Epcon Industrial Systems specializes in custom designing and manufacturing of Air Pollution Control Systems, Process Heating Equipment, Advanced Heat Recovery, Thermal Cleaning & Finishing Systems. Our Patented Technology is found across Industries and Applications all over the World. Check this link for details
Yokogawa, globally recognized leader in a number of process control fields, has authored an e-book which provides useful insight into how operators of combustion based equipment and systems can improve efficiency and enhance safety by employing modern technology.
The effect of Al2O3 nanoparticles on the performance of heat pump to improve its
operational efficiency was presented in this theoretical and experimental study. In the
experimental work the heat pump charged with R600a inclusive with 0.06 % vol. of
Al2O3 and used as a nanorefrigerant. Three different nanoparticles size 20nm, 40 nm
and 50 nm of Al2O3 have been used for the preparation of nanolubricant in the present
study. The theoretical approach includes simulations modeling the heat pump
components such as compressor, evaporator, condenser and an expansion valve by
computer of the heat pump system by using commercial MATLAB. The results showed
that the addition of nanoparticles to the refrigerant will improve its characteristics of
refrigeration system heat transfer and thermal properties. Also, it showed that the
using nanorefrigerant in refrigeration system will work normally at all conditions
employed in this work. The experimental results found that the heat pump coefficient
of performance increased by 19.1%, but the power consumption reduced by 21.8 %
when using a mineral oil with 20 nm nanoparticles size of Al2O3 instead of the
conventional mineral oil only. Finally, the refrigeration effect increased and work of
compressor decreased by using a small nanoparticles size of Al2O3
Yokogawa, globally recognized leader in a number of process control fields, has authored an e-book which provides useful insight into how operators of combustion based equipment and systems can improve efficiency and enhance safety by employing modern technology.
The effect of Al2O3 nanoparticles on the performance of heat pump to improve its
operational efficiency was presented in this theoretical and experimental study. In the
experimental work the heat pump charged with R600a inclusive with 0.06 % vol. of
Al2O3 and used as a nanorefrigerant. Three different nanoparticles size 20nm, 40 nm
and 50 nm of Al2O3 have been used for the preparation of nanolubricant in the present
study. The theoretical approach includes simulations modeling the heat pump
components such as compressor, evaporator, condenser and an expansion valve by
computer of the heat pump system by using commercial MATLAB. The results showed
that the addition of nanoparticles to the refrigerant will improve its characteristics of
refrigeration system heat transfer and thermal properties. Also, it showed that the
using nanorefrigerant in refrigeration system will work normally at all conditions
employed in this work. The experimental results found that the heat pump coefficient
of performance increased by 19.1%, but the power consumption reduced by 21.8 %
when using a mineral oil with 20 nm nanoparticles size of Al2O3 instead of the
conventional mineral oil only. Finally, the refrigeration effect increased and work of
compressor decreased by using a small nanoparticles size of Al2O3
Invisible Forces: Innovative Uses of Gas Analysis in Cold Storage, Ripening a...CID Bio-Science
Managing atmospheric gases plays a critical role in the development of harvested fruit in ripening, storage and packaging, while progressive strategies in this area add value, enhance market access and reduce losses. Join us for our upcoming webinar - “Invisible Forces: Innovative Uses of Gas Analysis in Cold Storage, Ripening and Food Innovation” and discover how your organization can retain and deepen its post-harvest competitive advantage.
We will discuss:
- Methods for gas analysis: We will dive into the current methods for detecting oxygen, carbon dioxide and ethylene in harvested fruit (chromatography detection, electrochemical sensing and optical detection), the advantages and drawbacks of each, along with what the end-user should consider before working each tech into their operation.
- Real-world uses cases and best practices: How are storage and ripening operations using gas analysis now? We will showcase a number of ways our customers are using our gas analysis instruments in their operations.
- Cutting edge research: Gas analysis continues to be a relevant research topic in post-harvest. What is being studied and how can the commercial operation learn and use these insights?
- The future of gas analysis: What does the future hold for gas analysis and how can you ensure your organization stays on the leading edge?
