1. Yahya Saadallah Ayesh
Profile The first rank on the department of mechanical engineering at the
university of Jordan, Jan- 2010.
Personal
Information
 Marital status: Married.
 Nationality: Jordanian.
 Place and date of birth: Amman, 1987.
Education  2013: University of Jordan, Amman.
o Degree: M.Sc, MECHANICAL ENGINEERING.
o GPA: 3.56 on scale of four (Very Good).
 2010: University of Jordan, Amman.
o Degree: B.Sc, MECHANICAL ENGINEERING.
o GPA: 3.75 on scale of four (Excellent).
Professional
Experience
 March 1st
, 2014 -now: Jain International - Consultant Engineers,
Amman / Jordan, carrying out the following duties:
o Working as Senior Mechanical Engineer (Designer).
o Responsibilities:
1- Following up the design team.
2- Providing technical support for mechanical
engineers and drafts men.
3- Performing energy modeling, and designing all
mechanical systems from concept stage to IFC
stage and shop drawing including HVAC systems,
Plumbing systems, and Firefighting systems for
international projects .
Al-Bunayyat Street, Al-Bunayyat,
Amman.
Phone: 00962786540929,
00962776206579
E-mail:
yahyaayesh_vip@yahoo.com

2. 4- Attending design coordination meetings with the
clients, project managers, and contractors, and
participating in site supervision tours.
 Sept. 22th
,2010 – March 1st
, 2014 : Jain International - Consultant
Engineers, Amman / Jordan, carrying out the following duties:
o Working as Mechanical Engineer (Designer).
o Responsible designing all mechanical systems from
concept stage to IFC stage and shop drawing including
HVAC systems, Plumbing systems, and Firefighting
systems for international projects, in addition to
performing energy modeling.
 June. 1st
– Sept. 21th
,2010 : Holy Rock Engineering Office (HREO)-
Consultant Engineers, Amman / Jordan, carrying out the following
duties:
o Working as Mechanical Engineer (Designer).
o Responsible of designing HVAC systems, Plumbing
systems, and Firefighting systems for local, and
international projects.
 Mar. 3rd
- May 31th
: Petra Engineering Industries Co. Ltd.,
Amman / Jordan, carrying out the following duties:
o Working as Mechanical Engineer (Designer) at
Refrigeration Design Section (RDS).
o Responsible of designing different HVAC equipments,
providing consultations for production and maintenance
departments, and performing selection for different
refrigeration tools.
 Jun. 6th
– Aug 1st
, 2009: Engineering training at Holy Rock
Engineering Office – Consultant Engineers / Mechanical Design
Section, and Ministry of Justice Extension Project Site.
Design Projects
 Kazakhestan:
o Talan Towers project- Astana: LEED consultancy, Design
and shop drawings review for all mechanical services, in
addition to being the project energy modeler for LEED
using HAP software for the whole project which consists of
hotel tower operated by RC (Ritz-Carlton), office tower,
and a podium.

3.  Azerbijan:
o Trump Tower project- Baku: Designing all mechanical
systems i.e. HVAC (4 pipe system air cooled chillers, and
boilers), water supply, drainage, and fire protection for the
whole project which consists of hotel operated by TRUMP
and apartments, in addition to providing technical support
and following up the progress of the team, and participating
in the design and coordination meetings in Baku.
o Trump Banquet Hall- Baku:
Designing all mechanical systems i.e. HVAC (4 pipe system
air cooled chillers, and boilers), water supply, drainage, and
fire protection for the whole project which consists of
banquet hall, in addition to providing technical support and
following up the progress of the team, and participating in
the design and coordination meetings in Baku.
 Libya:
o Burj Al- Bahar (BAB) Project- Tripoli: HVAC team leader
for designing the HVAC system (4 pipe system with water
cooled chillers, and boiler) from the concept stage to IFC
stage, the project consists of Office tower, Apartment tower,
Hotel tower operated by Hayat, Hotel Lobby building,
Commercial building, Banquet hall building, and
infrastructure.
 KSA:
o Jabal Omar Development Project (Phase 3): in Makka in
corporation with Drake and Scull International, Redesign
for all mechanical systems, and Shop drawing for the whole
mechanical services. The project consists of four hotel
towers, two of them operated by Helton and the others
operated by Double Tree.
o ITCC (Phase 1): 18 parcels - Riyadh in corporation with
Drake and Scull International, Redesign for all mechanical
systems, and Shop drawing for the whole mechanical
services.
o Albustan project (Hotel, Commercial Center, and
Recreational Center), HVAC systems design.
o CCE hotel project, HVAC systems designed. (VAV system
with static regain duct sizing was conducted by me).
o ITCC project (Phase 1) - Riyadh in corporation with Drake
and Scull International, Redesign for HVAC system, and
Shop drawing for the whole mechanical services for four
towers and six buildings were performed.
The project gains the approval for HVAC calculation of
500000m2
carried by me.

