Vincent Duckett
Kitchen Renovation
11.20.15
John Zierke
jzierke@cliqstudios.com
Direct Line: 952-241-8690
DWR3L
DWR3R
SB21-FHR
UF330
FP9648
BWB18DWR3L
DWR3R
FP4896
U189024-ROT-4L
RR96R
OVD3390
B
E
R
36-S
S
L
DB30-2 DB24
BSP09
BSP09
DB24 DB30-2 UF642
FP9648
BEFP
FSD306-V
FWC630
FWC630
W1236L
WR361824UF336
UF342WR361824
W1236L
WAC2436L
W3636 W1836L W153615L W361815L W153615R W1836R W3636
W2736W2742W2736W2742W2736W2742
W243001L
W1830R
36 3
4 "
48"
38"
81"
180"
198"
102"
226"
60"
1153
16"
135"9"36"
30" 72"
FP4896
WAC2436L
W1236L
UF336
OVD3390
BER36-SSL
UF330
U189024-ROT-4L
RR96R
WR361824
UF342
135"
180"96"
6"
Oven Cut Out
27" - 31"w
40" - 54"H
*To be trimmed*
* to size on site.*
4RollOutsTrays
Fridge opening
36" x 72"
without the filler
18"54"18" 36"9"
W3636W1836LWAC2436L W3636
UF336
UF336
W1836R
W361815L
W153615L
W153615R
DB30-2 DB24
BSP09
BSP09
DB24 DB30-2BER36-SSL
UF642
54"
71
4"103
4"
6" 198"
96"
Pull-out Storage
2 Wood
Lazy Susans
30" Range
36" hood
18"
FP9648
W1830RW243001L
W3636
UF642DB30-2
All decorative
doors to be
applied on site.
36"54"
80 3
4 "
OGP8
BEFP
W1830R
W3636W1236L
FWC630
FSD306-V
FWC630
DWR3L
UF330
SB21-FHR
DWR3R
54"
341
2"
80 3
4 "
Apply OGP8 along bottom as baseboard
Build-Up Toe Kick
36"
BWB18
DWR3L
DWR3R
WR361824
UF336
98 7
8 "
24"Dishwasher
Pull
Out
Trash
See Details on
sink base assembly
done on site
Build-Up Toe Kick
FP9648
98 7
8 "
Apply OGP8 along bottom as baseboard
W2736
W2742
W2736
W2742
W2736
W2742
451
4"83
4"
226"
Apply OGP8 along bottom as baseboard
These are all wall cabinets,
you will have to build structure
for the toe kick area and in
between the uppers and lowers.
42"
96"
cabinetfaceframe
cabinetdoor
Cabinet Side
wood blocking
(not provided)
3½"
ceiling
TCM8
crown molding
moves up/down
along ceiling
CTM8
UF396
¾"
3"
Crown Molding
TCM8 | CTM8 | UF396
ph: 800.576.7930 | fax: 877.675.4394 | customerservice@cliqstudios.com
CliqStudios.com®
, LLC reserves the right to change, modify or discontinue policy and products at any time.
All dimensions are nominal. This drawing is only provided as a reference and CliqStudios.com is not responsible for final installation.
CabinetFaceFrame
CabinetDoor
Base
Cabinet
Side
OGP8
wood blocking
(not provided)
Floor
Void
Toe Kick
Area
¼"
4¾"
Floor
3½"
4½"
Decorative Toekick
OGP8
ph: 800.576.7930 | fax: 877.675.4394 | customerservice@cliqstudios.com
CliqStudios.com®
, LLC reserves the right to change, modify or discontinue policy and products at any time.
All dimensions are nominal. This drawing is only provided as a reference and CliqStudios.com is not responsible for final installation.
OCM8 -Outside Corner Molding
Acutal Size
1"
1"
OCM8 molding is typically used on the back side of cabinets/islands
to conceal seams from cut panels on corners.
Front Right View
Back Left View
Decorative Molding
OCM8 | Corner Application
ph: 800.576.7930 | fax: 877.675.4394 | customerservice@cliqstudios.com
CliqStudios.com®
, LLC reserves the right to change, modify or discontinue policy and products at any time.
All dimensions are nominal. This drawing is only provided as a reference and CliqStudios.com is not responsible for final installation.
Most kitchen sinks either drop into a hole in the countertop or are mounted from underneath the countertop. An apron front,
or farm, sink slides into an opening or gap in a countertop and is supported by the cabinet and internal cradle frame work
(not provided by CliqStudios.com) directly underneath the sink.
