Desiccant dehumidifier -MDC6000 from Destech.eu
•
0 likes•341 views
Dehumidifiers are indeed very helpful. While buying just check out for the best quality options available in the market. Well, I can recommend a website Destech.eu where you can get information on best buys of Commercial Dehumidifiers. Just Click on this if you're interested : http://destech.eu/
Report
Share
Report
Share
Download to read offline
Recommended
Energy conservation with new bruckner stenter
This document discusses Bruckner, a German textile finishing company. It describes Bruckner's Power-Frame stenter, which uses optimized technologies like split flow systems and venturi nozzles for efficient drying. The document also details Bruckner's Eco-Heat and Eco-Air systems which enable heat recovery and highly efficient air filtration to reduce energy consumption and costs. Case studies show these technologies achieving energy savings of up to 35% for customers like Lucky Tex in Pakistan.
Cmf
Our company produces filter cages using modern machinery and experienced technicians. The cages are made of galvanized steel, which lasts 5-7 years, or stainless steel, which lasts over 10 years. Standard cage sizes range from 115mm to 153mm in diameter and 2000mm to 6000mm in length. We have a production capacity of approximately 500 cages per day. Dust collectors are systems that clean air or gas by collecting dust and other impurities using various separation methods like inertial separation, fabric filters, wet scrubbers, electrostatic precipitation, or unit collectors. They are designed to handle high volumes of dust and consist of a blower, dust filter, filter cleaning system, and dust removal system.
Vacumobil 200-en
The document describes the Vacumobil 200, a mobile dust extraction device produced by Höcker Polytechnik. It features improvements in energy efficiency, size, performance, and flexibility. It can reliably extract wood dust and filter air with powerful suction and various filter cleaning processes. It is certified to extract dust to levels below 0.1 mg/m3 and uses energy efficient motors.
EFFICIENCY OF BAG FILTER IN REDUCING SPM LEVEL
The document summarizes a study on the efficiency of bag filters in reducing suspended particulate matter levels at a textile mill in Surat, India. The textile mill was producing high levels of particulate emissions from its steam boiler and thermic fluid heater. It installed new bag filters equipped with an automatic inlet damper system. Testing found that the suspended particulate matter level dropped significantly from 138.6 mg/Nm3 to 88 mg/Nm3 after adopting the new bag filters. The bag filters were also more durable and reduced operating costs compared to the previous fiberglass bags. It was concluded that the bag filters effectively controlled particulate emissions and improved air quality.
M65 JetClean
The M65 JetClean vacuum cleaner has been in production since 1972. It is powered by three 5.2 kW motors and can generate 250 mBar of vacuum pressure. It features a 65L collection bin and uses a cartridge filtration system along with an optional HEPA filter. The JetClean system utilizes pressure differences to clean the filter cartridge while the vacuum is running, keeping the filter surface clean and maintaining high air flow.
Multi star en
The document discusses MultiStar dust collectors from Höcker Polytechnik. It summarizes that the MultiStar offers modular, flexible, and energy efficient dust collection solutions for a variety of industries. It has individual filter elements, proven stability, and maximum energy efficiency. The MultiStar follows the evolutionary path of machinery to achieve high extraction performance with minimum energy consumption. It is suitable for applications across many industries and can be customized with different housing and filter sizes.
Vacumobil 350 pp-en
The Vacumobil 350 is a powerful dust extractor suited for dust extraction from CNC machines or multiple production machines. It features compact design, configurable modular systems, and flexible applications. It has automatic filter cleaning via compressed air pulse or vibration. Options include a more powerful 15 kW motor and frequency converter for up to 3700 Pa vacuum. The extractor has integrated fire suppression and certified explosion-proof components, allowing installation in work areas.
Presentation on candle filter bag
The document discusses candle filters, which use cylindrical tubes to filter slurry from the outside in. The tubes accumulate cake on the inside, which is discharged through pulsing. Candle filters work by pressure and have a pre-coating stage followed by slurry pumping and cake formation. The cake is then removed by vacuum. Key specifications are an area of 50-150 m^2, vessel diameter of 2-3 m, and cake thickness of 50-100mm. It can operate under 6 bars of pressure. Components include filtrate, tubes, inlet, scavenger, air vent, screw jet, and cake discharge outlet.
Recommended
Energy conservation with new bruckner stenter
This document discusses Bruckner, a German textile finishing company. It describes Bruckner's Power-Frame stenter, which uses optimized technologies like split flow systems and venturi nozzles for efficient drying. The document also details Bruckner's Eco-Heat and Eco-Air systems which enable heat recovery and highly efficient air filtration to reduce energy consumption and costs. Case studies show these technologies achieving energy savings of up to 35% for customers like Lucky Tex in Pakistan.
Cmf
Our company produces filter cages using modern machinery and experienced technicians. The cages are made of galvanized steel, which lasts 5-7 years, or stainless steel, which lasts over 10 years. Standard cage sizes range from 115mm to 153mm in diameter and 2000mm to 6000mm in length. We have a production capacity of approximately 500 cages per day. Dust collectors are systems that clean air or gas by collecting dust and other impurities using various separation methods like inertial separation, fabric filters, wet scrubbers, electrostatic precipitation, or unit collectors. They are designed to handle high volumes of dust and consist of a blower, dust filter, filter cleaning system, and dust removal system.
Vacumobil 200-en
The document describes the Vacumobil 200, a mobile dust extraction device produced by Höcker Polytechnik. It features improvements in energy efficiency, size, performance, and flexibility. It can reliably extract wood dust and filter air with powerful suction and various filter cleaning processes. It is certified to extract dust to levels below 0.1 mg/m3 and uses energy efficient motors.
