Eye movement controlled wheel chair
•Download as PPTX, PDF•
2 likes•109 views
The document presents the design overview, software design, hardware design, mechanical design, safety features, advantages, disadvantages, testing, and results of a project to interface a computer with a microcontroller using a CP2102 chip. The CP2102 converts RS-232 voltage levels to TTL voltage levels and interfaces with the computer's COM port using MATLAB to send and receive single digit data. The design aims to be easy to use, safe, expandable, capable of being built at home, and soon to be a manufactured product. Potential disadvantages include reduced efficiency in dim environments and possible itching or irritations.
Report
Share
Report
Share
Recommended
C 9202
Aditgroup present the different fire alarm detector for the security purpose. Here user gets the Duel Heat detector, Manual call point, Smoke Alarm, Optical smoke detector etc.
I 9301
Aditgroup present the different fire alarm detector for the security purpose. Here user gets the Duel Heat detector, Manual call point, Smoke Alarm, Optical smoke detector etc.
Digitalclock project 2016 with timer 555 & IC 7490 & IC 7474 & 7 segment
This document summarizes the components needed to build a digital clock, including a breadboard for prototyping circuits without soldering. It describes resistors, capacitors, logic gates like AND and OR, a 555 timer integrated circuit for timing functions, decade and binary counters, and BCD to 7-segment decoders/drivers. These components work together to display the time on a 7-segment LED display.
TV Remote control Home Appliances using Arduino(Infrared)
TV Remote control Home Appliances using Arduino(Infrared).
This is a B.tech project.Hope some one may find some use.
Automatic room light controller with bi directional visitor counter using Ard...
This Project Has Two Modules.
First module is '' Visitor Counter " and The Other Module is " Automatic Room Light Controller ".
4 CH AnalogOutput Module - MOD-AO-4
4 ChannelAnalog Output – (12bit- 0-10v/4-20mA)
LED indication for each Outputstatus,error, communication port and power ON
Din rail mount assembly.
DIP switch for Modbus RTU slave configuration
No configuration software needed
CE Mark
Kramer 6502
The 6502 is a 4x1 switcher that takes one of four S/PDIF digital audio inputs and distributes it to two identical outputs while reclocking and equalizing the signal. It can handle sampling rates from 32kHz to 192kHz and has front panel, RS-232, and IR control. Up to three units can fit in a standard 1U rack space with an optional rack adapter.
Kramer 6502
The 6502 is a 4x1 switcher that takes one of four S/PDIF digital audio inputs and distributes it to two identical outputs while reclocking and equalizing the signal. It can handle sampling rates from 32kHz to 192kHz and has front panel, RS-232, and IR control. Up to three units can fit in a standard 1U rack space with an optional rack adapter.
Recommended
C 9202
Aditgroup present the different fire alarm detector for the security purpose. Here user gets the Duel Heat detector, Manual call point, Smoke Alarm, Optical smoke detector etc.
I 9301
Aditgroup present the different fire alarm detector for the security purpose. Here user gets the Duel Heat detector, Manual call point, Smoke Alarm, Optical smoke detector etc.
Digitalclock project 2016 with timer 555 & IC 7490 & IC 7474 & 7 segment
This document summarizes the components needed to build a digital clock, including a breadboard for prototyping circuits without soldering. It describes resistors, capacitors, logic gates like AND and OR, a 555 timer integrated circuit for timing functions, decade and binary counters, and BCD to 7-segment decoders/drivers. These components work together to display the time on a 7-segment LED display.
TV Remote control Home Appliances using Arduino(Infrared)
TV Remote control Home Appliances using Arduino(Infrared).
This is a B.tech project.Hope some one may find some use.
Automatic room light controller with bi directional visitor counter using Ard...
This Project Has Two Modules.
First module is '' Visitor Counter " and The Other Module is " Automatic Room Light Controller ".
4 CH AnalogOutput Module - MOD-AO-4
4 ChannelAnalog Output – (12bit- 0-10v/4-20mA)
LED indication for each Outputstatus,error, communication port and power ON
Din rail mount assembly.
DIP switch for Modbus RTU slave configuration
No configuration software needed
CE Mark
Kramer 6502
The 6502 is a 4x1 switcher that takes one of four S/PDIF digital audio inputs and distributes it to two identical outputs while reclocking and equalizing the signal. It can handle sampling rates from 32kHz to 192kHz and has front panel, RS-232, and IR control. Up to three units can fit in a standard 1U rack space with an optional rack adapter.
Kramer 6502
The 6502 is a 4x1 switcher that takes one of four S/PDIF digital audio inputs and distributes it to two identical outputs while reclocking and equalizing the signal. It can handle sampling rates from 32kHz to 192kHz and has front panel, RS-232, and IR control. Up to three units can fit in a standard 1U rack space with an optional rack adapter.
Smart home arduino
This is a document showing how Arduino can be used to control lights, fans or other electrical devices using a smart phone. We hare used Arduino UNO with HC-05 bluetooth module. Here we operate LED lights. This is helpful to initially understand how to deal with Arduino and bluetooth. In my next project I will show to operate 230v current to opearte lights and fans at our home.
