The document outlines equipment inspection visits, detailing tasks such as checking current and pressure measurements for two units of equipment. It includes instructions for evaluation, such as noting any abnormalities in motor phases and ensuring the spares list is updated as needed. The information is presented in a structured format with specified visit comments and results.

1. Doc. No. :
Rev. :
Logo Name of company Tel : Rev date :
Address Tel : Page : 1 of 1
E-mail Tel :
Web address
ITEM
Client :
Building ref. :
Area served :
Equipment :
Model :
Equipment asset
no. (serial no.) :
Equipment 2 :
Model 2 :
Equipment asset
no. (serial no.) 2 :
Single or dual :
VISIT 1 VISIT 2 VISIT 3 VISIT 4
Safety permit required ?
Job complete ?
Engineer
Date of visit
SPEC. RESULTS
ITEM NO. TASK UNITS Visit 1 Visit 2 Visit 3 Visit 4
Min. Max.
Unit 1 Unit 2 Unit 1 Unit 2 Unit 1 Unit 2 Unit 1 Unit 2
1 - see note ok ? -
2 -see note Check and record current 10 Amps
3 Check and record pressure 4 8 Bar
4 Check and record second pressure 5 9 Bar
5 Condition ? -
NOTES
1 For item 1, the check should include : bearings, casing, seals, flanges
For item 2, if the motor is 3 phase, note the average reading of the 3 phases. If
2 any individual phase is showing an abnormal reading, this should be noted in
the comments section.
A Compare - filters, bearings, and belts against the spares list
B Notify the office if anything on the spares list needs to be updated.
VISIT 1 -
comments :
VISIT 2 -
comments :
VISIT 3 -
comments :
VISIT 4 -
comments :
2 - Current - UNIT 1 3 - Pressure - UNIT 1 4 - Second pressure - UNIT 1
12 10 10
10 8 8
8 6 6
BAR
BAR
AMPS
6 4 4
4 2 2
2 0 0
Column G Column H Column I Column J Column L Column M Column N Column O
0
Row 80 Row 80 Row 81 Row 80 Row 81
Column B Column C Column D Column E
2 - Current - UNIT 2 3 - Pressure - UNIT 2 4 - Second pressure - UNIT 2
12 10 10
10 8 8
8 6 6
BAR
BAR
AMPS
6 4 4
2 2
4
0 0
2
Column G Column H Column I Column J Column L Column M Column N Column O
0
Row 80 Row 80 Row 81 Row 80 Row 81
Column B Column C Column D Column E
10 10 10 10 4 4 4 4 5 5 5 5
8 8 8 8 9 9 9 9