EFFICIENCY OF BAG FILTER IN REDUCING SPM LEVEL
The document summarizes a study on the efficiency of bag filters in reducing suspended particulate matter levels at a textile mill in Surat, India. The textile mill was producing high levels of particulate emissions from its steam boiler and thermic fluid heater. It installed new bag filters equipped with an automatic inlet damper system. Testing found that the suspended particulate matter level dropped significantly from 138.6 mg/Nm3 to 88 mg/Nm3 after adopting the new bag filters. The bag filters were also more durable and reduced operating costs compared to the previous fiberglass bags. It was concluded that the bag filters effectively controlled particulate emissions and improved air quality.
M65 JetClean
The M65 JetClean vacuum cleaner has been in production since 1972. It is powered by three 5.2 kW motors and can generate 250 mBar of vacuum pressure. It features a 65L collection bin and uses a cartridge filtration system along with an optional HEPA filter. The JetClean system utilizes pressure differences to clean the filter cartridge while the vacuum is running, keeping the filter surface clean and maintaining high air flow.
Multi star en
The document discusses MultiStar dust collectors from Höcker Polytechnik. It summarizes that the MultiStar offers modular, flexible, and energy efficient dust collection solutions for a variety of industries. It has individual filter elements, proven stability, and maximum energy efficiency. The MultiStar follows the evolutionary path of machinery to achieve high extraction performance with minimum energy consumption. It is suitable for applications across many industries and can be customized with different housing and filter sizes.
Vacumobil 350 pp-en
The Vacumobil 350 is a powerful dust extractor suited for dust extraction from CNC machines or multiple production machines. It features compact design, configurable modular systems, and flexible applications. It has automatic filter cleaning via compressed air pulse or vibration. Options include a more powerful 15 kW motor and frequency converter for up to 3700 Pa vacuum. The extractor has integrated fire suppression and certified explosion-proof components, allowing installation in work areas.
Presentation on candle filter bag
The document discusses candle filters, which use cylindrical tubes to filter slurry from the outside in. The tubes accumulate cake on the inside, which is discharged through pulsing. Candle filters work by pressure and have a pre-coating stage followed by slurry pumping and cake formation. The cake is then removed by vacuum. Key specifications are an area of 50-150 m^2, vessel diameter of 2-3 m, and cake thickness of 50-100mm. It can operate under 6 bars of pressure. Components include filtrate, tubes, inlet, scavenger, air vent, screw jet, and cake discharge outlet.
Vde18 Folder A4
This document discusses bast fibre processing equipment provided by Van Dommele Engineering. It describes their pneumatic transport and filtration systems for natural and synthetic fibres, as well as waste materials. It also details their bast fibre processing lines, which separate fibre and core from plants like hemp, flax, and kenaf. Their equipment includes decorticators, refining lines, scutching turbines, core cleaning systems, and pneumatic transport systems to move materials through the processing. Van Dommele provides turnkey projects and services including engineering, manufacturing, assembly, and start-up support.
03wsc13
This document provides an overview of dust collection and maintenance from Kice Industries. It discusses what dust is, why it is a problem, and where it occurs in facilities. It then covers dry-type collectors like cyclones and baghouse filters, explaining factors that affect their efficiency. The document emphasizes proper installation and maintenance, describing different baghouse configurations and cleaning systems. Formulas are presented for measuring air velocity, volume, and calculating ratios like air to cloth for baghouse design. Overall it aims to educate on best practices for dust control system design and operation.
use of steaming in textile processing machinery
The document discusses different types of steamers used in textile processing. It begins by introducing steaming and its importance in textile pretreatment, dyeing, finishing and printing processes. It then describes two main types of steamers - continuous and discontinuous. Under continuous steamers it lists different machine designs like festoon, tower, and rainbow types. For discontinuous it lists cottage and vacuum high pressure types. The document then provides details on specific steamer models and their features, including BEN-BLEACH, REACTA, GOLLER COMPLEXA, and BEN-COLOUR steamers. It discusses continuous pad-dry-pad steam processes and includes technical specifications and photos of various steamer machines.
Fly ash as a wood substitute
Fly ash is a waste material produced from coal combustion in thermal power plants that causes pollution problems. It can be used as a wood substitute material to create doors, windows, furniture and other wood products in an environmentally friendly and cost effective way. A proposed plant would produce 12,000 square meters of fly ash composite doors and panels annually, requiring an investment of $263,000. Fly ash products are stronger, more durable and require less maintenance than wood while utilizing an industrial waste.
Benninger Merceriser
Hot mercerization is a process that treats cotton fiber with caustic soda at 60-70°C rather than room temperature. This allows for deeper penetration of the caustic into the cotton yarn core for more uniform mercerization. Key benefits include better dye uptake, control of shrinkage, and higher productivity due to reduced dwell time of 25-30 seconds compared to 45-60 seconds for conventional cold mercerization. Modern hot mercerization machines utilize a chain system for transporting fabric and can process a range of fabric weights while closely controlling process parameters such as concentration, temperature and dwell time.
Technical development of wet processing
This document discusses recent technical developments in wet processing for the textile industry. It covers innovations in dyes and chemicals, preparation, dyeing, printing, finishing, digital printing, biotechnology, nanotechnology, and ultrasonic textile processing. New environmentally friendly products are highlighted from companies like Archroma, Americhem, HeiQ Materials, and Novozymes. Machinery innovations from Benninger focus on reducing the carbon footprint and environmental impact of wet processing.
