Engineering Practice Report
•
1 like•528 views
The document discusses the benefits of exercise for both physical and mental health. Regular exercise can improve cardiovascular health, reduce stress and anxiety, boost mood, and enhance cognitive function. Staying physically active for at least 30 minutes each day is recommended for significant health benefits.
Report
Share
Report
Share
Download to read offline
Recommended
summer practice report(CVE 400)
This document summarizes a civil engineering student's summer internship report on bridge design. The student worked at a engineering consulting firm and learned about the bridge design process. Key steps included: 1) selecting appropriate materials like concrete grades and steel reinforcement; 2) creating 3D models in AutoCAD and SAP2000 based on design drawings; 3) performing structural analysis in SAP2000 to calculate loads, stresses, and displacements; 4) finalizing the design with reinforcement details. The student gained experience in applying codes and specifications to model, analyze, and design an abutment structure with pile foundations.
ARIN 36 Engineering Report
- Engineering at ARIN has grown significantly in 2015 with 13.5 new FTEs added across operations, development, UX and other teams. Hiring has been ongoing but slow.
- Positions are now full across operations, development, software integration and project management, with just two openings remaining for systems administration and security engineering.
- Accomplishments in the last year include deploying RDAP, completing automation projects, improving fault tolerance, and increasing OT&E (operational testing and evaluation) capabilities.
- Usage and transactions of services like ARIN Online, Reg-RWS and Whois continue increasing steadily with migration to IPv6 and other new features underway.
Diapositivas rd-896-07
Este documento presenta un proyecto de planeamiento y presupuesto para la seguridad del evento APEC 2008 que se realizará en Perú. Detalla los diferentes tipos de reuniones que tendrán lugar, las áreas y unidades responsables de la seguridad, y los requerimientos de personal, comunicaciones, vehículos y equipamiento necesarios para implementar los puestos de comando y brindar protección a los líderes y dignatarios asistentes.
Engineering Practice Report
This engineering practice report summarizes Paul Soko's 12-week internship with Copperbelt Energy Corporation in their Emergency Power Department from January to April 2011. During his internship, Paul assisted with tasks like engine swaps, maintenance on gas turbine alternators, investigating faulty fire protection systems, and attending meetings. He gained experience working with instrumentation, reading diagrams, and using equipment like multimeters. The report provides background on Copperbelt Energy's role in providing emergency power and details several specific maintenance and troubleshooting tasks Paul assisted with during his placement.
Design Engineering Report
Hello Friends
Design Engineering Report based on 'Government School' here and also included all 4 canvases here..
' Mind Mapping' on Government School also Here...
APEC
El Foro de Cooperación Económica Asia-Pacífico (APEC) es un foro económico regional que busca promover el crecimiento económico y la prosperidad en la región Asia-Pacífico. En la cumbre de APEC 2016 en Lima, Perú, los 21 miembros acordaron promover el libre comercio en la región, abordar problemas de los trabajadores y pequeñas empresas, y enfocarse en la seguridad alimentaria, el cambio climático y la conectividad digital.
Lighting Project ( Anandita portia MSc. Interior Design)
This document discusses various topics related to lighting design for commercial and residential spaces, including:
- Units of light measurement such as candela, foot-candle, and lux
- Recommended light levels for different activities from hallways to kitchens
- Color temperature and how it relates to lighting appearance
- Different types of lighting fixtures and light sources including incandescent, fluorescent, and LED lamps
- Factors to consider for lighting such as distribution, intensity, and color rendering
Performance tesing coding standards & best practice guidelines v1
This document provides guidelines and best practices for performance testing, including:
- Planning activities such as requirements gathering, environment setup, and test plan development.
- Scripting standards covering project structure, naming conventions, transactions, parameters, and checks.
- Execution including script validation and controller settings.
- Report formatting and graphs for analyzing results.
The guidelines are intended to help performance testers follow industry standards and ensure scripts, data, results and documentation are well-organized and maintained consistently across projects.
