Fall Presentation 2021-2022Atch.pptx
•Download as PPTX, PDF•
0 likes•3 views
This proposal is for a senior design project to build an unmanned aerial vehicle (UAV) equipped with radiation sensors to measure radiation levels around a nuclear reactor during emergencies. The proposal outlines the need for faster radiation measurements, introduces the team members and advisors, provides background on hardware/software requirements and existing solutions, defines the problem statement and proposed solution, discusses dividing responsibilities among team members, and provides a budget and timeline for completing the work over nine months. The UAV system is intended to address delays in current monitoring methods and provide automated, predefined radiation scans to analyze and display data in real-time.
Report
Share
Report
Share
Recommended
System Proposal TemplateCSC 545 System Design When preparing a.docx
System Proposal Template
CSC 545 System Design
When preparing a systems proposal, systems analysts should arrange the following items in order:
Ten Main Section of your System Proposal
1. Cover Letter
List of people who did the study and summarize the objectives of the study are provided in your cover letter. Also, prearranged time and place for oral presentation of the system proposal can be included. Keep your cover letter concise (one page maximum) and friendly.
2. Title Page of project
Include the name of the project, the names of the systems analysis team members, and the date the proposal is submitted.
3. Table of Contents
If the proposal is very short (less than ten pages), you can omit the table of contents since it is unnecessary on such a short document. The purpose of your table of contents is to indicate the contents of your proposal.
4. Executive Summary (including recommendations)
Usually, the executive summary is 250 to 375 words and can answer the questions such as who, what, when, where, why and how of the proposal. It should also include recommendation of the system analysts since some people will only have time to read the summary.
5. Outline of system study with appropriate documentation
Provides information about all the methods used in the study, and who or what was studied.
6. Detailed results of systems study
The details what the system analyst has found out about the system through all of the methods described are included in this section. It also presents problems with the system
7. Systems alternatives (3 or 4 possible solutions)
The analyst will present two or three alternative solutions that directly address the aforementioned problems. Each alternative should be explored separately. Describe the costs and benefits of each situation.
8. System’s analysts’ recommendations
After the systems analysis team has weighed the alternatives, it will have a definite professional opinion about which solution is most workable and best to solve the problem. It expresses the recommended solution.
9. Summary
It is brief statement that mirrors the content of your executive summary. It gives the objectives of the study and the recommended solution. Also, it allows the analyst one more chance to stress the project’s importance and feasibility along with the value of the recommendations.
10. Appendices
It might include pertinent correspondence, a summary of phases completed in the study, detailed graph for analyses purposes, or even previously done systems studies.
Source: http://sampleproposal.net
Project Design Document Template
CSC 845
Project Title
[Give your project a short but meaningful title]
Problem Definition
[In one or two paragraphs, describe the problem that you are trying to solve. For some projects in business this may be something that needs to be fixed but for the class project, you will be describing a brand new mobile application here. Mention what you application is, why your application will he ...
Design Document – Week 1 – ProposalCourse ID IT 491 CAPSTONE .docx
Design Document – Week 1 – Proposal
Course ID: IT 491
CAPSTONE PROJECT
Instructions:
This template must be filled out completely and turned into the course instructor. If you need assistance please contact the instructor prior to the due date.
This is an individual assignment and all work must be original and should be designed, submitted, and documented entirely by the student.
This assignment is worth 50 points.
It is strongly recommended that you get your topic selection approved by your instructor BEFORE submitting week one work.
Name:
STUDENT NAME: Pierre Logon
Project Title:
PROJECT TITLE: Penetration Testing
Project Fundamentals:
PROBLEM DEFINITION (Your IT project should solve a well-defined problem):
Each question should have a 1 to 2 paragraph response. This section is worth 15 points.
· Organization - Who is the organization you are completing work for? Is this a fictional or real company? How large is the company?
The organization is a virtual company that will be use for the purpose of the project.
· Problem - What is the problem(s) you are addressing? (i.e. are you moving locations, are you improving performance of existing computers, are you expanding your services, are you creating a new department, are you improving security? etc.)
The problem that I am addressing is the vulnerability of the network of this virtual company and the assessment to address it.
· Outcomes - What will be the desired outcome of this project? These outcomes should be measurable and specific.
The organization is a virtual company that will be use for the purpose of this project.
The company is a small company with the size of 10 employees.
I will be using Vmware to create servers ,network routers and desktop for the purpose of the demonstration in the virtual machine.
I will then test my network environment for Denial of Service vulnerability
TECHNOLOGY SOLUTION You should have a top-level idea of the solution or how you will solve the problem:
This section is worth 20 points. This section should be 3-4 paragraphs and should include the following information.
· What is the proposed solution?
· How do you propose to complete your project?
· What tools and/or methodology (e.g. Network Diagram, IP Addressing, Security Technologies, Virtualization, Operating Systems, etc.) will be used to design, implement, and deliver the proposed solution?
· What type of resources (e.g., software, hardware, virtualization techniques, etc.) will you need to complete your project?
The proposed solution is to assess the penetration testing with WIRESHARK
OBJECTIVE ALIGNMENT Because this project is a demonstration of the skills you have learned throughout your time here at Herzing University, your project should address each of the program outcomes. Describe how your proposed project meets each of these specific course outcomes:
Each objective should be addressed in one or two complete sentences. This section is worth 15 points.
· Apply industry stan.
Test planning
The document outlines a software testing lifecycle practice plan that includes test planning, case design, execution, defect tracking, and reporting over 10 hours total. It provides details on each stage including objectives, key points, and sample templates. Homework involves drafting a test plan, cases, and report for testing a work log system.
Enterprise Architecture Workshop London - July 17th 2017
Slides from The BCS EA Conference in London on the 17th July - Focus was on the group exercise of defining and linking architectural artefacts with various project types
EEECSE 120 Answer SheetCapstone Design Project .docx
EEE/CSE 120
Answer Sheet
Capstone Design Project
Name:__________________________
Instructor:__________________________
Class Time:________________________
Date:________________________
Task 4-1: Design of Synchronous Sequential Machines
Design #1 (Mealy machine)
: What assumptions did you make in the design of this machine?
Create a state definition table here that describes in plain English what each state in your machine means and what binary values you have assigned to represent each state.
Create tables here to display your state diagrams, state transition tables and Karnaugh maps used in your design process. (You can do this by hand if you wish.)
Cut and paste your Quartus schematic and timing diagram simulation for design #1 (Mealy machine) here:
Design #2 (Moore machine): What assumptions did you make in the design of this machine?
Create a state definition table here that describes in plain English what each state in your machine means and what binary values you have assigned to represent each state.
Create tables here to display your state diagrams, state transition tables and Karnaugh maps used in your design process. (You can do this by hand if you wish.)
Cut and paste your Quartus schematic and timing diagram simulation for design #2 (Moore machine) here:
Task 4-2: Simulate Both Designs in the Lab in Presence of the TA
Demonstrate that both of your circuits meet the completed design specification to the laboratory assistants and have the TAs apply a grade here.
Grade: 1st Design ____/15 Grade: 2nd Design____/15
Task 4-3: Determine Criteria and Weighting for Judging Your Designs
Using the guidelines in the laboratory manual, list your criteria and associated weights here:
Criteria
Weight
Task 4-4: Apply the Criteria to Pick the Best Design
Describe how you applied the criteria and weighting system in the above task to pick the best design.
