This document provides information about DONIT Tesnit, a company that produces gasket sheets and sealing solutions. It discusses DONIT's customer-centric approach and commitment to quality. The document presents several of DONIT's gasket sheet products - TESNIT BA-202, TESNIT BA-203, TESNIT BA-50, and TESNIT BA-55 - detailing their compositions, properties, dimensions, technical data, and applications. It emphasizes DONIT's focus on innovation through research and development as well as training programs for customers.
Clean Seal, Inc. is a manufacturer and distributor of automotive hoses and other rubber and plastic products located in South Bend, Indiana. They have a large climate-controlled warehouse to store their stock inventory and can ship products quickly. Clean Seal works with regulatory agencies to ensure their hoses meet changing emissions standards, and they offer a variety of hose products like fuel, AC, and engine cooling hoses to serve the automotive and other industries.
Clean Seal, Inc. is a manufacturer and distributor of extruded rubber and plastic products located in South Bend, Indiana that has been in business for over 35 years. They produce a wide range of stock and custom extruded profiles and molded parts for various industries. Clean Seal prides itself on its technical expertise, large inventory, fast shipping, and ISO certification. They can assist customers with product development and source competitively to provide high quality solutions.
Clean Seal, Inc. is a manufacturer and distributor of extruded rubber and plastic seals, springs, hose, molded products, and trim moldings located in South Bend, Indiana. Founded in 1978, Clean Seal serves hundreds of industries and prides itself on its technical expertise, large inventory, and ability to ship stock items quickly. Clean Seal focuses on continuous innovation and lean manufacturing to provide custom solutions and meet customers' sealing and insulation needs.
For years, Shandong Vibasia import and export company has gain great reputation in supplying industrial rubber and plastic products,Serving 10,500 customers and selling serial of industrial items.Located in Hebei,Our factory covers 100000 square meters and has 1,200 employees.
We are professional producer of PTFE,PVC,POM,HDPE,UHMWPE and Nylon products.We have many years of knowledge and experience in manufacturing and supplying plastic . During this time we have created a diverse, high quality product range of plastic solutions fitting to meet the needs of today's application demands.
To make ordering quick and easy,we employ friendly and experienced worker for international trading department.In addition ,we offer call service with Specifications of our products. Our foreign trading department proved we are serious with our customers time.
www.sdzytrade.en.alibaba.com continues to be the most popular way to shop rubber and plastic.Our website is all our rubber and plastic products including updated invention and mail space for any questions.
Vibasia is a different type of company,our founder placed 10% profit in a foundation that devoted to provide pure waters for third world countries children.
For more information about our mission or our company. Please visit www.sdzytrade.en.alibaba.com.
Huntsman Advanced Materials provides materials for the wind turbine industry, including composites, adhesives, and repair solutions. They have over 20 years of experience partnering with wind turbine manufacturers to develop reliable and cost-effective materials. Their product portfolio includes resins, hardeners, and adhesives for various composite manufacturing processes and turbine component bonding and repair. Huntsman supports customers through technical expertise, custom product development, and helping optimize manufacturing processes.
This document discusses various types of food grade hoses and pipes. It provides information on hoses of different lengths from 5m to 10m that are suitable for use in caravans, motorhomes, and boats. It also discusses longer coils of suction and discharge hoses for use in food manufacturing. The hoses and pipes discussed comply with European directives for materials that contact food and are resistant to chemicals commonly found in food processing.
Clean Seal Molded Specialties specializes in custom bumpers for docks/vehicles of all kinds. From backing your tractor trailer to a dock or your boat to a pier/dock. We have a custom or stock solution to suit your needs to protect your equipment and recreational vehicles.
Clean Seal, Inc. is a manufacturer and distributor of automotive hoses and other rubber and plastic products located in South Bend, Indiana. They have a large climate-controlled warehouse to store their stock inventory and can ship products quickly. Clean Seal works with regulatory agencies to ensure their hoses meet changing emissions standards, and they offer a variety of hose products like fuel, AC, and engine cooling hoses to serve the automotive and other industries.
Clean Seal, Inc. is a manufacturer and distributor of extruded rubber and plastic products located in South Bend, Indiana that has been in business for over 35 years. They produce a wide range of stock and custom extruded profiles and molded parts for various industries. Clean Seal prides itself on its technical expertise, large inventory, fast shipping, and ISO certification. They can assist customers with product development and source competitively to provide high quality solutions.
Clean Seal, Inc. is a manufacturer and distributor of extruded rubber and plastic seals, springs, hose, molded products, and trim moldings located in South Bend, Indiana. Founded in 1978, Clean Seal serves hundreds of industries and prides itself on its technical expertise, large inventory, and ability to ship stock items quickly. Clean Seal focuses on continuous innovation and lean manufacturing to provide custom solutions and meet customers' sealing and insulation needs.
For years, Shandong Vibasia import and export company has gain great reputation in supplying industrial rubber and plastic products,Serving 10,500 customers and selling serial of industrial items.Located in Hebei,Our factory covers 100000 square meters and has 1,200 employees.
We are professional producer of PTFE,PVC,POM,HDPE,UHMWPE and Nylon products.We have many years of knowledge and experience in manufacturing and supplying plastic . During this time we have created a diverse, high quality product range of plastic solutions fitting to meet the needs of today's application demands.
To make ordering quick and easy,we employ friendly and experienced worker for international trading department.In addition ,we offer call service with Specifications of our products. Our foreign trading department proved we are serious with our customers time.
www.sdzytrade.en.alibaba.com continues to be the most popular way to shop rubber and plastic.Our website is all our rubber and plastic products including updated invention and mail space for any questions.
Vibasia is a different type of company,our founder placed 10% profit in a foundation that devoted to provide pure waters for third world countries children.
For more information about our mission or our company. Please visit www.sdzytrade.en.alibaba.com.
Huntsman Advanced Materials provides materials for the wind turbine industry, including composites, adhesives, and repair solutions. They have over 20 years of experience partnering with wind turbine manufacturers to develop reliable and cost-effective materials. Their product portfolio includes resins, hardeners, and adhesives for various composite manufacturing processes and turbine component bonding and repair. Huntsman supports customers through technical expertise, custom product development, and helping optimize manufacturing processes.
This document discusses various types of food grade hoses and pipes. It provides information on hoses of different lengths from 5m to 10m that are suitable for use in caravans, motorhomes, and boats. It also discusses longer coils of suction and discharge hoses for use in food manufacturing. The hoses and pipes discussed comply with European directives for materials that contact food and are resistant to chemicals commonly found in food processing.
Clean Seal Molded Specialties specializes in custom bumpers for docks/vehicles of all kinds. From backing your tractor trailer to a dock or your boat to a pier/dock. We have a custom or stock solution to suit your needs to protect your equipment and recreational vehicles.
The document summarizes Klüberpaste UH1 96-402, a high-temperature paste for use in hygienically sensitive environments like the food and pharmaceutical industries. It provides reliable lubrication from 200°C to 1200°C, adheres well even in humid conditions, and is ISO 21469 certified. The paste contains synthetic oils and ceramic particles, works well across normal temperatures up to 160°C, and protects against corrosion at higher temperatures up to 1200°C. It is NSF H1 registered and FDA compliant for incidental food contact.
STABUTHERM GH 461 and 462 are high-temperature greases used for lubricating rolling bearings up to 180°C and in centralized lubrication systems up to 200°C. They provide benefits such as lower lubricant and waste disposal costs, reduced bearing costs, and trouble-free machine operation. The greases are mineral oil-based with a polyurea thickener, offer good wear protection and corrosion resistance, and can be pumped through common lubrication systems for applications such as rolling mills, continuous casting installations, and furnaces.
Clean Seal Springs (Clean Springs Division)cleanseal
Clean Seal, Inc. introduced Clean Spring back in 2013 as a unique custom metal springs manufacturer. This product offering went well with our existing lines of extruded seals and automotive hose. From compression to wave springs we can custom manufacturer you perfect spring for your application
Klüberplex BM 21-322 US is a lubricating grease designed for rolling and plain bearings operating in humid and aggressive environments. It provides excellent corrosion and wear protection, as well as resistance to water, water vapor, and diluted alkaline and acidic solutions. The grease can extend component life and is suitable for lubricating low to moderate speed bearings and for sealing valves and fittings. It has a mineral oil base and barium complex soap thickener.
New process fibre power point presentation 2012brust1960
New Process Fibre Company is a major supplier of stamped parts and extruded thermoplastic materials. They have over 80 years of experience producing parts for various industries. Their facility includes sheet extrusion equipment capable of producing nylon, acetyl, polyethylene, and polypropylene. They also have stamping presses and in-house toolmaking capabilities. New Process Fibre is committed to quality and customer service as evidenced by their ISO 9001 certification.
Drum closures drum flanges drum bungs drum cap seals plastic plugs supplierLynette Lian
Drum closures drum flanges drum bungs drum cap seals plastic plugs supplier from China Manufacturer . 2 inch and 3/4 inch steel drum closures ,drum cap seals either in plastic or metal . china drum closures gaskets manufacturers.drum bung and flange suppliers low price zinc plated drum closures,See more on www.qiminggroup.com
This document discusses Durlon gasket materials, including their wide range of applications, quality standards, and ability to reduce fugitive emissions. It provides details on Durlon's compressed non-asbestos and PTFE gasket materials, describing their properties, industries used in, and manufacturing quality controls. The document also discusses recommended flange finishes depending on the gasket type and how the flange finish can affect the gasket's ability to seal.
We at JGB Enterprises, Inc. take great care to ensure your product comes out tasting just as great as it did going in. JGB Enterprises supplies hoses and fittings that meet 3A, FDA and USDA standards for the pure transfer of solids and liquids. Dairy Delivery Hose and Dairy Hose Assemblies are for milk, beer, wine, distillery and beverage (edible liquid) transfer processing facilities; To Transfer of milk, juice, beer, soft drinks, pharmaceuticals, cosmetics or water-based products requiring an FDA sanitary hose. It is also suitable for many dry bulk products via suction, pneumatic or gravity where a sanitary hose is required. Dairy Delivery Hose are ideal for applications requiring flexible and/or tight bend connections. All hoses are FDA/USDA compliant & conforms to a 3-A Sanitary Standard.
One of our customers was faced with steam trap valve challenge. We are talking about saturated and superheated
steam at 46 bar and 400°C. Previous graphite gasket materials applied to the valve broke up during installation, as
they were instable and prone to friction movement. Pieces of remaining gasket had to be removed and seating of the
gasket to be cleaned.
This document provides information on various sintered wire cloth products from BOPP including Poremet, Absolta, Topmesh, and Poreflo. It describes the materials, layers, and manufacturing process for each product. It also details their applications in filtration and specifications including thickness, pore size, flow rate, and pressure resistance. Custom solutions can be developed to meet specific customer needs.
Westmoonint (HK) Corporation Limited produces several lines of powdered nitrile butadiene rubber. The PNBR 35 series is for plastic modification and includes three grades for uses like sealing strips and wire insulation. The PNBR 40 series is for friction materials and contains four grades used in brake pads and blocks. All grades are agglomerated into powder form and offer properties like oil and solvent resistance as well as toughness. The document provides specifications, characteristics, images and application instructions for each line and grade.
Celcon® m90 Material Certificates of Quick Connect FittingsAquafittings
Wisnex Aqua Fittings Co., Ltd, is a professional manufacturer of the plastic push fittings. All the materials are food rank, certificated by NSF, FDA, NSF etc, nontoxic, suitable for all kinds of drinking water systems.
iMovR Environmental Product Declaration, American Wood Councilworkwhilewalking
The document provides an environmental product declaration for medium density fiberboard (MDF) produced in North America. It summarizes the life cycle assessment results showing the environmental impacts from cradle-to-gate, including forest management, logging, sawmilling, transportation of wood residues to MDF plants, and MDF production. The declaration was developed by the American Wood Council and Canadian Wood Council in accordance with international standards and was verified by an independent third party.