Wet process technology
Wet process technology involves dyeing grey fabric through several steps to ensure it has the proper physical and chemical properties for coloring. These steps include inspecting the fabric for defects, stitching to increase length, singeing to remove stray fibers, desizing to remove starches, scouring to remove natural and external impurities, bleaching to remove natural colors, mercerizing to impart strength and absorbency, dyeing to add color, printing to create patterns, and finishing treatments before folding, packaging, and delivery.
Textile mechine
Machinery for textile preparation can be classified as batch, semi-continuous, or continuous. Batch machines are used for fibers, yarns, and fabrics/garments. Common batch machines include kiers for scouring cotton ropes, jiggers for pre-treating open-width fabrics, and winches for processing delicate fabrics with low tension. Semi-continuous and continuous machines like padding mangles and J-boxes allow for larger fabric volumes to be processed. These pass fabric continuously through stages for chemical application, dwell time, and rinsing. Mercerization swells cotton fibers in a caustic soda solution to improve luster, strength, and dye uptake.
Presentation on Textile Desizing
Desizing is the process of removing size material from warp yarns in woven fabrics to facilitate weaving. Size is applied before weaving to prevent breakage on the loom but must be removed before dyeing and finishing. There are two main methods of desizing - hydrolytic and oxidative. Hydrolytic methods like enzymatic desizing use enzymes like amylase to hydrolyze and reduce the molecular weight of starch size. Oxidative desizing uses oxidizing agents like bromides but risks damaging the cellulose fibers. Complete removal of size is important for effective dyeing and is tested by checking for color change or measuring weight loss in the fabric.
Punzonadora de torreta Boschert Combi Láser
Punzonadora de torreta Boschert combinada con Láser de fibra, rompe los paradigmas de baja productividad y reducida versatilidad, con la punzonadora Boschert se integra en una solo solución ambas tecnologías que permiten obtener piezas complejas y con riqueza de forma que aseguran la identidad del producto manufacturado.
L textile industry
The document discusses industrial waste treatment from the textile industry. Textile mills use various fibers like cotton, wool, or synthetics that generate different types of wastewater. The wastewater pollutants come from the fibers and chemicals used in processing. Cotton textile mills produce yarn from raw cotton through steps like opening, cleaning, picking, carding, drawing and spinning - which are dry operations that do not produce liquid waste. Wet processes like scouring, bleaching, mercerizing, dyeing and finishing generate wastewater with varying properties. Common chemicals used include enzymes, caustic soda, peroxides, and dyes. Textile mill waste is characterized by a pH of 9.8
TEXTILE MANUFACTURING PROCESS
Rerouting rope-guides, which determine the route fabrics take through dyeing machines, reduced water use by 6.2% on average for 5 dye recipes. Counter-current washing, where wastewater is recycled from the last wash step to the next, reduced consumption by 50-80% compared to normal flow washing and showed decreasing pollution concentrations from the first to last wash tanks. Both techniques provide simple, effective ways to minimize water and wastewater in textile dyeing and finishing.
Roots Enviro Systems
Roots Enviro Systems is an environmental engineering company focused on industrial ventilation and air pollution control systems. The company offers innovative products and turn-key solutions for applications across various industries. These include natural ventilators, scrubbers, biofilters, ducting systems, and baghouse filters. Roots Enviro has collaboration with German companies for scrubber and biofilter technologies.
Presentation on Dyeing
This document discusses dyeing and the dyeing process. It begins by defining dyeing as the process of adding color to textile materials like fibers, yarns, and fabrics using dyes and chemicals. It then describes the two primary types of dyes as natural dyes derived from plants and minerals, and synthetic dyes made in laboratories from sources like coal tar. The document outlines several dyeing methods including mass coloration, fiber dyeing, yarn dyeing, fabric dyeing, and continuous and garment dyeing. It also explains the three steps of the dyeing process as preparation, dyeing, and finishing.
Filter
This document discusses various topics related to fabric filter design and operation including:
1) Fabric selection factors such as packing density and fiber type.
2) Common cleaning methods like shaker, reverse-air, and pulse-jet cleaning and their pros and cons.
3) Key filtration mechanisms like diffusion, impaction, and interception and how efficiency is affected by particle size.
4) Parameters that influence pressure drop over time like dust loading and filter drag coefficients.
5) Design considerations for factors like compartmentalization and cleaning cycle timing.
Euro90_en
The document describes a modular electrostatic painting system consisting of 5 stages: 1) spray pretreatment tunnel, 2) drying oven, 3) automatic painting booth, 4) curing oven, and 5) loading/unloading zone. It provides details on the technical specifications and capabilities of the system, advantages like modularity and quality, and environmental features such as water and energy savings.
Nuevo laser boschert 2019
The document describes the Boschert FiberLaser cutting system. It provides specifications for the 3015 and 4020 models, which have working areas of 1500x3000mm and 2000x4000mm respectively. The lasers come in 1kW, 2kW, or 4kW options. The design allows for easy loading/unloading and extraction of cut parts down to 350x1500mm/2000mm size. Safety features include laser enclosure and exhaust system. The control system features a database for automatic parameter selection.
Specification laminarflow
The document describes the purpose, specifications, and operation of a laminar flow bench used in microbiological inoculations. The bench provides a sterile work area through double filtration of air and UV light to remove microbes. It has a 120 cm x 60 cm work surface, filters with 98% efficiency for particles over 0.3 μM, and blows filtered air across the work area at 3 m3 per minute to maintain sterility during microbial procedures. Performance tests show filtration removes 98% of particles over 0.3 μM to keep the work environment microbe-free.
