The document summarizes the Profiler software module from Unico that provides embedded profile control for synchronization of automation with presses or shears. The Profiler can control single- or multi-axis automation through coordinated motion control of up to 32 drives across 32 axes. It provides programmable cam profiles, maximum speed calculation, press simulation, and smooth start/stop/transfer functions. Additional features include data logging, customization capabilities, safety features, and PLC interface through inputs/outputs.
STF® Servo Transfer Feed Our STF® Servo Transfer Feed is a sophisticated multiaxis control system for in-press automation. Metal Forming & STF® Servo Transfer Feed Our STF® Servo Transfer Feed is a sophisticated multiaxis control system for in-press automation.
Read more: https://bit.ly/3XfWVgg
The FTS software module from Unico provides automated feeding control for roll-feed applications which enables users to take full advantage of the machine.
Request for Quote: https://bit.ly/3H6L9Q5
The FTS™ Feed-to-stop control software module from Unico provides automated feeding control for roll-feed applications which enables users to take full advantage of the machine.
Know more: https://rb.gy/0kagto
FTR Dive for controlling feed-to-register applicationsUnico
The FTR drives engineered specifically for controlling feed-to-register applications that use a sensor to detect a preprinted mark or mark pattern and index the web with a settable feed length.
Control software embedded within the drive eliminates the need for an external control rack. When used in conjunction with a programmable controller, the drive forms a powerful automation work cell that can either stand-alone or be easily integrated with other Unico automation cells to build a complete control system for a web-processing line
Develop and test your E-Drive with repeatable performance runs using Unico’s E-Drive Dyno Drive.
This highly engineered E-Drive dynamometer drive is a result of working closely with clients on their requirements for EV propulsion testing. The unique design allows the drive to operate any AC motor without the current-loop setup required by conventional drives. Fixed and dynamic inertias are easy to simulate using internal models or external commands – allowing you to closely match the test requirements over a wide range of E-Drive designs. The design allows for ultra quiet operation, making it perfect for noise, vibration and harshness testing. Full four quadrant operation gives you the ability to limit or block operations in any of the quandrants, so you can limit powering in both motoring and regenerating modes.
Unico provides Flying Cut-off control used for flying cutoff die accelerator drive system with the best-in-class flexibility and reliability required for coil processing applications.
Read more: https://rb.gy/vp8phq
STF® Servo Transfer Feed Our STF® Servo Transfer Feed is a sophisticated multiaxis control system for in-press automation. Metal Forming & STF® Servo Transfer Feed Our STF® Servo Transfer Feed is a sophisticated multiaxis control system for in-press automation.
Read more: https://bit.ly/3XfWVgg
The FTS software module from Unico provides automated feeding control for roll-feed applications which enables users to take full advantage of the machine.
Request for Quote: https://bit.ly/3H6L9Q5
The FTS™ Feed-to-stop control software module from Unico provides automated feeding control for roll-feed applications which enables users to take full advantage of the machine.
Know more: https://rb.gy/0kagto
FTR Dive for controlling feed-to-register applicationsUnico
The FTR drives engineered specifically for controlling feed-to-register applications that use a sensor to detect a preprinted mark or mark pattern and index the web with a settable feed length.
Control software embedded within the drive eliminates the need for an external control rack. When used in conjunction with a programmable controller, the drive forms a powerful automation work cell that can either stand-alone or be easily integrated with other Unico automation cells to build a complete control system for a web-processing line
Develop and test your E-Drive with repeatable performance runs using Unico’s E-Drive Dyno Drive.
This highly engineered E-Drive dynamometer drive is a result of working closely with clients on their requirements for EV propulsion testing. The unique design allows the drive to operate any AC motor without the current-loop setup required by conventional drives. Fixed and dynamic inertias are easy to simulate using internal models or external commands – allowing you to closely match the test requirements over a wide range of E-Drive designs. The design allows for ultra quiet operation, making it perfect for noise, vibration and harshness testing. Full four quadrant operation gives you the ability to limit or block operations in any of the quandrants, so you can limit powering in both motoring and regenerating modes.
Unico provides Flying Cut-off control used for flying cutoff die accelerator drive system with the best-in-class flexibility and reliability required for coil processing applications.
