Over 60% of businesses close within 2 years of experiencing a major disaster due to the psychological trauma experienced by key decision-makers that leads to inflexibility in dealing with change. Proper mitigation techniques and restoring property, including removing contaminants from equipment, to the pre-loss condition can mean the difference between full recovery or catastrophic loss. Coordinating restoration of structures, contents, and assets is crucial in recovery efforts following events like fires or floods.
Accidents occur due to a combination of unsafe acts and unsafe conditions. Unsafe acts include not following safety procedures, taking shortcuts, or being distracted. Unsafe conditions involve poor housekeeping, lack of guards on equipment, or other environmental hazards. A series of factors such as personal limitations, job stresses, lack of training, and poor supervision can contribute to unsafe behaviors and conditions that lead to accidents. Maintaining good housekeeping, following all safety rules, and focusing on the task are important for preventing accidents in the workplace.
The cover story of a US Magazine 'Plant Services'. I've always dreamed of being on the cover of 'Rolling Stones'... Plant Services is OK though since I'm a servant leader. The Process IS the Leader
A disaster is defined as a serious disruption exceeding a community's ability to cope that causes widespread human, material, economic, or environmental losses. Man-made disasters include hazardous materials, power outages, nuclear incidents, explosions, and cyber attacks. The 2014 GAIL pipeline explosion in Andhra Pradesh, India was caused when a spark ignited leaking gas and condensate from the pipeline. It killed 22 people and injured 17 others. Industrial accidents can seriously harm human life and the environment through air, water, and soil pollution. The 2011 Fukushima Daiichi nuclear disaster in Japan was triggered by an earthquake and tsunami that caused nuclear meltdowns and released radiation, contaminating the area and increasing cancer risks.
SAFETY TOOLBOX TALK: Seven Common Accident CausesMARLON RAMIREZ
The document discusses seven common causes of workplace accidents. It notes that 80% of accidents are due to unsafe acts by those involved rather than unsafe conditions. The seven causes are: taking shortcuts, overconfidence, starting tasks without full instructions, poor housekeeping, ignoring safety procedures, mental distractions, and failure to plan work. Addressing these behaviors could help reduce accidents. The document advises workers to learn from it and be careful.
Safety and Training : Material Handling SystemsSusheel Dhale
The document discusses safety and training regarding materials handling accidents in the workplace. It notes that materials handling accidents are very common, regardless of industry, and preventing them requires common sense and proper job design. While automated systems now handle much of the materials, manual handling remains necessary for many tasks and still poses injury risks. The document emphasizes the importance of considering worker needs, both physical and mental, in design to help ensure safety.
Workplace Health and Safety: Tips, Traps and Trends in Health CareBCCPA
Interactive workshop will address key health and safety topics relevant to health care employers. This program will arm participants with a better understanding of WorkSafeBC’s new dual model investigation protocols, new enforcement options including citations and compliance agreements and employers legal obligations to respond to WorkSafe BC orders and enforcement proceedings. It will also provide overview of how WorkSafe BC and WCAT respond to claims by workers that they have been retaliated against for exercising their OH&S rights. It will also review the most recent bullying and harassment claim decisions.
Speakers:
- J. Najeeb Hassen, Partner Roper Greyell
- Alissa Demerse, Partner, Roper Greyell
Sandy Mackie on Restoration vs. MitigationBSH Admin
This document discusses the legal limits of mitigation and restoration requirements imposed by local governments. It defines mitigation as fixing problems created by a project, while restoration fixes problems created by others. The document examines several court cases that found conditions imposed on private property must have an essential nexus and be roughly proportional to the impacts. It also notes restoration goes beyond the standard of protection under growth management and shoreline laws. The document questions whether local governments can rely on regulatory powers to achieve large-scale restoration targets or if public investment is needed. It concludes restoration beyond mitigation can only be achieved through public funds and incentives, not regulatory requirements on private property.
Over 60% of businesses close within 2 years of experiencing a major disaster due to the psychological trauma experienced by key decision-makers that leads to inflexibility in dealing with change. Proper mitigation techniques and restoring property, including removing contaminants from equipment, to the pre-loss condition can mean the difference between full recovery or catastrophic loss. Coordinating restoration of structures, contents, and assets is crucial in recovery efforts following events like fires or floods.
