The E-Flex Guard is an Insulation Protector for Refrigeration Piping on Outdoor applications that comply w/ mandatory requirements, as specifically prescribed by the new Building/Residential/Energy Codes.UV Weather Protector & Vapor Retarder. #HVAC #HVACR http://www.airexmfg.com/eflex
The E-Flex Guard is an Insulation Protector for Refrigeration Piping on Outdoor applications that comply w/ mandatory requirements, as specifically prescribed by the new Building/Residential/Energy Codes.UV Weather Protector & Vapor Retarder. #HVAC #HVACR http://www.airexmfg.com/eflex
Titan Out Engineering Solution of Wall Sealing Refrigerant Line Penetrations ...Airex Manufacturing Inc
The Titan Outlet is the engineered solution of wall sealing refrigerant line penetrations featuring a weather & air leakage resistant, vibration control, rodent proofing, wall enclosure system. Air Leakage Wall Seal, Protect Indoor Air Quality! @NAHB #HVAC http://www.airexmfg.com/titan
We manufacture component products for the outdoor #HVAC equipment piping area,designed & engineered to support #sustainable #energy efficient system performance
The Titan Outlet is the engineered solution of wall sealing refrigerant line penetrations featuring a weather and air leakage resistant, vibration control, rodent proofing, wall enclosure system, and has become the preferred industry leader. http://airexmfg.com/titan/
The Titan Outlet is the engineered solution of wall sealing refrigerant line penetrations featuring a weather & air leakage resistant, vibration control, rodent proofing, wall enclosure system. Air Leakage Wall Seal, Protect Indoor Air Quality! @NAHB #HVAC http://www.airexmfg.com/titan
Roxtec UG - vedações de cabos e tubos para aplicações subterrâneasRoxtec Brasil
As vedações Roxtec UG™ (subterrâneas) para cabos e tubulações protegem seus equipamentos contra infiltração ambiental em condições normais e de inundações.
CSD Rise Multi Cable & Pipe Sealing System - Features :
Simple and effective : RISE Duct Seals are a multi-cable and pipe transit sealing system providing an effective and simple solution to all fire, gas and water tight duct sealing requirements.
Few Components : RISE Duct Seals system consist of only two components - 1) rubber insert sleeves used to guarantee cable separation and as a backing for the sealant layer, 2) FIWA sealant, a high quality silicone based, fire resistant, water repellent sealant which makes the duct seal system quick and easy to install.
Water and Gas Tight : RISE Duct Seals provide high elasticity and bonding strength which resists movement, shock and vibration providing a stable duct seal. RISE rubber insert sleeves are applied to provide cable separation and a backing for the application of the FIWA sealant. 60mm RISE sleeves are adequate for water and gas tight duct sealing.
Fire, Water and Gas Tight : RISE Duct Seals using rubber insert sleeves at a length of 160mm and applying FIWA sealant to both faces of the opening will provide a fire tight duct seal.
Flexible and Versatile : RISE Duct Seals can be used in vertical and horizontal ducts. RISE rubber insert sleeves cling to the cables without sliding down and falling out of the penetration. The high adhesion and viscosity of the duct sealant means it will not run or drip when applied overhead.
Adding and Removing Cables : RISE Duct Seals allow the installing of additional cables - it is a simple matter of coring into the soft rubber of the sealant to a depth of 20mm and passing the additional cables through the opening created. The duct sealant is then applied around the new cable to re-seal - there is no need to disassemble the transit system.
CSD Rise Multi Cable & Pipe Sealing System - Features :
Simple and effective : RISE Duct Seals are a multi-cable and pipe transit sealing system providing an effective and simple solution to all fire, gas and water tight duct sealing requirements.
Few Components : RISE Duct Seals system consist of only two components - 1) rubber insert sleeves used to guarantee cable separation and as a backing for the sealant layer, 2) FIWA sealant, a high quality silicone based, fire resistant, water repellent sealant which makes the duct seal system quick and easy to install.
Water and Gas Tight : RISE Duct Seals provide high elasticity and bonding strength which resists movement, shock and vibration providing a stable duct seal. RISE rubber insert sleeves are applied to provide cable separation and a backing for the application of the FIWA sealant. 60mm RISE sleeves are adequate for water and gas tight duct sealing.
Fire, Water and Gas Tight : RISE Duct Seals using rubber insert sleeves at a length of 160mm and applying FIWA sealant to both faces of the opening will provide a fire tight duct seal.