Kl bertop TP 46-111 is a water-miscible, thermosetting bonded coating based on PTFE and an organic binder. It provides benefits such as a lubricating effect, lifetime resistance to wear under low to medium loads, and excellent corrosion protection on phosphated surfaces. The document describes the product's composition, applications, and application methods, and provides detailed test results on its properties including friction coefficient, corrosion and chemical resistance.
63586562 plastics-technology-handbook-volume-2-130816232757-phpapp01Muhammad Ahmad
This document provides a summary of the second volume of the Plastics Technology Handbook. It discusses various plastic manufacturing processes like coating, casting, reaction injection molding, rotational molding, compression molding, reinforced plastics, and other auxiliary processes. It also covers topics like mold and die tooling, material handling, decorating, and joining/assembling of plastic parts. The handbook is intended to provide a simplified and practical guide for professionals working with plastics.
Kl bertop TP 03-111 is a thermosetting bonded coating that provides cost savings and component performance benefits. It reduces friction and wear in metal/metal or metal/plastic contacts through its low friction coefficient and excellent resistance to chemicals, oils, and corrosion. The coating can be applied by immersion, spraying or brushing and once cured at 160C for 60 minutes, it achieves a long-lasting protective film between 7-15 micrometers thick.
Klübersynth HIP 84-401 is a white, synthetic grease that provides benefits for applications including thermally stable operation up to 180°C, longer service life, lower friction and operating temperatures, and noise dampening. It is suitable for plastic/plastic, plastic/metal, and metal/metal friction pairings subject to high loads, such as joints, gears, guide rails, and CV joints. The grease allows a pleasant switching feel, shows good plastics compatibility, and can be applied by various methods including brushes, guns, and cartridges.
The MC1XDZ mounting card is designed to host a DZCANTE-012L080 or DZRALTE-012L080 servo drive. It provides connections for power, signals, and communication and allows mounting of the drive. Key features include connectors for power, inputs/outputs, feedback, and communication via CAN or RS485. It is intended to conveniently interface the mounted drive.
This short document promotes creating presentations using Haiku Deck, a tool for making slideshows. It encourages the reader to get started making their own Haiku Deck presentation and sharing it on SlideShare. In just one sentence, it pitches the idea of using Haiku Deck to easily create engaging slideshow presentations.
This document discusses a mechanical systems and lighting course assignment. It provides details about the materials used to create a light fixture, including a glass globe, transparent tube, marble balls, bulb, and wiring. It explains the design process, mentioning sprinkling black on the globe and inserting marble balls into punctured metal. The document also notes that different light bulbs produce different lighting effects and that more efficient bulbs should be selected to save energy.
Este documento presenta una introducción a los conceptos básicos de bases de datos y sistemas de gestión de bases de datos. Explica brevemente la historia y evolución de las bases de datos, definiendo conceptos como datos, información y bases de datos. También describe los componentes de una base de datos, características de los sistemas de gestión de bases de datos y sus funciones. Finalmente, introduce los niveles de abstracción y funciones clave de un administrador de bases de datos.
The document summarizes Klüberpaste UH1 96-402, a high-temperature paste for use in hygienically sensitive environments like the food and pharmaceutical industries. It provides reliable lubrication from 200°C to 1200°C, adheres well even in humid conditions, and is ISO 21469 certified. The paste contains synthetic oils and ceramic particles, works well across normal temperatures up to 160°C, and protects against corrosion at higher temperatures up to 1200°C. It is NSF H1 registered and FDA compliant for incidental food contact.
STABUTHERM GH 461 and 462 are high-temperature greases used for lubricating rolling bearings up to 180°C and in centralized lubrication systems up to 200°C. They provide benefits such as lower lubricant and waste disposal costs, reduced bearing costs, and trouble-free machine operation. The greases are mineral oil-based with a polyurea thickener, offer good wear protection and corrosion resistance, and can be pumped through common lubrication systems for applications such as rolling mills, continuous casting installations, and furnaces.
Clean Seal Springs (Clean Springs Division)cleanseal
Clean Seal, Inc. introduced Clean Spring back in 2013 as a unique custom metal springs manufacturer. This product offering went well with our existing lines of extruded seals and automotive hose. From compression to wave springs we can custom manufacturer you perfect spring for your application
Klüberplex BM 21-322 US is a lubricating grease designed for rolling and plain bearings operating in humid and aggressive environments. It provides excellent corrosion and wear protection, as well as resistance to water, water vapor, and diluted alkaline and acidic solutions. The grease can extend component life and is suitable for lubricating low to moderate speed bearings and for sealing valves and fittings. It has a mineral oil base and barium complex soap thickener.
New process fibre power point presentation 2012brust1960
New Process Fibre Company is a major supplier of stamped parts and extruded thermoplastic materials. They have over 80 years of experience producing parts for various industries. Their facility includes sheet extrusion equipment capable of producing nylon, acetyl, polyethylene, and polypropylene. They also have stamping presses and in-house toolmaking capabilities. New Process Fibre is committed to quality and customer service as evidenced by their ISO 9001 certification.
Drum closures drum flanges drum bungs drum cap seals plastic plugs supplierLynette Lian
Drum closures drum flanges drum bungs drum cap seals plastic plugs supplier from China Manufacturer . 2 inch and 3/4 inch steel drum closures ,drum cap seals either in plastic or metal . china drum closures gaskets manufacturers.drum bung and flange suppliers low price zinc plated drum closures,See more on www.qiminggroup.com
This document discusses Durlon gasket materials, including their wide range of applications, quality standards, and ability to reduce fugitive emissions. It provides details on Durlon's compressed non-asbestos and PTFE gasket materials, describing their properties, industries used in, and manufacturing quality controls. The document also discusses recommended flange finishes depending on the gasket type and how the flange finish can affect the gasket's ability to seal.
We at JGB Enterprises, Inc. take great care to ensure your product comes out tasting just as great as it did going in. JGB Enterprises supplies hoses and fittings that meet 3A, FDA and USDA standards for the pure transfer of solids and liquids. Dairy Delivery Hose and Dairy Hose Assemblies are for milk, beer, wine, distillery and beverage (edible liquid) transfer processing facilities; To Transfer of milk, juice, beer, soft drinks, pharmaceuticals, cosmetics or water-based products requiring an FDA sanitary hose. It is also suitable for many dry bulk products via suction, pneumatic or gravity where a sanitary hose is required. Dairy Delivery Hose are ideal for applications requiring flexible and/or tight bend connections. All hoses are FDA/USDA compliant & conforms to a 3-A Sanitary Standard.
One of our customers was faced with steam trap valve challenge. We are talking about saturated and superheated
steam at 46 bar and 400°C. Previous graphite gasket materials applied to the valve broke up during installation, as
they were instable and prone to friction movement. Pieces of remaining gasket had to be removed and seating of the
gasket to be cleaned.
This document provides information on various sintered wire cloth products from BOPP including Poremet, Absolta, Topmesh, and Poreflo. It describes the materials, layers, and manufacturing process for each product. It also details their applications in filtration and specifications including thickness, pore size, flow rate, and pressure resistance. Custom solutions can be developed to meet specific customer needs.
Westmoonint (HK) Corporation Limited produces several lines of powdered nitrile butadiene rubber. The PNBR 35 series is for plastic modification and includes three grades for uses like sealing strips and wire insulation. The PNBR 40 series is for friction materials and contains four grades used in brake pads and blocks. All grades are agglomerated into powder form and offer properties like oil and solvent resistance as well as toughness. The document provides specifications, characteristics, images and application instructions for each line and grade.
Celcon® m90 Material Certificates of Quick Connect FittingsAquafittings
Wisnex Aqua Fittings Co., Ltd, is a professional manufacturer of the plastic push fittings. All the materials are food rank, certificated by NSF, FDA, NSF etc, nontoxic, suitable for all kinds of drinking water systems.
iMovR Environmental Product Declaration, American Wood Councilworkwhilewalking
The document provides an environmental product declaration for medium density fiberboard (MDF) produced in North America. It summarizes the life cycle assessment results showing the environmental impacts from cradle-to-gate, including forest management, logging, sawmilling, transportation of wood residues to MDF plants, and MDF production. The declaration was developed by the American Wood Council and Canadian Wood Council in accordance with international standards and was verified by an independent third party.
Kl bertop TP 46-111 is a water-miscible, thermosetting bonded coating based on PTFE and an organic binder. It provides benefits such as a lubricating effect, lifetime resistance to wear under low to medium loads, and excellent corrosion protection on phosphated surfaces. The document describes the product's composition, applications, and application methods, and provides detailed test results on its properties including friction coefficient, corrosion and chemical resistance.
63586562 plastics-technology-handbook-volume-2-130816232757-phpapp01Muhammad Ahmad
This document provides a summary of the second volume of the Plastics Technology Handbook. It discusses various plastic manufacturing processes like coating, casting, reaction injection molding, rotational molding, compression molding, reinforced plastics, and other auxiliary processes. It also covers topics like mold and die tooling, material handling, decorating, and joining/assembling of plastic parts. The handbook is intended to provide a simplified and practical guide for professionals working with plastics.
Kl bertop TP 03-111 is a thermosetting bonded coating that provides cost savings and component performance benefits. It reduces friction and wear in metal/metal or metal/plastic contacts through its low friction coefficient and excellent resistance to chemicals, oils, and corrosion. The coating can be applied by immersion, spraying or brushing and once cured at 160C for 60 minutes, it achieves a long-lasting protective film between 7-15 micrometers thick.
Klübersynth HIP 84-401 is a white, synthetic grease that provides benefits for applications including thermally stable operation up to 180°C, longer service life, lower friction and operating temperatures, and noise dampening. It is suitable for plastic/plastic, plastic/metal, and metal/metal friction pairings subject to high loads, such as joints, gears, guide rails, and CV joints. The grease allows a pleasant switching feel, shows good plastics compatibility, and can be applied by various methods including brushes, guns, and cartridges.
The MC1XDZ mounting card is designed to host a DZCANTE-012L080 or DZRALTE-012L080 servo drive. It provides connections for power, signals, and communication and allows mounting of the drive. Key features include connectors for power, inputs/outputs, feedback, and communication via CAN or RS485. It is intended to conveniently interface the mounted drive.
This short document promotes creating presentations using Haiku Deck, a tool for making slideshows. It encourages the reader to get started making their own Haiku Deck presentation and sharing it on SlideShare. In just one sentence, it pitches the idea of using Haiku Deck to easily create engaging slideshow presentations.
This document discusses a mechanical systems and lighting course assignment. It provides details about the materials used to create a light fixture, including a glass globe, transparent tube, marble balls, bulb, and wiring. It explains the design process, mentioning sprinkling black on the globe and inserting marble balls into punctured metal. The document also notes that different light bulbs produce different lighting effects and that more efficient bulbs should be selected to save energy.
Este documento presenta una introducción a los conceptos básicos de bases de datos y sistemas de gestión de bases de datos. Explica brevemente la historia y evolución de las bases de datos, definiendo conceptos como datos, información y bases de datos. También describe los componentes de una base de datos, características de los sistemas de gestión de bases de datos y sus funciones. Finalmente, introduce los niveles de abstracción y funciones clave de un administrador de bases de datos.
People Matter Website Relaunch Before and AfterRoy Harryman
People Matter helps people define, discover and deploy their unique fingerprint of potential. The website was a key component for reaching the public, providing resources and connecting people to the organization. However, its design had become dated and several functions had fallen into disrepair.
