Frame mounting 2
•
0 likes•14 views
This document appears to be an engineering drawing containing dimensions, tolerances, and notes for a frame mounting assembly. Key information includes dimensions ranging from 10 to 120 inches, tolerances specified as fractional or angular, a title block identifying the part and other metadata, and a proprietary notice restricting reproduction of the drawing without permission.
Report
Share
Report
Share
Download to read offline
Recommended
Frame mounting
This document appears to be an engineering drawing containing dimensions, part numbers, and annotations for a frame mounting assembly. Key details include dimensions ranging from 2 to 120, part numbers for various fasteners and components, labeling of different views, a title block with basic part information, and notes specifying tolerances and proprietary ownership of the design.
Reverse Engineering Project - Kaitlyn Wiseman
The document contains engineering drawings and specifications for the components of a retractable pen. It includes 8 pages detailing the individual parts including a cartridge, tip, case tip, case body, push cap, push, and spring. Each component is assigned a number and includes measurements and tolerances for manufacturing.
Lightfoot Frame.PDF
The document contains technical drawings and specifications for a Lightfoot Frame assembly. It includes dimensions, tolerances, materials, and notes indicating the drawings are proprietary and confidential information for a specific company. The drawings span 4 sheets showing views of the assembly at different scales with labeled dimensions and references.
Airplane150drawing2.PDF
The document contains 3 pages of technical drawings for an aircraft, including dimensions and specifications. It includes front, side, and top view technical drawings signed and dated by the drafter J. Mok. The drawings provide details on the aircraft structure, engine, doors, windows, and other design elements.
Bracket-End-of-Stations Drawing.PDF
This document contains a technical drawing with dimensions and annotations for a bracket end-of-stations part. The drawing includes views, dimensions, tolerances, title block information, and a proprietary notice. Key details include dimensions for holes, lengths, angles, and a note that the scale is 1:2 unless otherwise specified.
robot drawing.PDF
This document appears to be an engineering drawing containing dimensions, tolerances, and notes for a part. It includes measurements in inches, abbreviations for tolerances and dimensions, and a title block with company name, part number, date, and approval information. The drawing contains proprietary information for a part called ROBOT22.
Miata radiator assy
Original radiator design to accommodate a change in the coolant routing in the engine. This design also allowed the engine to be over cooled, thereby allowing the use of water restrictors and tape on the grill to calibrate energy transfer rates for given atmospheric conditions.
Frame_2_1_Drawing.PDF
This document contains technical specifications for a frame including dimensions, tolerances, title, and a note indicating the drawing is proprietary and confidential information for a company. It lists various measurements in inches as well as labels for parts of the frame and revision details. The document provides the schematic for a frame design.
Recommended
Frame mounting
This document appears to be an engineering drawing containing dimensions, part numbers, and annotations for a frame mounting assembly. Key details include dimensions ranging from 2 to 120, part numbers for various fasteners and components, labeling of different views, a title block with basic part information, and notes specifying tolerances and proprietary ownership of the design.
Reverse Engineering Project - Kaitlyn Wiseman
The document contains engineering drawings and specifications for the components of a retractable pen. It includes 8 pages detailing the individual parts including a cartridge, tip, case tip, case body, push cap, push, and spring. Each component is assigned a number and includes measurements and tolerances for manufacturing.
Lightfoot Frame.PDF
The document contains technical drawings and specifications for a Lightfoot Frame assembly. It includes dimensions, tolerances, materials, and notes indicating the drawings are proprietary and confidential information for a specific company. The drawings span 4 sheets showing views of the assembly at different scales with labeled dimensions and references.
Airplane150drawing2.PDF
The document contains 3 pages of technical drawings for an aircraft, including dimensions and specifications. It includes front, side, and top view technical drawings signed and dated by the drafter J. Mok. The drawings provide details on the aircraft structure, engine, doors, windows, and other design elements.
Bracket-End-of-Stations Drawing.PDF
This document contains a technical drawing with dimensions and annotations for a bracket end-of-stations part. The drawing includes views, dimensions, tolerances, title block information, and a proprietary notice. Key details include dimensions for holes, lengths, angles, and a note that the scale is 1:2 unless otherwise specified.
robot drawing.PDF
This document appears to be an engineering drawing containing dimensions, tolerances, and notes for a part. It includes measurements in inches, abbreviations for tolerances and dimensions, and a title block with company name, part number, date, and approval information. The drawing contains proprietary information for a part called ROBOT22.
