This document provides installation and setup instructions for the AlarmNet GSMV cellular communicator. It includes information on mounting and wiring the module, programming it for various modes of operation through the AlarmNet website or programming tool, registering it with the AlarmNet network, viewing module status and identification information using programmer commands, and troubleshooting. The document contains specifications, compatibility details, and compliance information for the module.
Vizia rf + system programming and controlAlarm Grid
The document describes the Vizia RF+ home automation system, including its programming and control features. Key points:
- Vizia RF+ allows wireless control of lighting and appliances through remote controllers and programming devices.
- Programming requires a handheld remote controller or ThinkEssentials software to set up schedules, scenes, and network configuration.
- The system provides benefits like energy savings, multi-room lighting control, and integration of household devices.
The document provides product specifications for Leviton's ViziaRF+ plug-in modules for wireless home control systems. It describes three modules - a plug-in lamp dimming module, plug-in appliance module, and plug-in serial interface module. The lamp and appliance modules allow remote control of connected devices, including dimming and on/off switching. The serial interface module integrates the system with other home automation controllers.
Leviton vrs15 1 lz installation manual and setup guideAlarm Grid
This document provides installation instructions and warnings for a Vizia RF + electronic scene capable switch. It can be installed in single pole or 3-way wiring configurations. The switch communicates via radio frequency and must be included in a Z-Wave network to operate. The instructions describe preparing the wires, connecting them correctly, testing and operating the switch, and include troubleshooting tips. Safety warnings are provided to avoid shock and ensure proper installation.
Leviton vrs05 1 lz installation manual and setup guideAlarm Grid
This document provides installation instructions for a Scene Capable Incandescent Switch. It contains warnings to turn off power before installation and identifies tools needed. It describes identifying wiring applications and preparing/connecting wires for single pole, 3-way, or 3-way with remote switches. Instructions are provided on mounting the switch, restoring power, including the switch in a Z-Wave network, troubleshooting, programming features, and warranty information.
This document provides product specifications for the Vizia RF + Scene Capable Receptacle, which replaces a regular wall receptacle to allow for wireless ON/OFF control of electrical devices plugged into the receptacle. It can be controlled remotely using Vizia RF + Controllers or other Z-Wave controllers. The receptacle provides features such as scene control of multiple lights with one button, wireless mesh networking, a tamper-resistant design, transient surge protection, and compatibility with home automation systems. It is designed for residential use in applications up to 7,500 square feet with 128 devices or less.
Leviton vrp15 z Installation Instructions and Setup GuideAlarm Grid
The Scene Capable Plug-In Appliance Module is a Z-Wave enabled device that can be used to remotely control electrical loads plugged into it via a Z-Wave wireless network. It allows loads to be switched on or off and can be programmed to respond to scenes. The module plugs into a standard wall receptacle and loads plug into the module. It provides reliable wireless communication through a mesh network topology and is easy to install without new wiring. The document provides instructions on including the module in a Z-Wave network and troubleshooting tips.
Leviton vrp03 z product manual and setup guideAlarm Grid
This document provides installation instructions for a Scene Capable Plug-In Lamp Dimming Module rated for 120VAC, 60Hz. It can control incandescent loads between 300W and 14W. The summary includes instructions to install the module by attaching the lamp to be controlled, attaching the module to a wall receptacle, and including the module in a Z-Wave wireless network using a programmer/remote. It also describes operating and troubleshooting the module.
This document provides installation and setup instructions for the AlarmNet GSMV cellular communicator. It includes information on mounting and wiring the module, programming it for various modes of operation through the AlarmNet website or programming tool, registering it with the AlarmNet network, viewing module status and identification information using programmer commands, and troubleshooting. The document contains specifications, compatibility details, and compliance information for the module.
Vizia rf + system programming and controlAlarm Grid
The document describes the Vizia RF+ home automation system, including its programming and control features. Key points:
- Vizia RF+ allows wireless control of lighting and appliances through remote controllers and programming devices.
- Programming requires a handheld remote controller or ThinkEssentials software to set up schedules, scenes, and network configuration.
- The system provides benefits like energy savings, multi-room lighting control, and integration of household devices.
The document provides product specifications for Leviton's ViziaRF+ plug-in modules for wireless home control systems. It describes three modules - a plug-in lamp dimming module, plug-in appliance module, and plug-in serial interface module. The lamp and appliance modules allow remote control of connected devices, including dimming and on/off switching. The serial interface module integrates the system with other home automation controllers.
Leviton vrs15 1 lz installation manual and setup guideAlarm Grid
This document provides installation instructions and warnings for a Vizia RF + electronic scene capable switch. It can be installed in single pole or 3-way wiring configurations. The switch communicates via radio frequency and must be included in a Z-Wave network to operate. The instructions describe preparing the wires, connecting them correctly, testing and operating the switch, and include troubleshooting tips. Safety warnings are provided to avoid shock and ensure proper installation.
