GPON Stick SFP ONT
•
1 like•388 views
SHFP-GUS-BP GPON stick SFP ONT is a new terminal mode for GPON solution, which is a variety of FTTB \ FTTH \FTTO accessing ONT published by SH for carrier-grade FTTH network applications. It can be plug into L2 Ethernet Switch SFP Slot to work as ONT or even MDU. SHFP-GUS-BP supports standard OMCI, can provide up to 1.25Gbps uplink and 2.5Gbps downlink high-speed transfer rate. It can fully meet carrier-grade FTTB\FTTH\FTTO equipment requirement. The ISP customer need not change the original FTTB Access Switch but just need SHFP-GUS-BP to replace the uplink SFP, so that the whole solution can be replace from Active Fiber Networks to GPON solution, which protect your former investment.
Report
Share
Report
Share
Download to read offline
Recommended
Sfp transceivers
https://www.cbo-it.de/de/produkte/blueoptics/transceiver/qsfp.html ....SFP stands for Small Form-factor Pluggable transceiver. It is a pluggable version of SFF. Companies like Agilent,
IBM, Lucent, Siemens, Infineon, AMP/Tyco, and others are utilizing SFP which is administered by MSA (Multisource
agreements.
Plc splitter
Our PLC Splitter is a completely passive optical branching device that exhibit uniform signal splitting for the most sophisticated optical networks. Contact us today. http://www.rollball.com.cn
What’s the Difference Between GPON and EPON
Leading Huawei networking products distributor - huanetwork.com
What’s the Difference Between GPON and EPON
SIEPON Alignment with Broadband Forum Requirements
Presentation from SIEPON Seminar on 20 April in Czech Republic, sponsored by IEEE-SA & CAG. Opinions presented by the speakers in this presentation are their own, and not necessarily those of their employers or of IEEE.
10GBase Copper SFP+ Module for HuaWei HP Cisco Finisar
This document provides specifications for the SHPP-10G-T 10Gb/s copper SFP+ transceiver from SH LINK CO., LIMITED. The transceiver operates at 10.3125 Gb/s over 30 meters of Cat6a/7 cable with an RJ45 connector. It has a temperature range of 0-70°C and is powered by a single 3.3V supply. The document includes detailed electrical and mechanical characteristics, pinouts, and serial ID contents stored in the transceiver's EEPROM.
Sfp products
Our industry standard SFP products is a hot swappable input or output device that plugs into a Gigabit Ethernet port or slot by linking the port with the fibre optic network.
Huawei ftth c b e2 e solution
The document discusses Huawei's FTTH/C/B E2E solution. It describes Huawei's OLT equipment that can be placed in the central office to reduce costs. Different OLT models are presented along with their specifications and pricing. The solution also includes a variety of ONT devices to meet different scenarios. It highlights benefits like high bandwidth, support for more users, and future compatibility. Maintenance advantages are discussed like fast fault identification and location.
Transceiver Options for Brocade 5100 Switch
Nowadays, many small and medium business and organizations such as local government, campus and some agencies etc., require fast and frequent access to database the files. A storage Area Network (SAN) with Fibre Channel (FC) switching technology (Figure 1) offers the speed and reliability for them. Brocade 5100 switch is an ideal Fibre Channel switch used for those organizations and can meet a variety of SAN environments.
Recommended
Sfp transceivers
https://www.cbo-it.de/de/produkte/blueoptics/transceiver/qsfp.html ....SFP stands for Small Form-factor Pluggable transceiver. It is a pluggable version of SFF. Companies like Agilent,
IBM, Lucent, Siemens, Infineon, AMP/Tyco, and others are utilizing SFP which is administered by MSA (Multisource
agreements.
Plc splitter
Our PLC Splitter is a completely passive optical branching device that exhibit uniform signal splitting for the most sophisticated optical networks. Contact us today. http://www.rollball.com.cn
What’s the Difference Between GPON and EPON
Leading Huawei networking products distributor - huanetwork.com
What’s the Difference Between GPON and EPON
SIEPON Alignment with Broadband Forum Requirements
Presentation from SIEPON Seminar on 20 April in Czech Republic, sponsored by IEEE-SA & CAG. Opinions presented by the speakers in this presentation are their own, and not necessarily those of their employers or of IEEE.
10GBase Copper SFP+ Module for HuaWei HP Cisco Finisar
This document provides specifications for the SHPP-10G-T 10Gb/s copper SFP+ transceiver from SH LINK CO., LIMITED. The transceiver operates at 10.3125 Gb/s over 30 meters of Cat6a/7 cable with an RJ45 connector. It has a temperature range of 0-70°C and is powered by a single 3.3V supply. The document includes detailed electrical and mechanical characteristics, pinouts, and serial ID contents stored in the transceiver's EEPROM.
Sfp products
Our industry standard SFP products is a hot swappable input or output device that plugs into a Gigabit Ethernet port or slot by linking the port with the fibre optic network.