Which design is better based on your criteria and weighting system?
Task 4-5: Upload One Design to the FPGA Board in the Laboratory
Demonstrate to a laboratory assistant that one of your designs works according to your completed specification.
Laboratory assistant evaluation:
Capstone Design Project: Lab Report Grade Sheet
Name:
Instructor Assessment:
Grading Criteria
Max Points
Points lost
Template
Neatness, Clarity, and Concision
5
Description of Assigned Tasks, Work Performed & Outcomes Met
Task 4-1: Design of Synchronous Sequential Machines
22
Task 4-2: Simulate Both Designs
30
Task 4-3: Determine Criteria and Weighting for Judging Your Designs
5
Task 4-4: Apply the Criteria to Pick the Best Design
8
Task 4-5: Upload One Design to the FPGA Board in the Laboratory
30
Self-Assessment Worksheet (The content of the self-assessment worksheet will not be graded. Full credit is given for including the completed worksheet.)
(2 extra points)
Points .
Bsa 376 week 1 dq 1
The document outlines the assignments and discussion questions for a course on systems development lifecycle (SDLC). It includes three individual assignments analyzing a work-related project using different SDLC phases, from analysis to design to implementation. It also includes a final group project applying the full SDLC methodology to address a specific functional area need. Discussion questions cover key elements of different SDLC phases and methodologies.
Bsa 376 week 1 dq 2
This document outlines the coursework for BSA 376 which includes several individual assignments and a group assignment. The individual assignments involve analyzing a work-related project using systems analysis and the SDLC process. This includes gathering requirements, designing system architecture and processes, and discussing the development and implementation stages. The group assignment involves applying the full SDLC methodology to address a specific functional area need through a paper and presentation. Discussion questions are also provided for each week.
Bsa 376 week 4 dq 1
This document contains information about assignments and discussion questions for a business systems development life cycle (SDLC) course. It includes assignments on analyzing a work-related project using systems analysis tools, describing the architecture and process design, and discussing the development and implementation stages. It also includes discussion questions about important elements in SDLC phases, different SDLC approaches, defining project scope, constraints on system design, and development and implementation approaches. A final group project involves applying the full SDLC methodology to address a functional area's needs.
Recommended
System Proposal TemplateCSC 545 System Design When preparing a.docx
System Proposal Template
CSC 545 System Design
When preparing a systems proposal, systems analysts should arrange the following items in order:
Ten Main Section of your System Proposal
1. Cover Letter
List of people who did the study and summarize the objectives of the study are provided in your cover letter. Also, prearranged time and place for oral presentation of the system proposal can be included. Keep your cover letter concise (one page maximum) and friendly.
2. Title Page of project
Include the name of the project, the names of the systems analysis team members, and the date the proposal is submitted.
3. Table of Contents
If the proposal is very short (less than ten pages), you can omit the table of contents since it is unnecessary on such a short document. The purpose of your table of contents is to indicate the contents of your proposal.
4. Executive Summary (including recommendations)
Usually, the executive summary is 250 to 375 words and can answer the questions such as who, what, when, where, why and how of the proposal. It should also include recommendation of the system analysts since some people will only have time to read the summary.
5. Outline of system study with appropriate documentation
Provides information about all the methods used in the study, and who or what was studied.
6. Detailed results of systems study
The details what the system analyst has found out about the system through all of the methods described are included in this section. It also presents problems with the system
7. Systems alternatives (3 or 4 possible solutions)
The analyst will present two or three alternative solutions that directly address the aforementioned problems. Each alternative should be explored separately. Describe the costs and benefits of each situation.
8. System’s analysts’ recommendations
After the systems analysis team has weighed the alternatives, it will have a definite professional opinion about which solution is most workable and best to solve the problem. It expresses the recommended solution.
9. Summary
It is brief statement that mirrors the content of your executive summary. It gives the objectives of the study and the recommended solution. Also, it allows the analyst one more chance to stress the project’s importance and feasibility along with the value of the recommendations.
10. Appendices
It might include pertinent correspondence, a summary of phases completed in the study, detailed graph for analyses purposes, or even previously done systems studies.
Source: http://sampleproposal.net
Project Design Document Template
CSC 845
Project Title
[Give your project a short but meaningful title]
Problem Definition
[In one or two paragraphs, describe the problem that you are trying to solve. For some projects in business this may be something that needs to be fixed but for the class project, you will be describing a brand new mobile application here. Mention what you application is, why your application will he ...
Design Document – Week 1 – ProposalCourse ID IT 491 CAPSTONE .docx
Design Document – Week 1 – Proposal
Course ID: IT 491
CAPSTONE PROJECT
Instructions:
This template must be filled out completely and turned into the course instructor. If you need assistance please contact the instructor prior to the due date.
This is an individual assignment and all work must be original and should be designed, submitted, and documented entirely by the student.
This assignment is worth 50 points.
It is strongly recommended that you get your topic selection approved by your instructor BEFORE submitting week one work.
Name:
STUDENT NAME: Pierre Logon
Project Title:
PROJECT TITLE: Penetration Testing
Project Fundamentals:
PROBLEM DEFINITION (Your IT project should solve a well-defined problem):
Each question should have a 1 to 2 paragraph response. This section is worth 15 points.
· Organization - Who is the organization you are completing work for? Is this a fictional or real company? How large is the company?
The organization is a virtual company that will be use for the purpose of the project.
· Problem - What is the problem(s) you are addressing? (i.e. are you moving locations, are you improving performance of existing computers, are you expanding your services, are you creating a new department, are you improving security? etc.)
The problem that I am addressing is the vulnerability of the network of this virtual company and the assessment to address it.
· Outcomes - What will be the desired outcome of this project? These outcomes should be measurable and specific.
The organization is a virtual company that will be use for the purpose of this project.
The company is a small company with the size of 10 employees.
I will be using Vmware to create servers ,network routers and desktop for the purpose of the demonstration in the virtual machine.
I will then test my network environment for Denial of Service vulnerability
TECHNOLOGY SOLUTION You should have a top-level idea of the solution or how you will solve the problem:
This section is worth 20 points. This section should be 3-4 paragraphs and should include the following information.
· What is the proposed solution?
· How do you propose to complete your project?
· What tools and/or methodology (e.g. Network Diagram, IP Addressing, Security Technologies, Virtualization, Operating Systems, etc.) will be used to design, implement, and deliver the proposed solution?
· What type of resources (e.g., software, hardware, virtualization techniques, etc.) will you need to complete your project?
The proposed solution is to assess the penetration testing with WIRESHARK
OBJECTIVE ALIGNMENT Because this project is a demonstration of the skills you have learned throughout your time here at Herzing University, your project should address each of the program outcomes. Describe how your proposed project meets each of these specific course outcomes:
Each objective should be addressed in one or two complete sentences. This section is worth 15 points.
· Apply industry stan.
Test planning
The document outlines a software testing lifecycle practice plan that includes test planning, case design, execution, defect tracking, and reporting over 10 hours total. It provides details on each stage including objectives, key points, and sample templates. Homework involves drafting a test plan, cases, and report for testing a work log system.
Enterprise Architecture Workshop London - July 17th 2017
Slides from The BCS EA Conference in London on the 17th July - Focus was on the group exercise of defining and linking architectural artefacts with various project types
EEECSE 120 Answer SheetCapstone Design Project .docx
EEE/CSE 120
Answer Sheet
Capstone Design Project
Name:__________________________
Instructor:__________________________
Class Time:________________________
Date:________________________
Task 4-1: Design of Synchronous Sequential Machines
Design #1 (Mealy machine)
: What assumptions did you make in the design of this machine?