Flexible and Versatile : RISE Duct Seals can be used in vertical and horizontal ducts. RISE rubber insert sleeves cling to the cables without sliding down and falling out of the penetration. The high adhesion and viscosity of the duct sealant means it will not run or drip when applied overhead.
Adding and Removing Cables : RISE Duct Seals allow the installing of additional cables - it is a simple matter of coring into the soft rubber of the sealant to a depth of 20mm and passing the additional cables through the opening created. The duct sealant is then applied around the new cable to re-seal - there is no need to disassemble the transit system.
Presentation of EWEN's Flexible Thermal Insulation Jackets.
This type of jackets are substituting traditional insulation in all industries, providing a huge advantage: Remove it and Reinstall it in seconds.
The E-Flex Guard is an Insulation Protector for Refrigeration Piping on Outdoor applications that comply w/ mandatory requirements, as specifically prescribed by the new Building/Residential/Energy Codes.UV Weather Protector & Vapor Retarder. #HVAC #HVACR http://www.airexmfg.com/eflex
Titan Out Engineering Solution of Wall Sealing Refrigerant Line Penetrations ...Airex Manufacturing Inc
The Titan Outlet is the engineered solution of wall sealing refrigerant line penetrations featuring a weather & air leakage resistant, vibration control, rodent proofing, wall enclosure system. Air Leakage Wall Seal, Protect Indoor Air Quality! @NAHB #HVAC http://www.airexmfg.com/titan
We manufacture component products for the outdoor #HVAC equipment piping area,designed & engineered to support #sustainable #energy efficient system performance
The Titan Outlet is the engineered solution of wall sealing refrigerant line penetrations featuring a weather and air leakage resistant, vibration control, rodent proofing, wall enclosure system, and has become the preferred industry leader. http://airexmfg.com/titan/
The Titan Outlet is the engineered solution of wall sealing refrigerant line penetrations featuring a weather & air leakage resistant, vibration control, rodent proofing, wall enclosure system. Air Leakage Wall Seal, Protect Indoor Air Quality! @NAHB #HVAC http://www.airexmfg.com/titan
Roxtec UG - vedações de cabos e tubos para aplicações subterrâneasRoxtec Brasil
As vedações Roxtec UG™ (subterrâneas) para cabos e tubulações protegem seus equipamentos contra infiltração ambiental em condições normais e de inundações.
CSD Rise Multi Cable & Pipe Sealing System - Features :
Simple and effective : RISE Duct Seals are a multi-cable and pipe transit sealing system providing an effective and simple solution to all fire, gas and water tight duct sealing requirements.
Few Components : RISE Duct Seals system consist of only two components - 1) rubber insert sleeves used to guarantee cable separation and as a backing for the sealant layer, 2) FIWA sealant, a high quality silicone based, fire resistant, water repellent sealant which makes the duct seal system quick and easy to install.
Water and Gas Tight : RISE Duct Seals provide high elasticity and bonding strength which resists movement, shock and vibration providing a stable duct seal. RISE rubber insert sleeves are applied to provide cable separation and a backing for the application of the FIWA sealant. 60mm RISE sleeves are adequate for water and gas tight duct sealing.
Fire, Water and Gas Tight : RISE Duct Seals using rubber insert sleeves at a length of 160mm and applying FIWA sealant to both faces of the opening will provide a fire tight duct seal.
Flexible and Versatile : RISE Duct Seals can be used in vertical and horizontal ducts. RISE rubber insert sleeves cling to the cables without sliding down and falling out of the penetration. The high adhesion and viscosity of the duct sealant means it will not run or drip when applied overhead.
Adding and Removing Cables : RISE Duct Seals allow the installing of additional cables - it is a simple matter of coring into the soft rubber of the sealant to a depth of 20mm and passing the additional cables through the opening created. The duct sealant is then applied around the new cable to re-seal - there is no need to disassemble the transit system.
CSD Rise Multi Cable & Pipe Sealing System - Features :
Simple and effective : RISE Duct Seals are a multi-cable and pipe transit sealing system providing an effective and simple solution to all fire, gas and water tight duct sealing requirements.
Few Components : RISE Duct Seals system consist of only two components - 1) rubber insert sleeves used to guarantee cable separation and as a backing for the sealant layer, 2) FIWA sealant, a high quality silicone based, fire resistant, water repellent sealant which makes the duct seal system quick and easy to install.