The MC1XDZR02 mounting card is designed to host DZR or DZXR series digital servo drives. It provides a compact assembly with accessible connectors and switches. The mounting card has connectors for signals, power, I/O, communication, feedback and motor power. It also has DIP switches for configuring the drive address, communication settings and termination.
The document discusses a door hinge gasket product called TESNIT that provides a waterproof seal for door hinges. TESNIT prevents door hinges from slipping and protects glass doors from damage, enabling reliable long-lasting use of all types of door hinges and fittings. It is made of cellulose fibers, inorganic fillers and NBR binder, giving it good mechanical and sealing properties for use in applications like the water supply industry up to temperatures of 180°C.
This document discusses adhesive bonding solutions from Huntsman for various assembly applications. It provides information on Huntsman's epoxy, polyurethane, and methacrylate adhesive products, including their properties, benefits, and suitable applications. These adhesives offer benefits over mechanical fastening like uniform stress distribution, fatigue resistance, design flexibility, and aesthetics. The document also emphasizes Huntsman's technical expertise, global presence, and ability to tailor solutions to customer needs.
Klübertop TM 06-111 is a thermosetting bonded coating based on molybdenum disulfide and an organic binding agent. It provides wear protection, corrosion protection, and low friction at high loads in corrosive environments. The coating can be applied by immersion, spraying, or brushing and adheres strongly to metal components for precision engineering, electrical engineering, automotive applications, and more. It cures within 30 minutes at room temperature or 180°C and offers a service life of over 150 meters under high load and corrosion testing conditions.
Klübertop TM 06-111 is a thermosetting bonded coating based on molybdenum disulfide and an organic binding agent. It provides wear protection, corrosion protection, and low friction at high loads in corrosive environments. The coating can be applied by immersion, spraying, or brushing and adheres strongly to metal components for precision engineering, electrical engineering, automotive applications, and more. It cures within 30 minutes at room temperature or 180°C and offers a service life of over 150 meters under high load and corrosion testing conditions.
This document provides information on various gasket materials produced by Donit Tesnit including Grafilit, Doniflon, Micalit, and Doniflex. Grafilit is an expanded natural graphite material with excellent chemical and thermal resistance. It is available in different compositions for varying operating pressures and temperatures. Doniflon is an expanded PTFE material suitable for most media across a wide pH range. Micalit contains mica flakes and resin for high thermal and chemical resistance. Doniflex materials have aramid fibers, graphite, and binders for good chemical and mechanical properties at elevated temperatures. Each material is designed for specific industries and has distinct properties, composition, and technical data.
LOCTITE® 5188TM is a one-part, acrylic-based anaerobic sealant that cures in the absence of air between close-fitting metal surfaces. It is designed for sealing rigid metal flanged connections, especially those exposed to minor oil contamination. It cures quickly and develops handling strength within 30 minutes, with full strength achieved after 72 hours. The sealant remains flexible even after exposure to high temperatures and has good adhesion to metals like steel and aluminum. It can seal gaps up to 0.25mm and resist pressures immediately after application while uncured.
DUOTEMPI PMY 45 is a light-colored lubricating paste for frictional connections subject to medium temperatures and pressures. It provides easy assembly and disassembly of interference fits while preventing fretting corrosion. The paste ensures reliable screw connections through adequate preload during assembly and increased component lifetime. It can be used for low-speed bearings, joints, bolts and other applications in automotive and industrial engineering where dry and moderate heat are present.
This document provides information on Kl bertop TP 41 N A-B, a two-component bonded coating for metal components. It has benefits such as a long component life expectancy from -40 to 230°C due to its flexible bonded coating of up to 70 μm thickness. It reduces friction and wear on metal and plastic pairings and provides lifetime lubrication and high resistance to wear. The document describes the product's composition, applications, instructions for mixing the two components, application process, and drying and hardening times.
This document describes Klüberquiet BQH 72-102, a synthetic high-temperature grease for lubricating rolling bearings. It offers benefits such as a long service life over 80°C, low noise, and a wide service temperature range. The grease combines high-temperature resistance with extreme purity due to its ester oil, polyurea thickener, and additives. It is suitable for lubricating ball bearings in applications like electric motors and power tools that experience extreme heat.
This technical data sheet provides information on Loctite 454, a cyanoacrylate adhesive. It is a one-part, thixotropic gel adhesive that cures rapidly with humidity. It can bond a variety of substrates including metals, plastics, elastomers, wood, leather, and fabrics. The gel consistency prevents run-off on vertical surfaces. Typical properties include a fixture time of less than one minute for many substrates and tensile strengths up to 15.1 MPa after curing for 72 hours. It also has good chemical and solvent resistance as well as heat resistance. Usage instructions and precautions are provided.
The document provides information about Porcher Industries, which develops and manufactures reinforcements for building and industrial applications. The key points are:
- Porcher Industries produces scrims, fabrics, and reinforcements for applications in building, flooring, waterproofing, filtration, insulation, and more.
- Their products require high levels of quality and meet stringent requirements. Porcher focuses on research and development to stay ahead of competition.
- They provide customized solutions and technical support to customers across various industries. Close cooperation with clients helps them provide leadership in the technical reinforcements market.
Klübertop TP 15-810 is a black, air-drying bonded coating based on PTFE and an organic binder that provides clean, dry wear protection without contamination from lubricants. It adheres firmly to surfaces, requires no heat setting, and offers lower costs than coatings requiring VOC filters or heating. Klübertop TP 15-810 reduces friction and wear while preventing stick-slip and corrosion.
Klübersynth HLR 46-371 is a high-temperature resistant lubricating grease for elastomer/metal combinations that are sensitive to mineral oil. It has a service temperature range of -40 to 150°C and is compatible with elastomers like EPDM and NBR as well as plastics. Testing showed the grease caused minimal changes in properties of elastomer samples over 168 hours at 100-150°C. The grease provides corrosion protection, water resistance, and oxidation stability and can be used in automotive components like brakes.
ISOFLEX TOPAS NCA 152 is a synthetic grease that provides good wear protection, resistance to oxidation and aging, and operates in a wide service temperature range from -40°C to 140°C. It is suitable for plain and rolling bearings in automotive and industrial applications like fans, pumps, and plastic components due to its low temperature properties and compatibility with various elastomers.
Bodycote coatings are used extensively in the Oil & Gas Industry. The centre schematic shows the types of components and where they're located within the industry structure.
This document describes BARRIERTA lubricants, which are high-quality, high-temperature lubricants based on perfluorinated polyether oil. BARRIERTA lubricants offer benefits such as excellent thermal stability, low evaporation rates, and compatibility with a wide range of plastics and elastomers. They are suitable for applications such as bearings, guides, electrical contacts, chains, and plastic-plastic friction points operating at extreme temperatures or in aggressive environments. The document provides information on product codes, properties, applications, and packaging of BARRIERTA's four viscosity grades.
This document describes BARRIERTA lubricants, which are high-quality, high-temperature lubricants based on perfluorinated polyether oil. BARRIERTA lubricants offer benefits such as excellent thermal stability, low evaporation rates, and compatibility with a wide range of plastics and elastomers. They are suitable for applications such as bearings, guides, electrical contacts, chains, and plastic-plastic friction points operating at extreme temperatures or in aggressive environments. The document provides information on product codes, properties, applications, and packaging of BARRIERTA lubricants.
Klübersynth LI 44-22 is a synthetic low-temperature grease that provides good damping properties. It is resistant to aging and has low friction coefficients. The grease is suitable for use in precision engineering and automotive applications such as automatic locking systems and seat adjustment systems. It is approved according to VW and Ford specifications and can be used with plastic and steel component pairings.
Walle produce all series of hydraulic seals,according to category by purpose,including rotary seals, all kinds of O ring(FKM O ring), step seal, glyd ring, oil seal and various of combination seals, gasket, spring energised seals, food machinery seals and so on.
Butyl mastic tapes and sealants for automotive vaccum bagging cable jointingNikhilMathew45
Butyl mastic tapes of high quality with custom sizes
Provided in strips and rolls of custom length and size
Used mainly in automotive , vacuum bagging for wind mills, cable jointing kits, roofing tapes, cladding tapes, water tank sealing, construction.
Good sealing, antitracking property, high quality rubber and additives for better performance.
Supplied all india and can be exported to almost all countries like italy, united states, canada, australia, japan.
www.centroidpolymer.com
Similar to DONIT_Gasket sheets_Brochure.compressed (20)
Butyl mastic tapes and sealants for automotive vaccum bagging cable jointing
DONIT_Gasket sheets_Brochure.compressed
1. We are a true
partner for
your success.
- p.1
Choose from a wide
variety of materials
to ensure the perfect
solution.
- p.2
Quality and
experience you
can rely on.
DONIT_Gasket sheets_Brochure2015.indd 1 1/20/15 11:55 AM
2. One company - two divisions:
DONIT Gasket Sheets and
DONIT Industrial Sealing Solutions
About DONIT Tesnit®
Sealing technologies
DONIT Tesnit®
is one of the leading gasket, gasket
sheet and sealing solution providers. We offer the best
solutions for all of your sealing challenges. This is
achieved through an understanding of our customer’s
needs, our high quality products, extensive know-how in
application engineering and customer driven innovation.
We are a true partner for your success.
Our customer centric approach is based on strong R&D,
and is supported by four pillars: experienced production
in the EU, quality and safety assurance, application
engineering and training.
Made in the EU with a presence in more than 65 countries supplying consistent quality to
the world.
Raw material
provider
Semi final
products
Distributors /
Agents
Cutters /
Gasket
producers
Retailers,
Resellers
End users
1
DONIT_Gasket sheets_Brochure2015.indd 2 1/20/15 11:55 AM
3. Certified quality
We assure high quality, environmentally friendly products
to our customers. Quality and care for the environment is
embedded in both our minds and our organization. We are
certified by international standards ISO 9001 and 14001.
We also ensure that product quality and safety is
in accordance with a number of widely recognized
international standards such as:
DVGW (DIN 3535-6, VP 401)
SVGW (DIN 3535-6)
DVGW KTW
DVGW W270
BAM
WRAS
TA-Luft (VDI 2440)
API 6FA / API 607
ABS
Germanischer Lloyd
DONIT
A perfect fit
DONIT gasket sheets and solutions are a high quality
product, certified by industry standards. Quality is our
foundation; improvement and innovation are our driving
force.
DONIT is a proactive partner that co-operates with
customers to both help develop their knowledge and to
offer the optimum high quality product and solution. Thus
we provide our customers with the peace of mind that
enables them to focus on their core business.
We constantly develop our products and services,
we innovate and above all, by offering the latest in
industry trends, we meet out customers’ concerns and
challenging requirements. Our goal is to provide reliable
and efficient solutions that enable our customers to
operate an environmentally safe business.
What can we do for you?
Products: Compressed non-asbestos sealing materials
(BA), engineered graphite sealing materials, flexible
graphite sealing materials and PTFE sealing materials.
Additional services: Training, R&D and application
engineering.
Industries: Pipeline systems, gas supply, steam supply,
potable water supply, shipbuilding, machine building,
chemical industry, refineries, power plants, valves,
pressure regulators, compressors, pumps.
2
DONIT_Gasket sheets_Brochure2015.indd 3 1/20/15 11:55 AM
4. Strong R&D, with a focus on innovation
Well-equipped, state of the art laboratories, multidisciplinary R&D teams and collaboration with external partners,
enables us to optimize sealing materials and gaskets to meet your most challenging needs.
Training for our customers
The DONIT Tesnit®
Authorized Training Centre delivers
intensive, interactive and case study driven education
programs to our customers. This training provides the detailed
knowledge utilised in the selection of the optimum gasket.