Create a state definition table here that describes in plain English what each state in your machine means and what binary values you have assigned to represent each state.
Create tables here to display your state diagrams, state transition tables and Karnaugh maps used in your design process. (You can do this by hand if you wish.)
Cut and paste your Quartus schematic and timing diagram simulation for design #1 (Mealy machine) here:
Design #2 (Moore machine): What assumptions did you make in the design of this machine?
Create a state definition table here that describes in plain English what each state in your machine means and what binary values you have assigned to represent each state.
Create tables here to display your state diagrams, state transition tables and Karnaugh maps used in your design process. (You can do this by hand if you wish.)
Cut and paste your Quartus schematic and timing diagram simulation for design #2 (Moore machine) here:
Task 4-2: Simulate Both Designs in the Lab in Presence of the TA
Demonstrate that both of your circuits meet the completed design specification to the laboratory assistants and have the TAs apply a grade here.
Grade: 1st Design ____/15 Grade: 2nd Design____/15
Task 4-3: Determine Criteria and Weighting for Judging Your Designs
Using the guidelines in the laboratory manual, list your criteria and associated weights here:
Criteria
Weight
Task 4-4: Apply the Criteria to Pick the Best Design
Describe how you applied the criteria and weighting system in the above task to pick the best design.
Which design is better based on your criteria and weighting system?
Task 4-5: Upload One Design to the FPGA Board in the Laboratory
Demonstrate to a laboratory assistant that one of your designs works according to your completed specification.
Laboratory assistant evaluation:
Capstone Design Project: Lab Report Grade Sheet
Name:
Instructor Assessment:
Grading Criteria
Max Points
Points lost
Template
Neatness, Clarity, and Concision
5
Description of Assigned Tasks, Work Performed & Outcomes Met
Task 4-1: Design of Synchronous Sequential Machines
22
Task 4-2: Simulate Both Designs
30
Task 4-3: Determine Criteria and Weighting for Judging Your Designs
5
Task 4-4: Apply the Criteria to Pick the Best Design
8
Task 4-5: Upload One Design to the FPGA Board in the Laboratory
30
Self-Assessment Worksheet (The content of the self-assessment worksheet will not be graded. Full credit is given for including the completed worksheet.)
(2 extra points)
Points .
Bsa 376 week 1 dq 1
The document outlines the assignments and discussion questions for a course on systems development lifecycle (SDLC). It includes three individual assignments analyzing a work-related project using different SDLC phases, from analysis to design to implementation. It also includes a final group project applying the full SDLC methodology to address a specific functional area need. Discussion questions cover key elements of different SDLC phases and methodologies.
Bsa 376 week 1 dq 2
This document outlines the coursework for BSA 376 which includes several individual assignments and a group assignment. The individual assignments involve analyzing a work-related project using systems analysis and the SDLC process. This includes gathering requirements, designing system architecture and processes, and discussing the development and implementation stages. The group assignment involves applying the full SDLC methodology to address a specific functional area need through a paper and presentation. Discussion questions are also provided for each week.
Bsa 376 week 4 dq 1
This document contains information about assignments and discussion questions for a business systems development life cycle (SDLC) course. It includes assignments on analyzing a work-related project using systems analysis tools, describing the architecture and process design, and discussing the development and implementation stages. It also includes discussion questions about important elements in SDLC phases, different SDLC approaches, defining project scope, constraints on system design, and development and implementation approaches. A final group project involves applying the full SDLC methodology to address a functional area's needs.
Bsa 376 week 5 dq 2
This document outlines the assignments and discussion questions for a course on systems development lifecycle (SDLC). It includes three individual assignments analyzing a work-related project using SDLC phases and a final group project applying the full SDLC methodology. Discussion questions address key elements of each SDLC phase like scope, requirements, design constraints, and challenges of system development.
Bsop 326 Enhance teaching - tutorialrank.com
For more course tutorials visit
www.tutorialrank.com
Tutorial Purchased: 3 Times, Rating: A+
WEEK 1DQ 1 What is Total Quality Management
WEEK 1DQ 2 A System Perspective
WEEK 2DQ 1Dr. Deming's 14 Points
WEEK 2DQ 2 Quality Philosophies, Awards, and Standards
WEEK 3DQ 1 TQM Leaders
BSOP 326 Effective Communication/tutorialrank.com
This document contains summaries of tutorials purchased from www.tutorialrank.com for various courses. It includes summaries of discussion questions for BSOP 326 weeks 1-7 that cover topics like total quality management, quality philosophies and standards, statistical tools, and implementing TQM. It also includes summaries of a BSOP-326 week 4 midterm exam that covers high-performance work systems and a BSOP-326 week 7 case study on Fujiyama Electronics that involves analyzing process data using control charts. The document provides an overview of the content covered in the tutorials purchased from the tutorial website.
NTC 411 Invent Yourself/newtonhelp.com
For more course tutorials visit
www.newtonhelp.com
Scenario: As an IT administrator for your organization, your supervisor has given you an assignment to review and evaluate ways for improving the network for International Plastics.
The Technology Process (Updated)
A guide for students working through AS 1.1, 1.2, 1.5, 1.6 and US 18735, designing a website for NetGuide Web Challenge (updated).
Applied Business Project 2 – Data VisualizationYou MUST use th.docx
Applied Business Project 2 – Data Visualization
You MUST use this template for your report
and submit your ABP-2 report to D2L as a PDF file.
Name: Lastname, Firstname (UA Email address)
Project: ABP-2 – Data Visualization
Task 1: ETL of Transactional Data
1.1.
Extract of Extracted Data (from Yahoo! Finance)
<insert the Header plus
only the first 10 rows of your downloaded CSV datafile here>
Important Note: Be sure your solution for Task 1.1 copies the data directly from your text editor (as lines of “text” and not as an image) so that your solution matches the unformatted data in the CSV file shown in the assignment guidelines. You must use a text editor for this task. You
cannot open your CSV file using Word, Pages, Excel, Sheets or other similar applications.
1.2.
Stock Price Summary Table (Based on Full Data Set)
<insert your solution for Task 1.2 table here>
1.3.
Stock Price Summary Table Formulas
1.3.1.
Excel Formula for the Daily Open Low
<insert your Excel formula for Task 1.3.1 here>
1.3.2.
Excel Formula for the Daily Open High
<insert your Excel formula
for Task 1.3.2 here>
1.3.3.
Excel Formula for the Daily Open Range
<insert your Excel formula
for Task 1.3.3 here>
1.4.
Data Visualizations (Stock Trading Prices)
<insert your visualization solution for Task 1.4 graph>
1.5 Data Visualizations (Trading Volume)
<insert your solution for Task 1.5 graph>
1.6 Assessment of how Visualizations can inform an investor (150 words)
<insert your written Assessment for Task 1.6 here> Task 2: Comparative Market and Financial Strength
2.
2.1. Tabular Data Representation
<insert your solution for Task 2.1>
2.2. Treemap Charts of financial data – your company
<insert your treemap chart for Task 2.2> - your company
2.3. Treemap Charts of financial data – a competitor
<insert your treemap chart for Task 2.3> - a competitor
2.4. Treemap Charts of financial data – a company ourside your industry
<insert your treemap chart for Task 2.4> - an unrelated company
2.5 Value of a Treemap Chart in Investment Analysis (150 words)
<insert your solution for Task 2.5 here>Task 3: Profiling Corporate Sustainability
3.