Water and Gas Tight : RISE Duct Seals provide high elasticity and bonding strength which resists movement, shock and vibration providing a stable duct seal. RISE rubber insert sleeves are applied to provide cable separation and a backing for the application of the FIWA sealant. 60mm RISE sleeves are adequate for water and gas tight duct sealing.
Fire, Water and Gas Tight : RISE Duct Seals using rubber insert sleeves at a length of 160mm and applying FIWA sealant to both faces of the opening will provide a fire tight duct seal.
Flexible and Versatile : RISE Duct Seals can be used in vertical and horizontal ducts. RISE rubber insert sleeves cling to the cables without sliding down and falling out of the penetration. The high adhesion and viscosity of the duct sealant means it will not run or drip when applied overhead.
Adding and Removing Cables : RISE Duct Seals allow the installing of additional cables - it is a simple matter of coring into the soft rubber of the sealant to a depth of 20mm and passing the additional cables through the opening created. The duct sealant is then applied around the new cable to re-seal - there is no need to disassemble the transit system.
Presentation of EWEN's Flexible Thermal Insulation Jackets.
This type of jackets are substituting traditional insulation in all industries, providing a huge advantage: Remove it and Reinstall it in seconds.
Thomas & Betts invented and trademarked the Ty-Rap cable tie to support, fasten, bundle, clamp and manage cables and wires.
Thomas & Betts high performance Ty-Rap cable ties with integral stainless steel locking heads for industrial, hazardous area, construction and high voltage cable installations.
Thomas & Betts premium performance Ty-Rap cable ties : UV resistant, flame retardant, heat resistant, weatherproof, low and high temperature flexibility, radiation resistant (IEEE383), chemical resistant, low smoke and fume (LSF), low smoke zero halogen (LSOH), non-outgassing and metal detectable.
Thomas & Betts Ty-Rap cable ties in a choice of materials : Polyamide 6.6, Polyamide 4.6, Polyamide 12, Polypropylene, ETFE Flouropolymer, ECTFE Flourpolymer, Acetal and Stainless Steel (304 and 316 grades).
Ametalin CeaseFire™ - non-combustible, weather-proofing and vapour management...Ametalin
Ametalin are excited to announce the launch of CeaseFire™. The ultimate non-combustible weather-proofing and vapour management membrane for NCC fire-resisting systems in Australian buildings.
Ever increasing thermal performance requirements for wood-frame walls have had a dramatic impact on how we build walls. To meet these targets, exterior insulation is becoming more and more common, and methods to support the cladding are required that are strong and rigid, yet do not create significant thermal bridging through the insulation. This presentation discusses the results of recent structural testing of various different arrangements on long fasteners through exterior insulation as a method of supporting cladding while limiting thermal bridging.
Cablofil EZ Path provides a complete a certified fire protection seal for cables and pipe entries or penetrations through fire rated walls and floors - Cablofil EZ Path maintains high performance wall and floor fire barrier.
Cablofil EZ Path offers fire protection (240 minutes) for fire rated floor and wall constructions in accordance with BS476 : Part 20 and European Standard EN1366-3.
Cablofil EZ Path - Intumescent Fire Barrier for Cables
Intumescent products expand with heat creating a fire barrier filling any gaps created as combustible through penetrations (ducts, service entries, floor and wall openings) burn away, which otherwise would leave an opening for the passage of toxic smoke, heated gasses and fire. Cablofil EZ Path provides airtight barriers for toxic smoke and gas ensuring personal safety during a fire. Where cables enter a fire barrer wall or floor Cablofil EZ Path firestop materials can be installed to restore an hourly fire-rating.
Two intumescent fire protection pads cushion and compress the cables top and bottom and prevent smoke propagation through the opening even if the intumescent material does not expand (Cold Smoke). Exposed to fire or high temperatures, the intumescent fire barrier responds to flames or heat by rapidly sealing the cable pathway, duct or service entry and preventing passage of flames and smoke. Cablofil EZ Path ensures maximum fire protection and resistance whether it is empty or full - therefore EZ Path provides excellent fire protection with every new or retrofit cable installation.
Built in Future Use - Cablofil EZ Path features a built-in firestopping system that automatically adjusts to the number of cables running through - cables can be added or changed without the need to remove and re-install fire stopping materials.