Recommended
summer practice report(CVE 400)
This document summarizes a civil engineering student's summer internship report on bridge design. The student worked at a engineering consulting firm and learned about the bridge design process. Key steps included: 1) selecting appropriate materials like concrete grades and steel reinforcement; 2) creating 3D models in AutoCAD and SAP2000 based on design drawings; 3) performing structural analysis in SAP2000 to calculate loads, stresses, and displacements; 4) finalizing the design with reinforcement details. The student gained experience in applying codes and specifications to model, analyze, and design an abutment structure with pile foundations.
ARIN 36 Engineering Report
- Engineering at ARIN has grown significantly in 2015 with 13.5 new FTEs added across operations, development, UX and other teams. Hiring has been ongoing but slow.
- Positions are now full across operations, development, software integration and project management, with just two openings remaining for systems administration and security engineering.
- Accomplishments in the last year include deploying RDAP, completing automation projects, improving fault tolerance, and increasing OT&E (operational testing and evaluation) capabilities.
- Usage and transactions of services like ARIN Online, Reg-RWS and Whois continue increasing steadily with migration to IPv6 and other new features underway.
Diapositivas rd-896-07
Este documento presenta un proyecto de planeamiento y presupuesto para la seguridad del evento APEC 2008 que se realizará en Perú. Detalla los diferentes tipos de reuniones que tendrán lugar, las áreas y unidades responsables de la seguridad, y los requerimientos de personal, comunicaciones, vehículos y equipamiento necesarios para implementar los puestos de comando y brindar protección a los líderes y dignatarios asistentes.
Engineering Practice Report
This engineering practice report summarizes Paul Soko's 12-week internship with Copperbelt Energy Corporation in their Emergency Power Department from January to April 2011. During his internship, Paul assisted with tasks like engine swaps, maintenance on gas turbine alternators, investigating faulty fire protection systems, and attending meetings. He gained experience working with instrumentation, reading diagrams, and using equipment like multimeters. The report provides background on Copperbelt Energy's role in providing emergency power and details several specific maintenance and troubleshooting tasks Paul assisted with during his placement.
Design Engineering Report
Hello Friends
Design Engineering Report based on 'Government School' here and also included all 4 canvases here..
' Mind Mapping' on Government School also Here...
APEC
El Foro de Cooperación Económica Asia-Pacífico (APEC) es un foro económico regional que busca promover el crecimiento económico y la prosperidad en la región Asia-Pacífico. En la cumbre de APEC 2016 en Lima, Perú, los 21 miembros acordaron promover el libre comercio en la región, abordar problemas de los trabajadores y pequeñas empresas, y enfocarse en la seguridad alimentaria, el cambio climático y la conectividad digital.
Lighting Project ( Anandita portia MSc. Interior Design)
This document discusses various topics related to lighting design for commercial and residential spaces, including:
- Units of light measurement such as candela, foot-candle, and lux
- Recommended light levels for different activities from hallways to kitchens
- Color temperature and how it relates to lighting appearance
- Different types of lighting fixtures and light sources including incandescent, fluorescent, and LED lamps
- Factors to consider for lighting such as distribution, intensity, and color rendering
Performance tesing coding standards & best practice guidelines v1
This document provides guidelines and best practices for performance testing, including:
- Planning activities such as requirements gathering, environment setup, and test plan development.
- Scripting standards covering project structure, naming conventions, transactions, parameters, and checks.
- Execution including script validation and controller settings.
- Report formatting and graphs for analyzing results.
The guidelines are intended to help performance testers follow industry standards and ensure scripts, data, results and documentation are well-organized and maintained consistently across projects.
Akash gidwani BSc-Interior Design (Lighting Project )
The document discusses lighting design for commercial and residential spaces. It covers key lighting principles and terms like illumination, lumens, footcandles, lux, efficacy, and color temperature. It describes different types of artificial light sources including incandescent, fluorescent, discharge lamps, and light-emitting diodes (LEDs). It also covers lighting fixtures, luminaires, and different types of lighting like general, task, accent, and decorative lighting.
APEC ARCHITECTS' OPERATION MANUAL
The APEC Architect Project establishes standards and criteria for architects across participating economies in the Asia-Pacific region. It includes an online register of qualified architects divided into sections for each of the 15 participating economies. The Central Council governs the project and delegates responsibilities to Monitoring Committees in each economy and a rotating Secretariat that provides administrative services.
