Egret Mfg. is a manufacturer of aluminum foil tape, HVAC foil tape, insulation tape, PVC pipe tape, and other adhesive tape.

1. CONTENTS
Industry Credits
Qualification Certificate
Page 15
Page 16
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Company Introduction
Aluminum Foil Tape With Liner
Aluminum Foil Tape Without Liner
Aluminum Foil Laminated Tape
Polyester (PET) Tape
Polyethylene (PE) Tape
Masking Tape
Polypropylene（BOPP）Tape
Polyethylene (PE) Protective Film
PE Wrapping Film
PVC None Adhesive Tape
Kraft Tape
Cloth (Duct) Tape
Double Side Tape
Reference
1997
10
20
40
60
80
2000 2002 2004 2006 2010 2012 2014 2016
1997-2016 Egret Tapes Annual Sales Volume (Million RMB)

2. Egret Workshop 胶粘带系列
PRODUCT PRESENTATIION
Factory Birds View
Changzhou Egret Electric Equipment Co., Ltd.
AKA. Egret Mfg.
A Leading Producer of Industrial Tapes in China
www.egretmfg.com

3. 胶粘带系列
PRODUCT PRESENTATIION
2
● with pure aluminum foil as the base material and release paper as the substrate, the products are
coated with hot melt adhesive, factice or glue, and made of high quality acrylic adhesive, with good
stickiness, strong adhesion and anti-aging effect.
● Applicable to encapsulate the
evaporation pipelines for refrigerator,
freezer and other refrigeration
systems;
● To encapsulate the reflection
places, such as indoor air condition-
ing pipes, water heaters and heat
pipes.
Composition and characteristics
Main usage
BLATP-101 0.015mm ≥15＃ ≥2n/cm
≥3n/cm
≥4n/cm
≥6n/cm
≥4n/cm
≥6n/cm
≥4n/cm
≥6n/cm
≥24h ≥12n/cm
≥12n/cm
≥20n/cm
≥20n/cm
≥28n/cm
≥28n/cm
≥35n/cm
≥35n/cm
≥24h
≥24h
≥24h
≥24h
≥24h
≥24h
≥15＃
≥15＃
≥15＃
≥15＃
≥15＃
≥15＃
≥15＃
0.015mm
0.03mm
0.03mm
0.04mm
0.04mm
------------
----------
------------
BLATP-102
BLATP-103
BLATP-104
BLATP-105
BLATP-106
BLATP-107
BLATP-108
Water-Based Pure
Pure
Pure
Pure
Pure
Reinforced
Reinforced
Reinforced
Solvent-based
Water-Based
Solvent-based
Water-Based
Solvent-based
Water-Based
Solvent-based
Code
Acrylic
Adhesive
Category Thickness
Initial
Stickiness
180°Peeling
Strength
Permanent
Adhesion
Tensile
Strength
The above parameters are for reference only,
and special requirements can be applicable according to actual demands of users
Aluminum Foil Tape With Liner
About Us
Egret Mfg. is located in Changzhou City, Jiangsu
Province, China. Changzhou is a time-honored historic
city with cultural deposits, and has been a national leading
city in economy, culture, education and other aspects.
The company has superior geographic location, and the
transportation is very convenient. The company is in
China's economically developed Yangtze Delta region,
and beside No. 312 national highway, Beijing-
Hangzhou Grand Canal, Beijing-Shanghai High-
speed Railway and several other highways are
through here. It takes only 2 hours by car from the compa-
ny to Shanghai Pudong International Airport, and also
only 1 hour to Nanjing Lukou International Airport via a
direct airport freeway.
Founded in 1997, the company covers an area of 20,000
square meters, with a total construction area of
30,000 square meters. The company, with a spacious
production environment, is a manufacturer specializing
in adhesive tape and pressure controller.
Adhesive tape series, one of the company’s
products include aluminum foil tape, PE adhesive tape,
PET adhe-sive tape, Foaming tape, Sponge tape and
masking tape,
all of which are widely used for insulation of refrigerators,
evaporators and other refrigeration equipments. Also, it
can be used in civil building material, auto interior trim,
electronic industry,energy conservation and environmental
protection markets.
Egret Mfg. boast advanced production facilities, includ-ing
6 automatic coating machines and 8 automatic cutting
machines. We own completed testing equipment, and
strong technical force, including the constant temperature
&humidity laboratory.
The company first adopted the ISO9001:2008 quality
system certification and ISO 14000 environment quality
system certification in the same industry. Parts of the main
products have passed CQC,UL,TUV/CE,REACH and other
quality system certifications.
Company firstly corporate with world famous home
appliance companies which are Haier,Media,Meiling,Whirl-
pool,Arcelic, Starion, sanyo ,Baixue，Chigo, Beko,
Samsung, LG,TCL and etc.
1