Cable Tray -cables present in cable tray can provide a source of fuel to propagate fire, release toxic smoke and gases. They create openings that can compromise the fire barrier allowing spread of fire, toxic smoke and superheated gases.
No explosion from sparking
Three- application-oriented series
Sealings inserts replace EX sealing plugs
Optimum safety: EX & EMC protection
...
https://ie-net.be/reg
The Airex Pro-System Kit is a 2-In-1 system that combines air-tight sealing w/ a wall-mounted piping outlet & UV/Vapor Retarder piping insulation protector for exterior applications of #HVAC refrigerant piping penetrations & outdoor insulation. http://www.airexmfg.com/prosystem
The Airex Pro-System Kit is a 2-In-1 system that combines air-tight sealing w/ a wall-mounted piping outlet & UV/Vapor Retarder piping insulation protector for exterior applications of #HVAC refrigerant piping penetrations & outdoor insulation. http://www.airexmfg.com/prosystem
3M Silicone Cold Shrink Tubes - LSF Low Smoke Zero Halogen for Low Voltage Cable Splices, Cable Repair & Insulation Protection
3M 8443-6.5 Silicone Rubber Cold Shrink Tubes
Minimum diameter seal 8.86mm
Maximum diameter seal 14.22mm
Cold shrink tube length 132mm
*No tools or heat shrink gas torches required for installation of 3M cold shrink
*Seals tight, retains resilience and pressure even after aging and exposure
*Moisture resistant 3M silicone cold shrink
*Cold shrink resists acids and alkalies
*Resists ozone and UV ultraviolet light
*Fire resistant 3M silicone cold shrink tubings
3M Silicone Cold Shrink Applications
Primary electrical insulation of insulated wires and cable splices up to 1000 volts, insulation of electrical aircraft cables, suitable for indoor and outdoor applications, moisture sealing for high voltage (HV) air insulated cable connectors and cable lugs, insulation of secondary splices (copper and aluminium conductors), cable sheath repairs, insulation of line conductor transition connectors.
Flammability Testing of 3M Silicone Cold Shrink
3M Cold Shrink Insulators 8440 Series flammability testing was conducted with specimens positioned both vertically and horizontally per specification BSS 7230. The 3M silicone rubber cold shrink insulation passed the Flammability Test of BSS 7230 without supporting a flame. In addition, these cold shrink insulators were also subjected to a gas flame test as outlined in paragraph 4.4.15 of MIL-C-24643A and met the passing criteria as specified - no fuse was blown during the one hour flame exposure of the 3M Silicone Cold Shrink Tube.
Thomas & Betts invented and trademarked the Ty-Rap cable tie to support, fasten, bundle, clamp and manage cables and wires.
Thomas & Betts high performance Ty-Rap cable ties with integral stainless steel locking heads for industrial, hazardous area, construction and high voltage cable installations.
Thomas & Betts premium performance Ty-Rap cable ties : UV resistant, flame retardant, heat resistant, weatherproof, low and high temperature flexibility, radiation resistant (IEEE383), chemical resistant, low smoke and fume (LSF), low smoke zero halogen (LSOH), non-outgassing and metal detectable.
Thomas & Betts Ty-Rap cable ties in a choice of materials : Polyamide 6.6, Polyamide 4.6, Polyamide 12, Polypropylene, ETFE Flouropolymer, ECTFE Flourpolymer, Acetal and Stainless Steel (304 and 316 grades).
Ametalin CeaseFire™ - non-combustible, weather-proofing and vapour management...Ametalin
Ametalin are excited to announce the launch of CeaseFire™. The ultimate non-combustible weather-proofing and vapour management membrane for NCC fire-resisting systems in Australian buildings.
Ever increasing thermal performance requirements for wood-frame walls have had a dramatic impact on how we build walls. To meet these targets, exterior insulation is becoming more and more common, and methods to support the cladding are required that are strong and rigid, yet do not create significant thermal bridging through the insulation. This presentation discusses the results of recent structural testing of various different arrangements on long fasteners through exterior insulation as a method of supporting cladding while limiting thermal bridging.
Cablofil EZ Path provides a complete a certified fire protection seal for cables and pipe entries or penetrations through fire rated walls and floors - Cablofil EZ Path maintains high performance wall and floor fire barrier.
Cablofil EZ Path offers fire protection (240 minutes) for fire rated floor and wall constructions in accordance with BS476 : Part 20 and European Standard EN1366-3.
