Messung specializes in servo and motion control automation solutions, offering integrated systems for various industries including packaging, printing, and textiles. Their technology, which incorporates programmable logic controllers, motion control systems, and high-performance drives, enhances precision, flexibility, and efficiency in factory automation. With over four decades of expertise, Messung aims to provide tailored and innovative solutions to meet the evolving demands of industrial automation.

1. FULL SPEED AHEAD
WITH MESSUNG SERVO & MOTION
CONTROL AUTOMATION

3. ABOUT SERVO & MOTION
CONTROL AUTOMATION
Motion control is a sub-field of automation, encompassing the systems or
sub-systems involved in moving parts of machines in a controlled manner.
Motion control is an important part of robotics and CNC machine tools, and is
widely used in the packaging, printing, textile, semiconductor production, and
assembly industries.
(Source: https://en.wikipedia.org/wiki/Motion_control)
Servo mechanisms are automated control systems used in everything from
CNC machines, robotics, factory automation and more. Servo systems offer
greater reliability and precision as they use position feedback to account for
errors and system disturbances unlike open loop systems.

4. ABOUT SERVO & MOTION
CONTROL AUTOMATION
Servo drives offer a wide range of advantages for automatic machining systems, including
superior positioning, speed, and motion control.
Servos are able to account for expected errors through a feedback monitoring device that
leverages negative feedback to send a signal back to the controller.
In motion controls, the feedback device evaluates the relation of the control input to the actual
position of the mechanism or control shaft.
By understanding the relationship between the actual value and “wanted value” of the shaft’s
position, the controller is able to send a signal to the drive for corrective action in the motor.
(Source: https://www.a-m-c.com/)

5. MESSUNG SERVO & MOTION
CONTROL AUTOMATION
Messung delivers fully integrated, future-oriented servo & motion
control solutions incorporating programmable logic controllers,
motion control systems, drive products, HMIs and much more – to
bring flexibility, consistency and long-term availability for factory
automation.
Messung's association with Sigmatek, Austria and Fuji Electric,
Japan bring added value to their sophisticated solutions.
Modern machines and systems require innovative drive technology
with maximum flexibility and precision. Messung provides motion
control and VFD automation that is fully integrated into the
control system.
Control, drives, motor output stages, motors and software interact
perfectly and enable highly dynamic and exact motion sequences
from one source.

6. MESSUNG SERVO & MOTION
CONTROL AUTOMATION
This modern control structure is made possible through Sigmatek's real-time Ethernet system VARAN
with the shortest cycle times, and LASAL MOTION that provides all drive functions needed for a
production machine, from simple one-axis to complex multi-axis applications.
Object oriented programming makes Lasal Software versatile and re-usable. Advantages of object
oriented programming such as Encapsulation, Abstraction, Inheritance and Polymorphism are
included.
A large library with predefined modules is available to the user, besides functions such as absolute,
relative and endless positioning, CNC functions as well as co-ordinated movements and several
reference types.
In addition, technology modules for synchronization of up to 9 axis in a space, circular interpolation,
flying saw, cam discs, cam switches, jerk limited motion profiles or dynamic Safety zone monitoring
are also available. This ensures a significant reduction in programming and testing.

7. Robotics and Handling Systems
Modularly constructed machine and system designed concepts for
designing Handling Systems, Assembly Machines and Robots.
Our system toolkit consists of high-performance single/multi-CPU
solutions, innovative HMIs including wireless panels, fast and super
compact I/Os, dynamic drive technology for multi-axis applications &
Safety.
The “Engineering Tool” provides integrated software for PLC,
Robotics, Motion Control, Safety and Remote Maintenance to be
programmed & integrated all at one platform.
The real-time hi-speed special “Ethernet Bus” handles the fast system
communication required.
Integration of PLC, Robotics and Motion control in a central control
platform, with smart remote maintenance options via Web Server,
VNC Client and Server, OPC Server and Remote Manager.
Our IEC 61131-3 standard library offers right function modules for
any complex application requirement like Synchronous Feed, Pick &
Place, Gluing, Assembly, Testing and Palletising.
SERVING DIVERSE VERTICALS

8. SERVING DIVERSE VERTICALS
Plastic Technology
From Extrusion and Blow Molding technology to Injection Molding, we
deliver a high-performance and modular automation system with
long-term availability of the components.
Customer-specific hardware and software adaptation is possible;
servo drive technology and safety is seamlessly integrated. Handling
devices and Robots can be fully integrated into the control platform.
The “Engineering Tool” provides tested software and technology
modules that form the basis for a customer-specific design of the
application software.
Besides the Standard Hardware, we also offer Special Modules
ranging from Customised Operating Devices to Process-optimised I/O
Modules such as for Temperature Recording with Signal Processing,
Modules for connecting potentiometers and Ultrasound Distance
measuring systems & Modules for recording Energy use.
Whether for Hydraulic, Hybrid or fully Electrical machines (vertical and
horizontal), Blow Forming machines, one and two Auger Extruders or
complex multi-component systems – we provide a tailor-made and
economical complete solution.