A large porcelain or cast iron apron front sink can weigh 300 lb. or more when filled with water. The parts listed below
provide only partial support. The installer will need to provide additional cradle framework to support apron front. Apron front
sinks vary greatly in size, style and dimensions that require a custom field installation. Be sure to consult your installer
before determining the final installation. Every apron front sink installation is unique because there are no such thing as a
‘standard’ size apron front, or farm, sink.
Built up toe kick
area (4½" high), front
to back, supporting
WR cabinet
Filler installed
horizontally
DWR3
panel cut in half,
front fillers trimmed
to fit, & used on
each side of sink
Wall Refrigerator (WR)
cabinet top cut out to
allow for plumbing hook ups
WARNING! Confirm with manufacturer for sink dimension and requirements BEFORE cabinet purchase.
4½"
Farm Sink Base 36"
WR36 | DWR - Field Install
page 1 of 5
ph: 800.576.7930 | fax: 877.675.4394 | customerservice@cliqstudios.com
CliqStudios.com®
, LLC reserves the right to change, modify or discontinue policy and products at any time.
All dimensions are nominal. This drawing is only provided as a reference and CliqStudios.com is not responsible for final installation.
CliqStudios.com, LLC reserves the right to change, modify or discontinue programs at any time v 1-2015
Because walls are usually not straight, level, square, flush or plumb we recommend the following
accessories to accommodate constrution space imperfections for the floor, wall or ceiling and may have
included them in your order to finish your space.
Attention:
recommended accessories
for your designDreams designed. Dreams delivered.
96" 4½"
UF1.542 1½" 42"
UF1.596 1½" 96"
UF342 3" 42"
UF336 3" 36"
UF330 3" 30"
UF396 3" 96"
UF642 6" 42"
UF696 6" 96"
A B
A
B
¾"
96"
¾"
¾"
IQR8
ƒ Solid hardwood
ƒ Bold line represents finished edge
¾"
96"
¼"
SM8
ƒ Solid hardwood
ƒ Bold line represents
finished edge
ƒ Solid hardwood
ƒ Front & sides finished
back
wall
floor
side
wall
back
wall
floor
gap created
by filler between
cabinet & wall
Inside Quarter Round is more than a decorative accent.
It is installed after the flooring and is primarily used to
cover the gapping resulting from shims to level cabinets.
Quarter Round can also help cover up gaps in the floor -
especially with tile.
side
wall
back
wall
floor
cabinet
side
floor
back
wallside
wall
cabinet
side
FILLERS
Fillers are used to “fill” the gap between a wall and the
end run of cabinets, and sometimes between cabinets.
Fillers can also be used horizontally for decorative
molding applications. Field install and trim to width/height.
Note: Fillers also are used to provide space between
cabinet and wall for proper door swing operation to
provide cabinet access, especially with decorative
hardware and roll out trays
BTK8
ƒ Plywood veneer w/ engineered core
ƒ Bold line represents finished edge
Base ‘Toe Kick’ is used as a panel to cover up
the gapping created by the placement of
cabinets. It is applied to the recessed area
where the cabinet meets the floor.
SM8, or Scribe molding,
is used along the wall when
cabinets/fillers meet a non-plumb
wall to hide gapping between the
cabinet and the wall.
cabinet
side
Wood is a product of nature with different grain patterns, color variations, aging patterns, and mineral
streaks which add to the beauty and distinction of natural hardwood products. These wood variations
are not considered a defect and will not be subject to warranty replacement. Painted Cabinets may
require additional maintenance. Over time, painted finishes will develop hairline cracks from the results
of natural expansion and contraction of the wood.
Visit our website for more information on finish characteristics
Do not begin demolition of space or existing cabinetry prior to receipt and inspection of your new
cabinets, as missing or damaged parts may delay your installation. Any install delays, trip charges,
contractor fees, etc. due to pre-scheduling your installer are your responsibility. CliqStudios.com is not
liable for these costs, and has recommended against installation prior to inspection and receipt of all
original and replacement orders.
measurements
installation
wood & finish characteristics
You have provided, and are responsible for, all measurements. Please verify all dimensions prior to
the purchase of your cabinets:
Any changes made after the order has been placed will be subject to a 25% restocking fee and
additional shipping charges. Visit our website for more information on our Return Policy
At CliqStudios.com, we understand that remodeling projects can be stressful, time consuming, and may
disrupt areas of your home that your rely on. In our experience, making sure that you are aware of what
to expect is the most effective way to navigate the process as smoothly as possible.
