This document contains the resume of Emeeliza Hornilla Caponpon. It outlines her objective to work for a reputable company where she can apply her knowledge and skills. Her educational background includes a Bachelor of Science in Chemical Engineering. Her work experience includes various engineering roles at Ibiden Philippines Incorporated, such as Engineering Supervisor, Process Engineer, and Line Engineer. She also worked as a Product Engineer for Terumo (Philippines) Incorporated. Her roles involved overseeing production processes, ensuring quality standards, improving productivity and capacity, and developing new products.

1. EMEELIZA HORNILLA CAPONPON
292 - A Interior P. BurgosSt.
BatangasCity, Philippines,4200
(+63) 998-9630952
emeelizacaponpon@yahoo.com
OBJECTIVE
To be able to work and be a part of a reputable company wherein I can impart the knowledge, skills,
leadership developed and the learning experiences acquired at work
EDUCATIONAL ATTAINMENT
Tertiary
Bachelor of Science in Chemical Engineering
Batangas State University (2001 - 2006)
Batangas City, Philippines
EMPLOYMENT HISTORY
 Engineering Supervisor , from April 2015 up to Present
Production Engineering, Core Block
Ibiden Philippines Incorporated
First Philippine Industrial Park, Brgy. Sta. Anastacia, Sto.Tomas
Batangas, Philippines
 Process Engineer II , from April 2012 up to March 2015
CORE Plating
Production Engineering, CORE Block
Ibiden Philippines Incorporated
First Philippine Industrial Park, Brgy. Sta. Anastacia, Sto.Tomas
Batangas, Philippines
 Process Engineer I, from September 19, 2011 up to December 16,2011
Production Engineering
Ibiden Electronics Malaysia
1049, JalanPerindustrian Bukit Minyak 8, KawasanPerindustrian Bukit Minyak,
14100 SimpangAmpat, Penang, Malaysia

2.  Process Engineer I, from April 2011 up to March 2012
CORE Plating
Manufacturing Engineering,CORE Block
Ibiden Philippines Incorporated
First Philippine Industrial Park, Brgy. Sta. Anastacia, Sto.Tomas
Batangas, Philippines
 Line Engineer, from May 2008 up to March 2011
CORE Plating
Process Engineering, CORE Block
Ibiden Philippines Incorporated
First Philippine Industrial Park, Brgy. Sta. Anastacia, Sto.Tomas
Batangas, Philippines
 Product Engineer, from June 2007 up to March 2008
Product Engineering Section
Terumo (Philippines) Incorporated
124 East Main Avenue, Laguna Technopark
Biñan Laguna, Philippines
 On the Job Training, from November 2005 up to March 2006
Process Basic Section
Japan Gas Corporation
2109 Prime St. Madrigal Business Park
Ayala, AlabangMuntinlupaCity
WORK EXPERIENCE
ENGINEERING SUPERVISOR, IBIDEN Philippines Incorporated
Job Summary:
Guides and supervises process engineers with objective of accomplishing the established
process improvement plan and achieving its main goal for productivity, quality, capacity, delivery and
cost within the limits of Process engineering principles aligned with over all Engineering Division Policy
Essential Functions and Responsibilities
Quality Process Improvement
Checks, reviews and applies module methodologies and standardizations; generates, advises
And leadsRisk mitigations and abnormality prevention activities; presents and coordinates improvement
activities with other sections in order to achieve process stability considering PQCD (Productivity,
Quality, Cost and Delivery)
Capacity Expansion and Productivity
Administers execution of machine set-up activities, carries out machine and product flexibility
activities; checks, reviews and applies standardization in order to meet module’s capacity requirements

