MRO Product Range from Project Sales Corp, India

PR Log - Global Press Release Distribution

Project Sales Corp brings in a sealing compound for sealing end-shields in Generators

By Satish Agrawal
Dated: Nov 09, 2011

Gas Turbine Generator End Shield Flanges - The application requires a sealant to be pumped in through
the channel by a air dispensing equipment. Project Sales Corp introduces a sealant to address this need.

The generator rotor bearings, the hydrogen shaft seals, and oil passages supplying oils to these parts, are
contained and/or supported by the outer end shields. The end shields are split on the horizontal centerline
facilitating their removal. The joints between the shield halves and the joints between the shields and the
stator frame are to fitted and provided with grooves for the insertion of a sealing compound, to seal the
hydrogen gas in the generator casing. The application requires a sealant to be pumped in through the
channel by a air dispensing equipment. This product is intended to remain in
a putty-like state indefinitely, and will swell slightly when in contact with most fuels, tightening the seal in
service.

The product Q4-2805 is a sealant material designed to be injected into channels to form a watertight seal.
It is designed to survive harsh environments where most conventional sealants fail. It is highly resistant to
contact with solvents, fuels, oils, and many industrial chemicals. Upon exposure to common fuels, this
sealant will swell slightly, tightening the seal during service. Its a non-curing product and can withstand
immersion in fuels and temperatures upto 200 deg C. With excellent flow charactersistics it can be injected
with 223AR-6 Grover Automatic Reciprocating Fluorosilicone Sealant Gun with Cylinder for 6 - 7oz from
Grover Manufacturing, USA. Q4-2805 is is effective in sealing Electric Power Generator End Shield
channels on Power Generation stations requiring weather resistance and temperature extremes. It has a
continuous use temperature range of -55 o C to >200 o C and is not affected by UV or other environmental
factors.

Q4-2805 is designed to be injected into a flange and remains in a putty like consistency.

Q4-2805 increases the reliability in sealing the generator end shield - a critical equipment for continuous
operation of the power plant. Use of the product improves reliability of equipment.

An unscheduled outage can cost a power station in $50000 dollars and more. Use of a reliabile proven
product (also approved by GE with a Part No. for use with their Equipment) avoid unscheduled stoppages
and downtime. GE Approved Part No.164A738P0009

Call Satish Agrawal on +91-98851-49412 or email sales@projectsalescorp.com to know more.

###

About us:
We are Importers, Marketers and India Distributors for a host of high performance gasketing brands like
Hylomar, Birkosit, Arexons, etc. used in power plant turbines/compressors and count among our customers
original equipment manufacturers like Bharat Heavy Electricals Limited, Siemens, MAN Turbo, Maruti
Udyog, Alstom, GKN Driveline, Renk Bearings, Kirloskar, Bombardier, Dresser Rand, and power stations
including Lanco, Tata Power, Torrent, Surat Lignite, NTPCs, NPCIL, APGENCO, OPGC, Essar Power,
JSW, Tata Steel Captive, Nalco CPP, GVK, GMR, SEPCO, etc.

Category Sealing Compounds, Gasketing, Bonding

Page 1/2


Tags generator, end-shields, stator, sealing
Email Click to contact author
Phone 09885149412
Fax 08912590482
Address 28 Founta Plaza, Suryabagh
Visakhapatnam, India
City/Town Visakhapatnam
State/Province Andhra Pradesh
Zip 530020
Country India
Link http://prlog.org/11720197

Scan this QR Code with your SmartPhone to-
* Read this news online
* Contact author
* Bookmark or share online

Page 2/2

Project Sales Corporation

Sole Importers and Marketers
http://india.birkosit.com

BIRKOSIT Dichtungskitt ® is a single-component, paste luting agent/sealing
material for industrial use wherever conditions of temperature combined with
pressure on smooth, plane sealing surfaces (butt joints) make extreme demands on
the quality of the sealing compound. This applies, in particular, to the sealing of
metallic joints in: steam
and gas turbines, compressors,
generators, expanders, pumps, flange joints, etc.
Five good reasons why you need to chose Birkosit for you sealing needs:

1. Temperature resistance
BIRKOSIT Dichtungskitt ® withstands hot steam and air, hot and cold water, light fuel oils
and lubricants, as well as crude oil and natural gas at temperatures of up to 900 °C.

2. Pressure Resistance
The adhesion on sealing surfaces and butt joints is so high that a one hundred
percent seal is guaranteed even for pressures up to 250 bar.
The pressure resistance for flanges without sealing rings is guaranteed up to 450 bar, and
even up to 550 bar for screw joints.

3. Service life
When used in accordance with instructions and with regular servicing as
required for steam and gas turbines, we guarantee a service life of 10 years for use on
machined sealing surfaces (butt joints) with a finishing accuracy of Ra = 0.8 μm to 1.2 μm.
For high-pressure turbines (H), medium-pressure turbines (M) and low-pressure turbines
(L) we guarantee that the product will withstand hot steam and hot air, hot and cold water,
light fuel oils and lubricants as well as crude oil and natural gas up to 900°C and withstand
pressure up to 250 bar.

4. Storage Life
If stored correctly, we guarantee a service life of the product in the tin of 5 years.
Opened tins - If the tins are resealed correctly after partial use, we guarantee a service life
of the product of 3 years.

5. Spreadability
Birkosit can be easily applied on the flange surface with a putty blade (you will get them
free with the shipment you receive from Project Sales Corp) and as it contains linseed oil
instead of solvents, it spreads easily on the flange surfaces.

28 Founta Plaza, Suryabagh, Visakhapatnam 530 020, AP India. Phone: + 91 891 2564393; 6666482
Fax +91 891 2590482. sales@projectsalescorp.com; www.projectsalescorp.com

WHAT’S COMMON TO THE
FOLLOWING OEMS?

One Word

All leading turbine makers in India and Europe rely on Birkosit® Sealing
Compound to make the equipment more reliable. Developed in close co-
operations with Siemens, this is the only sealing compound worldwide,
since 1952, developed specifically for steam and gas turbines.

Unique Advantages of Birkosit

Temp Resistance 900C I Pressure Resistance 250 bar I Service Life of
10 years I Storage Life 5 years I Better Gap Filling Properties
Easy Spreadability

Marketed in India by Project Sales Corp under a General Agency Agreement with AI Schulze
Chemotechnische Fabrik e.K. Theodor-Körner-Str. 3a 02826 Görlitz. Call +91-98851-49412

All logos and trademarks are the property of the respective trademark owners.

Avoid leakages in all of your critical high
temperature and high pressure flange joints

Steam and Gas Turbines Flanges Compressors Flanges

Expanders Flanges Hot Blast Valves Split Casing Pumps

High Pressure Valve Joints Steam Generator Fittings Pipeline Flange Gaskets

Bringing reliability to sealing high temperature high pressure flanges, since 1952

Marketed in India by Project Sales Corporation, 28 Founta Plaza, Suryabagh, Visakhapatnam 530020,
Andhra Pradesh. Call +91-891-2564393, Fax +91-891-2590482, sales@projectsalescorp.com
http://india.birkosit.com. A product of A.I. Schulze Chemotechnische Fabrik e.K, Görlitz, Germany

silicone fluids, sealants and compounds
from project sales corp.

Dow Corning 55 O ring Dow Corning 3145 RTV -Clear Dow Corning DC 200 Fluid
Lubricant and Grey MECHANICAL FLUID: Excellent viscosity-
Dynamic lubrication between rubber Non-flowing; translucent or gray temperature characteristics, thermal and
and metal parts, especially in versions; high tensile, chemical stability, shear-breakdown
pneumatic systems. Slightly swells O- elongation, peel and lap shear values; resistance, compressibility,
rings to provide a tight seal; useful for Mil Spec applications; 3145 and rubber compatibility make DOW
wide service temperature range; Clear contains UV indicator for CORNING 200 Fluid outstanding for
resists oxidation.Light beige to automated inspection; 3145 Gray mechanical/ hydraulic uses. Typical uses
pink, lithium soap thickened, silicone particularly good for high temperature include hydraulic stabilizers, damping
grease. applications media.

Dow Corning Heat Sink Dow Corning 4 Compound Molykote 970 High Vaccum
Compound Dielectric moisture barrier on electrical Grease
Thermal coupling of equipment. High dielectric strength; Sealing and lubricating vacuum and
electrical/electronic devices to heat least tacky of Dow Corning silicone pressure systems. Low volatility to hold
sinks. High thermal conductivity; low compounds; deep vacuums; resists oxidation; non-
bleed; stable at high temperatures. moisture and ozone resistance; meets gumming; good chemical and thermal
White, grease-like silicone heavily MIL spec, Medium consistency, stability. Translucent white, heavy-
filled with heat-conductive translucent white, grease-like silicone consistency, non-melting grease-like
metal oxides. paste. silicone.