Remote Controlled Home Appliance
Remote Controlled Home Appliance is a microcontroller based wireless system. we choose infrared to design the remote control system for home appliances for our project. Here we used IR Transmitter (Commonly Used remotes for home appliances) and IR Sensor Modules The major aim of this project is to deliver the technology of modern world in our country at low price to general people. The overall performance of the power supply (PS) is excellent as a constant supply to drive any small load
cellphone based device control
This project involves developing a system to remotely control home appliances using a cellular phone. The system uses a microcontroller and DTMF tones. A caller uses their mobile phone to call a receiver phone located at the control unit. When the call is answered, the caller presses keys to send DTMF tones corresponding to devices they want to control. The tones are decoded and sent to the microcontroller to control appliances. The project was successfully completed and provides a low-cost way to remotely control devices using a mobile phone.
Smart Implant- Fibaro- Z-Wave
This document provides an operating manual for the FIBARO Smart Implant device, which allows connecting various wired sensors to a Z-Wave network. The manual describes:
1) Main features of the device including supporting up to 6 temperature sensors and 2 each of analog, binary, and button inputs.
2) Installation instructions for connecting different sensor types like temperature, humidity, analog, binary, and buttons.
3) Instructions for adding the device to a Z-Wave network manually or via SmartStart and removing it from the network.
4) Details on the device's operation including button functions, menus, resetting, and testing.
Controlling home appliances using ir modules
This document summarizes a major project to control home appliances using infrared (IR) modules. The project aims to reduce the need for manual switching of devices like motors, fans, and bulbs. It employs a transmitter section that can be carried by a user to send IR signals within range to a receiver section. The receiver section is connected to devices and uses a decoder chip to receive encoded signals from the transmitter, which are then used to operate relays and control the connected appliances remotely. The system allows single-person control of devices from a distance, is low cost, small in size, and has applications for industrial, educational, personal, and assistive use.
Super sensitive industrial security system ppt
This document describes a security alarm system that monitors a diamond in a museum using infrared sensors. The system can monitor up to 4 sensors and will light an LED and sound an alarm if a sensor is triggered, indicating unauthorized access. It also sends a message to a programmed mobile phone. The system is designed using an Intel 8052 microcontroller, infrared sensors, an LCD display, buzzers and a Bluetooth module. It provides effective security monitoring of restricted areas.
RF Digital Rfd21733 Flyer
This document describes a small wireless module that is interference tolerant, has a built-in antenna, supports various wireless modes like RFID and serial communication, has a long range of 500 feet, low power usage, and can be easily integrated into applications through a header that is compatible with breadboards.
Smart laptop docking station
This document describes a smart electronic laptop docking station with an anti-theft alarm. It uses two integrated circuits - an IC1 CNY70 opto-sensor that detects when a laptop is removed from the docking station based on infrared light reflection, and an IC2 CD4060 binary counter that triggers an alarm after a few seconds delay. When the laptop is removed, the opto-sensor cuts off, the counter starts oscillating, and after a delay it activates a buzzer and LED to alert of potential theft. The docking station could be modified to also protect externally connected devices.
102642452 infrared-remote-switch-project-report
This project report describes an infrared remote control system to switch electrical devices on and off. The system uses an AT89C2051 microcontroller to receive infrared signals from a remote control via an infrared receiver. The microcontroller then controls up to six electrical devices using ULN2003 transistors. The system has a range of up to 10 meters and works using the Phillips RC5 infrared communication protocol. It was developed by four electrical engineering students at Assam Engineering College as their final year project.
TH-GUARD II electric fence energizer
TH-GUARD II security electric fence energizer,with 8KV pulse voltage,remote control function,single zone,is ideal for home security protection.
Contact for more detail:dragon@tonghertech.com/www.tonghertech.com
Controlling home appliances using remote (2)
This document describes a circuit designed to control home or industrial appliances using a remote control. The circuit uses an IR receiver module to detect signals from the remote and a NE555 timer IC to trigger a relay that switches an appliance on or off. When a remote button is pressed, the IR receiver detects the 38kHz IR signal and activates the timer IC, toggling the relay and appliance power. This allows controlling appliances from up to 10 meters away, reducing effort and saving time compared to manual switching. Potential applications include industrial equipment and home devices.
Akash uid ppt3
This project aims to develop a smart system to identify stolen cars at checkpoints using radio frequency identification (RFID) technology. The system involves issuing each car a unique identification code stored on a silicon chip installed under the vehicle. When a car passes a checkpoint, a passive RFID reader will generate a 125 kHz frequency to read the chip's ID code. If the code is not in the system's database, the car would be identified as stolen. The key components used are an RFID reader, microcontroller, LCD display, LEDs, and EEPROM memory. The system works by encoding each car's unique ID number and storing it on an RFID tag installed on the car.