Read more: https://rb.gy/vp8phq
Mitsubishi ac servos melservo j4 solutions rotary knifeDien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Catalog: Biến tần Frenic5000-VG7S-405C Fuji
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
Unico provides Position/Indexer Control PIC™ software specifically for controlling linear- or rotary-indexer applications with the best-in-class flexibility and reliability.
Request for Quote: https://rb.gy/7aumkt
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi ac servos melservo jn-dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
This short presentation provides an overview of the capabilities of the Wintriss Controls SmartPAC PRO press automation controller.
Features include a programmable limit (cam) switch, die protection, tonnage monitoring, brake stopping time monitor, counters, servo feed interface, automatic machine data collection, shutheight and counterbalance control, and in-die measurement.
Flying Cut-off control - Hydraulic | Unico.pdfUnico
Unico provides Flying Cut-off control used for flying cutoff die accelerator drive system with the best-in-class flexibility and reliability required for coil processing applications.
Request for Quote: https://rb.gy/0kagto
Universal Inverters For Testing | EV Battery Emulator - UnicoUnico
Unico provides modular testing solutions with its Universal Inverter to test E-motors in EV applications. Find out more about this solution
Read more: https://bit.ly/3PPEvAz
Mitsubishi ac servos melservo j4 solutions rotary knifeDien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Catalog: Biến tần Frenic5000-VG7S-405C Fuji
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
Unico provides Position/Indexer Control PIC™ software specifically for controlling linear- or rotary-indexer applications with the best-in-class flexibility and reliability.
Request for Quote: https://rb.gy/7aumkt
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi ac servos melservo jn-dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
This short presentation provides an overview of the capabilities of the Wintriss Controls SmartPAC PRO press automation controller.
Features include a programmable limit (cam) switch, die protection, tonnage monitoring, brake stopping time monitor, counters, servo feed interface, automatic machine data collection, shutheight and counterbalance control, and in-die measurement.
Flying Cut-off control - Hydraulic | Unico.pdfUnico
Unico provides Flying Cut-off control used for flying cutoff die accelerator drive system with the best-in-class flexibility and reliability required for coil processing applications.
Request for Quote: https://rb.gy/0kagto
Universal Inverters For Testing | EV Battery Emulator - UnicoUnico
Unico provides modular testing solutions with its Universal Inverter to test E-motors in EV applications. Find out more about this solution
Read more: https://bit.ly/3PPEvAz
E-Motor Emulator | EV Inverter Testing - UnicoUnico
E-Motor emulators for testing electric vehicle traction inverters. Validate and test different inverter designs to prevent prototype e-motor failure.
Read more: https://bit.ly/3BWAiFm
Develop the next-generation systems for electric vehicles with the help of Unico e-axle dyno drive. Drives for everything from end-of-line test rigs to research and development platforms.
Read more: https://bit.ly/3FP9xDU
The Unico Embedded Profile Control system is a scalable motion control system designed specifically for metal forming applications. It provides coordinated motion control for up to 20 drives in as many as 20 independent axes in its standard configuration.
Know more: https://bit.ly/3exuGZD
Test your EV and HEV propulsion systems with a UNICO EV Battery
Simulator / Emulator.
This outstanding EV battery simulator / emulator comes standard with programmable voltage and current controls for resistance simulation, so you can quickly test and view results for hundreds of different battery designs on powertrain performance. With the programmable slew rate, you can precisely regulate the response to a change in both the requested output and changes in the load. And with a full filtered output, systems can be designed with minimal current and voltage ripple – typical ripple is less than 1%.
UNICO electric vehicle testing systems make e-mobility and vehicle electrification development smooth and fast by offering the EV propulsion test stand systems you need, the technical expertise to spec your drives and controls systems, and global support for upgrades, service, and support. Your system is designed for the evolving needs of high voltage EV testing including performance, validation, and end of line testing.
Develop your next generation EV battery packs and modulesusing a Unico Battery Cycler.The Unico
battery test system can be configured as both a battery emulator (orsimulator) and a battery tester(or
cycler).When it is configured as an EV battery cycler, it is designed forbattery cycling (charging and
discharging) of packs and/ or modules and can provide fast and accurate control of current, voltage, and power for all the battery testing needs. UNICO systems are throughout the world in the best automotive testing facilities, within EV startup companies in aviation and delivery vehicles, at state-of-the art EV hypercar testing facilities, global testing centers of EV racing teams, and labs testing EV batteries, E-Motors, E-Axles and the EV propulsion systems.