Dow Corning 5 Compound Dow Corning 111 Compound Dow Corning OS2 Silicone
A dielectric compound used on General purpose O-ring and valve Cleaner and Prep Solvent
insulators and bushings; as a lubricant. Provides a non-curing A low surface tension cleaning agent for
lubricant for high-current switches. moisture barrier; high dielectric softening cured silicones, degreasing
Nonconductive; water strength; moisture and ozone bearings, bolts and nuts, cleaning chains,
repellent; helps prevent formation of resistance; good thermal, oxidation and precision components and removing
conductive paths; long chemical stability; suitable for use with adhesive labels, etc. The low surface
lasting. Translucent light-gray, heavy- potable water under NSF 61. Heavy tension of the product allows for rapid
consistency, grease-like consistency, translucent white, grease- spreading into for superior removal of soil
silicone paste. like silicone paste. from tight spaces.

Dow Corning 3-6548 RTV Foam
Self-expanding RTV from Dow Corning
providing upto 4 hours fire protection used
as per UL designs. Used for horizontal and
Safer off-shore oil production vertical cable penetrations. When poured,
the material expands to fill up the void
spaces providing a moisture, air, water,
Off the coast of Brazil, sea platforms are at work extracting oil from far below the and fire tight seal. Used for applications
ocean floor. The oil extraction process generates foam, which must be controlled where accidental fire could travel through
for safe operation and efficiency. Silicone antifoams are a popular solution. combustible elements in penetration to
In the past, operators needed to disperse the silicone fluid into a flammable damage critical control equipments.
solvent, introducing risk for the operators handling the solvent in unpredictable
offshore conditions. A new ready-to-use antifoam formulation, delivered at the right
concentration, eliminates use of the flammable solvent and enhances safety for For more log onto www.dowcorning.com
operators involved in the offshore oil production. It also benefits the environment by or mail us at sales@projectsalescorp.com
reducing product waste and disposal or call Satish at +91-98851-49412

Marketed in this region by Project Sales Corp

Project Sales Corp, 28 Founta Plaza, Suryabagh, Visakhapatnam 530020, AP, India
Call 0891 2564393; 6666482, Fax 0891 2590482
www.projectsalescorp.com


EHV Transformer Leak Sealing Kit from Project Sales Corp, India

By Satish Agrawal
Dated: Nov 20, 2011

Project Sales Corp introduces the EHV Transformer Oil Leak Sealing Kit – with QuikSteel From CarGo
Chemical USA

Project Sales Corp has brought in CarGo QuikSteel to India under a marketing arrangement with Blue
Magic USA.

Project Sales Corp now introduces the EHV Transformer Oil Leak Sealing Kit – with QuikSteel From
CarGo Chemical USA

Contains:
10 x 113.6 grams Original CarGo USA QuikSteel Epoxy Putty Stick (260 deg temperature resistance)
2 x 400 ml Cleaner Spray for surface cleaning
1 pack of Absorbent Wipes
3 Pair of Gloves
1 Cutting Blade
1 Spatula for material finishing
1/4 Piece of Styptic Pencil Stick for temporary stoppage of leakage to allow putty application
1 Scocth-brite for surface roughening

Packed in an easy to carry tool kit, the price is kept at INR.4800 per kit plus taxes.

About QUIKSTEEL from Project Sales Corp, India

QUIKSTEEL is a steel fortified, high temperature (500°/260°C) epoxy putty that can be used to make
quick, permanent repairs of all materials except rubber.* It can be used to repair products and parts made of
steel, copper, aluminum, cast iron, stainless steel, galvanized steel, brass, bronze, chrome, silver, gold,
exotic metals, glass, plastic, fiberglass, epoxy fiber materials, PVC, concrete, ceramic, brick, tile and
porcelain. (*QUIKSTEEL will adhere to rubber, but it will not maintain its bond on rubber products that
are constantly flexing).

QUIKSTEEL is certified safe by NSF for use on all drinking water pipes, tanks and systems but can also
be used in many areas such as...

Gas tanks
Intake manifolds
Stripped bolt holes
Mufflers & tail pipes
Radiators
Battery Cases
Mirror mountings
Engine blocks
Gaskets
Plastic grills

Page 1/3


QUIKSTEEL is ideal for repairs to materials, parts and products where conventional heat welding cannot
be accomplished due to the material, location of break, access, or difficulty of disassembling the product or
part. Because it has the consistency of putty and will not run, the repair can be made overhead or in the
vertical plane, as well as the horizontal plane…even inside tanks filled with fluids or chemicals.

QUIKSTEEL will setup under water or in fluids. QUIKSTEEL is impervious to chemicals, solvents, oils,
and acids including battery acids.

No special tools or training is required to successfully used QUIKSTEEL. After QUIKSTEEL is fully
cured (60 minutes), it can be milled, machined, drilled, tapped, shaped, filled, sanded, and painted. You can
do anything to QUIKSTEEL that you can do to metal or wood.

QUIKSTEEL is a proprietary resin compound fortified with steel powder.

QUIKSTEEL:
Will not rust or oxide.
Is impervious to chemicals and corrosion.
Fast curing. Sets in 4 o 5 minutes, is hard like steel in 15 minutes, and fully cured in 60 minutes.
Can be formed and shaped
Will adhere to wet surfaces, underwater, and within chemicals. (Cure time is double when making repairs
underwater or within chemicals.)
Has a minimum three year shelf life prior to mixing. A QUIKSTEEL repair will last forever after it is fully
cured.
Is waste free. The exact amount can be cut or broken off from the master stick for mixing.
Is ideal for making repairs on the road, in remote locations, etc.
Is an ideal emergency repair product for toolbox, car, truck, off-road vehicle, boat, etc.
Can be used as a sealant, adhesive, putty, cement, or to mod, reshape or reform products.

IMPORTANT MIXING INSTRUCTIONS

Mix epoxy putty until it is a consistent gray color free of any black specs (it probably will start to get warm
at this point). Once the putty is warm and the color is consistent, you have about 5 minutes to mold, form,
seal, cement, and otherwise make repairs using QUIKSTEEL starts to set. Once QUIKSTEEL starts to
setup, do not continue to make repairs, as it will not adhere properly.

###

Project Sales Corp has three broad lines of business:

1.Rolling Mill Spares - We represents leading manufacturers of bar and rod mill spares who are original
equipment spares suppliers to mill builders. We handle Daewha Alloytech range for India markets and
introduced the Titanium Carbide Guide Rollers in India in 2004.

2. Turbine Gasketing Products - We import and market turbine sealants - Hylomar, Birkosit, Arexons, etc.
used in turbines, compressors, etc. Our customers inclde BHEL, Siemens, Triveni Turbines, MAN Turbo
India, Kirloskar Ebara, IPPs like Tata Power, JSW, Lanco, Essar, PSUs NTPC, Nuclear Power, and over
100 power stations across India.

3. Offshore Rig Consumables - We market brands like SPC, Brady, Molykote, Dow Corning, 3M,
Kennedy, Gojo, Jetlube, Bestolife, Hilman Rollers, CRC, LPS, Magnaflux, Prinzing, Denso, Uvex, etc

Page 2/3


making us a one-stop source for the specialty consumables used in oil drilling rigs.

www.facebook.com/ProjectSalesCorp

Category Electrical
Tags transformer, leaks, online leakage
Phone 09885149412
Fax 918912590482
Address 28 Founta Plaza, Suryabagh
Visakhapatnam, India
Zip 530020
Country India

* Contact author

Page 3/3

Heat and high
• Easy to work with
pressure-resistant sealing putty

for sealing threads, flanges and
• Heat and high
pressure-resistant faces on high-pressure

equipment, turbine casings,
• Does not dry up
steam lines etc.

Can be used up to a pressure of
• Reliable - safe
16 bar and up to +160 °C.

hochdruck-fermit
Pressure-proof and heat-resistant putty

Non-toxic, pasty putty, heat and high Flanges and faces
presssure-resistant, does not dry up. Coat flanges and faces as well as the
intermediate shim on both sides with
Is particularly suitable for sealing threads, hochdruck-fermit and then screw together firmly.
flanges and faces on high-pressure equipment, The seals produced in this method with
turbine casings, steam lines etc. hochdruck-fermit can be stressed immediately
and the connections can be undone again at
Threads any time.
In order to ensure reliable sealing and
preservation of the hemp the latter must be Temperature range: -20 to +160 °C,
completely impregnated with hochdruck-fermit. briefly also up to +200 °C.

For all threads according to DIN 2999 up to 2 Pressure: maximum 16 bar.
inches in diameter.