Miata radiator assy
Original radiator design to accommodate a change in the coolant routing in the engine. This design also allowed the engine to be over cooled, thereby allowing the use of water restrictors and tape on the grill to calibrate energy transfer rates for given atmospheric conditions.
Frame_2_1_Drawing.PDF
This document contains technical specifications for a frame including dimensions, tolerances, title, and a note indicating the drawing is proprietary and confidential information for a company. It lists various measurements in inches as well as labels for parts of the frame and revision details. The document provides the schematic for a frame design.
Flood Wall Design Proposal
The document is a set of engineering drawings from Precision Metal Fabricators Inc. detailing the design of a metal structure. It includes 7 pages showing dimensions, tolerances, materials, and individual components of the structure such as frames, connectors, brackets, support bars, and a wall/footer component. The drawings provide specifications for fabricating the parts to assemble the overall metal structure.
ACHANG #2.PDF
The document contains a technical drawing with multiple dimensions, views, notes, and specifications. It includes views, dimensions, tolerances, materials, and other annotations to fully describe a part or assembly. The proprietary drawing also contains watermarks and labels to identify the source and protect intellectual property.
BLK WOLF.PDF
This document is an engineering drawing for an aluminum alloy rim for a BMW 320i. It includes dimensions for a 120mm diameter pitch with M14 x 1.25 bolts and loose counterbores. It also notes the material, scale, and other production details.
Magnetic Knife Strip
Magnetic Knife Strip design for a secure, aesthetic concept that does not utilize potentially damaging metals.
GagonAssem.PDF
This document contains details for a roof panel assembly including the profile dimensions of 50x50x2.5mm, a list of numbers and letters that are likely references for the different roof panel components, manufacturing and approval information, and notes specifying that dimensions are in millimeters and contact information for a treasurer named Yosi.
Miata water outlet
This document contains a technical drawing for a water outlet part with specifications including dimensions, tolerances, notes and labels. Key details include a 1/8" NPT bung and tapped hole, a 1.25" diameter aluminum tube at a 24 degree angle, and dimensions for two mounting locations. The part is identified as for a Miata water outlet application.
Miata alternator pulley
The MIata required a larger diameter pulley in order to reduce the speed of the alternator relative to the crankshaft. With the engine operating at higher rpms for most of the on track time, we did not want to over charge the electrical system.
School Projects
The document is an engineering drawing that includes a bill of materials for a caster assembly. The drawing lists 7 parts including a top plate, axle support, wheel, axle, screws, washers, and nuts. It also specifies the total mass of 3150.11 grams and provides dimensions, tolerances, and other design information for the caster assembly.
Technical data SCHMIDT & BENDER MSR Riflescopes Reticles Subtensions | Optics...
This 3 page document is a reticle data sheet from Schmidt & Bender GmbH & Co. KG for a 5-25x56 focal plane scope. It provides information on the different markings and their meanings in centimeters/100m, inches/100yd, and mrad at the lowest and highest magnifications. The data sheet also lists the scope model number, type, and other specifications.
Technical data SCHMIDT & BENDER P4L Fine Riflescopes Reticles Subtensions | O...
This 3 page document is a data sheet from Schmidt & Bender GmbH & Co. KG providing information about a reticle for a 5-25x56 PMII/LP scope. It lists the manufacturer and contact information, includes disclaimers about copyright and permission, and provides technical specifications such as magnification levels, objective lens details, and measurement conversions for different units of angle, distance, and field of view.
Technical data SCHMIDT & BENDER H2CMR Riflescopes Reticles Subtensions | Opti...
This 3-page document is a reticle data sheet from Schmidt & Bender GmbH & Co. KG for their 5-25x56 PM II riflescope. It provides information on the different units of measurement for the reticle including centimeters/100m, inches/100yd, and mrad. It also lists the units A through J on the reticle and specifies the field of view at the lowest and highest magnifications.
Technical data SCHMIDT & BENDER P4L Riflescopes Reticles Subtensions | Optics...
This 3-page document is a reticle data sheet from Schmidt & Bender GmbH & Co. KG for a 5-25x56 PMII-2/LP riflescope. It provides information on the scope model number, focal plane, type, and coverages in cm/100m, in/100yd, and mrad at various magnifications. The final section lists the field of view specifications at the lowest and highest magnifications.
BracketDraw - Sheet1
The document is an engineering drawing for a board bracket. It includes two detail views at scales of 2:1 with dimensional measurements. The material is specified as 5025 aluminum with a #4 satin/annodized finish. The drawing is proprietary and confidential property of the company noted.