Ir switch & remote control
This document describes an infrared (IR) switch and remote control circuit. It discusses how IR light works and its applications, including in TV remotes. The circuit uses an IR detector tuned to detect pulses at 38kHz from an IR LED in the remote control. The detector circuit has four stages: 1) IR detection, 2) buffering the signal, 3) generating an on/off command, and 4) toggling an LED switch on or off. The remote control circuit uses a 555 timer oscillator to pulse the IR LED at 38kHz, matching the detector. Pressing the remote will toggle the LED switch.
Controlling a home appliance using IR remote
This document describes a circuit that allows home appliances to be controlled using an infrared remote control. The circuit consists of a transmitter that sends infrared signals using a 555 timer chip and an IR LED. The receiver uses a TSOP1738 IR sensor and CD4017 counter IC to receive and decode the IR signals, then trigger a relay to turn the appliance on or off. The circuit was designed to have a range of up to 10 meters and provide a low-cost way to remotely control appliances like lamps, fans, and radios.
Kalyan abstrct googl
This document describes a project to control electrical appliances in a home remotely using a microcontroller and PC. A microcontroller like the AT89S52 is used to interface with devices via relays and receive commands from a PC through an RS-232 serial connection. The MAX232 chip converts signals between the RS-232 and microcontroller levels. Based on commands from the PC, the microcontroller can turn appliances on and off and send back status updates. This allows remote control and monitoring of devices for applications like smart homes and industrial automation.
Microcontroller based digital code lock report 2
The document is a project report on a microcontroller based digital code lock. It describes the design and implementation of an access control system using an AT89C2051 microcontroller. The system uses a keypad to enter a password, which is checked by the microcontroller against a stored password. If the passwords match, a relay is activated to open the door. If an incorrect password is entered more than three times, an alarm is activated. The microcontroller can also automatically open the door when the user returns based on laser sensor detection.
Remote control for home appliances
This circuit allows remote control of home appliances like lamps or fans using an IR TSOP1738 sensor and CD4017 decade counter IC. The IR signal from the remote is received by the TSOP1738 and amplified by a transistor before being fed to the CD4017 IC. The CD4017 switches between red and green LEDs to indicate appliance power state and uses another transistor to drive a relay that physically turns the appliance on or off by connecting it to the main power supply. The circuit can be operated remotely from up to 10 meters away.
Project report on the Digital clock using RTC and microcontroller 8051
1. The document describes a project report for a digital clock circuit with time and alarm functions. The circuit uses an RTC chip to accurately display the time and date. It can set the time and alarm and displays it on an LCD.
2. The circuit diagram shows how the RTC connects to the microcontroller and how it continuously reads the RTC data and processes it to display the correct time on the LCD. It uses buttons to set the time and alarm.
3. The project aims to design an accurate digital clock with functions to set the time and alarm using common electronic components like a microcontroller, RTC, LCD, and buttons.
CONTROLLING HOME APPLIANCES USING REMOTE(1)
This document describes a home appliance control system that allows appliances to be controlled remotely using a TV remote. It consists of an IR receiver that receives signals from the remote and decodes the RC5 protocol. A microcontroller then determines which appliance is being controlled and sends signals to a relay driver IC to operate the appropriate relay and control appliances like lights and fans. The system provides remote control of appliances up to 10 meters away, allows easy control and monitoring, reduces human effort, and saves time and energy.
37 en-1-especificaciones
This document describes 28 sensor modules that are compatible with Arduino boards. The modules include sensors for temperature, shock, magnetic fields, buttons, infrared transmission/reception, buzzers, lasers, LEDs, light blocking, dual color LEDs, analog temperature, humidity, tilt switches, reed switches, joysticks, Hall sensors, flames, and more. Each sensor module is accompanied by a brief description and link to Arduino sample code.
203 212
1) The document describes a smart card based toll gate automated system using an 8051 microcontroller. It includes a block diagram of the system and descriptions of the main components.
2) The system uses a smart card reader interfaced to a microcontroller to read information from a smart card and deduct toll amounts. A keypad is used to enter amounts. An LCD displays statuses and prompts.
3) Simulation results show steps to create and simulate the project in Keil uVision software, including selecting device components, building the project, and adding source files.
Smard card123
This document discusses a smart card based toll gate automated system. It proposes using smart cards instead of cash to pay tolls. The system would use a microcontroller, smart card reader, LCD display and keypad. Drivers would recharge their smart cards with funds and insert their card at the toll gate, where the amount would be deducted. This avoids the need to carry cash and improves security. The system was simulated using Keil μVision software. It provides a block diagram of the system components and describes the roles of the microcontroller and MAX232 chip in interfacing with the smart card reader.
More Related Content
What's hot
Smart home arduino
This is a document showing how Arduino can be used to control lights, fans or other electrical devices using a smart phone. We hare used Arduino UNO with HC-05 bluetooth module. Here we operate LED lights. This is helpful to initially understand how to deal with Arduino and bluetooth. In my next project I will show to operate 230v current to opearte lights and fans at our home.