3.1.
Tabular Data for Sustainability Visualization
<insert your solution for Task 3.1 here>
3.2.
Sustainability Visualization (Radar Chart)
<insert your solution for Task 3.2>
3.3.
Sustainability Assessment (150 words)
<insert your solution for Task 3.3> Task 4: Assessing your stock the Warren Buffet Way
4.
4.1. Selection of Criteria and Visualization Chart Type4.1.1.
Criterion identifier and description
<insert your solution for Task 4.1.1>
4.1.2.
Selected chart type
<insert your solution for Task 4.1.2>
4.2. Visualization Assessment (15.
NTC 411 Enhance teaching - snaptutorial.com
For more classes visit
www.snaptutorial.com
Scenario: As an IT administrator for your organization, your supervisor has given you an assignment to review and evaluate ways for improving the network for International Plastics. Your task, as detailed below, includes
Big Apple Scrum Day 2015 - Advanced Scrum Metrics Reference Sheet
Reference sheet for presentation given at Big Apple Scrum Day 2015 on advanced metrics for agile and scrum teams. It is recommended that teams track a few metrics for each of the 5 categories outlined in the presentation to be able to assess the impact of activities supportive of continuous improvement. This reference sheet includes over 30 metrics to give teams ideas on what they can measure. There isn’t a requirement to track 30 metrics on a scrum or agile team but rather teams should track just enough metrics to be able to understand their performance.
Bsa 376 week 2 dq 2
This document outlines the assignments and discussion questions for a course on systems development lifecycle (SDLC). It includes 3 individual papers and 1 group paper analyzing different phases of an SDLC for a work-related project. It also includes discussion questions about important elements, approaches, scope, requirements, design constraints, security, and challenges of the SDLC process.
Capstone- Milestone 3
The document summarizes an analysis of alternatives project conducted by students to evaluate various workstation deployment solutions for a sponsoring company. It includes objectives to identify 10 potential tools, narrow it down to the top 3 for testing, test and compare them against requirements, and provide a recommendation. It outlines the benefits to students and sponsor, timeline, tools tested (SmartDeploy, KACE Systems Deployment, Ghost Solution, PDQ), testing processes, comparison of tools, lessons learned and next steps which is to complete testing and prepare a final report.
Criteria for Research AssignmentPSCI 1010· The paper is due on.docx
Criteria for Research Assignment
PSCI 1010
· The paper is due on Apr. 29 before 11:59pm.
· For your final paper, you might want to follow the suggested guideline/rubric below:
1) Introduction
a) Thesis: “The primary purpose of this paper is to...”, Or “Terrorist attacks influence public support for civil liberties” The thesis of the research should be stated early in the paper—the first few paragraphs. http://writingcenter.unc.edu/handouts/thesis-statements/
b) Include in your introduction a brief statement describing the importance of the topic and the thesis. What is new here? What are the political, theoretical, and normative implications of your research? How does your research improve upon the existing literature? What contribution will the proposed research make to the literature? What new, exciting directions will you take the literature? Like a journalist, you need to convince the reader that the paper is worthy of careful consideration.
c) Be sure to discuss the political implications of your research.
d) Plan of the paper: In a brief paragraph (usually placed at the end of your introduction), give an overview of your arguments and how the paper will be organized. This should be short.
e) Think about the Reader when writing your paper. You must convince the Reader (me or anonymous reviewers) in the first few sentences to keep reading. You need to engage the Reader, tell her/him what your research is about, convince her of the importance of your study and its contribution to the literature. The Reader is busy and has volunteered a few hours of their day to read your study. -Narrative Hook-
2) Past Research (review of the literature—collect qualitative/quantitative data to support your thesis). Please be especially vigilant about keeping the review relevant to the central thesis of the paper, which should be the central organizing theme of your paper. I don’t want a bibliographic essay, but an evaluation of relevant prior research on the topic that will prove or disprove your thesis statement (three concise but informative paragraphs).
a) Strengths and weaknesses of prior research; you might discuss one or more of the
following:
i) How existing research has overlooked or given inadequate attention to your topic,
for whatever reason.
ii) You might critique existing studies on a number of grounds, including inadequate measures, inappropriate design, fuzzy concepts, lack of theory, contradictory findings, puzzles in the literature that need to be solved, and so on.
b) Don’t call it a “Literature Review” and don’t say you are filling a gap in the literature.
3) Conclusions: Reflect back on your thesis and the contribution of your research.
It’s that simple! Something else you might do is take a close look at an article you really like and see how the authors introduce the topic, make transitions, and all the other things listed above. Use that.
BSOP 326 Success Begins /newtonhelp.com
This document contains discussion questions and assignments for multiple weeks of a quality management course. It includes questions about total quality management philosophies and tools, customer focus, statistical process control, and implementing quality systems. It also contains a case study assignment on using control charts to analyze variation in circuit board drilling measurements from a supplier. Students are asked to calculate control limits, create X-Bar and R charts, identify out-of-control points, recalculate with their removal, and discuss the changes between the original and updated control charts.
Seminar on Crystal Clear
Crystal Clear is an agile software development methodology created by Alistair Cockburn. It focuses on 7 properties: frequent delivery, reflective improvement, osmotic communication, personal safety, focus, easy access to expert users, and an automated testing environment. The development process in Crystal Clear involves several cycles including the project cycle, delivery cycle, iteration cycle, daily cycle, integration cycle, and development episode. It emphasizes frequent delivery to users, reflection and improvement, collaboration through open communication, and an environment that allows developers to focus on their work.
BSOP 326 Expect Success/newtonhelp.com
For more course tutorials visit
www.newtonhelp.com
WEEK 1DQ 1 What is Total Quality Management
WEEK 1DQ 2 A System Perspective
Organizational Process AnalysisBackgroundYou are a senior member o.docx
The IT systems at SAI Toys, a toy manufacturer, need to be integrated to improve operations and enable direct-to-customer e-commerce sales. The company has four separate IT systems for its website, manufacturing, human resources, and sales/marketing. The board wants a single, integrated system and a stronger online presence. An analysis of alternatives is needed along with a recommendation for how to implement the new system through either in-house development, outsourcing, or purchasing off-the-shelf software. Stakeholder buy-in and addressing potential political issues will also be important.
NTC 411 Effective Communication/tutorialrank.com
For more course tutorials visit
www.tutorialrank.com
Scenario: As an IT administrator for your organization, your supervisor has given you an assignment to review and evaluate ways for improving the network for International Plastics. Your task, as detailed below, includes reviewing the existing network services and configuration documents to seek ways to improve the network and
Project #1-Note all projects must be in seperate microsoft word.docx
Project #1-
*Note all projects must be in seperate microsoft word documents...
Consultant’s Analysis Report on Enterprise System
Throughout this course, you will be preparing a Consultant’s Analysis Report on Enterprise Systems for a project of your choosing that will culminate in the Final Key Assignment. You will not be developing any software or actually implementing a system, but you will work extensively with the concepts of good analysis of enterprise systems implementation. Additional information and the deliverables for each Individual Project will be provided in the assignment description for that project.
