Czwarte wydanie magazynu GLOBAL poświęcone zostało właściwemu zabezpieczeniu obiektów przemysłowych oraz obiektów wysokiego ryzyka, które w szczególny sposób narażone są na ataki terrorystyczne. W numerze znalazły się również informacje dotyczące drzwi bezpieczeństwa produkowanych przez Gunnebo.

1. #4
Security Matters
ATM SAFES
Smash & grab:
the ATM attack cycle
VISUAL GUIDE
The inside track on
petrol station security
FAQS: SECURITY DOORS
Ballistic and blast resistance
– your questions answered
Risk Levels
Intensify
How should
vulnerable sites
approach security?

2. SMARTER SECURITY IS ...

3. CONTENTS
8–9
A Quick Guide to
Seveso Sites
The lowdown on the
Seveso Directive which
has been helping to
prevent severe industrial
accidents in Europe for
over 30 years
4–7 The Changing Face of High-Risk Sites
Inside Security:
The Petrol Station10–11
In this edition, Global talks to experts about
the evolving threat faced by public areas
and critical infrastructure sites. “Many more
types of site are seen as potential terrorist
targets and are therefore vulnerable,” says
French security specialist, Jean-Charles
Proskuryn. Global asks what approach
should be taken.
16–17
FAQs: Ballistic and
Blast Resistant Doors
Standards, testing procedures and
more – your questions answered
Assessing threat levels is
critical to addressing security
for a growing number of
high-risk sites.
From front to back office, the petrol
station’s approach to security
French business develop-
ment manager with nearly
two decades of experience
in the security industry.
Chair of several committees
responsible for setting
industry standards for safes.
JEAN-CHARLES PROSKURYN
PIETER DE VLAAM
MEET THE EXPERTS
12–15
How ATM safes
have had to
adapt over time
to combat new
threats
Smash and Grab:
ATMs Under
Attack

4. 4 GLOBAL #4
What type of sites have
been traditionally classified
as high-risk?
“Firstly, sites which contain something of high value
which is at obvious risk from theft or industrial es-
pionage, such as a luxury jewellers or a research and
development centre.”
“And secondly, sites which store or process dangerous
substances. These are known as ‘Seveso sites’and are
considered high-risk since an accident at one of these
locations can have potentially severe consequences
on the surrounding area. There are 10,000 such sites
across the European Union, mainly in the chemical,
petrochemical, logistics and metal refining sectors –
and they are highly regulated.”
How has this changed?
“Today many more types of site are seen as potential
terrorist targets and are therefore vulnerable.
“These can also be split into two groups: critical infra-
structure – such as a power station, water treatment
plant or data centre – and public areas where there
are lots of people – such as a sports stadium, railway
station, airport, department store or school.”
The Changing Face of
High-Risk Sites
The evolution of the threats posed by terrorism has meant that sites not previously
considered vulnerable are now in need of far higher levels of security.
Global met with Jean-Charles Proskuryn, an expert in high-risk site protection based
in Paris, France and asked about the security challenges a larger number of sites are
having to tackle today.
Rob Suddaby
JEAN-CHARLES PROSKURYN
REACH ME AT jean-charles.proskuryn@gunnebo.com
Jean-Charles is based in France and has been active in
the security industry for nearly 20 years. Originally an
electronic security expert, he is now in charge of Business
Development and Gunnebo’s market strategy for the
Industry, Transport and Government sectors in France.

5. GLOBAL#4 5
Conduct a security
audit or risk assessment
– every site is different and you
should define the level and type
of security to fit your site
Invest in security which will
ensure operational continuity
– business-critical processes need to re-
main functional in the event of an attack
Adopt a system which
is able to evolve
– it will allow you to integrate new technology,
grow the scale of your system when required,
and maximise the potential for connectivity
To get the most out of your secu-
rity systems, make sure they are
fully integrated with one another
– it will improve performance and help you
identify potential threats more quickly
Take advantage of
the Internet of Things
– data gathered by smart security
systems can be used to provide
valuable insights into your business
Make security an integrated
part of your business
– incorporate it into your day-to-day
operational processes
Remember that you however
strong your security, you
cannot prevent an attack
– but you can slow it down
Train staff to be vigilant
– they can be taught to recognise
potential threats and act as an
early-warning system
8 SECURITY TIPS FOR HIGH-RISK SITES
LOW HIGH
MEDIUM
1
3
5
7
2
4
6
8