Remote Controlled Home Appliance
Remote Controlled Home Appliance is a microcontroller based wireless system. we choose infrared to design the remote control system for home appliances for our project. Here we used IR Transmitter (Commonly Used remotes for home appliances) and IR Sensor Modules The major aim of this project is to deliver the technology of modern world in our country at low price to general people. The overall performance of the power supply (PS) is excellent as a constant supply to drive any small load
cellphone based device control
This project involves developing a system to remotely control home appliances using a cellular phone. The system uses a microcontroller and DTMF tones. A caller uses their mobile phone to call a receiver phone located at the control unit. When the call is answered, the caller presses keys to send DTMF tones corresponding to devices they want to control. The tones are decoded and sent to the microcontroller to control appliances. The project was successfully completed and provides a low-cost way to remotely control devices using a mobile phone.
Smart Implant- Fibaro- Z-Wave
This document provides an operating manual for the FIBARO Smart Implant device, which allows connecting various wired sensors to a Z-Wave network. The manual describes:
1) Main features of the device including supporting up to 6 temperature sensors and 2 each of analog, binary, and button inputs.
2) Installation instructions for connecting different sensor types like temperature, humidity, analog, binary, and buttons.
3) Instructions for adding the device to a Z-Wave network manually or via SmartStart and removing it from the network.
4) Details on the device's operation including button functions, menus, resetting, and testing.
Controlling home appliances using ir modules
This document summarizes a major project to control home appliances using infrared (IR) modules. The project aims to reduce the need for manual switching of devices like motors, fans, and bulbs. It employs a transmitter section that can be carried by a user to send IR signals within range to a receiver section. The receiver section is connected to devices and uses a decoder chip to receive encoded signals from the transmitter, which are then used to operate relays and control the connected appliances remotely. The system allows single-person control of devices from a distance, is low cost, small in size, and has applications for industrial, educational, personal, and assistive use.
Super sensitive industrial security system ppt
This document describes a security alarm system that monitors a diamond in a museum using infrared sensors. The system can monitor up to 4 sensors and will light an LED and sound an alarm if a sensor is triggered, indicating unauthorized access. It also sends a message to a programmed mobile phone. The system is designed using an Intel 8052 microcontroller, infrared sensors, an LCD display, buzzers and a Bluetooth module. It provides effective security monitoring of restricted areas.
RF Digital Rfd21733 Flyer
This document describes a small wireless module that is interference tolerant, has a built-in antenna, supports various wireless modes like RFID and serial communication, has a long range of 500 feet, low power usage, and can be easily integrated into applications through a header that is compatible with breadboards.
Smart laptop docking station
This document describes a smart electronic laptop docking station with an anti-theft alarm. It uses two integrated circuits - an IC1 CNY70 opto-sensor that detects when a laptop is removed from the docking station based on infrared light reflection, and an IC2 CD4060 binary counter that triggers an alarm after a few seconds delay. When the laptop is removed, the opto-sensor cuts off, the counter starts oscillating, and after a delay it activates a buzzer and LED to alert of potential theft. The docking station could be modified to also protect externally connected devices.
102642452 infrared-remote-switch-project-report
This project report describes an infrared remote control system to switch electrical devices on and off. The system uses an AT89C2051 microcontroller to receive infrared signals from a remote control via an infrared receiver. The microcontroller then controls up to six electrical devices using ULN2003 transistors. The system has a range of up to 10 meters and works using the Phillips RC5 infrared communication protocol. It was developed by four electrical engineering students at Assam Engineering College as their final year project.
TH-GUARD II electric fence energizer
TH-GUARD II security electric fence energizer,with 8KV pulse voltage,remote control function,single zone,is ideal for home security protection.
Contact for more detail:dragon@tonghertech.com/www.tonghertech.com
Controlling home appliances using remote (2)
This document describes a circuit designed to control home or industrial appliances using a remote control. The circuit uses an IR receiver module to detect signals from the remote and a NE555 timer IC to trigger a relay that switches an appliance on or off. When a remote button is pressed, the IR receiver detects the 38kHz IR signal and activates the timer IC, toggling the relay and appliance power. This allows controlling appliances from up to 10 meters away, reducing effort and saving time compared to manual switching. Potential applications include industrial equipment and home devices.
Akash uid ppt3
This project aims to develop a smart system to identify stolen cars at checkpoints using radio frequency identification (RFID) technology. The system involves issuing each car a unique identification code stored on a silicon chip installed under the vehicle. When a car passes a checkpoint, a passive RFID reader will generate a 125 kHz frequency to read the chip's ID code. If the code is not in the system's database, the car would be identified as stolen. The key components used are an RFID reader, microcontroller, LCD display, LEDs, and EEPROM memory. The system works by encoding each car's unique ID number and storing it on an RFID tag installed on the car.
Ir switch & remote control
This document describes an infrared (IR) switch and remote control circuit. It discusses how IR light works and its applications, including in TV remotes. The circuit uses an IR detector tuned to detect pulses at 38kHz from an IR LED in the remote control. The detector circuit has four stages: 1) IR detection, 2) buffering the signal, 3) generating an on/off command, and 4) toggling an LED switch on or off. The remote control circuit uses a 555 timer oscillator to pulse the IR LED at 38kHz, matching the detector. Pressing the remote will toggle the LED switch.