Cablofil EZ Path - Intumescent Fire Barrier for Cables
Intumescent products expand with heat creating a fire barrier filling any gaps created as combustible through penetrations (ducts, service entries, floor and wall openings) burn away, which otherwise would leave an opening for the passage of toxic smoke, heated gasses and fire. Cablofil EZ Path provides airtight barriers for toxic smoke and gas ensuring personal safety during a fire. Where cables enter a fire barrer wall or floor Cablofil EZ Path firestop materials can be installed to restore an hourly fire-rating.
Two intumescent fire protection pads cushion and compress the cables top and bottom and prevent smoke propagation through the opening even if the intumescent material does not expand (Cold Smoke). Exposed to fire or high temperatures, the intumescent fire barrier responds to flames or heat by rapidly sealing the cable pathway, duct or service entry and preventing passage of flames and smoke. Cablofil EZ Path ensures maximum fire protection and resistance whether it is empty or full - therefore EZ Path provides excellent fire protection with every new or retrofit cable installation.
Built in Future Use - Cablofil EZ Path features a built-in firestopping system that automatically adjusts to the number of cables running through - cables can be added or changed without the need to remove and re-install fire stopping materials.
Cable Tray -cables present in cable tray can provide a source of fuel to propagate fire, release toxic smoke and gases. They create openings that can compromise the fire barrier allowing spread of fire, toxic smoke and superheated gases.
No explosion from sparking
Three- application-oriented series
Sealings inserts replace EX sealing plugs
Optimum safety: EX & EMC protection
...
https://ie-net.be/reg
The Airex Pro-System Kit is a 2-In-1 system that combines air-tight sealing w/ a wall-mounted piping outlet & UV/Vapor Retarder piping insulation protector for exterior applications of #HVAC refrigerant piping penetrations & outdoor insulation. http://www.airexmfg.com/prosystem
The Airex Pro-System Kit is a 2-In-1 system that combines air-tight sealing w/ a wall-mounted piping outlet & UV/Vapor Retarder piping insulation protector for exterior applications of #HVAC refrigerant piping penetrations & outdoor insulation. http://www.airexmfg.com/prosystem
3M Silicone Cold Shrink Tubes - LSF Low Smoke Zero Halogen for Low Voltage Cable Splices, Cable Repair & Insulation Protection
3M 8443-6.5 Silicone Rubber Cold Shrink Tubes
Minimum diameter seal 8.86mm
Maximum diameter seal 14.22mm
Cold shrink tube length 132mm
*No tools or heat shrink gas torches required for installation of 3M cold shrink
*Seals tight, retains resilience and pressure even after aging and exposure
*Moisture resistant 3M silicone cold shrink
*Cold shrink resists acids and alkalies
*Resists ozone and UV ultraviolet light
*Fire resistant 3M silicone cold shrink tubings
3M Silicone Cold Shrink Applications
Primary electrical insulation of insulated wires and cable splices up to 1000 volts, insulation of electrical aircraft cables, suitable for indoor and outdoor applications, moisture sealing for high voltage (HV) air insulated cable connectors and cable lugs, insulation of secondary splices (copper and aluminium conductors), cable sheath repairs, insulation of line conductor transition connectors.
Flammability Testing of 3M Silicone Cold Shrink
3M Cold Shrink Insulators 8440 Series flammability testing was conducted with specimens positioned both vertically and horizontally per specification BSS 7230. The 3M silicone rubber cold shrink insulation passed the Flammability Test of BSS 7230 without supporting a flame. In addition, these cold shrink insulators were also subjected to a gas flame test as outlined in paragraph 4.4.15 of MIL-C-24643A and met the passing criteria as specified - no fuse was blown during the one hour flame exposure of the 3M Silicone Cold Shrink Tube.
3M Silicone Cold Shrink Tubes - LSF Low Smoke Zero Halogen for Low Voltage Cable Splices, Cable Repair & Insulation Protection
3M 8443-2 Silicone Rubber Cold Shrink Tubes
Minimum diameter seal 8.86mm
Maximum diameter seal 14.22mm
Cold shrink tube length 36mm
*No tools or heat shrink gas torches required for installation of 3M cold shrink
*Seals tight, retains resilience and pressure even after aging and exposure
*Moisture resistant 3M silicone cold shrink
*Cold shrink resists acids and alkalies
*Resists ozone and UV ultraviolet light
*Fire resistant 3M silicone cold shrink tubings
3M Silicone Cold Shrink Applications
Primary electrical insulation of insulated wires and cable splices up to 1000 volts, insulation of electrical aircraft cables, suitable for indoor and outdoor applications, moisture sealing for high voltage (HV) air insulated cable connectors and cable lugs, insulation of secondary splices (copper and aluminium conductors), cable sheath repairs, insulation of line conductor transition connectors.