Fermit GmbH
Zur Heide 4 • 53560 Vettelschoss www.fermit.de
Tel: +49(0)2645 - 2207 / Fax: +49(0)2645 - 3113

Proactive Industrial Assembly Techniques – Saves your company
time and money and gives you peace of mind !
No one services the Industrial Assembly and Maintenance Markets better than we do ! Our products are
designed to assist you at the time of assembly. Our adhesives and sealants, anti-seize and assembly lubricants are
designed for peak performance in wide temperature ranges, severe weather, and chemical exposure.
No matter you are looking at pipe fittings, gaskets, press-fits of bearings or keyways, nuts and bolts or O rings and Oil
Seals, we can help you improve your equipment reliability, reduce downtime, increase your productivity, and best of all
provide you peace of mind.

Several equipments failures are a result of mechanical assembly failures. Failures can happen through O ring and seal
failures, alignment problems, loosening, leakages, scuffing, scoring, galling, seizing, fretting and more. Some of these
can be easily be avoided by adopting proactive maintenance procedures. Let’s look at a few examples of components
assembled and assemblies that you normally do.

‘O’ ring and oil seals come in contact with When you do press-fits, we recommend There is more to following fasteners cross
media and become brittle and a leak starts. using a press-fit assembly paste2. This tightening sequence in assemblies. If a
This can be easily avoided with the use of avoids scuffing and scoring of the shafts or thread paste is not used, varying torque
rubber assembly lubricants1 that help components being press-fitted and tension can occur in assembly and cause
lubricate and protect rubber components prevents fretting corrosion that cause flange failures. In high temperatures,
and form a protective barrier preventing the seizure. These pastes also allow easy fasteners can seize if a proper anti-seize
rubber from becoming brittle. disassembly after long periods of time. paste3 is not applied.

Pipe Threads can leak due to thread Metal-to-Metal joints can have leakages Contamination induced during an assembly
failures or gaps that can exist after due to asperities on the surfaces. These can cause premature failure of several
tightening. Pipe Thread Sealants4 help in asperities can be filled up using appropriate components including bearings. Preventing
sealing metal and plastic pipes against sealants5 that can handle the required contamination at the time of assembly is
steam, water, gas, etc and avoid leakage. temperature, pressure, media and gap fill easily avoided with the use of appropriate
Non-hardening products are always better. characteristics of the joint. cleaners and degreasers6 and wipes.
Products Referenced in this mailer are some typical example of products available from Project Sales Corp. For a complete range, please drop us a mail or call us on +91-98851-49412
1 Molykote 111 O ring Lubricant 2 Molykote GN+ Paste/ G-Rapid Spray 3 Molykote 1000/ P37
4 Laco Slic-Tite/Pipe-tite Sealants 5 732 RTV, Arexons, Marston, Birkosit, etc 6 ASV Cleaners CS50, CS60, CS35

Explore your options with us.™

Write to us today at 28 Founta Plaza, Suryabagh, Visakhapatnam 530020, AP
or mail us at sales@projectsalescorp.com.
You can fax us at 0891 2590482 or call us on 0891 2564393; 6666482.

Marketed by Project Sales Corp, Visakhapatnam. Email us at sales@projectsalescorp.com

Wire Rope Lubrication
The Physical Characteristics Application Method

•Colour – Black Stir well before use. Apply by
•Grease Base – Lithium Soap brush to previously cleaned
and mineral oil. Base Oil surfaces free from rust, dirt,
viscosity > 300 mm2/s oil, grease, etc. The thumb
•Temperature stability – upto rule for application is 2% of
the wire rope weight should
+ 110 degree C
comprise of the lubricant.
•Dropping Point – 190 deg C
•NLGI Grade – 00
Pricing, Pack Size and
consistency Availability
Presenting Molykote •Stability against water – full
Longterm 00 Grease stability (incl.sea water) The product is available in
for Wire Ropes •Weld Load – 3400 N standard pack size of 30 kgs
and 180 kg drums.
Molykote Longterm 00 is an
exceptionally adhesive semi- Technical Advantages For pricing, please check
fluid grease in NLGI 00 with your local distributors.
consistency for application NLGI 00 semi-fluid
on wire ropes and heavily consistency allows for
loaded open gears. Project Sales Corp
penetration into wire ropes to 28 Founta Plaza
lubricate the core and Suryabagh
strands. Visakhapatnam 530020
The Product
AP
Adhesive, does not get “fling-
The product is a penetrating off” during loading, bending
type grease with exceptional Call +91-891-2564393
and stretching providing Fax +91-891-2590482
adherence, in a ready to use long-term lubrication.
NLGI 00 consistency. sales@projectsalescorp.com
Contains solid lubricants that
The product is soft and provide it very high load
stringy in nature with a very bearing capacity for heavy
high load bearing capacity duty applications.
and excellent corrosion
protection characteristics. It Water washout resistance
is resistant to water washout hence suitable for external
as well as sea water. environments.

In addition to its extreme Is suitable for brushing,
pressure characteristics, the pouring, pouring on a
product contains solid running section of a wire
lubricants that protects the rope, as well by running the
core and individual strands rope through a trough or bath
with a lubricant film even of a lubricant.
under extreme pressures
encountered during bending, Temperature resistance of
stretching and loading on 120 deg C resists run off at
wire ropes. high temperatures.

Technical Advantages Marston Approvals

High Temperature Range of
270-300 deg C compared to Marston Domsel supplies
others for gasketing products to all leading
applications. companies in the field of
aviation, power generation,
Excellent thermal, engine manufacturing, gear
Oil Resistant Non- mechanical and chemical construction, etc.
Hardening Universal resistance.
Jointing Compound for OEM customers of Marston
Turbine Joints Completely resistant to oil, Domsel include Renk, Reinz,
fuels, gases, water, air, anti- Thyssen, Deutz, MAN,
Marston is a unique non- freeze and many others. Massey-Fergusson,
hardening sealing compound Mercedes, Toyota, Shell,
used extensively for sealing Non-hardening – hence Texaco, AEG, Bosch,
metal-to-metal joints at high handles vibrations and lateral Siemens, Varta, Phillips,
temperatures, in the movements better. Caterpillar, Demag, Dynamit
presence of oils, fuels , Nobel, SKF, Perkins, BASF,
lubricants and gases. Seals all asperities in metal- Bayer, Hapag Lloyd and
to-metal joints with one easy many more machine, gear,
The Product application. seals and aircraft
manufacturers
The product is a permanently Unlimited assembly time
plastic, very adhesive sealing after application. Marston’s products are listed
compound based on with NATO and German
polyurethane. Federal Armed Forces, as
The Application Areas
well as many nuclear, gas
Due to its excellent thermal,
mechanical and chemical •Turbine Pedestal Bearing and thermal power stations.
resistance, the sealing Parting planes
compound is especially suited Packaging
for highly stressed joints. •Oil joints in turbines, engines.

•High temperature gear box Available in 80 ml tubes.
The material can handle
temperatures upto 270 deg C flanges
and upto + 300 deg C for short Made in Germany.
time. •Diesel Engines cylinder head
gasket. Original imported packs.
Marston is resistant against Unlimited shelf life.
mineral oils and synthetic oils, •Inlet manifolds, oil sumps,
fuels, additives, gases, water,
anti-freeze, etc. •Thread sealing applications in
drain plugs, etc.
Imported and Marketed by:
Several unique advantages:
•Corrosion protection of threads Project Sales Corp
1. Higher temperature
resistance at 270 deg C 28 Founta Plaza
2. Unlimited shelf life Suryabagh
3. Contains safer acetone as Visakhapatnam 530020
Project Sales Corp. July 2011

solvent
4. Corrosion free – no adverse Call +91-891-2564393
effect on metals Fax +91-891-2590482
5. Better adhesion than other sales@projectsalescorp.com
sealing compounds

Molykote® Applications in Power Plants
– A customer/product reference guide

Molykote® 1000 Thread Paste/Antiseize

All threaded joints and turbine parting plane bolts and studs. Nuts and bolts exposed to
high temperatures and loads. (BSES, Rolls Royce, NFCL, Nalco CPP, NTPC, Ib
Thermal, etc)

Molykote® P37 Ultra pure Antiseize

Gas turbine fasteners exposed to high temperatures. Approved by OEMs including
Siemens, Pratt & Whitney, General Electric, Westinghouse, etc. (HPCL, Emami
Papers, AP Papers, GTPS, BSES, etc)

Molykote® P40 Metal Free Lubricating Paste

Traveling grate furnace area gun metal bush bearings exposed to high loads and
temperatures for continuous lubrication. (Name withheld)

Molykote® GN+ Assembly Paste

Press-fit assembly of bearings, flywheels, keyways for smooth press-fitting and easy
disassembly after long periods. (VSP TPP, JK CPP, Nalco CPP, NTPC, HPCL CPP,
etc)