Manufacturing process of textile industries (Printing and dyeing process of f...
Manufacturing process of textile industries (Printing and dyeing process of f...Muhammad Umair Akram
This document is actually based practical research That was completed during my internship in AMSONS textiles mills (pvt.) ltd Karachi, Sindhi, Pakistan. This document will really help you in your studies and will make it easy for you to understand about the process that are usually followed during printing and dyeing of fabric. In this document the quality control procedures of textile industry are also discussed.Scouring process
Scouring is a process that removes natural impurities from fabrics like cotton to make them hydrophilic. It involves treating fabrics with alkali at an elevated temperature. This breaks down fatty acids on the fabric surface. There are two main scouring methods - kier boiling and scouring in a J-box. Kier boiling is a batch process where fabric is packed in a vessel and treated with hot alkali solution. Scouring in a J-box is a continuous process where fabric passes through different sections for impregnation, heating, and washing. The scouring process prepares fabrics for downstream wet processing like dyeing by removing oils and increasing absorbency.
Literate environment analysis ppt
I. The document summarizes Lynn Lanier's analysis of creating an effective literacy environment for young students.
II. Key aspects of the literacy environment discussed include getting to know learners through assessments, selecting engaging texts matched to students' levels, and implementing an interactive, critical, and response-based literacy framework.
III. Examples are provided of literacy lessons incorporating these perspectives, including using decoding strategies, comparing texts, and developing comprehension. Research supporting the approaches is also referenced.
The ‘Roundtable: Tourism on Human Rights’ (Europe) – how it began via Skype -...
A multi-stakeholder workshop on Responsible Tourism and Human Rights in Myanmar was held in Naypyidaw from 30 September to 2 October by the Myanmar Centre for Responsible Business and the Hanns Seidel Foundation.
More Related Content
What's hot
Vde18 Folder A4
This document discusses bast fibre processing equipment provided by Van Dommele Engineering. It describes their pneumatic transport and filtration systems for natural and synthetic fibres, as well as waste materials. It also details their bast fibre processing lines, which separate fibre and core from plants like hemp, flax, and kenaf. Their equipment includes decorticators, refining lines, scutching turbines, core cleaning systems, and pneumatic transport systems to move materials through the processing. Van Dommele provides turnkey projects and services including engineering, manufacturing, assembly, and start-up support.
03wsc13
This document provides an overview of dust collection and maintenance from Kice Industries. It discusses what dust is, why it is a problem, and where it occurs in facilities. It then covers dry-type collectors like cyclones and baghouse filters, explaining factors that affect their efficiency. The document emphasizes proper installation and maintenance, describing different baghouse configurations and cleaning systems. Formulas are presented for measuring air velocity, volume, and calculating ratios like air to cloth for baghouse design. Overall it aims to educate on best practices for dust control system design and operation.
use of steaming in textile processing machinery
The document discusses different types of steamers used in textile processing. It begins by introducing steaming and its importance in textile pretreatment, dyeing, finishing and printing processes. It then describes two main types of steamers - continuous and discontinuous. Under continuous steamers it lists different machine designs like festoon, tower, and rainbow types. For discontinuous it lists cottage and vacuum high pressure types. The document then provides details on specific steamer models and their features, including BEN-BLEACH, REACTA, GOLLER COMPLEXA, and BEN-COLOUR steamers. It discusses continuous pad-dry-pad steam processes and includes technical specifications and photos of various steamer machines.
Fly ash as a wood substitute
Fly ash is a waste material produced from coal combustion in thermal power plants that causes pollution problems. It can be used as a wood substitute material to create doors, windows, furniture and other wood products in an environmentally friendly and cost effective way. A proposed plant would produce 12,000 square meters of fly ash composite doors and panels annually, requiring an investment of $263,000. Fly ash products are stronger, more durable and require less maintenance than wood while utilizing an industrial waste.
Benninger Merceriser
Hot mercerization is a process that treats cotton fiber with caustic soda at 60-70°C rather than room temperature. This allows for deeper penetration of the caustic into the cotton yarn core for more uniform mercerization. Key benefits include better dye uptake, control of shrinkage, and higher productivity due to reduced dwell time of 25-30 seconds compared to 45-60 seconds for conventional cold mercerization. Modern hot mercerization machines utilize a chain system for transporting fabric and can process a range of fabric weights while closely controlling process parameters such as concentration, temperature and dwell time.
Technical development of wet processing
This document discusses recent technical developments in wet processing for the textile industry. It covers innovations in dyes and chemicals, preparation, dyeing, printing, finishing, digital printing, biotechnology, nanotechnology, and ultrasonic textile processing. New environmentally friendly products are highlighted from companies like Archroma, Americhem, HeiQ Materials, and Novozymes. Machinery innovations from Benninger focus on reducing the carbon footprint and environmental impact of wet processing.
Wet process technology
Wet process technology involves dyeing grey fabric through several steps to ensure it has the proper physical and chemical properties for coloring. These steps include inspecting the fabric for defects, stitching to increase length, singeing to remove stray fibers, desizing to remove starches, scouring to remove natural and external impurities, bleaching to remove natural colors, mercerizing to impart strength and absorbency, dyeing to add color, printing to create patterns, and finishing treatments before folding, packaging, and delivery.
