dielectric insulation, which has a negative temperature coefficient, between the central conductor and outer braid layer. It is used with monitoring devices and can be installed in hazardous areas with intrinsically safe barriers. The cable comes in various outer sheath options for mechanical, chemical, or combined protection, and is suitable for a wide range of applications such as tunnels, conveyors, and industrial facilities.
Hazloc overview
Hazardous Area Location Presentation
• What is a Hazardous Location?
• What causes an explosion?
• Potential ignition sources
• Protection concepts 101
• Classification Schemes (ATEX/IEC vs. NEC)
• Designing/Certification for HazLoc
Ex D, Ex E, Ex DE, Ex ED, Ex np, Ex I
1-PETRONAS CARIGALI IRAQ HOLDING B.V2016.PDF
This certificate certifies that Thaaer Kadum Mawat, a QC Electrical Engineer with ID number 114494, successfully completed the procurement, construction, and fabrication works of the fire water network at the GIFT Fire Training Ground in Garraf Contract Area. The certificate was issued on October 2nd, 2016 by Sharul Nizam Senin, a PCIHBV Structural Engineer (FE) at Petronas.
Push button station
This document provides specifications for a push button station including:
- The material is cast aluminium alloy LM-6.
- The enclosure is flameproof explosion proof for hazardous locations zones 1 and 2.
- The rating is suitable for up to 230V and 440V.
- It is certified for gas group IIA, IIB and meets Indian and international standards.
Push button station
This document provides specifications for a push button station including:
- The material is cast aluminium alloy LM-6.
- The enclosure is flameproof explosion proof for hazardous locations zones 1 and 2.
- The rating is suitable for up to 230V and 440V.
- It is certified for gas group IIA, IIB and meets Indian and international standards.
FEAM Enclosures - Hazardous Area & Explosion Proof Enclosures (ATEX, IECEx, I...
FEAM Enclosures - Hazardous Area & Explosion Proof Enclosures (ATEX, IECEx, I...Thorne & Derrick International
FEAM enclosures are suitable for Hazardous Area Enclosures Zone 1 & Zone 2. T&D are distributors for the FEAM range of Hazardous Area Enclosures for installation in potentially explosive atmospheres - FEAM enclosures are specified for hazardous areas Zone 1 and Zone 2 (Gases) with international certifications according to ATEX, Inmetro, GOST-R, GOST-K, IECEx and CE.
ATEX, IECEx, Inmetro, GOST-R, GOST-K, NEC505 Certified Enclosures.
Hazardous Area Enclosures : Zone 1 & Zone 2 (Gases) - Zone 21 & Zone 22 (Dusts).
Hazardous Area Classification
Group: II Category: 2G - 2D
Fcg Flameproof Middle East Nandita
FCG Middle East FZC manufactures flameproof electrical equipment for use in hazardous locations where explosive gases may be present. The company produces junction boxes, control panels, light fittings, cable glands, and other products rated for Zone 1, Zone 2, and Zone 0 hazardous areas. All products are tested and approved according to international standards to ensure they do not ignite explosive atmospheres.
06 pinze di-terra-eng
The document provides information on explosion proof electrical equipment from Feam including earthing clamps, electronic grounding systems, and acoustic signallers.
The earthing clamps (IT25 series) are used to connect tankers to ground during loading and unloading operations. The electronic grounding systems (SM2021 series) are used to verify grounding connections and allow loading/unloading when resistance is less than 20 ohms. The acoustic signallers (ETH2 and S2 series) provide audible alarms in hazardous areas.
AMS - Arctic Pad - Technical Information
1. The Arctic Pad is a heated rubber mat system developed for arctic and harsh environments to improve on current anti-icing and de-icing methods while providing a durable non-slip surface.
2. It contains self-regulating heat trace embedded in the core that automatically adjusts heating based on temperature without controls.
3. The mat provides advantages over traditional heat tracing like easier installation, improved heat distribution, traction, durability, and lower costs.
Rene_Hilario_Welder_2016
Renato Hilario has over 22 years of experience as a certified welder, fabricator, and NDT technician. He has worked on various industrial maintenance and construction projects, including offshore oil and gas facilities, shipbuilding, refineries, power plants, and more. His skills include welding, pipefitting, NDT inspections, and he has experience with materials like carbon steel, stainless steel, aluminum, and inconel. He holds certifications in welding, NDT testing, and specialized training in gas turbine and industrial turbine components.
AHMED SAAD ABDULLAH CV 10-15
This document contains Ahmed Saad's personal and professional details. It lists his name, contact information, education qualifications from Suez Canal University in metallurgy and materials engineering, languages spoken and computer skills. It then details his 8 years of experience in quality control, welding and non-destructive testing roles for various construction projects in Egypt, Algeria and power plants. His responsibilities included inspection, testing, documentation and ensuring welding and installation met code requirements.