The most diverse line of electric vehicle testing products.
Unico offers a comprehensive range of electric vehicle testing products exclusively designed for test stand applications. You can purchase an EV battery cycler, EV battery emulator, Universal Inverter, or E-Motor emulator separately – or as a modular drive system that combines a battery emulator, universal inverter, and E-Motor or E-Axle Dynamometer, all in a single package powered by a single active front end. This combination package saves floor space, reduces wiring complexity, simplifies installation, and saves energy.
These drives systems enable the production of numerous vehicles of different sizes and serve various purposes like R&D, validation, and certification.
Electric Vehicle Applications
The automotive manufacturing industry uses our drives and controls products in vehicle testing for engine and powertrain dynamometers, transmission and chassis dynamometers, batteries EV battery pack emulators, E-Motor emulators, E-Axle dynamometers, on-board EV charging systems, power electronics, and fast-charging grid infrastructure. and safety and security systems.
The Fundamentals of Battery Pack & Module Testing (1).pptxUnico
Battery Pack and Module Testing
Battery Module and Pack tests typically evaluate the battery performance, safety mechanisms, cooling systems, and internal heating characteristics. Engineers and scientists also measure the state of charge (SoC), depth of discharge (DoD), direct current internal resistance (DCIR), and state of health (SoH) as part of the characterization and validation process. Tests are also conducted to evaluate the electronic components and systems attached to the battery, such as the battery management systems (BMS), connected wires, sensors, and battery fuses.
Tests performed at Module Level
Module tests are performed to assess the quality and capacity of each cell integrated into the module. The process includes both charge and discharge tests to ensure the cell connections (in parallel or series) are secure and robust to manage the expected current loads without overheating, weakening, and failing. Additionally, other tests like thermal abuse, mechanical vibration, high-voltage protection, and environmental tests are carried out at this level to ensure voltages are accurate and safe, temperature sensors function effectively, and cells are well balanced.
Tests performed at Pack Level
Pack level testing is sometimes also called End-of-Line Testing or Assembly Testing. It is mainly performed to ensure that each pack subsystem performs efficiently, including external hardware, safety mechanisms, and BMS Battery management system communications. If the strings of modules within the pack show irregularities in the expected voltage, resistance or capacity range, it can be found here and rectified. Engineers also check for any malfunction, temperature rise in the battery pack, current carrying capacity, cooling capacity, and overall mechanical structure. After complete testing, packs may undergo extra testing to simulate the typical conditions and be integrated into the system or end-product.
Top 5 Fundamental Applications for Battery Module and Pack Testing include:
Performance under Simulated Environment
Aging Characteristics of the battery
Charge/Discharge and Life Cycle Testing
Capacity and Degradation Measurement
Cooling System Efficiency Test
Efficient and Powerful Pack and Module Test Systems
Unico’s EV Battery cyclers helps to test your high voltage EV battery packs and modules. This outstanding EV battery cycler is designed for high voltage electric vehicle testing procedures that include real-time simulation of battery charging and discharging. It enables you to test the charge, discharge, and life cycle testing of EV battery packs and modules. With the help of this system, you can develop your next-generation EV battery packs and modules. The Unico battery test system can be configured as both a battery emulator (or simulator) and a battery tester (or cycler). When configured as an EV battery cycler, it is designed for battery cycling (charging and discharging) of packs and/or modules .
Improving profitability for small businessBen Wann
In this comprehensive presentation, we will explore strategies and practical tips for enhancing profitability in small businesses. Tailored to meet the unique challenges faced by small enterprises, this session covers various aspects that directly impact the bottom line. Attendees will learn how to optimize operational efficiency, manage expenses, and increase revenue through innovative marketing and customer engagement techniques.
3.0 Project 2_ Developing My Brand Identity Kit.pptxtanyjahb
A personal brand exploration presentation summarizes an individual's unique qualities and goals, covering strengths, values, passions, and target audience. It helps individuals understand what makes them stand out, their desired image, and how they aim to achieve it.
