garage
•
0 likes•229 views
The document contains construction drawings for a building project including elevations with dimensions for the foundation, walls, and roof at different heights. It lists materials for the siding, windows, doors, and other elements. Notes indicate the drawings are preliminary and not to be used for permitting or construction without authorization from the consultant.
Report
Share
Report
Share
Download to read offline
Recommended
Sheet plan legend for Building design 
This document contains floor plans for a multi-level building including a ground floor, 7 upper levels, and an underground parking level. The ground floor plan shows room labels and a legend identifying main lobby, offices, elevators, and stairs. The level 1-7 plan shows room labels, and legends for offices, elevators, stairs, men's and women's restrooms. The underground parking level plan shows a parking space legend, elevators, stairs, and vestibule. Consultant information is listed at the top.
detail door-Layout4
This document contains technical drawings and details for an indoor sliding glass wall system. The drawings include scale notes, material specifications, and component details such as glass panels, an electric belt drive operator, stainless steel brackets, rubber rollers, floor and wall channels, and mounting hardware. Dimensioned detail views are provided for section cuts A-A and B-B.
Analytical Project - Sheet - S-6 - Sections
This document contains architectural plans and sections for a building project including:
- Floor plans showing floor levels from the foundation to the roof.
- Sections showing retaining walls, foundation slabs, and a drain.
- Details including a section showing a retaining wall and drain.
MCFEE_AARON_PALACE_OF_ASSEMBLY
The document contains 18 architectural drawings for the Palace of Assembly designed by Le Corbusier. The drawings include site plans, floor plans, elevations, sections, and renderings of the building at different times of day. They were created using Autodesk Revit and drawn by Aaron McFee for a spring 2015 project at Penn College of Technology.
Work holding on drill press
This document discusses various methods for securely holding workpieces on a drill press to prevent damage and ensure safety. It describes the use of vises, vee-blocks, step blocks, angle plates, hand vices, drill jigs, and strap clamps to clamp round, square, odd-shaped, and sheet metal pieces in a stable position for drilling holes in production quantities or one-off jobs. Secure clamping of workpieces is essential on a drill press to hold the material steady during the drilling operation.
Assignment 2 - Final Documentation
This document contains architectural plans and drawings for a container house project. The drawings include site plans, floor plans, sections, elevations and details showing how multiple shipping containers are connected and modified to form a residential dwelling. Dimensioned floor plans depict the layout and design of the living spaces, kitchen, bathroom and bedroom. Construction details illustrate how the containers are joined together and attached to concrete foundations.
Final Plans
This document contains drawings for a major project house, including:
- A site and town planning sheet outlining the site description and compliance with town planning controls.
- A site and drainage plan showing the proposed drainage layout.
- Floor plans for the ground floor and first floor, showing room layouts and dimensions.
- A foundation plan showing the proposed slab edge, strip footings, and drainage.
Apartment_Red
The document appears to be architectural plans for multiple floors of a building project including a ground floor, first floor, second floor, and third floor. Key elements summarized include a 5m wide driveway, 6m wide ramps between floors, layouts of residential units of varying sizes including bedrooms, living areas, kitchens and balconies. Mechanical, electrical and plumbing elements are also shown including shafts, HVAC and other utilities. Dimensioning and labeling is provided for most rooms and building elements.
Recommended
Sheet plan legend for Building design
This document contains floor plans for a multi-level building including a ground floor, 7 upper levels, and an underground parking level. The ground floor plan shows room labels and a legend identifying main lobby, offices, elevators, and stairs. The level 1-7 plan shows room labels, and legends for offices, elevators, stairs, men's and women's restrooms. The underground parking level plan shows a parking space legend, elevators, stairs, and vestibule. Consultant information is listed at the top.
detail door-Layout4
This document contains technical drawings and details for an indoor sliding glass wall system. The drawings include scale notes, material specifications, and component details such as glass panels, an electric belt drive operator, stainless steel brackets, rubber rollers, floor and wall channels, and mounting hardware. Dimensioned detail views are provided for section cuts A-A and B-B.
Analytical Project - Sheet - S-6 - Sections
This document contains architectural plans and sections for a building project including:
- Floor plans showing floor levels from the foundation to the roof.
- Sections showing retaining walls, foundation slabs, and a drain.
- Details including a section showing a retaining wall and drain.
MCFEE_AARON_PALACE_OF_ASSEMBLY
The document contains 18 architectural drawings for the Palace of Assembly designed by Le Corbusier. The drawings include site plans, floor plans, elevations, sections, and renderings of the building at different times of day. They were created using Autodesk Revit and drawn by Aaron McFee for a spring 2015 project at Penn College of Technology.