Performance optimization of thermal systems in textile industriesIOSR Journals
Energy consumption has been growing very rapidly due to population growth, rapid urbanization
and industrial development. For future planning, it is important to know the current specific energy
consumption and the energy intensity in order to estimate future energy consumption. In the industrial sector
especially in textile units’ large amount of energy wasted due to improper working and lack of energy saving
measures. In this study, the various measures that causes the main energy losses are investigated .In the textile
dyeing sector, the main processes are associated with steam in various proportions. For the steam production,
steam boilers of different types are used for different applications. The efficiency of the boiler varies from one
industry to other based on various parameters such as quality of the water, fuel used, blow down quantity, etc.
Steam traps are also having influence on the boiler efficiency. In the case of steam leakage the performance of
the system decreases as the consumption of fuel increases to produce more steam. Thus by adopting various
recovery methods we can reduce the energy losses and fuel consumption.
BERG custom designs, engineers, and manufactures precision temperature control systems in collaboration with our customers to meet the unique needs of their applications.
Plasma Thermal Destruction and Recovery (PTDR) technology enables
100 per cent diversion of pharmaceutical waste, eliminating the need
for landfill and/or further processing and generating synthetic gas
to offset energy consumption.
Leading Global Supplier of Industrial Equipment - EpconLPEpconLP
With 45 years experience and over 4300 systems operating worldwide, Epcon is a leading global supplier across industries and applications. As a global pioneer in the process heating and air pollution control industry, Epcon has a reputation for not only highly quality manufacturing and engineering expertise, but also honesty and integrity.
Epcon has been engineering and manufacturing state-of-the art sustainable industrial solutions since 1977. We custom engineer our systems for optimal efficiency, and strive for next zero fuel consumption and emissions! Our returning customers are a testament to our success in providing quality systems and service.
Invisible Forces: Innovative Uses of Gas Analysis in Cold Storage, Ripening a...CID Bio-Science
Managing atmospheric gases plays a critical role in the development of harvested fruit in ripening, storage and packaging, while progressive strategies in this area add value, enhance market access and reduce losses. Join us for our upcoming webinar - “Invisible Forces: Innovative Uses of Gas Analysis in Cold Storage, Ripening and Food Innovation” and discover how your organization can retain and deepen its post-harvest competitive advantage.
We will discuss:
- Methods for gas analysis: We will dive into the current methods for detecting oxygen, carbon dioxide and ethylene in harvested fruit (chromatography detection, electrochemical sensing and optical detection), the advantages and drawbacks of each, along with what the end-user should consider before working each tech into their operation.
- Real-world uses cases and best practices: How are storage and ripening operations using gas analysis now? We will showcase a number of ways our customers are using our gas analysis instruments in their operations.
- Cutting edge research: Gas analysis continues to be a relevant research topic in post-harvest. What is being studied and how can the commercial operation learn and use these insights?
- The future of gas analysis: What does the future hold for gas analysis and how can you ensure your organization stays on the leading edge?
Performance optimization of thermal systems in textile industriesIOSR Journals
Energy consumption has been growing very rapidly due to population growth, rapid urbanization
and industrial development. For future planning, it is important to know the current specific energy
consumption and the energy intensity in order to estimate future energy consumption. In the industrial sector
especially in textile units’ large amount of energy wasted due to improper working and lack of energy saving
measures. In this study, the various measures that causes the main energy losses are investigated .In the textile
dyeing sector, the main processes are associated with steam in various proportions. For the steam production,
steam boilers of different types are used for different applications. The efficiency of the boiler varies from one
industry to other based on various parameters such as quality of the water, fuel used, blow down quantity, etc.
Steam traps are also having influence on the boiler efficiency. In the case of steam leakage the performance of
the system decreases as the consumption of fuel increases to produce more steam. Thus by adopting various
recovery methods we can reduce the energy losses and fuel consumption.
BERG custom designs, engineers, and manufactures precision temperature control systems in collaboration with our customers to meet the unique needs of their applications.
Plasma Thermal Destruction and Recovery (PTDR) technology enables
100 per cent diversion of pharmaceutical waste, eliminating the need
for landfill and/or further processing and generating synthetic gas
to offset energy consumption.
Leading Global Supplier of Industrial Equipment - EpconLPEpconLP
With 45 years experience and over 4300 systems operating worldwide, Epcon is a leading global supplier across industries and applications. As a global pioneer in the process heating and air pollution control industry, Epcon has a reputation for not only highly quality manufacturing and engineering expertise, but also honesty and integrity.