Huawei ftth c b e2 e solution
The document discusses Huawei's FTTH/C/B E2E solution. It describes Huawei's OLT equipment that can be placed in the central office to reduce costs. Different OLT models are presented along with their specifications and pricing. The solution also includes a variety of ONT devices to meet different scenarios. It highlights benefits like high bandwidth, support for more users, and future compatibility. Maintenance advantages are discussed like fast fault identification and location.
Transceiver Options for Brocade 5100 Switch
Nowadays, many small and medium business and organizations such as local government, campus and some agencies etc., require fast and frequent access to database the files. A storage Area Network (SAN) with Fibre Channel (FC) switching technology (Figure 1) offers the speed and reliability for them. Brocade 5100 switch is an ideal Fibre Channel switch used for those organizations and can meet a variety of SAN environments.
25GbE Cabling vs 40GbE Cabling
This document compares 25GbE and 40GbE cabling. It notes that while 40GbE has been popular, 25GbE is gaining adoption in data centers as it provides greater port density and performance at a lower cost compared to 40GbE. Specifically, 25GbE uses fewer lanes than 40GbE, resulting in lower power consumption and cabling needs. The document concludes that 25GbE seems to be a preferred upgrade option over 40GbE.
3 Lan Kinerja Tinggi 1
The document discusses several high-speed networking technologies:
1. FDDI and CDDI, which provide data transmission speeds of 100 Mbps over fiber optic or copper cabling respectively using a dual-ring topology.
2. Fast Ethernet, which increased standard Ethernet's speed from 10 Mbps to 100 Mbps while maintaining the same packet format and interfaces.
3. Gigabit Ethernet, which further increased speeds to 1 Gbps using several physical layer variants over fiber optic or twisted pair cabling.
Fiberstore's 10 gigabit ethernet transceivers and cables faq
The pinouts of SFP and SFP+ connectors are identical. However, SFP has a maximum data rate of 5Gb/s whereas SFP+ is designed for 10Gb/s. The SFP receptacles and plugs are not as well impedance matched as SFP+ receptacles and plugs. Also SFP+ cable is designed for 10Gb/s whereas SFP cable may not be able to satisfactorily transmit that rate.
“EPoC”: The Art of Mixed Media
Presentation from SIEPON Seminar on 20 April in Czech Republic, sponsored by IEEE-SA & CAG. Opinions presented by the speakers in this presentation are their own, and not necessarily those of their employers or of IEEE.
Qsfp transceiver
Our QSFP transceiver is designed for utilization in 40 gigabit Ethernet links over any single mode fibre. Check out these products that we have to offer.
Gponfundamentals short
This document provides an overview and analysis of GPON (Gigabit-capable Passive Optical Network) standards and technologies. It describes the basic concepts of PON networks including network architecture, upstream and downstream data transmission principles, and frame structures. It also analyzes key GPON standards from standards bodies like ITU-T and compares GPON to EPON. The document aims to give the reader an understanding of GPON networks, standards, and technologies.
SFP Module
Roll Ball brings to you SFP module and transceivers to Gigabit Ethernet and fibre channel applications. Check out our website right now. Visit us at:-http://www.rollball.com.cn
Alcatel - 7750 SR & CGNAT SR-OS Fundamental
The document discusses Alcatel-Lucent's Service Router Operating System (SR-OS) and their High Leverage Network (HLN). It introduces the HLN as a converged, scalable, and intelligent IP network that offers distributed service intelligence, broadband access, scalable IP transport, and supports innovative revenue-generating services. The HLN focuses on application enablement, universal access, network evolution, and operational transformation. It also discusses the FP3 chip that enables 100Gbps networking and the services supported on the HLN network.
GPON-Doctor TR-156 Monitoring Features
TR-156 Monitoring features provides a complete, fast and reliable tool for GPON diagnosis. It describes network architectures and deployment scenarios for Ethernet-based GPON aggregation networks including:
- Fiber To The Home (FTTH), Fiber Into The Home (FITH), and Fiber To The Office (FTTO) deployments.
- Traffic control facilities in ONUs for upstream and downstream traffic including GEM ports, T-CONTs, and priority control.
- Residential N:1 VLAN tagging where traffic is single-tagged with an S-Tag throughout the aggregation network.
- An example residential N:1 VLAN configuration translating between C-VLAN and S-VLAN
Shubham ppt on ospf and framerelay
This document discusses networking techniques including Frame Relay and OSPF. It begins with an introduction to Frame Relay, describing its components and operation at the data link layer. It then explains OSPF, including its use of the Dijkstra algorithm for routing, key terms like links and routers, and how it is configured on Cisco devices. The presentation provides an overview of these common wide area network protocols.
Huawei GPON Fundamentals
This document provides an overview of GPON (Gigabit-capable Passive Optical Network) technology. It discusses the basic concepts and working principles of PON networks, comparing GPON to other PON standards like EPON. The document also analyzes key GPON standards and specifications, describes the GPON network model reference, and reviews basic GPON performance parameters and network protection modes.