Work holding on drill press
This document discusses various methods for securely holding workpieces on a drill press to prevent damage and ensure safety. It describes the use of vises, vee-blocks, step blocks, angle plates, hand vices, drill jigs, and strap clamps to clamp round, square, odd-shaped, and sheet metal pieces in a stable position for drilling holes in production quantities or one-off jobs. Secure clamping of workpieces is essential on a drill press to hold the material steady during the drilling operation.
Assignment 2 - Final Documentation
This document contains architectural plans and drawings for a container house project. The drawings include site plans, floor plans, sections, elevations and details showing how multiple shipping containers are connected and modified to form a residential dwelling. Dimensioned floor plans depict the layout and design of the living spaces, kitchen, bathroom and bedroom. Construction details illustrate how the containers are joined together and attached to concrete foundations.
Final Plans
This document contains drawings for a major project house, including:
- A site and town planning sheet outlining the site description and compliance with town planning controls.
- A site and drainage plan showing the proposed drainage layout.
- Floor plans for the ground floor and first floor, showing room layouts and dimensions.
- A foundation plan showing the proposed slab edge, strip footings, and drainage.
Apartment_Red
The document appears to be architectural plans for multiple floors of a building project including a ground floor, first floor, second floor, and third floor. Key elements summarized include a 5m wide driveway, 6m wide ramps between floors, layouts of residential units of varying sizes including bedrooms, living areas, kitchens and balconies. Mechanical, electrical and plumbing elements are also shown including shafts, HVAC and other utilities. Dimensioning and labeling is provided for most rooms and building elements.
S.BehlenPortfolioProject
The document is a set of architectural and electrical drawings for a residential renovation project. It includes a cover sheet with project information and a drawing index. It also includes multiple drawings showing existing conditions that are being demolished and new proposed work for the attic, first floor, basement, and site for both architectural and electrical plans. The drawings were created by an architectural design firm for a residential client.
PG15036_A01-A17 ALLURE MARIBYRNONG PROPOSED SHOWROOM
This document provides plans and notes for a proposed bathroom showroom renovation located at 8A/169 Rosamond Rd in Maribyrnong, Victoria. It includes a locality plan showing the site location, floor plans detailing the existing and proposed layouts, and 44 general notes covering building requirements and regulations. The plans and notes are intended to obtain a building permit for renovating an existing tenancy into a new bathroom showroom.
How a Blue Print works
This document is a blueprint drawing for the Gateway WA: Perth Airport & Freight Access Project. It provides information on underground utilities in the project area to assist with permit applications to dig. The drawing contains surveyed and scanned location data for gas, power, sewer, water and other services. Notes explain that potholed locations are shown as symbols, surveyed utility lines have three letters and scanned lines have a single letter. It is intended as an initial investigation for permit applications and can be updated upon request with additional details like street lighting data.
412 Final Report
The report analyzes four scenarios for pressure maintenance in an oil reservoir through gas injection: no injection, 50% injection from the start, 50% injection after pressure drops below 2000 psia, and 100% injection. Volumetric calculations determine there is 74.576 MMSTB of original oil in place and 1,998.721 BCF of original gas in place. Permeability and skin factor are calculated from pressure buildup test data. Forecasting graphs show the 100% injection scenario results in the highest cumulative oil production over time, around 30 MMSTB over 12 years, along with the highest cumulative gas production of around 2 TCF. An economic analysis will determine the most profitable development plan.
Condo - Approved Plans
This document contains notes for a drawing that must not be scaled and any errors or omissions should be reported to the architect. The drawing is the exclusive property of the architects and any variations or modifications must receive written permission.
BURTON REMODEL 10-07-16
This document contains construction plans and specifications for remodeling a residential property located at 13907 Burton Street in Panorama City, CA. It includes three phases of construction work involving remodeling of bathrooms and other interior spaces, adding exterior decks and windows, and eventually installing a pool, jacuzzi, and surrounding patio area. The document provides details on the project scope, building design team, permits, phases of construction, and notes for contractors. Dimensions and details are included on the floor plans and construction drawings.
Why is the ocean blue?
Nothing is as mesmerising as the ocean’s blue colour - but what makes it blue? It’s physics of course, and the interaction between sunlight and Earthly matter. This is a brief story of the origins of the ocean blue.
Seen from space, light from the Sun is white. When it hits our atmosphere and the oceans beneath it, different colours begin to behave differently - blue light is scattered and red light absorbed, to a small degree. This difference in behaviour between colours is due to their different wavelengths and is formally described by a process called Rayleigh scattering. The wavelength with the highest scattering rate is around the visible spectrum, more precisely at 418nm. This specific wavelength is seen by humans as the colour, you’ve guessed it, blue.
