HYGIENE KIT, RELIEF KITS, BLANKETS, JERRY CANS, TARPAULAINS

1. ANY TIME, ANY PLACE & ANYWHERE - HUMANITARIAN EMERGENCY RELIEF SUPPLIES…..
HELPING YOU TO HELP COMMUNITIES
ER THE GLOBE

2. EMERGENCY RELIEF ITEMS

3. TRADITIONAL BIRTH KIT

4. MIDWIFERY KIT

5. FUMACARE JUMBO WORKPLACE FIRST AID KIT

6. HYGIENE KIT-USAID

7. EMIRATES RED CRESCENT

8. EDUCATION KIT

9. 35 LTR JERRY CAN

10. 50 LTR JERRY CAN

11. FULL OPEN TOP

12. 10/20 LTR SEMI COLLASIBLE JERY CAN

13. ICRC KITCHEN SET TYPE A

14. ICRC- KITCHEN SET TYPE B

15. UNHCR TYPE B

16. ICRC TARPAULIN

17. UNHCR TARPAULIN

18. BLANKET -WOOLEN UNHCR

19. BLANKETS - ACRYLIC

20. BLANKETS -EMERGENCY

21. BUCKETS - OXFAM

22. SHELTER TOOL KIT

23. SOLAR MOBILE CHARGER

24. LANTERN - KEROSENE

25. STOVE - KEROSENE

26. HDPE-TARPAULIN

27. TARPAULINS

28. CLEAN DELIVERY KIT

29. BIO – DIGESTER TOILET

30. EXAMINATION TABLE

31. FOWLER BEDS

32. EXAMINATION COUCH

33. HOSPITAL BEDS

34. HOSPITAL BEDS

35. INVALID WHEEL CHAIR & DRESSING DRUMS

36. HOSPITAL EQUIPMENTS

37. STRETCHER

38. MEDICAL DISPOSABLE

39. DEEP FREEZER

40. ICE LINED REFRRIGATOR

41. COLD CHAIN EQUIPMENTS
Cold Boxes – Long & short range
Vaccine Carriers
Ice Packs

42. SHALLOW & DEEP WELL HAND PUMPS

43. AFRIDEV HAND PUMP
APPLICATION DATA
Minimum bore size ... 100 mm.
Internal dia. of Cylinder ... 50 mm
Stroke length ... 225±3 mm.
Average discharge per stroke ... 17 liters per minute of 40 strokes.
Operating depth (approx.) ... up to 45 meters.
SALIENT FEATURES:
PUMP HEAD ASSEMBLY :Mild Steel Hot dip Galvanized construction.
HANDLE ASSEMBLY :Mild Steel Hot dip Galvanized construction. Adjustable handle.
PEDESTAL ASSEMBLY :Mild Steel Hot dip Galvanized construction.
Options of Square, Round, & Three legged.
CYLINDER ASSEMBLY :uPVC brass sleeved cylinder assembly with options
Internal components of Plastic and brass.
CONNECTING ROD :10 & 12 mm dia Galvanised Iron, Stainless Steel
(Grade AISI:202/304/316) & FRP connecting rod.
RISER PIPE :uPVC Riser pipe option of belling type and socketed.
TOOLS :Fishing tool, Open ended spanner, Socket spanner, Resting tool.
Connecting Rod Tool.
SPARES :Bush bearing, O-ring, U-seal, Cup Seal, Bobbin, Rod centralisers
Pipe centralizer, Fulcrum & Rod hanger pins. Bolts & nuts.
( As per the latest SKAT Specifications)