3-Jeremias CE Mark 1856-1_2 guide.pdf
Short guide to explain the CE Marked Chimney systems under the EN-1856-1 and 2
important information to be able to look into the performance of a system chimney
53 k1d7 c07n1-lv_3.0
This technical data sheet provides specifications for the Rosenberger 53K1D7-C07N1 N 50 Ω straight jack connector. It lists electrical and mechanical characteristics such as an impedance of 50 ohms, a frequency range up to 11 GHz, return loss and insertion loss values, mating cycles over 500, and environmental specifications including operating temperature range, corrosion resistance, and IP68 moisture protection. Materials used include brass, bronze, TPX dielectric, and silicone gaskets.
Switchgears mining
This document lists approvals for various electrical apparatus and cables for use in hazardous areas of oil mines. It provides details of 14 equipment approved by Flexpro Electricals Pvt Ltd such as hand lamp fittings, well glass fittings, control gear boxes, junction boxes, switches, and portable transformers. The approvals specify the equipment type number, construction material, electrical ratings, and expiry dates of the approval, which is valid for use in Zone 1 and Zone 2 hazardous areas of oil mines.
6G.Coded.Welder.CV
Miklos Ferentzi is a skilled welder with experience welding a variety of materials including stainless steel, duplex, carbon steel, titanium, inconel, and aluminum using techniques such as TIG, MIG, FCAW, and MMA. He has 6 years of work experience welding for companies in the UK, Australia, and Hungary. His most recent role is as a TIG and flux-core welder in Poole, UK where he welds heat exchangers, pipes, flanges, and pressure vessels for oil industries.
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Design and optimization of ion propulsion drone
Electric propulsion technology is widely used in many kinds of vehicles in recent years, and aircrafts are no exception. Technically, UAVs are electrically propelled but tend to produce a significant amount of noise and vibrations. Ion propulsion technology for drones is a potential solution to this problem. Ion propulsion technology is proven to be feasible in the earth’s atmosphere. The study presented in this article shows the design of EHD thrusters and power supply for ion propulsion drones along with performance optimization of high-voltage power supply for endurance in earth’s atmosphere.
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Rainfall intensity duration frequency curve statistical analysis and modeling...
Using data from 41 years in Patna’ India’ the study’s goal is to analyze the trends of how often it rains on a weekly, seasonal, and annual basis (1981−2020). First, utilizing the intensity-duration-frequency (IDF) curve and the relationship by statistically analyzing rainfall’ the historical rainfall data set for Patna’ India’ during a 41 year period (1981−2020), was evaluated for its quality. Changes in the hydrologic cycle as a result of increased greenhouse gas emissions are expected to induce variations in the intensity, length, and frequency of precipitation events. One strategy to lessen vulnerability is to quantify probable changes and adapt to them. Techniques such as log-normal, normal, and Gumbel are used (EV-I). Distributions were created with durations of 1, 2, 3, 6, and 24 h and return times of 2, 5, 10, 25, and 100 years. There were also mathematical correlations discovered between rainfall and recurrence interval.
Findings: Based on findings, the Gumbel approach produced the highest intensity values, whereas the other approaches produced values that were close to each other. The data indicates that 461.9 mm of rain fell during the monsoon season’s 301st week. However, it was found that the 29th week had the greatest average rainfall, 92.6 mm. With 952.6 mm on average, the monsoon season saw the highest rainfall. Calculations revealed that the yearly rainfall averaged 1171.1 mm. Using Weibull’s method, the study was subsequently expanded to examine rainfall distribution at different recurrence intervals of 2, 5, 10, and 25 years. Rainfall and recurrence interval mathematical correlations were also developed. Further regression analysis revealed that short wave irrigation, wind direction, wind speed, pressure, relative humidity, and temperature all had a substantial influence on rainfall.
Originality and value: The results of the rainfall IDF curves can provide useful information to policymakers in making appropriate decisions in managing and minimizing floods in the study area.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
More Related Content
Similar to Hooter flameproof
Push button station
This document provides specifications for a push button station including:
- The material is cast aluminium alloy LM-6.
- The enclosure is flameproof explosion proof for hazardous locations zones 1 and 2.
- The rating is suitable for up to 230V and 440V.
- It is certified for gas group IIA, IIB and meets Indian and international standards.
Push button station
This document provides specifications for a push button station including:
- The material is cast aluminium alloy LM-6.
- The enclosure is flameproof explosion proof for hazardous locations zones 1 and 2.
- The rating is suitable for up to 230V and 440V.
- It is certified for gas group IIA, IIB and meets Indian and international standards.
FEAM Enclosures - Hazardous Area & Explosion Proof Enclosures (ATEX, IECEx, I...