Other colours, such as green, yellow and red, have progressively lower scattering and higher absorption rates. Going beyond the visible spectrum, into either the shortwave ultraviolet or longwave infrared, absorption rates rocket to an amazing 10,000,000 times higher than at their blue minimum. The ocean’s surface layer is practically blocking those wavelengths.
You may wonder, then, why water is tint-free in our everyday lives – a blue glass of water would definitely cause upset. The reason is that Rayleigh scattering needs larger quantities to really become evident. The more water is added, the bluer it will look.
Curiously, an ocean of the exact same chemical composition as one on Earth, but located on some far-away planet can be a completely different colour, such as violet. It is known, as per Rayleigh’s phenomenon, that the colour violet scatters even better than blue. But we (sadly!) do not have violet oceans because (1) human eyes aren’t great at detecting violet, (2) it forms only a minor part of our Sun’s spectrum and (3) it can be absorbed by the ozone layer.
Back to the blue ocean, another reason for its colour is that it simply reflects the blue sky above it. This is a straightforward explanation, but only leads us to wonder why is the sky blue? This is a different question with the same answer - Rayleigh scattering. As sunlight enters our atmosphere the blue wavelengths scatter most freely, bounce around and colour the sky, while yellow and red light travel more directly to us, thus giving the Sun has its distinctive yellow-red colour. This effect becomes more evident as the Sun is closer to the horizon. At that point the light has to travel through even more water vapour, pollution and dust to reach us, thus exaggerating the effect and causing beautiful red sunsets.
House Plan For Robert Ledwaba
This document contains plans and specifications for a 6 bedroom house with 2 garages. It includes a ground floor plan, elevations, sections, roof plan, ceiling level plan, and site plan. The plans are drawn at scales of 1:200 and 1:500. Specifications cover foundations, floors, walls, ceilings, roof construction, windows/doors, drainage, and other details. The project is described as a house plan for a 6 room house with 2 single garages.
159_TOMPKINS_residential 8X11
This document contains plans for a multi-story residential building located at 159 Tompkins Avenue in Brooklyn, New York. It includes floor plans for the cellar/basement, first, second, third, fourth, fifth and roof levels, showing room layouts, dimensions and labels. Engineering, architectural and owner contact information is listed in the title block. The drawings are marked as being issued for construction.
Introduction to Drawing: Planners drawings
Planners drawings are maps and diagrams used by town planners to show proposed developments, zoning plans, and land usage. They are typically drawn on tracing paper over maps at small scales using precise lines, colors, and lettering. Different types of planners drawings include proposal drawings, layout plans, and 3D drawings. Planners use color coding to designate zones for different land uses like residential, commercial, industrial, agricultural, and public spaces. Case studies demonstrate how planners drawings were used to plan the development of Saemangeum Island City in South Korea and zone the central business district of Sydney, Australia over time.
Drawing autocad
The document contains construction drawings and details for the roof, roof trusses, first floor, and construction details of a District Officer's House in Batu Gajah, Perak, Malaysia. The drawings include layouts, dimensions, materials, and technical details for the tiles, trusses, floor structure, and other building elements. They provide precise specifications for replicating the house design.
Architectural drawing
The document outlines the architectural drawing process in 4 steps:
1) Initial programming where the architect discusses the client's goals and needs.
2) Concept development where the architect presents rough sketches for approval and performs a feasibility report.
3) Design where the schematic drawings are developed into permit documents with site plans, floor plans, and elevations.
4) Construction drawing and permit acquisition where detailed construction drawings are used to build the project and permits are obtained.
Interior architect drawing
This document discusses interior architecture drawings. It begins with listing group members working on an interior architecture project. It then defines interior architecture as combining interior design and architecture, exploring how interiors of buildings are designed. The document outlines different types of interior architecture drawings including residential, commercial, healthcare, universal, and exhibition design. It describes the program brief, concept boards, sketches, drawings, and viewpoints used in interior architecture.
Architectural Drawing
Architectural drawings are used to illustrate building designs and provide instructions for construction. They include floor plans, elevations, sections, and details. Floor plans show the arrangement of rooms from above while elevations display the external appearance of each facade. Sections cut through the building to reveal interior construction. Details focus on specific elements at a larger scale. Architectural drawings are produced to scale using drafting tools or computer-aided design software. They allow architects to communicate designs to clients and facilitate building.
types of drawing
There are several types of construction drawings that provide different information about a building project. Architectural drawings give a complete view of the building and placement of parts. Structural drawings explain the building's strength, materials, and reinforcement details. Plumbing and sanitary drawings show water and fixture locations and connections. Electrical drawings describe wiring, fixtures, and load calculations. As-built drawings reflect changes made during construction to record differences from the original design.
