Fabrication of flexible tipper system by 3 axis pneumatic modern trailer
1. ECWAY TECHNOLOGIES
IEEE PROJECTS & SOFTWARE DEVELOPMENTS
OUR OFFICES @ CHENNAI / TRICHY / KARUR / ERODE / MADURAI / SALEM / COIMBATORE
OUR OFFICES @ CHENNAI / TRICHY
ERODE / MADURAI / SALEM / COIMBATORE
BANGALORE / HYDRABAD
BANGALORE / HYDRABAD
CELL: +91 98949 17187, +91 875487 1111 / 2111 / 3111 / 4111 / 5111 / 6111 / 8111
CELL: +91 98949 17187, +91 875487 1111 / 2111 / 3111 / 4111 / 5111 / 6111 / 8111
VISIT: www.ecwaytechnologies.com | www.ecwayprojects.com
VISIT: www.ecwaytechnologies.com | www.ecwayprojects.com
Mail to: ecwaytechnologies@gmail.com | ecwayembedded@gmail.com
Mail to: ecwaytechnologies@gmail.com | ecwayembedded@gmail.com
FABRICATION OF FLEXIBLE TIPPER SYSTEM BY 3
AXIS PNEUMATIC MODERN TRAILER
Mechanical
engineering
ABSTRACT
without production
and
manufacturing
is
meaningless and inseparable. Production and manufacturing process deals with
conversion of raw materials inputs to finished products as per required dimensions
specifications and efficiently using recent technology
Pneumatic three axis trailer are used mainly in construction site as well in industrial site
where the place is very less ,here we can unload the material at any side of the trailer
.where as in ordinary unloading done at back side only here we can unload the load on
left side, right side and backside also, this system is totally operated with the pneaaumatic
components with linkage mechanism
In this project, the Control Valve is used to activate/deactivate the Air input.
The Valve is ‘ON’ the compressed air goes to the pneumatic cylinder. And then
pushes the pneumatic cylinder, so that the Lifting is applied at the time of Valve in
“ON” position Each position is actuated with separate valves, but condition is only
one axis is operated at one time of instant .The speed of the pneumatic cylinder is
varied by using flow control valve. This is the way of controlling Lifting speed of
the Trailer
3. Advantages:
• More efficient
• Power can be easily transmission.
• Less loss in transmission.
• Very Easy Holding Process.
Disadvantage
1) Low stability