Thank you for choosing CliqStudios.com for your cabinetry project!
• Appliances • Window/Door dimensions and location
• Ceiling and/or soffit heights • Special considerations & obstructions
• All drawings, renderings and design information provided by designer
Please read the following carefully prior to the purchase of your order:
what to expect
order confirmation
page 1 of 2
Dreams designed. Dreams delivered.
ph: 800.576.7930 | fax: 877.675.4394 | customerservice@cliqstudios.com
CliqStudios.com®
, LLC reserves the right to change, modify or discontinue policy and products at any time.
All dimensions are nominal. This drawing is only provided as a reference and CliqStudios.com is not responsible for final installation.
terms & conditions
_________________________________ ____________
Customer Signature Date
_________________________________
Customer Printed Name
In placing your order with Cliqstudios.com, you agree that you have read and understand this
documentation, and that you agree to the terms and conditions of Cliqstudios.com.
I have read and I understand the above Cliqstudios.com Final Steps and have verified and
approved all of the conditions, including any drawings, renderings or pictures of design plan, that
were included with the final design packet with designer.
order receipt & inspection
Once order has been received promptly inspect for any damaged or missing items. If you have any
damaged items you will need to contact Customer Service as soon as possible. Replacement orders
usually ship in less than one week.
• phone: 800.576.7930 ext. 561
• email: customerservice@cliqstudios.com
Standard Home Delivery order will be shipped to a location accessible by a pallet jack to the first
secure, dry area (usually a garage), on the same level as the truck tires. If Standard Home Delivery
cannot be accommodated please contact your designer before purchase to arrange for Limited or
Restricted delivery; additional charges will apply. Cliqstudios.com will notify you once the order has left
our facility via email. You will be contacted to schedule an eight (8) hour delivery window directly by
the delivery carrier. Shipments may be delayed due to weather, mechanical issues, holidays, or other
situations relating to delivery coordination.
standard delivery
If you haven’t already please take the time to view our video which outlines what to expect and easy
things that you can do to make the delivery and receipt of your cabinet order go as smoothly as
possible. Visit our website to view deilvery video
To send signature back to designer you may:
1. Scan & email to your designer
2. Fax to 877-675-4394 attention your designer
3. Or reply back via email confirming your agreement to the Terms & Conditions
what to expect
order confirmation
page 2 of 2
Dreams designed. Dreams delivered.
ph: 800.576.7930 | fax: 877.675.4394 | customerservice@cliqstudios.com
CliqStudios.com®
, LLC reserves the right to change, modify or discontinue policy and products at any time.
All dimensions are nominal. This drawing is only provided as a reference and CliqStudios.com is not responsible for final installation.

Duckett Design Packet 11.19.15

  • 1.
    Vincent Duckett Kitchen Renovation 11.20.15 JohnZierke jzierke@cliqstudios.com Direct Line: 952-241-8690
  • 2.
    DWR3L DWR3R SB21-FHR UF330 FP9648 BWB18DWR3L DWR3R FP4896 U189024-ROT-4L RR96R OVD3390 B E R 36-S S L DB30-2 DB24 BSP09 BSP09 DB24 DB30-2UF642 FP9648 BEFP FSD306-V FWC630 FWC630 W1236L WR361824UF336 UF342WR361824 W1236L WAC2436L W3636 W1836L W153615L W361815L W153615R W1836R W3636 W2736W2742W2736W2742W2736W2742 W243001L W1830R 36 3 4 " 48" 38" 81" 180" 198" 102" 226" 60" 1153 16" 135"9"36" 30" 72"
  • 3.
    FP4896 WAC2436L W1236L UF336 OVD3390 BER36-SSL UF330 U189024-ROT-4L RR96R WR361824 UF342 135" 180"96" 6" Oven Cut Out 27"- 31"w 40" - 54"H *To be trimmed* * to size on site.* 4RollOutsTrays Fridge opening 36" x 72" without the filler 18"54"18" 36"9"
  • 4.
    W3636W1836LWAC2436L W3636 UF336 UF336 W1836R W361815L W153615L W153615R DB30-2 DB24 BSP09 BSP09 DB24DB30-2BER36-SSL UF642 54" 71 4"103 4" 6" 198" 96" Pull-out Storage 2 Wood Lazy Susans 30" Range 36" hood 18"
  • 5.
  • 6.
  • 7.
    BWB18 DWR3L DWR3R WR361824 UF336 98 7 8 " 24"Dishwasher Pull Out Trash SeeDetails on sink base assembly done on site Build-Up Toe Kick
  • 8.
