HemaBlock 5-Step R.A.P.I.D. Application Procedure.

1. HemaBlock Hemostatic Powder Application
R.A.P.I.D.
5-Step R.A.P.I.D. Application Procedure
For successful results the “HemaBlock 5-Step R.A.P.I.D. Application Procedure”
should be followed.

2. HemaBlock Hemostatic Powder Application
R.A.P.I.D.
Remove excess blood to easily identify bleeders and allow applying
HemaBlock Powder directly on the active bleeders.

3. HemaBlock Hemostatic Powder Application
R.A.P.I.D.
Apply liberal amount of HemaBlock Powder on the bleeders.
• Be sure to completely cover the bleeding area.
• Deep wounds like biopsy may require equally deep application of powder.

4. HemaBlock Hemostatic Powder Application
R.A.P.I.D.
Pressure Enough pressure needs to be applied to stop the flow of the bleeders
for approximately 1 to 2 minutes to allow time for HemaBlock Powder to create the
clot.
• Use gloved finger or non-stick pad to hold pressure

5. HemaBlock Hemostatic Powder Application
R.A.P.I.D.
Irrigatethe wound area with saline solution to remove excess powder to check
for bleeders might have missed and visualize hemostasis.

6. HemaBlock Hemostatic Powder Application
R.A.P.I.D.
Deliveredhemostasis (clotting) is evident after irrigation and the wound site is
ready for traditional closure methods.

7. HemaBlock Hemostatic Powder Application
R.A.P.I.D.
5-Step R.A.P.I.D. Application Procedure