6. GLOBAL #46
How do you assess the
risk of a site and therefore
the required security?
“The security approach a site should take is
determined by a number of core factors:
“Using this basic information as a starting point,
a risk assessment should identify all the relevant
threats, hazards and vulnerabilities. This is an essen-
tial first step towards creating an overall protection
plan for a site.”
Do different types of site
need to take different
approaches to security?
“If we start with critical infrastructure, these sites
are already security-savvy. A site like a power plant or
a data centre will often look at security as a series of
layers or zones. They start with the perimeter walls
– the fencing, gates and CCTV – and move inwards.
The next layer is controlling access to the building
itself and then, once inside, to the various areas of
the site.”
So how should public sites
address security?
“We’re talking about sites where there are large
numbers of visitors moving around and which have
to allow access to the general public, like a shopping
centre or a metro station. Here the starting point is
always the flow of people. A shopping centre does
not want to prevent people from coming and going
nor does it want security which makes the site look
unwelcoming – the retail business depends on foot-
fall. Here more discreet surveillance and monitoring
systems are essential, as well as the vigilance of on-
site security staff.
“At a metro station, ticket gates provide an obvious
level of security, but again without disrupting the re-
quired flow of people. Passengers need to have their
tickets validated but without causing a jam. The flow
of people dictates how strict the security is. Dual
authentication, typical for access control within a
building such as a data centre, is not a viable option
for a metro station, for example. Maybe in the future
biometrics could be incorporated here for an extra
level of security in much the same way we are seeing
it used in airports.”
What is...?
Zonal Security
Starting outside and moving inwards, zoning is designed to
reduce the risk of unwanted events by allowing access to
specific areas of a site to those with who have a legitimate
reason to be there and preventing access to all other groups.
These zones, or layers, incorporate perimeter protection,
monitoring and intrusion systems, access and entrance
control, and physical protection which all contribute to the
overall security of a site by either deterring, detecting or
delaying an attack.
i) The type of activity carried out on that site
ii) The surrounding area
iii) The movement of people to, from and around
the site
iv) The reaction times of local emergency services
v) The potential impact an accident or attack
would have on the business, both in terms
of its activities and its reputation

7. 7
The view from around the world
Mikael Sundebäck, Nordic market security specialist, Sweden
“Fear is the fuel which drives terrorism. Previously it was easier to identify which types
of sites or which people were at most at risk, but today terrorists aim to create as much
chaos as possible – which makes their actions more unpredictable.”
“Where it was once embassies, military bases and cash centres which were on the
high-risk list, nowadays they are joined by night clubs, schools and public transport
hubs.”
“Even though Sweden has been relatively free of terrorist attacks, events elsewhere
in Europe have affected the outlook many people have here. We need to feel safe, but
when threat levels are on the rise, it creates a growing sense of insecurity.”
Chetanya Vali, perimeter protection specialist, India
“One of the major challenges high-risk sites are tackling in India is how to manage
access. This covers everything from authorisation control to monitoring and tracking
the movement of people.
“Sites want to have more control and be better prepared for the risks they face, so
I can see high-security protection moving to another level in coming years, becoming
more integrated through central command and control centres.”
Laurie Mugridge, entrance security expert, Australia
“Much as in other parts of the world, different types of buildings are now con-
sidered to be at high risk. The list has grown from premises such as embassies,
defence bases and prisons to include sites such as data centres and news offices.
“In Australia much of the perceived threat is from shootings so many sites are
fitting bullet-resistant doors and glazing.”
The Internet of Things (IoT)
According The Guardian, “at its core, IoT is simple: it’s about
connecting devices over the internet, letting them talk to us,
applications, and each other.”
According to Ericsson, IoT is about “enabling anything to be
connected and providing ’smartness’to these connected things”
What does this mean for the world of security?
“What used to be a single product will become part of a system
of connected products, or a whole system of systems, allow-
ing monitoring, remote control, optimisation and autonomous
operation,”explains Srdjan Malbasic, Director of Solutions
Development at Gunnebo.
“Moreover, data generated by these products will be used to
provide valuable business analytics for customers.”
Entrance security gates are one such example. Traffic data
can be analysed to show patterns in people flow and behaviour.
This is particularly useful for retailers as it generates data such
as footfall, time spent in the store before going to the checkout
and conversion rate. This helps for instance when measuring the
efficacy of a campaign or setting staffing levels.
GLOBAL#4