4. o Electrical Substations of Jizan, and Princess Nora, in
corporation with ABB electrical industries Co. Ltd., the
design was per the technical specifications of KSA.
Systems of drainage, and water supply were designed.
 Iraq:
o Iraqi International Academy, in corporation with Al- Ateiah
Group.
Systems of drainage, water supply, fire fighting, and HVAC
were designed.
 Jordan:
Commercial, residential, and Industrial projects.
Systems of drainage, water supply, fire fighting, and HVAC were
designed.
Professional
Memberships
 Member at Jordanian Engineers Association (JEA) since
22/2/2010.
Professional
Activities  Feb. 1st
, 2010: Participant in Energy Management and Auditing
Workshop Organized by ACI, and USAID.
 Nov. 10th
– Nov. 12th
, 2009: Participant in the International
Conference and Exhibition on Green Energy and Sustainability
for Arid Regions and Mediterranean Countries (ICEGES) 2009.
Training Programs
 Energy Modeling Using eQuist, Jordan GBC, a total of (21) hours
from 14/3/2015 to 16/3/2015
 Energy Modeling for LEED Projects, 7group Education Provider, 5
days training, from 19/2/2012 to 23/2/2012
 HVAC Systems Design, Engineers Training Center at Jordan
Engineers Association, a Total of (30) Hours from 30/1/2010 to
20/2/2010.
 Prokon "Concrete Design", Internet and Computer Club,
Deanship of Students Affairs, University of Jordan, a Total of (30)
Hour from 25/1/2009 to 7/2/2009.
 English Conversation – Intermediate Level, Languages Club,
Deanship of Students Affairs, University of Jordan, a Total of (30)
Hour from 22/1/2008 to 9/2/2008.
 Advanced MATLAB 7.0, Internet and Computer Club, Deanship of
Students Affairs, University of Jordan, a Total of (30) Hour from
19/8/2007 to 30/8/2007.
 Introduction to MATLAB, Internet and Computer Club, Deanship
of Students Affairs, University of Jordan, a Total of (30) Hour
from 25/1/2007 to 8/2/2007.
 International Computer Driving License (ICDL), UNESCO Cairo
Office, Issued at 25/8/2005.

5. Courses Highlights  Advanced Heat Transfer. (Master Level)
 Advanced Fluids Mechanics. (Master Level)
 Research Methodology. (Master Level)
 Energy Management and Economics. (Master Level)
 Advanced Finite Element Method. (Master Level)
 Air Conditioning.
 Sanitary Systems Design.
 Refrigeration Systems.
 Energy Conversion.
 Heat Transfer.
Graduation Project
 Master Thesis: Performance Study of a Refrigeration Unit
Powered by a Photovoltaic Generator.
 Under Graduate Project: Panel Heating and Cooling:
Experimental Study for Underfloor Heating and Ceiling Cooling.
Languages  Arabic (native language).
 English: Fluent (Speaking & Writing).
Computer Skills  Hap (Both cooling load and energy modeling).
 eQWEST (Energy modeling).
 Elite (HVAC and Duct size).
 Elite (Fire hydraulic calculations).
 FlactWoods selection software (ABB, and CAPS)
 Auto CAD (Professional).
 MATLAP.
 Pro Engineer.
 Ansys.
Awards Received  Ministry of Higher Education Award for the First Position in the
Academic Departments for the Academic Year 2008-2009.

6.  Ministry of Higher Education Award for the First Position in the
Academic Departments for the Academic Year 2004-2005.
References
o Prof. Mahmoud Ahmad Hammad, Professor of
mechanical Engineering at JU.
E- mail: hammad@ju.edu.jo
o Prof. Naser AL- Huniti, Professor of mechanical
Engineering at JU, 0096265355000/22784.
E-mail: alhuniti@ju.edu.jo
o Other references are available upon request.