Epcon has been engineering and manufacturing state-of-the art sustainable industrial solutions since 1977. We custom engineer our systems for optimal efficiency, and strive for next zero fuel consumption and emissions! Our returning customers are a testament to our success in providing quality systems and service.
Epcon has been engineering and manufacturing state-of-the art sustainable industrial solutions since 1977. We custom engineer our systems for optimal efficiency, and strive for next zero fuel consumption and emissions! Our returning customers are a testament to our success in providing quality systems and service.
Founded in 1977, Epcon has grown from a one man-operation to a global leader in developing and manufacturing innovative air pollution control technology and industrial heating equipment. With over 4,300 systems worldwide, an extensive Research & Development process and many patented designs, Epcon prides itself on delivering comprehensive systems that perform for decades. No two system are alike; every industrial process and application is one-of-a-kind, and that is why we specialize in systems specifically engineered and handcrafted, tailored to each unique manufacturing process and its operational demands.
Air pollution is a global problem and Epcon is committed to solving the problem through expert engineering and design services. We offer numerous solutions for control of pollution products, suitable for various industrial needs. We can employ H2S Scrubbers, Recuperative Thermal Oxidizer, Regenerative Thermal Oxidizer (RTO) or Catalytic Oxidizer, depending on your requirements. Our Thermal Oxidizers can be built to handle any size volume of gas. Customers can count on Epcon to design air pollution control systems or any number of custom systems specific to your process.
Epcon is an industry leader in Direct Fired Thermal Oxidizer (DFTO) control equipment technology specializing in custom modular units for stand alone as well as trailer-mounted applications. Epcon is pleased to offer different purchase, lease, and rental agreement options to suit any need.
Direct Fired Thermal Oxidizers may also be called Afterburners or Direct Flame Thermal Oxidizers. Thermal oxidation is a method of air pollution control that can be applied to incineration for air polluted with small particles or combustible solids or liquids.
Direct Fired Thermal Oxidizers are ideal solutions for high solvent loading and fluctuating operating conditions.
Epcon’s Regenerative Thermal Oxidizer (RTO) systems have been successfully utilized on hundreds of industrial VOC air pollution control applications since 1977. Epcon has extensive RTO design and installation experience with VOCs (Volatile Organic Compounds), hydrocarbons, solvents, and HAPs (Hazardous Air Pollutants) as well as particulate-laden processes which generally require pre-filtration prior to the RTO system. Because no two applications are alike, we look forward to preparing a custom RTO proposal for your specific application.
Epcon’s proprietary Recuperative Thermal Oxidizers are fabricated from select Stainless Steel Alloys to meet the process and duty cycle requirements for a given project.
Visit us for details https://epconlp.com/products/air-pollution-control/recuperative-thermal-oxidizers
Mr. Aziz Jamaluddin, President and CEO of Epcon was asked to present at the 2019 Fall Refining and Equipment Standards Meeting, Atlanta, GA.
Epcon’s technical presentation was specific to Thermal Oxidizers and the various types, technology, challenges, principal design considerations, etc., and ultimately seeking owner/operators’ comments/opinions on operability/maintainability challenges, safety or other issues with regard to assessing the industry for an API Standard.
Epcon: Leading Industrial Manufacturer of Thermal Cleaning SolutionsEpconLP
Thermal cleaning solutions are proven to be cost effective and environmentally sound alternative to traditional industrial cleaning methods. Epcon has supplied thermal cleaning technology for a variety of components, systems and services for a broad range of products such and applications across different industries. https://epconlp.com/products/thermal-cleaning-solutions/
Epcon is proud to promote Family, with many multi-generations working side by side. This year we are thrilled to have our Founder’s Grandson join our manufacturing team, officially making 3 Generations working together. He’s an OSHA certified Class A – Welder and we are lucky to have him mastering the trade!
https://epconlp.com/
Epcon Industrial Systems - Protecting the Environment Through TechnologyEpcon Industrial Systems
Epcon Industrial Systems specializes in designing and manufacturing of pre-engineered and pre-tested Regenerative Thermal Oxidizers, Recuperative Thermal Oxidizers, Afterburners, Industrial Furnaces, Industrial Ovens and Specialty Finishing systems to fit your application process. We are the only company in our industry to manufactures both Thermal Oxidizers and Industrial Ovens in our onsite 250,000 Sq. Ft. modern shop. Nearly 4,000 unique systems have been designed and manufactured for our clients over the past 40 years. Let our team of engineers work with you to design and build the Air Pollution Control System or Industrial heat processing equipment that best meets your needs.