8. GLOBAL #4
Quick Guide
to Seveso Sites
THE SEVESO DISASTER
In 1976 an industrial accident occurred at a chemi-
cal manufacturing plant near the Italian community
of Seveso which led to the aerial release of 6 tonnes
of chemicals. As a result resident populations were
exposed to high concentrations of TCDD, a highly toxic
chemical.
The severity of the accident prompted the adoption
of European-wide legislation on the prevention and
control of such accidents. This law became known as
the Seveso Directive and aims to improve the safety
of sites containing large quantities of dangerous sub-
stances.
HISTORY OF THE SEVESO DIRECTIVE
The first Directive came into force in 1982, was amend-
ed in 1996 and again in 2012. The current legislation –
Seveso-III or Directive 2012/18/EU – takes into account
changes in European Union legislation on the classifica-
tion of chemicals and increased rights for citizens to
access information.
IMPACT
Even though the EU has a high rate of industrialisation,
the Seveso Directive has helped keep the number of
major accidents down. The Directive is also used as a
benchmark for industrial accident policy and for legisla-
tion in many countries outside of the EU.
2000–2002 2003–2005 2006–2008 2009–2011
20
40
60
80
100
NUMBER OF MAJOR ACCIDENTS IN THE EU
Source: European Commission Report on the Seveso Directive (2013)
83
7981
78
8

9. GLOBAL#4 9
UPPER AND LOWER TIER
Depending on the amount of dangerous substances
present, sites are classed as either lower or upper tier.
There are stricter regulations for upper tier sites.
TYPES OF SEVESO SITES
The Directive now applies to more than 10,000 indus-
trial sites across the EU, mainly in the chemical, petro-
chemical, logistics and metal refining sectors. 49 activi-
ties are used to categorise Seveso sites in total.
Among the 49 activities used to categorize the
­Seveso establishments, seven activities contribute to
50% of establishments:
Neither military sites not nuclear power plants are
included in the Directive. Military sites are exempt
because their inclusion would make certain informa-
tion public which would be a threat to national security.
Safety at nuclear power plants is already covered by
other legislation.
MAIN REQUIREMENTS FOR SEVESO SITES
Operators of Seveso sites are obliged to take all necessary measures
to prevent major accidents and to limit their consequences for
human health and the environment. The requirements include:
• Notification of all concerned establishments
• Deploying a major accident prevention policy
• Producing a safety report for upper-tier establishments
• Producing internal emergency plans for upper tier establishments
• Providing information in case of accidents
• Fuel storage (including heating, retail sale, etc.)
• Wholesale and retail storage and distribution
(excluding LPG)
• LPG storage
• General chemicals manufacture
• Production of basic organic chemicals
• Power generation, supply and distribution
• LPG production, bottling and bulk distribution
European Commission website,
EU reports, Wikipedia
SOURCES
2011
2,000
Upper Tier Lower Tier
4,000
6,000
8,000
10,000
12,000
Source: figures are for 2011 as released in
the European Commission Report on the
Seveso Directive (2013).
5,523
4,791
10,314