Leviton vrs05 1 lz installation manual and setup guideAlarm Grid
This document provides installation instructions for a Scene Capable Incandescent Switch. It contains warnings to turn off power before installation and identifies tools needed. It describes identifying wiring applications and preparing/connecting wires for single pole, 3-way, or 3-way with remote switches. Instructions are provided on mounting the switch, restoring power, including the switch in a Z-Wave network, troubleshooting, programming features, and warranty information.
This document provides product specifications for the Vizia RF + Scene Capable Receptacle, which replaces a regular wall receptacle to allow for wireless ON/OFF control of electrical devices plugged into the receptacle. It can be controlled remotely using Vizia RF + Controllers or other Z-Wave controllers. The receptacle provides features such as scene control of multiple lights with one button, wireless mesh networking, a tamper-resistant design, transient surge protection, and compatibility with home automation systems. It is designed for residential use in applications up to 7,500 square feet with 128 devices or less.
Leviton vrp15 z Installation Instructions and Setup GuideAlarm Grid
The Scene Capable Plug-In Appliance Module is a Z-Wave enabled device that can be used to remotely control electrical loads plugged into it via a Z-Wave wireless network. It allows loads to be switched on or off and can be programmed to respond to scenes. The module plugs into a standard wall receptacle and loads plug into the module. It provides reliable wireless communication through a mesh network topology and is easy to install without new wiring. The document provides instructions on including the module in a Z-Wave network and troubleshooting tips.
Leviton vrp03 z product manual and setup guideAlarm Grid
This document provides installation instructions for a Scene Capable Plug-In Lamp Dimming Module rated for 120VAC, 60Hz. It can control incandescent loads between 300W and 14W. The summary includes instructions to install the module by attaching the lamp to be controlled, attaching the module to a wall receptacle, and including the module in a Z-Wave wireless network using a programmer/remote. It also describes operating and troubleshooting the module.
Leviton vri10 1 lz product manual and setup guideAlarm Grid
The document provides installation instructions for a single pole or 3-way scene capable incandescent dimmer, including warnings to consult an electrician if unsure, only using the dimmer for incandescent or halogen fixtures, and that it is not compatible with standard 3-way switches. It details identifying the wiring configuration and connecting wires according to diagrams for single pole or 3-way installations. The instructions also cover including the dimmer in a Z-Wave network and testing operation before mounting in the wall box.
Leviton vri06 1 lz product manual and setup guideAlarm Grid
This document provides installation instructions for a single pole or 3-way scene capable incandescent dimmer. It contains warnings to only be installed according to electrical codes and by a qualified electrician. It also warns not to use the dimmer to control certain devices like fluorescent lights or motors. The instructions summarize identifying the wiring configuration, preparing the wires, and connecting the wires according to whether it is a single pole, 3-way with coordinating remote, or 3-way with matching remote installation. Diagrams illustrate the various wiring options and connection points on the dimmer and remote.
Leviton vrf01 1 lz product manual and setup guideAlarm Grid
This document provides installation instructions for a Leviton Vizia RF+ single pole or 3-way quiet fan speed control. It includes warnings, an introduction to Z-Wave technology, and step-by-step instructions for wiring the fan speed control in single pole or 3-way applications. The instructions also cover including the device in a Z-Wave network and advanced programming features for preset fan speeds and LED options.
This document provides installation instructions for a single pole or 3-way electronic low voltage dimmer. It includes wiring diagrams and steps for identifying the wiring type and preparing/connecting the wires for either a single pole, 3-way with coordinating remote, or 3-way with matching remote installation. The summary also describes features of the dimmer such as compatibility with other Z-Wave enabled devices and ease of installation without new wiring.
Leviton vrcz4 mr, vrcs4-mr, and vrc52-mr product specificationsAlarm Grid
The document provides product specifications for Leviton's ViziaRF+ combination devices, which allow for wireless control of lighting and home automation. The three devices summarized are: 1) A 4-button zone controller that controls up to four zones of lighting; 2) A 4-button scene controller that controls up to four lighting scenes; and 3) A 2-button scene controller that controls two lighting loads and scenes. All devices operate using Z-Wave wireless technology and allow integration of lighting control into homes.
The document provides product specifications for the ViziaRF+ line of wireless home control system controllers from Leviton Manufacturing Co. It includes:
- Descriptions of 6 controller models for remote control of lighting scenes and zones without wiring
- Details on setup and programming options using Z-Wave wireless technology
- Specifications on operating temperature and humidity ranges
- Diagrams of the controller models and wiring installations
- Information on ordering replacement faceplates and remote control accessories
Leviton vrcz1 installation manual and setup guideAlarm Grid
- The document provides instructions for including a 1-zone controller into a Z-Wave network using a Leviton Z-Wave programmer/remote. It involves placing the controller into programming mode, then selecting "include node" on the programmer/remote while standing close to the controller.
- After inclusion, the programmer/remote will assign a home ID, node ID and name for the controller. The document then provides instructions for updating the controller after all other devices have been included.
- The document outlines features of the 1-zone controller such as providing 3-way or 4-way control of lighting loads without traveler wires and two-way communication with dimming and brightness level LEDs.