Project Selection:
The first step will be to select a project as the target for your analysis. This project will be used as the basis for each of the assignments throughout the course and should conform to the following guidelines:
Nontrivial: The selected project should be large enough to allow reasonable exercise of the system analysis and design process.
Domain Knowledge: You should be familiar enough with the organization or system category to allow focus on the planning tasks without significant time required for domain education.
Accessibility: You should have good access to the people and other information related to the organization or system because this will be an important part of the process.
Select an enterprise system project that fits these requirements and submit your proposal to your instructor before proceeding further with the assignments in the course. Approval should be sought within the first several days of the course. Your instructor will tell you how to submit this proposal and what notification will be given for project approval.
Assignment:
For the assignments in this course you will be developing a comprehensive document entitled
Consultant’s Analysis Report on Enterprise Systems
. Your first task in this process will be to select a project to use as the basis of your plan. You will also create the shell document for the final project deliverable that you will be working on during each unit. As you proceed through each project week, you will add content to each section of the final document to gradually complete the final project delivery. Appropriate research should be conducted to support the analysis in your plan, and assumptions may be made when necessary.
The project deliverables are:
Submit project proposal to instructor for approval
Consultant’s Analysis Report on Enterprise Systems Shell
Use MS Word
Title page
Course number and name
Project name
Student name
Date
Table of contents
Use autogenerated TOC.
Separate page
Maximum of 3 levels deep
Be sure to update fields of TOC so it is up-to-date before submitting project
Section headings (create each heading on a new page with TBD as content except for sections listed under "New content" below)
Project Outline
System Requirements
Architecture Selection
Resources and Timeline
Security
Final Analysis and ...
Why Should I Have More Than 1 Technique for Retrospectives?
Mike Harris' presentation from UNICOM's Agile Methods conference in 2016. He offers various retrospective techniques for consideration.
OMG: Preventive Maintenance 2015
Highlights the details of Origin Metrology Group's preventive and predictive maintenance support options as well as our engineering philosophies and methodologies associated with our services.
8D analysis presentation
This is very useful presentation on "8D method" for analysis of customer complaint and rejection analysis.
Beyond the Basics of A/B Tests: Highly Innovative Experimentation Tactics You...
This webinar will explore cutting-edge, less familiar but powerful experimentation methodologies which address well-known limitations of standard A/B Testing. Designed for data and product leaders, this session aims to inspire the embrace of innovative approaches and provide insights into the frontiers of experimentation!
原版制作(unimelb毕业证书)墨尔本大学毕业证Offer一模一样
学校原件一模一样【微信：741003700 】《(unimelb毕业证书)墨尔本大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
More Related Content
Similar to Fall Presentation 2021-2022Atch.pptx
Bsa 376 week 5 dq 2
This document outlines the assignments and discussion questions for a course on systems development lifecycle (SDLC). It includes three individual assignments analyzing a work-related project using SDLC phases and a final group project applying the full SDLC methodology. Discussion questions address key elements of each SDLC phase like scope, requirements, design constraints, and challenges of system development.
Bsop 326 Enhance teaching - tutorialrank.com
For more course tutorials visit
www.tutorialrank.com
Tutorial Purchased: 3 Times, Rating: A+
WEEK 1DQ 1 What is Total Quality Management
WEEK 1DQ 2 A System Perspective
WEEK 2DQ 1Dr. Deming's 14 Points
WEEK 2DQ 2 Quality Philosophies, Awards, and Standards
WEEK 3DQ 1 TQM Leaders
BSOP 326 Effective Communication/tutorialrank.com
This document contains summaries of tutorials purchased from www.tutorialrank.com for various courses. It includes summaries of discussion questions for BSOP 326 weeks 1-7 that cover topics like total quality management, quality philosophies and standards, statistical tools, and implementing TQM. It also includes summaries of a BSOP-326 week 4 midterm exam that covers high-performance work systems and a BSOP-326 week 7 case study on Fujiyama Electronics that involves analyzing process data using control charts. The document provides an overview of the content covered in the tutorials purchased from the tutorial website.
NTC 411 Invent Yourself/newtonhelp.com
For more course tutorials visit
www.newtonhelp.com
Scenario: As an IT administrator for your organization, your supervisor has given you an assignment to review and evaluate ways for improving the network for International Plastics.
The Technology Process (Updated)
A guide for students working through AS 1.1, 1.2, 1.5, 1.6 and US 18735, designing a website for NetGuide Web Challenge (updated).
Applied Business Project 2 – Data VisualizationYou MUST use th.docx
Applied Business Project 2 – Data Visualization
You MUST use this template for your report
and submit your ABP-2 report to D2L as a PDF file.
Name: Lastname, Firstname (UA Email address)
Project: ABP-2 – Data Visualization
Task 1: ETL of Transactional Data
1.1.
Extract of Extracted Data (from Yahoo! Finance)
<insert the Header plus
only the first 10 rows of your downloaded CSV datafile here>
Important Note: Be sure your solution for Task 1.1 copies the data directly from your text editor (as lines of “text” and not as an image) so that your solution matches the unformatted data in the CSV file shown in the assignment guidelines. You must use a text editor for this task. You
cannot open your CSV file using Word, Pages, Excel, Sheets or other similar applications.
1.2.
Stock Price Summary Table (Based on Full Data Set)
<insert your solution for Task 1.2 table here>
1.3.
Stock Price Summary Table Formulas
1.3.1.
Excel Formula for the Daily Open Low
<insert your Excel formula for Task 1.3.1 here>
1.3.2.
Excel Formula for the Daily Open High
<insert your Excel formula
for Task 1.3.2 here>
1.3.3.
Excel Formula for the Daily Open Range
<insert your Excel formula
for Task 1.3.3 here>
1.4.
Data Visualizations (Stock Trading Prices)
<insert your visualization solution for Task 1.4 graph>
1.5 Data Visualizations (Trading Volume)
<insert your solution for Task 1.5 graph>
1.6 Assessment of how Visualizations can inform an investor (150 words)
<insert your written Assessment for Task 1.6 here> Task 2: Comparative Market and Financial Strength
2.
2.1. Tabular Data Representation
<insert your solution for Task 2.1>
2.2. Treemap Charts of financial data – your company
<insert your treemap chart for Task 2.2> - your company
2.3. Treemap Charts of financial data – a competitor
<insert your treemap chart for Task 2.3> - a competitor
2.4. Treemap Charts of financial data – a company ourside your industry
<insert your treemap chart for Task 2.4> - an unrelated company
2.5 Value of a Treemap Chart in Investment Analysis (150 words)
<insert your solution for Task 2.5 here>Task 3: Profiling Corporate Sustainability
3.
3.1.
Tabular Data for Sustainability Visualization
<insert your solution for Task 3.1 here>
3.2.
Sustainability Visualization (Radar Chart)
<insert your solution for Task 3.2>
3.3.
Sustainability Assessment (150 words)
<insert your solution for Task 3.3> Task 4: Assessing your stock the Warren Buffet Way
4.
4.1. Selection of Criteria and Visualization Chart Type4.1.1.
Criterion identifier and description
<insert your solution for Task 4.1.1>
4.1.2.