Building bye laws CIVIL ENGINEERING DRAWING
The document discusses building bye-laws, which are strict rules that must be followed to regulate building construction and town planning. It outlines several purposes of bye-laws such as providing suitable areas for activities, avoiding traffic problems, and ensuring access to services. The document also defines several key terms related to building construction measurements and zoning. It provides details on rules for building heights, floors, parking, and other structural aspects regulated by local bye-laws.
Architectural drawings
This document discusses the types and purposes of architectural drawings. It begins by defining drawings and their uses. It then describes the different types of architectural drawings, including concept sketches, survey drawings, presentation drawings, municipal drawings, working drawings, and record drawings. For each type of drawing, it provides a brief explanation of its purpose. It also discusses the components and standards of architectural drawings, such as site plans, floor plans, elevations, and sections. Overall, the document provides a high-level overview of the key types of drawings used in architectural design and construction projects.
Plan, section, elevation revised
Lee W. Waldrep gave a presentation on becoming an architect. He discussed that architects must complete education, experience, and licensing to practice independently. Education involves a professional degree from an accredited program. Experience requires an internship with training in various areas like design, construction documents, and management. One must then pass the Architect Registration Exam to obtain licensure. The presentation provided resources for learning about architecture as a career.
Architecture drawing presentation
Architectural drawings are technical drawings used by architects to develop and communicate building design ideas. They include various standard views like floor plans, sections, elevations, and site plans. Floor plans show the arrangement of a building level and include furniture and fixtures. Site plans show the building footprint and surrounding context. Elevations display the front or sides of a building. Sections cut through a building to reveal interior details. Architectural drawings are scaled and use conventions for accurate representation and understanding of designs.
Logic Bundle Mgmt House + Site - Patterson House
This document contains technical drawings and specifications for a multi-level residential building project including floor plans, sections, and notes. Key details include dimensions and materials for foundations, walls, floors, stairs, windows, doors, and roofing. Specifications provide information on structural elements like reinforced concrete, masonry, and timber construction according to engineering standards.
01 architectural cycle 2 interactive
This cover sheet provides basic project information for renovations to an existing building for Link & Pin, LLC located at 1530 Elizabeth Ave, Suite 200 in Charlotte, NC. It includes the project address, consultants, sheet index, and general notes. The sheet is copyrighted and property of Cluck Design Collaborative.
More Related Content
Viewers also liked
S.BehlenPortfolioProject
The document is a set of architectural and electrical drawings for a residential renovation project. It includes a cover sheet with project information and a drawing index. It also includes multiple drawings showing existing conditions that are being demolished and new proposed work for the attic, first floor, basement, and site for both architectural and electrical plans. The drawings were created by an architectural design firm for a residential client.
PG15036_A01-A17 ALLURE MARIBYRNONG PROPOSED SHOWROOM
This document provides plans and notes for a proposed bathroom showroom renovation located at 8A/169 Rosamond Rd in Maribyrnong, Victoria. It includes a locality plan showing the site location, floor plans detailing the existing and proposed layouts, and 44 general notes covering building requirements and regulations. The plans and notes are intended to obtain a building permit for renovating an existing tenancy into a new bathroom showroom.
How a Blue Print works
This document is a blueprint drawing for the Gateway WA: Perth Airport & Freight Access Project. It provides information on underground utilities in the project area to assist with permit applications to dig. The drawing contains surveyed and scanned location data for gas, power, sewer, water and other services. Notes explain that potholed locations are shown as symbols, surveyed utility lines have three letters and scanned lines have a single letter. It is intended as an initial investigation for permit applications and can be updated upon request with additional details like street lighting data.
412 Final Report
The report analyzes four scenarios for pressure maintenance in an oil reservoir through gas injection: no injection, 50% injection from the start, 50% injection after pressure drops below 2000 psia, and 100% injection. Volumetric calculations determine there is 74.576 MMSTB of original oil in place and 1,998.721 BCF of original gas in place. Permeability and skin factor are calculated from pressure buildup test data. Forecasting graphs show the 100% injection scenario results in the highest cumulative oil production over time, around 30 MMSTB over 12 years, along with the highest cumulative gas production of around 2 TCF. An economic analysis will determine the most profitable development plan.
Condo - Approved Plans
This document contains notes for a drawing that must not be scaled and any errors or omissions should be reported to the architect. The drawing is the exclusive property of the architects and any variations or modifications must receive written permission.