The document provides installation instructions for a 1-scene controller. It outlines the steps to include the controller in a Z-Wave network using a programmer/remote, which includes putting the controller into programming mode, including it in the network while close to it, and updating the controller after inclusion. It also describes how to exclude the controller from the network and reset it to factory defaults if needed.
Leviton vp00 r 10z, vp00r-1lz, vp0sr-10z, vp0sr-1lz installation manual and s...Alarm Grid
This document provides installation instructions for Lutron 3-way or multi-location remote control devices. It includes warnings, tool requirements, wiring diagrams and step-by-step instructions for installing coordinating or matching remote devices in various 3-way, 4-way and multi-location circuit configurations. Maximum wire lengths and terminal identification is also provided.
Leviton dimmers, switches and fan speed controllersAlarm Grid
The document provides product specifications for Leviton's ViziaRF+ wireless lighting and home control system. It describes the system's wireless technology that creates a mesh network allowing command and control of lights, scenes and zones. Devices include dimmers, switches and a fan speed control that fit into standard wall boxes and provide local and remote control of various lighting loads. The system reduces energy usage and provides elegant lighting scenes and zones with one-button control.
Fluorescent dimmer for hi lume or eco-10 ballastsAlarm Grid
The document provides information about fluorescent dimmers from Leviton that are designed for use with Hi-lume or Eco-10 ballasts. It explains that when an energy saving lamp is used, the dimmer may not turn the lamp on due to the lamp not meeting the minimum wattage required by the ballast. It recommends ensuring the lamp type and wattage are compatible with the ballast in order for the dimmer to provide full on/off and dimming control.
Controlling z wave door locks with the vrc0 pAlarm Grid
This document provides recommendations for reliably controlling Z-Wave door locks with a VRC0P controller. It discusses challenges with battery-operated secure devices and outlines two key steps to ensure reliable communication: 1) Performing a rediscovery at -6dB or lower power level after inclusion, and 2) Completing RSS232 setup, reverse associations, and updating routes using installer tools. It also recommends incorporating a triggered delay when controlling multiple door locks simultaneously to avoid status updates colliding with control commands.
The document provides information on Leviton's Vizia+ collection of lighting controls and home automation products. It includes dimmers, switches, timers, and accessories that allow lighting and appliances to be controlled wirelessly. The Vizia+ products offer advanced lighting control features at a moderate cost and incorporate Z-Wave technology to enable wireless home automation functionality through scenes and zones. The document lists the various Vizia+ models and their specifications and features.
Alarm Grid Home Security http://www.alarmgrid.com/ has provided this pdf with the permission and courtesy of Honeywell.
Alarm Grid is a home security product and alarm monitoring company that loves its customers. We have a strong appreciation of the DIY community, and want to make sure that we not only provide the best products and services out there but we also want to make sure that resources like these Honeywell product pdfs are easily accessible so that or curious customers can find what they need when they need it.
Alarm Grid Home Security http://www.alarmgrid.com/ has provided this pdf with the permission and courtesy of Honeywell.
Alarm Grid is a home security product and alarm monitoring company that loves its customers. We have a strong appreciation of the DIY community, and want to make sure that we not only provide the best products and services out there but we also want to make sure that resources like these Honeywell product pdfs are easily accessible so that or curious customers can find what they need when they need it.
Alarm Grid Home Security http://www.alarmgrid.com/ has provided this pdf with the permission and courtesy of Honeywell.
Alarm Grid is a home security product and alarm monitoring company that loves its customers. We have a strong appreciation of the DIY community, and want to make sure that we not only provide the best products and services out there but we also want to make sure that resources like these Honeywell product pdfs are easily accessible so that or curious customers can find what they need when they need it.
This document is the programming guide for the ADEMCO VISTA-10P and VISTA-10PSIA security systems. It provides an overview of the various programming modes used to program the system, including data field programming, zone programming, output programming, and scheduling. Instructions are given for entering programming mode, navigating between data fields, and programming system options.
Alarm Grid Home Security http://www.alarmgrid.com/ has provided this pdf with the permission and courtesy of Honeywell.
Alarm Grid is a home security product and alarm monitoring company that loves its customers. We have a strong appreciation of the DIY community, and want to make sure that we not only provide the best products and services out there but we also want to make sure that resources like these Honeywell product pdfs are easily accessible so that or curious customers can find what they need when they need it.
The document provides installation instructions for replacing rechargeable battery kits in LYNXR-EN/LYNXR-ENSIA and LYNXR-I/LYNXR-ISIA series control panels. The 10 step process involves removing the old battery, installing the new battery kit which includes the battery pack and retainer, reconnecting the battery connector, and allowing 48 hours for the new battery to fully charge. Diagrams show the battery replacement for the LYNXR-EN and LYNXR-I control panels.
The document provides a programming guide for the LYNX Touch Security System. It outlines how to enter programming mode, program various data fields like system settings, zones, keys, and communications, and exit programming mode. Programmable options include changing installer code, setting the date and time, programming zones with attributes like zone type and description, and configuring communication paths and account numbers. The guide also includes diagrams of transmitter loop numbers and system connections.