Accidents occur due to a combination of unsafe acts and unsafe conditions. Unsafe acts include not following safety procedures, taking shortcuts, or being distracted. Unsafe conditions involve poor housekeeping, lack of guards on equipment, or other environmental hazards. A series of factors such as personal limitations, job stresses, lack of training, and poor supervision can contribute to unsafe behaviors and conditions that lead to accidents. Maintaining good housekeeping, following all safety rules, and focusing on the task are important for preventing accidents in the workplace.
The cover story of a US Magazine 'Plant Services'. I've always dreamed of being on the cover of 'Rolling Stones'... Plant Services is OK though since I'm a servant leader. The Process IS the Leader
A disaster is defined as a serious disruption exceeding a community's ability to cope that causes widespread human, material, economic, or environmental losses. Man-made disasters include hazardous materials, power outages, nuclear incidents, explosions, and cyber attacks. The 2014 GAIL pipeline explosion in Andhra Pradesh, India was caused when a spark ignited leaking gas and condensate from the pipeline. It killed 22 people and injured 17 others. Industrial accidents can seriously harm human life and the environment through air, water, and soil pollution. The 2011 Fukushima Daiichi nuclear disaster in Japan was triggered by an earthquake and tsunami that caused nuclear meltdowns and released radiation, contaminating the area and increasing cancer risks.
SAFETY TOOLBOX TALK: Seven Common Accident CausesMARLON RAMIREZ
The document discusses seven common causes of workplace accidents. It notes that 80% of accidents are due to unsafe acts by those involved rather than unsafe conditions. The seven causes are: taking shortcuts, overconfidence, starting tasks without full instructions, poor housekeeping, ignoring safety procedures, mental distractions, and failure to plan work. Addressing these behaviors could help reduce accidents. The document advises workers to learn from it and be careful.
Safety and Training : Material Handling SystemsSusheel Dhale
The document discusses safety and training regarding materials handling accidents in the workplace. It notes that materials handling accidents are very common, regardless of industry, and preventing them requires common sense and proper job design. While automated systems now handle much of the materials, manual handling remains necessary for many tasks and still poses injury risks. The document emphasizes the importance of considering worker needs, both physical and mental, in design to help ensure safety.
Workplace Health and Safety: Tips, Traps and Trends in Health CareBCCPA
Interactive workshop will address key health and safety topics relevant to health care employers. This program will arm participants with a better understanding of WorkSafeBC’s new dual model investigation protocols, new enforcement options including citations and compliance agreements and employers legal obligations to respond to WorkSafe BC orders and enforcement proceedings. It will also provide overview of how WorkSafe BC and WCAT respond to claims by workers that they have been retaliated against for exercising their OH&S rights. It will also review the most recent bullying and harassment claim decisions.
Speakers:
- J. Najeeb Hassen, Partner Roper Greyell
- Alissa Demerse, Partner, Roper Greyell
Sandy Mackie on Restoration vs. MitigationBSH Admin
This document discusses the legal limits of mitigation and restoration requirements imposed by local governments. It defines mitigation as fixing problems created by a project, while restoration fixes problems created by others. The document examines several court cases that found conditions imposed on private property must have an essential nexus and be roughly proportional to the impacts. It also notes restoration goes beyond the standard of protection under growth management and shoreline laws. The document questions whether local governments can rely on regulatory powers to achieve large-scale restoration targets or if public investment is needed. It concludes restoration beyond mitigation can only be achieved through public funds and incentives, not regulatory requirements on private property.
This document discusses the need for emergency response planning in challenging business environments in Asia. It begins by outlining common business disruptions like power failures, fires, and civil disturbances. It then defines an emergency as an unplanned event that can cause harm or shut down business operations. Major events are described as sudden, damaging incidents requiring response from external organizations. The document emphasizes the importance of emergency response planning through a case study of how Morgan Stanley successfully evacuated their offices from the World Trade Center on 9/11 through advance planning and drills. It provides an outline of the key components an emergency response plan should contain, such as roles, communication procedures, and training requirements.
This document provides an introduction to health, safety and environmental issues in the oil and gas industry. It discusses why HSE is important given the high-risk nature of the work and potential for catastrophic accidents. Two examples of major accidents, the Piper Alpha platform explosion and Deepwater Horizon oil spill, are described to illustrate the risks. The document then covers hazard identification and risk assessment processes used in the industry. It provides examples of common hazards and approaches to controlling risks, including the use of engineering solutions, administrative controls and personal protective equipment. Training requirements for workers and definitions of key terms like incidents and near misses are also outlined.