Selected chart type
<insert your solution for Task 4.1.2>
4.2. Visualization Assessment (15.
NTC 411 Enhance teaching - snaptutorial.com
For more classes visit
www.snaptutorial.com
Scenario: As an IT administrator for your organization, your supervisor has given you an assignment to review and evaluate ways for improving the network for International Plastics. Your task, as detailed below, includes
Big Apple Scrum Day 2015 - Advanced Scrum Metrics Reference Sheet
Reference sheet for presentation given at Big Apple Scrum Day 2015 on advanced metrics for agile and scrum teams. It is recommended that teams track a few metrics for each of the 5 categories outlined in the presentation to be able to assess the impact of activities supportive of continuous improvement. This reference sheet includes over 30 metrics to give teams ideas on what they can measure. There isn’t a requirement to track 30 metrics on a scrum or agile team but rather teams should track just enough metrics to be able to understand their performance.
Bsa 376 week 2 dq 2
This document outlines the assignments and discussion questions for a course on systems development lifecycle (SDLC). It includes 3 individual papers and 1 group paper analyzing different phases of an SDLC for a work-related project. It also includes discussion questions about important elements, approaches, scope, requirements, design constraints, security, and challenges of the SDLC process.
Capstone- Milestone 3
The document summarizes an analysis of alternatives project conducted by students to evaluate various workstation deployment solutions for a sponsoring company. It includes objectives to identify 10 potential tools, narrow it down to the top 3 for testing, test and compare them against requirements, and provide a recommendation. It outlines the benefits to students and sponsor, timeline, tools tested (SmartDeploy, KACE Systems Deployment, Ghost Solution, PDQ), testing processes, comparison of tools, lessons learned and next steps which is to complete testing and prepare a final report.
Criteria for Research AssignmentPSCI 1010· The paper is due on.docx
Criteria for Research Assignment
PSCI 1010
· The paper is due on Apr. 29 before 11:59pm.
· For your final paper, you might want to follow the suggested guideline/rubric below:
1) Introduction
a) Thesis: “The primary purpose of this paper is to...”, Or “Terrorist attacks influence public support for civil liberties” The thesis of the research should be stated early in the paper—the first few paragraphs. http://writingcenter.unc.edu/handouts/thesis-statements/
b) Include in your introduction a brief statement describing the importance of the topic and the thesis. What is new here? What are the political, theoretical, and normative implications of your research? How does your research improve upon the existing literature? What contribution will the proposed research make to the literature? What new, exciting directions will you take the literature? Like a journalist, you need to convince the reader that the paper is worthy of careful consideration.
c) Be sure to discuss the political implications of your research.
d) Plan of the paper: In a brief paragraph (usually placed at the end of your introduction), give an overview of your arguments and how the paper will be organized. This should be short.
e) Think about the Reader when writing your paper. You must convince the Reader (me or anonymous reviewers) in the first few sentences to keep reading. You need to engage the Reader, tell her/him what your research is about, convince her of the importance of your study and its contribution to the literature. The Reader is busy and has volunteered a few hours of their day to read your study. -Narrative Hook-
2) Past Research (review of the literature—collect qualitative/quantitative data to support your thesis). Please be especially vigilant about keeping the review relevant to the central thesis of the paper, which should be the central organizing theme of your paper. I don’t want a bibliographic essay, but an evaluation of relevant prior research on the topic that will prove or disprove your thesis statement (three concise but informative paragraphs).
a) Strengths and weaknesses of prior research; you might discuss one or more of the
following:
i) How existing research has overlooked or given inadequate attention to your topic,
for whatever reason.
ii) You might critique existing studies on a number of grounds, including inadequate measures, inappropriate design, fuzzy concepts, lack of theory, contradictory findings, puzzles in the literature that need to be solved, and so on.
b) Don’t call it a “Literature Review” and don’t say you are filling a gap in the literature.
3) Conclusions: Reflect back on your thesis and the contribution of your research.
It’s that simple! Something else you might do is take a close look at an article you really like and see how the authors introduce the topic, make transitions, and all the other things listed above. Use that.
BSOP 326 Success Begins /newtonhelp.com
This document contains discussion questions and assignments for multiple weeks of a quality management course. It includes questions about total quality management philosophies and tools, customer focus, statistical process control, and implementing quality systems. It also contains a case study assignment on using control charts to analyze variation in circuit board drilling measurements from a supplier. Students are asked to calculate control limits, create X-Bar and R charts, identify out-of-control points, recalculate with their removal, and discuss the changes between the original and updated control charts.
Seminar on Crystal Clear
Crystal Clear is an agile software development methodology created by Alistair Cockburn. It focuses on 7 properties: frequent delivery, reflective improvement, osmotic communication, personal safety, focus, easy access to expert users, and an automated testing environment. The development process in Crystal Clear involves several cycles including the project cycle, delivery cycle, iteration cycle, daily cycle, integration cycle, and development episode. It emphasizes frequent delivery to users, reflection and improvement, collaboration through open communication, and an environment that allows developers to focus on their work.
BSOP 326 Expect Success/newtonhelp.com
For more course tutorials visit
www.newtonhelp.com
WEEK 1DQ 1 What is Total Quality Management
WEEK 1DQ 2 A System Perspective
Organizational Process AnalysisBackgroundYou are a senior member o.docx
The IT systems at SAI Toys, a toy manufacturer, need to be integrated to improve operations and enable direct-to-customer e-commerce sales. The company has four separate IT systems for its website, manufacturing, human resources, and sales/marketing. The board wants a single, integrated system and a stronger online presence. An analysis of alternatives is needed along with a recommendation for how to implement the new system through either in-house development, outsourcing, or purchasing off-the-shelf software. Stakeholder buy-in and addressing potential political issues will also be important.
NTC 411 Effective Communication/tutorialrank.com
For more course tutorials visit
www.tutorialrank.com
Scenario: As an IT administrator for your organization, your supervisor has given you an assignment to review and evaluate ways for improving the network for International Plastics. Your task, as detailed below, includes reviewing the existing network services and configuration documents to seek ways to improve the network and
Project #1-Note all projects must be in seperate microsoft word.docx
Project #1-
*Note all projects must be in seperate microsoft word documents...
Consultant’s Analysis Report on Enterprise System
Throughout this course, you will be preparing a Consultant’s Analysis Report on Enterprise Systems for a project of your choosing that will culminate in the Final Key Assignment. You will not be developing any software or actually implementing a system, but you will work extensively with the concepts of good analysis of enterprise systems implementation. Additional information and the deliverables for each Individual Project will be provided in the assignment description for that project.
Project Selection:
The first step will be to select a project as the target for your analysis. This project will be used as the basis for each of the assignments throughout the course and should conform to the following guidelines:
Nontrivial: The selected project should be large enough to allow reasonable exercise of the system analysis and design process.
Domain Knowledge: You should be familiar enough with the organization or system category to allow focus on the planning tasks without significant time required for domain education.
Accessibility: You should have good access to the people and other information related to the organization or system because this will be an important part of the process.
Select an enterprise system project that fits these requirements and submit your proposal to your instructor before proceeding further with the assignments in the course. Approval should be sought within the first several days of the course. Your instructor will tell you how to submit this proposal and what notification will be given for project approval.
Assignment:
For the assignments in this course you will be developing a comprehensive document entitled
Consultant’s Analysis Report on Enterprise Systems
. Your first task in this process will be to select a project to use as the basis of your plan. You will also create the shell document for the final project deliverable that you will be working on during each unit. As you proceed through each project week, you will add content to each section of the final document to gradually complete the final project delivery. Appropriate research should be conducted to support the analysis in your plan, and assumptions may be made when necessary.
