This document provides technical specifications and performance data for a line of hydraulic motors and brakes. It includes charts showing torque, speed, pressure and flow ratings. It also provides guidelines for installation, operation, and circuit design. Safety precautions are outlined for proper use of motors, brakes and motor/brake combinations. Dimensional drawings and ordering information are provided for different motor series and models.
The document discusses certificates that can be provided with Lönne electric motors. It describes four types of certificates according to EN 10204: Type 2.1 is a declaration of compliance, Type 2.2 is a test report with non-specific inspection results, Type 3.1 is an inspection certificate issued by the manufacturer with test results, and Type 3.2 is an inspection certificate prepared by both the manufacturer and purchaser representatives with test results. It also states that motors will be tested in the company's test field or an external institute, and that marine classification bureaus provide type approval certificates.
The document provides information about Dodge Quantis reducers and gearmotors that can be assembled at the Menden build center in Germany. It includes selection guides and part numbers for inline helical (ILH), right angle helical bevel (RHB), and motorized shaft mount (MSM) product configurations. Variant codes are listed to specify required instructions and options for build center quotes and orders.
This document provides information on ABB's BSM N-series AC servo motors, including:
- The BSM N-series provides low inertia and high torque for excellent dynamic performance and high machine throughput.
- Motors are available in sizes from 50mm to 100mm frame sizes with continuous torques ranging from 3.9 lb-in to 354 lb-in.
- Performance curves and specifications are provided for various motor models.
Электродвигатели постоянного тока Bonfiglioli BCArve
The document provides specifications for Bonfiglioli permanent magnet DC motors that are suitable for operating in temperatures ranging from -20°C to +40°C. It discusses factors that affect motor power output, including duty cycle, speed, supply form factor, temperature, and altitude. Dimensional variations are shown for motors fitted with brakes. Technical specifications like voltage, speed, power, torque, current, and moment of inertia are given for different motor types and sizes.
The document contains a series of check marks and symbols with no clear context or meaning. It is not possible to determine what the document is about or summarize its content in 3 sentences or less due to the lack of coherent information.
This document provides assembly and operating instructions for planetary gear units. It begins with an introduction and covers technical data, supply conditions, packing/handling, installation, lubrication, checks, maintenance, scrap disposal, oil plug positions, weight/oil quantities, and multi-disc brakes. The instructions provide details on receiving, storing, installing flange, foot and shaft-mounted gear units. It emphasizes ensuring proper lubrication and maintenance for safe and efficient operation.
This document provides technical specifications and performance data for a line of hydraulic motors and brakes. It includes charts showing torque, speed, pressure and flow ratings. It also provides guidelines for installation, operation, and circuit design. Safety precautions are outlined for proper use of motors, brakes and motor/brake combinations. Dimensional drawings and ordering information are provided for different motor series and models.
The document discusses certificates that can be provided with Lönne electric motors. It describes four types of certificates according to EN 10204: Type 2.1 is a declaration of compliance, Type 2.2 is a test report with non-specific inspection results, Type 3.1 is an inspection certificate issued by the manufacturer with test results, and Type 3.2 is an inspection certificate prepared by both the manufacturer and purchaser representatives with test results. It also states that motors will be tested in the company's test field or an external institute, and that marine classification bureaus provide type approval certificates.
The document provides information about Dodge Quantis reducers and gearmotors that can be assembled at the Menden build center in Germany. It includes selection guides and part numbers for inline helical (ILH), right angle helical bevel (RHB), and motorized shaft mount (MSM) product configurations. Variant codes are listed to specify required instructions and options for build center quotes and orders.
This document provides information on ABB's BSM N-series AC servo motors, including:
- The BSM N-series provides low inertia and high torque for excellent dynamic performance and high machine throughput.
- Motors are available in sizes from 50mm to 100mm frame sizes with continuous torques ranging from 3.9 lb-in to 354 lb-in.
- Performance curves and specifications are provided for various motor models.
Электродвигатели постоянного тока Bonfiglioli BCArve
The document provides specifications for Bonfiglioli permanent magnet DC motors that are suitable for operating in temperatures ranging from -20°C to +40°C. It discusses factors that affect motor power output, including duty cycle, speed, supply form factor, temperature, and altitude. Dimensional variations are shown for motors fitted with brakes. Technical specifications like voltage, speed, power, torque, current, and moment of inertia are given for different motor types and sizes.
The document contains a series of check marks and symbols with no clear context or meaning. It is not possible to determine what the document is about or summarize its content in 3 sentences or less due to the lack of coherent information.