Alcatel Lucent Gpon Technology Training 2
This document provides an overview of Alcatel-Lucent's 7360 ISAM FX fiber access platform, including its shelf types, board types, and line cards. The 7360 ISAM FX offers various shelf configurations (FX-16, FX-8, FX-4) that can accommodate different mixtures of fiber line cards. It supports both GPON and EPON fiber technologies as well as point-to-point Ethernet services. The document describes the control and line cards available, including high-capacity GPON and 10G PON options. It positions the 7360 ISAM FX as a flexible fiber access platform for residential, business, and mobile backhaul services.
EPON Technology and its Application in China Telecomʹs Access Network Migration
EPON Technology and its Application in China Telecomʹs Access Network MigrationIEEE Standards Association (IEEE SA)
China Telecom has been migrating from ADSL to fiber technologies like EPON and GPON to meet increasing broadband subscriber and bandwidth demands, piloting EPON in 2005 and making it a core access technology due to its maturity and interoperability. They aim to accelerate FTTH deployment through projects like "Broadband China, Optical City" to reach 100 million FTTH homes by 2015 using EPON and GPON, while also starting rollout of 10G-EPON to improve bandwidth for multi-dwelling units.What is a transceiver ii
The document discusses different types of fiber optic transceiver modules used for high-speed networking, including SFP+, SFP, XFP, and X2 modules. It provides definitions of each module, their advantages and disadvantages compared to other form factors, common specifications and standards they support, troubleshooting tips, and examples of error messages that may occur when using them.
Dsl physical layer
1. DSL refers to digital subscriber line technologies that provide internet access over telephone lines, including ADSL, HDSL, and VDSL.
2. DSL uses discrete multi-tone modulation to transmit data across multiple frequencies over copper telephone lines. Each frequency band carries a discrete amount of data.
3. DSL technologies have continued to evolve, with newer versions like ADSL2+ and VDSL2 providing higher download speeds by using more frequency bands and increasing data rates per band.
EoC Pro-eng
The document provides specifications for the ECM Ethernet Customer Modem and the EMM Ethernet Master Modem, which are products in Teleste's Ethernet to the Home (ETTH) platform. The ECM provides a symmetrical 100 Mbps data connection to end users through existing coaxial wall outlets, while the EMM supports up to 32 ECMs (or 16 with VLAN tagging) and connects to virtual fiber or other Ethernet data sources. Both devices utilize an ingress-tolerant OFDM modulation over a 3-34 MHz frequency band to deliver high-speed connectivity over existing coaxial infrastructure without replacing equipment.
Sfp+ transceiver products
https://www.cbo-it.de/de/produkte/blueoptics/transceiver/sfpplus.html
A SFP+ Duplex Transceiver is a combination of transmitter and receiver for the transfer of optical signals. The SFP+
Duplex Transceiver uses an electronic to optical converter to translate the signals within the SFP+ Duplex Transceiver.
PONs overview
The document discusses different types of passive optical networks (PONs) including BPON/APON, EPON, and GPON. It describes the key components of a PON including the optical line terminal (OLT) located at the central office which provides the interface to the backbone network, and optical network units (ONUs) or optical network terminals (ONTs) located at the customer premises. It also discusses the optical distribution network (ODN) which connects the OLT to the ONUs/ONTs using passive splitters, and some advantages and disadvantages of PON architectures.
Understanding olt, onu, ont and odn full
1. The optical distribution network (ODN) must be carefully planned to ensure clients receive a usable optical signal over the desired coverage area.
2. Splitting ratio and level choices such as 1x32 or 1x64 affect how many clients can be supported per PON port and the optical power budget.
3. Distance between the OLT and furthest ONT must be considered - maximum reach is typically 20-25km depending on splitting used to stay within power and loss budgets.
CCNA CHAPTER 11 BY jetarvind kumar madhukar
This document discusses Frame Relay components, configuration, and troubleshooting. It describes Frame Relay features, components like DTE, DCE, CIR, and DLCI addressing. It covers virtual circuits, encapsulation types, and LMI configuration. It also provides examples of show commands for verification and troubleshooting Frame Relay networks.
SFP Optical Transceiver
Our SFP optical transceivers are interchangeable, portable media connectors and allow a single network device to connect a wide range of fiber.
SFP Optical Transceiver
Our SFP optical transceivers are interchangeable, portable media connectors and allow a single network device to connect a wide range of fiber.
More Related Content
What's hot
25GbE Cabling vs 40GbE Cabling
This document compares 25GbE and 40GbE cabling. It notes that while 40GbE has been popular, 25GbE is gaining adoption in data centers as it provides greater port density and performance at a lower cost compared to 40GbE. Specifically, 25GbE uses fewer lanes than 40GbE, resulting in lower power consumption and cabling needs. The document concludes that 25GbE seems to be a preferred upgrade option over 40GbE.
3 Lan Kinerja Tinggi 1
The document discusses several high-speed networking technologies:
1. FDDI and CDDI, which provide data transmission speeds of 100 Mbps over fiber optic or copper cabling respectively using a dual-ring topology.