VAT Registration Outlined In UAE: Benefits and Requirementsuae taxgpt
Vat Registration is a legal obligation for businesses meeting the threshold requirement, helping companies avoid fines and ramifications. Contact now!
https://viralsocialtrends.com/vat-registration-outlined-in-uae/
RMD24 | Retail media: hoe zet je dit in als je geen AH of Unilever bent? Heid...BBPMedia1
Grote partijen zijn al een tijdje onderweg met retail media. Ondertussen worden in dit domein ook de kansen zichtbaar voor andere spelers in de markt. Maar met die kansen ontstaan ook vragen: Zelf retail media worden of erop adverteren? In welke fase van de funnel past het en hoe integreer je het in een mediaplan? Wat is nu precies het verschil met marketplaces en Programmatic ads? In dit half uur beslechten we de dilemma's en krijg je antwoorden op wanneer het voor jou tijd is om de volgende stap te zetten.
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
B2B payments are rapidly changing. Find out the 5 key questions you need to be asking yourself to be sure you are mastering B2B payments today. Learn more at www.BlueSnap.com.
RMD24 | Debunking the non-endemic revenue myth Marvin Vacquier Droop | First ...BBPMedia1
Marvin neemt je in deze presentatie mee in de voordelen van non-endemic advertising op retail media netwerken. Hij brengt ook de uitdagingen in beeld die de markt op dit moment heeft op het gebied van retail media voor niet-leveranciers.
Retail media wordt gezien als het nieuwe advertising-medium en ook mediabureaus richten massaal retail media-afdelingen op. Merken die niet in de betreffende winkel liggen staan ook nog niet in de rij om op de retail media netwerken te adverteren. Marvin belicht de uitdagingen die er zijn om echt aansluiting te vinden op die markt van non-endemic advertising.
[Note: This is a partial preview. To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
Sustainability has become an increasingly critical topic as the world recognizes the need to protect our planet and its resources for future generations. Sustainability means meeting our current needs without compromising the ability of future generations to meet theirs. It involves long-term planning and consideration of the consequences of our actions. The goal is to create strategies that ensure the long-term viability of People, Planet, and Profit.
Leading companies such as Nike, Toyota, and Siemens are prioritizing sustainable innovation in their business models, setting an example for others to follow. In this Sustainability training presentation, you will learn key concepts, principles, and practices of sustainability applicable across industries. This training aims to create awareness and educate employees, senior executives, consultants, and other key stakeholders, including investors, policymakers, and supply chain partners, on the importance and implementation of sustainability.
LEARNING OBJECTIVES
1. Develop a comprehensive understanding of the fundamental principles and concepts that form the foundation of sustainability within corporate environments.
2. Explore the sustainability implementation model, focusing on effective measures and reporting strategies to track and communicate sustainability efforts.
3. Identify and define best practices and critical success factors essential for achieving sustainability goals within organizations.
CONTENTS
1. Introduction and Key Concepts of Sustainability
2. Principles and Practices of Sustainability
3. Measures and Reporting in Sustainability
4. Sustainability Implementation & Best Practices
To download the complete presentation, visit: https://www.oeconsulting.com.sg/training-presentations
Digital Transformation and IT Strategy Toolkit and TemplatesAurelien Domont, MBA
This Digital Transformation and IT Strategy Toolkit was created by ex-McKinsey, Deloitte and BCG Management Consultants, after more than 5,000 hours of work. It is considered the world's best & most comprehensive Digital Transformation and IT Strategy Toolkit. It includes all the Frameworks, Best Practices & Templates required to successfully undertake the Digital Transformation of your organization and define a robust IT Strategy.
Editable Toolkit to help you reuse our content: 700 Powerpoint slides | 35 Excel sheets | 84 minutes of Video training
This PowerPoint presentation is only a small preview of our Toolkits. For more details, visit www.domontconsulting.com
Personal Brand Statement:
As an Army veteran dedicated to lifelong learning, I bring a disciplined, strategic mindset to my pursuits. I am constantly expanding my knowledge to innovate and lead effectively. My journey is driven by a commitment to excellence, and to make a meaningful impact in the world.
Affordable Stationery Printing Services in Jaipur | Navpack n PrintNavpack & Print
Looking for professional printing services in Jaipur? Navpack n Print offers high-quality and affordable stationery printing for all your business needs. Stand out with custom stationery designs and fast turnaround times. Contact us today for a quote!