This document provides assembly and operating instructions for planetary gear units. It begins with an introduction and covers technical data, supply conditions, packing/handling, installation, lubrication, checks, maintenance, scrap disposal, oil plug positions, weight/oil quantities, and multi-disc brakes. The instructions provide details on receiving, storing, installing flange, foot and shaft-mounted gear units. It emphasizes ensuring proper lubrication and maintenance for safe and efficient operation.
Here are the characteristics of horizontal underwater micro and mini hydroelectric power plants type hydro reactor that can be used for various purposes from the connection of welding tools at the bottom to enable charging, unmanned mini submarines and robots.
We manufacture engine dynamo meter for performance & endurance of petrol engine test, diesel engine test, gasoline engine test, kerosene engine test. Eddy current dynamo meters to test engines are manufactured up to 900 kw, up to 5000 NM torque capacity, speed up to 30000 rpm. Engine dynamo meters are offered with PC based control panel with our proprietary window based engine testing software for SCADA based data acquisition & control. Manual dynamo meter controllers for torque controls & torque & speed indications are also offered as basic dynamo meter controls. Accessories such as fuel measurement, temperature measurements, pressure measurements, crank angle position detection, engine mounting test bed with T slot having X, Y & Z adjustment for length, width & height adjustments is also offered along with engine testing dynamo meter. Contact us with details of your requirements.
4.2.12 Оборудование для промышленной автоматизацииIgor Golovin
Оборудование для промышленной автоматизации включает в себя:
- Электродвигатели серий АИР и АИС
- Преобразователи частоты Control С600
- Преобразователи частоты Control L620
- Преобразователи частоты Control H800
This document provides an overview of Pepperl+Fuchs' components and solutions for process automation. It discusses their focus on customer requirements and innovation in automation technologies. It also lists interface technology, remote I/O systems, fieldbus infrastructure, HMI solutions, explosion protection equipment, and customized solutions as part of their product portfolio.
The document provides technical specifications and dimensional drawings for various models of the LC series of planetary gear units, including the LC 050, LC 070, LC 090, LC 120, and LC 155. It includes details on symbols and definitions, selecting the appropriate gear unit based on application requirements, service life calculations for bearings, features of the LC series, ordering codes, and dimensional drawings with specifications for each model. Key information covered includes torque and speed ratings, bearing life, available ratios and motor couplings, dimensions, mass moments of inertia, and more. The document is a product catalogue for selecting and specifying the proper LC gear unit for given application needs.
HIDRAPAC is a manufacturer of hydraulic components for mobile industries. They produce high quality pumps, motors, valves and other components. HIDRAPAC prides itself on innovation, flexibility, and providing customized solutions to meet customer needs. Their products are used in construction equipment, agriculture, material handling, and other mobile machine industries worldwide.
The document is a catalog for LAK DC motors that provides specifications for various models. It includes information on power ratings from 1-500 kW, torque ratings from 30-4500 Nm, cooling options, mounting configurations, standards compliance, and performance data for different frame sizes. Dimensional drawings and ordering information are also referenced.
The document describes DC drive solutions from Control Techniques, including their Mentor MP and Quantum MP DC drives. The Mentor MP and Quantum MP are advanced digital DC drives that provide reliable motor control and flexible system interfacing capabilities. They integrate control functionality from Emerson's Unidrive SP AC drive and include options for expanded I/O, communications, feedback and automation capabilities through add-in modules. The drives can interface with modern industrial networks and are suitable for new DC motor applications as well as upgrades to existing DC motor systems.
This document provides specifications for motor bell housings used to connect electrical motors to gear reducers. It includes general specifications, assembly instructions, designation codes, verification requirements, dimensions for different frame sizes and gearbox combinations. Key information includes permissible bending moments and input power for different motor/gearbox configurations, dimensions for mounting the bell housings, mass properties, and designation codes for housing variants. Design features are also summarized, such as the housing material and available coupling types.
Rex and Link-Belt Spherical Roller Bearing Units RexnordArve
This document provides an overview and catalog of Rex and Link-Belt spherical roller bearing units. It includes sections on Rex spherical roller bearing units features and benefits, shaft mounting styles, seal ratings and speed limits, nomenclature, engineering selection guides, and housing styles. It also includes sections on Link-Belt spherical roller bearing units features and benefits, seal ratings and speed limits, nomenclature, engineering selection guides, housing styles, and replacement parts. The document serves as a reference for different bearing unit product lines, specifications, and application guides.