Day 1 - module 1: Sheet presentation
Day 2 - module 2: Gasket products, technology
and services offered
3
DONIT_Gasket sheets_Brochure2015.indd 4 1/20/15 11:55 AM
5. Products
DONIT Gasket Sheets
SHEETS BY PERFORMANCE
TESNIT®
DONIFLEX®
GRAFILIT®
DONIFLON
FIBER SHEETS FIBER REINFORCED
GRAPHITE SHEETS
GRAPHITE SHEETS PTFE SHEETS
* Suitable for agressive media.
600 °C
500 °C
400 °C
300 °C
200 °C
100 °C
TESNIT
BA-50
TESNIT
BA-U
TESNIT
BA-55
TESNITBA-CF
TESNITBA-GL
TESNITBA-R300/R302
DONIFLEX
GRAFILIT
MICALIT
TESNIT
BA-202
TESNIT
BA-203
DONIFLON*
MICALIT
HIGH TEMPERATURE
RESISTANT MATERIALS
4
DONIT_Gasket sheets_Brochure2015.indd 5 1/20/15 11:55 AM
6. TESNIT®
BA-202 is our standard gasket sheet, suitable for sealing applications at low operating conditions.
PROPERTIES
Composition
Organic fibers bonded with NBR.
Available with wire reinforcement on request.
Colour Pink / Red
Properties
Very good chemical resistance against gases, oils and
fuels. Also highly water resistant.
Appropriate industries
Pipeline systems, water supply industry, machine
building.
SURFACE TREATMENTS DIMENSIONS OF STANDARD SHEETS
Surface treatment is 2AS.
Other surface treatments including graphite and
PTFE are available on request.
Sheet size (mm): 1500 x 1500 | 3000 x 1500 | 4500 x 1500
Thickness (mm): 0.5 | 1.0 | 1.5 | 2.0 | 3.0
Other dimensions and thicknesses are available on request.
TECHNICAL DATA Typical values for a thickness of 2 mm
Density DIN 28090-2 g/cm3
1.8
Compressibility ASTM F36J % 9
Recovery ASTM F36J % 60
Tensile strength ASTM F152 MPa 8
Stress resistance DIN 52913
16 h, 50 MPa, 175 °C MPa 20
16 h, 50 MPa, 300 °C MPa /
Specific leak rate DIN 3535-6 mg/(s.m) 0.06
Thickness increase ASTM F146
Oil IRM 903, 5 h, 150 °C % 10
ASTM Fuel B, 5 h, 23 °C % 10
Compression modulus DIN 28090-2
At room temperature: εKSW
% /
At elevated temperature: εWSW/200 °C
% /
Percentage creep relaxation DIN 28090-2
At room temperature: εKRW
% /
At elevated temperature: εWRW/200 °C
% /
Max. operating conditions
Peak temperature °C/°F 180/356
Continuous temperature °C/°F 140/284
- with steam °C/°F 120/248
Pressure bar/psi 40/580
P-T DIAGRAM
EN 1514-1, Type IBC, PN 40, DIN 28091-2 / 3.8, 2.0 mm General suitability using common installation practices under the condition of chemical
compatibility.
Maximum performance is ensured through appropriate measures for joint design and gasket
installation. Consultation is recommended.
Limited application area. Technical consultation is mandatory.
Pressure - Temperature diagrams are the most current method for determining the suitability of
a gasket material in a known application. Maximum figures for temperature and pressure can be
misleading. Max. temperature and max. pressure represent maximum values and should not be
used simultaneously. They are given only for guidance, since these max. values depend not only
on the type of gasket material used but also on the assembly conditions. Please use the Pressure
- Temperature diagrams to check the suitability of the chosen gasket material for your application
(combination of pressure and temperature).
PRESSURE[bar]
TEMPERATURE [˚C]
0
10
20
30
40
50
-50 0 50 100 150 200
5
TESNIT®
BA-202
DONIT_Gasket sheets_Brochure2015.indd 6 1/20/15 11:55 AM
7. TESNIT®
BA-203 is a special gasket material based on aramid fibers and NBR rubber, suitable for lower to medium
operating conditions.
PROPERTIES
Composition
Aramid fibers bonded with NBR.
Available with wire reinforcement on request.
Colour Yellow
Properties Good resistance to water, gases, oils and fuels.
Appropriate industries Shipbuilding, water supply industry.
Approvals Germanischer Lloyd
SURFACE TREATMENTS DIMENSIONS OF STANDARD SHEETS
Surface treatment is 2AS.
Other surface treatments including graphite and
PTFE are available on request.
Sheet size (mm): 1500 x 1500 | 3000 x 1500 | 4500 x 1500
Thickness (mm): 0.5 | 1.0 | 1.5 | 2.0 | 3.0
Other dimensions and thicknesses are available on request.
TECHNICAL DATA Typical values for a thickness of 2 mm
Density DIN 28090-2 g/cm3
1.8
Compressibility ASTM F36J % 10
Recovery ASTM F36J % 60
Tensile strength ASTM F152 MPa 8
Stress resistance DIN 52913
16 h, 50 MPa, 175 °C MPa 25
16 h, 50 MPa, 300 °C MPa /
Specific leak rate DIN 3535-6 mg/(s.m) 0.08
Thickness increase ASTM F146
Oil IRM 903, 5 h, 150 °C % 8
ASTM Fuel B, 5 h, 23 °C % 10
Compression modulus DIN 28090-2
At room temperature: εKSW
% /
At elevated temperature: εWSW/200 °C
% /
Percentage creep relaxation DIN 28090-2
At room temperature: εKRW
% /
At elevated temperature: εWRW/200 °C
% /
Max. operating conditions
Peak temperature °C/°F 250/482
Continuous temperature °C/°F 200/392
- with steam °C/°F 160/320
Pressure bar/psi 50/725
6
General suitability using common installation practices under the condition of chemical
compatibility.
Maximum performance is ensured through appropriate measures for joint design and gasket
installation. Consultation is recommended.
Limited application area. Technical consultation is mandatory.
Pressure - Temperature diagrams are the most current method for determining the suitability of
a gasket material in a known application. Maximum figures for temperature and pressure can be
misleading. Max. temperature and max. pressure represent maximum values and should not be
used simultaneously. They are given only for guidance, since these max. values depend not only
on the type of gasket material used but also on the assembly conditions. Please use the Pressure
- Temperature diagrams to check the suitability of the chosen gasket material for your application
(combination of pressure and temperature).
TESNIT®
BA-203
P-T DIAGRAM
EN 1514-1, Type IBC, PN 40, DIN 28091-2 / 3.8, 2.0 mm
PRESSURE[bar]
TEMPERATURE [˚C]
0
10
20
30
40
50
60
-50 0 50 100 150 200
DONIT_Gasket sheets_Brochure2015.indd 7 1/20/15 11:55 AM
8. TESNIT®
BA-50 is a special gasket material suitable for general applications.
PROPERTIES
Composition
Aramid fibers bonded with NBR.
Available with wire reinforcement on request.
Colour Light green
Properties
Excellent chemical resistance and good dynamic
resistance. Good resistance to water, gases, fuels and
oils.
Appropriate industries
Gas supply, food industry, chemical industry, potable
water supply, shipbuilding.
Approvals
DIN-DVGW DIN 3535-6, DVGW KTW, Germanischer Lloyd,
TA-Luft (VDI 2440), WRAS, EC 1935/2004, DVGW W270
SURFACE TREATMENTS DIMENSIONS OF STANDARD SHEETS
Surface treatment is 4AS.
Other surface treatments including graphite and
PTFE are available on request.
Sheet size (mm): 1500 x 1500 | 3000 x 1500 | 4500 x 1500
Thickness (mm): 0.5 | 1.0 | 1.5 | 2.0 | 3.0
Other dimensions and thicknesses are available on request.
TECHNICAL DATA Typical values for a thickness of 2 mm
Density DIN 28090-2 g/cm3
1.8
Compressibility ASTM F36J % 8
Recovery ASTM F36J % 55
Tensile strength ASTM F152 MPa 11
Stress resistance DIN 52913
16 h, 50 MPa, 175 °C MPa 25
16 h, 50 MPa, 300 °C MPa /
Specific leak rate DIN 3535-6 mg/(s.m) 0.08
Thickness increase ASTM F146
Oil IRM 903, 5 h, 150 °C % 8
ASTM Fuel B, 5 h, 23 °C % 10
Compression modulus DIN 28090-2
At room temperature: εKSW
% /
At elevated temperature: εWSW/200 °C
% /
Percentage creep relaxation DIN 28090-2
At room temperature: εKRW
% /
At elevated temperature: εWRW/200 °C
% /
Max. operating conditions
Peak temperature °C/°F 280/536
Continuous temperature °C/°F 220/428
- with steam °C/°F 180/356
Pressure bar/psi 80/1160
7
TESNIT®
BA-50
P-T DIAGRAM
EN 1514-1, Type IBC, PN 40, DIN 28091-2 / 3.8, 2.0 mm
PRESSURE[bar]
TEMPERATURE [˚C]
0
10
20
30
40
50
60
70
80
90
-50 0 50 100 150 200 250
General suitability using common installation practices under the condition of chemical
compatibility.
Maximum performance is ensured through appropriate measures for joint design and gasket
installation. Consultation is recommended.
Limited application area. Technical consultation is mandatory.
Pressure - Temperature diagrams are the most current method for determining the suitability of
a gasket material in a known application. Maximum figures for temperature and pressure can be
misleading. Max. temperature and max. pressure represent maximum values and should not be
used simultaneously. They are given only for guidance, since these max. values depend not only
on the type of gasket material used but also on the assembly conditions. Please use the Pressure
- Temperature diagrams to check the suitability of the chosen gasket material for your application
(combination of pressure and temperature).
DONIT_Gasket sheets_Brochure2015.indd 8 1/20/15 11:55 AM
9. TESNIT®
BA-55 is a standard gasket material made of special synthetic fibers, which makes it very suitable for use with
higher thermal loads.
PROPERTIES
Composition
Special synthetic fibers bonded with NBR.
Available with wire reinforcement on request.
Colour Dark green
Properties
Excellent thermal properties and very good steam
resistance.
Appropriate industries
Potable water supply, gas supply, pumps, radiators,
steam supply.
Approvals
BAM (Oxygen), DIN-DVGW DIN 3535-6, DVGW KTW,
DVGW W270, DVGW VP 401, DVGW VP 401 (5 bar),
EC 1935/2004
SURFACE TREATMENTS DIMENSIONS OF STANDARD SHEETS
Surface treatment is 4AS.
Other surface treatments including graphite and
PTFE are available on request.
Sheet size (mm): 1500 x 1500 | 3000 x 1500 | 4500 x 1500
Thickness (mm): 0.5 | 1.0 | 1.5 | 2.0 | 3.0
Other dimensions and thicknesses are available on request.
TECHNICAL DATA Typical values for a thickness of 2 mm
Density DIN 28090-2 g/cm3
1.8
Compressibility ASTM F36J % 7
Recovery ASTM F36J % 55
Tensile strength ASTM F152 MPa 7
Stress resistance DIN 52913
16 h, 50 MPa, 175 °C MPa 35
16 h, 50 MPa, 300 °C MPa 30
Specific leak rate DIN 3535-6 mg/(s.m) 0.08
Thickness increase ASTM F146
Oil IRM 903, 5 h, 150 °C % 8
ASTM Fuel B, 5 h, 23 °C % 10
Compression modulus DIN 28090-2
At room temperature: εKSW
% 7.6
At elevated temperature: εWSW/200 °C
% 11.4
Percentage creep relaxation DIN 28090-2
At room temperature: εKRW
% 3.2
At elevated temperature: εWRW/200 °C
% 0.8
Max. operating conditions
Peak temperature °C/°F 350/662
Continuous temperature °C/°F 270/518
- with steam °C/°F 230/446
Pressure bar/psi 100/1450
8
General suitability using common installation practices under the condition of chemical
compatibility.