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...APCO
The Radar reflects input from APCO’s teams located around the world. It distils a host of interconnected events and trends into insights to inform operational and strategic decisions. Issues covered in this edition include:
Storytelling is an incredibly valuable tool to share data and information. To get the most impact from stories there are a number of key ingredients. These are based on science and human nature. Using these elements in a story you can deliver information impactfully, ensure action and drive change.
Leviton vri10 1 lz product manual and setup guideAlarm Grid
The document provides installation instructions for a single pole or 3-way scene capable incandescent dimmer, including warnings to consult an electrician if unsure, only using the dimmer for incandescent or halogen fixtures, and that it is not compatible with standard 3-way switches. It details identifying the wiring configuration and connecting wires according to diagrams for single pole or 3-way installations. The instructions also cover including the dimmer in a Z-Wave network and testing operation before mounting in the wall box.
Leviton vri06 1 lz product manual and setup guideAlarm Grid
This document provides installation instructions for a single pole or 3-way scene capable incandescent dimmer. It contains warnings to only be installed according to electrical codes and by a qualified electrician. It also warns not to use the dimmer to control certain devices like fluorescent lights or motors. The instructions summarize identifying the wiring configuration, preparing the wires, and connecting the wires according to whether it is a single pole, 3-way with coordinating remote, or 3-way with matching remote installation. Diagrams illustrate the various wiring options and connection points on the dimmer and remote.
Leviton vrf01 1 lz product manual and setup guideAlarm Grid
This document provides installation instructions for a Leviton Vizia RF+ single pole or 3-way quiet fan speed control. It includes warnings, an introduction to Z-Wave technology, and step-by-step instructions for wiring the fan speed control in single pole or 3-way applications. The instructions also cover including the device in a Z-Wave network and advanced programming features for preset fan speeds and LED options.
This document provides installation instructions for a single pole or 3-way electronic low voltage dimmer. It includes wiring diagrams and steps for identifying the wiring type and preparing/connecting the wires for either a single pole, 3-way with coordinating remote, or 3-way with matching remote installation. The summary also describes features of the dimmer such as compatibility with other Z-Wave enabled devices and ease of installation without new wiring.
Leviton vrcz4 mr, vrcs4-mr, and vrc52-mr product specificationsAlarm Grid
The document provides product specifications for Leviton's ViziaRF+ combination devices, which allow for wireless control of lighting and home automation. The three devices summarized are: 1) A 4-button zone controller that controls up to four zones of lighting; 2) A 4-button scene controller that controls up to four lighting scenes; and 3) A 2-button scene controller that controls two lighting loads and scenes. All devices operate using Z-Wave wireless technology and allow integration of lighting control into homes.
The document provides product specifications for the ViziaRF+ line of wireless home control system controllers from Leviton Manufacturing Co. It includes:
- Descriptions of 6 controller models for remote control of lighting scenes and zones without wiring
- Details on setup and programming options using Z-Wave wireless technology
- Specifications on operating temperature and humidity ranges
- Diagrams of the controller models and wiring installations
- Information on ordering replacement faceplates and remote control accessories
Leviton vrcz1 installation manual and setup guideAlarm Grid
- The document provides instructions for including a 1-zone controller into a Z-Wave network using a Leviton Z-Wave programmer/remote. It involves placing the controller into programming mode, then selecting "include node" on the programmer/remote while standing close to the controller.
- After inclusion, the programmer/remote will assign a home ID, node ID and name for the controller. The document then provides instructions for updating the controller after all other devices have been included.
- The document outlines features of the 1-zone controller such as providing 3-way or 4-way control of lighting loads without traveler wires and two-way communication with dimming and brightness level LEDs.
The document provides installation instructions for a 1-scene controller. It outlines the steps to include the controller in a Z-Wave network using a programmer/remote, which includes putting the controller into programming mode, including it in the network while close to it, and updating the controller after inclusion. It also describes how to exclude the controller from the network and reset it to factory defaults if needed.
Leviton vp00 r 10z, vp00r-1lz, vp0sr-10z, vp0sr-1lz installation manual and s...Alarm Grid
This document provides installation instructions for Lutron 3-way or multi-location remote control devices. It includes warnings, tool requirements, wiring diagrams and step-by-step instructions for installing coordinating or matching remote devices in various 3-way, 4-way and multi-location circuit configurations. Maximum wire lengths and terminal identification is also provided.
Leviton dimmers, switches and fan speed controllersAlarm Grid
The document provides product specifications for Leviton's ViziaRF+ wireless lighting and home control system. It describes the system's wireless technology that creates a mesh network allowing command and control of lights, scenes and zones. Devices include dimmers, switches and a fan speed control that fit into standard wall boxes and provide local and remote control of various lighting loads. The system reduces energy usage and provides elegant lighting scenes and zones with one-button control.
Fluorescent dimmer for hi lume or eco-10 ballastsAlarm Grid
The document provides information about fluorescent dimmers from Leviton that are designed for use with Hi-lume or Eco-10 ballasts. It explains that when an energy saving lamp is used, the dimmer may not turn the lamp on due to the lamp not meeting the minimum wattage required by the ballast. It recommends ensuring the lamp type and wattage are compatible with the ballast in order for the dimmer to provide full on/off and dimming control.