FEAM Enclosures - Hazardous Area & Explosion Proof Enclosures (ATEX, IECEx, I...Thorne & Derrick International
FEAM enclosures are suitable for Hazardous Area Enclosures Zone 1 & Zone 2. T&D are distributors for the FEAM range of Hazardous Area Enclosures for installation in potentially explosive atmospheres - FEAM enclosures are specified for hazardous areas Zone 1 and Zone 2 (Gases) with international certifications according to ATEX, Inmetro, GOST-R, GOST-K, IECEx and CE.
ATEX, IECEx, Inmetro, GOST-R, GOST-K, NEC505 Certified Enclosures.
Hazardous Area Enclosures : Zone 1 & Zone 2 (Gases) - Zone 21 & Zone 22 (Dusts).
Hazardous Area Classification
Group: II Category: 2G - 2D
Fcg Flameproof Middle East Nandita
FCG Middle East FZC manufactures flameproof electrical equipment for use in hazardous locations where explosive gases may be present. The company produces junction boxes, control panels, light fittings, cable glands, and other products rated for Zone 1, Zone 2, and Zone 0 hazardous areas. All products are tested and approved according to international standards to ensure they do not ignite explosive atmospheres.
06 pinze di-terra-eng
The document provides information on explosion proof electrical equipment from Feam including earthing clamps, electronic grounding systems, and acoustic signallers.
The earthing clamps (IT25 series) are used to connect tankers to ground during loading and unloading operations. The electronic grounding systems (SM2021 series) are used to verify grounding connections and allow loading/unloading when resistance is less than 20 ohms. The acoustic signallers (ETH2 and S2 series) provide audible alarms in hazardous areas.
AMS - Arctic Pad - Technical Information
1. The Arctic Pad is a heated rubber mat system developed for arctic and harsh environments to improve on current anti-icing and de-icing methods while providing a durable non-slip surface.
2. It contains self-regulating heat trace embedded in the core that automatically adjusts heating based on temperature without controls.
3. The mat provides advantages over traditional heat tracing like easier installation, improved heat distribution, traction, durability, and lower costs.
Rene_Hilario_Welder_2016
Renato Hilario has over 22 years of experience as a certified welder, fabricator, and NDT technician. He has worked on various industrial maintenance and construction projects, including offshore oil and gas facilities, shipbuilding, refineries, power plants, and more. His skills include welding, pipefitting, NDT inspections, and he has experience with materials like carbon steel, stainless steel, aluminum, and inconel. He holds certifications in welding, NDT testing, and specialized training in gas turbine and industrial turbine components.
AHMED SAAD ABDULLAH CV 10-15
This document contains Ahmed Saad's personal and professional details. It lists his name, contact information, education qualifications from Suez Canal University in metallurgy and materials engineering, languages spoken and computer skills. It then details his 8 years of experience in quality control, welding and non-destructive testing roles for various construction projects in Egypt, Algeria and power plants. His responsibilities included inspection, testing, documentation and ensuring welding and installation met code requirements.
3-Jeremias CE Mark 1856-1_2 guide.pdf
Short guide to explain the CE Marked Chimney systems under the EN-1856-1 and 2
important information to be able to look into the performance of a system chimney
53 k1d7 c07n1-lv_3.0
This technical data sheet provides specifications for the Rosenberger 53K1D7-C07N1 N 50 Ω straight jack connector. It lists electrical and mechanical characteristics such as an impedance of 50 ohms, a frequency range up to 11 GHz, return loss and insertion loss values, mating cycles over 500, and environmental specifications including operating temperature range, corrosion resistance, and IP68 moisture protection. Materials used include brass, bronze, TPX dielectric, and silicone gaskets.
Switchgears mining
This document lists approvals for various electrical apparatus and cables for use in hazardous areas of oil mines. It provides details of 14 equipment approved by Flexpro Electricals Pvt Ltd such as hand lamp fittings, well glass fittings, control gear boxes, junction boxes, switches, and portable transformers. The approvals specify the equipment type number, construction material, electrical ratings, and expiry dates of the approval, which is valid for use in Zone 1 and Zone 2 hazardous areas of oil mines.
6G.Coded.Welder.CV
Miklos Ferentzi is a skilled welder with experience welding a variety of materials including stainless steel, duplex, carbon steel, titanium, inconel, and aluminum using techniques such as TIG, MIG, FCAW, and MMA. He has 6 years of work experience welding for companies in the UK, Australia, and Hungary. His most recent role is as a TIG and flux-core welder in Poole, UK where he welds heat exchangers, pipes, flanges, and pressure vessels for oil industries.
Similar to Hooter flameproof (13)
FEAM Enclosures - Hazardous Area & Explosion Proof Enclosures (ATEX, IECEx, I...
FEAM Enclosures - Hazardous Area & Explosion Proof Enclosures (ATEX, IECEx, I...