Flammability Testing of 3M Silicone Cold Shrink
3M Cold Shrink Insulators 8440 Series flammability testing was conducted with specimens positioned both vertically and horizontally per specification BSS 7230. The 3M silicone rubber cold shrink insulation passed the Flammability Test of BSS 7230 without supporting a flame. In addition, these cold shrink insulators were also subjected to a gas flame test as outlined in paragraph 4.4.15 of MIL-C-24643A and met the passing criteria as specified - no fuse was blown during the one hour flame exposure of the 3M Silicone Cold Shrink Tube.
3M Silicone Cold Shrink Tubes - LSF Low Smoke Zero Halogen for Low Voltage Cable Splices, Cable Repair & Insulation Protection
3M 8447-3.2 Silicone Rubber Cold Shrink Tubes
Minimum diameter seal 14mm
Maximum diameter seal 24.13mm
Cold shrink tube length 57mm
No tools or heat shrink gas torches required for installation of 3M cold shrink
Seals tight, retains resilience and pressure even after aging and exposure
Moisture resistant 3M silicone cold shrink
Cold shrink resists acids and alkalies
Resists ozone and UV ultraviolet light
Fire resistant 3M silicone cold shrink tubings
3M Silicone Cold Shrink Applications
Primary electrical insulation of insulated wires and cable splices up to 1000 volts, insulation of electrical aircraft cables, suitable for indoor and outdoor applications, moisture sealing for high voltage (HV) air insulated cable connectors and cable lugs, insulation of secondary splices (copper and aluminium conductors), cable sheath repairs, insulation of line conductor transition connectors.
Flammability Testing of 3M Silicone Cold Shrink
3M Cold Shrink Insulators 8440 Series flammability testing was conducted with specimens positioned both vertically and horizontally per specification BSS 7230. The 3M silicone rubber cold shrink insulation passed the Flammability Test of BSS 7230 without supporting a flame. In addition, these cold shrink insulators were also subjected to a gas flame test as outlined in paragraph 4.4.15 of MIL-C-24643A and met the passing criteria as specified - no fuse was blown during the one hour flame exposure of the 3M Silicone Cold Shrink Tube
3M Silicone Cold Shrink Tubes - LSF Low Smoke Zero Halogen for Low Voltage Cable Splices, Cable Repair & Insulation Protection
3M 8445-2.5 Silicone Rubber Cold Shrink Tubes
Minimum diameter seal 10.7mm
Maximum diameter seal 18.29mm
Cold shrink tube length 43mm
*No tools or heat shrink gas torches required for installation of 3M cold shrink
*Seals tight, retains resilience and pressure even after aging and exposure
*Moisture resistant 3M silicone cold shrink
*Cold shrink resists acids and alkalies
*Resists ozone and UV ultraviolet light
*Fire resistant 3M silicone cold shrink tubings
3M Silicone Cold Shrink Applications
Primary electrical insulation of insulated wires and cable splices up to 1000 volts, insulation of electrical aircraft cables, suitable for indoor and outdoor applications, moisture sealing for high voltage (HV) air insulated cable connectors and cable lugs, insulation of secondary splices (copper and aluminium conductors), cable sheath repairs, insulation of line conductor transition connectors.
Flammability Testing of 3M Silicone Cold Shrink
3M Cold Shrink Insulators 8440 Series flammability testing was conducted with specimens positioned both vertically and horizontally per specification BSS 7230. The 3M silicone rubber cold shrink insulation passed the Flammability Test of BSS 7230 without supporting a flame. In addition, these cold shrink insulators were also subjected to a gas flame test as outlined in paragraph 4.4.15 of MIL-C-24643A and met the passing criteria as specified - no fuse was blown during the one hour flame exposure of the 3M Silicone Cold Shrink Tube.