01COA-Presa-p4.PDF
The document appears to be an engineering drawing containing dimensions, tolerances, and notes for a mechanical part. Key details include dimensions for holes, through holes, and surfaces ranging from 10mm to 100mm. Notes specify material as 1.0036 steel, surface finish, tolerances, and other processing details. The drawing also contains title block information like the designer's name, date, part number, and scale.
BigTable.PDF
This document contains technical drawings with dimensions and annotations. It includes details like part profiles, angles, numbers, labels, and notes. The drawings have information for manufacturing a part including dimensions, a scale, sheets for a drawing number, a weight, and notes about deburring corners.
Technical data SCHMIDT & BENDER P3L (Mil-Dot) Riflescopes Reticles Subtension...
This 3-page document is a reticle data sheet from Schmidt & Bender GmbH & Co. KG for a 5-25x56 PMII/LP scope. It provides information on the focal plane, scope type, magnification levels, coverage units, and fields of view at the lowest and highest magnifications. The document contains notices that all rights are reserved and reproduction requires written permission.
72715-A1
This document is an engineering drawing of a rear drive axle assembly for a vehicle. It contains a parts list that includes the rear axle, axle spacers, dowel pins, saddle plates, bolts, nuts, washers, stabilizer links, locators, and brake fittings. Dimensions and tolerances are provided, along with title block information about the drawing number, scale, material, and manufacturer.
Bull Gear Sprt Struct Sect View.PDF
This document contains technical specifications and dimensions for a steel structure including:
- Dimensions in inches for various steel components including I-beams, angles, pads, and lifting eyes
- Notes that any phantom lined structure is not to be ripped out unless otherwise noted
- Labels for next assembly application and drawings of steel brackets for a drive gear
Latihan
The document discusses cubic numbers, which are numbers that are the result of multiplying a positive integer by itself three times. It provides examples of cubic numbers from 1 to 10, their formulas, and the resulting values. It also includes an algorithm for printing the cubic numbers from 1 to 10.
Codigos de colores para html
The document lists HTML color codes in both hexadecimal and RGB formats for basic and gradient colors. It provides the hexadecimal codes, RGB values, and color names for over 100 colors ranging from pure red, green, blue to various shades created by combining the primary colors. The color codes can be used to specify and control the colors of text, backgrounds, and other elements when writing HTML or CSS.
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
More Related Content
What's hot
Flood Wall Design Proposal
The document is a set of engineering drawings from Precision Metal Fabricators Inc. detailing the design of a metal structure. It includes 7 pages showing dimensions, tolerances, materials, and individual components of the structure such as frames, connectors, brackets, support bars, and a wall/footer component. The drawings provide specifications for fabricating the parts to assemble the overall metal structure.
ACHANG #2.PDF
The document contains a technical drawing with multiple dimensions, views, notes, and specifications. It includes views, dimensions, tolerances, materials, and other annotations to fully describe a part or assembly. The proprietary drawing also contains watermarks and labels to identify the source and protect intellectual property.
BLK WOLF.PDF
This document is an engineering drawing for an aluminum alloy rim for a BMW 320i. It includes dimensions for a 120mm diameter pitch with M14 x 1.25 bolts and loose counterbores. It also notes the material, scale, and other production details.
Magnetic Knife Strip
Magnetic Knife Strip design for a secure, aesthetic concept that does not utilize potentially damaging metals.
GagonAssem.PDF
This document contains details for a roof panel assembly including the profile dimensions of 50x50x2.5mm, a list of numbers and letters that are likely references for the different roof panel components, manufacturing and approval information, and notes specifying that dimensions are in millimeters and contact information for a treasurer named Yosi.
Miata water outlet
This document contains a technical drawing for a water outlet part with specifications including dimensions, tolerances, notes and labels. Key details include a 1/8" NPT bung and tapped hole, a 1.25" diameter aluminum tube at a 24 degree angle, and dimensions for two mounting locations. The part is identified as for a Miata water outlet application.
Miata alternator pulley
The MIata required a larger diameter pulley in order to reduce the speed of the alternator relative to the crankshaft. With the engine operating at higher rpms for most of the on track time, we did not want to over charge the electrical system.
School Projects
The document is an engineering drawing that includes a bill of materials for a caster assembly. The drawing lists 7 parts including a top plate, axle support, wheel, axle, screws, washers, and nuts. It also specifies the total mass of 3150.11 grams and provides dimensions, tolerances, and other design information for the caster assembly.
Technical data SCHMIDT & BENDER MSR Riflescopes Reticles Subtensions | Optics...
