MacGregor's Custom Machining manufactures highly energy efficient modular buildings for various markets, including commercial, retail, residential, industrial, and specialized buildings. Their modular buildings provide advantages such as steel laminated foam core insulated wall and roof panels for insulation and durability. The frames are made of structural steel. Components are prefabricated for quality control and reduced installation time. The degree of modularization depends on transportation and site requirements, ranging from fully assembled buildings to modular wall panels assembled on site.

1. MacGregor’s Custom Machining Ltd.
Eco Integrated Systems
Modular Building Solutions
Phone: 902.922.2029
Fax: 902.922.2041
Web: www.macgegors.ca
Web: www.ecointegrated.ca/

2. Building Types
 MacGregor ’ s manufacture extremely energy efficient modular buildings
for the following markets:
 Commercial Office Buildings
 High Traffic Retail
 Residential Housing and Resort Buildings
 Industrial Buildings
 Specific Purpose Buildings, such as windfarm electrical control
buildings, telecommunication tower equipment shelters, satellite
gateway buildings and hazardous material storage
 Mining, Oil &Gas and Utility Camps
 Disaster Relief Housing and Military Portable Shelters
2
6/10/2011 1:01 PM

3. Competitive Advantages
 The roof and walls of our buildings are made of steel laminated closed-
cell foam core insulated panels - which economically provide an exterior
sheathing, an uninterrupted layer of insulation free from hot or cold
transfer gaps and is insect and rodent resistant, a continuous vapour
barrier and interior sheathing - all in one complete system.
 The frames of our buildings are made of structural steel, which contains
mostly recycled material, and has been efficiently engineered to provide
hurricane rated strength and low maintenance in the harshest of hot and
cold, dry and corrosive environments.
 The building components are prefabricated in enclosed ISO certified
facilities, greatly increasing economic efficiencies and quality control.
 Our modular buildings or modular components significantly reduce
transportation cost and on-site installation time.
3
6/10/2011 1:01 PM

4. Degree of Fabrication of Modules
 Typically, the size and purpose of the building, as well as the
method/ ’ s of transportation. determine the degree of completion of the
prefabrication process.
 A completely prefabricated building, with an insulated floor,
ready for onsite installation on almost any support system: crib-
bing, sono-tubes, screw piles, cement slab, etc.
 A completely prefabricated building, without a floor, ready for
onsite installation on a cement slab.
 Two or more prefabricated modular buildings, ready to be joined
together onsite to create one larger building.
 A series of prefabricated modular wall and roof panels, shipped
flat for efficient transportation, joined together onsite to create a
large building.
4
6/10/2011 1:01 PM

5. Commercial and Retail Buildings
5
6/10/2011 1:01 PM

6. Industrial Buildings
6
6/10/2011 1:01 PM

7. Industrial Bldgs & Local Labour/Material
7
6/10/2011 1:01 PM

8. Relocatable Buildings and Camps
8
6/10/2011 1:01 PM

9. Relocatable Buildings and Camps
 Designed for rapid on site assembly, the units are air-tight and
extremely energy efficient. Standard module has R23 walls and R30
floors.
 The modular panels are shipped flat for efficient transportation and were
designed for transportation by the Hercules aircraft.
 Each module is 8 ’ 6 ” wide by 51 ’ long and can be joined to addi-
tional modules, end to end, side to side, to form a building of any size.
 Modules can also be stacked three stories on top of each other.
 When it is time to relocate the buildings, disconnect the 32 bolts per
module and the vapour barrier seals along each joint, and transport the
panels flat for reconnection at the next site.
9
6/10/2011 1:01 PM

10. Specific Purpose Buildings
10
6/10/2011 1:01 PM

11. Windfarm Control Buildings
11
6/10/2011 1:01 PM

12. CBC Generator Building
12
6/10/2011 1:01 PM

13. Telecommunication Equipment Shelters
13
6/10/2011 1:01 PM

14. Summary of Specific Purpose Buildings
 Each of these high-tech buildings are engineered to minimize costs,
including transportation; while also minimizing their environmental
impact.
 We can provide the building as an empty shell, or we can provide all of
the required electrical and mechanical equipment pre-installed for
immediate on-site commissioning.
 Our team offers custom designed PLC control systems, as well as
remote monitoring and alarm systems which can be installed in the
controlled environment of our fabrication facilities or installed in the field.
 Each building is individually engineered to meet the demanding
requirements of its specific purpose.
 Whether it is a Hazardous Materials Storage Building, the building will
keep hazardous materials in the building while placed in the most
sensitive of environments; or a Electrical Control Building, it will keep the
elements out of the building even in the harshest of environments.
14
6/10/2011 1:01 PM

15. Summary of All Building Types
 The guiding principles behind all of our modular buildings are that they:
 Maximize energy efficiency.
 Minimize environmental impact.
 Gain transportation efficiency by shipping in completed modules or
modular components of flat panels.
 Increase quality control and reduce costs by fabricating in a
controlled environment.
 Speed up project completion timelines.
 Reduce on-site material waste.
 Utilize proven high-quality materials.
 Provide clients with a completed project on time and on budget.
15
6/10/2011 1:01 PM