This document discusses various industrial hazards found in pharmaceutical manufacturing processes. It covers fire and explosion hazards, mechanical hazards, electrical hazards, thermal hazards, and process hazards. For each hazard type, the document discusses potential causes and recommended preventive measures. It provides an example case study of a manufacturing company that hired a consultant to improve its safety compliance after recognizing gaps in its in-house safety program. The document emphasizes the importance of identifying hazards, implementing engineering and administrative controls, and training workers to reduce risks in industrial processes.
The document provides guidance on survival skills for an urban disaster environment. It discusses priorities for human survival including shelter, fire, signaling, water, and food. It emphasizes the importance of positive mental attitude and being prepared with emergency supplies. Specific tips are provided on shelter construction, fire making, first aid, sanitation, signaling, and obtaining water. The document stresses that in a major catastrophic event, assistance may not arrive for an extended period and individuals must be prepared to be self-reliant.
Disaster Survival Skills for the Urban Environment. Since the 9/11/01 attacks our fire department has been conducting this training for muncipal employees and Citizens Corps groups such as Auxiliary Communiucations Service, CERT, Neighborhood Watch and Medical Reserve Corps. The .ppt is a classroom overview used prior to live training breakout sessions which are conducted at the fire academy.
OBJECTIVES:
Why teach “survival” in the city?
Catastrophes vs. disasters
This is about your SURVIVAL, not volunteering
Priorities for human survival
Break-out sessions:
Shelter construction
Fire making
Signaling
Equipment and supplies
Social implications of disasters
Personal security concerns
Disaster V. Catastrophe
Disasters are short term
“Make do for 3-4 days until help arrives…”
Catastrophic events are long term
Katrina-scale hurricane, tsunami, earthquake
Major terror attack, nuclear detonation, dirty bomb
No help is coming soon, “you are on your own”
Why?
Complete loss of civil infrastructure
Minimal or no police, fire or EMS response
No electricity, municipal water, communications
Transport of fuel / food is severely impaired
Public safety agencies will be overwhelmed
Recovery is long term (over 30 days)
What the military survival schools teach:
Seven Priorities For Survival
"Hope for the best, but prepare for the worst”
Positive mental attitude
First Aid / Sanitation
Shelter
Signaling
Fire
Water
Food
Related materials at the URL:
http://www.w4ava.org/races/KKauxcomm33.htm
This document discusses safety in industrial process plants. It covers the need for safety programs in industries that deal with hazardous materials and large amounts of energy. These safety programs aim to control hazards and reduce risks. Potential hazards addressed include extreme operating conditions, toxic chemicals, and safe chemical handling. The document also discusses human factors in accident prevention through better equipment and machine design tailored to human abilities. It outlines threshold limit values for exposure to various chemicals and substances.
This document discusses challenges related to preserving tenants' technology assets after disasters and minimizing business interruption. It outlines vulnerabilities these assets face from smoke, water, and heat damage. Damage to equipment can result in costly repairs or replacement and business interruption. The document recommends measures before and after disasters, such as assessing risks from building infrastructure like pipes overhead, dedicated air conditioning for server rooms, and immediately backing up data and securing valuable documents after an event. A case study of a 2004 Chicago bank fire that caused over $50 million in damages and displaced thousands of employees is also presented.
How do you deal with the damages from floods and fires that effect computers, office equipment, HVAC equipment and more? This presentation is your guide to emergency response!
Process Safety | Process Safety Management | PSM | Gaurav Singh RajputGaurav Singh Rajput
This document provides an overview of process safety and major accident hazards. It defines process safety as proactively identifying, analyzing, and evaluating releases of hazardous substances and process accidents. The goal is to minimize the risk of major accident events and ensure necessary mitigation and emergency preparedness. Major accidents are defined by their severe consequences for people and the environment. The document discusses past major accidents and emphasizes preventing such events through inherent safety design, barriers, safety management systems, and a safety culture.
This document provides an overview of process safety and major accident hazards. It defines process safety as proactively identifying, analyzing, and evaluating releases of hazardous substances and process accidents. The goal is to minimize the risk of major accident events and ensure necessary mitigation and emergency preparedness. Major accidents are defined by their severe consequences for people and the environment. The document discusses past major accidents and emphasizes preventing such events through inherent safety design, barriers, safety management systems, and safety critical element management.
This document discusses reducing process risks in the pharmaceutical industry. It outlines several driving forces for reducing risk, including plant existence, harm prevention, regulatory requirements, and public image concerns. Several case studies of accidents at pharmaceutical plants are presented to illustrate hazards like explosions and chemical releases. Common causes of accidents included lack of inherently safer design practices, insufficient safety controls, poor hazard awareness, and deficiencies in procedures and maintenance. Reducing risks requires understanding hazards, implementing proper controls, and focusing on priorities like process safety, ergonomics, and hygiene.