This 3 page document is a reticle data sheet from Schmidt & Bender GmbH & Co. KG for a 5-25x56 focal plane scope. It provides information on the different markings and their meanings in centimeters/100m, inches/100yd, and mrad at the lowest and highest magnifications. The data sheet also lists the scope model number, type, and other specifications.
Technical data SCHMIDT & BENDER P4L Fine Riflescopes Reticles Subtensions | O...
This 3 page document is a data sheet from Schmidt & Bender GmbH & Co. KG providing information about a reticle for a 5-25x56 PMII/LP scope. It lists the manufacturer and contact information, includes disclaimers about copyright and permission, and provides technical specifications such as magnification levels, objective lens details, and measurement conversions for different units of angle, distance, and field of view.
Technical data SCHMIDT & BENDER H2CMR Riflescopes Reticles Subtensions | Opti...
This 3-page document is a reticle data sheet from Schmidt & Bender GmbH & Co. KG for their 5-25x56 PM II riflescope. It provides information on the different units of measurement for the reticle including centimeters/100m, inches/100yd, and mrad. It also lists the units A through J on the reticle and specifies the field of view at the lowest and highest magnifications.
Technical data SCHMIDT & BENDER P4L Riflescopes Reticles Subtensions | Optics...
This 3-page document is a reticle data sheet from Schmidt & Bender GmbH & Co. KG for a 5-25x56 PMII-2/LP riflescope. It provides information on the scope model number, focal plane, type, and coverages in cm/100m, in/100yd, and mrad at various magnifications. The final section lists the field of view specifications at the lowest and highest magnifications.
BracketDraw - Sheet1
The document is an engineering drawing for a board bracket. It includes two detail views at scales of 2:1 with dimensional measurements. The material is specified as 5025 aluminum with a #4 satin/annodized finish. The drawing is proprietary and confidential property of the company noted.
01COA-Presa-p4.PDF
The document appears to be an engineering drawing containing dimensions, tolerances, and notes for a mechanical part. Key details include dimensions for holes, through holes, and surfaces ranging from 10mm to 100mm. Notes specify material as 1.0036 steel, surface finish, tolerances, and other processing details. The drawing also contains title block information like the designer's name, date, part number, and scale.
BigTable.PDF
This document contains technical drawings with dimensions and annotations. It includes details like part profiles, angles, numbers, labels, and notes. The drawings have information for manufacturing a part including dimensions, a scale, sheets for a drawing number, a weight, and notes about deburring corners.
Technical data SCHMIDT & BENDER P3L (Mil-Dot) Riflescopes Reticles Subtension...
This 3-page document is a reticle data sheet from Schmidt & Bender GmbH & Co. KG for a 5-25x56 PMII/LP scope. It provides information on the focal plane, scope type, magnification levels, coverage units, and fields of view at the lowest and highest magnifications. The document contains notices that all rights are reserved and reproduction requires written permission.
72715-A1
This document is an engineering drawing of a rear drive axle assembly for a vehicle. It contains a parts list that includes the rear axle, axle spacers, dowel pins, saddle plates, bolts, nuts, washers, stabilizer links, locators, and brake fittings. Dimensions and tolerances are provided, along with title block information about the drawing number, scale, material, and manufacturer.
Bull Gear Sprt Struct Sect View.PDF
This document contains technical specifications and dimensions for a steel structure including:
- Dimensions in inches for various steel components including I-beams, angles, pads, and lifting eyes
- Notes that any phantom lined structure is not to be ripped out unless otherwise noted
- Labels for next assembly application and drawings of steel brackets for a drive gear
Latihan
The document discusses cubic numbers, which are numbers that are the result of multiplying a positive integer by itself three times. It provides examples of cubic numbers from 1 to 10, their formulas, and the resulting values. It also includes an algorithm for printing the cubic numbers from 1 to 10.
Codigos de colores para html
The document lists HTML color codes in both hexadecimal and RGB formats for basic and gradient colors. It provides the hexadecimal codes, RGB values, and color names for over 100 colors ranging from pure red, green, blue to various shades created by combining the primary colors. The color codes can be used to specify and control the colors of text, backgrounds, and other elements when writing HTML or CSS.
What's hot (20)
Technical data SCHMIDT & BENDER MSR Riflescopes Reticles Subtensions | Optics...
Technical data SCHMIDT & BENDER MSR Riflescopes Reticles Subtensions | Optics...
Technical data SCHMIDT & BENDER P4L Fine Riflescopes Reticles Subtensions | O...
Technical data SCHMIDT & BENDER P4L Fine Riflescopes Reticles Subtensions | O...