2. Fast Ethernet, which increased standard Ethernet's speed from 10 Mbps to 100 Mbps while maintaining the same packet format and interfaces.
3. Gigabit Ethernet, which further increased speeds to 1 Gbps using several physical layer variants over fiber optic or twisted pair cabling.
Fiberstore's 10 gigabit ethernet transceivers and cables faq
The pinouts of SFP and SFP+ connectors are identical. However, SFP has a maximum data rate of 5Gb/s whereas SFP+ is designed for 10Gb/s. The SFP receptacles and plugs are not as well impedance matched as SFP+ receptacles and plugs. Also SFP+ cable is designed for 10Gb/s whereas SFP cable may not be able to satisfactorily transmit that rate.
“EPoC”: The Art of Mixed Media
Presentation from SIEPON Seminar on 20 April in Czech Republic, sponsored by IEEE-SA & CAG. Opinions presented by the speakers in this presentation are their own, and not necessarily those of their employers or of IEEE.
Qsfp transceiver
Our QSFP transceiver is designed for utilization in 40 gigabit Ethernet links over any single mode fibre. Check out these products that we have to offer.
Gponfundamentals short
This document provides an overview and analysis of GPON (Gigabit-capable Passive Optical Network) standards and technologies. It describes the basic concepts of PON networks including network architecture, upstream and downstream data transmission principles, and frame structures. It also analyzes key GPON standards from standards bodies like ITU-T and compares GPON to EPON. The document aims to give the reader an understanding of GPON networks, standards, and technologies.
SFP Module
Roll Ball brings to you SFP module and transceivers to Gigabit Ethernet and fibre channel applications. Check out our website right now. Visit us at:-http://www.rollball.com.cn
Alcatel - 7750 SR & CGNAT SR-OS Fundamental
The document discusses Alcatel-Lucent's Service Router Operating System (SR-OS) and their High Leverage Network (HLN). It introduces the HLN as a converged, scalable, and intelligent IP network that offers distributed service intelligence, broadband access, scalable IP transport, and supports innovative revenue-generating services. The HLN focuses on application enablement, universal access, network evolution, and operational transformation. It also discusses the FP3 chip that enables 100Gbps networking and the services supported on the HLN network.
GPON-Doctor TR-156 Monitoring Features
TR-156 Monitoring features provides a complete, fast and reliable tool for GPON diagnosis. It describes network architectures and deployment scenarios for Ethernet-based GPON aggregation networks including:
- Fiber To The Home (FTTH), Fiber Into The Home (FITH), and Fiber To The Office (FTTO) deployments.
- Traffic control facilities in ONUs for upstream and downstream traffic including GEM ports, T-CONTs, and priority control.
- Residential N:1 VLAN tagging where traffic is single-tagged with an S-Tag throughout the aggregation network.
- An example residential N:1 VLAN configuration translating between C-VLAN and S-VLAN
Shubham ppt on ospf and framerelay
This document discusses networking techniques including Frame Relay and OSPF. It begins with an introduction to Frame Relay, describing its components and operation at the data link layer. It then explains OSPF, including its use of the Dijkstra algorithm for routing, key terms like links and routers, and how it is configured on Cisco devices. The presentation provides an overview of these common wide area network protocols.
Huawei GPON Fundamentals
This document provides an overview of GPON (Gigabit-capable Passive Optical Network) technology. It discusses the basic concepts and working principles of PON networks, comparing GPON to other PON standards like EPON. The document also analyzes key GPON standards and specifications, describes the GPON network model reference, and reviews basic GPON performance parameters and network protection modes.
Alcatel Lucent Gpon Technology Training 2
This document provides an overview of Alcatel-Lucent's 7360 ISAM FX fiber access platform, including its shelf types, board types, and line cards. The 7360 ISAM FX offers various shelf configurations (FX-16, FX-8, FX-4) that can accommodate different mixtures of fiber line cards. It supports both GPON and EPON fiber technologies as well as point-to-point Ethernet services. The document describes the control and line cards available, including high-capacity GPON and 10G PON options. It positions the 7360 ISAM FX as a flexible fiber access platform for residential, business, and mobile backhaul services.
EPON Technology and its Application in China Telecomʹs Access Network Migration
EPON Technology and its Application in China Telecomʹs Access Network MigrationIEEE Standards Association (IEEE SA)
China Telecom has been migrating from ADSL to fiber technologies like EPON and GPON to meet increasing broadband subscriber and bandwidth demands, piloting EPON in 2005 and making it a core access technology due to its maturity and interoperability. They aim to accelerate FTTH deployment through projects like "Broadband China, Optical City" to reach 100 million FTTH homes by 2015 using EPON and GPON, while also starting rollout of 10G-EPON to improve bandwidth for multi-dwelling units.What is a transceiver ii
The document discusses different types of fiber optic transceiver modules used for high-speed networking, including SFP+, SFP, XFP, and X2 modules. It provides definitions of each module, their advantages and disadvantages compared to other form factors, common specifications and standards they support, troubleshooting tips, and examples of error messages that may occur when using them.