Textile mechine
Machinery for textile preparation can be classified as batch, semi-continuous, or continuous. Batch machines are used for fibers, yarns, and fabrics/garments. Common batch machines include kiers for scouring cotton ropes, jiggers for pre-treating open-width fabrics, and winches for processing delicate fabrics with low tension. Semi-continuous and continuous machines like padding mangles and J-boxes allow for larger fabric volumes to be processed. These pass fabric continuously through stages for chemical application, dwell time, and rinsing. Mercerization swells cotton fibers in a caustic soda solution to improve luster, strength, and dye uptake.
Presentation on Textile Desizing
Desizing is the process of removing size material from warp yarns in woven fabrics to facilitate weaving. Size is applied before weaving to prevent breakage on the loom but must be removed before dyeing and finishing. There are two main methods of desizing - hydrolytic and oxidative. Hydrolytic methods like enzymatic desizing use enzymes like amylase to hydrolyze and reduce the molecular weight of starch size. Oxidative desizing uses oxidizing agents like bromides but risks damaging the cellulose fibers. Complete removal of size is important for effective dyeing and is tested by checking for color change or measuring weight loss in the fabric.
Punzonadora de torreta Boschert Combi Láser
Punzonadora de torreta Boschert combinada con Láser de fibra, rompe los paradigmas de baja productividad y reducida versatilidad, con la punzonadora Boschert se integra en una solo solución ambas tecnologías que permiten obtener piezas complejas y con riqueza de forma que aseguran la identidad del producto manufacturado.
L textile industry
The document discusses industrial waste treatment from the textile industry. Textile mills use various fibers like cotton, wool, or synthetics that generate different types of wastewater. The wastewater pollutants come from the fibers and chemicals used in processing. Cotton textile mills produce yarn from raw cotton through steps like opening, cleaning, picking, carding, drawing and spinning - which are dry operations that do not produce liquid waste. Wet processes like scouring, bleaching, mercerizing, dyeing and finishing generate wastewater with varying properties. Common chemicals used include enzymes, caustic soda, peroxides, and dyes. Textile mill waste is characterized by a pH of 9.8
TEXTILE MANUFACTURING PROCESS
Rerouting rope-guides, which determine the route fabrics take through dyeing machines, reduced water use by 6.2% on average for 5 dye recipes. Counter-current washing, where wastewater is recycled from the last wash step to the next, reduced consumption by 50-80% compared to normal flow washing and showed decreasing pollution concentrations from the first to last wash tanks. Both techniques provide simple, effective ways to minimize water and wastewater in textile dyeing and finishing.
Roots Enviro Systems
Roots Enviro Systems is an environmental engineering company focused on industrial ventilation and air pollution control systems. The company offers innovative products and turn-key solutions for applications across various industries. These include natural ventilators, scrubbers, biofilters, ducting systems, and baghouse filters. Roots Enviro has collaboration with German companies for scrubber and biofilter technologies.
Presentation on Dyeing
This document discusses dyeing and the dyeing process. It begins by defining dyeing as the process of adding color to textile materials like fibers, yarns, and fabrics using dyes and chemicals. It then describes the two primary types of dyes as natural dyes derived from plants and minerals, and synthetic dyes made in laboratories from sources like coal tar. The document outlines several dyeing methods including mass coloration, fiber dyeing, yarn dyeing, fabric dyeing, and continuous and garment dyeing. It also explains the three steps of the dyeing process as preparation, dyeing, and finishing.
Filter
This document discusses various topics related to fabric filter design and operation including:
1) Fabric selection factors such as packing density and fiber type.
2) Common cleaning methods like shaker, reverse-air, and pulse-jet cleaning and their pros and cons.
3) Key filtration mechanisms like diffusion, impaction, and interception and how efficiency is affected by particle size.
4) Parameters that influence pressure drop over time like dust loading and filter drag coefficients.
5) Design considerations for factors like compartmentalization and cleaning cycle timing.
Euro90_en
The document describes a modular electrostatic painting system consisting of 5 stages: 1) spray pretreatment tunnel, 2) drying oven, 3) automatic painting booth, 4) curing oven, and 5) loading/unloading zone. It provides details on the technical specifications and capabilities of the system, advantages like modularity and quality, and environmental features such as water and energy savings.
Nuevo laser boschert 2019
The document describes the Boschert FiberLaser cutting system. It provides specifications for the 3015 and 4020 models, which have working areas of 1500x3000mm and 2000x4000mm respectively. The lasers come in 1kW, 2kW, or 4kW options. The design allows for easy loading/unloading and extraction of cut parts down to 350x1500mm/2000mm size. Safety features include laser enclosure and exhaust system. The control system features a database for automatic parameter selection.
Specification laminarflow
The document describes the purpose, specifications, and operation of a laminar flow bench used in microbiological inoculations. The bench provides a sterile work area through double filtration of air and UV light to remove microbes. It has a 120 cm x 60 cm work surface, filters with 98% efficiency for particles over 0.3 μM, and blows filtered air across the work area at 3 m3 per minute to maintain sterility during microbial procedures. Performance tests show filtration removes 98% of particles over 0.3 μM to keep the work environment microbe-free.
Manufacturing process of textile industries (Printing and dyeing process of f...
Manufacturing process of textile industries (Printing and dyeing process of f...Muhammad Umair Akram
This document is actually based practical research That was completed during my internship in AMSONS textiles mills (pvt.) ltd Karachi, Sindhi, Pakistan. This document will really help you in your studies and will make it easy for you to understand about the process that are usually followed during printing and dyeing of fabric. In this document the quality control procedures of textile industry are also discussed.Scouring process
Scouring is a process that removes natural impurities from fabrics like cotton to make them hydrophilic. It involves treating fabrics with alkali at an elevated temperature. This breaks down fatty acids on the fabric surface. There are two main scouring methods - kier boiling and scouring in a J-box. Kier boiling is a batch process where fabric is packed in a vessel and treated with hot alkali solution. Scouring in a J-box is a continuous process where fabric passes through different sections for impregnation, heating, and washing. The scouring process prepares fabrics for downstream wet processing like dyeing by removing oils and increasing absorbency.
