The document describes 3 floor upgrade methods using the DCS Twister system: 1. Twister Standard upgrades the floor over 6-9 weeks through 3 color steps, with 2-3 weeks of conditioning between each step. 2. Twister Intensive uses the same process as Standard but completes it overnight through 10 passes of each pad color. It is for when quick improvement is required. 3. Twister Extreme dry polishes the floor with a high-speed machine and green Twister pad to further increase gloss, especially for demanding customers or demonstrations.

1. DCS Twister™ Standard
What: Floor upgrade performed through 3 steps over a period of 6-9
weeks (2-3 weeks per color). Each TWISTER step requires normally 2-
3 weeks of operating with Floor Conditioner for an optimal result.
Why: Use when starting condition of floor is not satisfactory.
When: Most common method to upgrade floors. No extra labor
required
DCS Twister™ Intensive
What: Same process as TWISTER Standard, but ran during one night.
Approx 10 passes over the surface for each pad color.
Why: Use when starting condition of floor is not satisfactory.
When: Quick improvement of floor required. Demonstration of Twister
Important to note is that Twister
primarily is a system for daily
maintenance – where an initial
upgrade of the gloss and
cleanliness is beneficiary!
If going back to conventional
pads after the upgrade the gloss
and cleanliness will fall again!
3 alternative TWISTER floor upgrade methods
Professional Floor Systems
When: Quick improvement of floor required. Demonstration of Twister
performance.
DCS Twister™ Extreme
What: Dry polish floor with a High speed machine and Twister green.
Complement to Standard/Intensive method or daily maintenance with
green pad to further improve result
Why: Increase the gloss
When: Demanding customers/ typically effective in demonstrations