10. #4BACK
OFFICE
#5CIT
TRANSFER
#3VIDEO
SURVEILLANCE
FOOD MARKET
REFRIGERATOR UNIT
GLOBAL #410

11. 11
Inside Security: The Petrol Station
CCTV and monitoring systems may suffice for a simple
forecourt, but with an integrated convenience store,
petrol stations need to operate security like a retailer.
This means expanding traditional surveillance to
include cash management and access control. The
graphic below highlights the five areas of the store
which petrol stations address and the security they use.
#1 FRONT OFFICE
CASH DEPOSIT
Cash is rapidly and securely deposited into
an under-the-counter unit.
CASH RECYCLING
A system which also returns cash to the cus-
tomer and therefore needs less emptying.
ACCESS CONTROL
Authorised staff enter the counter area once
authenticated via a card or PIN.
PASS-THROUGH TRAY
Allows customers to be served late at night
whilst keeping the shop entrance closed.
#2 STORE ENTRANCE
INTRUSION DETECTION &
ALARM SYSTEMS
Anyone entering an unauthorised area is
detected and triggers an alarm. Smoke and
fire sensors are also integrated as part of the
alarm system.
#3 VIDEO SURVEILLANCE
CCTV
Strategically placed cameras record and
analyse activity inside and out.
REMOTE MONITORING
Potential threats are monitored through
the integrated management of surveillance
systems at a remote alarm centre.
#4 BACK OFFICE
CASH SAFE
A certified safe fitted with a high-security
electronic lock stores cash safely in the back
office.
#5 CIT TRANSFER
TRANSFER SAFE
Using a one-time code, cash is collected by
cash in transit services from a transfer unit
connected to the back office.
GLOBAL#4
#1
BA
A
C
CIT TRANSFE
Transfer Safe
# 5
MAGAZINES
COFFEE STATION
FRONT
OFFICE
COUNTER
#2STORE
ENTRANCE

12. GLOBAL #412
From a hammer and chisel to solid explosives, as criminals up the ante,
ATM safes are in a constant battle to provide a sufficient level of protection.
Rob Suddaby
Smash and Grab
ATMs Under Attack
ATMs are a global product and are essentially the same
the world over – located close to the street and full of
cash. Unsurprising then that they have been a prime
target for criminals for several decades.
“We see a clear cycle in terms of attacks on ATMs,”
says Pieter de Vlaam, Gunnebo’s certification specialist
for safes. “The criminals choose their method of attack
and optimise it over time. The industry then reacts by
developing new forms of protection against these types
of attacks and rolls them out. The criminals then adapt
their approach and so the cycle continues.”
This evolution of attack methodology had been ob-
served globally. It always starts with simple tools which
eventually become more sophisticated as the ATM
installed base in that country is upgraded.
“However, you can see from the cycle that the criminals
are one step ahead,”continues Pieter. “Old ATM safes
could be broken into, for example, with basic electrical
or thermal tools, such as an angle grinder or an oxyace-
tylene torch. This was combatted through the installa-
tion of more stringently tested, higher grade safes, so
instead criminals started pumping gas into the safe to
blow the door off.”
The latest generation of ATM safes now has to deal
with the latest threat level – solid explosives.
“Often the level of ATM protection is too low – a
decision taken because of cost,”concludes Pieter. “But
ultimately a higher price is paid when an attack wave
targets an ATM installed base with insufficient levels of
security.”
REACH ME AT
Pieter de Vlaam has been part of the security
industry for over 30 years. During this time he
has worked in engineering, product development,
plant management, product management and
product testing & certification.
Today Pieter manages Gunnebo’s online training
centre whilst lecturing on security management
and working actively with the drafting of
international standards for the certification
of burglary and fire resistant products.
PIETER DE VLAAM
pieter.devlaam@gunnebo.com

13. GLOBAL#4 13
ATM stands for automated teller machine – a ‘teller’ being
the person who traditionally deals directly with customers
in a bank. The ATM is also known as a cash machine, cash-
point and, more familiarly, the hole in the wall.
The first ATM was installed in the UK in 1967 and before
the decade was out, cash machines could also be found in
Sweden, Spain, the USA and Australia. According to Retail
Banking Research, today there are an estimated 3 million
ATMs worldwide.
ABOUT THE ATM
THE
ATTACK
CYCLEROLL-OUT
OF NEW TECH
Over a number of years, the new
technology eventually replaces
the old. Criminals will adapt
and find new ways of getting
what they want.
ATTACKS
Criminals choose their method
of attack. If old forms of protec-
tion are still being used, they will
continue to target these weak
links until the “market”dries up.
ATTACKS
OPTIMISED
Criminals optimise their method
of attack over time and successful
methods spread geographically.
NEW PROTECTION
DEVELOPED
Security experts and safe manu-
facturers react by developing new
forms of protection against existing
attacks and drive improvements in
security standards.
1
4
2
3