What's hot (20)
Manufacturing process of textile industries (Printing and dyeing process of f...
Manufacturing process of textile industries (Printing and dyeing process of f...
Viewers also liked
Literate environment analysis ppt
I. The document summarizes Lynn Lanier's analysis of creating an effective literacy environment for young students.
II. Key aspects of the literacy environment discussed include getting to know learners through assessments, selecting engaging texts matched to students' levels, and implementing an interactive, critical, and response-based literacy framework.
III. Examples are provided of literacy lessons incorporating these perspectives, including using decoding strategies, comparing texts, and developing comprehension. Research supporting the approaches is also referenced.
The ‘Roundtable: Tourism on Human Rights’ (Europe) – how it began via Skype -...
A multi-stakeholder workshop on Responsible Tourism and Human Rights in Myanmar was held in Naypyidaw from 30 September to 2 October by the Myanmar Centre for Responsible Business and the Hanns Seidel Foundation.
Letterkenny Report_WomenMakingDifference_June 2013
This document summarizes discussions from a roundtable on women and institutional change. Key points included:
- Having more women in decision-making roles would bring expertise from collaborating and managing families, as well as provide a feminist perspective to challenge biases.
- Education needs to teach equality from an early age and make gender roles more flexible both in schools and at home.
- While progress has been made, politics and power imbalances remain male-dominated in Ireland. More support is needed for women in leadership.
- Community education programs have empowered women but more systemic change is still needed for gender equality.
Media Evaluation q1
This document discusses how the media product uses and challenges conventions of real music videos and album packaging. It summarizes the genres and conventions considered for the music video, including its narrative storyline. It also outlines the typical conventions followed for the digipak and poster, such as prominent images and information. The music video both uses conventions through its initial storyline matching the lyrics, but also challenges them by showing the artist exploring locations as the lyrics remain the same, developing the star image through varied shots of the artist.
Learn DC Assembled Education Presentation
This document discusses the development of the DC Statewide Longitudinal Education Data System (SLEDS) to create a central repository of education data in Washington DC. It outlines challenges with the previously fragmented data, the goals of making data accessible and linking it to action, and benefits like bolstering the education office's capabilities and improving data literacy in the community. A demo of the initial LearnDC.org website and API is presented, with plans to fully launch the public API in 2014.
Exposicion informatica
La tecnología puede facilitarnos la vida pero también alejarnos de las personas importantes, por lo que debemos aprender a usarla de manera que nos acerque a los demás en lugar de aislarnos.
Promoción 2013 ara !
Este documento lista los nombres de 8 estudiantes que fueron promovidos en 2013. Los nombres incluyen Mayra, Camila, Guadalupe, María, Mauricio, Ayelén y Rocío.
How does the Myanmar legal framework support company-community relations?
On 29 and 30 August PeaceNexus and MCRB convened a two day ‘collaborative design workshop’ at Inya Lake Hotel, Yangon to discuss the need for, and shape of, a possible initiative – or initiatives – to build capacity of civil society and business for dialogue and mediation of business-related conflicts.
MCRB presented on the existing Myanmar legal framework in support of company-community dialogue, and future opportunities including the potential for companies and communities to reach agreement on community development agreements/benefit sharing agreements which could cover a range of mutual interests and concerns.
Read more: http://www.myanmar-responsiblebusiness.org/news/peacenexus-collaborative-design-workshop.html
A busca por ideias inovadoras
O documento discute como ser inovador através do modelo MVS, que integra design e métodos ágeis como Lean Startup. O modelo sugere começar com um Produto Mínimo Viável ou Serviço Mínimo Valioso validado através de hipóteses, feedbacks e métricas. A abordagem centrada no ser humano do design thinking é defendida como essencial para criar soluções relevantes.
WMU PgDip Brochure 2016
The document provides information about several postgraduate diploma programs offered through distance learning by the World Maritime University (WMU). It describes a Postgraduate Diploma in Maritime Energy offered in partnership with Lloyd's Maritime Academy that consists of 5 modules covering topics related to energy management, efficiency, and alternative fuels in shipping. The 12-month program is coordinated by Professor Aykut I. Ölçer and costs £5,450/US$8,440.
Toothbrush
This document discusses effective communication strategies for promoting proper toothbrushing techniques. It notes that most people do not brush their teeth correctly and outlines the top 10 brushing mistakes. The solution proposed is to frame toothbrushing not as a task but as a daily ritual of relaxation that takes 2-3 minutes. Communicating this reframing through subtle messages on social media that emphasize relaxation rather than directives could help make toothbrushing a regular habit. The goal is to use 24 hours per year of relaxation time from brushing to promote the activity's benefits through habit formation rather than fear-based warnings or lists of tasks.
Smart's experience in anti corruption
On Tuesday, 23 September, MCRB hosted a half-day workshop on “Anti-Corruption Programmes” for Myanmar businesses in Yangon. The workshop, held in collaboration with Spectrum – a Yangon-based sustainable development knowledge network - was the first in a series of events to follow-up on the Transparency in Myanmar Enterprises (TiME) report and build business capacity in the area of anti-corruption and human rights.