Epcon is One of the World's leading Manufacturing Companies. With over 4000 installations worldwide, EPCON has been pioneering new techniques since 1977 that have become industry standards now. Founded in 1977, Epcon has grown from a one man-operation to a global leader in developing and manufacturing innovative air pollution control technology and industrial heating equipment.
https://epconlp.com/
Epcon is One of the World's leading Manufacturing Companies. EpconLP
Providing Engineering Solutions that Benefit both the Environment and Industry.
Founded in 1977, Epcon has grown from a one man-operation to a global leader in developing and manufacturing innovative air pollution control technology and industrial heating equipment. Epcon prides itself on delivering comprehensive systems that perform for decades. No two system are alike; every industrial process and application is one-of-a-kind, and that is why we specialize in systems specifically engineered and handcrafted, tailored to each unique manufacturing process and its operational demands.
https://epconlp.com/
Epcon has been delivering quality Finishing Systems since 1977. Epcon has supplied custom technology, components, systems and services for cleaning, coating, and curing for a broad range of products, substrates and coatings across different industries around the globe.
https://epconlp.com/products/finishing-systems/
Epcon has been active in the 55 gallon steel drum manufacturing industry for 45+ year. This special proprietary system for dual laying and triple laying Wicket Ovens.
Epcon: Leading Industrial Manufacturer of Heat Recovery SystemsEpconLP
Epcon has been designing and manufacturing custom heat recovery methods since our founding since 1977. These consist of both combining process heating operations with air pollution control systems, as well as multistage heat recovery.
https://epconlp.com/
EPCON Industrial SystemsProviding Engineering Solutions that Benefit both th...EpconLP
Celebrating 45 years of service! Over 4300 systems delivered worldwide.
We specialize in custom designing and manufacturing:
Air Pollution Control Systems
Process Heating Equipment (Industrial Furnaces & Ovens)
Advanced Heat Recovery Systems
Thermal Cleaning Systems
Finishing Systems
For more details check here https://epconlp.com/
EPCON designs High Performance Systems for the Most Complex Industrial Applications. EPCON has been serving a wide range of Industries since its inception 45 years ago. Below are some of the industries we continue to supply with custom built systems.
https://epconlp.com/industries_served/
Epcon Industrial Systems specializes in the custom designing and manufacturing of Regenerative Thermal Oxidizers (RTOs), Recuperative Thermal Oxidizers, Catalytic Oxidizers, Direct Fired Oxidizers, Industrial Furnaces, Industrial Ovens and Specialty and Finishing Systems.
Epcon has been engineering and manufacturing state-of-the art Thermal Oxidizers since 1977.
Our returning customers are a testament to our success in providing innovative solutions around the globe.
Visit us for more information https://epconlp.com.
Leading Industrial Manufacturer of Integrated Systems and Solutions.
The integrated “Oven/Oxidizer Combination” design is one of Epcon’s engineering specialties, with several patented systems proven across multiple installations around the globe. During the oxidation process inclusion of heat recovery that recycles the heat to operate the process heating ovens and furnaces, equates to cost savings by minimizing operating fuel usage.
Visit Us https://epconlp.com/products/integrated-systems/
Similar to For Quality Industrial Solutions Choose Epcon (20)
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
1. For Quality
Industrial
Solutions
Choose Epcon
Epcon Industrial Systems
specializes in custom
designing and
manufacturing of Air
Pollution Control
Systems, Process
Heating Equipment,
Advanced Heat
Recovery, Thermal
Cleaning & Finishing
Systems. Our Patented
Technology is found
across Industries and
Applications all over the
World. Check this link
for details
https://epconlp.com/ .
2. About Epcon
Industrial Equipment
Founded in 1977, Epcon has grown from a one man-
operation to a global leader in developing and
manufacturing innovative air pollution control
technology and industrial heating equipment. With
over 4,300 systems worldwide, an extensive Research
& Development process and many patented designs,
Epcon prides itself on delivering comprehensive
systems that perform for decades. No two system are
alike; every industrial process and application is one-
of-a-kind, and that is why we specialize in systems
specifically engineered and handcrafted, tailored to
each unique manufacturing process and its
operational demands.