Controlling a home appliance using IR remote
This document describes a circuit that allows home appliances to be controlled using an infrared remote control. The circuit consists of a transmitter that sends infrared signals using a 555 timer chip and an IR LED. The receiver uses a TSOP1738 IR sensor and CD4017 counter IC to receive and decode the IR signals, then trigger a relay to turn the appliance on or off. The circuit was designed to have a range of up to 10 meters and provide a low-cost way to remotely control appliances like lamps, fans, and radios.
Kalyan abstrct googl
This document describes a project to control electrical appliances in a home remotely using a microcontroller and PC. A microcontroller like the AT89S52 is used to interface with devices via relays and receive commands from a PC through an RS-232 serial connection. The MAX232 chip converts signals between the RS-232 and microcontroller levels. Based on commands from the PC, the microcontroller can turn appliances on and off and send back status updates. This allows remote control and monitoring of devices for applications like smart homes and industrial automation.
Microcontroller based digital code lock report 2
The document is a project report on a microcontroller based digital code lock. It describes the design and implementation of an access control system using an AT89C2051 microcontroller. The system uses a keypad to enter a password, which is checked by the microcontroller against a stored password. If the passwords match, a relay is activated to open the door. If an incorrect password is entered more than three times, an alarm is activated. The microcontroller can also automatically open the door when the user returns based on laser sensor detection.
Remote control for home appliances
This circuit allows remote control of home appliances like lamps or fans using an IR TSOP1738 sensor and CD4017 decade counter IC. The IR signal from the remote is received by the TSOP1738 and amplified by a transistor before being fed to the CD4017 IC. The CD4017 switches between red and green LEDs to indicate appliance power state and uses another transistor to drive a relay that physically turns the appliance on or off by connecting it to the main power supply. The circuit can be operated remotely from up to 10 meters away.
Project report on the Digital clock using RTC and microcontroller 8051
1. The document describes a project report for a digital clock circuit with time and alarm functions. The circuit uses an RTC chip to accurately display the time and date. It can set the time and alarm and displays it on an LCD.
2. The circuit diagram shows how the RTC connects to the microcontroller and how it continuously reads the RTC data and processes it to display the correct time on the LCD. It uses buttons to set the time and alarm.
3. The project aims to design an accurate digital clock with functions to set the time and alarm using common electronic components like a microcontroller, RTC, LCD, and buttons.
CONTROLLING HOME APPLIANCES USING REMOTE(1)
This document describes a home appliance control system that allows appliances to be controlled remotely using a TV remote. It consists of an IR receiver that receives signals from the remote and decodes the RC5 protocol. A microcontroller then determines which appliance is being controlled and sends signals to a relay driver IC to operate the appropriate relay and control appliances like lights and fans. The system provides remote control of appliances up to 10 meters away, allows easy control and monitoring, reduces human effort, and saves time and energy.
37 en-1-especificaciones
This document describes 28 sensor modules that are compatible with Arduino boards. The modules include sensors for temperature, shock, magnetic fields, buttons, infrared transmission/reception, buzzers, lasers, LEDs, light blocking, dual color LEDs, analog temperature, humidity, tilt switches, reed switches, joysticks, Hall sensors, flames, and more. Each sensor module is accompanied by a brief description and link to Arduino sample code.
What's hot (20)
Project report on the Digital clock using RTC and microcontroller 8051
Project report on the Digital clock using RTC and microcontroller 8051
Similar to Eye movement controlled wheel chair
203 212
1) The document describes a smart card based toll gate automated system using an 8051 microcontroller. It includes a block diagram of the system and descriptions of the main components.
2) The system uses a smart card reader interfaced to a microcontroller to read information from a smart card and deduct toll amounts. A keypad is used to enter amounts. An LCD displays statuses and prompts.
3) Simulation results show steps to create and simulate the project in Keil uVision software, including selecting device components, building the project, and adding source files.
Smard card123
This document discusses a smart card based toll gate automated system. It proposes using smart cards instead of cash to pay tolls. The system would use a microcontroller, smart card reader, LCD display and keypad. Drivers would recharge their smart cards with funds and insert their card at the toll gate, where the amount would be deducted. This avoids the need to carry cash and improves security. The system was simulated using Keil μVision software. It provides a block diagram of the system components and describes the roles of the microcontroller and MAX232 chip in interfacing with the smart card reader.
Pc to pc optical fiber communication
This document provides information about a circuit using a MAX-232 chip for serial communication between two PCs over a short distance using infrared diodes or longer distances using laser diodes. It includes diagrams of the internal functionality of the MAX-232 chip and the circuit configuration. It also provides theory on the components used, including phototransistors, infrared LEDs, resistors, capacitors, and the 8051 microcontroller. Programming for communication using C language on the 8051 is discussed.
Wireless agro automation system
This document describes a wireless agro device control system designed to help farmers control electrical appliances on their farms wirelessly. The key components include an AT89C51 microcontroller, LAB TOOL-48UXP, MAX232 for converting voltage levels, a MOXA NPORT 5110 serial-to-ethernet converter, D-Link 2100 AP router, and solid state relays. The system allows a client computer to wirelessly control devices connected to the microcontroller via TCP/IP communication over the wireless network.