Illumination
This document discusses illumination design and lighting concepts. It defines key lighting terms like luminous flux, illuminance, and luminous efficacy. It describes factors to consider in indoor lighting system design like occupancy, space size and shape, and activity type. The document provides examples of calculating average illuminance and number of light fixtures needed using the lumen method based on IESNA recommendations. It also discusses uniformity of light and relationships between mounting height and fixture spacing.
Lighting Design Project (Mohd. nadeem MSC. Interior Design)
This document discusses lighting design for commercial and residential spaces. It covers various topics such as:
1. The different types of light sources including incandescent, fluorescent, halogen, and LED lamps.
2. Factors that influence light quality like color temperature, color rendering index, and lighting fixtures.
3. Classifications of lighting fixtures and the different types of lighting like general, accent, task, and decorative lighting.
4. Detailed information about incandescent lamps, their construction, advantages, disadvantages and types.
Writing engineering report
This presentation covers the key aspects of writing engineering reports, including report purpose and planning, format and organization, headings and language, visual design, source documentation, and finishing touches. It discusses writing the abstract, introduction, literature review, methodology, results, discussion, and conclusion sections. The presentation emphasizes that reports should inform readers precisely and concisely through clear organization, language, visuals, and citations. Readers should understand the research problem and findings without reading the entire report.
Overview of Lighting Design using Dialux 4.6
This was presented in IIEE-ERCSA's Annual Convention last 14 November 2008 at Meridien Hotel, Al-Khobar, KSA.
Protection of transmission lines(encrypted)
This document discusses protection methods for transmission lines. It describes:
1. Transmission lines require more protective schemes than other equipment due to their long lengths and exposure, making faults more common.
2. Key methods of transmission line protection include time-graded overcurrent protection, differential protection, current-graded overcurrent protection, and distance protection.
3. Distance protection uses impedance relays that can discriminate between faults along the line and those near the end, providing more selective operation than overcurrent protection alone. It describes implementations using simple impedance, reactance, and mho relays.
ILLUMINATION & LIGHTING
This document discusses illumination and lighting schemes. It begins with an introduction to artificial lighting and important terminology like luminous flux and illumination. It then describes different lighting schemes including direct, semi-direct, semi-indirect and indirect lighting. It also discusses the design of indoor lighting schemes and different types of lamps such as incandescent, halogen, discharge and fluorescent lamps. Finally, it covers topics like industrial lighting, street lighting and references used.
Lighting design considerations
The document provides an overview of lighting design considerations for a presentation by Sandal Usmani and Momin Mohammad Zaki. It discusses key factors in lighting design including lighting quantity through task illuminance levels, and lighting quality in terms of light distribution, integration of daylighting, and considerations for the space and workplace environment. Specific design elements are outlined, such as using task and ambient lighting, minimizing light pollution and trespass, providing flexibility, and addressing color appearance, luminance, and glare.
Illumination - Method of calculation
There are three main methods for lighting calculations: 1) Watts per square meter, 2) Lumen or light flux, and 3) Point to point or inverse square law. The lumen method is used to estimate illumination patterns from diffuse lighting sources over a broad area. It determines the total installed luminous flux (Φinst) needed to provide the required received flux (Φrec), taking into account the maintenance factor and utilization factor. The utilization factor depends on luminaire properties, room reflectance, distribution of light sources, and the room index. The number of lamps required is calculated as the product of the required flux and area divided by the lamp lumen output and adjustment factors.
Illumination Lighting
The document discusses the principles of street lighting. It describes two main principles: 1) the diffusion principle and 2) the specular reflection principle. The diffusion principle uses reflectors designed to spread light uniformly downward, creating soft, diffuse light without harsh shadows. This prevents glare for drivers. The specular reflection principle uses upward-curved reflectors to throw light at a large angle, allowing the light source and road surface to be seen but creating glare. Diffuse lighting is preferred for safety.