3. Product Development
Collaborates with related product owners on module optimization and development of new
products; leads risk assessment of new product design and its processing condition; checks and
reviews evaluation items and schedule in order to achieve on time certification with best quality
Process Capability
Guarantee module’s process capability and performance; formulates and controls improvement
action in order to increase company competitiveness; maintain and sustain defect free condition
Quality System
Ensures that module meets and maintains compliance to the required standards; satisfies
module requirement for both internal and external Quality System audit; leads closure of audit findings
in order to achieve and sustain defect free condition
Other Duties and Responsibilities
 Maintains an awareness and observation of Environment, Safety and Health
 Maintains and practices 5S in the area and promote TPM activities
 Ensures company rule s and regulations were followed
 Training and Development Engineering Representative
SENIOR PROCESS ENGINEER /PROCESS ENGINEER / LINE ENGINEER,
IBIDEN Philippines Incorporated
Job Summary:
This position carries out actions to sustain and/or improve productivity and yield.
Essential Functions and Responsibilities
 Conducts Line Monitoring
 Sustaining of corrective actions at the line.
 Develops and utilizes statistical methods to analyze product yield.
 Assists and coordinates project transfer when needed.
 Plans and performs evaluation study and improve productivity when necessary
Other Duties and Responsibilities
 Maintains an awareness and observation of Environment, Safety and Health
 Maintains and practices 5S in the area.
 Carries out any other duties as requested and required by the immediate superior.
 Proposes programs for continual improvement of area.
Achievements
 Management
Assigned Team Leader, Front of Line Process (Plating, Cleanroom and Non Cleanroom
Process) Facilitated communication training between employees for improved teamwork,
improved relations with manufacturing production section
 Productivity
Conducted process validation and evaluation by Design of Experiment (DOE) loading
Conduct design review and implement Supplier change as well as and Chemical change for
Cost Reduction activities

4.  Quality
Conducts process line sustaining activities, study and implement yield improvement activities,
and promotes excursion prevention activities
 Capacity
Support set up of Electro less Plating Process Line, to support capacity and productivity
requirements
Also, Set-up Electrolytic Plating Line to support high volume manufacturing
- Horizontal Desmear and Electroless Copper Plating ( Atotech )
- Vertical Electrolytic Copper Plating ( Almex PE)
PRODUCT ENGINEER, Terumo(PHILIPPINES)Incorporated
Job Summary:
This position is accountable in analyzing data, conducting testing and experiment, establishing
effective plan and organizing resources for the smooth implementation of projects leading to cost and
quality improvements.
Essential Functions and Responsibilities
 Maintains and follows proper ISO procedures and GMP requirements.
 Checks production parameters if it satisfies ISO Standards, verifies if within Validation
parameters and evaluates capability of a process in meeting the established standards.
Determine if process is in control through statistical means. Reports to superior any uncontrolled
condition.
 Checks product characteristics in the assigned area through dimensional measurement and/or
ocular inspection, conducts performance evaluation to assess whether products, parts, material
components do in fact conform with established quality requirements. Reports immediately to
superior if significant difference is observed from specification and from the current approved
product or materials.
 Performs calibration of instruments and ensure that they are kept and maintained at all times.
 Checks the characteristics of competitor’s products. Conduct researches, studies and tests in
order to improve current product performance and surpass competitors.
 Provides technical assistance and product support to technicians and in line Operators, or
Leaders by investigating cause of Non-conformities.
 Records result of evaluation in Control sheets/ Forms, submits to superior for checking and files
or maintains record according to document Control Procedure.
 Feedbacks to superior all work accomplishments, needs and difficulties at all times.
 Implements 5S in working area and participate in company-wide programs
Other Duties and Responsibilities
 Participates in project performance team meetings on behalf of the job unit order to provide
ideas, methods or processes for unit/company performance improvement.
 Performs other job related duties assigned.

5. TRAININGS ATTENDED
 Problem Solving (QC Tools) Leadership Fundamentals
CHARACTER REFERENCES
 Engr. Francis Leo D. de Castro
Former Section Manager
Production Engineering
Ibiden Philippines Incorporated
First Philippine Industrial Park, Brgy. Sta. Anastacia, Sto.Tomas
Batangas, Philippines
Mobile No:(+63) 905-346-3142
 Engr. Ray S. Abulencia
Yield and FM Integration Engineer
AT&S (Chongqing) Co.Ltd
No.58 Chang He Rd., Yuzul Town, Jiangbei District,
Chongqing China
Mobile No:(+86) 18423141741