    FP9648 98 7 8 " ApplyOGP8 along bottom as baseboard
  • 9.
    W2736 W2742 W2736 W2742 W2736 W2742 451 4"83 4" 226" Apply OGP8 alongbottom as baseboard These are all wall cabinets, you will have to build structure for the toe kick area and in between the uppers and lowers. 42" 96"
  • 13.
    cabinetfaceframe cabinetdoor Cabinet Side wood blocking (notprovided) 3½" ceiling TCM8 crown molding moves up/down along ceiling CTM8 UF396 ¾" 3" Crown Molding TCM8 | CTM8 | UF396 ph: 800.576.7930 | fax: 877.675.4394 | customerservice@cliqstudios.com CliqStudios.com® , LLC reserves the right to change, modify or discontinue policy and products at any time. All dimensions are nominal. This drawing is only provided as a reference and CliqStudios.com is not responsible for final installation.
  • 14.
    CabinetFaceFrame CabinetDoor Base Cabinet Side OGP8 wood blocking (not provided) Floor Void ToeKick Area ¼" 4¾" Floor 3½" 4½" Decorative Toekick OGP8 ph: 800.576.7930 | fax: 877.675.4394 | customerservice@cliqstudios.com CliqStudios.com® , LLC reserves the right to change, modify or discontinue policy and products at any time. All dimensions are nominal. This drawing is only provided as a reference and CliqStudios.com is not responsible for final installation.
  • 15.
    OCM8 -Outside CornerMolding Acutal Size 1" 1" OCM8 molding is typically used on the back side of cabinets/islands to conceal seams from cut panels on corners. Front Right View Back Left View Decorative Molding OCM8 | Corner Application ph: 800.576.7930 | fax: 877.675.4394 | customerservice@cliqstudios.com CliqStudios.com® , LLC reserves the right to change, modify or discontinue policy and products at any time. All dimensions are nominal. This drawing is only provided as a reference and CliqStudios.com is not responsible for final installation.
  • 16.
    Most kitchen sinkseither drop into a hole in the countertop or are mounted from underneath the countertop. An apron front, or farm, sink slides into an opening or gap in a countertop and is supported by the cabinet and internal cradle frame work (not provided by CliqStudios.com) directly underneath the sink. A large porcelain or cast iron apron front sink can weigh 300 lb. or more when filled with water. The parts listed below provide only partial support. The installer will need to provide additional cradle framework to support apron front. Apron front sinks vary greatly in size, style and dimensions that require a custom field installation. Be sure to consult your installer before determining the final installation. Every apron front sink installation is unique because there are no such thing as a ‘standard’ size apron front, or farm, sink. Built up toe kick area (4½" high), front to back, supporting WR cabinet Filler installed horizontally DWR3 panel cut in half, front fillers trimmed to fit, & used on each side of sink Wall Refrigerator (WR) cabinet top cut out to allow for plumbing hook ups WARNING! Confirm with manufacturer for sink dimension and requirements BEFORE cabinet purchase. 4½" Farm Sink Base 36" WR36 | DWR - Field Install page 1 of 5 ph: 800.576.7930 | fax: 877.675.4394 | customerservice@cliqstudios.com CliqStudios.com® , LLC reserves the right to change, modify or discontinue policy and products at any time. All dimensions are nominal. This drawing is only provided as a reference and CliqStudios.com is not responsible for final installation.
  • 17.
    CliqStudios.com, LLC reservesthe right to change, modify or discontinue programs at any time v 1-2015 Because walls are usually not straight, level, square, flush or plumb we recommend the following accessories to accommodate constrution space imperfections for the floor, wall or ceiling and may have included them in your order to finish your space. Attention: recommended accessories for your designDreams designed. Dreams delivered. 96" 4½" UF1.542 1½" 42" UF1.596 1½" 96" UF342 3" 42" UF336 3" 36" UF330 3" 30" UF396 3" 96" UF642 6" 42" UF696 6" 96" A B A B ¾" 96" ¾" ¾" IQR8 ƒ Solid hardwood ƒ Bold line represents finished edge ¾" 96" ¼" SM8 ƒ Solid hardwood ƒ Bold line represents finished edge ƒ Solid hardwood ƒ Front & sides finished back wall floor side wall back wall floor gap created by filler between cabinet & wall Inside Quarter Round is more than a decorative accent. It is installed after the flooring and is primarily used to cover the gapping resulting from shims to level cabinets. Quarter Round can also help cover up gaps in the floor - especially with tile. side wall back wall floor cabinet side floor back wallside wall cabinet side FILLERS Fillers are used to “fill” the gap between a wall and the end run of cabinets, and sometimes between cabinets. Fillers can also be used horizontally for decorative molding applications. Field install and trim to width/height. Note: Fillers also are used to provide space between cabinet and wall for proper door swing operation to provide cabinet access, especially with decorative hardware and roll out trays BTK8 ƒ Plywood veneer w/ engineered core ƒ Bold line represents finished edge Base ‘Toe Kick’ is used as a panel to cover up the gapping created by the placement of cabinets. It is applied to the recessed area where the cabinet meets the floor. SM8, or Scribe molding, is used along the wall when cabinets/fillers meet a non-plumb wall to hide gapping between the cabinet and the wall. cabinet side
  • 18.