Lighting 1 Types Of Light
This document discusses different types of lighting used in photography, including hard light and soft light. Hard light comes from a small light source and creates sharp shadows, while soft light has a larger source or diffusion material and fills shadows. Common lighting fixtures mentioned are fresnels, ellipsoidals, and scoops. Methods for softening hard light include moving the light closer, using reflectors to bounce light, umbrellas, and placing diffusion materials between the light and subject.
Basics of Indoor Lighting
Last February 17, 2012, the 2nd IIEE-CRCSA Technical Seminar kicked off with a good response from the members and non-members with the participation of more than 100 who showed-up at the White Palace Hotel, Riyadh, Saudi Arabia. Seminar title was “Basics of Indoor Lighting using DIALux”. The seminar was conducted by Engr. Michael T. Santiago, a Lighting Application & Design Engineer from Saudi Lighting Company. The participants were awed by his DIALux 4.10 software demonstration specially when he imported a room layout from AutoCad drawing and applied the lighting calculation on it which later provided a very nice colored 3-D drawing of the room. A continuation of this seminar which is “Basics of Outdoor Lighting” will be presented on the incoming 14th Midyear Convention.
SOURCE: http://iiee-crcsa.org/index.php/9-news-articles/90-iiee-crcsa-second-technical-seminar-kicked-off
Illumination basic and schemes
This document provides an overview of various types of electrical lighting sources and illumination concepts. It discusses the basic terms used in illumination like luminous flux, lumen, candle power, and inverse square and Lambert's cosine laws. It then describes different electrical light sources including incandescent, fluorescent, mercury vapor, sodium vapor, neon and halogen lamps. For each light source, it explains the working principle, construction details, advantages and applications. The document serves as a useful reference for understanding various electrical lighting techniques and concepts of illumination.
protection and relay scheme
Protective relays are used to isolate faults in electrical systems and protect equipment from damage. There are different types of relays including electromagnetic, solid-state, and microprocessor-based relays. Relays are used for motor protection including overload protection, locked rotor protection, and single phase/unbalance protection. Transformer protection includes gas and temperature monitoring as well as differential and ground fault protection. Generator protection includes differential, ground fault, and negative sequence protection to prevent phase unbalancing.
Types of Lighting and Luminaire
Sample pictures of lighting and luminaire, For architecture students having subjects such as Building Utilities; Lighting and Acoustics.
Electrical wiring BY Jemish
Knowledge of Electrical wiring short and sweet
with pictures for easy understanding and project work.
INTERIOR LIGHTING DESIGN A STUDENT'S GUIDE
This guide on lighting design is intended for students who have no prior knowledge of lighting and also for those who are experienced but would like to bring themselves up to date with developments in lamp and luminaire design, modern design theory, European Standards and the CIBSE code for Interior Lighting 1994.
It develops the basic principles of lighting science but then goes on to provide a modern design perspective for both artificial lighting and day lighting which will be useful to experienced designers.
Lighting ppt 1
This document discusses ways to reduce energy usage from lighting in buildings through green practices. It recommends using natural daylight whenever possible through proper window and skylight design. When artificial lights are needed, the right amount and type of lighting should be used based on the task. Different lighting technologies like LEDs and fluorescents are more efficient than incandescent bulbs. Automatic controls can further reduce energy by turning lights off when not needed or adjusting output based on daylight.
protection of transmission lines[distance relay protection scheme]
The document discusses various aspects of transmission line protection including classification of transmission lines, types of faults, protection schemes, requirements of distance protection, over current protection, phase comparison protection, and distance protection schemes. It also covers autoreclose philosophy, power swings, fuse failure function, and other protection functions.
More Related Content
Viewers also liked
Akash gidwani BSc-Interior Design (Lighting Project )
The document discusses lighting design for commercial and residential spaces. It covers key lighting principles and terms like illumination, lumens, footcandles, lux, efficacy, and color temperature. It describes different types of artificial light sources including incandescent, fluorescent, discharge lamps, and light-emitting diodes (LEDs). It also covers lighting fixtures, luminaires, and different types of lighting like general, task, accent, and decorative lighting.