Molykote® 111 ‘O’ ring Compound

For lubrication of ‘O’ rings in gearboxes, pumps, motors, etc to extend oil seal life and
minimize oil leakages. (HPCL, NTPC, Naval Dockyard Propulsion Generation Dept.,
etc)

Molykote® 321R Anti-friction Coating Spray

Dry lubrication of valve stems in steam areas to prevent emulsification and degradation
of lubricant by contamination, water and steam, and enable easy twisting of the valves.
(JK Papers CPP, BSES Power, Powergrid, etc)

Molykote® Zinc Coating Spray

Cold galvanizing spray for protection of damaged galvanic surfaces, welding and
drilling points, etc (BSES Power, RCL, etc)

Dow Corning® Penelube

For removal of bolts and nuts, bearings, couplings, pivot and guide pins, etc that are
completely crusted and seized with dirt and corrosion. (Nalco CPP, JK Papers CPP,
NTPC Simhadri, etc)
sales@projectsalescorp.com

Dow Corning® 5 Compound

To prevent arcing and flashover on insulators and bushings; and to help prevent rust
and corrosion on insulator threads and bolts. (NTPC, Rain Calcining Limited,
APTRANSCO)

Silastic® 732 RTV Silicone Sealant

Form-in-place gasketing for pumps, motors and gearboxes. (NFCL CPP, Nalco CPP,
NTPC, JK Papers CPP, VSP TPP, HPCL CPP, RCL, etc)

For bonding of ceramic tiles in ball mills (KTPS, VTPS)

Molykote® MKLn Chain Spray

Lubrication of chains in ash handling plant for dry lubrication and prevent early
damage to chains due to abrasive contamination particles. (Nalco CPP, AP Paper Mills
CPP, etc)

Molykote® Metal Protector Spray

Long-term storage protection of bearings, precision components and tools (NTPC
Simhadri, Indian Navy Propulsion Generations Department)

Molykote® P 74 Metal Free Anti-seize Spray

Turbine trunion support and burner tilting mechanism, press-fit of blades. (Andhra
Sugars, GTPS)

Molykote® 44 Silicone Grease

Main oil tank pump seal, dry ash handling valve and gland, BB coupling between
generator and exciter gear box (NTPC, Talcher)

Molykote® Longterm 00 Semi-FluidWire Rope Grease

Long-term lubrication for heavily loaded wire ropes and open gears (BSES Power)


Knife-type electric disconnect switches, oxidation resistant grease (GTPS, BSES Power, NTPC Talcher etc)


Lip seal coating on bowl hub assembly in pulveriser mill (NTPC)

The above list compiled is for reference only. Please check product data sheet for suitability of product
with your application or call 98851 49412 for technical assistance. Molykote® is a registered trademark of
Dow Corning Corporation and distributed in this region by Project Sales Corp, 28 Founta Plaza,
Suryabagh, Visakhapatnam 530020, Call 0891 2564393, 66482; Fax 0891 2590482.


Molykote Greases

Longterm 2+ Grease for Molykote P40 Grease Paste
Longterm 00 Grease heavy and shock loads for extremely corrosive
for Wire Ropes applications environments

Molykote Long-term 2+ is an extreme
Molykote Longterm 00 is an Molykote P40 Grease Paste is a metal
pressure grease designed for the
exceptionally adhesive semi- highest bearing loads and long-term free assembly and lubricating paste
fluid grease in NLGI 00 lubrication, with a unique blend of high with an evaporation-stable carrier oil
consistency for application on viscosity base oils, extreme pressure and high-temperature stable solid
wire ropes in the marine additives, Mos2 and other solid lubricants for components exposed to
extremes of temperature and corrosive
industry and offshore. lubricants.
influences.

Properties:
Properties: Properties:
Extreme pressure solid lubricant
Excellent Corrosion Protection Low toxicity, low water pollution
grease for heavy and shock loads
Characteristics class
resistance
Highly Adhesives, does not get Highly adhesive, water resistant
Lithium soap, solids, adhesion
fling off and contains over 25% solids for
improvers and corrosion inhibitors
extreme pressure lubrication
with excellent water resistance
Sea Water Resistant
Provides longer term lubrication Not suitable for high speed
Contains solid lubricants for compared to conventional greases bearings, designed for high loads
extreme pressure lubrication for low speeds
heavily loaded wire ropes Pumpable in grease guns and
centralised systems Multifunctional product, properties
Can be brushed, poured or bath of a paste for hinges, joints,
lubricated Resistance to fling-off in shock threaded connections, open gears,
loads pivots, pins, etc

Pack Size: 30 Kgs Pack Size: 30 Kgs Pack Size: 1 kgs

Application Areas:

Crane wheel bearings, support
roller bearings, joints, hinges,
forklifts, deployment mechanisms,
sprockets, pulley plummer blocks
and any heavy or shock load
applications.

MULTI-TAPE (upto 46 kv)

MULTI-TAPE is a self-sealing tape
made of PIB (polyisobutylene) and
caoutchouc. Seals instantly under
tension to form an air-
free homogeneous insulation without
applying heat or pressure. MULTI-
TAPE is non-adhesive, easy to use,
and when cut open, can be easily
removed without leaving any residues.
To insulate and impregnate electrical
components. Protects metal tubes
and pipes from corrosion.

MULTI-TAPE AREAS OF
APPLICATION

Used for joining, splicing and repairing
a large range of high-voltage and
distribution cables up to 46 kV. It can
also be used for the insulation and
impregnation of electrical
components, and to cover metal tubes
and pipes against corrosion. With
Marston Domsel Multi-tape, even
power cables carrying up to 46
kV can be insulated with ease.

Roll 5 metre Each . Product of Marston
Domsel GmbH

Marketed in India by:
Project Sales Corp, 28 Founta Plaza,
Suryabagh, Visakhapatnam 530020, India
Fax 91-891-2590482

Boilers, furnaces, ovens and more….introducing shortly a
complete range of new sealing compounds in India…

High Pressure Hochdruck Fermit
Non-toxic sealing filler, resistant to heat and high pressure, non-
drying. For sealing of threads, flanges and surfaces of high pressure
plants, turbine casings, etc. Temperature upto 160 deg, Pressure 16
bar. Most suitable as a Generator End Shield Sealant (eqv. to Tite-
Seal)

Refractory Boiler Putty FROSCHMARKE
Froschmarke refractory boiler putty is a potassium water glass-
based sealing putty. Froschmarke refractory boiler putty is
guaranteed to be resistant to open flames and temperatures of
up to above +1000 °C. Has good adhesion, is non-shrinking,
completely seals off smoke and gas. For boilers, furnaces and
stoves.

Schamottkleber HT 1100 (REFRACTORY GLUE HT 1100)
Its formulation of alkali silicate and mineral fillers makes it a heavy-duty glue at temperatures of up
to 1100°C.

Uses include:
- Fastening of thick string, glass fibre or ceramic fibre tresses.
- Fastening of fireclay materials to metal parts exposed to intense heat.
- Gluing of jacket tubes, sleeves and other fireclay parts - designed to adhere insulating
board
- Setting of fireclay bricks in stoves and heating units

Fermitol - Liquid synthetic resin sealant
Universal sealing compound and glue, resistant to oil, liquefied petroleum gas, petrol,
benzene, paraffin/kerosene, greases, water, steam, acid, alkaline solution, brine,
seawater etc., once set also resistant to spirit and all fuel mixtures. For the sealing of
threads, flanges and faces on petrol, oil, grease and water lines, oil heating units and
propane gas units, engines, engine casings, gearboxes, cylinder heads, crank cases,
machines, process equipment and tanks

3-D Filler Liquid Sealant for Small Leaks
3-D-sealant closes pores, cracks or damage to gaskets and seals on heating boilers,
radiators, pumps, cylinder blocks and car radiators from the inside so that they are
absolutely water and steam pressure-tight.
Input quantity: 1 kg of 3-D-sealant for 150 l of heating water

Grafitpaste Nivo - sealing paste for threaded and flanged
joints
Prevents the sticking of gaskets, bolts, screws etc. which are exposed to
intense heat. In the case of flange gaskets and surface seals, coat both
sides with the paste.

For technical and material safety data sheets, please contact Satish Agrawal at +91-98851-49412 or mail to satish@projectsalescorp.com


of 1

Swetha S Bidi, Project Sales Corp

From: "Offshore Markets, Project Sales Corp" <offshore@projectsalescorp.com>
Date: 03 April 2010 12:53
To: <sales@projectsalescorp.com>
Subject: Marine Metal & Fibreglass Polish

DEVELOPED FOR PROFESSIONALS

Demanded by those who have tried it

4-IN-ONE ACTION - Cleans, polishes, restores, and protects 38 surfaces... brass, copper, stainless
steel, silver, gold, chrome, fibreglass, ceramics, glass, acrylics, painted surfaces and much more.