4. 胶粘带系列
PRODUCT PRESENTATIION
4
胶粘带系列
PRODUCT PRESENTATIION
3
with pure aluminum foil as the base material, the back of the base material is coated
with release agent or special release agent, and the front face is coated with factice or
glue.
● Applicable to encapsulate the evapo-
ration pipelines for refrigerator, freezer
and other refrigeration systems, and
also to encapsulate the indoor air condi-
tioning pipes, water heaters and heat
pipes.
● Compared to lined aluminum foil
tapes, its usage process is easier and
faster, which can keep the surrounding
environment clean and tidy; the back of
the base material coated with special
release agent can be linked with
polyurethane foam, and its insulation
sealing performance is more reliable
and solid.
BLATNP-201 0.03mm ≥15＃ 4n/cm ≥24h ≥20n/cm
≥20n/cm
≥20n/cm ≥60%
-----------
-----------
-----------
-----------
≥60%
≥28n/cm
≥28n/cm
≥28n/cm
≥24h
≥24h
≥24h
≥24h
≥24h
6n/cm
7.5n/cm
4n/cm
6n/cm
7.5n/cm
≥15＃
--------
--------
≥15＃
≥15＃
0.03mm
0.03mm
0.04mm
0.04mm
0.04mm
BLATNP-202
BLATNP-203
BLATNP-204
BLATNP-205
BLATNP-206
Code
Acrylic
Adhesive
Alumi Foil
Category
Thickness
Initial
Stickiness
180°Peeling
Strength
Permanent
Adhesion
Tensile
Strength
Polyurethane Foam
Adhesive Rate on
Back of Base Material
Water-Based Pure
Pure
Pure
Pure
Pure
Pure
Water-Based
Solvent-based
Solvent-based
Solvent-based
Solvent-based
Composition and characteristics
Main usage
The above parameters are for reference only,
and special requirements can be applicable according to actual demands of users
Aluminum Foil Tape Without Liner
Composition and characteristics
Main usage
with aluminum foil as the base material, the back of the base material is coated with
a layer of polypropylene (BOPP) or polyethylene (PE) film and coated with special
release agent, and the front face is coated with factice or glue.
● Applied for encapsulating and winding evaporation pipelines for refrigerator, freez-
er and other refrigeration equipment, this tape has outstanding sealing and heat
preservation performance, and it is easy and convenient to operate.
● The back of the products 303 and 304 is applied with special release agent and
then they can be connected with polyurethane foam, so the heat sealing perfor-
mance is more outstanding.
BLAMT-301 ≥0.07mm ≥15＃ 4n/cm ≥24h ≥25n/cm
≥25n/cm
≥25n/cm ≥60%
≥60%≥25n/cm
≥24h
≥24h
≥24h
6n/cm
7.5n/cm
7.5n/cm
≥15＃
-------
-------
-------
-------
≥0.07mm
≥0.07mm
≥0.07mm
BLAMT-302
BLAMT-303
BLAMT-304
BOPP
BOPP
PE
BOPP
Code
Acrylic
Adhesive
Category Thickness
Initial
Stickiness
180°Peeling
Strength
Permanent
Adhesion
Tensile
Strength
Polyurethane Foam
Adhesive Rate
Water-Based
Solvent-based
Solvent-based
Solvent-based
Aluminum Foil Laminated Tape

