FULL ENJOY 🔝 8264348440 🔝 Call Girls in Diplomatic Enclave | Delhi
EMC Networker installation Document
1. Networker Setup steps:
1. Install Networker app server in windows machine, here I install server, client and storage node.
2. Install Networker app server in Linux system (only client) from that server we taken backup.
3. Though I don’t have any tape library, that’s why I install Firestreamer for creating virtual tape
library where I assign a folder as a tape.
4. Client configuration through Network App server.
5. Take a backup from client server.
6. Start the recover process for client server from Server.
7. Basic operation of Networker App ( Start , Stop , Status)
Look At the below Diagram, we can find diagram of Networker Server
Step 1: Install Networker in windows Machine
Unzip the nw90_win_x64.zip for Networker 9 version
3. Here my windows server works as Server and client means from this windows machine , I can perform
other networker client backup and recovery process.
18. Now install this mention RPM
[root@NetWorker linux_x86_64]# rpm -ivh lgtoclnt-9.0.0.2-1.x86_64.rpm lgtonmc-9.0-1.x86_64.rpm
lgtoman-9.0.0.2-1.x86_64.rpm lgtonode-9.0.0.2-1.x86_64.rpm lgtoserv-9.0.0.2-1.x86_64.rpm
So many dependenciyes RPM is needed that’ why athached /media/RHEL_6.4 x86_64 Disc 1/Packages
and install dependciyes RPM
19. The NetWorker installation for all supported x64 Linux operating systems and versions requires two packages that
the default OS installation might not include.
Manually download and install the following Linux OS packages before you install the NetWorker software. The
NetWorker installation fails when these two packages do not exist on the host:
rpm -uvh --nodeps compat-libstdc++-33-3.2.3-69.el6.i686.rpm
rpm -ivh --nodeps compat-libstdc++-33-3.2.3-69.el6.i686.rpm
rpm -ivh --nodeps compat-libstdc++-33-3.2.3-69.el6.x86_64.rpm
ls glibc*
rpm -ivh --nodeps glibc-2.12-1.107.el6.i686.rpm
rpm -ivh --nodeps glibc-devel-2.12-1.107.el6.x86_64.rpm
rpm -ivh --nodeps glibc-2.12-1.107.el6.x86_64.rpm
rpm -ivh --nodeps glibc-*
ls nss-softokn-fr*
rpm -ivh --nodeps nss-softokn-freebl*
After complete this dependecyes
20.
21. Failed to start Networker due to no entry in /etc/hosts
After enter this entry it’s ok
25. Step 4:Make linux system as a client sytem for windows system
Now Aadministrator windows come in, then click Protection
Enter the Linux system IP Or you can use Hostname client Server , you must entry hosts file in client
information
26. Though client is install in Linux system then Server will automatically get information of client system
27. ** Getting error here to resolve it put server hostname in client machine
34. Step 5: Due to Some Technical problem Backup Sceniraio is ommitted from this Doc.
(Due to no phyical tape Library)
Step 6: Recovery step for Client from Backup
Right click of client , then select recover
Client infromation with all backup et information is coming, Then click Next button
35. Step 7: Basic Opertaion of Netwoker ( Start , Stop , Status)
Status check: ps -ef | grep nsr
If any job is not running then you have to understand Networker is not running
If running then you will see the Networker Job is running.
Start Networker job:
Move this path /etc/init.d then run ./networker start
36. Check the status
./networker status
Stop the Netwoker app: Move this path /etc/init.d then run ./networker stop
Thanks for watching my Doc.