44. INDIA MARK II HAND PUMP
APPLICATION DATA
Duty ... Used in bore well with static water level ranging
from 12 meters to 33 mtrs.
Stroke length ... 125 ± 4 mm.
Discharge ... 17 liters per minute of 40 strokes.
SALIENT FEATURES:
PUMP HEAD ASSEMBLY : Mild Steel Hot dip Galvanized construction.
HANDLE ASSEMBLY : Mild Steel Hot dip Galvanized construction.
WATER TANK ASLY : Mild Steel Hot dip Galvanized construction with option for
Fitting with galvanized, stainless steel and upvc pipes.
PEDESTAL ASSEMBLY : Mild Steel Hot dip Galvanized construction. Options of Square,
Round, Three legged Telescopic
CYLINDER ASSEMBLY : Options of Cast Iron brass sleeved, stainless steel & uPVC cylinder.
CONNECTING ROD : Galvanised Iron, Stainless Steel (Grade AISI:202/304/316) & FRP connecting rod.
RISER PIPE : Galvanised Iron, stainless steel , and upvc riser pipes.
SPECIAL TOOLS Heavy duty clamp, Connecting rod vice, Pipe lifting spanner, Water tank pipe lifter,
Crank spanner, Connecting rod lifter, Handle axle, Punch, Chain coupling supporting
tool, coupling spanner, Bearing pressing tool,
STANDARD TOOLS : Button die set, Die set for pipe, Pipe wrench, Double ended open jaw spanner,
Adjustable spanner, Screw driver, Screw driver engineering type, Hacksaw with blade, File, flat, Half round
blade, Ball pin hammer, Oil can pressure type, Wire brush with wooden handle, Centre punch, Nylon rope,
Multi purpose grease.
SPARES : Hexagonal bolts M12x1.75x40, Hexagonal nuts M12x1.75, Hexagonal bolts M10x 1.5
x40, Nyloc Nut, Handle axle, Washer (4mm thick )for axle, Bearings Spacer, Chain
with coupling, Bolt for front cover, Pump buckers , Sealing rings, Rubber seating (small), Rubber seating
(big), Hexagonal coupling, Pipe sockets.
( As per the BIS, INDIA Specifications)

45. INDIA MARK III VLOM [65] HAND PUMP
APPLICATION DATA
Duty ... Used in bore well with static water level ranging from 12 mtrs to 33 mtrs.
Stroke length ... 125 ± 4 mm.
Discharge ... 17 liters per minute of 40 strokes.
SALIENT FEATURES:
PUMP HEAD ASSEMBLY : Mild Steel Hot dip Galvanized construction.
HANDLE ASSEMBLY : Mild Steel Hot dip Galvanized construction.
WATER TANK ASLY : Mild Steel Hot dip Galvanized construction with option for Fitting with galvanized,
stainless steel and upvc pipes.
PEDESTAL ASSEMBLY : Mild Steel Hot dip Galvanized construction. Options of Square, Round, Three
legged & Telescopic
CYLINDER ASSEMBLY : Options of 2.5” Open Top Cast Iron brass sleeved, stainless steel & UPVC
cylinder. [VLOM Concept]
CONNECTING ROD : Galvanised Iron, Stainless Steel (Grade AISI:202/304/316) & FRP connecting rod.
RISER PIPE : Galvanised Iron, stainless steel , and upvc riser pipes.
SPECIAL TOOLS : Heavy duty, Connecting rod vice, Pipe lifting spanner, Water tank pipe lifter, Crank
spanner, Connecting rod lifter, Handle axle, Punch, Chain coupling supporting tool,
coupling spanner, Bearing pressing tool,
STANDARD TOOLS : Button die set, Die set for pipe, Pipe wrench, Double ended open jaw spanner,
Adjustable spanner, Screw driver, Screw driver engineering type, Hacksaw with
blade, File, flat, Half round blade, Ball pin hammer, Oil can pressure type, Wire
brush with wooden handle, Centre punch, Nylon rope 3 mm thick, Multi purpose grease.
SPARES :Hexagonal bolts M12x1.75x40, Hexagonal nuts M12x1.75, Hexagonal bolts
M10x1.5x40, Nyloc Nut, Handle axle, Washer (4mm thick )for axle, Bearings Spacer,
Chain with coupling, Bolt for front cover, Pump buckers , Sealing rings, Rubber seating
(small), Rubber seating (big), Hexagonal coupling, Pipe sockets.
( As per the BIS, INDIA Specifications)