1 hr how the water source affects the water claim sa14033aeuse
This document provides information about a property restoration company, including its locations, services, certifications, and the process of drying structures affected by water damage. It emphasizes the importance of an immediate response to water damage and use of Applied Structural Drying methods to minimize costs and liability. Drying involves extraction, air movement, dehumidification, temperature control, and ongoing monitoring until the structure is fully dry.
This document discusses disaster management for industrial and environmental disasters. It covers prevention, preparedness, risk assessment, objectives of disaster management plans, identification and assessment of hazard scenarios, the fire explosion and toxicity index (FETI) method for quantifying hazards, characteristics and treatment of hazardous wastes, steps for developing disaster management plans, features of off-site emergency plans, and measures to take during emergencies. The overall goal is to minimize risks and impacts of industrial disasters on human life, health, safety, and the environment.
The document discusses two incidents at different companies - a utility company and a municipal wastewater plant. Both incidents occurred despite the companies having lower than average injury rates.
The first incident was an arc flash that occurred during maintenance on high voltage equipment at a utility company. A switching procedure was violated which led to workers being exposed to live high voltage.
The second incident was an explosion at a wastewater plant during roof removal work above a methanol storage tank. The flame arrestor on the tank was corroded and inoperative. There were no work procedures or hazard training for the job.
Both incidents were caused by failures in procedures, equipment, training, and safety programs. Contributing factors included lack of
During routine maintenance at an Exxon Mobil refinery, catalyst particles lodged in a door between the regeneration unit and electrostatic precipitator, allowing flammable vapor to escape downstream. The vapor found an ignition source in the precipitator and caused an explosion. The initiating event was catalyst particles blocking the door, which allowed regenerator gases containing coke particles to bypass intended safety systems. This could have been prevented by ensuring proper maintenance and inspection of equipment like doors to avoid any openings that could release flammable materials. Lessons learned include the importance of following safety procedures during maintenance.
This presentation was delivered by Bell Energy as part of training program in 2013. It provides the reader, basic to intermediate level of information on the use of Bowties for managing Hazards & Effects. Bowties can be used by any industry whether they are Oil & Gas, Finance, Banks, Aviation, Power, Nuclear, Construction, Infrastructure. To know more about bowties, please visit www.bell-energy.com or contact us on uaeoffice@bell-energy.net
Industrial safety in the pharmaceutical industry aims to reduce risks from hazards like toxic chemicals, fires, dust, and machinery. Chemical hazards include irritants, asphyxiants, narcotics, and carcinogens. Fires can be caused by defects in equipment, smoking, or gas leaks. Dust is generated during processes like grinding, mixing, and packaging. Machinery hazards involve moving parts that may snag or crush workers. Proper ventilation, protective equipment, training, and emergency plans are needed to prevent accidents and protect workers from these various industrial hazards.
How to Get CNIC Information System with Paksim Ga.pptxdanishmna97
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024Neo4j
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
This document discusses the need for emergency response planning in challenging business environments in Asia. It begins by outlining common business disruptions like power failures, fires, and civil disturbances. It then defines an emergency as an unplanned event that can cause harm or shut down business operations. Major events are described as sudden, damaging incidents requiring response from external organizations. The document emphasizes the importance of emergency response planning through a case study of how Morgan Stanley successfully evacuated their offices from the World Trade Center on 9/11 through advance planning and drills. It provides an outline of the key components an emergency response plan should contain, such as roles, communication procedures, and training requirements.
This document provides an introduction to health, safety and environmental issues in the oil and gas industry. It discusses why HSE is important given the high-risk nature of the work and potential for catastrophic accidents. Two examples of major accidents, the Piper Alpha platform explosion and Deepwater Horizon oil spill, are described to illustrate the risks. The document then covers hazard identification and risk assessment processes used in the industry. It provides examples of common hazards and approaches to controlling risks, including the use of engineering solutions, administrative controls and personal protective equipment. Training requirements for workers and definitions of key terms like incidents and near misses are also outlined.
This document discusses various industrial hazards found in pharmaceutical manufacturing processes. It covers fire and explosion hazards, mechanical hazards, electrical hazards, thermal hazards, and process hazards. For each hazard type, the document discusses potential causes and recommended preventive measures. It provides an example case study of a manufacturing company that hired a consultant to improve its safety compliance after recognizing gaps in its in-house safety program. The document emphasizes the importance of identifying hazards, implementing engineering and administrative controls, and training workers to reduce risks in industrial processes.