2. Содержание
+49 (0)40 / 853 771 – 0 info@hansa-motoren.de
HANSA-MOTOREN
Разделы Страница
Основные сведения 01
Технические данные 05
Габаритные и присоединительные размеры 11
4. Общие сведения
+49 (0)40 / 853 771 – 0 info@hansa-motoren.de
HANSA-MOTOREN
2
Стандарты
Электрика
IEC EN Содержани
IEC 60034-1 EN 60034-1 Общие сведения
IEC 60034-8 EN 60034-8 Направление вращения + соединение клемм
IEC 60034-12 EN 60034-12 Пусковые характеристики
IEC 60038 EN 60038 Напряжение
Механика
IEC EN Содержание
IEC 60072 Габаритные размеры
IEC 60034-5 EN 60034-5 Степень защиты
IEC 60034-6 EN 60034-6 Способы охлаждения
IEC 60034-7 EN 60034-7 Конструктивное исполнение
IEC 60034-9 EN 60034-9 Уровень шума
IEC 60034-14 EN 60034-14 Механическая вибрация
Электродвигатели соответствуют следующим международным стандартам:
NF C 51 Франция NBNC51-101 Бельгия
ÖVE M10 Австрия CEI 2-3, V1 Италия
SS 426 0101 Швеция NEK-IEC 34-1 Норвегия
SEV 3009 Швейцария BS 4999/5000 Великобритания
Конструкция
Корпусы электродвигателей изготовлены из чугуна или стали. Данная конструкция обеспечивает оптимальное
охлаждение и надлежащую самоочистку.
Степень защиты
Все электродвигатели в стандартном исполнении выполнены в соответствии со степенью защиты IP 55 согласно
стандарта IEC 60034-5.
Охлаждение
Все электродвигатели в стандартном исполнении выполнены в соответствии со способом охлаждения IC 410.
Покраска
Серийные двигатели покрыты лаковой краской RAL 2009 (оранжевый). Лаковое покрытие соответствует
исполнению для зоны «умеренного климата» согласно IEC-721-2-1, для установки в закрытых помещениях и на
открытом воздухе.
5. Общие сведения
+49 (0)40 / 853 771 – 0 info@hansa-motoren.de
HANSA-MOTOREN
3
Монтажные позиции
Электродвигатели поставляются в следующих монтажных позициях согласно IEC 60034-7:
IM B3 / V5 / V6 / B6 / B7 / B8 IM B5 / V1 / V3 IM B35 / V15 / V36
Изоляция
Все электродвигатели в стандартном исполнении выполнены в соответствии с классом изоляции „F“ согласно
стандарта EN 60034-1.
В таблице приведены данные повышения температуры (∆T*) и наиболее высокая температура обмотки (Tmax):
Класс изоляции ∆T* Tmax
B 80 K 125°C
F 105 K 155°C
H 125 K 180°C
Подшипники
Все электродвигатели оснащены высококачественными, не требующими регулярной смазки подшипниками
известных производителей. Номинальный срок службы подшипника при горизонтальном расположении
электродвигатели, при работе без дополнительных осевых нагрузок составляет минимум 40 000 часов. При
максимальной нагрузке минимальный срок службы составляет 20 000 часов.
Типоразмер подшипников
Габарит электродвигателя А-сторона / приводной конец вала В-сторона/ неприводной конец вала
112 6207.ZZ.C3 6207.ZZ.C3
132 6308.ZZ.C3 6308.ZZ.C3
160 6310.ZZ.C3 6310.ZZ.C3
180 6312.ZZ.C3 6312.ZZ.C3
200 6313.ZZ.C3 6313.ZZ.C3
225 6314.ZZ.C3 6314.ZZ.C3
250 6316.ZZ.C3 6316.ZZ.C3
280 6317.ZZ.C3 6317.ZZ.C3
315 6317.ZZ.C3 6317.ZZ.C3
Температура окружающей среды
Электродвигатели рассчитаны на работу при температуре окружающей среды от -35°C до +50°C.
6. Общие сведения
+49 (0)40 / 853 771 – 0 info@hansa-motoren.de
HANSA-MOTOREN
4
Номинальное напряжение
При 50 Hz : 230 / 400 В или 400 / 690 В (Вид соединения: ∆ «треугольник» / Y «звезда»)
Допуск : +/- 10%
Другие диапазоны напряжений доступны за дополнительную плату.
Схемы соединений
Подключение по схеме «треугольник» Подключение по схеме «звезда»