Technical data SCHMIDT & BENDER H2CMR Riflescopes Reticles Subtensions | Opti...
Technical data SCHMIDT & BENDER H2CMR Riflescopes Reticles Subtensions | Opti...
Technical data SCHMIDT & BENDER P4L Riflescopes Reticles Subtensions | Optics...
Technical data SCHMIDT & BENDER P4L Riflescopes Reticles Subtensions | Optics...
Technical data SCHMIDT & BENDER P3L (Mil-Dot) Riflescopes Reticles Subtension...
Technical data SCHMIDT & BENDER P3L (Mil-Dot) Riflescopes Reticles Subtension...
Recently uploaded
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
Software Engineering and Project Management - Introduction, Modeling Concepts...
Introduction, Modeling Concepts and Class Modeling: What is Object orientation? What is OO development? OO Themes; Evidence for usefulness of OO development; OO modeling history. Modeling
as Design technique: Modeling, abstraction, The Three models. Class Modeling: Object and Class Concept, Link and associations concepts, Generalization and Inheritance, A sample class model, Navigation of class models, and UML diagrams
Building the Analysis Models: Requirement Analysis, Analysis Model Approaches, Data modeling Concepts, Object Oriented Analysis, Scenario-Based Modeling, Flow-Oriented Modeling, class Based Modeling, Creating a Behavioral Model.
An improved modulation technique suitable for a three level flying capacitor ...
This research paper introduces an innovative modulation technique for controlling a 3-level flying capacitor multilevel inverter (FCMLI), aiming to streamline the modulation process in contrast to conventional methods. The proposed
simplified modulation technique paves the way for more straightforward and
efficient control of multilevel inverters, enabling their widespread adoption and
integration into modern power electronic systems. Through the amalgamation of
sinusoidal pulse width modulation (SPWM) with a high-frequency square wave
pulse, this controlling technique attains energy equilibrium across the coupling
capacitor. The modulation scheme incorporates a simplified switching pattern
and a decreased count of voltage references, thereby simplifying the control
algorithm.
一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
CalArts毕业证学历书【微信95270640】CalArts毕业证’圣力嘉学院毕业证《Q微信95270640》办理CalArts毕业证√文凭学历制作{CalArts文凭}购买学历学位证书本科硕士,CalArts毕业证学历学位证【实体公司】办毕业证、成绩单、学历认证、学位证、文凭认证、办留信网认证、（网上可查，实体公司，专业可靠）
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理加利福尼亚艺术学院加利福尼亚艺术学院毕业证文凭证书流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！子小伍玩小伍比山娃小一岁虎头虎脑的很霸气父亲让山娃跟小伍去夏令营听课山娃很高兴夏令营就设在附近一所小学山娃发现那所小学比自己的学校更大更美操场上还铺有塑胶跑道呢里面很多小朋友一班一班的快快乐乐原来城里娃都藏这儿来了怪不得平时见不到他们山娃恍然大悟起来吹拉弹唱琴棋书画山娃都不懂却什么都想学山娃怨自己太笨什么都不会斟酌再三山娃终于选定了学美术当听说每月要交元时父亲犹豫了山娃也说爸算了吧咱学校一学期才转
Data Driven Maintenance | UReason Webinar
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Recently uploaded (20)
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Software Engineering and Project Management - Introduction, Modeling Concepts...
Software Engineering and Project Management - Introduction, Modeling Concepts...
Data Control Language.pptx Data Control Language.pptx
Data Control Language.pptx Data Control Language.pptx
An improved modulation technique suitable for a three level flying capacitor ...
An improved modulation technique suitable for a three level flying capacitor ...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Frame mounting 2
- 1. 10 36 60 84 110 2X 12 10 2X 6.358.10 2X 5 THRU 120 36 844 10 10 20 A A B B 2 2 1 1 DO NOT SCALE DRAWING Frame Mounting2 SHEET 1 OF 1 UNLESS OTHERWISE SPECIFIED: SCALE: 1:1 WEIGHT: REVDWG. NO. A SIZE TITLE: NAME DATE COMMENTS: Q.A. MFG APPR. ENG APPR. CHECKED DRAWN FINISH MATERIAL INTERPRET GEOMETRIC TOLERANCING PER: DIMENSIONS ARE IN INCHES TOLERANCES: FRACTIONAL ANGULAR: MACH BEND TWO PLACE DECIMAL THREE PLACE DECIMAL APPLICATION USED ONNEXT ASSY PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF <INSERT COMPANY NAME HERE>. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF <INSERT COMPANY NAME HERE> IS PROHIBITED.