The document provides guidance on survival skills for an urban disaster environment. It discusses priorities for human survival including shelter, fire, signaling, water, and food. It emphasizes the importance of positive mental attitude and being prepared with emergency supplies. Specific tips are provided on shelter construction, fire making, first aid, sanitation, signaling, and obtaining water. The document stresses that in a major catastrophic event, assistance may not arrive for an extended period and individuals must be prepared to be self-reliant.
Disaster Survival Skills for the Urban Environment. Since the 9/11/01 attacks our fire department has been conducting this training for muncipal employees and Citizens Corps groups such as Auxiliary Communiucations Service, CERT, Neighborhood Watch and Medical Reserve Corps. The .ppt is a classroom overview used prior to live training breakout sessions which are conducted at the fire academy.
OBJECTIVES:
Why teach “survival” in the city?
Catastrophes vs. disasters
This is about your SURVIVAL, not volunteering
Priorities for human survival
Break-out sessions:
Shelter construction
Fire making
Signaling
Equipment and supplies
Social implications of disasters
Personal security concerns
Disaster V. Catastrophe
Disasters are short term
“Make do for 3-4 days until help arrives…”
Catastrophic events are long term
Katrina-scale hurricane, tsunami, earthquake
Major terror attack, nuclear detonation, dirty bomb
No help is coming soon, “you are on your own”
Why?
Complete loss of civil infrastructure
Minimal or no police, fire or EMS response
No electricity, municipal water, communications
Transport of fuel / food is severely impaired
Public safety agencies will be overwhelmed
Recovery is long term (over 30 days)
What the military survival schools teach:
Seven Priorities For Survival
"Hope for the best, but prepare for the worst”
Positive mental attitude
First Aid / Sanitation
Shelter
Signaling
Fire
Water
Food
Related materials at the URL:
http://www.w4ava.org/races/KKauxcomm33.htm
This document discusses safety in industrial process plants. It covers the need for safety programs in industries that deal with hazardous materials and large amounts of energy. These safety programs aim to control hazards and reduce risks. Potential hazards addressed include extreme operating conditions, toxic chemicals, and safe chemical handling. The document also discusses human factors in accident prevention through better equipment and machine design tailored to human abilities. It outlines threshold limit values for exposure to various chemicals and substances.
This document discusses challenges related to preserving tenants' technology assets after disasters and minimizing business interruption. It outlines vulnerabilities these assets face from smoke, water, and heat damage. Damage to equipment can result in costly repairs or replacement and business interruption. The document recommends measures before and after disasters, such as assessing risks from building infrastructure like pipes overhead, dedicated air conditioning for server rooms, and immediately backing up data and securing valuable documents after an event. A case study of a 2004 Chicago bank fire that caused over $50 million in damages and displaced thousands of employees is also presented.
How do you deal with the damages from floods and fires that effect computers, office equipment, HVAC equipment and more? This presentation is your guide to emergency response!
Process Safety | Process Safety Management | PSM | Gaurav Singh RajputGaurav Singh Rajput
This document provides an overview of process safety and major accident hazards. It defines process safety as proactively identifying, analyzing, and evaluating releases of hazardous substances and process accidents. The goal is to minimize the risk of major accident events and ensure necessary mitigation and emergency preparedness. Major accidents are defined by their severe consequences for people and the environment. The document discusses past major accidents and emphasizes preventing such events through inherent safety design, barriers, safety management systems, and a safety culture.
This document provides an overview of process safety and major accident hazards. It defines process safety as proactively identifying, analyzing, and evaluating releases of hazardous substances and process accidents. The goal is to minimize the risk of major accident events and ensure necessary mitigation and emergency preparedness. Major accidents are defined by their severe consequences for people and the environment. The document discusses past major accidents and emphasizes preventing such events through inherent safety design, barriers, safety management systems, and safety critical element management.
This document discusses reducing process risks in the pharmaceutical industry. It outlines several driving forces for reducing risk, including plant existence, harm prevention, regulatory requirements, and public image concerns. Several case studies of accidents at pharmaceutical plants are presented to illustrate hazards like explosions and chemical releases. Common causes of accidents included lack of inherently safer design practices, insufficient safety controls, poor hazard awareness, and deficiencies in procedures and maintenance. Reducing risks requires understanding hazards, implementing proper controls, and focusing on priorities like process safety, ergonomics, and hygiene.