BURTON REMODEL 10-07-16
This document contains construction plans and specifications for remodeling a residential property located at 13907 Burton Street in Panorama City, CA. It includes three phases of construction work involving remodeling of bathrooms and other interior spaces, adding exterior decks and windows, and eventually installing a pool, jacuzzi, and surrounding patio area. The document provides details on the project scope, building design team, permits, phases of construction, and notes for contractors. Dimensions and details are included on the floor plans and construction drawings.
Why is the ocean blue?
Nothing is as mesmerising as the ocean’s blue colour - but what makes it blue? It’s physics of course, and the interaction between sunlight and Earthly matter. This is a brief story of the origins of the ocean blue.
Seen from space, light from the Sun is white. When it hits our atmosphere and the oceans beneath it, different colours begin to behave differently - blue light is scattered and red light absorbed, to a small degree. This difference in behaviour between colours is due to their different wavelengths and is formally described by a process called Rayleigh scattering. The wavelength with the highest scattering rate is around the visible spectrum, more precisely at 418nm. This specific wavelength is seen by humans as the colour, you’ve guessed it, blue.
Other colours, such as green, yellow and red, have progressively lower scattering and higher absorption rates. Going beyond the visible spectrum, into either the shortwave ultraviolet or longwave infrared, absorption rates rocket to an amazing 10,000,000 times higher than at their blue minimum. The ocean’s surface layer is practically blocking those wavelengths.
You may wonder, then, why water is tint-free in our everyday lives – a blue glass of water would definitely cause upset. The reason is that Rayleigh scattering needs larger quantities to really become evident. The more water is added, the bluer it will look.
Curiously, an ocean of the exact same chemical composition as one on Earth, but located on some far-away planet can be a completely different colour, such as violet. It is known, as per Rayleigh’s phenomenon, that the colour violet scatters even better than blue. But we (sadly!) do not have violet oceans because (1) human eyes aren’t great at detecting violet, (2) it forms only a minor part of our Sun’s spectrum and (3) it can be absorbed by the ozone layer.
Back to the blue ocean, another reason for its colour is that it simply reflects the blue sky above it. This is a straightforward explanation, but only leads us to wonder why is the sky blue? This is a different question with the same answer - Rayleigh scattering. As sunlight enters our atmosphere the blue wavelengths scatter most freely, bounce around and colour the sky, while yellow and red light travel more directly to us, thus giving the Sun has its distinctive yellow-red colour. This effect becomes more evident as the Sun is closer to the horizon. At that point the light has to travel through even more water vapour, pollution and dust to reach us, thus exaggerating the effect and causing beautiful red sunsets.
House Plan For Robert Ledwaba
This document contains plans and specifications for a 6 bedroom house with 2 garages. It includes a ground floor plan, elevations, sections, roof plan, ceiling level plan, and site plan. The plans are drawn at scales of 1:200 and 1:500. Specifications cover foundations, floors, walls, ceilings, roof construction, windows/doors, drainage, and other details. The project is described as a house plan for a 6 room house with 2 single garages.
159_TOMPKINS_residential 8X11
This document contains plans for a multi-story residential building located at 159 Tompkins Avenue in Brooklyn, New York. It includes floor plans for the cellar/basement, first, second, third, fourth, fifth and roof levels, showing room layouts, dimensions and labels. Engineering, architectural and owner contact information is listed in the title block. The drawings are marked as being issued for construction.
Introduction to Drawing: Planners drawings
Planners drawings are maps and diagrams used by town planners to show proposed developments, zoning plans, and land usage. They are typically drawn on tracing paper over maps at small scales using precise lines, colors, and lettering. Different types of planners drawings include proposal drawings, layout plans, and 3D drawings. Planners use color coding to designate zones for different land uses like residential, commercial, industrial, agricultural, and public spaces. Case studies demonstrate how planners drawings were used to plan the development of Saemangeum Island City in South Korea and zone the central business district of Sydney, Australia over time.
Drawing autocad
The document contains construction drawings and details for the roof, roof trusses, first floor, and construction details of a District Officer's House in Batu Gajah, Perak, Malaysia. The drawings include layouts, dimensions, materials, and technical details for the tiles, trusses, floor structure, and other building elements. They provide precise specifications for replicating the house design.
Architectural drawing
The document outlines the architectural drawing process in 4 steps:
1) Initial programming where the architect discusses the client's goals and needs.
2) Concept development where the architect presents rough sketches for approval and performs a feasibility report.
3) Design where the schematic drawings are developed into permit documents with site plans, floor plans, and elevations.