Controlling z wave door locks with the vrc0 pAlarm Grid
This document provides recommendations for reliably controlling Z-Wave door locks with a VRC0P controller. It discusses challenges with battery-operated secure devices and outlines two key steps to ensure reliable communication: 1) Performing a rediscovery at -6dB or lower power level after inclusion, and 2) Completing RSS232 setup, reverse associations, and updating routes using installer tools. It also recommends incorporating a triggered delay when controlling multiple door locks simultaneously to avoid status updates colliding with control commands.
The document provides information on Leviton's Vizia+ collection of lighting controls and home automation products. It includes dimmers, switches, timers, and accessories that allow lighting and appliances to be controlled wirelessly. The Vizia+ products offer advanced lighting control features at a moderate cost and incorporate Z-Wave technology to enable wireless home automation functionality through scenes and zones. The document lists the various Vizia+ models and their specifications and features.
Alarm Grid Home Security http://www.alarmgrid.com/ has provided this pdf with the permission and courtesy of Honeywell.
Alarm Grid is a home security product and alarm monitoring company that loves its customers. We have a strong appreciation of the DIY community, and want to make sure that we not only provide the best products and services out there but we also want to make sure that resources like these Honeywell product pdfs are easily accessible so that or curious customers can find what they need when they need it.
Alarm Grid Home Security http://www.alarmgrid.com/ has provided this pdf with the permission and courtesy of Honeywell.
Alarm Grid is a home security product and alarm monitoring company that loves its customers. We have a strong appreciation of the DIY community, and want to make sure that we not only provide the best products and services out there but we also want to make sure that resources like these Honeywell product pdfs are easily accessible so that or curious customers can find what they need when they need it.
Alarm Grid Home Security http://www.alarmgrid.com/ has provided this pdf with the permission and courtesy of Honeywell.
Alarm Grid is a home security product and alarm monitoring company that loves its customers. We have a strong appreciation of the DIY community, and want to make sure that we not only provide the best products and services out there but we also want to make sure that resources like these Honeywell product pdfs are easily accessible so that or curious customers can find what they need when they need it.
This document is the programming guide for the ADEMCO VISTA-10P and VISTA-10PSIA security systems. It provides an overview of the various programming modes used to program the system, including data field programming, zone programming, output programming, and scheduling. Instructions are given for entering programming mode, navigating between data fields, and programming system options.
Alarm Grid Home Security http://www.alarmgrid.com/ has provided this pdf with the permission and courtesy of Honeywell.
Alarm Grid is a home security product and alarm monitoring company that loves its customers. We have a strong appreciation of the DIY community, and want to make sure that we not only provide the best products and services out there but we also want to make sure that resources like these Honeywell product pdfs are easily accessible so that or curious customers can find what they need when they need it.
The document provides installation instructions for replacing rechargeable battery kits in LYNXR-EN/LYNXR-ENSIA and LYNXR-I/LYNXR-ISIA series control panels. The 10 step process involves removing the old battery, installing the new battery kit which includes the battery pack and retainer, reconnecting the battery connector, and allowing 48 hours for the new battery to fully charge. Diagrams show the battery replacement for the LYNXR-EN and LYNXR-I control panels.
The document provides a programming guide for the LYNX Touch Security System. It outlines how to enter programming mode, program various data fields like system settings, zones, keys, and communications, and exit programming mode. Programmable options include changing installer code, setting the date and time, programming zones with attributes like zone type and description, and configuring communication paths and account numbers. The guide also includes diagrams of transmitter loop numbers and system connections.
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...APCO
The Radar reflects input from APCO’s teams located around the world. It distils a host of interconnected events and trends into insights to inform operational and strategic decisions. Issues covered in this edition include:
Storytelling is an incredibly valuable tool to share data and information. To get the most impact from stories there are a number of key ingredients. These are based on science and human nature. Using these elements in a story you can deliver information impactfully, ensure action and drive change.
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This PowerPoint compilation offers a comprehensive overview of 20 leading innovation management frameworks and methodologies, selected for their broad applicability across various industries and organizational contexts. These frameworks are valuable resources for a wide range of users, including business professionals, educators, and consultants.
Each framework is presented with visually engaging diagrams and templates, ensuring the content is both informative and appealing. While this compilation is thorough, please note that the slides are intended as supplementary resources and may not be sufficient for standalone instructional purposes.
This compilation is ideal for anyone looking to enhance their understanding of innovation management and drive meaningful change within their organization. Whether you aim to improve product development processes, enhance customer experiences, or drive digital transformation, these frameworks offer valuable insights and tools to help you achieve your goals.