3M Silicone Cold Shrink Tubes - LSF Low Smoke Zero Halogen for Low Voltage Cable Splices, Cable Repair & Insulation Protection
3M 8447-8 Silicone Rubber Cold Shrink Tubes
Minimum diameter seal 14mm
Maximum diameter seal 24.13mm
Cold shrink tube length 172mm
No tools or heat shrink gas torches required for installation of 3M cold shrink
Seals tight, retains resilience and pressure even after aging and exposure
Moisture resistant 3M silicone cold shrink
Cold shrink resists acids and alkalies
*Resists ozone and UV ultraviolet light
Fire resistant 3M silicone cold shrink tubings
3M Silicone Cold Shrink Applications
Primary electrical insulation of insulated wires and cable splices up to 1000 volts, insulation of electrical aircraft cables, suitable for indoor and outdoor applications, moisture sealing for high voltage (HV) air insulated cable connectors and cable lugs, insulation of secondary splices (copper and aluminium conductors), cable sheath repairs, insulation of line conductor transition connectors.
Flammability Testing of 3M Silicone Cold Shrink
3M Cold Shrink Insulators 8440 Series flammability testing was conducted with specimens positioned both vertically and horizontally per specification BSS 7230. The 3M silicone rubber cold shrink insulation passed the Flammability Test of BSS 7230 without supporting a flame. In addition, these cold shrink insulators were also subjected to a gas flame test as outlined in paragraph 4.4.15 of MIL-C-24643A and met the passing criteria as specified - no fuse was blown during the one hour flame exposure of the 3M Silicone Cold Shrink Tube
Product Summary
The E-Flex Guard is an Insulation Protector for Refrigeration Piping on Outdoor applications that complies with mandatory requirements where adhesive tapes are no longer allowed by code, and as specifically prescribed by the new Building/Residential/Energy Codes. Engineered PVC Material is UV/Weather Resistant and a Class II Vapor Retarder to comply with new energy codes, and sustainably protects outdoor pipe insulation. http://airexmfg.com/eflex/
UV Weather Protector & Vapor Retarder (All-In-One)!
Meets mandatory Building Codes, Energy, Residential, Mechanical, and Green Codes
Made in The USA
Outdoor UV/Weather Grade Resistant Construction
Self-Gripping, Dual-Bonded Hook & Loop Fastening System
Removable/Reusable for Maintenance
Protector and Class II Vapor Retarder (All-In-One)
Meets ASTM G153 Weatherization and UV
Meets ASTM E-96 Water/Vapor Permeability
http://airexmfg.com/eflex/
Vapour Permeable Air Barriers: Real World Evaluation - What Works, What Doesn...Lorne Ricketts
As insulation and airtightness requirements increase, vapour permeable liquid and self-adhesive air barrier membrane products are rapidly gaining traction in the North American marketplace. This presentation looks at real world testing of various types of these membranes and identifies potential strengths and weakness of these types of products.
Slip on fit - quick & easy to install connectors
Touchproof cable termination- fully screened connectors for safety
One part cable termination - built-in stress relief
Maintenance friendly - readily disconnectable
Nexans Euromold screened separable connectors and elbows are used to terminate highNexans Euromold Connectors voltage cables with polymeric insulation (XLPE & EPR) onto switchgear and transformer bushings up to 33kV. Screened separable connectors are also known as screened elbows or tee connectors. 2 types of connector are available i) Deadbreak : connector cannnot be connected/disconnected when energised ii) Loadbreak.
Euromold bushings are available for high voltage oil, air and gas insulated switchgear and transformers to CENELEC EN50180 and ANSI IEEE 386 standards.
Nexans Euromold Cable Connectors
Nexans Euromold manufacture 11kV-33kV pre-moulded EPDM separable elbow connectors, heat shrink cable joints and cable terminations, cold shrink cable joints and cable terminations and epoxy bushings for high voltage switchgear and transformers. Euromold cable accessories meet CENELEC HD929.1, CENELEC EN50180, IEC 137, IEEE 386 & 404. A screened cable connector is an encapsulated, safe to touch high voltage cable termination used to connect HV cables to the epoxy bushings of high voltage electrical equipment including transformers, switchgear and motors.
Advantages of Nexans Euromold HV Cable Connector Systems
No minimum distances required - suitable for compact HV substations
Safe to touch accidentally when energised
Maintenance free HV cable connectors and terminations
Quick and easy to install connectors by trained cable jointers
Fully watertight cable terminations - IP67 ingress protection
Complete cable connector ranges for 11kV to 33kV cable connections
Connectors suitable for outdoor cable termination without cable box
Tee connectors can be piggy-backed to allow multiple cable connections onto bushings
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.