4) Construction drawing and permit acquisition where detailed construction drawings are used to build the project and permits are obtained.
Interior architect drawing
This document discusses interior architecture drawings. It begins with listing group members working on an interior architecture project. It then defines interior architecture as combining interior design and architecture, exploring how interiors of buildings are designed. The document outlines different types of interior architecture drawings including residential, commercial, healthcare, universal, and exhibition design. It describes the program brief, concept boards, sketches, drawings, and viewpoints used in interior architecture.
Architectural Drawing
Architectural drawings are used to illustrate building designs and provide instructions for construction. They include floor plans, elevations, sections, and details. Floor plans show the arrangement of rooms from above while elevations display the external appearance of each facade. Sections cut through the building to reveal interior construction. Details focus on specific elements at a larger scale. Architectural drawings are produced to scale using drafting tools or computer-aided design software. They allow architects to communicate designs to clients and facilitate building.
types of drawing
There are several types of construction drawings that provide different information about a building project. Architectural drawings give a complete view of the building and placement of parts. Structural drawings explain the building's strength, materials, and reinforcement details. Plumbing and sanitary drawings show water and fixture locations and connections. Electrical drawings describe wiring, fixtures, and load calculations. As-built drawings reflect changes made during construction to record differences from the original design.
Building bye laws CIVIL ENGINEERING DRAWING
The document discusses building bye-laws, which are strict rules that must be followed to regulate building construction and town planning. It outlines several purposes of bye-laws such as providing suitable areas for activities, avoiding traffic problems, and ensuring access to services. The document also defines several key terms related to building construction measurements and zoning. It provides details on rules for building heights, floors, parking, and other structural aspects regulated by local bye-laws.
Architectural drawings
This document discusses the types and purposes of architectural drawings. It begins by defining drawings and their uses. It then describes the different types of architectural drawings, including concept sketches, survey drawings, presentation drawings, municipal drawings, working drawings, and record drawings. For each type of drawing, it provides a brief explanation of its purpose. It also discusses the components and standards of architectural drawings, such as site plans, floor plans, elevations, and sections. Overall, the document provides a high-level overview of the key types of drawings used in architectural design and construction projects.
Plan, section, elevation revised
Lee W. Waldrep gave a presentation on becoming an architect. He discussed that architects must complete education, experience, and licensing to practice independently. Education involves a professional degree from an accredited program. Experience requires an internship with training in various areas like design, construction documents, and management. One must then pass the Architect Registration Exam to obtain licensure. The presentation provided resources for learning about architecture as a career.
Architecture drawing presentation
Architectural drawings are technical drawings used by architects to develop and communicate building design ideas. They include various standard views like floor plans, sections, elevations, and site plans. Floor plans show the arrangement of a building level and include furniture and fixtures. Site plans show the building footprint and surrounding context. Elevations display the front or sides of a building. Sections cut through a building to reveal interior details. Architectural drawings are scaled and use conventions for accurate representation and understanding of designs.
Viewers also liked (20)
PG15036_A01-A17 ALLURE MARIBYRNONG PROPOSED SHOWROOM
PG15036_A01-A17 ALLURE MARIBYRNONG PROPOSED SHOWROOM
Similar to garage
Logic Bundle Mgmt House + Site - Patterson House
This document contains technical drawings and specifications for a multi-level residential building project including floor plans, sections, and notes. Key details include dimensions and materials for foundations, walls, floors, stairs, windows, doors, and roofing. Specifications provide information on structural elements like reinforced concrete, masonry, and timber construction according to engineering standards.
01 architectural cycle 2 interactive
This cover sheet provides basic project information for renovations to an existing building for Link & Pin, LLC located at 1530 Elizabeth Ave, Suite 200 in Charlotte, NC. It includes the project address, consultants, sheet index, and general notes. The sheet is copyrighted and property of Cluck Design Collaborative.
Dick Smith
This document contains plans and specifications for a Dicksmith store renovation project. It includes a cover page, drawing list, feasibility plan, floor plan, and notes. The feasibility plan provides fixture layout and quantities. The floor plan shows the proposed flooring materials for each area. Notes provide instructions and requirements for the project.
Brisbane ferries project drawings
This document provides a cover sheet and legend for architectural drawings for a new CityCat ferry terminal. It includes a project description, list of drawings, abbreviations legend and general notes. The legend defines abbreviations used on the drawings and notes provide guidance on materials and construction methods. The project involves construction of a new ferry terminal with waiting area, gangway, pontoon and associated infrastructure at Macarthur Avenue, Hamilton QLD.