Fluid Bunkring System Using Bluetooth, ppt
This document outlines a project to develop a microcontroller-based system for battery management. It describes the key components used, including a microcontroller, relays, Bluetooth, sensors and an LCD display. It discusses the design of the printed circuit board, including etching, drilling, and soldering components. The system allows for wireless monitoring and control of fluid levels and transfers between tanks, with potential applications in vehicles, ships, and fuel stations.
Widom smart double_switch_l_en
With the WiDom flush-mounted Double Switch Relay, you can integrate existing electrical installations (e.g. lighting, airing systems…) into a Z-Wave network.
Smart LED Notice Board
This document describes an SMS-based wireless notice board project using a microcontroller and GSM modem. The system allows notices to be displayed on an LED matrix board remotely via SMS messages sent to the GSM modem. The microcontroller receives SMS texts with the GSM modem and MAX232 interface and displays the messages on the LED board. The project uses components like a 89S52 microcontroller, SIM300 GSM modem, 74138 and 74154 decoder ICs, and a 24C02 EEPROM for message storage.
Monitoring temperature rumah dengan display lcd dan recording
This document describes the design and testing of a temperature monitoring system that uses Arduino, LM35 temperature sensors, an LCD display, micro SD shield, and RTC module. The system measures and records temperature data from 4 sensors every minute. The temperatures are displayed on the LCD and saved to a text file on the micro SD card along with date/time from the RTC module. Testing showed the system successfully measured and logged temperature data as designed. The conclusion suggests calibrating the LM35 readings and using terminals to strengthen electrical connections.
Vertx v2000 ds_en
The VertX Access Controllers are network controllers that connect to two access control card readers and control one or two doors. They store access control databases for up to 44,000 cardholders and connect to host software applications over Ethernet to process access requests in real-time. The V2000 model uses a 32-bit processor, has inputs/outputs for doors, alarms and power monitoring, and communicates over TCP/IP.
wiDom Double Smart Switch Z-Wave Module
The document provides instructions for installing and operating a WiDom Smart Double Switch. It allows independent control of two loads and can be operated by both local and remote switches. It includes in Z-Wave networks and supports association groups to control other devices. Configuration parameters allow customizing switch behavior for load control via clicks on external switches and timers.
FRDM-KL46Z_Hands-On_Presentation_v02
The document provides information about a Freescale USB Academy training on ARM Cortex-M0+ using the FRDM-KL46Z board. It includes:
- An overview of the KL46Z256 microcontroller and FRDM-KL46Z board.
- Details of four labs that will be covered: Lab 0 demonstrates a basic "hello world" blinky program; Lab 1 implements a USB HID mouse using the accelerometer; Lab 2 implements a USB CDC serial device; Lab 3 implements a USB mass storage host.
- Information on using mbed.org and the OpenSDA debug interface to program the board.
Project ppt
This document discusses a project to design a touch screen home appliance automation system using powerline communication (PLC). The system would allow controlling devices like lamps from anywhere in a home using PLC over existing power lines. It would make device control easier for children and disabled individuals. The project aims to design transmitter and receiver modules using KQ330 modems connected to a PIC16F877A controller. An Android app would be developed to integrate with the hardware using PLC. Applications include air conditioning, lighting, alarm systems and smart home control without additional wiring infrastructure. Benefits are avoiding separate data cabling and providing transparent data links over existing power lines.
Kramer VS-21HDCP-IR
The VS-21HDCP-IR is a 2x1 HDCP compliant DVI video switcher that switches between two DVI video inputs to a single output. It supports data rates up to 2.25Gbps and is compatible with HDTV signals. It can be controlled via front panel buttons, infrared remote, RS-232, or contact closure and includes EDID and HDCP passthrough.
Lc8805 b 2020 led
The document describes an intelligent LED component called the LC8805B-2020. It is a 2.0x2.0mm SMD LED with control and light emitting circuits integrated into a single chip. Each LED acts as a pixel that can be controlled individually. The LED uses a data protocol for cascading and transmitting signals between pixels without limiting the number of cascaded pixels. It has features such as low power consumption and a long lifespan.
Week 6
1. The weekly report summarizes the progress of team KID-WA Company in designing a product.
2. It discusses using an RS-232 interface with a microcontroller to allow communication between a computer and other devices like barcode scanners through serial ports.
3. The report analyzes the strengths of using RS-232 such as easy programming and high data transmission speed while using few cables, and weaknesses like needing drivers and being more difficult than USB.
BLH Nobel G5 Tech Manual
The G5 Instruments are high performance single-channel weight indicators (PM model, panel mounted) or weight transmitters (RM model, DIN rail mounted) intended for industrial systems.
The basic function is to convert the signals from strain gauge transducers to useful weight information. Transducer excitation is included as well as parameter controlled signal processing, indication of output levels, error supervision and operation of optional external equipment.