Affordable Stationery Printing Services in Jaipur | Navpack n Print
Embedded Profile Control | Unico.pdf
1. The Profiler software module precisely synchronizes automation with a press or
shear. The software is embedded directly within a Unico drive, eliminating the
need for an external motion controller. The Profiler can control single- or multiaxis
automation for in-press or between-press transfers and other press-following
applications. It provides coordinated motion control for up to 32 drives in as many
as 32 independent axes. Electronic line shafting eliminates the large gear boxes
and PTOs associated with mechanical systems, resulting in smoother motion,
greater flexibility, and reduced mechanical maintenance.
Multiple Applications
The Profiler can be programmed to control most types of between-press or in-press
transfer automation, including tri-axis and crossbar STFs, orientation stations,
loaders, unloaders, shuttles, and turnovers. It can also control swing shears and
oscillating dies.
Programmable Cam Profiles
Profile control emulates the motion curves provided by the cams of most mechanical
feed systems, including modified sine, modified cosine, trapezoidal, parabolic,
and asynchronous cycloidal. Custom profiles can also be created upon request.
Maximum SPM Calculation
The software calculates the maximum speed at which the automation can run
based upon the specified part profile and the motor, drive, and machine data. It
reports the segment of the motion profile that sets the limitation and identifies the
limiting factor. Using this information, the die setter can make adjustments that
optimize production and minimize machine wear, while the operator can be
prevented from running the equipment too fast.
Press Simulator
A built-in press simulator assists in die setup and troubleshooting by allowing the
automation to simulate automatic operation without moving the press. The simulator
can be jogged forward or reverse at one of two preset speeds and can be
configured either to automatically stop at the home position or to run continuously.
Smooth Start
Smooth Start technology starts the machine in automatic mode with the press on
top and the automation in a home position. The automation will not start moving
until the press reaches an angle that matches the automation home position.
Embedded Profile Control
Overview
Features
PROFILER
PROFILER
Embedded
Profile
Control
®
2. Smooth Stop
With Smooth Stop technology, the automation continues moving smoothly to its
home position while the press stops on top during a cycle stop.
Smooth Return
Smooth Return technology smoothes operation by insulating the automation
from the vibration and mechanical backlash of the press. The control dynamically
switches between following the press and following an internal simulator for a
portion of every stroke. The simulator is synchronized to the speed and position
of the press during the transition, and press position is continually monitored to
ensure that the simulator does not fall behind.
Smooth Transfer
Using Smooth Transfer technology, the drive switches from following one press
to another on the fly using an optimal trajectory to compensate for differences in
the velocity and position of the two presses. The automation leaves the first press
at a designated safe point then follows a simulated press angle that is generated
to match the velocity and position of the second press within the specified press
angle window. The automation then starts following the second press.
Programmable Limit Switches
An advanced Programmable Limit Switch (PLS) controller provides contact outputs
that turn on and off based on the position of the press, automation, or both. These
outputs can be used to control grippers, vacuum cups, die lifters, oil sprays, and
part tracking windows. Each PLS output has independent speed compensation
to ensure, for example, that grippers will open and close in the same place
regardless of press speed.
Off-Path Jog
Each axis controlled by the Profiler may be jogged individually without moving
the other axes or the press. The control can be configured to limit off-path motion
to the limits of the programmed motion path or to the mechanical travel limits.
Go-To Positions and Angles
As many as four go-to positions and four go-to angles can be configured for each
drive. For each go-to position, the user specifies where the axis will move to, how
fast it will move, and how much torque may be used during the move. These
go-to positions can then be selected with digital I/O to send the automation to the
preprogrammed positions. This is particularly useful for sequencing an automatic
die-change routine. Go-to angles similarly send the simulator to preprogrammed
positions that all synchronized drives will follow.
Multiple Referencing Schemes
The Profiler supports snug-up (positive stop) referencing, limit-switch referencing,
and learn/teach referencing. The drive does not need to be re-referenced every
time the machine is powered down if at least one of its feedback devices is an
absolute encoder. Referencing is only required if the encoder is replaced or its
coupling is loosened.
Multiple Motor Types
The controller supports any combination of motors, including AC induction,
brushless or permanent-magnet AC synchronous, and wound-field or permanent-
magnet DC motors.
Common Bus Architecture
Profiler drive systems use a common-bus architecture that allows multiple drives to
be tied together and share a single line-regenerative or non-regenerative front end.
The result is a more streamlined design that greatly reduces peak energy demands.