A1.pdf
This document contains floor plans and details for the office improvement of Unit 3102 at the 31st floor of Alveo Financial Tower in Makati City, Philippines. It includes a floor plan layout with room dimensions, material specifications, and plumbing, electrical, mechanical, and architectural details. The plans were prepared by an architect and engineering firm for the owner, Mr. Ichiro Chujo.
1359_A-404-J_1400-DESK-GA-WM
The document asserts copyright over the design plans shown. It provides details for a 1400mm wide desk, including dimensions, materials used, and drawings with details about the construction. Key specifics include solid wood and veneer finishes, fabric and leather accents, and dovetailed drawers with soft-close runners. Approval is needed from a company director to use or modify the design.
A2.pdf
This document contains plans and details for an office improvement project located at Alveo Financial Tower, 31st Floor - Unit 3102. It includes a floor plan showing a 12mm frameless tempered glass wall, 2-leaf 12mm frameless double swing tempered glass door, carpet and granite tile flooring materials, and drywall partitions. Accompanying details show the door hinges, flooring systems, and reflected ceiling plan.
Sample work_Danieli project
This document contains architectural plans and drawings for the detailed design phase of the Eshtehard Danieli Ind. Complex project in Iran. It includes a key plan showing the location of the canteen, floor plans of the basement level of the canteen showing furniture layout and ceiling plans, schedules for doors and windows, general notes and a list of drawings. Dimensions, materials and other details are provided in schedules, notes and on the drawings. The project involves designing heavy metallurgical equipment structures for the industrial complex.
20150811-Allied Telecom
This document provides project details for tenant improvements at Allied Telecom Group LLC in Arlington, Virginia. It includes the project name and number, architects, engineers, applicable building codes, scope of work, building information on construction type and fire resistance ratings, occupancy load calculations, and plumbing fixture requirements. Egress widths, door types, and notes on metal stud construction are also included.
Eden Price List
This document contains details of residential units for sale, including the unit number, type, number of beds and baths, floor area, block number, floor number, parking bay number, exclusive use area, and selling price. There are listings for 32 units of various types, including Type G (2 bed, 2 bath) and Type A1 (2 bed, 1 bath) units. For each unit, the document provides information on the section number, unit size, location within the block, floor level, assigned parking bay, and current selling price.
Farmers PDC Chino CA
The document provides a code analysis summary for a proposed tenant improvement project at an existing one-story building. The building has a footprint of 159,515sf and total area of 174,568sf. The occupancies include office, production, and warehouse. The analysis finds the building meets egress requirements based on an increased occupant load of 788. Accessibility and parking requirements are identified.
Greenbanks
This document contains plans and elevations for a new residential building project including:
- Ground floor and first floor plans showing the layout of rooms and locations of doors and windows.
- Elevations of the building showing exterior wall materials including metal cladding, brick slips, and render.
- Sections through the building showing floor heights, roof pitch, and structure including beams and blocks.
- An outline specification listing proposed materials for foundations, walls, roofing, doors/windows, finishes and more.
At of modern building which create abvolated view
This document contains architectural drawings and details for a multi-story building project located in Afara. It includes a site development plan, floor plans for the ground floor through roof deck, building elevations, sections and window/stair details. The plans provide information on the layout and dimensions of the building.
M-CA-120_CONSOLE-DESK_GA-WM
The document is a design plan for a console desk. It includes details on materials, dimensions, revisions, and sections/details of the desk design. Copyright of the design is asserted along with notes that it cannot be used without approval. There are notes on wood finishes, metal finishes, included appliances like a mini-bar fridge, and revisions made on dates ranging from April 2015 to June 2015.
Freelance project management commercial - Case Study
This document contains plans and drawings for a proposed mezzanine floor addition and security improvements to a commercial property. The plans include a ground floor plan, first floor mezzanine plan, proposed mezzanine structural plan, and section showing the proposed addition. Additional drawings show proposed security improvements like fencing, gates and signage for the property entrance. The project aims to gain planning approval for the mezzanine floor and security upgrades while complying with protected area requirements.
Pearce avenue
This document contains architectural plans and details for a residential home renovation project including:
- Proposed ground and first floor plans showing room layouts and dimensions.
- Elevations, sections and details showing building materials, wall assemblies, roof design and fenestration.
- A schedule of windows and doors.
- Notes regarding compliance with building regulations and specifications to be confirmed.
Pearce Avenue Project
This document contains architectural plans and details for a residential home renovation project including:
- Proposed ground and first floor plans showing room layouts and dimensions.
- Elevations, sections and details of proposed materials, windows and construction methods.
- A schedule of proposed windows.