As long as the error supervision detects no error, a signal called ‘In process’ is then present but if an error is detected, ‘In process’ will be off and a specific error message will be displayed. ‘In process’ can be set to control any digital output. Note that there are weighing channel specific and instrument specific error detection.
All functions in the G5 Instrument are controlled by set-up parameters. Setting of parameter values can be done from the PM front panel. Set-up of a RM model must be done with a web browser in a PC that is connected to the instrument via Ethernet. Maintenance functions can be accessed locally (PM) or remotely (PM and RM).
IRJET- Automated Elevator-An Attentive Elevator to Elevate using Speech Recog...
This document summarizes a student project to create an automated elevator that can be operated using voice commands. It includes:
1) An introduction describing the motivation to help people with disabilities operate elevators independently using voice recognition.
2) A block diagram and description of the system components including an Arduino microcontroller, Bluetooth module, sensors, LCD display and motor driver.
3) Details of the voice recognition module and how it converts voices into commands to control the elevator motor.
4) The proposed design uses an Arduino board to integrate the voice module and control the motor and display based on voice commands.
Nortech Door Controllers - crc220 network installation
The document discusses options for installing a CRC220 or CRC221 network access controller, including enclosure types, communication methods, and cabling requirements. It provides guidelines for setting up an RS485 or TCP/IP network with the controllers and connecting various components like readers, locks, door contacts and inputs. Wiring diagrams demonstrate proper installation of the controllers, readers, locks and other devices. Information on addressing nodes and configuring inputs is also included.
RFID BASED ACCESS CONTROL SYSTEM
1. The document presents an RFID-based access control system project. It includes an overview of the system's introduction, block diagram, tools and resources used, concepts, circuit diagram, working, video demonstration, applications, advantages, and disadvantages.
2. The system uses an RFID reader to identify users by scanning their RFID tags. If the tag ID matches one stored in the microcontroller's memory, access is granted. Otherwise, access is denied.
3. The project aims to automate access control for security purposes and unauthorized access prevention through contactless identification of users.
Lc8805 b 1515 led
LC8805B 1515 SMD LED ,it is a type smart led embeded in 1515 smd , it is very small , only 1.5*1.5mm .
Similar to Eye movement controlled wheel chair (20)
Monitoring temperature rumah dengan display lcd dan recording
Monitoring temperature rumah dengan display lcd dan recording
IRJET- Automated Elevator-An Attentive Elevator to Elevate using Speech Recog...
IRJET- Automated Elevator-An Attentive Elevator to Elevate using Speech Recog...
Nortech Door Controllers - crc220 network installation
Nortech Door Controllers - crc220 network installation
Recently uploaded
按照学校原版(Greenwich文凭证书)格林威治大学毕业证快速办理
出售买大学文凭【微信:176555708】【(Greenwich毕业证书)格林威治大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(Westminster文凭证书)威斯敏斯特大学毕业证快速办理
加急购买办理毕业证【微信:176555708】【(Westminster毕业证书)威斯敏斯特大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(UST文凭证书)圣托马斯大学毕业证快速办理
精仿办理本科毕业证【微信:176555708】【(UST毕业证书)圣托马斯大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(UQ文凭证书)昆士兰大学毕业证如何办理
毕业原版【微信:176555708】【(UQ毕业证书)昆士兰大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(TheAuckland毕业证书)新西兰奥克兰大学毕业证如何办理
原版定制新西兰奥克兰大学毕业证【微信：176555708】【TheAuckland毕业证书成绩单-学位证】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：176555708】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：176555708】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
学历顾问：微信：176555708
Building a Raspberry Pi Robot with Dot NET 8, Blazor and SignalR - Slides Onl...
In this session delivered at Leeds IoT, I talk about how you can control a 3D printed Robot Arm with a Raspberry Pi, .NET 8, Blazor and SignalR.
I also show how you can use a Unity app on an Meta Quest 3 to control the arm VR too.