Hyde Housing's Public Consultation document 9 April 2014
The proposal is for a new mixed-use development comprising 700 square meters of office space on the ground floor and 76 residential apartments above, replacing an existing two-story office building. The development will include private, affordable, and rental housing units of one to three bedrooms each with private outdoor space. There will be 35 underground parking spaces and a landscaped public space along Davigdor Road. The landscaping and building design aim to achieve sustainability standards through efficient construction, daylighting, potential renewable energy systems, and reduction of operating costs.
Monitor LED AOC - e2070Swn (2)
This document provides specifications for the AOC e2070Swn 20-inch LED monitor. Key details include:
- 20-inch LED-backlit screen with 1600x900 maximum resolution
- Wide viewing angles, 5ms response time, and 16.7 million colors
- Connectivity options of 15-pin D-sub analog input
- Complies with various industry regulations and has a VESA mounting compatible design
- Dimensions of 503x380x156mm and weighs under 5kg
Viewers also liked (16)
The ‘Roundtable: Tourism on Human Rights’ (Europe) – how it began via Skype -...
The ‘Roundtable: Tourism on Human Rights’ (Europe) – how it began via Skype -...
Letterkenny Report_WomenMakingDifference_June 2013
Letterkenny Report_WomenMakingDifference_June 2013
How does the Myanmar legal framework support company-community relations?
How does the Myanmar legal framework support company-community relations?
How companies respond to complaints and grievances (Burmese)
How companies respond to complaints and grievances (Burmese)
Hyde Housing's Public Consultation document 9 April 2014
Hyde Housing's Public Consultation document 9 April 2014
Similar to Desiccant dehumidifier -MDC6000 from Destech.eu
SUNTEC DSA technical data_sp1000c_2014
The document provides technical specifications for the SP1000/1000C swimming pool dehumidifier. It can remove up to 100L of moisture per day and has specially coated coils to prevent corrosion. It uses heat-pump technology with energy recovery and automatic hot-gas defrosting to operate effectively down to 1 degree Celsius. The unit dimensions are 890x260x750mm and it has a remote control, wall/floor mounting brackets, and removes moisture from areas up to 70 square meters.
Cool while saving even in humid climate areas
CAREL's Enrico Boscaro illustrates at ASHRAE Malaysia seminar the potentials of Indirect Evaporative Cooling technology as an energy savings instrument in cooling applications, in particular for the Make up Air handlers sector.
Ductless Fume Hood
PP Spray Fume Hood is a custom-made fume hood to diminish the residues of perchloric acid with an exhaust volume of 920m3 /h. The inside of the
deflector is fitted with a spray system that can neutralise the acid gas and then discharge it in the exhaust gas. The advance model features a
circulating pump, waterproof socket, water-gas remote control, PP sink and an LED display for convenient user operation.
Ductless Fume Hood
Ductless Fume Hood is configured with constant airflow technology to offer protection against airborne biological agents for ease of operation.
It features an exhaust volume of 630 m³/h working within airflow velocity of 0.3 to 0.8 m/s with low power consumption. Employed with transparent
side UV-resistant safety glass for perfect examination of the inside sample without any disturbance.
Walk-In Fume Hood
Walk-In Fume Hood is designed to protect sensitive biological applications against environmental pollution and cross-contamination by powder aerosol. Enhanced with
an external exhaust blower for fast and quick operation with low power consumption. It stimulates a 1150 m³/h exhaust volume that works within the airflow velocity
range between 0.3 to 0.8 m/s. A user-friendly control panel with an LCD screen allows intuitive operation for clear observation.
Polymer Processing Cost Saving Workshop - 05 Screw design and smart heat
SmartHeat is a new integrated barrel heating technology that offers improved process control, superior energy savings, and safer operation compared to traditional band heaters. It provides a uniform temperature profile for more consistent shots and reduces scrap. Testing shows it can improve temperature consistency by 55% and reduce energy usage by 30-60%. The plasma sprayed ceramic coating is maintenance-free and eliminates fire hazards from exposed wiring. Customers report paybacks of less than one year from reduced energy costs and improved productivity.
Aquasource membrane systems 2013 EN
Aquasource’s mission is to develop membrane systems and their processes for water treatment: drinking water production, process water production, desalination and reuse of traited wastewater.
Power Shaver Air Purification
The document describes Active Radiant Catalysis (ARC®) technology, which uses ultraviolet light and a multi-metal catalyst to generate oxidizing compounds like hydrogen peroxide from water vapor. These oxidants inactivate microbes like bacteria and viruses either by compromising their cell walls or changing their molecular structure. ARC® is implemented in various portable and permanent air purification products that are effective at reducing environmental pathogens in spaces up to 80,000 cubic feet.
Cat general hankison
This document describes Hankison's compressed air treatment solutions, including refrigerated air dryers, desiccant dryers, filters, mist eliminators, and condensate management products. Hankison has been providing innovative compressed air solutions since 1948 and maintains a reputation for superior performance, reliability, and energy savings. The document provides details on Hankison's various product lines and emphasizes excellence in design, manufacturing, and service.
Ductless Fume Hood
Ductless Fume Hood is configured with constant airflow technology to offer protection against airborne biological agents for ease of operation. It features an
exhaust volume of 630 m³/h working within airflow velocity of 0.3 to 0.8 m/s with low power consumption. Employed with transparent side UV-resistant safety glass
for perfect examination of the inside sample without any disturbance. Scratch-free high-quality stainless steel ensures corrosion resistance and long service life.
Ducted Fume Hood
Ducted Fume Hood combines cutting-edge carbon filtering technology with a sensor that detects filter saturation, offering a secure, high-performance solution.