3. Protecting the
Environment
Through Technology.
Our team can provide a range of energy efficient solutions, with regulatory and testing
experience, to ensure optimal performance and air pollution control compliance.
Our commitment to providing environmentally sound solutions goes beyond our
technical expertise. We care about what we do to improve the quality of life for future
generations. We pledge to forge responsible, technological advances as a company
dedicated to a cleaner tomorrow.
• 100% Satisfaction Guarantee
• Quality Control Protocols
• After Sales Support
• Factory Acceptance Testing
• Customized Systems
• Experienced Professionals
• Unrivalled Workmanship
• Environmental Solutions
https://epconlp.com/products/
4. Leading Global Supplier
of Industrial Equipment
With 45 years experience and over 4300
systems operating worldwide, Epcon is a
leading global supplier across industries
and applications.
5. Air Pollution Control
Systems
Depending on your needs, Epcon can
utilize a range of air pollution control
solutions ranging from Direct Fired
Thermal Oxidizers (DFTO), Regenerative
Thermal Oxidizer (RTO), Recuperative
Thermal Oxidizer, and/or Catalytic
Oxidizer, paired with complementary
technologies such as a Scrubber.
https://epconlp.com/products/air-
pollution-control/
6. Direct Fired Thermal
Oxidizer
Epcon is an industry leader in Direct Fired Thermal Oxidizer
(DFTO) control equipment technology specializing in custom
modular units for stand alone as well as trailer-mounted
applications. Epcon is pleased to offer different purchase,
lease, and rental agreement options to suit any need.
Direct Fired Thermal Oxidizers may also be called
Afterburners or Direct Flame Thermal Oxidizers. Thermal
oxidation is a method of air pollution control that can be
applied to incineration for air polluted with small particles or
combustible solids or liquids.
Direct Fired Thermal Oxidizers are ideal solutions for high
solvent loading and fluctuating operating conditions.
https://epconlp.com/products/air-pollution-control/direct-
fired-thermal-oxidizers/
7. Regenerative Thermal
Oxidizer
Epcon Industrial Systems takes great pride in having excellent
engineering and manufacturing capability to design and
fabricate highly-efficient, high-quality and high-performance
Regenerative Thermal Oxidizers (RTO’s), which always meet or
exceeded our customer expectations.
Founded in 1977, Epcon Industrial Systems has completed
thousands of Oxidizer Systems around the world. Uniquely
designed to achieve maximum desired performance, each
system goes through exhaustive front-end and pre-
engineering analysis. Once completed, the design and
drafting process is started, followed up by the manufacturing
process.
https://epconlp.com/products/air-pollution-
control/regenerative-thermal-oxidizer-rto/
8. Recuperative Thermal
Oxidizer
Epcon is an industry leader in Thermal Oxidizer technology
specializing in the integration of customers’ process
heating operations together with their Thermal Oxidizer
requirements. In simple terms, a recuperative thermal
oxidizer is the evolution of the direct fired thermal oxidizer
through the addition of primary and/or secondary heat
recovery.
Addition of heat recovery to the oxidation process can
provide tremendous costs savings with respect to minimizing
the use of natural gas for the air pollution control application
as well as external process heat loads.
https://epconlp.com/products/air-pollution-
control/recuperative-thermal-oxidizers/
9. Thermal Catalytic
Oxidizer
Depending on the nature of the vent stream to be controlled,
addition of catalyst to a thermal oxidation system may be a means
to further optimize operating costs of the compliance strategy.
Epcon has successfully employed catalysts for Regenerative
Thermal Oxidizers (RTO), Recuperative Thermal
Oxidizers and Direct Fired Thermal Oxidizer configurations. Epcon
designs thermal catalytic oxidizer systems to accept various types
of catalysts. With our in-house catalyst experts, we can assure
optimal catalyst selection and application to various process
exhaust streams. Our experts work together with clients to
understand the specific application requirements and working with
global catalyst manufacturers match those requirements to the
most appropriate catalyst type and control technology
configuration.
https://epconlp.com/products/air-pollution-control/thermal-
catalytic-oxidizers/
10. Scrubber
A scrubber is a piece of air pollution control
equipment that removes harmful gases and particles
from industrial exhaust streams. A scrubber is a
versatile system and can be designed for both
particulate as well as gaseous pollution abatement,
and is able to handle high volumes, fluctuation in
pressure and process flows. Typically, a scrubber is
installed before the RTO system, and is often paired
with a quench system to decrease the process
temperatures and further neutralize the process
flows.
https://epconlp.com/products/air-pollution-
control/scrubber/
11. Process Heating
Equipment
Epcon has been engineering and manufacturing process heating
equipment since 1977. With experience across applications –
nothing is too complex, and no size is too big for us.