BEST VALUE FOR MONEY - The easiest and most economical product to use... No spills, residue,
odour, cloth saturation or mess.

USED ON COUNTLESS ITEMS - The most universal product available... Use on silverware, bar taps,
faucets, chandeliers, counter tops, sinks, mirrors, porcelain, and much more.

LONG-LASTING INGREDIENTS - Removes oxidation, heat discoloration, corrosion, scale... Leaves
an anti-oxidant protective barrier.

Available with lead time of 2 weeks @

INR. 440.00 per 50g tube
INR.750.00 per 100g tube
INR.2750.00 per 1 ltr tin

VAT extra @ 14.5%

Regards
Satish Agrawal

05-06-2010

It’s so simple to use, you will feel this is exactly the repair
material you have been looking for !

Unique Features of QuikSteel Part # 6004 from CarGo Blue Magic USA:

 No special tools or training required, just knead and apply
 Temperature Resistance 260 deg C
 Shear Strength 740 psi
 Tensile Strength 6200 psi
 Shore Hardness D-87
 Works Underwater and seals leaks online
 NSF Certified
 Works on all metals including cast iron, aluminium, stainless steel, copper, brass
and on plastics, glass, ceramic, concrete and fiberglass too
 Shelf life 3 years from opening
 Sets in 15 minutes, full cure in one hour
 Resistant to all fluids including coolants, oils, petrol, diesel, solvents, alkalis and
most chemicals including battery acids

4 oz (113.6 grams) I Rs.400 Ea I Taxes Extra I Box of 12 I Immediate Deliveries I
Call Project Sales Corp on +91-891-2564393 mail: sales@projectsalescorp.com

QuikSteel is imported and marketed by Project Sales Corp, Visakhapatnam under an arrangement with CarGo Chemical Company. For product MSDS please visit
www.bluemagicusa.com. Data given are correct to the best of our knowledge. For tips and use instructions and get updates see us at www.facebook.com/QuikSteel

Suggested Uses for
QuikSteel Epoxy Putty Sticks
Building Maintenance Industrial
• Repair leaks in skylights, chimneys and roofs • Anchor machines and equipment; attach machine tags
• Seal seams and leaks in aluminum gutters and flashing • Plug leaks in drums, oil and water tanks
• Repair door molding, aluminum storm doors, outside • Thread-lock compound for pipes and fasteners
railings, gates and ironwork • Model-making medium
• Seal tie rod holes • Can be used as a filleting compound
• Patch plasterboard; repaint in minutes • Form nuts and bolts, cams and tool handles
• Restore concrete floors, cinder block walls, • Fill rough-weld seams before painting
brickwork, curbs and steps • Form drilling jigs for odd-shaped work pieces
• Plug basement wall cracks; seal leaks and small holes
in foundations and outer walls HVAC
• Adhere loose tiles; attach fixtures, signs, etc. • Insulate and fill holes; stop drafts
* Not intended for structural applications. • Plug holes, seal seams in equipment and ducts
• Stop vibrating sheet metal, hoses and tubing
Electrical • Repair air conditioning coils
• Hold wires in place
• Isolate and insulate multiple connections Marine & Underwater
• Mend broken switches, actuators and electrical plugs • Mount and level compasses
• Water and vapor-tight seals for cable fittings and • Patch dings, scratches, cuts and gouges in fiberglass,
electrical connectors metal and wooden surfboards and boats
*Turn off power before doing electrical repairs • Seal a row boat seam; emergency and routine
repairs to boat decks and hulls
Plumbing • Replace rotted wood
QuikSteel is NSF Certified for use • Repair fish boxes
in contact with potable water under Standard 61 Drinking Water • Coral propagation
Systems Components—Health Effects.
• Stop fraying rope ends
• Mend damaged or leaking water pipes, elbows and • Repair hot tubs, spas; patch holes, cracks and leaks
joints; fix freeze breaks and hot water lines in swimming pools and pool skimmers
• Seal leaking bath fixtures and sink traps
• Mend leaking water heaters, water tanks, etc. Woodworking
• Seal leaks in PVC % ABS pipe; connect metal to • Repair rotted wood; fill insect damage; fill knot and
plastic pipe nail holes (will not bleed)
• Repair broken drain tile • Fill gaps in wood caused by shrinkage or measuring
error; fill cracks, scratches, dents and gouges

Suggested Uses for Specialty Epoxy
Putty Sticks continued ...

Woodworking continued ... Recreational/Hobby/Craft
• Rebuild stripped screw holes • Model-making medium; create raised relief maps
• Form and restore special shapes in wood trim • Add customizing detail to model train set-ups, "action
and molding, picture frames, handles, knobs, etc. heroes", plastic model kits, wooden ship models, etc.
• Level furniture and table legs; repair loose • Reshape carvings
chair rungs • Fix broken pottery and ceramics; repair cracks in
• Hold wood to wood and wood to metal concrete bird baths and garden statuary
• Mend leaking watering cans, wheelbarrows and
Automotive flower pots
• Fill holes and dents in auto or truck bodies, • Jewelry and eyeglass repairs
motorcycles, RV's and lawn mowers • Fix cracked doll body parts and mold parts
• Fix leaking radiators and form custom gaskets; replacements
rebuild small engine parts • Reattach a golf club head to the shaft
• Patch mufflers; emergency gasoline tank repair • Camping equipment repairs (coolers, mess kits,
• Repair cracked battery case fishing rods, etc.)
• Restore torn sheet metal; reattach trim, • Taxidermy fixuring and forming parts; mold duck
mirrors, etc.; attach dashboard compass decoy parts; restore dinosaur bones
• Form replacement knob for air conditioner • Fill in a cracked horse's hoof
controls and other knobs

Around the House NON-WARRANTY: ALL RECOMMENDATIONS, STATEMENTS AND
• Repair tools and equipment TECHNICAL DATA CONTAINED HEREIN ARE BASED ON TESTS WE BELIEVE
TO BE RELIABLE AND CORRECT, BUT ACCURACY AND COMPLETENESS OF
• Repair bicycle fenders, frames and sprockets SAID TESTS ARE NOT GUARANTEED AND ARE NOT TO BE CONSTRUEDAS A
WARRANTY, EITHER EXPRESS OR IMPLIED. USER SHALL REPLY ON HIS
• Form insulated handles for tools, pots and pans OWN INFORMATION AND TESTS TO DETERMINE SUTABILITY OF THE
PRODUCT FOR THE INTENDED USE, AND USER ASSUMES ALL RISK AND
• Mold replacement knobs for stove or oven and LIABILITY RESULTING FROM THIS USE OF THE PRODUCT.
pulls for furniture and cabinets MANUFACTURER'S SOLE RESPONSIBILITY SHALL BE TO REPLACE THAT
PORTION OF THE PRODUCT OF THE MANUFACTURER THAT PROVES TO BE
• Mold a curtain rod ferule, then stain; form a DEFECTIVE. MANUFACTURER SHALL NOT BE LIABLE TO THE BUYER OR
ANY THIRD PARTY FOR INJURY, LOSS OR DAMAGE DIRECTLY OR
bracket to reattach home alarm sensor to door INDIRECTLY RESULTING FROM USE OF, OR INABILITY TO USE, THE
PRODUCT. RECOMMENDATIONS OR STATEMENTS OTHER THAN THOSE
• Mend cracks and dings in toilets, sinks, tubs, CONTAINED IN A WRITTEN AGREEMENT SIGNED BY AN OFFICER OF THE
kitchen counters and appliances MANUFACTURER SHALL NOT BE BINDING UPON THE MANUFACTURER.

• Patch small drywall area in the shower
• Mount or attach fixtures, signs, pictures and
smoke alarms; reset ceramic and quarry tile;
reattach handle to glass coffee pot
• Luggage repairs
• Repair outside furniture
• Mold replacement parts for plastic toys
• Restore torn tapping screw holes and worn out
threads (can be tapped)
• Mend leaks in buckets and water tanks
• Reattach the heel of a shoe
• Reattach a broken fence post

Project Sales Corp, 28 Founta Plaza, Suryabagh, Visakhapatnam 530020

QUIKSTEEL EPOXY PUTTY
Technical Data
PART NUMBERS: 6004 - Size 4 oz (113.6 grams stick), Box of 12 pieces of 4oz

FAST DRYING: QUIKSTEEL firmly sets in 15 minutes, and is completely cured and ready to drill,
sand, tap, prime, machine and paint in one hour (longer in colder conditions).

