1) The document discusses sulfation buildup in batteries which occurs when batteries are left unused or in extreme temperatures. This sulfation decreases battery performance over time. 2) It then describes a battery regeneration technology called Electro-Chemical Battery Enhancement Process (EBEP) that can revive sulfated batteries and restore their capacity. The EBEP process diagnoses the battery, proposes a revival plan, and regenerates the battery through processes like levelling, reactivating, and equalization. 3) EBEP is said to double battery life, recover capacity and performance, and reduce water loss, charging requirements, and corrosion. It provides an environmentally friendly alternative to frequent battery replacement that saves costs

1. Energy Storage CAPEX & OPEX reduction through
“Revolutionary Battery Rejuvenation Solutions”
BANGALORE METROPOLITAN TRANSPORT CORPORATION
CAPEX AND OPEX REDUCTION ON BATTERIES

2. Sulfation in Battery & its effects
Battery discharges by itself, It can go as high as 3% to 20% per month in idle state
depending on the battery type and temperature while not in use. Extreme climates
are not good for batteries. Extreme cold will reduce the power available and will
make battery case brittle and easily broken. Extreme heat will result electrolyte
loss due to evaporation. All the above cause SULFATION in batteries, which
becomes a fatal cause of their failure to perform.
Its Effects
• Batteries will take longer time for charging.
• Runtime/Backup reduces drastically.
• AMP/HR capacity and normal voltage will reduce.
• Electrolyte density decreases because of less sulfuric acid.
• Water dehydration is frequent due to longer charging time.
• Accelerates corrosion in positive plates.
• Battery generates more hazardous gases.

3. 1. Mechanical condition
inside out
2. Sate of charge
3. Sulfation build up level
4. Battery operation
history, operating
temperature etc.
Battery Regeneration Technology
Our battery regeneration EBEP technology can revive any
sulfated battery which is mechanically intact
Genesis Process
Diagnostic Recommendation Regeneration
1. Based on diagnostic
report, technician will
propose the revival plan
1. Levelling
2. Genesis reactivator
3. Injection of Power Plus
battery additive
4. Equalization after
battery charging

4. Our Electro-Chemical Battery Enhancement Process (EBEP) increases the service life of all
batteries. The object of the EBEP process on your batteries is to sustain and prolong
continuous performance, secure reliability, extend life span, and maximize return on
investment. The EBEP rejuvenation process takes only 16-24 hours and will yield the following
benefits:
1. It can double the useful life of Lead Acid batteries.
2. Guarantee to cut expenditures in replacement batteries.
3. Recovers lost capacity / backup or run time in 24 hours.
4. Recovers low internal resistance of each cell.
5. Reduces the amount of charge current required to keep them at full capacity.
6. Reduces the rate of water loss per cell.
7. Restores plate potentials and voltage.
8. Protects grid plate and paste from passivation due to hard sulfation & corrosion.
9. Recovers the soft porosity of sulfated plates.
10. Increases and sustains the reliability and efficiency of your backup system.
11. Helps the environment by extending battery life.
Thus, one can gain a great benefit from not spending unnecessary money on battery
replacements. This environment friendly process will extend the useful life of any new, weak or
discarded battery at a fraction of the cost of new batteries.
Battery Regeneration Technology

5. Battery life extension: Business Case
EBEP Process- Green solution for world’s most hazardous waste
Battery Bank Business Case
Battery Voltage 12 V
Battery Rating 200 Ah
Price/Ah 60 INR
Battery Price 15,000 INR
Battery Life 3 Years
Battery Cost/ yr 5000 INR
Treatment cost with warranty of 1 Yr 2500 INR
Cost Saving/Battery /Year 2500 INR

6. Save Cost
Save Environment