Dsl physical layer
1. DSL refers to digital subscriber line technologies that provide internet access over telephone lines, including ADSL, HDSL, and VDSL.
2. DSL uses discrete multi-tone modulation to transmit data across multiple frequencies over copper telephone lines. Each frequency band carries a discrete amount of data.
3. DSL technologies have continued to evolve, with newer versions like ADSL2+ and VDSL2 providing higher download speeds by using more frequency bands and increasing data rates per band.
EoC Pro-eng
The document provides specifications for the ECM Ethernet Customer Modem and the EMM Ethernet Master Modem, which are products in Teleste's Ethernet to the Home (ETTH) platform. The ECM provides a symmetrical 100 Mbps data connection to end users through existing coaxial wall outlets, while the EMM supports up to 32 ECMs (or 16 with VLAN tagging) and connects to virtual fiber or other Ethernet data sources. Both devices utilize an ingress-tolerant OFDM modulation over a 3-34 MHz frequency band to deliver high-speed connectivity over existing coaxial infrastructure without replacing equipment.
Sfp+ transceiver products
https://www.cbo-it.de/de/produkte/blueoptics/transceiver/sfpplus.html
A SFP+ Duplex Transceiver is a combination of transmitter and receiver for the transfer of optical signals. The SFP+
Duplex Transceiver uses an electronic to optical converter to translate the signals within the SFP+ Duplex Transceiver.
PONs overview
The document discusses different types of passive optical networks (PONs) including BPON/APON, EPON, and GPON. It describes the key components of a PON including the optical line terminal (OLT) located at the central office which provides the interface to the backbone network, and optical network units (ONUs) or optical network terminals (ONTs) located at the customer premises. It also discusses the optical distribution network (ODN) which connects the OLT to the ONUs/ONTs using passive splitters, and some advantages and disadvantages of PON architectures.
Understanding olt, onu, ont and odn full
1. The optical distribution network (ODN) must be carefully planned to ensure clients receive a usable optical signal over the desired coverage area.
2. Splitting ratio and level choices such as 1x32 or 1x64 affect how many clients can be supported per PON port and the optical power budget.
3. Distance between the OLT and furthest ONT must be considered - maximum reach is typically 20-25km depending on splitting used to stay within power and loss budgets.
CCNA CHAPTER 11 BY jetarvind kumar madhukar
This document discusses Frame Relay components, configuration, and troubleshooting. It describes Frame Relay features, components like DTE, DCE, CIR, and DLCI addressing. It covers virtual circuits, encapsulation types, and LMI configuration. It also provides examples of show commands for verification and troubleshooting Frame Relay networks.
What's hot (20)
Fiberstore's 10 gigabit ethernet transceivers and cables faq
Fiberstore's 10 gigabit ethernet transceivers and cables faq
EPON Technology and its Application in China Telecomʹs Access Network Migration
EPON Technology and its Application in China Telecomʹs Access Network Migration
Similar to GPON Stick SFP ONT
SFP Optical Transceiver
Our SFP optical transceivers are interchangeable, portable media connectors and allow a single network device to connect a wide range of fiber.
SFP Optical Transceiver
Our SFP optical transceivers are interchangeable, portable media connectors and allow a single network device to connect a wide range of fiber.
Qsfp transceiver
Our QSFP transceiver is designed for utilization in 40 gigabit Ethernet links over any single mode fibre. Check out these products that we have to offer.
Difference Between XFP & SFP
XFP and SFP are both transceiver standards for fiber optic networking. XFP was defined in 2002 for 10 Gigabit connections and uses an LC connector. It is hot-swappable and supports applications like 10 Gigabit Ethernet and OC-192 SONET. SFP was developed for smaller form factor pluggable transceivers up to 5 Gbps for easy upgrading of networks. It supports standards like Gigabit Ethernet, Fibre Channel, and SONET. Due to its smaller size, SFP replaced the GBIC transceiver standard.
Sfp optical transceiver
Our SFP optical transceivers are interchangeable, portable media connectors and allow a single network device to connect a wide range of fiber. http://www.rollball.com.cn/
FTTx - GPON technology.pdf
GPON FTTx cabling designs and solutions were presented. Key components of structured cabling systems and FTTx cabling were discussed including fiber splitters and active equipment. An introduction to GPON FTTx cabling was provided along with network topologies. Traditional LAN cabling was compared to GPON FTTx cabling architectures.
Why Choose GPON as Your FTTH Solution?
The most common passive optical network (PON) standards in current use are Ethernet passive optical network (EPON) and gigabit passive optical network (GPON). GPON is the most widely deployed optical system in today's fiber-to-the-home (FTTH) networks. Why choose GPON?
Fiber optic connector
The fiber optic connectors we offer are male connectors with a protruding ferrule that holds the fibers and align fibers for mating. Check it out today.