STRONG: There are two ways strength is measured. One is on the horizontal plan – this is called
"shear strength" and the other is on the vertical plane and this is called "tensile strength."

SHEAR STRENGTH – When cured (one-hour drying time) QUIKSTEEL has a shear strength of 740
pounds per square inch. This means that when two pieces of material are bonded together with a
one-inch bond of QUIKSTEEL, it would take a pressure greater than 740 pounds to break the bond.
For comparison, pine timber has a ‘shear strength’ of 400 pounds per square inch. QUIKSTEEL is
almost twice as strong as pine timber.

TENSILE STRENGTH – QUIKSTEEL has a tensile strength of 6,200 pounds per square inch.

HARD: QUIKSTEEL is one of the hardest materials next to steel. Technically it is rated at D-87. "D" is
the highest hardness rating in the Shore rating system. QUIKSTEEL can be compared to ABS plastic
(material used to manufacturer automobiles) or the fibre epoxy wings on the B2 bomber. When cured,
QUIKSTEEL can be machined in any way that steel or aluminium can be machined, drilled, tapped,
milled, sanded, sawed, routed, primed, and painted. Anything you can do to metal or wood – you can
do to QUIKSTEEL.

SEALS LEAKS UNDER WATER OR IN FLUIDS: QUIKSTEEL cures underwater and in all
atmospheric conditions. Leaks can be sealed inside a container, tank, etc. with liquids still in the item
to be sealed. Curing time is longer when used under water.

SEALS LEAKS WHILE LEAK IS OCCURING: If a petrol or diesel tank, oil pan, or any container has
a rupture, QUIKSTEEL will seal the leak while the drainage is occurring. No need to empty container
prior to repair.

IMPERVIOUS TO CHEMICALS: QUIKSTEEL is impervious to most chemicals including battery
acids.

STEEL REINFORCED: QUIKSTEEL has the maximum holding power because it is steel reinforced,
and manufactured using the highest grades of epoxy.

WITHSTANDS TEMPERATURES OF 260 DEGREES CELSIUS OR MORE: QUIKSTEEL maintains
its qualities when exposed to temperatures in excess of 260 degrees Celsius. (+500oF)

LONG STORAGE LIFE: QUIKSTEEL has a minimum storage life of three years. This provides the
user long storage life. QUIKSTEEL’S proprietary formula is the only brand that remains pliable before
use. This insures easy mixing even after long periods of storage. DOES NOT CRACK OR FLAKE
BEFORE USE.

IDEAL FOR REPAIR OF: Petrol and diesel fuel tanks, water tanks, swimming pool equipment,
exhaust systems, boats, automobiles, trucks, plumbing, farm machinery, home, camping equipment,
and hundreds of other applications.

QUIKSTEEL has world - wide approval to use with potable water (ANSI/NSF 61). NSF certifies all
QUIKSTEEL brand epoxy putty products safe for the repair of drinking water pipes, holding tanks and
dispensing components.

Call +91-891-2564393 Fax +91-891-2590482 mailto: sales@projectsalescorp.com

• Gasketing Compounds
• Jointing Compounds
• Flange Sealants
• Thread Sealants
• Pipe Sealants
• Form-in-place RTVs
• Turbine Flange Sealing
Compounds

Aresons Motorsil D QUIKSTEEL EPOXY STICK
(High Temp. Oil Resistant Sealant) An easy to use high temperature epoxy
A Nuovo Pignone Recommended Product stick sealant for online sealing of leaks in
When you have a gasketing application that petrol, diesel, solvents, alkalis tanks and
requires (a) thickness (b) oil resistance (c) high transformers. Cures in 60 minutes and
temperature resistance, you choose Arexons has a temperature resistance of 260 deg
Motorsil D. 60 gms tube from Arexons SpA, C, shear strength of 740 psi, Tensile
Italy. strength of 6200 psi and shore hardness
of D-87. 113.6 grams stick, Rs.399 Ea

Birkosit Dichtungskitt Marston Red High Temperature Gasket &
(Temp Resistance 900 deg C and Jointing Compound from Marston Domsel
pressure resistance 250 bar,
Developed in co-operation with Siemens)
For any sealing application in turbines, compressors,
engines, generators, expanders, flanges, etc where
the highest temperature and pressure resistance is
required. Approved by BHEL, Siemens, Triveni, MAN
Turbo, Ebara and most OEs, Birkosit gives a service
life of 10 years, has a shelf life of 5 years, contains A unique non-hardening gasketing compound for
linseed oil for better sealing properties, and is sealing metal-to-metal joints in the presence of oils.
available in imported 1 kg packs from Germany. Used for pedestal bearings flanges in turbines, gear
box casings, pumps, motors, and various finely
Refractory Boiler Putty FROSCHMARKE machined flange sealing applications. Rs.199 Ea
Froschmarke refractory boiler putty is a potassium water glass-
based sealing putty. Froschmarke refractory boiler putty is Non-toxic, non-drying
guaranteed to be resistant to open flames and temperatures of formula will not harden
up to above +1000 °C. Has good adhesion, is non-shrinking, or crack in the pipe joint.
completely seals off smoke and gas. For boilers, furnaces and Provides easy
stoves. disassembly and break
Laco Pipe Thread Sealant, Pipetite out. Seals to high
Use on metal threads for sealing steam, water, pressures: 10,000 PSI
air, natural gas, LPG. 1-1/4 oz stick. Temp for Liquids, 3,000 PSI for
resistance 177 deg, Pressure 136 bar for liquids, Gases. Sealing
24 bar for gas. Plasto-joint for Plastic fittings Slic-tite® Paste with PTFE temperature range: -50˚
to 500˚F (-46˚C to
260˚C). Recommended
Marston High Temperature RTV Sealant
Services: water, natural
Hylosil RTV Silicone Sealant from Germany, 80 ml
gas, LP gases, steam,
tubes for form-in-place gasketing at high temperatures
air, gasoline, kerosene,
upto 300 deg C.
Refrigerants, ammonia,
Hylo/MD Surface Cleaner Spray caustics, and acids. ¼
A surface cleaner spray from Marston Domsel to be used prior to all pint and ½ pint packs.
sealing and bonding application to clean surfaces for better bonding. 236 ml Rs.750 Ea
Helps improve adhesion when sealing materials applied to clean
surfaces. Very fast evaporating, cleaner/degreaser removes dust, dirt, PTFE Cord 3/32” x 50’
oil, grease, etc from components. Available in 400 ml spray, 125 ml PTFE cord used as packing for valves,
bottles. Imported from Marston-Domsel Germany. Rs.250 Ea pumps, flanges as a gasket material.
Resistant to all chemicals, solvents,
Also available from Project Sales Corp, a complete range of anaerobic fuels and acids, and temperature
adhesives and sealants, weather-sealing sealants, fire retardant expanding resistant to 260 deg C, this non-
foam sealants, clean-room sealant, Pipe Jointing Compounds, 3M/Marston flammable, non-hazardous PTFE cord
Domsel Polyurethane sealants, MS Polymer Sealants, Thread Pastes, ASV replaces all other sealants and tape
Aerosols, etc that makes us a one-stop source for all your sealing needs. on threads. Imported from LACO,
Explore your options with us ! USA. Rs.1250 Ea

Marketed by Project Sales Corp, Visakhapatnam. Email us at sales@projectsalescorp.com
©TM All brands, images and registered trademarks are the property of their respective owners. Users are requested to check the suitability of the product to their application. For further details,
please feel free to write to us at satish@projectsalescorp.com or log onto www.projectsalescorp.com or respective brand web site sites.

Proven Every Day // Proven Everywhere ®
Slic-tite® Paste with PTFE
Premium Thread Sealant
FEATURES:
• Slic-tite® contains more PTFE than other national brands. The higher concentration of
PTFE particles provides greater sealing power on all tapered pipe threads including
those that are damaged.
• Brushes easily on wet or oily threads.
• Sticks to hot, oily threads, will not run oﬀ. Ideal for use on production lines using high
speed pipe threading machines.
• The non-toxic, non-drying formula will not harden or crack in the pipe joint. Provides
easy disassembly and break out.
• Seals to high pressures: 10,000 PSI for Liquids, 3,000 PSI for Gases.
• Sealing temperature range: -50˚ to 500˚F (-46˚C to 260˚C).
• Meets Fed. Spec. TT-S-1732
• Slic-tite contains a product made from PTFE and other PTFE resins to assure high
performance.
TYPICAL APPLICATIONS:
• Slic-tite seals all types of pipe threads: steel, stainless steel, brass, aluminum, iron, and
PVC, CPVC and ABS plastic.
• Recommended Services: water, natural gas, LP gases, steam, air, gasoline, kerosene,
Refrigerants, ammonia, caustics, and acids. Contact factory for speciﬁc use
recommendations. NOT RECOMMENDED FOR USE WITH OXYGEN SERVICE.
USDA approved for use in federally inspected
Use OXY-TITE®.
meat and poultry plants.