It features an airflow velocity of 0.4 to 0.6 m/s, to offer excellent operator protection from dangerous particles. Enhanced with a microprocessor controller
that controls humidity and temperature to improve working conditions.
POWER PLANT ENGINEERING
The document describes the major components of a coal-based thermal power plant. It lists and briefly explains key parts like the coal handling plant, pulverizing plant, boiler, turbine and generator, condenser, cooling towers, and feedwater heaters. It also discusses coal and ash circuits, the air and gas circuit, and the feedwater and steam flow circuit. Site selection factors for thermal power stations and various systems used like coal handling, ash handling, draught systems, condensers, and feedwater treatment are summarized as well.
Novatek.Catalog Complete 2015
The document is a product catalog from Novatek that describes their equipment for industrial surface preparation and air filtration. It introduces their pledge to quality, durability, innovation, service, and partnerships. The catalog then provides details on their various product lines for surface preparation tools, contained blasting systems, air filtration machines, and accessories. It emphasizes Novatek's commitment to customers and providing equipment that will satisfy their needs for the long term.
Filtration Plants
Multi Star Filtration plants provide a modular, flexible and energy-efficient filtration system for a variety of industrial applications. The modular design allows configuration of the optimal plant size and filter elements for different air flow volumes and processes. Individual filter elements, explosion protection certification, and proven structural stability provide a reliable and cost-effective solution.
Fluid bed dryer
Tapasya Fluid Bed Dryers are the state of the art drying units comparable to any internationally made Fluid Bed Dryers, with all the features available. Our Fluid Bed Dryers are built with a working pressure of 3.0 Bar at 800c.
Fluid bed dryer
Tapasya Fluid bed dryer are the state of the art drying units comparable to any internationally made FBDs, with all the features available. Our FBDs are built with a working pressure of 3.0 Bar at 800c.
Fluid Bed Dryer - Tapasya Engineering
Tapasya FBDs are the state of the art drying units comparable to any internationally made FBDs, with all the features available.
Fluid bed dryer fbd (2)
The document describes Tapasya Engineering Works' fluid bed dryers (FBDs). Key points:
- The FBDs can dry materials at temperatures up to 800C and pressures up to 3.0 Bar.
- Tapasya's innovation team has enhanced the drying capacity of the FBDs by 18-20%, reducing drying time and improving product shelf life.
- The FBDs feature tri-level air filtration down to 0.3 microns and other specifications like proportional temperature control and explosion flaps for safety.
Fluid bed-dryer (1)
The document describes Tapasya Engineering Works' fluid bed dryers (FBDs). Key points:
- The FBDs are comparable to internationally made models and can operate at 800C with a 3 bar working pressure.
- Tapasya's innovation team has enhanced drying capabilities by 18-20%, reducing drying time and improving product shelf life.
- The machines feature tri-level air filtration, proportional temperature control, easy cleaning/maintenance, and safety measures like explosion flaps.
Paintbooth AutoOneIndia Call 09953353481
This document provides specifications for a paint booth, including details on its filter stages, dimensions, construction materials, electrical components, and technical parameters. The paint booth uses pre-filters, ceiling filters, and floor filters of varying materials and particle holding capacities. It has a positive pressure vertical down draft air flow of 22,000 cubic meters per hour. Components include inlet and exhaust blowers, a heat exchanger, burner, and control panel.
Similar to Desiccant dehumidifier -MDC6000 from Destech.eu (20)
Polymer Processing Cost Saving Workshop - 05 Screw design and smart heat
Polymer Processing Cost Saving Workshop - 05 Screw design and smart heat
Recently uploaded
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
Taking AI to the Next Level in Manufacturing.pdf
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
Skybuffer SAM4U tool for SAP license adoption
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays, June 2024 with Maria Copot 20
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
OpenID AuthZEN Interop Read Out - Authorization
During Identiverse 2024 and EIC 2024, members of the OpenID AuthZEN WG got together and demoed their authorization endpoints conforming to the AuthZEN API
Recently uploaded (20)
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
WeTestAthens: Postman's AI & Automation Techniques
WeTestAthens: Postman's AI & Automation Techniques
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
Desiccant dehumidifier -MDC6000 from Destech.eu
- 1. Desiccant Dehumidifier Manufacturing Company © 2012-2014 Desiccant Technologies Group
- 2. Desiccant dehumidifier MDC 6000
- 3. Technical Data : Process airflow – 6000 m³/h Dehumidification capacity (20ºC/60% RH) – 39 kg/h Power supply (3×400 V, 50 Hz) – 54.2 kW Weight – 950 kg
- 4. Desiccant dehumidifier MDC6000 designed for general purposes – 1.room air dehumidification and process drying. 2.Specially suitable for low temperature and low humidity operation. 3.Unit includes desiccant rotor, fans, filters, reactivation heaters and controls. 4.Casings are made of sheet steel with 40mm rock wool insulation, coated by powder painting.
- 5. For more information, Please Visit our website and get the best quality dehumidification.
- 8. Technical data: Process air Rated airflow 6000 m^3/h Available static pressure 400 Pа Reactivation air Rated airflow 1700 m^3/h Available static pressure 320 Pа Power supply (3х400V, 50 Hz) 56 kW Current 81 А Power supply (steam/water/gas reactivation) (3х400V, 50 Hz) 8 kW Current 12 А
- 9. Miscellaneous data Weight 860 kg Operating temperature - 30/+40˚С Max noise level without ductworks 70 dBA Air filter(pocket) EU4…EU9 IEC protective class IP55 Insulation 40mm