5. 胶粘带系列
PRODUCT PRESENTATIION
6
胶粘带系列
PRODUCT PRESENTATIION
5
Composition and characteristics
Main usage
● With polyester film as the base material, the back of the base material is coated
with release agent, and the front face is coated with factice or rubber;
● This tape is able to quickly paste with a target and is easy to peel, but does not
move.
● Applied for fixing refrigerators and freezers,
● Used for covering high temperature paint, baking varnish and coating to make
the not painted areas well protected, in order to prevent from unnecessary
influence and damage;
● Also used for high temperature protection of electronic components, etc.
BLPET-401 ≥6＃ ≥2n/cm ≥24h ≥35n/cm 120°/2h Transparent
120°/2h
120°/2h
120°/2h
≥35n/cm
≥35n/cm
≥35n/cm
Blue
Transparent
Blue
≥24h
≥24h
≥24h
≥2n/cm
≥2.5n/cm
≥2.5n/cm
≥6＃
≥4＃
≥4＃
BLPET-402
BLPET-403
BLPET-404
0.036mm
0.036mm
0.036mm
0.036mm
Rubber-based
Solvent-based
Code
Tensile
Strength
Temperature
Resistance
Color
Solvent-based
Solvent-based
Acrylic
Adhesive
Thickness
Initial
Stickiness
180°Peeling
Strength
Permanent
Adhesion
Polyester (PET) Tape
● With polyethylene film as the base material, the back of the base material is coated with
special release agent, and the special release agent can bond with polyester foam;
● The front face is coated with rubber pressure-sensitive adhesive and it is characterized
by good thermal insulation and sealing performance
Applied for winding, insulation and sealing of pipeline systems in refrigerators, freezers
and other refrigeration equipment.
Composition and characteristics
Main usage
Initial
Stickiness
180°Peeling
Strength
BLPE-501
0.08mm
±0.01
≥30min ≥3.5n/cm ≥24h ≥300% ≥10n/cm Opacified ≥90%
Permanent
adhesion
Strehch
Force
Tensile
Strength
Color
Polyurethane Foam
Adhesive Rate
Code
Acrylic
Adhesive
Rubber
Type
Thickness
Polyethylene (PE) Tape

6. 胶粘带系列
PRODUCT PRESENTATIION
7
胶粘带系列
PRODUCT PRESENTATIION
8
Composition and characteristics
Main usage
● With crepe paper as the base material, the base material surface is coated with surfactant, and the
front face is coated with pressure-sensitive adhesive, so that it can paste quickly and it is easy to peel;
● It is easily broken if it is tore with hand, and it is convenient by writing.
● Applied in high-temperature painting, baking varnish, coating covering and
electronic industry, etc.
● Used for coverage of paint and coating in indoor decoration, light dressing,
etc.
≥8＃ 2.4n/cm ≥2.5h ≥24n/cm ≤20%
≤20%
≤5-15%
≤20%
≥30n/cm
≥30n/cm
≥32n/cm
120°/60min
150°/60min
82°/60min
-------------
≥8h
≥13h
≥15h
2.4n/cm
2.8n/cm
3.0n/cm
≥8＃
-------
≥10＃
BLMT-6307C 140±10 um
150±5um
155±10um
155±10um
Code Material Thickness
Initial
Stickiness
180°Peeling
Strength
Permanent
Adhesion
Strehch Force
Fracture
Strenching
Highest
Temperature
Crepe Paper
Crepe Paper
Crepe Paper
Crepe Paper
Masking Tape
with polypropylene (BOPP) as the base material, the products are
coated with water based pressure sensitive adhesive.
suitable for sealing, packaging, winding, etc
Composition and characteristics
Main usage
Polypropylene（BOPP）Tape
Code Thickness Initial Tack
180°Peeling
Strength
Permanent Adhesion Strench Force
Fracture
Strenching
≤150%BLBOPP-701 0.045-0.055mm ≥2.0N/cm ≥2.0N/cm ≥15h ≥30N/cm
BLMT-6528G
BLMT-6519
BLMT-6558

7. 胶粘带系列
PRODUCT PRESENTATIION
9
胶粘带系列
PRODUCT PRESENTATIION
10
BLPWF-09 series is a stretch film with LLDPE as based material with self viscosity, high transparency, non-toxic environmental
protection, high longitudinal tensile rate, horizontal high tear strength which are widely used in various types of tray packing and
collective packing to achieve waterproof and dust-proof of products.
● Product category: handing used and machinery used
● Easy to release
● Super transparent
Production Description
Technology data
Feature
PE wrapping film
BLPWF-901
BLPWF-902
20mic
25mic
100-500mm
100-500mm
900-2000m
900-2000m
1-5kg
1-5kg
Code Thickness Width Length Kg/roll
Composition and characteristics
Main usage
● With polyethylene as the base material, it is coated
with special pressure-sensitive adhesive, which is
characterized by rapid bonding, easy to tear, easy
stripping and obvious heat resistance, with no residue.
● With a variety of colors to distinguish, such as trans-
parent, blue, green, black, black and white bicolor
(printable pattern color)
● Mostly used for stainless steel, colored steel sheet,
decorative sheet, plank, drill plastic plate, painted
board, plastics panel, glass and all other materials
and products that need for surface protection.
● Used for security doors, refrigerators, freezers and
other home appliances.
BLPT-801 0.03mm-0.10mm 100mm-2500mm 10mm-1600mm ≥180% 10-1500g/50mm
Code Thickness Length Width Elongation Viscosity
Polyethylene (PE) Protective Film