APEC ARCHITECTS' OPERATION MANUAL
The APEC Architect Project establishes standards and criteria for architects across participating economies in the Asia-Pacific region. It includes an online register of qualified architects divided into sections for each of the 15 participating economies. The Central Council governs the project and delegates responsibilities to Monitoring Committees in each economy and a rotating Secretariat that provides administrative services.
Illumination
This document discusses illumination design and lighting concepts. It defines key lighting terms like luminous flux, illuminance, and luminous efficacy. It describes factors to consider in indoor lighting system design like occupancy, space size and shape, and activity type. The document provides examples of calculating average illuminance and number of light fixtures needed using the lumen method based on IESNA recommendations. It also discusses uniformity of light and relationships between mounting height and fixture spacing.
Lighting Design Project (Mohd. nadeem MSC. Interior Design)
This document discusses lighting design for commercial and residential spaces. It covers various topics such as:
1. The different types of light sources including incandescent, fluorescent, halogen, and LED lamps.
2. Factors that influence light quality like color temperature, color rendering index, and lighting fixtures.
3. Classifications of lighting fixtures and the different types of lighting like general, accent, task, and decorative lighting.
4. Detailed information about incandescent lamps, their construction, advantages, disadvantages and types.
Writing engineering report
This presentation covers the key aspects of writing engineering reports, including report purpose and planning, format and organization, headings and language, visual design, source documentation, and finishing touches. It discusses writing the abstract, introduction, literature review, methodology, results, discussion, and conclusion sections. The presentation emphasizes that reports should inform readers precisely and concisely through clear organization, language, visuals, and citations. Readers should understand the research problem and findings without reading the entire report.
Overview of Lighting Design using Dialux 4.6
This was presented in IIEE-ERCSA's Annual Convention last 14 November 2008 at Meridien Hotel, Al-Khobar, KSA.
Protection of transmission lines(encrypted)
This document discusses protection methods for transmission lines. It describes:
1. Transmission lines require more protective schemes than other equipment due to their long lengths and exposure, making faults more common.
2. Key methods of transmission line protection include time-graded overcurrent protection, differential protection, current-graded overcurrent protection, and distance protection.
3. Distance protection uses impedance relays that can discriminate between faults along the line and those near the end, providing more selective operation than overcurrent protection alone. It describes implementations using simple impedance, reactance, and mho relays.
ILLUMINATION & LIGHTING
This document discusses illumination and lighting schemes. It begins with an introduction to artificial lighting and important terminology like luminous flux and illumination. It then describes different lighting schemes including direct, semi-direct, semi-indirect and indirect lighting. It also discusses the design of indoor lighting schemes and different types of lamps such as incandescent, halogen, discharge and fluorescent lamps. Finally, it covers topics like industrial lighting, street lighting and references used.
Lighting design considerations
The document provides an overview of lighting design considerations for a presentation by Sandal Usmani and Momin Mohammad Zaki. It discusses key factors in lighting design including lighting quantity through task illuminance levels, and lighting quality in terms of light distribution, integration of daylighting, and considerations for the space and workplace environment. Specific design elements are outlined, such as using task and ambient lighting, minimizing light pollution and trespass, providing flexibility, and addressing color appearance, luminance, and glare.
Illumination - Method of calculation
There are three main methods for lighting calculations: 1) Watts per square meter, 2) Lumen or light flux, and 3) Point to point or inverse square law. The lumen method is used to estimate illumination patterns from diffuse lighting sources over a broad area. It determines the total installed luminous flux (Φinst) needed to provide the required received flux (Φrec), taking into account the maintenance factor and utilization factor. The utilization factor depends on luminaire properties, room reflectance, distribution of light sources, and the room index. The number of lamps required is calculated as the product of the required flux and area divided by the lamp lumen output and adjustment factors.
Illumination Lighting
The document discusses the principles of street lighting. It describes two main principles: 1) the diffusion principle and 2) the specular reflection principle. The diffusion principle uses reflectors designed to spread light uniformly downward, creating soft, diffuse light without harsh shadows. This prevents glare for drivers. The specular reflection principle uses upward-curved reflectors to throw light at a large angle, allowing the light source and road surface to be seen but creating glare. Diffuse lighting is preferred for safety.