Sfp transceiver
The document discusses Roll Ball's fiber optic connectors, SFP modules, and SFP transceivers for connecting to fiber optic networks. It provides details on their male connectors, SFP products for Gigabit Ethernet and fiber channel applications, and an SFP transceiver that connects different fiber types to electrical switch ports. Contact information and the company website are listed for more information.
Fiber optic connector
The fiber optic connectors we offer are made connectors with a protruding ferrule that holds the fibers and align fibers for mating. Check it out today. http://www.rollball.com.cn/
A Comprehensive Understanding of SFP Optical Transceiver
SFP optical transceiver is still being used as an industry standard by worldwide manufacturers and providers today. It has been an industry workhorse for over 20 years in many networks such as PON, WDM, Fibre Channel, SONET, and other communications standards. This paper will give you a comprehensive understanding of SFP optical transceivers.
Fiber Patch Cable Solutions for Transceiver Ports Interconnection
Fiber optic jumper cables are designed to interconnect or cross connect fiber networks within structured cabling systems. They are commonly used in data centers to interconnect ports and transceivers that accept LC and MPO/MTP fiber optic connectors. There are a full range of cost-effective fiber optic patch cable solutions which can meet your demands now and for your upgrades in the future. In this post, we will demonstrate the high-speed fiber patch cable solutions for 10G, 40G, and 100G Ethernet transceiver ports interconnection.
What is gpon
GPON (Gigabit Passive Optical Network) is a fiber optic technology that brings optical fiber closer to homes and businesses to deliver high bandwidth internet access. It uses a point-to-multipoint architecture with passive splitters to deliver fiber connectivity in a cost-effective manner. GPON supports high speeds, legacy services, and new services like IPTV through efficient encapsulation methods. It consists of an optical line terminal at the provider and multiple optical network terminals connected through a passive optical distribution network.
cisco-mgblh1-datasheet.pdf
The MGBLH1 is an SFP transceiver that operates at 1310nm wavelength for single-mode fiber networks. It supports data rates up to 1000Mbps over distances of up to 40km. The transceiver has an LC duplex connector and operates in the temperature range of 0 to 70°C. For more information or purchase, contact info@hi-network.com.
cisco-glc-fe-100fx-datasheet.pdf
The GLC-FE-100FX is a hot-swappable SFP module that connects Fast Ethernet ports to ordinary multimode fiber-optic links up to 2km long, operating at 100Mbps. It has a single 100BASE-FX port using an LC duplex connector for 1310nm multi-mode fiber. The module identifies as a Cisco-qualified SFP and complies with Small Form-factor Pluggable specifications.
cisco-sfp-10g-er-s=-datasheet.pdf
The SFP-10G-ER-S= is a single-mode fiber transceiver that supports 10 Gigabit Ethernet connectivity over distances of up to 40 kilometers, making it ideal for long-range network applications. It is designed for use with compatible Huawei switches and routers to provide 10 Gbps data rates over 1550 nm wavelength single-mode fiber. The product information and specifications are provided, along with contact details for Hi-Network to purchase or get additional support for the SFP-10G-ER-S= transceiver module.
Gpon Fundamentals
The document discusses key concepts and technologies of GPON (Gigabit-capable Passive Optical Networks), including:
1) The basic architecture of PON networks consisting of an OLT, ONUs, and a passive optical splitter.
2) Reasons for adopting the GPON standard such as supporting high-bandwidth transmission and long reach.
3) Key GPON technologies including ranging, equalization delay, dynamic bandwidth assignment (DBA), and wavelength division multiplexing (WDM) for upstream/downstream transmission.
Gpon Fundamentals
This document provides an overview of GPON (Gigabit-capable Passive Optical Networks) technology. It describes the basic concepts and architecture of PON networks, including how they use passive splitters and wavelength division multiplexing. GPON is introduced as the choice for carriers due to its ability to support high-bandwidth, long-reach transmission over fiber for triple-play services. The document then covers GPON principles such as downstream broadcast and upstream TDMA transmission, as well as standards, performance parameters, and network protection modes.
Active fiber components - tranceivers, media converters
All types of fiber optic transceivers:
Wide range of SFP, SFP+, XFP, QSFP+, X2, XENPAK, DAC, AOC, CWDM modules.
Fiber to coper media convertes:
10/100, 10/100/1000, 10G, 40G media converters.
Video converters: fiber to coax video converters with data and ethernet ports.
www.sominetworks.lt
www.sominetworks.com
cisco-glc-zx-sm-datasheet.pdf
The GLC-ZX-SM SFP module operates on standard single-mode fiber optic links up to approximately 70 km in length, providing an optical link budget of 21 dB. When the fiber span loss is less than 8 dB, a 10-dB inline optical attenuator should be inserted to avoid overloading the receiver. The SFP module connects using LC connectors, transfers data at 1.25 Gbps using 1000BASE-ZX standard over 1550 nm wavelength single-mode fiber, and is compatible with Cisco systems.
