Hossam El-Sayed Ali El-Lawendy El-Moghazy is a Maintenance Manager at Americana Egypt for Cold Stores with over 7 years of experience in industrial refrigeration, HVAC, electro-mechanical maintenance and project management. He has a B.Sc. in Mechanical Engineering from Mansoura University and experience as an Operating and Maintenance Manager, Refrigeration Operation/Maintenance Engineer, and Project Executive Engineer. His responsibilities have included maintenance planning and budgeting, equipment purchasing, overseeing refrigeration and mechanical systems, and leading project execution.

1. Page 1 of 7
Curriculum Vitae
Name: Hossam El-Sayed Ali El-Lawendy El-Moghazy
Current Title: Maintenance Manager
Current Company: Americana Egypt for Cold Stores
Experience: Industrial Refrigeration, HVAC, Electro-Mechanical
Maintenance and Project Management
Personal Information:
Nationality: Egyptian
Date of Birth: 23-Mar-1988
Home Town: El Mansoura City - El Dakahlia
Current Address: 8th
settlement – El Obour City - Cairo
Social Status: Married
Military Service: Completed
Passport No.: A07924159
Telephone: +2 050 2795749
Cell: +20 106 883 1616 / +20 106 612 8198
E-mail: shadowman7ossam@gmail.com
Educational Information:
B.Sc. of Mechanical Engineering
Graduated from: Mansoura University, Faculty of Engineering, Mechanical Engineering
Department
Graduation Date: 31-Jul-2010
Graduation Degree: 65.7 % Good
Graduation Project: 6 Degree of Freedom Serial Manipulator (Armed Robot)
Project Degree: 99.2 % Excellent
Experience:
1. Maintenance Manager
Job Title: Operating and Maintenance Manager of Refrigeration System, Transportation
Equipments, Fire-Fighting System.
Company: Americana Egypt for Cold Stores.
From: January 01, 2015 Till: Now

2. Page 2 of 7
Responsibilities:
1. Updating and collecting data required for management reports.
2. Responsible for identifying Training Needs and execution of plans for the engineering teams.
3. Preparing & monitoring budgets and maintenance cost and expenses.
4. Outsources communication and negotiation.
5. Continual improvements and meet Key Result and Performance Criteria expectations in
accordance with the departmental expectations derived from business plans.
6. Analyze and determine what equipment to purchase/lease, and how they are to be equipped.
7. Prepare the Preventive Maintenance Plane and ensure the execution of it.
8. Ensure overall activity to manage the level of spare parts.
9. Monitoring Overall Equipment Efficiency (OEE) and define continuous improvement plans
by leading daily and weekly meeting.
10.Supervise electro mechanical work including but not limited to generator, ATS, UPS,
electrical wiring, cabling, HVAC, plumbing, fire fighting, fire alarm, and other mechanical
equipments.
11.Devising cost-control maintenance measures.
12.Monitoring and reporting the cause of any reoccurrence breakdown calls.
Job Description:
My job is leading the Operating Process and creating the Periodical and Predictive Maintenance
Plans and ensuring the execution of these plans by the right way, also estimate the cost of the
whole maintenance process and try to reduce it by the way which keep the quality of this
maintenance. This Maintenance can be classified to Maintaining Refrigeration, Air Conditioning,
Fire Fighting, Plumping, Water Supply, Water Treatment, Ventilation, Humidification systems
and Fleet Equipment (Forklifts, Pickup trucks, conveyor).
That means Maintaining of:
1. Compressors: (GEA/FES Compressor Package) Overhaul Operation, Oil Filter Changing, Oil
changing and charging, Cleaning the Suction Filter, Calibration of the Position sensor,
changing the shaft seal, realigning the coupling, greasing the motor ball bearing, changing
the oil fine filter cartridges, fixing any fault from sensors, thermostatic 3 way valve adjusting
and adjusting all the operating parameters.
2. Ammonia Pumps: Overhaul Operation, Oil charging, and Electrical Problems.