The project deliverables are:
Submit project proposal to instructor for approval
Consultant’s Analysis Report on Enterprise Systems Shell
Use MS Word
Title page
Course number and name
Project name
Student name
Date
Table of contents
Use autogenerated TOC.
Separate page
Maximum of 3 levels deep
Be sure to update fields of TOC so it is up-to-date before submitting project
Section headings (create each heading on a new page with TBD as content except for sections listed under "New content" below)
Project Outline
System Requirements
Architecture Selection
Resources and Timeline
Security
Final Analysis and ...
Why Should I Have More Than 1 Technique for Retrospectives?
Mike Harris' presentation from UNICOM's Agile Methods conference in 2016. He offers various retrospective techniques for consideration.
OMG: Preventive Maintenance 2015
Highlights the details of Origin Metrology Group's preventive and predictive maintenance support options as well as our engineering philosophies and methodologies associated with our services.
8D analysis presentation
This is very useful presentation on "8D method" for analysis of customer complaint and rejection analysis.
Similar to Fall Presentation 2021-2022Atch.pptx (20)
Applied Business Project 2 – Data VisualizationYou MUST use th.docx
Applied Business Project 2 – Data VisualizationYou MUST use th.docx
Big Apple Scrum Day 2015 - Advanced Scrum Metrics Reference Sheet
Big Apple Scrum Day 2015 - Advanced Scrum Metrics Reference Sheet
Criteria for Research AssignmentPSCI 1010· The paper is due on.docx
Criteria for Research AssignmentPSCI 1010· The paper is due on.docx
Organizational Process AnalysisBackgroundYou are a senior member o.docx
Organizational Process AnalysisBackgroundYou are a senior member o.docx
Project #1-Note all projects must be in seperate microsoft word.docx
Project #1-Note all projects must be in seperate microsoft word.docx
Why Should I Have More Than 1 Technique for Retrospectives?
Why Should I Have More Than 1 Technique for Retrospectives?
Recently uploaded
Beyond the Basics of A/B Tests: Highly Innovative Experimentation Tactics You...
This webinar will explore cutting-edge, less familiar but powerful experimentation methodologies which address well-known limitations of standard A/B Testing. Designed for data and product leaders, this session aims to inspire the embrace of innovative approaches and provide insights into the frontiers of experimentation!
原版制作(unimelb毕业证书)墨尔本大学毕业证Offer一模一样
学校原件一模一样【微信：741003700 】《(unimelb毕业证书)墨尔本大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Build applications with generative AI on Google Cloud
We will explore Vertex AI - Model Garden powered experiences, we are going to learn more about the integration of these generative AI APIs. We are going to see in action what the Gemini family of generative models are for developers to build and deploy AI-driven applications. Vertex AI includes a suite of foundation models, these are referred to as the PaLM and Gemini family of generative ai models, and they come in different versions. We are going to cover how to use via API to: - execute prompts in text and chat - cover multimodal use cases with image prompts. - finetune and distill to improve knowledge domains - run function calls with foundation models to optimize them for specific tasks. At the end of the session, developers will understand how to innovate with generative AI and develop apps using the generative ai industry trends.
一比一原版(GWU,GW文凭证书)乔治·华盛顿大学毕业证如何办理
毕业原版【微信:176555708】【(GWU,GW毕业证书)乔治·华盛顿大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
在线办理(英国UCA毕业证书)创意艺术大学毕业证在读证明一模一样
学校原件一模一样【微信：741003700 】《(英国UCA毕业证书)创意艺术大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
ViewShift: Hassle-free Dynamic Policy Enforcement for Every Data Lake
Dynamic policy enforcement is becoming an increasingly important topic in today’s world where data privacy and compliance is a top priority for companies, individuals, and regulators alike. In these slides, we discuss how LinkedIn implements a powerful dynamic policy enforcement engine, called ViewShift, and integrates it within its data lake. We show the query engine architecture and how catalog implementations can automatically route table resolutions to compliance-enforcing SQL views. Such views have a set of very interesting properties: (1) They are auto-generated from declarative data annotations. (2) They respect user-level consent and preferences (3) They are context-aware, encoding a different set of transformations for different use cases (4) They are portable; while the SQL logic is only implemented in one SQL dialect, it is accessible in all engines.
#SQL #Views #Privacy #Compliance #DataLake
Experts live - Improving user adoption with AI
Bekijk de slides van onze sessie Enhancing Modern Workplace Efficiency op Experts Live 2024.
原版一比一利兹贝克特大学毕业证(LeedsBeckett毕业证书)如何办理
原版制作【微信:41543339】【利兹贝克特大学毕业证(LeedsBeckett毕业证书)】【微信:41543339】《成绩单、外壳、雅思、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信41543339】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信41543339】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
The Ipsos - AI - Monitor 2024 Report.pdf
According to Ipsos AI Monitor's 2024 report, 65% Indians said that products and services using AI have profoundly changed their daily life in the past 3-5 years.
一比一原版(Unimelb毕业证书)墨尔本大学毕业证如何办理
原版制作【微信:41543339】【(Unimelb毕业证书)墨尔本大学毕业证】【微信:41543339】《成绩单、外壳、雅思、offer、留信学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同进口机器一比一制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信41543339】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信41543339】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
4th Modern Marketing Reckoner by MMA Global India & Group M: 60+ experts on W...
The Modern Marketing Reckoner (MMR) is a comprehensive resource packed with POVs from 60+ industry leaders on how AI is transforming the 4 key pillars of marketing – product, place, price and promotions.
Analysis insight about a Flyball dog competition team's performance
Insight of my analysis about a Flyball dog competition team's last year performance. Find more: https://github.com/rolandnagy-ds/flyball_race_analysis/tree/main
"Financial Odyssey: Navigating Past Performance Through Diverse Analytical Lens"
Embark on a captivating financial journey with 'Financial Odyssey,' our hackathon project. Delve deep into the past performance of two companies as we employ an array of financial statement analysis techniques. From ratio analysis to trend analysis, uncover insights crucial for informed decision-making in the dynamic world of finance."
Predictably Improve Your B2B Tech Company's Performance by Leveraging Data
Harness the power of AI-backed reports, benchmarking and data analysis to predict trends and detect anomalies in your marketing efforts.
Peter Caputa, CEO at Databox, reveals how you can discover the strategies and tools to increase your growth rate (and margins!).
From metrics to track to data habits to pick up, enhance your reporting for powerful insights to improve your B2B tech company's marketing.
- - -
This is the webinar recording from the June 2024 HubSpot User Group (HUG) for B2B Technology USA.
Watch the video recording at https://youtu.be/5vjwGfPN9lw
Sign up for future HUG events at https://events.hubspot.com/b2b-technology-usa/
Intelligence supported media monitoring in veterinary medicine
Media monitoring in veterinary medicien
Learn SQL from basic queries to Advance queries
Dive into the world of data analysis with our comprehensive guide on mastering SQL! This presentation offers a practical approach to learning SQL, focusing on real-world applications and hands-on practice. Whether you're a beginner or looking to sharpen your skills, this guide provides the tools you need to extract, analyze, and interpret data effectively.
Key Highlights:
Foundations of SQL: Understand the basics of SQL, including data retrieval, filtering, and aggregation.
Advanced Queries: Learn to craft complex queries to uncover deep insights from your data.
Data Trends and Patterns: Discover how to identify and interpret trends and patterns in your datasets.