FGG/BM®, FlowGuard Gold®, BlazeMaster® and Corzan® are
registered trademarks of The Lubrizol Corporation.

RECOMMENDED
INDUSTRIES:
• Plumbing
• AC/R
• Industrial Piping
• Chemical Processing
Plants
• Manufacturing Plants
• Gas Utilities
• Fire Sprinkler Piping
• Irrigation Systems

ORDERING INFORMATION
Part No. Size QTY/Case Part No. Size QTY/Case
41209 1/4 pt. BIC 12 42013 1 qt. Flat Top 12
42009 1/4 pt. BIC 24 42049 1 qt. BIC 12
41219 1/2 pt. BIC 12 42014 1 gal. 4
42019 1/2 pt. BIC 24 42015 5 gal. 1
42012 1 pt. Flat Top 24 42069 55 gal. 1
42029 1 pt. BIC 24
BIC = Brush in Cap
LP97R00010 • CG 10/08 5M • LA-CO Industries, Inc. • Printed in U.S.A.

International references of Molykote® applications
Molykote® 111 Silicone Compound

Downhole wireline probe - used to seal and lubricate in the presence of water and
corrosive attack. (Schlumberger & Gearhart)
Value lubrication on mud logging analysis equipment (Core Labs Ltd.)
Fire equipment water valves.(Woodweir Fire Protection)
Diving equipment as water resisting lubricant.
Oil refinery valves & instruments bearings. (British Petroleum)
Valve Lubricant (Shell, British Gas)
Lubricate swivel bearings (Scott Lithgow)

Molykote® 44 Medium

Gas turbine bearings.(Shell, BP)
Bearings on fire fighting equipment.
Tanker loading arms.(British Petroleum)

Molykote® 55 M

`O’ ring & seal lubricant on gas process plant.(Shell)

Molykote® 33 Medium

Used as packing to resist water & chemicals on subsea yest tree (a type of blowout preventor) (Expro)
Low temperature bearing lubricant on gas process plant (British Gas)
Bearing and swivel lubricant on submersibles (Bue Subsea/BP)

Molykote® FS 1292

Gas plant equipment subjected to corrosive attack and high temperatures. (St.Fergus Gas
Terminal)
Protection of Joint Seal (Occidental)

Molykote® 3451

Chicksan joints on tanker loading arms (Occidental)
Acid Pump Glands (British Petroleum)

Molykote® BR2+

Drive motors and pumps on submersible craft (Bue Subsea)

Molykote® Longterm 2+

Wireline equipment bearing lubrication
Lubrication of valve actuator mechanism (Keystone)


Molykote® 321R

Refinery centrifuging bolts (British Petroleum)
Dry lubrication of scientific equipments
Anti-galling coating on wire line probes and downhole tools threaded end connections (Gearhart & Christionn Diamond)
Anti-galling on valve stems

Molykote® 3402C

Downhole tools as anti-galling coating
Jack screws on off-shore oil rigs from salt water corrosion (Friede and Goldman)

Molykote® 3400A

Anti-galling corrosion resistant coating on ball valves (Cameron)

Molykote® 106 Bonded Lubricant

Approved by ACF WKM Valves and Gray Tool on valve stems and Christmas tree fittings.

Molykote® G Rapid +

Anti-galling medium for downhole tools and drill collars.
Assembly aid for pump, compressors and valve refurbishment.

Molykote® 1000 Thread Paste

Extensively used on a wide variety of components as an anti-seize thread paste (Howard Doris)

Molykote® Supergliss

General maintenance disassembly lubricant (Chevron, BP, etc)

Molykote Metal Protector

Corrosion protector for stored components (Cameron, ACF)

Molykote® Cu 7439

Used as an underwater shackle lubricant
Water resistant anti-seize for threaded connections

Molykote® Zinc Spray Coating

Anti-corrosive primer paint for refurbishing of pumps and valves for offshore applications.
Welding protection of pipes, sheet metal fabrications and weld refiner.

Molykote® Separator Spray

Contact medium between probe and surface on ultrasonic testing equipment
Water repelling film on electrical equipment

Molykote® 3694 Open Gear Lubricant

Wire rope and open gear lubricant (Lloyd Testing)

Molykote® 165 LT

Lubrication of rack and pinion on hydraulically operated cranes (Atlas)

Molykote® is a registered trademark of Dow Corning Corporation. Molykote® extends equipment life, simplifies yours.
When you need to be absolutely sure, trust Molykote®. Call Project Sales Corp, 28 Founta Plaza, Suryabagh,
Visakhapatnam 530020, AP. at 0891 2564393, 5566482 or fax us on 0891 2590482.
mailto:satish@projectsalescorp.com

Choose from :

Kong Original: KONG Oil & Gas Original Glove designed by Oil & Gas
Industry experts to reduce/ if not eliminate the THREE biggest hand injuries!
Hairline Fractures; Bruising Blows and Pinched Fingers; Sold over 500,000
pairs worldwide. Kong got Ironclad an Offshore Leadership Award for
exceptional performance in enhancing worker hand safety through the
development of Ironclad's KONG(TM) line of gloves for the oil & gas
industry. KONG(R) Waterproof was the recipient of Occupational Health &
Safety Magazine's 2010 New Product of the Year Award for Hand Safety.
Available in S, M, L, XL, XXL size.

Kong SD Gloves : KONG® Super Dexterity (SD) glove, an expansion of the
KONG® Original line of technical performance gloves for the oil & gas
industry. The KONG® SD is a task-specific performance work glove for
workers who build and maintain oil and gas rigs, platforms and facilities. The
KONG SD combines the impact protection features of the award-winning
KONG® Original with patented cross-over technologies from other Ironclad
glove models, such as the Box Handler® and Gripworx® gloves. The KONG
SD features a silicone-fused grip palm which greatly enhances dexterity and
grip. KONG® SD glove is positioned at the rig construction workplace, with
technology specifically designed for this uniquely hostile environment.
Available in L Size only.

Ringers Roughneck : CE Certified Level 2 Puncture and Cut Resistant, full
covered palm with Tefloc to resist oil and improve grip, TPR impact
protection on top of hand and full length of fingers; high visibility for
improved safety; extended neoprene wrist closure; what else could you ask
for in a special glove that is designed for most superior protection for the
most rigorous environments. Available in XL, XXL size.

Ringers Authentic Mechanic: Designed by mechanics for mechanics, the
authentic mechanic gloves from Ringers, USA. Unique features like its snug
fit; hidden seal design; tough spandex top material outlasting all; premium
synthetic leather for palm and fingers, make it a true superstar performer
where dexterity is what you want. Available in L, XL and XXL size.

Imported and Marketed by:

Project Sales Corp I 28 Founta Plaza, Suryabagh I Visakhapatnam
530020 I Call +91-98851-49412

Eliminate Waste with a spill kit configured to your requirements !

Universal Spill Kit 85 Gallons Oil Only Spill Kit – Absorbency Oil Only + Chemicals Spill Kit
Absorbency, All Chemicals – 55 gallons, – Dredging Absorbency 95 gallons, – Aker
Reliance Industries, Nagothane International, Kakinada Solutions, Kakinada

Hazmat Spill Kit 85 Gallons Oil Only Spill Kit 70 Gallons Hazmat Spill Kit 10 Gallons
Absorbency, All Chemicals - RIL Absorbency, Indiana Traders, Absorbency for OFS Operations-
Onshore Terminal, Gadimoga Mumbai Schlumberger Asia Services

Spill Kit Oil Only 55 Gallons Spill Kit Oil Only 15 Gallons
Spill Kit Oil Only 55 Gallons
Absorbency Even Enterprises, Absorbency – TM
Absorbency, Essar Oilfield Services,
Chennai Mohammedally, Mumbai
Kakinada

BIRKOSIT Dichtungskitt® withstands hot steam and air at temperatures of up to 900 °C. Apply the BIRKOSIT
Dichtungskitt® to flange surfaces with a brush or putty knife during assembly. The layer thickness to be applied is
0.2 mm to 0.3 mm for metal to metal joints and in a light coating when applied as a gasket dressing. The product
can be subjected to workloads immediately!

Engineer’s
Blue (Prussian
Blue) – Stuarts
Micrometer
Stuarts Micrometer -
Engineers Marking
Blue gives a clear
perfect mark on any
metal, in any light,
and being a lubricant
cannot damage
bearings or other
working parts.