3. Page 3 of 7
3. Valves and strainers: (Parker, Revalco, Hansen and Danfoss) working with a variety of
valves’ models making all cleaning processes, fixing problems of PM valves, adjusting all
regulators, check defrost.
4. Evaporative Condenser: (Baltimore) all cleaning processes, air ventilation, bearing greasing,
check the belts, check water pump, check and change the Float Valve, check the water total
hardness, Total Dissolved Solids, Phosphate, Chloride and Iron to adjust the amount of
bleeding water.
5. Evaporator: Changing the ring heater, drain heater, fan motor, blades.
6. Firefighting Pumps: System Installation, Pump Electro-Mechanical Maintenance.
7. Softener: (water treatment) adjusting the softener cells, changing the risen, fixing the control
unit, chemical adjustment.
8. Electrical Forklift: (STILL, JUNGHAIRUINCH and B.T) Preventive Maintenance, Oil Hose
changing, Electronic and Mechanical Problems Detection.
9. Diesel Forklift: (TOYOTA, TCM, KOMATSU, CAT) Preventive Maintenance, Mechanical
Problems Detection.
References:
Eng/ Moustafa Abdou Refrigeration Consultant
Tel: +20 100 533 4997 E-mail: mafes-me@internetegypt.com USA Tel. #: (717) 889-8807
Eng/ Mahmoud Shehata Refrigeration Consultant
Tel: +20 100 145 6333 E-mail: shehata65@yahoo.com
Eng/ Ahmes Salib Refrigeration Consultant - ASHRAE Member and IOR fellow
Tel: +20 100 170 3897 E-mail: ahmesalib@hotmail.com
2. Refrigeration Operation / Maintenance Engineer
Job Title: Operating and Maintenance Engineer of Refrigeration System
Company: Logistics for Storage Services
From: July 01, 2013 Till: Dec 31, 2014
Responsibilities:
1. Perform moderately complex duties in the electrical, electronic, electromechanical, or
mechanical areas.
2. Interpret electrical and mechanical drawings, specifications, and control diagrams.
3. Handle, implement and address all maintenance issues within site equipment.
4. Ensure timely preventive and corrective maintenance is made to all site equipment.

4. Page 4 of 7
5. Follow up & escalate any major electro-mechanical issues identified and ensure a timely
resolution.
6. Prepare technical reports for proper documentation and provide updates to the direct
Manager.
7. Practice duties and roles in line with the authorities as illustrated in the authority matrix
8. Designing and implementing cost-effective equipment modifications to help improve safety,
reliability and throughput
Job Description:
My job is supervising the Operating Process and creating the Periodical and Predictive
Maintenance Plans and ensuring the execution of these plans by the right way. This
Maintenance can be classified to Maintaining Refrigeration, Air Conditioning, Fire Fighting,
Plumping, Water Supply, Water Treatment, Ventilation, Humidification systems and Forklifts.
That means Maintaining of:
1) Compressors: (GEA - Grasso Compressor Package) Oil Filter Changing, Oil changing and
charging, Cleaning the Suction Filter, Calibration of the Position sensor, changing the shaft
seal, realigning the coupling, greasing the motor ball bearing, changing the oil fine filter
cartridges, fixing any fault from sensors, thermostatic 3 way valve adjusting and adjusting all
the operating parameters.
2) Ammonia Pumps: adjusting the parameters of the pump.
3) Valves and strainers: (Parker and Danfos) all cleaning processes, fixing the problem of PM
valves, adjusting all regulators, check defrost.
4) Evaporative Condenser: (Baltimore) all cleaning processes, air ventilation, bearing greasing,
check the belts, check water pump, check the Float Valve, check the water total hardness and
TDS to adjust the amount of bleeding water.
5) Evaporator: Changing the ring heater, drain heater, fan motor, blades.
6) Humidification pumps: changing hydraulic oil, filter changing, changing the belts, fixing all
the pump problems, adjusting the pump parameters.
7) Glycol pumps: pump overhaul, adjusting the pump parameters.
8) AHU: cleaning the filters, check the belts.
9) Firefighting pump: pump operating, pump mechanical maintenance.
10)Softener: (water treatment) adjusting the softener cells, changing the risen, fixing the control
unit, chemical addition.
11)R.O water treatment unit: rising the efficiency of the unit, adjusting the control system.