9. Packaging and Food Industry
High-performance, flexible automation is crucial
in the Food & Packaging industry. The demands
on Machines and Equipment are continuously
increasing.
Continuous changes demanded by customer
vary from product to product requiring the
control system to adapt flexibly to format
changes for e.g. when lot sizes change from
small to large.
Thanks to the open system architecture, you
can easily include automated production
systems and automatic packaging systems
in production lines. Vision systems, robots and
Pick & Place units can be seamlessly integrated.
Secondary packaging, vertical & horizontal
FFS packaging, cartoning machine, fillers,
cappers, shrink wrap, palletizers and
robotics, blister packaging, primary
packaging - all such machines and processes
can benefit from Messung automation solutions.
SERVING DIVERSE VERTICALS

10. Printing and Paper
Reel-fed offset, Folding, Fold Gluing, Cutting and
Punching, Enveloping and Packaging… In printing
machines and equipment used for paper processing,
our modular automation systems with scalable
hardware and software, significantly increase the
flexibility and productivity of your machines while
reducing idle and set-up times as well as wasting of
paper.
Fast real-time “Ethernet Bus” is ideal for use in the
printing and paper industry. It provides perfect system
communication in hard real-time.
The all-in-one “Engineering Tool” based on IEC 61131-
3 integrates control and Safety programming,
Visualisation and Motion Control with multiple axes.
Preprogrammed software modules and industry-
specific Motion Control, as well as technology modules
from Positioning to electronic Cams to Print Mark
control simplify the development of applications.
SERVING DIVERSE VERTICALS

11. Machine Tools for Cutting
and Forming
Complete solutions for the diverse tasks in metal machine
manufacturing: Metal presses, Bending machines, Coil
processing, Cutting and Grinding machines, Folding machines or
Punching and Welding machines – including Robotics, Band-
straightening machines and Transfer systems.
With increasing format and form versatility as well as highly
varying lot sizes, flexibility is essential, so that productivity
increases and “idle-time” and changeover times are minimised.
For the demanding regulation processes in metal manufacturing,
precision is essential – whether temperature, pressure, position,
distance or height regulating.
Our solution is based on standard components, which contain
highly modern technology and guarantee higher accuracy,
stability and repeatability in performance, with improved quality
for your machines and equipment.
SERVING DIVERSE VERTICALS

12. Textile Machinery
Our system toolkit consists of high-performance single
or multi-CPU solutions, fast and super compact I/Os
including Safety. In the textile machines, several axes
are normally in use.
Our drive technology is fully integrated. Our compact
and modular multi-axis drive systems also find space
in small control cabinets and are optimal for highly
dynamic axis control in textile machines.
With an integrated complete solution, you profit from
few interfaces, short development times and only one
contact partner for all automation tasks.
Our solution is based on standard components, which
contain highly modern technology and guarantee
higher performance, efficiency and improved quality of
your machines and equipment. Idle times and rejects
are minimised.
SERVING DIVERSE VERTICALS

13. Energy
Messung provides highly modern control technology for the
generation, distribution and conversion of alternative energy.
The right automation components can be selected from our
modular system toolkit. For special requirements, our many
years of know-how allow us to implement customer-specific
complete solutions within the shortest time.
The high performance automation system enables the control
and networking of distributed, decentralized energy generation
and conversion systems, including efficient energy
management.
A simple to handle “Engineering Tool” helps to reduce
development costs and implement applications faster.
Integration with primary networks via common interface
connections such as our high-speed “Ethernet Interface”
enable remote maintenance and operation via Cloud/IOT, on
Tablets and Smart Phones.
SERVING DIVERSE VERTICALS

14. MESSUNG'S AUTOMATION
EXPERTISE MAKES THE DIFFERENCE
Automation is a continuously evolving field. As operational needs and
environmental considerations get more demanding; as IIot and Industry 4.0
keep developing; as machine builders and engineers strive to make these
systems faster and more efficient - motion control systems will keep
evolving.
For customers adopting these new technologies, it pays to go with an
automation specialist who has the engineering expertise, domain knowledge
and innovative passion to 'de-code' the technology and deliver the most
relevant, future-ready and cost-effective solution.

15. ABOUT MESSUNG INDUSTRIAL
AUTOMATION & CONTROL
Messung is the pioneer of the PLC, and leading provider of
industrial automation & control solutions in India.
Four decades of experience in the industry and history of
continuous innovation, global partnerships and pro-active R&D,
makes Messung the ideal industrial automation system
integrator to partner with for automation and control
solutions.
Whether automating a singular machine or a complete factory line,
Messung provides the optimal, IIoT-enabled solution with reduced
development time and cost - to transform performance, safety and
efficiencies on the shop floor.
At the forefront of the factory automation and controls
industry for forty years, Messung can understand your
requirements and create tailored solutions to help you meet your
'smart factory' goals, ensuring operational objectives of accuracy,
repeatability and stability.
Messung also provides comprehensive support in implementing
their smart factory automation and control concepts, backed
by training or responsive trouble-shooting, if required.

16. +91 20 66492800 | +91 22 28355066
www.messungautomation.co.in
Connect with us
DISCLAIMER :
This document is intended for presentation purpose only. It contains information that is strictly confidential. You are notified that any use, dissemination,
distribution or copying of its images, concepts and content of any slide, is prohibited.
MESSUNG SYSTEMS PVT. LTD. Pune (HO)
501, 502 & 503 Lunkad Sky Vista, Viman Nagar, Pune, India - 411 014