Similar to GPON Stick SFP ONT (20)
A Comprehensive Understanding of SFP Optical Transceiver
A Comprehensive Understanding of SFP Optical Transceiver
Fiber Patch Cable Solutions for Transceiver Ports Interconnection
Fiber Patch Cable Solutions for Transceiver Ports Interconnection
Active fiber components - tranceivers, media converters
Active fiber components - tranceivers, media converters
More from Allen He
10G Copper SFP, 10G SFP-T
SFP+ 10G-Base-T Transceiver Hot Pluggable, Cat-6a/7 Cable, 30m, +3.3V
SHPP-10G-T copper transceiver module is a high performance integrated duplex data link for bi-directional
communication over copper cable. It is specifically designed for high speed communication links that require 10
Gigabit Ethernet over Cat 6a/7 cable. This is the first SFP+ transceiver that offers 10 Gb/s communication over
this type of media.
40Gb/s Bidi QSFP+ Transceiver Hot Pluggable, Duplex LC, +3.3V, 850/900nm, 100...
SHQP-40G-SR-BD is a Four-Channel QSFP+ package optical transceiver for 40 Gigabit Ethernet Applications. It
multiplexes internally an XLPPI 4x10G interface into two 20Gb/s electrical channels, transmitting and receiving data at
850 and 900nm wavelength, up to the distance of 100m on OM3 / 150m on OM4. It is a high performance module for
short-range duplex data communication and interconnection applications.
Features:
Four lane aggregated bandwidth up to 40Gbps
10.3125 Gbps per electrical channel with 64b/66b encoded data
Hot-pluggable
Duplex LC
100m on OM3 / 150m on OM4
Compliant with QSFP+ SFF-8436 Specification
Compliant with QSFP MSA
Compliant witch 40GbE XLPPI electrical specification per IEEE 802.3ba-2010
Built-in digital diagnostic functions
Power Supply :+3.3V
Power consumption: <3.5W
Temperature Range: 0~ 70°C
RoHS Compliant
Applications:
40GBASE Ethernet
Fiber channel
Data center
Single-Mode100GBASE-LR4 QSFP28 Transceiver RoHS6 Compliant
Features:
Supports 103Gbps
Single 3.3V Power Supply and Power dissipation ≤ 3.5W
Up to 10km over SMF
RoHS-6 compliant (lead-free)
Commercial case temperature range of 0°C to 70°C
Four 25Gbps DML LAN-WDM channels on transmitter side
PIN and TIA array on the receiver side
4x25G electrical interface
Duplex LC receptacles
I2C interface with integrated Digital Diagnostic Monitoring
Applications:
100GBASE-LR4 100G Ethernet
10Gb/s Tunable SFP+ Transceiver Hot Pluggable, Duplex LC, +3.3V, 100GHz, Mono...
SHPP-10G-Tun tunable SFP+ Optical Transceiver provides a high-speed serial link at 9.95 to 11.3 Gbps data rates. It
complies with SFP+ Multi-Source Agreement (MSA) Specification. It provides Digital diagnostics functions via a 2-wire serial
interface as specified in SFF-8472. It fulfills the tunable via the monolithically Mach-Zehnder Modulators (MZM) laser. It support optical link up to 80km for SONET/SDH, 10G FC and Ethernet applications.
10Gb/s DWDM XFP Transceiver Hot Pluggable, Duplex LC, +3.3V & +5V, 100GHz ITU...
This document provides specifications for a 10Gb/s DWDM XFP transceiver module that operates at wavelengths across the C band from 1528.77nm to 1561.42nm over single mode fiber links up to 80km. It uses EML laser transmitters and APD photodetectors, supports data rates of 9.95-11.3Gb/s, and complies with the XFP MSA specification including digital diagnostics via a 2-wire interface.
10Gb/s DWDM XFP Transceiver Hot Pluggable, Duplex LC, +3.3V & +5V, 100GHz ITU...
10Gb/s DWDM XFP Transceiver
Hot Pluggable, Duplex LC, +3.3V & +5V, 100GHz ITU Grid C Band, EML/PIN
Single mode, 40km, 0~70°C
10Gb/s 80km DWDM SFP+ Transceiver Hot Pluggable, Duplex LC, +3.3V, 100GHz ITU...
The document is a datasheet for a 10Gb/s DWDM SFP+ transceiver module that operates at wavelengths between 1528.77nm and 1561.42nm. It supports data rates up to 10Gb/s over single mode fiber links up to 80km. The module uses an EML transmitter and APD photo-detector and complies with common 10Gb/s Ethernet and telecom standards. It has a duplex LC connector and digital diagnostics monitoring via a 2-wire interface.
10Gb/s DWDM SFP+ Transceiver Hot Pluggable, Duplex LC, +3.3V, 100GHz ITU Grid...