Maximum performance is ensured through appropriate measures for joint design and gasket
installation. Consultation is recommended.
Limited application area. Technical consultation is mandatory.
Pressure - Temperature diagrams are the most current method for determining the suitability of
a gasket material in a known application. Maximum figures for temperature and pressure can be
misleading. Max. temperature and max. pressure represent maximum values and should not be
used simultaneously. They are given only for guidance, since these max. values depend not only
on the type of gasket material used but also on the assembly conditions. Please use the Pressure
- Temperature diagrams to check the suitability of the chosen gasket material for your application
(combination of pressure and temperature).
TESNIT®
BA-55
P-T DIAGRAM
EN 1514-1, Type IBC, PN 40, DIN 28091-2 / 3.8, 2.0 mm
PRESSURE[bar]
TEMPERATURE [˚C]
0
20
40
60
80
100
-50 0 50 100 150 200 250 300
DONIT_Gasket sheets_Brochure2015.indd 9 1/20/15 11:55 AM
10. TESNIT®
BA-U is a general purpose gasket material which offers a solution for almost any need. BA-U is one of the most
approved gasket materials available on the market.
PROPERTIES
Composition
Aramid fibers bonded with NBR. Available with wire or
expanded steel reinforcement on request.
Colour Blue
Properties
Good chemical resistance, good mechanical and thermal
properties and low gas permeability.
Appropriate industries
Food industry, gas supply, potable water supply,
compressors, pumps, general purpose usage.
Approvals
BAM (Oxygen), DIN-DVGW DIN 3535-6,
SVGW DIN 3535-6, DVGW VP 401, DVGW KTW,
DVGW W270, TA-Luft (VDI 2440), WRAS, Germanischer
Lloyd, ABS, EC 1935/2004, AGA 8140 G (Class III)
SURFACE TREATMENTS DIMENSIONS OF STANDARD SHEETS
Surface treatment is 4AS.
Other surface treatments including graphite and
PTFE are available on request.
Sheet size (mm): 1500 x 1500 | 3000 x 1500 | 4500 x 1500
Thickness (mm): 0.5 | 1.0 | 1.5 | 2.0 | 3.0
Other dimensions and thicknesses are available on request.
TECHNICAL DATA Typical values for a thickness of 2 mm
Density DIN 28090-2 g/cm3
1.7
Compressibility ASTM F36J % 11
Recovery ASTM F36J % 60
Tensile strength ASTM F152 MPa 10
Stress resistance DIN 52913
16 h, 50 MPa, 175 °C MPa 27
16 h, 50 MPa, 300 °C MPa 23
Specific leak rate DIN 3535-6 mg/(s.m) 0.05
Thickness increase ASTM F146
Oil IRM 903, 5 h, 150 °C % 2
ASTM Fuel B, 5 h, 23 °C % 5
Compression modulus DIN 28090-2
At room temperature: εKSW
% 9.5
At elevated temperature: εWSW/200 °C
% 16.1
Percentage creep relaxation DIN 28090-2
At room temperature: εKRW
% 4.7
At elevated temperature: εWRW/200 °C
% 0.8
Max. operating conditions
Peak temperature °C/°F 350/662
Continuous temperature °C/°F 250/482
- with steam °C/°F 200/392
Pressure bar/psi 100/1450
TESNIT®
BA-U
P-T DIAGRAM
EN 1514-1, Type IBC, PN 40, DIN 28091-2 / 3.8, 2.0 mm
PRESSURE[bar]
TEMPERATURE [˚C]
0
20
40
60
80
100
-50 0 50 100 150 200 250
General suitability using common installation practices under the condition of chemical
compatibility.
Maximum performance is ensured through appropriate measures for joint design and gasket
installation. Consultation is recommended.
Limited application area. Technical consultation is mandatory.
Pressure - Temperature diagrams are the most current method for determining the suitability of
a gasket material in a known application. Maximum figures for temperature and pressure can be
misleading. Max. temperature and max. pressure represent maximum values and should not be
used simultaneously. They are given only for guidance, since these max. values depend not only
on the type of gasket material used but also on the assembly conditions. Please use the Pressure
- Temperature diagrams to check the suitability of the chosen gasket material for your application
(combination of pressure and temperature).
9
DONIT_Gasket sheets_Brochure2015.indd 10 1/20/15 11:55 AM
11. TESNIT®
BA-CF is a soft, high grade carbon fiber gasket material and is the answer to the growing demands of
aggressive chemical and higher thermal loads.
PROPERTIES
Composition
Carbon fibers bonded with NBR. Available with wire or
expanded steel reinforcement on request.
Colour Black
Properties
Excellent resistance to steam and strong alkaline
media.
Appropriate industries Chemical industry, petrochemicals, steam supply.
Approvals
BAM (Oxygen), DIN-DVGW DIN 3535-6, DVGW VP 401,
DVGW KTW, Germanischer Lloyd
SURFACE TREATMENTS DIMENSIONS OF STANDARD SHEETS
Surface treatment is 4AS.
Other surface treatments including graphite and
PTFE are available on request.
Sheet size (mm): 1500 x 1500 | 3000 x 1500 | 4500 x 1500
Thickness (mm): 0.5 | 1.0 | 1.5 | 2.0 | 3.0
Other dimensions and thicknesses are available on request.
TECHNICAL DATA Typical values for a thickness of 2 mm
Density DIN 28090-2 g/cm3
1.7
Compressibility ASTM F36J % 9
Recovery ASTM F36J % 60
Tensile strength ASTM F152 MPa 12
Stress resistance DIN 52913
16 h, 50 MPa, 175 °C MPa 35
16 h, 50 MPa, 300 °C MPa 30
Specific leak rate DIN 3535-6 mg/(s.m) 0.1
Thickness increase ASTM F146
Oil IRM 903, 5 h, 150 °C % 5
ASTM Fuel B, 5 h, 23 °C % 5
Compression modulus DIN 28090-2
At room temperature: εKSW
% 7.3
At elevated temperature: εWSW/200 °C
% 8.3
Percentage creep relaxation DIN 28090-2
At room temperature: εKRW
% 3.6
At elevated temperature: εWRW/200 °C
% 1.0
Max. operating conditions
Peak temperature °C/°F 400/752
Continuous temperature °C/°F 300/572
- with steam °C/°F 280/536
Pressure bar/psi 100/1450
10
TESNIT®
BA-CF
General suitability using common installation practices under the condition of chemical
compatibility.
Maximum performance is ensured through appropriate measures for joint design and gasket
installation. Consultation is recommended.
Limited application area. Technical consultation is mandatory.
Pressure - Temperature diagrams are the most current method for determining the suitability of
a gasket material in a known application. Maximum figures for temperature and pressure can be
misleading. Max. temperature and max. pressure represent maximum values and should not be
used simultaneously. They are given only for guidance, since these max. values depend not only
on the type of gasket material used but also on the assembly conditions. Please use the Pressure
- Temperature diagrams to check the suitability of the chosen gasket material for your application
(combination of pressure and temperature).
P-T DIAGRAM
EN 1514-1, Type IBC, PN 40, DIN 28091-2 / 3.8, 2.0 mm
PRESSURE[bar]
TEMPERATURE [˚C]
0
50
100
150
-50 0 50 100 150 200 250 300 350
DONIT_Gasket sheets_Brochure2015.indd 11 1/20/15 11:55 AM
12. 11
TESNIT®
BA-M is an environmentally friendly gasket material recommended for all applications where thermal cycling is
involved and offers excellent torque retention along with long term stability, low maintenance costs and high reliability.
PROPERTIES
Composition
Aramid and engineered mineral fibers bonded with NBR.
Available with wire or expanded steel reinforcement on
request.
Colour Grey / Green
Properties
Excellent resistance to steam, oils, fuels, gases, freons,
solvents, non-aggressive chemicals, hot water and other
substances.
Appropriate industries
Heat exchangers, boilers, radiators, steam supply,
power plants.
Approvals
BAM (Oxygen), DIN-DVGW DIN 3535-6, DVGW VP 401,
DVGW KTW, TA-Luft (VDI 2440), WRAS, EC 1935/2004
SURFACE TREATMENTS DIMENSIONS OF STANDARD SHEETS
Surface treatment is 4AS.
Other surface treatments including graphite and
PTFE are available on request.
Sheet size (mm): 1500 x 1500 | 3000 x 1500 | 4500 x 1500
Thickness (mm): 0.5 | 1.0 | 1.5 | 2.0 | 3.0
Other dimensions and thicknesses are available on request.
TECHNICAL DATA Typical values for a thickness of 2 mm
Density DIN 28090-2 g/cm3
1.7
Compressibility ASTM F36J % 10
Recovery ASTM F36J % 60
Tensile strength ASTM F152 MPa 13
Stress resistance DIN 52913
16 h, 50 MPa, 175 °C MPa 35
16 h, 50 MPa, 300 °C MPa 27
Specific leak rate DIN 3535-6 mg/(s.m) 0.05
Thickness increase ASTM F146
Oil IRM 903, 5 h, 150 °C % 5
ASTM Fuel B, 5 h, 23 °C % 6
Compression modulus DIN 28090-2
At room temperature: εKSW
% 10.8
At elevated temperature: εWSW/200 °C
% 11.0
Percentage creep relaxation DIN 28090-2
At room temperature: εKRW
% 4.1
At elevated temperature: εWRW/200 °C
% 0.8
Max. operating conditions
Peak temperature °C/°F 440/824
Continuous temperature °C/°F 350/662
- with steam °C/°F 300/572
Pressure bar/psi 120/1740
TESNIT®
BA-M
General suitability using common installation practices under the condition of chemical
compatibility.
Maximum performance is ensured through appropriate measures for joint design and gasket
installation. Consultation is recommended.
Limited application area. Technical consultation is mandatory.
Pressure - Temperature diagrams are the most current method for determining the suitability of
a gasket material in a known application. Maximum figures for temperature and pressure can be
misleading. Max. temperature and max. pressure represent maximum values and should not be
used simultaneously. They are given only for guidance, since these max. values depend not only
on the type of gasket material used but also on the assembly conditions. Please use the Pressure
- Temperature diagrams to check the suitability of the chosen gasket material for your application
(combination of pressure and temperature).
P-T DIAGRAM
EN 1514-1, Type IBC, PN 40, DIN 28091-2 / 3.8, 2.0 mm
PRESSURE[bar]
TEMPERATURE [˚C]
0
50
100
150
-50 0 50 100 150 200 250 300 350
DONIT_Gasket sheets_Brochure2015.indd 12 1/20/15 11:55 AM
13. 12
TESNIT®
BA-GL is an excellent soft gasket material composed of selected glass fibers, suitable for sealing of a broad
range of joints at high temperatures.
PROPERTIES
Composition
Glass fibers bonded with NBR. Available with wire or
expanded steel reinforcement on request.
Colour Green
Properties
Superior torque retention and good steam resistance.
Excellent thermal resistance in combination with low gas
permeability.
Appropriate industries
Steam supply, potable water supply, gas supply,
shipbuilding, power plants.
Approvals
DIN-DVGW DIN 3535-6, DVGW VP 401, DVGW KTW,
BAM (Oxygen), WRAS, TA-Luft (VDI 2440), API 607,
Germanischer Lloyd, EC 1935/2004
SURFACE TREATMENTS DIMENSIONS OF STANDARD SHEETS
Surface treatment is 4AS.