46. INDIA MARK III VLOM [50] HAND PUMP
( As per the BIS, INDIA Specifications)
APPLICATION DATA
Duty ... Used in bore well with static water level ranging from 12 meters to 33 meters.
Stroke length ... 125 ± 4 mm.
Discharge ... 17 liters per minute of 40 strokes.
SALIENT FEATURES:
PUMP HEAD ASSEMBLY : Mild Steel Hot dip Galvanized construction.
HANDLE ASSEMBLY : Mild Steel Hot dip Galvanized construction.
WATER TANK ASLY : Mild Steel Hot dip Galvanized construction with option for Fitting with
galvanized, stainless steel and upvc pipes.
PEDESTAL ASSEMBLY : Mild Steel Hot dip Galvanized construction. Options of Square, Round, Three
legged & Telescopic
CYLINDER ASSEMBLY : Options of Open Top 2” Cast Iron brass sleeved, stainless steel & UPVC
cylinder. [VLOM Concept]
CONNECTING ROD : Galvanised Iron, Stainless Steel (Grade AISI:202/304/316) & FRP connecting rod.
RISER PIPE : Galvanised Iron, stainless steel , and upvc riser pipes.
SPECIAL TOOLS : Heavy duty /self locking clamp, Connecting rod vice, Pipe lifting spanner, Water
tank pipe lifter, Crank spanner, Connecting rod lifter, Handle axle, Punch, Chain
coupling supporting tool, coupling spanner, Bearing pressing tool.
STANDARD TOOLS : Button die set, Die set for pipe, Pipe wrench, Double ended open jaw
spanner,Adjustable spanner, Screw driver, Screw driver engineering type,
Hacksaw with blade, File, flat, Half round blade, Ball pin hammer, Oil can
pressure type, Wire brush with wooden handle, Centre punch, Nylon rope 3 mm
thick, Multi purpose grease.

47. INDIA MARK II EXTRA DEEPWELL HAND PUMP
APPLICATION DATA
Duty ... Used in bore well with static water level ranging from 50 meters to 85 meters.
Stroke length ... 100±3 mm.
Discharge ... 14 liters per minute of 40 strokes.
SALIENT FEATURES:
PUMP HEAD ASSEMBLY : Mild Steel Hot dip Galvanized construction.
HANDLE ASSEMBLY : Mild Steel Hot dip Galvanized construction with heavier handle having Tee and
counter weights
WATER TANK ASLY : Mild Steel Hot dip Galvanized construction with option for Fitting with
galvanized, stainless steel and upvc pipes.
PEDESTAL ASSEMBLY : Mild Steel Hot dip Galvanized construction. Options of Square, Round, Three
legged & Telescopic
CYLINDER ASSEMBLY :Options of Cast Iron brass sleeved, stainless steel & UPVC cylinder.
CONNECTING ROD :Galvanised Iron, Stainless Steel (Grade AISI:202/304/316) & FRP connecting rod.
RISER PIPE : Galvanised Iron, stainless steel , and upvc riser pipes.
SPECIAL TOOLS :Heavy duty /self locking clamp, Connecting rod vice, Pipe lifting spanner, Water tank
pipe lifter, Crank spanner, Connecting rod lifter, Handle axle, Punch, Chain coupling
Supporting tool, coupling spanner, Bearing pressing tool,
STANDARD TOOLS :Button die set, Die set for pipe, Pipe wrench, Double endedopen jaw
spanner,Adjustable spanner, Screw driver, Screw driver engineering type,
Hacksaw with blade, File, flat, Half round blade, Ball pin hammer, Oil can
pressure type, Wire brush with wooden handle, Centre punch, Nylon rope 3 mm thick,
Multi purpose grease.
SPARES :Hexagonal bolts M12x1.75x40, Hexagonal nuts M12x1.75, Hexagonal bolts M10
x1.5x40, Nyloc Nut, Handle axle, Washer (4mm thick )for axle, Bearings Spacer,
Chain with coupling, Bolt for front cover, Pump buckers , Sealing rings, Rubber
seating (small), Rubber seating (big), Hexagonal coupling, Pipe sockets.
( As per the BIS, INDIA Specifications)