8. 胶粘带系列
PRODUCT PRESENTATIION
11
胶粘带系列
PRODUCT PRESENTATIION
12
Mainly used for the cartons sealing, especially for the carton package paper.
●BLKPT-10 series is a tape that has a type of instant sticky type;
●Suitable for various special bonding surfaces and objects with different shapes;
●Kinds of material and adhesive types available;
●Easy degradation without pollution.
Technology data
Feature
Application
Kraft Tape
BLKPT-1001
BLKPT-1002
BLKPT-1003
BLKPT-1004
120mic
140mic
140mic
145mic
≥1h
≥1.5h
≥24h
24h
≥14
≥20
≥12
≥10
Code ThicknessGlue Holding power Adhesive to steel (N/25mm)
Hot melt
Solvent
water
Technology data
Feature
Application
Production Description
Widely used for heavy packaging and pipe wrapping, carpet joints and
affixing.
BLDTP-11 series is a tap that take textile fiber cloth as the backing and
coated with pressure sensitive adhesive.
● Strong adhesion, high tensile strength, protecting the surface from rust,
humidity, water as well easy tear.
● Color: Sliver Black Brown Green Red Yellow Blue White
Cloth (Duct) Tape
BLDTP-1101
BLDTP-1102
BLDTP-1103
BLDTP-1104
BLDTP-1105
BLDTP-1106
130mic
170mic
210mic
210mic
230mic
280mic
≥3.8N/cm
≥4.1N/cm
≥5.4N/cm
≥5.4N/cm
≥3.8N/cm
≥4.3N/cm
≥24h ≥20N/cm
≥24N/cm
≥28N/cm
≥30N/cm
≥32N/cm
≥40N/cm
≥24h
≥24h
≥24h
≥24h
≥24h
≥3#
≥5#
≥3#
≥5#
≥10#
≥8#
Code Total thicknessGlue Peeling Holding power Tensile strengthTacking
Hot melt
Hot melt
Hot melt
Rubber
Rubber
Rubber

9. Technology data
Feature
Application
● Suitable for cutting and stamping;
● For application in bonding and fixation of badge plates, film switches, refrigerator evaporator labels and insignia;
● Widely used in the assembly of electronic devices such as household appliances and cellphones, etc.
● Good initial adhesion/ holding power, excellent softness.
● Corrosion resistance and good anti-aging performance
● Wide application and comply with the international environmental standard.
● Surface release material: white double-sided release paper.
● Backing material/color:light white or black cotton paper.
● Adhesive: white solvent pressure-sensitive adhesive on double sides.
Double-sided Tape
BLDS-1301
BLDS-1302
BLDS-1303
100±5um
90±5um
80±5um
-5~80℃
-5~80℃
-5~80℃
12
9
9
3
1
1
14#
11#
10#
Code Total thickness
Temperature
Resistance
180°striping resistance
(N/25mm)
Holding power Initial adhesive
胶粘带系列
PRODUCT PRESENTATIION
14
胶粘带系列
PRODUCT PRESENTATIION
13
● Mainly used for insulating wrapping of electric
wires and cables.
● It can be used for protecting the floor, packing
the joints, tape warp the air condition connect-
ing tube and others in the construction site.
BLPVC-12 series is a tape for air conditioner
pipe protection, electric insulation protection,
wrap air conditioner connecting tube and has
good tensile and fireproof, it can be customized
available.
Technology data
Feature
Application
PVC No Adhesion Tape
BLPVC-1201 White
White(ducker)
Green
BLPVC-1202
BLPVC-1203
150
180
200
4.5
5.0
7.0
≥100%
≥120%
≥150%
Code Thickness (mic) Basic Weight (g/㎡ )
Tensile strength
(g/25mm)
Elongation Color
180
200
220

10. 胶粘带系列
PRODUCT PRESENTATIION
15
Industry Credits

11. 胶粘带系列
PRODUCT PRESENTATIION
16
胶粘带系列
PRODUCT PRESENTATIION
33
Qualification Certificate
产品认证证书（覆膜铝箔）
商标注册证检测报告（覆膜铝箔胶带）
环境管理体系认证证书 质量管理体系认证证书
产品认证证书（PE胶带）