The product is an intensely blue, soft, uniform paste that spreads easily and evenly to
show high spots on bearings. It is most valuable when used on flat bearing surfaces of
lathes, planers, milling machines, etc. A thin coating may be left on the surface day in
and day out, and will not dry. The film remains “wet” and “transferable” and in condition
for months. No nightly clean up or morning re-bluing is necessary.
Aids precision fitting of machined surfaces. Makes improper fitting high spots
immediately visible as bright blue streaks.
Locates high spots on bearings, valves, gears and other close-to-tolerance
components.

Available in 38 gms tins @Rs.550.00 Ea
Ex-stock supplies.
APVAT 14.5% or CST 2% as applicable extra.
Dispatch through First Flight Courier across India locations.

Imported and Marketed by Project Sales Corp, India
Project Sales Corp, 28 Founta Plaza, Suryabagh, Visakhapatnam 530020, AP, India
Call 0891 6666482, 2564393 Fax 0891 2590482


The most complete range of Molykote products in India from Project Sales Corp

By Satish Agrawal
Dated: Nov 13, 2011

Project Sales Corporation, Visakhapatnam is India's largest distributors for Molykote products having sold
over US$2 million of Specialty Lubricants in this region since 2000.

No matter how harsh the environment or how extreme the temperature, you’re sure to find a Molykote®
brand lubricant worthy of the challenge. When you specify maintenance products from Dow Corning,
you’re specifying the results of more than 60 years of innovations by a world leader in lubrication
technology. With dedicated global research and development operations, Molykote brand lubricants from
Dow Corning bring you the best in assembly and maintenance technology from around the world. Our
knowledgeable sales professionals will help you choose the right lubricating product for your unique
maintenance needs.

Now get Molykote products from India'a leading distributor for Molykote products - Project Sales
Corporation.

See what's in our range:

DOW CORNING® 3099 HVIC COMPOUND - Dow Corning 3099 is a grease-like silicone coating
especially formulated to give electrical insulators long-term resistance.

DOW CORNING® 5 COMPOUND
Silicone-based silicone, dielectric compound used on insulators and bushings

MOLYKOTE® 1122 CHAIN AND OPEN GEAR GREASE
Chain and open gear lubricant

MOLYKOTE® 1292 LONG LIFE BEARING GREASE
Fluorosilicone grease with polyurea thickener.

MOLYKOTE® 33 EXTREME LOW TEMP. BEARING GREASE, LIGHT
Phenyl-methyl silicone grease for extreme low temperatures

MOLYKOTE® 33 EXTREME LOW TEMP. BEARING GREASE, MEDIUM
Phenyl-methyl silicone grease for extreme low temperatures

MOLYKOTE® 3451 CHEMICAL RESISTANT BEARING GREASE
Fluorosilicone grease thickened with PTFE

MOLYKOTE® 3452 CHEMICAL RESISTANT VALVE GREASE
Fluorosilicone grease thickened with PTFE

MOLYKOTE® 41 EXTREME HIGH TEMP. BEARING GREASE
Phenyl-methyl silicone grease thickened with carbon black

MOLYKOTE® 44 HIGH TEMP. BEARING GREASE, LIGHT
Phenyl-methyl silicone grease for low to high temperatures

Page 1/5


MOLYKOTE® 44 HIGH TEMP. BEARING GREASE, MEDIUM
Phenyl-methyl silicone grease for low to high temperatures

MOLYKOTE® 55 O-RING LUBRICANT
Phenyl-methyl silicone grease formulated for O-rings

MOLYKOTE® 6173 GREASE
Synthetic (PAO) grease especially for plastics

MOLYKOTE® 7325 GREASE
Silicone grease especially for overrunning clutches in starter motors

DOW CORNING® 111 VALVE LUBRICANT & SEALANT
Silicone-based compound, heavy consistency

DOW CORNING® C-40 HIGH TEMP CHAIN LUBRICANT
Lubricant for bearings and chains exposed to high temperatures

DOW CORNING® M GEAR OIL ADDITIVE
Moly-fortified motor oil additive

MOLYKOTE® 321 DRY FILM LUBRICANT
Air dry coating for high temperature and high load applications (MRO & OEM)

MOLYKOTE® 7400 ANTI-FRICTION COATING
Air dry, water-dilutable coating good for initial run-in applications

MOLYKOTE® G-0050 FG WHITE EP BEARING GREASE
Aluminum complex-thickened mineral oil food grade grease



MOLYKOTE® 1000 PASTE
Multi-purpose thread paste

MOLYKOTE® CU-7439 PLUS
Copper-based paste for ongoing lubrication

MOLYKOTE® D PASTE
White assembly paste and for ongoing lubrication

MOLYKOTE® DX PASTE
Soft white extreme pressure paste for long term lubrication

MOLYKOTE® E PASTE

Page 2/5


Heavy duty lubricating synthetic paste with excellent load-carrying capacity and wear resistance

MOLYKOTE® G-N METAL ASSEMBLY PASTE
Extreme-pressure lubricant for assembly, press fitting, threaded connections, running-in and maintenance

MOLYKOTE® HTP SOLID LUBRICANT PASTE
Solid lubricating paste for hot forming of metals

MOLYKOTE® M-77 PASTE
Silicone based MoS2 paste

MOLYKOTE® P-1900
Light-colored grease paste with solid lubricants

MOLYKOTE® P-37 ANTISEIZE PASTE
Ultra-pure metal-free antiseize paste

MOLYKOTE® P-40 PASTE
Copper-free paste for ongoing lubrication

MOLYKOTE® P-74 PASTE
Metal-free multi-purpose thread paste

MOLYKOTE® FOOD GRADE SPRAY OIL
Multi purpose mineral oil spray for food processing equipment

MOLYKOTE® L - 2110 SYNTHETIC GEAR OIL - ISO VG 100
Full Synthetic Gear Oil





MOLYKOTE® L -0168 GEAR OIL - ISO 680
Hydro treated mineral oil intended for use in worm gear applications. Contains no harsh sulfur additives
that are corrosive.

MOLYKOTE® L -1332FG SYNTHETIC HYDRAULIC & GEAR OIL
Synthetic blend, food grade hydraulic oil

MOLYKOTE® L-0346 HYDRAULIC OIL
High performance industrial hydraulic oils

Page 3/5


MOLYKOTE® L-0346FG HYDRAULIC OIL

MOLYKOTE® L-0368FG HYDRAULIC OIL

MOLYKOTE® L-0510 MULTI-PURPOSE OIL
Molykote ® multi-purpose oils provide protection and lubrication for a wide range of moving components
in industrial systems

MOLYKOTE® G-4500 MULTI-PURPOSE SYNTHETIC GREASE & AEROSOL SPRAY
Synthetic (PAO) NLGI #2 food grade grease

MOLYKOTE® G-4501 MULTI-PURPOSE SYNTHETIC GREASE
Synthetic (PAO) NLGI #1 food grade grease

MOLYKOTE® L-0610 VACUUM PUMP OIL
High-performance industrial lubricants for compressors and vacuum pumps

MOLYKOTE® L-1668FG SYNTHETIC BLEND VACUUM PUMP OIL
High-performance industrial lubricants for compressors and vacuum pumps

DOW CORNING® C-40 HIGH TEMP CHAIN LUBRICANT
Lubricant for bearings and chains exposed to high temperatures

MOLYKOTE® L -1428 HIGH TEMPERATURE CHAIN OIL
Synthetic oil composed of polyol ester and synthetic hydrocarbons intended for use in high temperature
chain applications.

MOLYKOTE® L-0115 GEAR OIL - ISO 150
High-performance industrial lubricants for gearbox and chain applications

MOLYKOTE® L-0115FG GEAR OIL - ISO 150
High-performance industrial lubricants for gearbox and chain applications

With over a ton of inventory we can deliver several Molykote greases, pastes and spray right from stock
within 24 hours of order.

Call us on +91-891-2564393

###

Project Sales Corp is India's largest distributors and stockist for Dow Corning Molykote products having
executed single orders upwards of 1 million US$. We stock the most complete range of greases, pastes,
silicone compounds, and sprays in stock at Visakhapatnam and service over 100 customers in Orissa,
Andhra Pradesh, Chhatisgarh and Bellary region.

Category Lubricants
Tags molykote, india

Page 4/5


Phone 918912564393
Fax 918912590482
Address 28 Founta Plaza
Suryabagh, Visakhapatnam, India
Zip 530020
Country India

* Contact author

Page 5/5

MRO Product Range from Project Sales Corp, India

MRO Product Range from Project Sales Corp, India

Recommended

Recommended

More Related Content

What's hot

What's hot (14)

Similar to MRO Product Range from Project Sales Corp, India

Similar to MRO Product Range from Project Sales Corp, India (20)

More from Project Sales Corp

More from Project Sales Corp (20)

Recently uploaded

Recently uploaded (20)

MRO Product Range from Project Sales Corp, India