- Notes regarding compliance with building regulations and engagement of structural engineers.
1204-M17-tv-unit-WM
The document is a design plan for a McLaren TV element. It includes details on materials, dimensions, and assembly. Copyright and approval rights are asserted for the design. Revisions are tracked. The front ornament frame is noted to be removable for maintenance. Dimensions, materials, and assembly details are provided for all components through diagrams and sections.
GA-01.pdf
The document contains architectural drawings showing sections and details of proposed building foundations and structures. It includes 5 sections and 2 details of foundations, showing elements like rubble masonry walls, isolation joints, ground floor slabs, sand and polythene layers. It also provides notes on dimensions, materials, specifications, and abbreviations. The scale of the drawings ranges from 1:5 to 1:30.
Red Reedbuck Bush Lodge
This document contains site plans, floor plans, and elevations for a proposed bush camp project in Lesoma, Zimbabwe. It includes:
- A site plan at a scale of 1:500 showing the layout of the main building, staff accommodation, tent units, parking, and other site features.
- Floor plans at 1:75 scale of the main building interior layout and tent unit layout.
- Elevations, sections, and construction details at various scales showing wall, roof, and foundation construction methods using sandbags and timber frames.
- A schedule listing the areas of the different structures, number of parking spaces, and revisions made to the drawings.
Similar to garage (20)
Freelance project management commercial - Case Study
Freelance project management commercial - Case Study
garage
- 1. fin. floor 0 t/o plate 3524 fin. garage 600 t/o high plate 5410 roof mid height 4734 3 12 3 12 SIDING AS PER OWNER WINDOWS AS PER OWNER DOORS AS PER OWNER TIGHT BOARD FENCE ON EXTENDED LANDSCAPE RETAINING WALL AS PER SITE PLAN NEW LANDSCAPE RETAINING WALL AS PER SITE PLAN W1 ASPHALT SHINGLES 20829871182 PREFINISHED METAL EAVESTROUGH PREFINISHED VENTED SOFFIT fin. floor 0 t/o plate 3524 fin. garage 600 t/o high plate 5410 roof mid height 47343 12 TIGHT BOARD FENCE ON EXTENDED LANDSCAPE RETAINING WALL AS PER SITE PLAN SIDING AS PER OWNER EXPOSED CONCRETE fin. floor 0 t/o plate 3524 fin. garage 600 t/o high plate 5410 SIDING AS PER OWNER TIGHT BOARD FENCE ON EXTENDED LANDSCAPE RETAINING WALL AS PER SITE PLAN ASPHALT SHINGLES EXPOSED CONCRETE fin. floor 0 t/o plate 3524 fin. garage 600 t/o high plate 5410 SIDING AS PER OWNER WINDOWS AS PER OWNER NEW LANDSCAPE RETAINING WALL AS PER SITE PLAN ASPHALT SHINGLES W1 W1 W1W1 11829531182914 EXPOSED CONCRETE PREFINISHED METAL FLASHING ISSUED FOR: PRELIMINARY ONLY DRAWINGS “ISSUED AS PRELIMINARY” ARE USED TO SHOW PROGRESS ON THE PROJECT, TO PERMIT COORDINATION, OR FOR REVIEW. UNDER NO CIRCUMSTANCES ARE THEY TO BE USED FOR PERMIT APPLICATIONS, CONSTRUCTION, OR PRICING PURPOSES UNLESS SO AUTHORIZED BY THE CONSULTANT. Client Project Drawing: Orientation Checked by: Time Stamp: Designed by:Project No. Drawing No. Stamp Drawn by: Approved by: This drawing has been created electronically. Handwritten or manual revisions to the drawing are only valid when accompanied by the design engineer's initials. Do not scale drawings. Check and verify all dimensions and information on the drawings and report all errors or ommissions to the Consultant before proceeding with the work. This drawing shall not be reproduced in any manner, in part or in whole, for any project other than that for which it was prepared. this drawing, and all design concepts it contains, are an instrument of professional service and remain the property of Gerrits Engineering. X:100143 Gerrits Engineering143-015-09 Gerrits GarageDrawings143-015-09 frank.rvt 7/19/2011 5:41:29 PM ELEVATIONS JC A300 KS/WD FG FG SCALE: 1 : 50 NORTH ELEVATION1 SCALE: 1 : 50 SOUTH ELEVATION3 SCALE: 1 : 50 EAST ELEVATION2 SCALE: 1 : 50 WEST ELEVATION4 No. Issuance Description Date 1 ISSUED FOR BUILDING PERMIT JULY 15, 2009 2 MEZZANINE DELETED JULY 24, 2009