Other surface treatments including graphite and
PTFE are available on request.
Sheet size (mm): 1500 x 1500 | 3000 x 1500 | 4500 x 1500
Thickness (mm): 0.5 | 1.0 | 1.5 | 2.0 | 3.0
Other dimensions and thicknesses are available on request.
TECHNICAL DATA Typical values for a thickness of 2 mm
Density DIN 28090-2 g/cm3
1.8
Compressibility ASTM F36J % 7
Recovery ASTM F36J % 55
Tensile strength ASTM F152 MPa 11
Stress resistance DIN 52913
16 h, 50 MPa, 175 °C MPa 38
16 h, 50 MPa, 300 °C MPa 33
Specific leak rate DIN 3535-6 mg/(s.m) 0.03
Thickness increase ASTM F146
Oil IRM 903, 5 h, 150 °C % 3
ASTM Fuel B, 5 h, 23 °C % 5
Compression modulus DIN 28090-2
At room temperature: εKSW
% 6.9
At elevated temperature: εWSW/200 °C
% 7.9
Percentage creep relaxation DIN 28090-2
At room temperature: εKRW
% 3.3
At elevated temperature: εWRW/200 °C
% 1.2
Max. operating conditions
Peak temperature °C/°F 440/824
Continuous temperature °C/°F 350/662
- with steam °C/°F 250/482
Pressure bar/psi 120/1740
TESNIT®
BA-GL
P-T DIAGRAM
EN 1514-1, Type IBC, PN 40, DIN 28091-2 / 3.8, 2.0 mm
PRESSURE[bar]
TEMPERATURE [˚C]
0
50
100
150
-50 0 50 100 150 200 250 300 350
General suitability using common installation practices under the condition of chemical
compatibility.
Maximum performance is ensured through appropriate measures for joint design and gasket
installation. Consultation is recommended.
Limited application area. Technical consultation is mandatory.
Pressure - Temperature diagrams are the most current method for determining the suitability of
a gasket material in a known application. Maximum figures for temperature and pressure can be
misleading. Max. temperature and max. pressure represent maximum values and should not be
used simultaneously. They are given only for guidance, since these max. values depend not only
on the type of gasket material used but also on the assembly conditions. Please use the Pressure
- Temperature diagrams to check the suitability of the chosen gasket material for your application
(combination of pressure and temperature).
DONIT_Gasket sheets_Brochure2015.indd 13 1/20/15 11:55 AM
14. TESNIT®
BA-R is a soft gasket material with a special type of wire reinforcement, utilised in many applications with high
thermal and mechanical service conditions.
PROPERTIES
Composition Aramid fibers bonded with NBR, wire reinforcement.
Colour Black
Properties
Excellent mechanical, dynamic and thermal resistance
and blow-out safety.
Appropriate industries Automotive industry, petrochemicals, shipbuilding.
Approvals Germanischer Lloyd, BAM (Oxygen)
SURFACE TREATMENTS DIMENSIONS OF STANDARD SHEETS
Surface treatment is 2G. Sheet size (mm): 1000 x 1500 | 1500 x 1500
Thickness (mm): 1.0 | 1.5 | 2.0 | 3.0
Other dimensions and thicknesses are available on request.
TECHNICAL DATA Typical values for a thickess of 2 mm
Density DIN 28090-2 g/cm3
2.0
Compressibility ASTM F36J % 8
Recovery ASTM F36J % 55
Tensile strength ASTM F152 MPa 17
Stress resistance DIN 52913
16 h, 50 MPa, 175 °C MPa 30
16 h, 50 MPa, 300 °C MPa 25
Specific leak rate DIN 3535-6 mg/(s.m) /
Thickness increase ASTM F146
Oil IRM 903, 5 h, 150 °C % 8
ASTM Fuel B, 5 h, 23 °C % /
Compression modulus DIN 28090-2
At room temperature: εKSW
% /
At elevated temperature: εWSW/200 °C
% /
Percentage creep relaxation DIN 28090-2
At room temperature: εKRW
% /
At elevated temperature: εWRW/200 °C
% /
Max. operating conditions
Peak temperature °C/°F 400/752
Continuous temperature °C/°F 350/662
Pressure bar/psi 140/2030
13
TESNIT®
BA-R
P-T DIAGRAM
EN 1514-1, Type IBC, PN 40, DIN 28091-2 / 3.8, 2.0 mm
PRESSURE[bar]
TEMPERATURE [˚C]
0
20
40
60
80
100
120
140
-50 0 50 100 150 200 250
General suitability using common installation practices under the condition of chemical
compatibility.
Maximum performance is ensured through appropriate measures for joint design and gasket
installation. Consultation is recommended.
Limited application area. Technical consultation is mandatory.
Pressure - Temperature diagrams are the most current method for determining the suitability of
a gasket material in a known application. Maximum figures for temperature and pressure can be
misleading. Max. temperature and max. pressure represent maximum values and should not be
used simultaneously. They are given only for guidance, since these max. values depend not only
on the type of gasket material used but also on the assembly conditions. Please use the Pressure
- Temperature diagrams to check the suitability of the chosen gasket material for your application
(combination of pressure and temperature).
DONIT_Gasket sheets_Brochure2015.indd 14 1/20/15 11:55 AM
15. TESNIT®
BA-REM is a reinforced gasket material for use in highly demanding applications. It has excellent sealing and
outstanding thermo-mechanical properties.
PROPERTIES
Composition
A balanced mixture of fibers. Available with wire or
expanded steel reinforcement on request.
Colour Green
Properties
This material combines a high blow-out resistance with
very high pressure, temperature and surface stress
resistance. Whilst at the same time maintaining a high
torque retention with good chemical resistance.
Appropriate industries Gas supply, steam supply, power plants.
SURFACE TREATMENTS DIMENSIONS OF STANDARD SHEETS
Surface treatment is 4AS.
Other surface treatments including graphite and
PTFE are available on request.
Sheet size (mm): 1000 x 1500 | 1500 x 1500
Thickness (mm): 1.0 | 1.5 | 2.0 | 3.0
Other dimensions and thicknesses are available on request.
TECHNICAL DATA Typical values for a thickness of 1.5 mm
Density DIN 28090-2 g/cm3
2.2
Compressibility ASTM F36J % 7
Recovery ASTM F36J % 50
Tensile strength ASTM F152 MPa 35
Stress resistance DIN 52913
16 h, 50 MPa, 175 °C MPa 43
16 h, 50 MPa, 300 °C MPa 38
Specific leak rate DIN 3535-6 mg/(s.m) 0.05
Thickness increase ASTM F146
Oil IRM 903, 5 h, 150 °C % 5
ASTM Fuel B, 5 h, 23 °C % 8
Compression modulus DIN 28090-2
At room temperature: εKSW
% 6.5
At elevated temperature: εWSW/200 °C
% 5.8
Percentage creep relaxation DIN 28090-2
At room temperature: εKRW
% 3.2
At elevated temperature: εWRW/200 °C
% 0.5
Max. operating conditions
Peak temperature °C/°F 460/860
Continuous temperature °C/°F 370/698
- with steam °C/°F 250/482
Pressure bar/psi 150/2175
14
TESNIT®
BA-REM
DONIT_Gasket sheets_Brochure2015.indd 15 1/20/15 11:55 AM
16. TESNIT®
BA-R300 is a specially designed gasket material reinforced by an extremely strong wire mesh, offering
outstanding dynamic and thermal properties.
PROPERTIES
Composition
Inorganic fibers, NBR bonded with a strong wire mesh
reinforcement.
Colour Black
Properties Extreme dynamic and thermal resistance.
Appropriate industries Automotive industry, petrochemicals, shipbuilding.
Approvals Germanischer Lloyd
SURFACE TREATMENTS DIMENSIONS OF STANDARD SHEETS
Surface treatment is 2G. Sheet size (mm): 500 x 1400 | 1000 x 1400
Thickness (mm): 0.7 | 1.0 | 1.2 | 1.4 | 2.0 | 2.5 | 3.0
Other dimensions and thicknesses are available on
request.
TECHNICAL DATA Typical values for a thickness of 2 mm
Density DIN 28090-2 g/cm3
3.2
Compressibility ASTM F36J % 10
Recovery ASTM F36J % 40
Tensile strength ASTM F152 MPa /
Stress resistance DIN 52913
16 h, 50 MPa, 175 °C MPa 46
16 h, 50 MPa, 300 °C MPa 40
Specific leak rate DIN 3535-6 mg/(s.m) /
Thickness increase ASTM F146
Oil IRM 903, 5 h, 150 °C % 5
ASTM Fuel B, 5 h, 23 °C % /
Compression modulus DIN 28090-2
At room temperature: εKSW
% /
At elevated temperature: εWSW/200 °C
% /
Percentage creep relaxation DIN 28090-2
At room temperature: εKRW
% /
At elevated temperature: εWRW/200 °C
% /
Max. operating conditions
Peak temperature °C/°F 550/1022
Continuous temperature °C/°F 450/842
15
TESNIT®
BA-R300
DONIT_Gasket sheets_Brochure2015.indd 16 1/20/15 11:55 AM
17. TESNIT®
BA-R302 is a further development of the reinforced gasket with an extreme reinforcement assuring superior
thermo-mechanical properties. It was designed for even the most demanding applications.
PROPERTIES
Composition
Inorganic fibers, NBR bonded with a strong wire mesh
reinforcement.
Colour Black
Properties
Superior dynamic and thermal resistance. Excellent
blow-out safety.
Appropriate industries Automotive industry, petrochemicals, shipbuilding.
Approvals Germanischer Lloyd
SURFACE TREATMENTS DIMENSIONS OF STANDARD SHEETS
Surface treatment is 2G. Sheet size (mm): 500 x 1400
Thickness (mm): 1.4 | 1.6
Other dimensions and thicknesses are available on
request.
TECHNICAL DATA Typical values for a thickness of 2 mm
Density DIN 28090-2 g/cm3
3.7
Compressibility ASTM F36J % 8
Recovery ASTM F36J % 45
Tensile strength ASTM F152 MPa /
Stress resistance DIN 52913
16 h, 50 MPa, 175 °C MPa 48
16 h, 50 MPa, 300 °C MPa 45
Specific leak rate DIN 3535-6 mg/(s.m) /
Thickness increase ASTM F146
Oil IRM 903, 5 h, 150 °C % 5
ASTM Fuel B, 5 h, 23 °C % /
Compression modulus DIN 28090-2
At room temperature: εKSW
% /
At elevated temperature: εWSW/200 °C
% /
Percentage creep relaxation DIN 28090-2
At room temperature: εKRW
% /
At elevated temperature: εWRW/200 °C
% /
Max. operating conditions
Peak temperature °C/°F 650/1202
Continuous temperature °C/°F 600/1112
16
TESNIT®
BA-R302
DONIT_Gasket sheets_Brochure2015.indd 17 1/20/15 11:55 AM
18. Chemical resistance chart for focus products
The recommendations made here are intended to be a guideline for the selection of the
suitable gasket quality. Because the function and durability of the products depend upon
a number of factors, the data may not be used to support any warranty claims.
Recommended
Recommendation depends on operating conditions
Not recommended
All information, and data quoted are based on years of experience in production and operation of sealing elements.
The data may not, be used to support any warranty claims.This edition cancels all previous issues, and is a subject
to change without further notice.