We have designed Batch and Automated Conveyorized Ovens and
Furnaces for many industries. From implementing pneumatic
guillotine doors, or car bottom carts, multi-tier high speed
conveyors and an infinite custom design features and
configurations to optimize your process. Additionally, we design
your ovens and furnaces with a variety of fuel sources from Natural
Gas, Liquid Natural Gas, Electric, Oil Fired, and Steam. Beyond this
we can implement heat recovery methods that allow for burnerless
or indirect heating systems. Simply give Epcon the concept and let
our engineering and design team take it from there.
https://epconlp.com/products/process-heating-equipment/
12. Integrated Systems
Since our founding in 1977, Epcon’s expertise has been in
custom integrated solutions. These consist of both combining
process heating operations with air pollution control systems,
as well as multistage heat recovery.
The integrated “Oven/Oxidizer Combination” design is one of
Epcon’s engineering specialties, with several patented
systems proven across multiple installations around the
globe. During the oxidation process inclusion of heat recovery
that recycles the heat to operate the process heating ovens
and furnaces, equates to cost savings by minimizing operating
fuel usage.
https://epconlp.com/products/integrated-systems/
13. Heat Recovery Systems
Epcon has been designing and manufacturing custom heat recovery methods
since our founding since 1977. These consist of both combining process heating
operations with air pollution control systems, as well as multistage heat
recovery.
The integrated “Oven/Oxidizer Combination” design with multistage heat
recovery though heat exchangers is what sets apart Epcon from other industrial
suppliers. With thousands of patented systems proven across multiple
installations around the globe, we have saved our customers millions in
operating cost.
We utilize various types of Heat Exchangers for transferring heat in the process,
making use of thermal energy which would otherwise be wasted. In systems
manufactured at Epcon, heat exchangers are used for pre-heating the process
gas as it enters the thermal oxidizer, also called primary heat exchanger. These
are typically in the form of regenerative and recuperative thermal oxidizers and
economizers. From there secondary heating systems, via thermal fluid heaters
such as waste heat hot water heaters and waste heat boilers, the thermal energy
is further recycled through the as for heating of the manufacturing facilities and
heating boilers.
https://epconlp.com/products/heat-recovery-systems/
14. Thermal Cleaning
Solutions
Thermal cleaning solutions are proven to be cost effective
and environmentally sound alternative to traditional
industrial cleaning methods. Epcon has supplied thermal
cleaning technology for a variety of components, systems and
services for a broad range of products such and applications
across different industries.
Epcon has developed a range of thermal cleaning technology
such as highly sensitive decommissioning systems for old
bombs and munitions for the US department of defense or
solutions for garments exposed to hazardous materials. These
systems promote healthy and safe solutions to hazardous
products that would otherwise end up in landfills or pose
dangers for generations to come.
https://epconlp.com/products/thermal-cleaning-solutions/
15. Finishing Systems
Epcon has been delivering quality Finishing Systems since
1977. Epcon has supplied custom technology, components,
systems and services for cleaning, coating, and curing for a
broad range of products, substrates and coatings across
different industries around the globe.
To date, Epcon has manufactured more than 4,300 industrial
systems. From small batch operations to large conveyorized
multistage paint finishing lines, Epcon has the design,
manufacturing and validation testing resources to meet and
exceed customer expectations at our 250,000 sq ft vertically
integrated manufacturing operations in The Woodlands, TX.
https://epconlp.com/products/finishing-systems/
16. Get In Touch
Complete control over products
allows us to ensure our
customers receive the best
quality prices and service.
• USA Headquarters
17777 I-45 S, Conroe Tx 77385
Phone: 936 273 3300
Hours: Mon-Fri: 8am – 5pm CST
• Mailing Address
P.O. Box 7060, The Woodlands Tx
77387
Fax: 936 273 4600
Email: epcon@epconlp.com