14. GLOBAL #414
1994–2007
Mixed Methods of Attack
1994 saw the introduction of EN 1143-1 – a
­tougher and more exacting standard set in Europe,
supplanting the UL standard which had been
­globally applied since the 60s.
ATM safes could be certified in four grades and
were strong enough to protect the cash inside
from classic electrical and thermal tools.
However, with such a large install base, replac-
ing and upgrading ATM safes takes time so even
after the advent of EN 1143-1, UL safes were still
prevalent in some countries. During this period the
range of attack methods differed considerably –
from basic to more advanced – depending on the
country and the level of adoption of stronger safes.
2007–2013
The Emergence of Gas Attacks
In countries where EN had sufficiently replaced UL
– and the flow of “easy cash”had dried up – crimi-
nals started to get inventive.
By pumping gas into the ATM and then igniting it,
they were able to blow the door off.
These types of attack started in Italy and although
initial success rates were low, once criminals had
spent a few years perfecting the technique, it
spread to other European countries such as France,
the UK, Germany and the Netherlands.
ATM Safes
History of Protection
1960–1975
Basic Tools Do the Job
The first ATMs had safes which unsurprisingly did
not offer a great deal of protection for the cash
inside.
These could be opened in a matter of minutes with
tools you could find in someone’s shed, such as a
hammer and chisel.
As the level of these attacks increased, banks
started to switch to a safe offering a higher level of
protection
1975–1994
Enter Power Tools
As more and more banks upgraded their safes,
criminals were forced to adapt their methods.
The result was a rise in the use of grinders and
oxyacetylene torches. Most safes were still made
of pure steel so attacking them with a grinder or
torch was like a knife through butter.

15. GLOBAL#4 15
1960–1975
1975–1994
1994–2007
2007–2013
2013–to present
Basic Tools
Do the Job
Enter Power
Tools
The Emergence
of Gas Attacks
Mixed Methods
of Attack
Criminals
Keep Evolving
2013–to present
Criminals Keep Evolving
Today there are ATM safes available strong enough to withstand the maximum amount
of gas which can be pumped into them and ignited. They are also constructed in a smart
enough way so as to relieve some of the pressure caused by the build-up of gas. It means
that even if the safe bulges, the bolts and the door stay in place.
Sadly, these innovations have led to more aggressive methods of attack using solid ex-
plosives. Unlike gas attacks, where the blast is more localised and pressure-based, solid
explosives cause a lot of damage, or ‘fragmentation’, around the explosion. Despite the
strong chance that the blast will destroy much of the cash, coming away with 10% of the
notes from a fully loaded machine is still incentive enough for criminals to go in hard.
Fortunately, just as criminals evolve, so does the level of protection – ATM safe manufac-
turers are already offering explosion-resistant safes. However, the rate at which existing
ATMs are being replaced or upgraded means that it takes many years before ATM safes
offering the latest protection make up the bulk of the install base. And as long as this
remains the case, criminals will always be one step ahead.

16. To protect a site from a firearms or explosives attack, security doors and windows
offer a first-rate line of defence.
How do security doors and
windows differ from standard
reinforced doors and windows?
Security doors and security glazing are typically certified
for ballistic and/or blast resistance, offering a specific
level of protection in the event of an attack.
Who decides on the level
of certification?
Certification is awarded after testing in accordance with
recognised standards.
In Europe, standards for ballistic resistance, for exam-
ple, have been defined by international experts including
manufacturers, consumers, consultants, engineers and
public authorities.
The standards are not only based on the combined
knowledge of these specialists, but also draw from field
tests and the results of actual attacks.
GLOBAL #416
Security Doors and Windows:
Ballistic and Blast Resistance
EN 1522 Windows, doors and shutters
Defines seven resistance levels for pistols,
rifles and assault rifles (FB1 to FB7) and one
for shotguns (FSG).
Defines seven resistance levels for pistols
and rifles (BR1 to BR7) and two for shotguns
(SG1 and SG2). If security glazing is certified
together with the “NS”classification, this
means it passed the test without splinters.
An “S”designates that there were splinters.
BALLISTICS RESISTANCE STANDARDS
EN 1063 SECURITY GLAZING
What sort of weapons are
included in the tests?
Pistols, rifles, assault rifles and shotguns, as well as a
range of different types of ammunition, from soft core
to hardened steel core bullets.
FAQs