5. Page 5 of 7
12)Forklift: changing the hydraulic oil, all predictive and preventive maintenance, gearbox oil,
brakes oil, greasing slide parts.
13)Dock Leveler: change oil, parameters adjustment, mechanical and control maintenance.
14)Sliding doors: changing wires, parameters adjustment, door development, mechanical and
control Maintenance.
References:
Eng/ Mahmoud Shehata Refrigeration Consultant
Tel: +20 100 145 6333 E-mail: shehata65@yahoo.com
Eng/ Ahmes Salib Refrigeration Consultant - ASHRAE Member and IOR fellow
Tel: +20 100 170 3897 E-mail: ahmesalib@hotmail.com
3. Project Executive Engineer
Job Title: Project Engineer for Refrigeration Electro-Mechanical works
Company: The International Association for Refrigeration and Air Conditioning Systems.
From: Dec 1, 2011 Till: June16, 2013
Job Description:
My job is leading the team work to execute the designed systems and ensure that these works
have been done in the right way and according to approved drawings and international standards.
These works can be classified to Piping, Air Conditioning, Drain Systems, Water Supply,
Humidification, Air Refreshment, Valve Stations Building, Mechanical Supporting and Hanging,
Coupling Aligning by Laser Aligning Device, Pressure Testing, System Vacuuming, Refrigerator
Charging, Full System Commissioning and Start Up.
These works contains a lot of parts and components like Compressors, Chillers, PHE, AHU,
Chillers, Condensers, Evaporator, A lot types of Pumps (Water Pumps – Ammonia Pumps –
High Pressurized Humidification Pumps – Diesel Pumps – Jockey Pumps) , A lot types of
Valves, A lot types of sensors, Gauges.
Responsibilities:
1. Responsible for ensuring safe working practices and procedures
2. Ensure all required materials and resources are arranged for timely execution of the project.

6. Page 6 of 7
3. Knowledge of Electrical designs and drawings.
4. Follow-up with the contractor to ensure that the design and actual deliverables match as per
standards.
5. Set clear performance objectives that are clear, specific, challenging and achievable and
provide regular and appropriate performance feedback to staff.
6. Estimate project budget and schedule.
7. Plan and schedule project timelines.
8. Manage and coordinate in liaison with the project leads, all testing and commissioning
works including interface with client and other contractors on site.
9. Provide technical support and guidance to sub- contractors on the work site to ensure
Operational Acceptance Tests are carried out to the appropriate standards.
10.Carry out hands-on dynamic system commissioning.
11.Witness and verify Contractor Mechanical completion & pre-commissioning activities.
12.Develop Commissioning Installation and pre-functional equipment checklist.
13.Create Functional Acceptance Test documents in line with Design Specification of the
equipment.
14.Review of documents and as build drawings before taking handover of the projects.
Projects:
1- Logistics for Storage Solutions, Abou – Rawsh, Giza, Egypt.
2- Orion for Juices, 3rd Industrial Zone, 6th October City, Giza, Egypt.
References:
Eng/ Nabil El-Shabrawy Chairman of the association
Tel: +20 122 322 3250 E-Mail: nsabrawy@yahoo.com
Mr. Joseph. A McCann Projects Supervisor at GEA
E-Mail: joe.taragh1@yahoo.com
Eng. Haytham Alzghoul Sr. Instrumentation Engineer at GEA
Tel: +971 (0)6 5343808 E-Mail: haytham@grasso-adearest.com
Eng/ Mahmoud Shehata Refrigeration Consultant
Tel: +20 100 145 6333 E-mail: shehata65@yahoo.com
Eng/ Ahmes Salib Refrigeration Consultant - ASHRAE Member and IOR fellow
Tel: +20 100 170 3897 E-mail: ahmesalib@hotmail.com

7. Page 7 of 7
Skills:
 Supervision of TIG Welding and Electrical Arc Welding.
 Supervision of Sealing in refrigeration valve station systems.
 Scheduling Pressure Test for whole refrigeration system.
 Design the Hanging and the supporting for any components in any system.
Courses:
 Air conditioning and Ventilation Systems.
 CATIA Mechanical Design and Stress Analysis Program.
 Auto CAD Mechanical Design.
 Micro-Controller Applications.
 Shapping, Turninig, Milling, and Welding.
Computer Applications and IT skills:
 Mechanical Design and Essential Solid Works.
 MS Office.
 Internet Applications.
Language skills:
 Arabic: Mother tongue.
 English: Very good (written & spoken).
Other Personal Skills:
 Knowledge of both theoretical and practical aspects of project management
 Knowledge of project management techniques and tools
 Strong communication and negotiation skill.
 Accurate, Good analytical skills and willing to learn.
 Co-operative in teamwork aiming to get the job done by all available means.
 Strong decision maker and problem solver with multi-task capability.
 Team work problem solving and decision making, able to handle problems.
I hope to join your successful team