    Wood is aproduct of nature with different grain patterns, color variations, aging patterns, and mineral streaks which add to the beauty and distinction of natural hardwood products. These wood variations are not considered a defect and will not be subject to warranty replacement. Painted Cabinets may require additional maintenance. Over time, painted finishes will develop hairline cracks from the results of natural expansion and contraction of the wood. Visit our website for more information on finish characteristics Do not begin demolition of space or existing cabinetry prior to receipt and inspection of your new cabinets, as missing or damaged parts may delay your installation. Any install delays, trip charges, contractor fees, etc. due to pre-scheduling your installer are your responsibility. CliqStudios.com is not liable for these costs, and has recommended against installation prior to inspection and receipt of all original and replacement orders. measurements installation wood & finish characteristics You have provided, and are responsible for, all measurements. Please verify all dimensions prior to the purchase of your cabinets: Any changes made after the order has been placed will be subject to a 25% restocking fee and additional shipping charges. Visit our website for more information on our Return Policy At CliqStudios.com, we understand that remodeling projects can be stressful, time consuming, and may disrupt areas of your home that your rely on. In our experience, making sure that you are aware of what to expect is the most effective way to navigate the process as smoothly as possible. Thank you for choosing CliqStudios.com for your cabinetry project! • Appliances • Window/Door dimensions and location • Ceiling and/or soffit heights • Special considerations & obstructions • All drawings, renderings and design information provided by designer Please read the following carefully prior to the purchase of your order: what to expect order confirmation page 1 of 2 Dreams designed. Dreams delivered. ph: 800.576.7930 | fax: 877.675.4394 | customerservice@cliqstudios.com CliqStudios.com® , LLC reserves the right to change, modify or discontinue policy and products at any time. All dimensions are nominal. This drawing is only provided as a reference and CliqStudios.com is not responsible for final installation.
  • 19.
    terms & conditions _____________________________________________ Customer Signature Date _________________________________ Customer Printed Name In placing your order with Cliqstudios.com, you agree that you have read and understand this documentation, and that you agree to the terms and conditions of Cliqstudios.com. I have read and I understand the above Cliqstudios.com Final Steps and have verified and approved all of the conditions, including any drawings, renderings or pictures of design plan, that were included with the final design packet with designer. order receipt & inspection Once order has been received promptly inspect for any damaged or missing items. If you have any damaged items you will need to contact Customer Service as soon as possible. Replacement orders usually ship in less than one week. • phone: 800.576.7930 ext. 561 • email: customerservice@cliqstudios.com Standard Home Delivery order will be shipped to a location accessible by a pallet jack to the first secure, dry area (usually a garage), on the same level as the truck tires. If Standard Home Delivery cannot be accommodated please contact your designer before purchase to arrange for Limited or Restricted delivery; additional charges will apply. Cliqstudios.com will notify you once the order has left our facility via email. You will be contacted to schedule an eight (8) hour delivery window directly by the delivery carrier. Shipments may be delayed due to weather, mechanical issues, holidays, or other situations relating to delivery coordination. standard delivery If you haven’t already please take the time to view our video which outlines what to expect and easy things that you can do to make the delivery and receipt of your cabinet order go as smoothly as possible. Visit our website to view deilvery video To send signature back to designer you may: 1. Scan & email to your designer 2. Fax to 877-675-4394 attention your designer 3. Or reply back via email confirming your agreement to the Terms & Conditions what to expect order confirmation page 2 of 2 Dreams designed. Dreams delivered. ph: 800.576.7930 | fax: 877.675.4394 | customerservice@cliqstudios.com CliqStudios.com® , LLC reserves the right to change, modify or discontinue policy and products at any time. All dimensions are nominal. This drawing is only provided as a reference and CliqStudios.com is not responsible for final installation.