INCLUDED FRAMEWORKS/MODELS:
1. Stanford’s Design Thinking
2. IDEO’s Human-Centered Design
3. Strategyzer’s Business Model Innovation
4. Lean Startup Methodology
5. Agile Innovation Framework
6. Doblin’s Ten Types of Innovation
7. McKinsey’s Three Horizons of Growth
8. Customer Journey Map
9. Christensen’s Disruptive Innovation Theory
10. Blue Ocean Strategy
11. Strategyn’s Jobs-To-Be-Done (JTBD) Framework with Job Map
12. Design Sprint Framework
13. The Double Diamond
14. Lean Six Sigma DMAIC
15. TRIZ Problem-Solving Framework
16. Edward de Bono’s Six Thinking Hats
17. Stage-Gate Model
18. Toyota’s Six Steps of Kaizen
19. Microsoft’s Digital Transformation Framework
20. Design for Six Sigma (DFSS)
To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations
Profiles of Iconic Fashion Personalities.pdfTTop Threads
The fashion industry is dynamic and ever-changing, continuously sculpted by trailblazing visionaries who challenge norms and redefine beauty. This document delves into the profiles of some of the most iconic fashion personalities whose impact has left a lasting impression on the industry. From timeless designers to modern-day influencers, each individual has uniquely woven their thread into the rich fabric of fashion history, contributing to its ongoing evolution.
The Most Inspiring Entrepreneurs to Follow in 2024.pdfthesiliconleaders
In a world where the potential of youth innovation remains vastly untouched, there emerges a guiding light in the form of Norm Goldstein, the Founder and CEO of EduNetwork Partners. His dedication to this cause has earned him recognition as a Congressional Leadership Award recipient.
Starting a business is like embarking on an unpredictable adventure. It’s a journey filled with highs and lows, victories and defeats. But what if I told you that those setbacks and failures could be the very stepping stones that lead you to fortune? Let’s explore how resilience, adaptability, and strategic thinking can transform adversity into opportunity.
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
The Genesis of BriansClub.cm Famous Dark WEb PlatformSabaaSudozai
BriansClub.cm, a famous platform on the dark web, has become one of the most infamous carding marketplaces, specializing in the sale of stolen credit card data.
Part 2 Deep Dive: Navigating the 2024 Slowdownjeffkluth1
Introduction
The global retail industry has weathered numerous storms, with the financial crisis of 2008 serving as a poignant reminder of the sector's resilience and adaptability. However, as we navigate the complex landscape of 2024, retailers face a unique set of challenges that demand innovative strategies and a fundamental shift in mindset. This white paper contrasts the impact of the 2008 recession on the retail sector with the current headwinds retailers are grappling with, while offering a comprehensive roadmap for success in this new paradigm.
HR search is critical to a company's success because it ensures the correct people are in place. HR search integrates workforce capabilities with company goals by painstakingly identifying, screening, and employing qualified candidates, supporting innovation, productivity, and growth. Efficient talent acquisition improves teamwork while encouraging collaboration. Also, it reduces turnover, saves money, and ensures consistency. Furthermore, HR search discovers and develops leadership potential, resulting in a strong pipeline of future leaders. Finally, this strategic approach to recruitment enables businesses to respond to market changes, beat competitors, and achieve long-term success.
The Steadfast and Reliable Bull: Taurus Zodiac Signmy Pandit
Explore the steadfast and reliable nature of the Taurus Zodiac Sign. Discover the personality traits, key dates, and horoscope insights that define the determined and practical Taurus, and learn how their grounded nature makes them the anchor of the zodiac.
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Tastemy Pandit
Know what your zodiac sign says about your taste in food! Explore how the 12 zodiac signs influence your culinary preferences with insights from MyPandit. Dive into astrology and flavors!
Garments ERP Software in Bangladesh _ Pridesys IT Ltd.pdfPridesys IT Ltd.
Pridesys Garments ERP is one of the leading ERP solution provider, especially for Garments industries which is integrated with
different modules that cover all the aspects of your Garments Business. This solution supports multi-currency and multi-location
based operations. It aims at keeping track of all the activities including receiving an order from buyer, costing of order, resource
planning, procurement of raw materials, production management, inventory management, import-export process, order
reconciliation process etc. It’s also integrated with other modules of Pridesys ERP including finance, accounts, HR, supply-chain etc.
With this automated solution you can easily track your business activities and entire operations of your garments manufacturing
proces
Discover innovative uses of Revit in urban planning and design, enhancing city landscapes with advanced architectural solutions. Understand how architectural firms are using Revit to transform how processes and outcomes within urban planning and design fields look. They are supplementing work and putting in value through speed and imagination that the architects and planners are placing into composing progressive urban areas that are not only colorful but also pragmatic.
Cover Story - China's Investment Leader - Dr. Alyce SUmsthrill
In World Expo 2010 Shanghai – the most visited Expo in the World History
https://www.britannica.com/event/Expo-Shanghai-2010
China’s official organizer of the Expo, CCPIT (China Council for the Promotion of International Trade https://en.ccpit.org/) has chosen Dr. Alyce Su as the Cover Person with Cover Story, in the Expo’s official magazine distributed throughout the Expo, showcasing China’s New Generation of Leaders to the World.
NIMA2024 | De toegevoegde waarde van DEI en ESG in campagnes | Nathalie Lam |...BBPMedia1
Nathalie zal delen hoe DEI en ESG een fundamentele rol kunnen spelen in je merkstrategie en je de juiste aansluiting kan creëren met je doelgroep. Door middel van voorbeelden en simpele handvatten toont ze hoe dit in jouw organisatie toegepast kan worden.