BA-202
BA-203
BA-50
BA-55
BA-U
BA-CF
BA-GL
BA-M
BA-R
BA-REM
Acetamide
Acetic acid 10%
Acetic acid 100%
Acetic ester
Acetone
Acetylene
Adipic acid
Air
Alum
Aluminium acetate
Aluminium chlorate
Aluminium chloride
Ammonia
Ammonium bicarbonate
Ammonium chloride
Ammonium hydroxide
Amyl acetate
Aniline
Asphalt
Barium chloride
Benzene
Benzoic acid
Boric acid
Borax
Butane
Butyl alcohol
Butyric acid
Calcium chloride
Calcium hydroxide
Carbon dioxide
Chloroform
Chlorine, dry
Chlorine, wet
Chromic acid
Citric acid
Copper acetate
Creosote
Cresol
Cyclohexanol
Cyclohexanone
Decalin
Dibenzyl ether
Dimethyl formamide
Dowtherm
Ethane
Ethyl acetate
Ethyl alcohol
Ethyl chloride
Ethylene
Ethylene glycol
Formic acid 10%
Formic acid 85%
Formaldehyde
Freon 12
Freon 22
Fuel oil
Gasoline
Glycerine
Heptane
Hydraulic oil (Mineral)
Hydraulic oil (Phosphate ester type)
Hydraulic oil (Glycol based)
Hydrazine
Hydrochloric acid 20%
Hydrochloric acid 36%
Hydrofluoric acid 10%
Hydrofluoric acid 40%
Hydrogen
BA-202
BA-203
BA-50
BA-55
BA-U
BA-CF
BA-GL
BA-M
BA-R
BA-REM
Isobutane
Isooctane
Isopropyl alcohol
Kerosene
Lead acetate
Lead arsenate
Magnesium sulphate
Malic acid
Methane
Methanol
Methyl chloride
Methylene dichloride
Methyl ethyl ketone
Milk
Mineral oil type ASTM no.1
Naphtha
Nitric acid 20%
Nitric acid 40%
Nitric acid 96%
Nitrobenzene
Nitrogen
Octane
Oleic acid
Oleum
Oxalic acid
Oxygen
Palmitic acid
Pentane
Perchloroethylene
Phenol
Phosphoric acid
Potassium acetate
Potassium bicarbonate
Potassium carbonate
Potassium chloride
Potassium dichromate
Potassium hydroxide
Potassium iodide
Potassium nitrate
Potassium permanganate
Propane
Pyridine
R 134a
Salicylic acid
Silicone acid
Soap
Sodium aluminate
Sodium bicarbonate
Sodium bisulphite
Sodium carbonate
Sodium chloride
Sodium cyanide
Sodium hydroxide
Sodium sulphate
Sodium sulphide
Starch
Steam
Stearic acid
Sugar
Sulphuric acid 20%
Sulphuric acid 96%
Tar
Tartaric acid
Toluene
Transformer oil
Trichlorethylene
Water
White spirit
Xylene
Carbon disulphide
17
The recommendations made here are intended as a guideline for the
selection of a suitable gasket. The function and durability of these
products depends upon a number of factors.
Chemical resistance chart for focus products
DONIT_Gasket sheets_Brochure2015.indd 18 1/20/15 11:55 AM
19. 18
Doniflon is a range of high grade gasket materials based on modified PTFE or multidirectional expanded PTFE and it has
many general application possibilities.
PROPERTIES
Composition PTFE.
Colour White, Blue, Fawn
Properties
Excellent chemical resistance. Versatile use with a wide
range of chemicals (depending on the chosen Doniflon
material).
Appropriate industries
Chemical industry, food industry, pharmaceutical
industry.
Approvals On request.
DIMENSIONS AVAILABLE OPTIONS
Sheet size and thickness depend on type of
Doniflon.
900E, 2010, 2020, 2030
TECHNICAL DATA Typical values for a thickess of 2 mm
900E 2010 2020 2030
Density DIN 28090-2 g/cm3
0.9 1.5 2.1 3.0
Compressibility ASTM F36J % 55 35 7 6
Recovery ASTM F36J % 12 40 45 40
Tensile strength ASTM F152 MPa 32 14 14 10
Stress resistance DIN 52913
16 h, 30 MPa, 150 °C MPa 16 14 13 13
Specific leak rate DIN 3535-6 mg/(s.m) 0.002 0.002 0.002 0.002
pH range 0-14 0-14 0-14 0-14
Operating conditions
Minimum temperature °C/°F -200/-328 -200/-328 -200/-328 -200/-328
Maximum temperature °C/°F 260/500 260/500 260/500 260/500
Pressure bar/psi 100/1450 60/870 80/1160 80/1160
DONIFLON
DONIT_Gasket sheets_Brochure2015.indd 19 1/20/15 11:55 AM
20. 2010
2020
2030
900E
Acetamide
Acetic acid 10%
Acetic acid 100%
Adipic acid
Air
Alum
Aluminium acetate
Aluminium chloride
Ammonia, liquid or gas
Ammonium bicarbonate
Ammonium chloride
Ammonium hydroxide
Amyl acetate
Aniline
Asphalt
Barium chloride
Benzene
Benzoic acid
Boric acid
Borax
Butane
Butyl alcohol
Butyric acid
Calcium chloride
Calcium hydroxide
Carbon dioxide
Carbon disulphide
Chloroform
Chromic acid
Citric acid
Copper acetate
Creosote
Cresol
Cyclohexanol
Cyclohexanone
Dibenzyl ether
Dimethyl formamide
Dowtherm
Ethane
Ethyl acetate
Ethyl alcohol
Ethyl chloride
Ethylene
Ethylene glycol
Formic acid
Formaldehyde
Freon 12
Freon 22
Fuel oil
Gasoline
Glycerine
Heptane
Hydraulic oil (Mineral)
Hydrazine
Hydrogen
Isobutane
2010
2020
2030
900E
Isooctane
Isopropyl alcohol
Kerosene
Lead acetate
Lead arsenate
Magnesium sulphate
Malic acid
Methane
Methanol
Methyl chloride
Methyl ethyl ketone
Milk
Naphtha
Nitrobenzene
Nitrogen
Octane
Oleic acid
Oleum
Oxalic acid
Oxygen
Palmitic acid
Pentane
Perchloroethylene
Phenol
Potassium acetate
Potassium chloride
Potassium dichromate
Potassium hydroxide
Potassium iodide
Potassium nitrate
Potassium permanganate
Propane
Pyridine
Salicylic acid
Silicone oil
Soap
Sodium aluminate
Sodium bicarbonate
Sodium bisulphite
Sodium chloride
Sodium cyanide
Sodium hydroxide
Sodium sulphate
Sodium sulphide
Starch
Steam
Stearic acid
Sugar
Tar
Tartaric acid
Toluene
Transformer oil
Trichlorethylene
Water
White spirit
Xylene
All information, and data quoted are based on years of experience in production and operation
of sealing elements. The data may not, be used to support any warranty claims.
This edition cancels all previous issues, and is a subject to change without further notice.
The recommendations made here are intended to be a guideline for the selection of the
suitable gasket quality. Because the function and durability of the products depend upon
a number of factors, the data may not be used to support any warranty claims.
Recommended
Recommendation depends on operating conditions
Not recommended
Chemical Resistance Chart for Doniflon
19
The recommendations made here are intended as a guideline for the
selection of a suitable gasket. The function and durability of these
products depends upon a number of factors.
Chemical resistance chart for Doniflon
DONIT_Gasket sheets_Brochure2015.indd 20 1/20/15 11:55 AM
21. 20
Doniflex®
is a gasket material made from a combination of aramid fibers, specially selected fillers, graphite and as
required steel, which are combined to form an environmentally friendly gasket material. It has excellent thermal and
chemical properties, excellent resistances to various media and many application possibilities.
PROPERTIES
Composition
Graphite, aramid fibers, NBR, steel reinforcement also
available.
Colour Grey
Properties
Excellent thermal and chemical properties along with an
excellent resistance to various substances. Environment
friendly.
Appropriate industries
Petrochemicals, chemical industry, pulp and paper
production, food industry, power plants, automotive
industry, shipbuilding.
Approvals WRAS, TA-Luft (VDI 2440), DVGW W270
DIMENSIONS AVAILABLE OPTIONS
Sheet size and thickness depend on type
of Doniflex.
G-LD, G-MD, G-HD, G-CP, G-EM, G-SP
TECHNICAL DATA
G-LD G-MD G-HD G-CP G-EM G-SP
Typical values for a thickness of: 2 mm 1 mm 1.5 mm 2 mm 2 mm 1 mm
Density DIN 28090-2 g/cm3
1.2 1.4 1.5 1.8 1.7 1.9
Compressibility ASTM F36J % 35 20 15 20 20 20
Recovery ASTM F36J % 17 32 45 25 30 33
Tensile strength ASTM F152 MPa 4.5 9 8 10 15 35
Stress resistance DIN 52913
16 h, 50 MPa, 175 °C MPa 40 45 42 42 40 46
16 h, 50 MPa, 300 °C MPa 35 40 38 38 35 44
Specific leak rate DIN 3535-6 mg/(s.m) 0.5 0.3 0.1 0.15 0.1 0.3
Thickness increase ASTM F146
Oil IRM 903, 5 h, 150 °C % 3 5 5 5 8 6
ASTM Fuel B, 5 h, 23 °C % 2 5 5 5 8 5
Weight increase
Oil IRM 903, 5 h, 150 °C % 30 20 15 15 18 15
ASTM Fuel B, 5 h, 23 °C % 25 17 15 15 18 12
DONIFLEX®
DONIT_Gasket sheets_Brochure2015.indd 21 1/20/15 11:55 AM
22. Acetamide
Acetic acid 10%
Acetic acid 100%
Acetic ester
Acetone
Acetylene
Adipic acid
Air
Alum
Aluminium acetate
Aluminium chlorate
Aluminium chloride
Ammonia
Ammonium bicarbonate
Ammonium chloride
Ammonium hydroxide
Amyl acetate
Aniline
Asphalt
Barium chloride
Benzene
Benzoic acid
Boric acid
Borax
Butane
Butyl alcohol
Butyric acid
Calcium chloride
Calcium hydroxide
Carbon dioxide
Carbon disulphide
Chloroform
Chlorine, dry
Chlorine, wet
Chromic acid
Citric acid
Copper acetate
Creosote
Cresol
Cyclohexanol
Cyclohexanone
Decalin
Dibenzyl ether
Dimethyl formamide
Dowtherm
Ethane
Ethyl acetate
Ethyl alcohol
Ethyl chloride
Ethylene
Ethylene glycol
Formic acid 10%
Formic acid 85%
Formaldehyde
Freon 12
Freon 22
Fuel oil
Gasoline
Glycerine
Heptane
Hydraulic oil (Mineral)
Hydraulic oil (Phosphate ester type)
Hydraulic oil (Glycol based)
Hydrazine
Hydrochloric acid 20%
Hydrochloric acid 36%
Hydrofluoric acid 10%
Hydrofluoric acid 40%
Hydrogen
Isobutane
Isooctane
Isopropyl alcohol
Kerosene
Lead acetate
Lead arsenate
Magnesium sulphate
Malic acid
Methane
Methanol
Methyl chloride
Methylene dichloride
Methyl ethyl ketone
Milk
Mineral oil type ASTM no.1
Naphtha
Nitric acid 20%
Nitric acid 40%
Nitric acid 96%
Nitrobenzene
Nitrogen
Octane
Oleic acid
Oleum
Oxalic acid
Oxygen
Palmitic acid
Pentane
Perchloroethylene
Peracetic acid 15%
Phenol
Phosphoric acid
Potassium acetate
Potassium bicarbonate
Potassium carbonate
Potassium chloride
Potassium dichromate
Potassium hydroxide
Potassium iodide
Potassium nitrate
Potassium permanganate
Propane
Pyridine
R 134a
Salicylic acid
Silicone oil
Soap
Sodium aluminate
Sodium bicarbonate
Sodium bisulphite
Sodium carbonate
Sodium chloride
Sodium cyanide
Sodium hydroxide
Sodium sulphate
Sodium sulphide
Starch
Steam
Stearic acid
Sugar
Sulphuric acid 20%
Sulphuric acid 96%
Tar
Tartaric acid
Toluene
Transformer oil
Trichlorethylene
Water
White spirit
Xylene
DONIFLEX
DONIFLEX
DONIFLEX
The recommendations made here are intended as a guideline for the selection of
a suitable gasket. The function and durability of these products depends upon a
number of factors.