17. GLOBAL#4 17

18. GLOBAL #418
How is an explosion measured?
An explosion creates a shockwave or blast effect which is
referred to as the ‘incident pressure’.
When it meets an obstacle – such as a door – it cre-
ates a pressure peak and this is called ‘reflected pressure’.
Reflected pressure is about twice the force of incident
pressure. It is this reflected pressure that is taken into
account in standards.
After the shockwave comes a depression or ‘­negative
pressure’equivalent to about one third of the peak
­reflected pressure.
Are there different types
of explosion?
Two useful distinctions can be made between short
explosions lasting 5 to 20 milliseconds – called detona-
tions – and longer explosions lasting 200 milliseconds or
more – called deflagrations. Industrial gas explosions are
a common example of deflagration.
How are blast tests carried out?
There are two types of test: shock tube and outdoor.
In a shock tube test, a volume of air is kept under pres-
sure in a chamber and released via a tube. The door or
window being tested is placed at the end of the tube.
Outdoor tests are used to check the resistance of a
door or window against a TNT equivalent. The object
­being tested is placed at a specific distance from the
blast (between 3 to 5.5 metres).
Shock tube test for windows, doors and
enclosures. Defines four levels of ­resistance
(EPR1 to EPR4) for reflected pressure
­between 0.5 to 2 bar.
Outdoor test for windows, doors and enclo-
sures. Defines five levels of resistance (EXR1
to EXR5) for an explosive charge of between
3kg to 20kg of TNT and reflected pressure
between 2.5 to 28 bar.
BLAST RESISTANCE STANDARDS
EN 13123/124-1
EN 13123/142-2
FAQsPRESSURE
PRESSURE
TIME TIME
TWO TYPES OF EXPLOSION
Pressure units: 1 bar = 10t/m2
Time unit: Millisecond (ms)
Max pressure
Specific positive
impulsion
DETONATION DEFLAGRATION

19. ... GREATER THAN THE
SUM OF ITS PARTS
Cash Management | Entrance Security | Safes & Vaults | Electronic Security
www.gunnebo.com

20. gunnebo.com gunnebogroup.com
THE GUNNEBO GROUP
Gunnebo is a global leader in security products, services and
solutions with an offering covering cash handling, safes and
vaults, entrance security and electronic security for banks,
retail, CIT, mass transit, public & commercial buildings and
industrial & high-risk sites.
We make your world safer.
CONTACT US
Products and Solutions
www.gunnebo.com
Investor Relations
www.gunnebogroup.com
ADDRESS
Gunnebo AB, P.O. Box 5181, 402 26 Gothenburg, Sweden
E-mail: info@gunnebo.com
Tel: +46 10 209 5000
RESPONSIBLE PUBLISHER
Karin Wallström
Group Marketing & Communication Director
+46 10 2095 026
karin.wallstrom@gunnebo.com
EDITOR AND CONTRIBUTOR
Rob Suddaby
rob.suddaby@gunnebo.com
GRAPHIC DESIGN
Emma Agnred
emma.agnred@gunnebo.com
CONTACTS AND INFO
TRANSLATION
Comactiva, www.comactiva.se
PRODUCTION OF LANGUAGE VERSIONS
Newsroom, www.newsroom.se
PRINTING
Larsson Offsettryck, www.larssonoffsettryck.se
Images from iStock, Animals Animals/Earth
Scenes and Gunnebo AB
gunnebo.com gunnebogroup.com