1. GSM Communicators
iGSMV/GSMV/iGSMHS GSMCF
G
GSMX GSMVLP GSMVLP5 VISTA-GSM SERVICE
Honeywell is focused on providing the best alarm communication This groundbreaking communications solution offers full data
solutions for the security industry. Alternative communication reporting and uploading/downloading with most Honeywell
methods are critical in the marketplace due to VoIP, migration control panels. In addition, with onboard zone inputs and
from POTS and global growth of digital networks. optional dialer capture capability, we’re compatible with
other manufacturers’ security panels as well. Honeywell
Honeywell’s Digital Cellular Communicators deliver secure,
communication products and control panels combine to
reliable and complementary digital communications via
make installations faster and easier.
the GSM (Global System for Mobile) network. Our use of
Dual-Path GPRS service with SMS backup provides substantial All signals are delivered to Honeywell’s AlarmNet® Network
benefits to protect your investment, helping to maintain and Control Center, which routes the information to the appropriate
grow your recurring revenue. central station. The state-of-the-art AlarmNet Network Control
Center is fully redundant and monitored 24/7. AlarmNet
has the ability to route messages using AlarmNet-i and
800 PLUS services, providing true redundancy and multi-path
message delivery.
FEATURES
• Full Contact ID or ADEMCO • Integration • Web-Based Programming
High-Speed Reporting Quick and easy installation of GSM Allows complete interactive
Contact ID reporting using ECP mode for VISTA and LYNX controls. programming from AlarmNet Direct.
with compatible Honeywell control https://services.alarmnet.com
• Dynamic Signaling with Certain
panels or combined with optional /AlarmnetDirect
Honeywell Control Panels
dialer capture for non-ECP capable
Provides management of control • Intelligent Supervision
control panels.
panel dialer and digital cellular Any message generated serves as
• 256-bit AES Encryption communicator. Programmable priority a supervision message per optional
Advanced encryption standard used and delays determine signal path. 24 hour or 30 day intervals. This
for secure communications. feature effectively limits required
• Diagnostic LEDs
messages to be sent.
• Dual-Path Technology Provide signal strength and status
Uses GPRS (General Packet Radio indications. • Remote Services Capability*
Service) as primary digital cellular Optional Total Connect value-added
• QOS
path and automatically switches web-based or SMS system control as
Quality of Service diagnostics via
to SMS (Short Message Service) well as e-mail notification of system
AlarmNet supply vital information
if GPRS is unavailable. events.
including when a message was
• Triple-Path Technology received, battery voltage, input • Two-Way Voice Transport
Provides three paths of communication voltage, signal strength and GSM voice channel capable to allow
using Internet, GPRS (General Packet message path. two-way voice session in conjunction
Radio Service), and SMS (Short with an audio verification system.
• Commercial Fire Communicator
Message Service). Uses Internet as (GSMX/iGSMV/GSMV/iGSMHS)
Code compliant fire communication
primary with dual GSM technology
approved to replace one or both • Line Security
as back-up. GSM path utilizes GPRS
phone lines (standalone) in Approved for line security applications
and automatically switches to SMS if
commercial fire applications. with 200-second supervision intervals.
GPRS is unavailable (iGSMV only).
See agency listings for details. (iGSMHS)
• Upload/Download
With select Honeywell control panels
using GPRS. Requires Compass
*Service subscription required.
version 1.5.8.54a or higher.
2. GSM Communicators
FEATURES
Features that apply to the iGSMV/GSMV and iGSMHS
• Universal Control Panel • Dialer Capture Ready • Tamper Protected Enclosure
Compatibility Compatible with Dialer Capture Built-in tamper sends a report when
Flexible modes of operation allow Intelligence Device DCID (for LYNX) a tamper condition is detected and
ECP alarm reporting by Honeywell or DCID-EXT (other control panels). a restore when cleared.
control panels, 4204 relay mode Captures Contact ID messages from
• Built-in Power Supply
for Honeywell controls (that do not the panel’s phone line and sends
Onboard charging circuit design
support ECP alarm reporting) and them to the central station via the
accommodates back-up battery.
zone triggering for use with other GSM radio (not agency approved).
Includes primary power and battery
control panels. (GSMV only) (GSMV only)
supervision.
• Six Input Zones
• Back-Up Battery
Digital processing for improved
6V 3.1Ah supplied to deliver up to
detection and false alarm protection
24 hours of standby operation.