Recently uploaded
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Design and optimization of ion propulsion drone
Electric propulsion technology is widely used in many kinds of vehicles in recent years, and aircrafts are no exception. Technically, UAVs are electrically propelled but tend to produce a significant amount of noise and vibrations. Ion propulsion technology for drones is a potential solution to this problem. Ion propulsion technology is proven to be feasible in the earth’s atmosphere. The study presented in this article shows the design of EHD thrusters and power supply for ion propulsion drones along with performance optimization of high-voltage power supply for endurance in earth’s atmosphere.
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Rainfall intensity duration frequency curve statistical analysis and modeling...
Using data from 41 years in Patna’ India’ the study’s goal is to analyze the trends of how often it rains on a weekly, seasonal, and annual basis (1981−2020). First, utilizing the intensity-duration-frequency (IDF) curve and the relationship by statistically analyzing rainfall’ the historical rainfall data set for Patna’ India’ during a 41 year period (1981−2020), was evaluated for its quality. Changes in the hydrologic cycle as a result of increased greenhouse gas emissions are expected to induce variations in the intensity, length, and frequency of precipitation events. One strategy to lessen vulnerability is to quantify probable changes and adapt to them. Techniques such as log-normal, normal, and Gumbel are used (EV-I). Distributions were created with durations of 1, 2, 3, 6, and 24 h and return times of 2, 5, 10, 25, and 100 years. There were also mathematical correlations discovered between rainfall and recurrence interval.
Findings: Based on findings, the Gumbel approach produced the highest intensity values, whereas the other approaches produced values that were close to each other. The data indicates that 461.9 mm of rain fell during the monsoon season’s 301st week. However, it was found that the 29th week had the greatest average rainfall, 92.6 mm. With 952.6 mm on average, the monsoon season saw the highest rainfall. Calculations revealed that the yearly rainfall averaged 1171.1 mm. Using Weibull’s method, the study was subsequently expanded to examine rainfall distribution at different recurrence intervals of 2, 5, 10, and 25 years. Rainfall and recurrence interval mathematical correlations were also developed. Further regression analysis revealed that short wave irrigation, wind direction, wind speed, pressure, relative humidity, and temperature all had a substantial influence on rainfall.
Originality and value: The results of the rainfall IDF curves can provide useful information to policymakers in making appropriate decisions in managing and minimizing floods in the study area.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
AI assisted telemedicine KIOSK for Rural India.pptx
It gives the overall description of SIH problem statement " AI assisted telemedicine KIOSK for Rural India".
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
An improved modulation technique suitable for a three level flying capacitor ...
This research paper introduces an innovative modulation technique for controlling a 3-level flying capacitor multilevel inverter (FCMLI), aiming to streamline the modulation process in contrast to conventional methods. The proposed
simplified modulation technique paves the way for more straightforward and
efficient control of multilevel inverters, enabling their widespread adoption and
integration into modern power electronic systems. Through the amalgamation of
sinusoidal pulse width modulation (SPWM) with a high-frequency square wave
pulse, this controlling technique attains energy equilibrium across the coupling
capacitor. The modulation scheme incorporates a simplified switching pattern
and a decreased count of voltage references, thereby simplifying the control
algorithm.
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Recently uploaded (20)
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
Rainfall intensity duration frequency curve statistical analysis and modeling...
Rainfall intensity duration frequency curve statistical analysis and modeling...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
AI assisted telemedicine KIOSK for Rural India.pptx
AI assisted telemedicine KIOSK for Rural India.pptx
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
An improved modulation technique suitable for a three level flying capacitor ...
An improved modulation technique suitable for a three level flying capacitor ...
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
Hooter flameproof
- 1. ptransandcontrols@gmail.com PTRANS AND CONTROLS Fl.No.301 , Sr.No.32/9 , Oasis City , Near Zeal Collage , Narhe , Pune - 411041 Phone No.:- 9860868183/8329287300 Email :- ptransandcontrols@gmail.com FLAMPROOF HOOTER MATERIAL : Cast Aluminium Alloy LM-6. ENCLOSURE : Flameproof (Ex-d) as per IS/IEC60079- 1:2007 suitable for Installation in hazardous location zone – 1 & 2 . ENTRY : 2way to Multi way SUPPLY : 24 v dc / 230 V Dc RATING : Suitable for up to 230V & 440V. TERMINAL : YOUR REQUESTED AREA CLASIFIC : Gas group IIA, IIB as per IS/IEC 60079- 1:2007 FINISH : Epoxy POWDER COATING (SHADE NO. 631) STANDARD : IS / IEC 60079-1:2007 CERTIFICATE : Approved and certified by CIMFR Dhanbad for gas group IIA/IIB & IIC Zone 1 & 2.
- 2. ptransandcontrols@gmail.com Drawing Details :- 10. 70 120 GLAND ENTRY DEPTH- 93 DEPTH-93 55555768 235