Practical Examples: Follow step-by-step examples to apply SQL techniques in real-world scenarios.
Actionable Insights: Gain the skills to derive actionable insights that drive informed decision-making.
Join us on this journey to enhance your data analysis capabilities and unlock the full potential of SQL. Perfect for data enthusiasts, analysts, and anyone eager to harness the power of data!
#DataAnalysis #SQL #LearningSQL #DataInsights #DataScience #Analytics
End-to-end pipeline agility - Berlin Buzzwords 2024
We describe how we achieve high change agility in data engineering by eliminating the fear of breaking downstream data pipelines through end-to-end pipeline testing, and by using schema metaprogramming to safely eliminate boilerplate involved in changes that affect whole pipelines.
A quick poll on agility in changing pipelines from end to end indicated a huge span in capabilities. For the question "How long time does it take for all downstream pipelines to be adapted to an upstream change," the median response was 6 months, but some respondents could do it in less than a day. When quantitative data engineering differences between the best and worst are measured, the span is often 100x-1000x, sometimes even more.
A long time ago, we suffered at Spotify from fear of changing pipelines due to not knowing what the impact might be downstream. We made plans for a technical solution to test pipelines end-to-end to mitigate that fear, but the effort failed for cultural reasons. We eventually solved this challenge, but in a different context. In this presentation we will describe how we test full pipelines effectively by manipulating workflow orchestration, which enables us to make changes in pipelines without fear of breaking downstream.
Making schema changes that affect many jobs also involves a lot of toil and boilerplate. Using schema-on-read mitigates some of it, but has drawbacks since it makes it more difficult to detect errors early. We will describe how we have rejected this tradeoff by applying schema metaprogramming, eliminating boilerplate but keeping the protection of static typing, thereby further improving agility to quickly modify data pipelines without fear.
Recently uploaded (20)
Beyond the Basics of A/B Tests: Highly Innovative Experimentation Tactics You...
Beyond the Basics of A/B Tests: Highly Innovative Experimentation Tactics You...
Build applications with generative AI on Google Cloud
Build applications with generative AI on Google Cloud
ViewShift: Hassle-free Dynamic Policy Enforcement for Every Data Lake
ViewShift: Hassle-free Dynamic Policy Enforcement for Every Data Lake
4th Modern Marketing Reckoner by MMA Global India & Group M: 60+ experts on W...
4th Modern Marketing Reckoner by MMA Global India & Group M: 60+ experts on W...
DATA COMMS-NETWORKS YR2 lecture 08 NAT & CLOUD.docx
DATA COMMS-NETWORKS YR2 lecture 08 NAT & CLOUD.docx
Analysis insight about a Flyball dog competition team's performance
Analysis insight about a Flyball dog competition team's performance
"Financial Odyssey: Navigating Past Performance Through Diverse Analytical Lens"
"Financial Odyssey: Navigating Past Performance Through Diverse Analytical Lens"
Predictably Improve Your B2B Tech Company's Performance by Leveraging Data
Predictably Improve Your B2B Tech Company's Performance by Leveraging Data
Intelligence supported media monitoring in veterinary medicine
Intelligence supported media monitoring in veterinary medicine
End-to-end pipeline agility - Berlin Buzzwords 2024
End-to-end pipeline agility - Berlin Buzzwords 2024
Fall Presentation 2021-2022Atch.pptx
- 1. MEM/ECE-491 : Senior Design Proposal Presentation Group Number: ECE-xx Member A Member B Member C Member D Advisor: Dr. X Co-Advisor: Dr. Z Project Title Lab or Company Logo (if working with any such organization)
- 2. Lab or Company Logo (if working with any such organization) Introduction (1 to 3 slides) • Give a brief introduction of the field of the problem. – i.e. There is a need to quickly measure radiation levels around a Nuclear Reactor in the event of an Emergency situation • Specify the things that need to be addressed with regards to solving or improving an existing solution to the problem. – The current method is xxxx, it takes over 2 hours to get reliable data and requires special processing….. • Who are the stakeholders? What are their needs? 2
- 3. Lab or Company Logo (if working with any such organization) Background (3 to 6 slides) • In this section specify the hardware and software requirements of your project. – Describe any specific standards or regulations that must be met (CE, UL, software standards TCPIP etc) -keep in mind that for any standards you specify, you will be questioned on why they must be met and how do you plan to meet them. • Briefly describe the results of any background search you have performed (i.e. existing products that solve the problem, existing patents, etc.), that will help the committee get a better understanding of the concepts involved in your project and mainly your understanding of those concepts. 3
- 4. Lab or Company Logo (if working with any such organization) Problem Statement (1 slide) • Clearly state the problem being worked on. (Make sure it is concise and clear. This should encompass the main issues being addressed) • E.g. We plan to build a preprogramed UAV with various radiation detection sensors to visit a variety of predefined key locations, take measurements and send the information back to a central server for display and analysis 4
- 5. Lab or Company Logo (if working with any such organization) Design Description (3-6 slides) • Describe the conceptual options developed to meet the specs. • Describe your concept evaluation process (design Matrices) 5
- 6. Lab or Company Logo (if working with any such organization) Proposed Solution/Methods (1 to 6 slides) • Provide a detailed description of your chosen design approach • You MUST provide a block diagram, system diagram, Software architecture diagram, etc or some form of pictorial representation of the proposed solution • Operational description of your proposed solution • Discuss why your solution is feasible and can be built by your team 6
- 7. Lab or Company Logo (if working with any such organization) Potential Impacts (1-4 slides) • State what are the Economics, Environmental, Social and Ethical impacts that you think that solving your proposed problem and your particular solution to the proposed problem will have. • DO NOT WRITE THAT YOUR PROJECT HAS NO IMPACTS for a given context – work with your advisor to answer this question, draw form your VSD activity 7
- 8. Lab or Company Logo (if working with any such organization) Team Member Responsibility (1 slide) • State what were and will be the responsibilities of each of the team members. – table might be useful • You might be questioned on why a certain member has been allocated a certain duty. • We will also examine if all group member are share similar workload and their skills are being utilized effectively. 8
- 9. 9 Budget Out of Pocket Budget Tools Test Equipments Arduino $40.00 FPGA board $50.00 Rasbery Pi $40.00 Amazon Web Services $60.00 Expendables $50.00 Contingecy Cost (30%) $72.00 Subtotal $312.00 This is actually what you spent so far or plan to spend, do not get down to level of 10 cent resistors or 6 inch lengths of wire. Include details of external funding (Dewar, Advisor grant, etc).
- 10. Lab or Company Logo (if working with any such organization) Fall Progress (1 to 4 slides) • State the work you have carried out towards attaining your stated deliverables and state the results you have obtained. – Reference to your deliverables – Videos or demos are good 10
- 11. Lab or Company Logo (if working with any such organization) Time Line (1 slide) • The timeline should be for the period of nine months and it must include the various significant tasks that your group will carry out and when. Also overlay completed tasks and the time taken to complete them. • Remember that writing reports making presentations are also important part of the Senior Design Process, as such they need to be represented in your timeline. • This should be a Gantt Chart. 11
- 12. Lab or Company Logo (if working with any such organization) In summary 12 • What distinguishing features of your proposed solution? • How are you creating value for the customer or stakeholder?
- 13. Supplemental Slides • Anything else that may be important • Anticipate questions and include things like schematic, movie of something completed or some other results/ charts/ graphs • References/Appendices 13