1 hr how the water source affects the water claim sa14033aeuse
This document provides information about a property restoration company, including its locations, services, certifications, and the process of drying structures affected by water damage. It emphasizes the importance of an immediate response to water damage and use of Applied Structural Drying methods to minimize costs and liability. Drying involves extraction, air movement, dehumidification, temperature control, and ongoing monitoring until the structure is fully dry.
This document discusses disaster management for industrial and environmental disasters. It covers prevention, preparedness, risk assessment, objectives of disaster management plans, identification and assessment of hazard scenarios, the fire explosion and toxicity index (FETI) method for quantifying hazards, characteristics and treatment of hazardous wastes, steps for developing disaster management plans, features of off-site emergency plans, and measures to take during emergencies. The overall goal is to minimize risks and impacts of industrial disasters on human life, health, safety, and the environment.
The document discusses two incidents at different companies - a utility company and a municipal wastewater plant. Both incidents occurred despite the companies having lower than average injury rates.
The first incident was an arc flash that occurred during maintenance on high voltage equipment at a utility company. A switching procedure was violated which led to workers being exposed to live high voltage.
The second incident was an explosion at a wastewater plant during roof removal work above a methanol storage tank. The flame arrestor on the tank was corroded and inoperative. There were no work procedures or hazard training for the job.
Both incidents were caused by failures in procedures, equipment, training, and safety programs. Contributing factors included lack of
During routine maintenance at an Exxon Mobil refinery, catalyst particles lodged in a door between the regeneration unit and electrostatic precipitator, allowing flammable vapor to escape downstream. The vapor found an ignition source in the precipitator and caused an explosion. The initiating event was catalyst particles blocking the door, which allowed regenerator gases containing coke particles to bypass intended safety systems. This could have been prevented by ensuring proper maintenance and inspection of equipment like doors to avoid any openings that could release flammable materials. Lessons learned include the importance of following safety procedures during maintenance.
This presentation was delivered by Bell Energy as part of training program in 2013. It provides the reader, basic to intermediate level of information on the use of Bowties for managing Hazards & Effects. Bowties can be used by any industry whether they are Oil & Gas, Finance, Banks, Aviation, Power, Nuclear, Construction, Infrastructure. To know more about bowties, please visit www.bell-energy.com or contact us on uaeoffice@bell-energy.net
Industrial safety in the pharmaceutical industry aims to reduce risks from hazards like toxic chemicals, fires, dust, and machinery. Chemical hazards include irritants, asphyxiants, narcotics, and carcinogens. Fires can be caused by defects in equipment, smoking, or gas leaks. Dust is generated during processes like grinding, mixing, and packaging. Machinery hazards involve moving parts that may snag or crush workers. Proper ventilation, protective equipment, training, and emergency plans are needed to prevent accidents and protect workers from these various industrial hazards.
How to Get CNIC Information System with Paksim Ga.pptxdanishmna97
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024Neo4j
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
Best 20 SEO Techniques To Improve Website Visibility In SERPPixlogix Infotech
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Removing Uninteresting Bytes in Software FuzzingAftab Hussain
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slackshyamraj55
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Infrastructure Challenges in Scaling RAG with Custom AI modelsZilliz
Building Retrieval-Augmented Generation (RAG) systems with open-source and custom AI models is a complex task. This talk explores the challenges in productionizing RAG systems, including retrieval performance, response synthesis, and evaluation. We’ll discuss how to leverage open-source models like text embeddings, language models, and custom fine-tuned models to enhance RAG performance. Additionally, we’ll cover how BentoML can help orchestrate and scale these AI components efficiently, ensuring seamless deployment and management of RAG systems in the cloud.
Pushing the limits of ePRTC: 100ns holdover for 100 daysAdtran
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
HCL Notes and Domino License Cost Reduction in the World of DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
TrustArc Webinar - 2024 Global Privacy SurveyTrustArc
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Full-RAG: A modern architecture for hyper-personalizationZilliz
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Essentials of Automations: The Art of Triggers and Actions in FMESafe Software
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
48. Importance of Asset Restoration Most equipment contains cooling fans, which draw in moisture and contaminants, depositing a dangerous mixture that combines with dust already present and can cause failure.
53. Decontamination Sensitive electrical and electronic equipment must be cleaned with appropriate specialized cleaning solutions. Using the wrong chemicals could ruin equipment!