Chemical resistance chart for Doniflex
G-LD G-MD G-HD G-CP G-EM G-SP
Typical values for a thickness of: 2 mm 1 mm 1.5 mm 2 mm 2 mm 1 mm
Compression modulus DIN 28090-2
At room temperature: εKSW
% 26 / 6 / / /
At elevated temperature: εWSW/200 °C
% 5 / 6 / / /
Percentage creep relaxation DIN 28090-2
At room temperature: εKRW
% 3.0 / 4.0 / / /
At elevated temperature: εWRW/200 °C
% 0.5 / 0.5 / / /
Creep deformation
Change in thickness at 20 °C, 50 MPa % 33 18 15 10 18 12
Change in thickness at 300 °C, 50 MPa % 8 10 7 10 8 6
Change in thickness at 400 °C, 50 MPa % / / / 12 / 8
21
Recommended
Recommendation depends on operating conditions
Not recommended
DONIT_Gasket sheets_Brochure2015.indd 22 1/20/15 11:55 AM
23. 22
PROPERTIES
Composition Flexible graphite sheets.
Colour Black
Properties
Available with a stainless steel insertion. Excellent
strength and creep resistance, chemical stability and a
high tightness rate.
Appropriate industries
Chemical industry, petrochemicals, power plants,
food industry.
Approvals
BAM (Oxygen), DIN-DVGW DIN 3535-6, DVGW VP 401,
API 607, Germanischer Lloyd
DIMENSIONS OF STANDARD SHEETS AVAILABLE OPTIONS
Sheet size (mm): 1000 x 1000 | 1500 x 1500
Thickness (mm): 1.0 | 1.5 | 2.0 | 3.0
Other dimensions and thicknesses available on
request.
SF, SL, SP, EM
TECHNICAL DATA
Typical values for a thickness of 1.5 mm SF SL SP EM
Density DIN 28090-2 g/cm3
1.0 1.3 1.5 1.4
Compressibility ASTM F36A % 45 42 35 35
Recovery ASTM F36A % 13 15 17 20
Stress resistance DIN 52913
16 h, 50 MPa, 300 °C MPa 49 49 49 49
Specific leak rate DIN 3535-6 mg/(s.m) 0.05 0.05 0.05 0.05
Leachable chloride content FSA NMG 202 ppm 20 20 20 20
Leachable fluoride content FSA NMG 203 ppm 20 20 20 20
Ash content of graphite DIN 51903 % 1 1 1 1
Compression modulus DIN 28090-2
At room temperature: εKSW
% 41 38 34 32
At elevated temperature: εWSW/300˚C
% 0.9 1.2 1.2 2.5
Percentage creep relaxation DIN 28090-2
At room temperature: εKSW
% 5.0 4.3 4.2 4.5
At elevated temperature: εWSW/300˚C
% 4.0 3.6 3.3 3.5
Max. operating conditions
Minimum temperature ˚C/˚F -200/-328 -200/-328 -200/-328 -200/-328
Continuous temperature
- oxidizing atmosphere ˚C/˚F 550/1022 550/1022 550/1022 550/1022
- reducing or inert atmosphere ˚C/˚F 1000/1832 700/1292 700/1292 700/1292
Pressure bar/psi 80/1160 100/1450 200/1450 200/1450
Grafilit®
is a high grade gasket material based on flexible graphite sheets and is available with a stainless steel insertion,
which allows use for many application possibilities. It has excellent strength and creep resistance, chemical stability and
a high tightness rate.
GRAFILIT®
DONIT_Gasket sheets_Brochure2015.indd 23 1/20/15 11:55 AM
24. 23
Acetamide
Acetic acid 10%
Acetic acid 100%
Acetic ester
Acetone
Acetylene
Adipic acid
Air
Alum
Aluminium acetate
Aluminium chlorate
Aluminium chloride
Ammonia
Ammonium bicarbonate
Ammonium chloride
Ammonium hydroxide
Amyl acetate
Aniline
Asphalt
Barium chloride
Benzene
Benzoic acid
Boric acid
Borax
Butane
Butyl alcohol
Butyric acid
Calcium chloride
Calcium hydroxide
Carbon dioxide
Chloroform
Chlorine, dry
Chlorine, wet
Chromic acid
Citric acid
Copper acetate
Creosote
Cresol
Cyclohexanol
Cyclohexanone
Decalin
Dibenzyl ether
Dimethyl formamide
Dowtherm
Ethane
Ethyl acetate
Ethyl alcohol
Ethyl chloride
Ethylene
Ethylene glycol
Formic acid 10%
Formic acid 85%
Formaldehyde
Freon 12
Freon 22
Fuel oil
Gasoline
Glycerine
Heptane
Hydraulic oil (Mineral)
Hydraulic oil (Phosphate ester type)
Hydraulic oil (Glycol based)
Hydrazine
Hydrochloric acid 20%
Hydrofluoric acid 40%
Hydrogen
Isobutane
Isopropyl alcohol
Kerosene
Lead acetate
Lead arsenate
Magnesium sulphate
Malic acid
Methane
Methanol
Methyl chloride
Methylene dichloride
Methyl ethyl ketone
Milk
Mineral oil type ASTM no.1
Naphtha
Nitric acid 20%
Nitric acid 40%
Nitric acid 96%
Nitrobenzene
Nitrogen
Octane
Oleic acid
Oleum
Oxalic acid
Oxygen
Palmitic acid
Pentane
Perchloroethylene
Phenol
Phosphoric acid
Potassium acetate
Potassium bicarbonate
Potassium carbonate
Potassium chloride
Potassium dichromate
Potassium hydroxide
Potassium iodide
Potassium nitrate
Potassium permanganate
Propane
Pyridine
R 134a
Salicylic acid
Silicone oil
Soap
Sodium aluminate
Sodium bicarbonate
Sodium bisulphite
Sodium carbonate
Sodium chloride
Sodium cyanide
Sodium hydroxide
Sodium sulphate
Sodium sulphide
Starch
Steam
Stearic acid
Sugar
Sulphuric acid 20%
Sulphuric acid 96%
Tar
Tartaric acid
Toluene
Transformer oil
Trichlorethylene
Water
White spirit
Xylene
GRAFILIT
GRAFILIT
GRAFILIT
The recommendations made here are intended to be a guideline for the selection of the
suitable gasket quality. Because the function and durability of the products depend upon
a number of factors, the data may not be used to support any warranty claims.
Recommended
Recommendation depends on operating conditions
Not recommended
Chemical Resistance Chart for Grafilit
All information, and data quoted are based on years of experience in production and operation
of sealing elements. The data may not, be used to support any warranty claims.
This edition cancels all previous issues, and is a subject to change without further notice.
23
The recommendations made here are intended as a guideline for the
selection of a suitable gasket. The function and durability of these
products depends upon a number of factors.
Chemical resistance chart for Grafilit
DONIT_Gasket sheets_Brochure2015.indd 24 1/20/15 11:55 AM
25. PROPERTIES
Composition
Aluminosilicate (phlogopite) impregnated with silicon.
It is available as pure mica (MICALIT F) or with stainless
steel insertion AISI 316 0.1 mm (MICALIT P).
Colour Golden
Properties
Very high resistance to temperature (up to 950 °C in
oxidizing atmosphere). Good chemical resistance.
Good electrical insulation and low thermal conductivity
properties.
Appropriate industries
Automotive industry, petrochemicals, steel industry,
power plants, heat exchangers.
DIMENSIONS OF STANDARD SHEETS AVAILABLE OPTIONS
Sheet size (mm): 1000 x 1200
Thickness (mm): 0.4 - 3.0 Micalit F
1.5 | 2.0 | 3.0 Micalit P
Other dimensions available on request.
F, P
TECHNICAL DATA
Typical values for a thickness of 1.5 mm F P
Density DIN 28090-2 g/cm3
1.9 2.0
Compressibility ASTM F36J % 20 20
Recovery ASTM F36J % 35 35
Loss on ignition DIN 52811 % 8 5
Stress resistance DIN 52913
16 h, 50 MPa, 300 °C MPa 38 42
Maximum temperature ˚C/˚F 950/1742 950/1742
2424
Mica is an aluminosilicate material with very high thermal resistance, used for exhaust pipe manifolds, burner flanges,
gas turbine housings, turbocharger flange gaskets.
MICALIT
DONIT_Gasket sheets_Brochure2015.indd 25 1/20/15 11:55 AM
26. Customer care
We have a strong commitment to build a true, open and
reliable partnership with our customers in a way that will
make your everyday business easier. Our customers have
direct approach to their personal sales representative
with engineering background and, when necessary, with
our technical experts.
With this in mind, we offer extranet to our customers,
through which registered users have direct access to:
Entire technical documentation.
All available certificates.
Direct link to your dedicated DONIT contact.
Material selector
Finding the right product within wide range of gaskets is
not an easy task. We make it easier with our web-based
material selector, which provides access to the material
database of the gasket sheets.
25
25
Customer care
We are committed to building a genuine, open and
reliable partnership with all of our customers that will
make your everyday business easier. Our customers have
direct access to their personal sales representatives
with engineering backgrounds and when necessary our
technical experts.
With this in mind, we offer extranet to our customers,
through which registered users have direct access to:
Entire technical documentation of product data sheets.
All available certificates.
Direct contact details for your dedicated DONIT
contacts.
Material selector
Finding the right product within our wide range of gasket
materials is not an easy task. We make it easier with our
web-based material selector, which provides access to our
entire materials database for gasket sheets.
TESNIT BA-203
TESNIT BA-202
GRAFILIT
TESNIT® BA-202 is our
standard gasket sheet, suitable
for sealing applications at low
operating conditions.
TESNIT® BA-203 is a special
gasket material based on
aramid fibers and NBR rubber,
suitable for lower to medium
operating conditions.
Grafilit® is a high grade gasket material
based on flexible graphite sheets and is
available with a stainless steel insertion,
which allows for many application
possibilities. It has excellent strength and
creep resistance, chemical stability and a
high tightness rate.
DONIT_Gasket sheets_Brochure2015.indd 26 1/20/15 11:55 AM
27. Contact information
DONIT Tesnit®
, d.o.o.
Cesta komandanta Staneta 38
1215 Medvode
Slovenia
Phone:
+386 (0)1 582 33 00
Fax:
+386 (0)1 582 32 06
+386 (0)1 582 32 08
Suzhou Donit Sealing Materials
Import and Export Co., Ltd.
No. 8 Suzhou Avenue West,
Bank of Chine Building, Room
1904, SIP, 215021, P.R. China
Phone:
+86 (0)512 659 535 29
Tolerances for BA materials:
+/- 5 % on length and width
On thickness up to 1.0 mm +/- 0.1 mm
On thickness above 1.0 mm +/- 10 %
Disclaimer
All information and data quoted are based upon years of experience in the
production and operation of sealing elements. This data may not be used to
support any warranty claims.
With its publication this latest edition supersedes all previous issues and is
subject to change without further notice.
Date of issue: 16. 1. 2015
Web:
www.donit.eu
E-mail:
info@donit.eu
DONIT_Gasket sheets_Brochure2015.indd 27 1/20/15 11:55 AM