SHPP-10G-Dxx-40 is a very compact 10Gb/s DWDM optical transceiver module for serial optical communication
applications at 10Gb/s, inter-converting the 10Gb/s serial electrical data stream with the 10Gb/s optical signal. It complies
with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-ER. It provides Digital diagnostics functions via a 2-wire serial
interface as specified in SFF-8472. It features hot plug, easy upgrading and low EMI emission. The high-performance
DWDM EML transmitter and high-sensitivity PIN receiver provide superior performance for Ethernet applications up to link length of 40km on single mode fiber.
More from Allen He (8)
40Gb/s Bidi QSFP+ Transceiver Hot Pluggable, Duplex LC, +3.3V, 850/900nm, 100...
40Gb/s Bidi QSFP+ Transceiver Hot Pluggable, Duplex LC, +3.3V, 850/900nm, 100...
Single-Mode100GBASE-LR4 QSFP28 Transceiver RoHS6 Compliant
Single-Mode100GBASE-LR4 QSFP28 Transceiver RoHS6 Compliant
10Gb/s Tunable SFP+ Transceiver Hot Pluggable, Duplex LC, +3.3V, 100GHz, Mono...
10Gb/s Tunable SFP+ Transceiver Hot Pluggable, Duplex LC, +3.3V, 100GHz, Mono...
10Gb/s DWDM XFP Transceiver Hot Pluggable, Duplex LC, +3.3V & +5V, 100GHz ITU...
10Gb/s DWDM XFP Transceiver Hot Pluggable, Duplex LC, +3.3V & +5V, 100GHz ITU...
10Gb/s DWDM XFP Transceiver Hot Pluggable, Duplex LC, +3.3V & +5V, 100GHz ITU...
10Gb/s DWDM XFP Transceiver Hot Pluggable, Duplex LC, +3.3V & +5V, 100GHz ITU...
10Gb/s 80km DWDM SFP+ Transceiver Hot Pluggable, Duplex LC, +3.3V, 100GHz ITU...
10Gb/s 80km DWDM SFP+ Transceiver Hot Pluggable, Duplex LC, +3.3V, 100GHz ITU...
10Gb/s DWDM SFP+ Transceiver Hot Pluggable, Duplex LC, +3.3V, 100GHz ITU Grid...
10Gb/s DWDM SFP+ Transceiver Hot Pluggable, Duplex LC, +3.3V, 100GHz ITU Grid...
Recently uploaded
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
Climate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Video Streaming: Then, Now, and in the Future
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Microsoft - Power Platform_G.Aspiotis.pdf
Revolutionizing Application Development
with AI-powered low-code, presentation by George Aspiotis, Sr. Partner Development Manager, Microsoft
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Recently uploaded (20)
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
GPON Stick SFP ONT
- 1. Optical Transceiver Datasheet SH LINKCO.,LTD Website: www.buysfp.com Email: allen@shlinkco.com Add.: F6,Yunfa Building, No.4 Meicun Road, Shangmeilin, Futian District, Shenzhen, 518000 China Tel: +86 755 82891446 Fax: +86 755 82891849 1 SHFP-GUS-BP GPON Stick 1GE SFP ONT Description: 1. SHFP-GUS-BP GPON stick SFP ONT is a new terminal mode for GPON solution, which is a variety of FTTB FTTH FTTO accessing ONT published by SH for carrier-grade FTTH network applications. It can be plug into L2 Ethernet Switch SFP Slot to work as ONT or even MDU. SHFP-GUS-BP supports standard OMCI, can provide up to 1.25Gbps uplink and 2.5Gbps downlink high-speed transfer rate. It can fully meet carrier-grade FTTBFTTHFTTO equipment requirement. The ISP customer need not change the original FTTB Access Switch but just need SHFP-GUS-BP to replace the uplink SFP, so that the whole solution can be replace from Active Fiber Networks to GPON solution, which protect your former investment. Specifications: 1GPON uplink port SFU Module design ONU/MDU uplink
- 2. Optical Transceiver Datasheet SH LINKCO.,LTD Website: www.buysfp.com Email: allen@shlinkco.com Add.: F6,Yunfa Building, No.4 Meicun Road, Shangmeilin, Futian District, Shenzhen, 518000 China Tel: +86 755 82891446 Fax: +86 755 82891849 2 Applications: Performance: Attributes SHFP-GUS-BP Outline Dimensions (mm) (W*D*H) 18mm*35mm*75.5 mm Weight ≤0.2kg Environmental Requirements Working temperature：-10ºC~85ºC Storage temperature：-40ºC~70ºC Working humidity：5%~90% Storage temperature：5%~95% no condensing Ethernet Standard IEEE802.3 IEEE802.3au IEEE802.3x Interface 1 10/100/1000BASE-T RJ45 Auto negotiation Auto MDI/MDIX GPON Speed Downlink： 2.488Gbps Uplink： 1.244Gbps Connector SC/APC, pigtail Power level ITU-T G.984.2 , Class B+ Power level Downlink – Wavelength： 1490nm – Sensitivity： -28dBm – Saturation： -8dBm Uplink – Wavelength： 1310nm – TX power： 0.5 ~ 5dBm Fiber G.652 Single Mode Fiber