SPECIFICATIONS
iGSMHS
Description • Current Drain: 35mA average Environmental
• Encrypted line security communication standby, 500mA peak transmit • Operating temperature:
Physical • Fault Relay Output: Open collector, -20º to 55º C
• Dimensions: 8.4" x 8.0" x 1.5" 12VDC, .25W max. • Storage temperature: -40º to 70º C
• Weight: 2.4 lbs. with battery • Input Trigger Levels: (V+) 6V – 13V; • Humidity: 0 to 95% relative humidity,
Electrical (V-) 0V – 1V non-condensing
• Input Power: 9VAC, 15VA transformer, RF • Altitude: to 10,000 ft. operating; to
Honeywell Model No. 1332 • Transceiver Type: Tri-Band GSM/ 40,000 ft. storage
• Backup Battery: 6V, 3.1AH, GPRS Class 10
Honeywell Part No. K14139, (included) • Modulation: GMSK
• Expected Battery Life: 5 years approx. • Antenna: Internal GSM quad-band
1.3dBi gain
GSMVLP (LYNX Plus only)/GSMVLP5 (LYNX Touch only)
Description Electrical Antenna
• Voice capable, quad band digital • Powered and battery backed directly • Quad Band: GSM 850, 900,
cellular communicator for use from L3000 Control 1800 & 1900
with L3000/L5000 series controls • Input Voltage: • VSWR: 3:1
• Uses an integrated quad band 10.5VDC nominal (GSMVLP) • Peak Gain: 3 dBi
antenna that eliminates the coaxial 5VDC nominal (GSMVLP5) • Impedance: 50 ohms
cable connections for a high reliability • Quiescent Current: • Polarization: linear
RF interface 40mA (GSMVLP)
Physical 15mA (GSMVLP5)
• Dimensions: • Average Current During Transmit:
5.5" x 2.5" (GSMVLP) 200mA (GSMVLP)
4.75" x 2.5" (GSMVLP5) 300mA (GSMVLP5)
GSMX
Description Electrical • Dialer Capture Ready: Compatible
• Quad band digital cellular • Input Voltage: 12VDC with Dialer Capture Intelligence
communicator for use with ECP (powered via the ECP bus) Device DCID (for LYNX) or DCID-EXT
capable Honeywell control panels • Standby Current: 30mA (other control panels). Captures
• Supports cabinet mount or may • Transmit Current: 200mA (Average) Contact ID messages from the
be remotely located • Transceiver Type: GSM/GPRS with panel’s phone line and sends them
Physical internal antenna to the central station via the GSM
radio (not agency approved).
• Dimensions: 4" x 7" x 1.75"
2
3. GSM Communicators
SPECIFICATIONS
VISTA-GSM
Physical VISTA-GSM Antenna • Polarization: Vertical
• Dimensions: 2.2" x 4.0" • Type: Dual band, dipole • Dimensions: 161mm x 26mm
Electrical • VSWR: <2:1 • Gain (Peak): 0-4 dBi
• Input Voltage: 4.1V • Bands: 824-896 MHz, • Connector Type: SMA male
• Peak Current During Transmit: 1.6A 1850-1990 MHz
• Quiescent Current: 20mA • Impedance: 50 ohms
*Standalone listing does not require a separate listed DACT.
Communications Device Agency Listings (U.S.) **Primary/backup listing requires use of a listed DACT.
Communication Testing
Devices Description Commercial Standards Residential Standards
Agency
UL1610
UL365 Police Central UL1635 Encrypted Line
Connected Station Digital Alarm Security California
Burglar Alarm UL609 Local Burglar Alarm Communications (Grade AA) UL864 State Fire UL1023 UL985
Commercial Burglar Alarm Commercial Commercial Commercial UL864 Primary/ Marshall Household Household
Burglar Systems Burglar Burglar Burglar Standalone* Backup** (CSFM) Burglar Alarm Fire
AlarmNet-G
Commercial Fire Kit
GSMCF (GSMV included)
UL/ETL 3 3 3 3 3 3 3 3
GSMV GSM Cellular (ETL Only) (UL Only) (ETL Only)
Communicator
Line Security
iGSMHS
Communicator
UL 3 3 3 3 3 3
GSM Communication
GSMVLP
Module for LYNX Plus
ETL 3 3 3
GSM Communication
GSMVLP5
Module for LYNX Touch
ETL 3 3 3
GSM Cellular
GSMX
Communicator
ETL 3 3 3
iGSMCF Internet/GSM Cellular
ETL
iGSMV Communicator 3 3 3 3 3 3
Snap-in GSM
VISTA-GSM Communication Module ETL 3 3 3 3 3 3 3
for VISTA-21iP Control
Communications Device Agency Listings (Canada)
Communication Description Testing Agency Canadian Standards
Devices
ULC-S304
ULC-S545
ULC-S303 Central and ULC/ORD-C1023
Residential Fire ULC-S559
Local Burglar Alarm Monitoring Station Household Burglar
Warning System
Burglar Alarm
AlarmNet-G
GSMCN cUL/ULC
GSM Cellular
Communicator
3 3 3 3 3
GSMVCN cETL
Snap-in GSM Communication
GSMLCN
Module for LYNX Control
ETL 3 3 3 3
GSM Communicator Module
GSMVLPCN
for LYNX Plus
ETL 3 3
GSM Communicator Module
GSMVLP5CN
for LYNX Touch
ETL 3 3
GSM Cellular
GSMXCN
Communicator
ETL 3 3
iGSMCN Internet/GSM Cellular
iGSMVCN Communicator
cUL/ULC 3 3 3 3 3
Snap-in GSM
VISTA-GSMCN Communication Module ETL 3 3 3 3
for VISTA-21iP Control
3