Lighting 1 Types Of Light
This document discusses different types of lighting used in photography, including hard light and soft light. Hard light comes from a small light source and creates sharp shadows, while soft light has a larger source or diffusion material and fills shadows. Common lighting fixtures mentioned are fresnels, ellipsoidals, and scoops. Methods for softening hard light include moving the light closer, using reflectors to bounce light, umbrellas, and placing diffusion materials between the light and subject.
Basics of Indoor Lighting
Last February 17, 2012, the 2nd IIEE-CRCSA Technical Seminar kicked off with a good response from the members and non-members with the participation of more than 100 who showed-up at the White Palace Hotel, Riyadh, Saudi Arabia. Seminar title was “Basics of Indoor Lighting using DIALux”. The seminar was conducted by Engr. Michael T. Santiago, a Lighting Application & Design Engineer from Saudi Lighting Company. The participants were awed by his DIALux 4.10 software demonstration specially when he imported a room layout from AutoCad drawing and applied the lighting calculation on it which later provided a very nice colored 3-D drawing of the room. A continuation of this seminar which is “Basics of Outdoor Lighting” will be presented on the incoming 14th Midyear Convention.
SOURCE: http://iiee-crcsa.org/index.php/9-news-articles/90-iiee-crcsa-second-technical-seminar-kicked-off
Illumination basic and schemes
This document provides an overview of various types of electrical lighting sources and illumination concepts. It discusses the basic terms used in illumination like luminous flux, lumen, candle power, and inverse square and Lambert's cosine laws. It then describes different electrical light sources including incandescent, fluorescent, mercury vapor, sodium vapor, neon and halogen lamps. For each light source, it explains the working principle, construction details, advantages and applications. The document serves as a useful reference for understanding various electrical lighting techniques and concepts of illumination.
protection and relay scheme
Protective relays are used to isolate faults in electrical systems and protect equipment from damage. There are different types of relays including electromagnetic, solid-state, and microprocessor-based relays. Relays are used for motor protection including overload protection, locked rotor protection, and single phase/unbalance protection. Transformer protection includes gas and temperature monitoring as well as differential and ground fault protection. Generator protection includes differential, ground fault, and negative sequence protection to prevent phase unbalancing.
Types of Lighting and Luminaire
Sample pictures of lighting and luminaire, For architecture students having subjects such as Building Utilities; Lighting and Acoustics.
Electrical wiring BY Jemish
Knowledge of Electrical wiring short and sweet
with pictures for easy understanding and project work.
INTERIOR LIGHTING DESIGN A STUDENT'S GUIDE
This guide on lighting design is intended for students who have no prior knowledge of lighting and also for those who are experienced but would like to bring themselves up to date with developments in lamp and luminaire design, modern design theory, European Standards and the CIBSE code for Interior Lighting 1994.
It develops the basic principles of lighting science but then goes on to provide a modern design perspective for both artificial lighting and day lighting which will be useful to experienced designers.
Lighting ppt 1
This document discusses ways to reduce energy usage from lighting in buildings through green practices. It recommends using natural daylight whenever possible through proper window and skylight design. When artificial lights are needed, the right amount and type of lighting should be used based on the task. Different lighting technologies like LEDs and fluorescents are more efficient than incandescent bulbs. Automatic controls can further reduce energy by turning lights off when not needed or adjusting output based on daylight.
protection of transmission lines[distance relay protection scheme]
The document discusses various aspects of transmission line protection including classification of transmission lines, types of faults, protection schemes, requirements of distance protection, over current protection, phase comparison protection, and distance protection schemes. It also covers autoreclose philosophy, power swings, fuse failure function, and other protection functions.
Viewers also liked (20)
Akash gidwani BSc-Interior Design (Lighting Project )
Akash gidwani BSc-Interior Design (Lighting Project )
Lighting Design Project (Mohd. nadeem MSC. Interior Design)
Lighting Design Project (Mohd. nadeem MSC. Interior Design)
protection of transmission lines[distance relay protection scheme]
protection of transmission lines[distance relay protection scheme]