You can find the GitHub repo and workshop instructions here;
https://bit.ly/dotnetrobotgithub
一比一原版(IIT毕业证)伊利诺伊理工大学毕业证如何办理
IIT本科学位证成绩单【微信95270640】（伊利诺伊理工大学毕业证成绩单本科学历）Q微信95270640(补办IIT学位文凭证书)伊利诺伊理工大学留信网学历认证怎么办理伊利诺伊理工大学毕业证成绩单精仿本科学位证书硕士文凭证书认证Seneca College diplomaoffer,Transcript办理硕士学位证书造假伊利诺伊理工大学假文凭学位证书制作IIT本科毕业证书硕士学位证书精仿伊利诺伊理工大学学历认证成绩单修改制作，办理真实认证、留信认证、使馆公证、购买成绩单，购买假文凭，购买假学位证，制造假国外大学文凭、毕业公证、毕业证明书、录取通知书、Offer、在读证明、雅思托福成绩单、假文凭、假毕业证、请假条、国际驾照、网上存档可查！
办国外伊利诺伊理工大学伊利诺伊理工大学毕业证offer教育部学历学位认证留信认证大使馆认证留学回国人员证明修改成绩单信封申请学校offer录取通知书在读证明offer letter。
快速办理高仿国外毕业证成绩单：
1伊利诺伊理工大学毕业证+成绩单+留学回国人员证明+教育部学历认证（全套留学回国必备证明材料给父母及亲朋好友一份完美交代）;
2雅思成绩单托福成绩单OFFER在读证明等留学相关材料（申请学校转学甚至是申请工签都可以用到）。
3.毕业证 #成绩单等全套材料从防伪到印刷从水印到钢印烫金高精仿度跟学校原版100%相同。
专业服务请勿犹豫联系我！联系人微信号：95270640诚招代理：本公司诚聘当地代理人员如果你有业余时间有兴趣就请联系我们。
国外伊利诺伊理工大学伊利诺伊理工大学毕业证offer办理过程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。哪里父母对我们的爱和思念为我们的生命增加了光彩给予我们自由追求的力量生活的力量我们也不忘感恩正因为这股感恩的线牵着我们使我们在一年的结束时刻义无反顾的踏上了回家的旅途人们常说父母恩最难回报愿我能以当年爸爸妈妈对待小时候的我们那样耐心温柔地对待我将渐渐老去的父母体谅他们以反哺之心奉敬父母以感恩之心孝顺父母哪怕只为父母换洗衣服为父母喂饭送汤按摩酸痛的腰背握着父母的手扶着他们一步一步地慢慢散步.让我们间
按照学校原版(Birmingham文凭证书)伯明翰大学|学院毕业证快速办理
加急购买全套证件文凭【微信:176555708】【(Birmingham毕业证书)伯明翰大学|学院毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(KCL文凭证书)伦敦国王学院毕业证如何办理
毕业原版【微信:176555708】【(KCL毕业证书)伦敦国王学院毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(UVic文凭证书)维多利亚大学毕业证快速办理
不能毕业办理文凭'毕业证购买'【微信:176555708】【(UVic毕业证书)维多利亚大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(Adelaide文凭证书)阿德莱德大学毕业证如何办理
毕业原版【微信:176555708】【(Adelaide毕业证书)阿德莱德大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(UAL文凭证书)伦敦艺术大学毕业证快速办理
出售假学位证【微信:176555708】【(UAL毕业证书)伦敦艺术大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(KCL文凭证书)伦敦国王学院毕业证快速办理
咨询办理ps毕业证【微信:176555708】【(KCL毕业证书)伦敦国王学院毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(AU文凭证书)英国阿伯丁大学毕业证快速办理
出售毕业典礼【微信:176555708】【(AU毕业证书)英国阿伯丁大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(Columbia文凭证书)哥伦比亚大学毕业证快速办理
快速办理假学位证【微信:176555708】【(Columbia毕业证书)哥伦比亚大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
加急办理美国南加州大学毕业证文凭毕业证原版一模一样
原版一模一样【微信：741003700 】【美国南加州大学毕业证文凭】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
1比1复刻澳洲皇家墨尔本理工大学毕业证本科学位原版一模一样
原版一模一样【微信：741003700 】【澳洲皇家墨尔本理工大学毕业证本科学位】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
LORRAINE ANDREI_LEQUIGAN_GOOGLE CALENDAR
Google Calendar is a versatile tool that allows users to manage their schedules and events effectively. With Google Calendar, you can create and organize calendars, set reminders for important events, and share your calendars with others. It also provides features like creating events, inviting attendees, and accessing your calendar from mobile devices. Additionally, Google Calendar allows you to embed calendars in websites or platforms like SlideShare, making it easier for others to view and interact with your schedules.
按照学校原版(Adelaide文凭证书)阿德莱德大学毕业证快速办理
怎样办理复制【微信:176555708】【(Adelaide毕业证书)阿德莱德大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Recently uploaded (20)
Building a Raspberry Pi Robot with Dot NET 8, Blazor and SignalR - Slides Onl...
Building a Raspberry Pi Robot with Dot NET 8, Blazor and SignalR - Slides Onl...
Production.pptxd dddddddddddddddddddddddddddddddddd
Production.pptxd dddddddddddddddddddddddddddddddddd
Eye movement controlled wheel chair
- 1. Presented by L.VIDYA SASTRI V.SAI POOJITHA
- 2. CONTENTS INTRODUCTION DESIGN OVER VIEW SOFT WARE DESIGN HARD WARE DESIGN MECHANICAL DESIGN SAFTEY FEATURES ADVANTAGES&DIS ADVANTAGES TESTING AND RESULTS CONCLUSION
- 8. CP2102 o CP2102 is a interfacing device between computer and micro controller o CP2102 carry one digit data put on COM port by MATLAB using RS- 232 standard o It also converts RS-232 voltage levels into TTL voltage levels o CP2012 has RXD,TXD,DTR,VBUS,GND,3V3 pins
- 12. o Easy to use o Safe o Expandable – the system is able to control other external devices according to the needs of the user o Capable of being built at home - by an unskilled person o soon to be manufactured product as well
- 13. o 100% efficiency cannot be provided in dim environment o Itching or irritations