48. A Force & Lift Hand Pump and Conversion Kit* has been developed for applications where the delivery
of water is required at an elevated level. This pump conforms to the dimensional standards of the India
Mark II hand pump family. Existing India Mark II and India Mark III VLOM installations can be adapted for
the Force & Lift application by using a specially developed Conversion Kit.
SALIENT FEATURES:
PUMP HEAD ASSEMBLY : Mild Steel Hot dip Galvanized construction.
HANDLE ASSEMBLY : Mild Steel Hot dip Galvanized construction.
WATER TANK ASLY : Mild Steel Hot dip Galvanized construction with option for Fitting with galvanized,
stainless steel and upvc pipes. & SPECIAL FITTINGS FOR FORCE LIFT
OPERATION
PEDESTAL ASSEMBLY : Mild Steel Hot dip Galvanized construction. Options of Square, Round, Three legged
& Telescopic.
CYLINDER ASSEMBLY : Options of Cast Iron brass sleeved, stainless steel & UPVC cylinder.
CONNECTING ROD : Galvanised Iron, Stainless Steel (Grade AISI:202/304/316) & FRP connecting rod.
RISER PIPE : Galvanised Iron, stainless steel , and upvc riser pipes.
SPECIAL TOOLS : Heavy duty /self locking clamp, Connecting rod vice, Pipe lifting spanner, Water tank
pipe lifter, Crank spanner, Connecting rod lifter, Handle axle, Punch, Chain coupling
supporting tool, coupling spanner, Bearing pressing tool,
STANDARD TOOLS : Button die set, Die set for pipe, Pipe wrench, Double ended open jaw spanner,
Adjustable spanner, Screw driver, Screw driver engineering type, Hacksaw with
blade, File, flat, Half round blade, Ball pin hammer, Oil can pressure type, Wire
brush with wooden handle, Centre punch, Nylon rope 3 mm thick, Multi purpose
SPARES : Hexagonal bolts M12x1.75x40, Hexagonal nuts,Hexagonal boltsM10x1.5x40,
Nyloc Nut, Handle axle, Washer (4mm thick )for axle, Bearings Spacer, Chain with
coupling, Bolt for front cover, Pump buckers , Sealing rings, Rubber seating (small),
Rubber seating (big), Hexagonal coupling, Pipe sockets.
INDIA MARK II FORCE LIFT HAND PUMP

49. U3 MODIFIED DEEPWELL HAND PUMP
The U3 Modified deep well hand pump is broadly a combination
of IM III and the Afridev deep well hand pump and is
recommended for aggressive water conditions, where G.I. pipes
cannot be used. The above ground pumping mechanism is
essentially of IM III pumps, whereas the below ground pumping
mechanism is similar to Afridev hand pump i.e. UPVC riser pipes
and cylinder assembly with UPVC brass liner.
Recommended for water level setting depth (metres) : 20-45
Minimum ID of bore (milimetre) : 100
Approximate Discharge (Litres/Hour) : 600
UPVC - Riser Pipe 63 mm ODX 4.7wt*3meters length.
MS/SS Connecting Rod Dia = 12mm
Stroke Length= 125 ± 5mm

50. TREADLE PUMP
We are manufacturing and exporting Treadle Pump which is
consisting of green inlet pipe of dia 1”, outlet flexible pipe of dia 1.5”,
cylinder size 175mmx dia 100, 1.25” G.I. Nipple, 4 nos. cup washers,
foot valve, 2 clamps and 1 foot valve suitable suction pipe.
Essential spares are supplied along with the pump, as follows.
Cup washers : 4 nos.
Screw Driver of 150mm : 1 no.
Clamps : 2 nos.
Spray Nozzle : 1 no.
Rubber Strip : 1 no.
Greese : 200 gm
Foot valve : 1 no.
Spanners 17x19 : 2 nos.

51. CONTACT US
PAWAN SAXENA
CHIEF EXECUTIVE OFFICER
TEL: +91-9810043051 [WHATSAPP]
+91-9891943051
SKYPE: SPAPWAN
WEB: WWW.FAIRBIZPS.COM
EMAILS: fairbizps@gmail.com fairbizps@yahoo.com
BLOG: https://fairbizps.blogspot.in/
FACEBOOK: https://web.facebook.com/FAIBIZPS
LINKEDIN: www.linkedin.com/in/pawan-saxena-fairbizps