Embedded Profile Control
PROFILER
Features
(continued)
Position, velocity, and acceleration of a
profiling axis versus press angle for
different cam types
Subtle differences in velocity and acceleration
can make a significant difference in the
RMS or peak current required of the drive,
the peak velocity required by the motor,
and the G-forces exerted on the mechanics
and object being transferred
3. Embedded Profile Control
PROFILER
Event-Driven Data Logging
A built-in data logger can record any drive parameter or any analog, digital, or
serial I/O data within the drive. Multiple channels of data can be grouped into a
channel set, and multiple channel sets can be configured. Each channel and
channel set can be sampled at different
sample rates. Sampling can be continuous
or triggered by complex user-defined trigger
conditions. Captured data can be read and
displayed by an HMI in real time, subject to
limits of the serial connection, or buffered in
the drive for subsequent retrieval and
analysis. An optional memory expansion
module is also available that allows multiple
sample sets to be stored on a removable
SD memory card.
Program Extensibility
The control can be customized to a specific installation using UEdit™, a powerful
Windows-based programming tool that lets users add their own ladder logic and
function-block programming.
Multilevel Protection
Multiple levels of protection are employed to ensure operator and machine safety.
The drive detects numerous fault conditions such as RMS and peak overcurrent,
overtemperature, encoder loss, and power supply failure. The application detects
such conditions as feedback mismatch, twist between motors on the same axis,
press or simulator following errors, and communication errors.
Redundant Feedback
The Profiler supports redundant feedback for the press crank angle encoder as
well as for each drive/motor. If the system detects a problem with its primary
feedback device, it can automatically switch to the redundant encoder, flag a
fault, and bring the machine to a safe, controlled stop.
Zone Control
Multiple fault-handling zones allow drives to respond differently to certain faults
depending on the mode of operation and the position of the press.
Slave Takeover
Should the master drive fail on an axis that has one or more torque slaves, the
system can be configured to enable one of the slave drives to assume control to
bring the axis to a controlled stop.
The Profiler is designed to interface with a line-control PLC via a serial link
and/or digital I/O. The serial link is used for transmitting and receiving diagnostic
information and job-specific part data. Digital I/O are used for sending and
receiving control and status bits (for example, to jog the automation or to indicate
that the automation is ready to follow the press). If a high-speed protocol is used
for the serial link, it is possible to send the control and status bits serially and
eliminate the digital I/O. Supported protocols include:
• ControlNet™
• Modbus®
Plus
• EtherCAT
• Modbus®
TCP
• Profibus
• Ethernet IP
• AnyBus®
S-Slave
Features
(continued)
Safety Features
PLC Interface
4. All trade designations
are provided without
reference to the rights
of their respective owners.
Specifications subject to
change without notice.
2000.21(022) 5/20
Embedded Profile Control
PROFILER
Inputs/
Outputs
Status Bits
• motor on granted
• no faults
• press selected
• simulator selected
• synchronized
• simulator at home
• at position 1
• at position 2
• at position 3
• at position 4
• at storage
• auto selected
• E-stop request
• cycle stop request
• simulator moving forward
• simulator moving reverse
• press enable
• press at top
• axis straight
• snug-up complete
• part data OK
• drive moving
Control Bits
• motor on
• fault reset
• press mode
• simulator mode
• jog simulator forward
• jog simulator reverse
• jog forward
• jog reverse
• synchronize
• desynchronize
• home simulator
• snug-up
• go to position 1
• go to position 2
• go to position 3
• go to position 4
• store
• press running
• jog fast
• stop at home
• return with simulator
• stop with simulator
The Profiler has numerous control and status bits that can be mapped by the
user to digital or serial I/O within the drive.
Each drive supports up to 36 optically isolated digital I/O points that are directly
connected to the drive and can be individually configured as inputs or outputs.
As many as 32 additional optically isolated digital I/O points can be connected
through an OptoMux®
serial gateway. Each drive also supports up to four 16-bit
serial I/O input words, four 16-bit serial output words, four serial ADC words, and
four serial DAC words when using most high-speed protocols.
The control and status bits that can be mapped to these I/O bits include:
p t d u t
a x
Unico is a leading global innovator of motion-control solutions for industry. Founded in 1967, the
company develops, manufactures, and services variable-speed drives, application-engineered
drive products, integrated drive systems, and ancillary products that improve operations by
increasing productivity, safety, and equipment life while lowering energy and maintenance costs.